Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Book”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86Linked to original sources
USGS2011

Applications of Groundwater Helium

Helium abundance and isotope variations have widespread application in groundwater-related studies. This stems from the inert nature of this noble gas and the fact that its two isotopes ? helium-3 and helium-4 ? have distinct origins and vary widely in different terrestrial reservoirs. These attributes allow He concentrations and 3He/4He isotope ratios to be used to recognize and quantify the influence of a number of potential contributors to the total He budget of a groundwater sample. These are atmospheric components, such as air-equilibrated and air-entrained He, as well as terrigenic components, including in situ (aquifer) He, deep crustal and/or mantle He and tritiogenic 3He. Each of these components can be exploited to reveal information on a number of topics, from groundwater chronology, through degassing of the Earth?s crust to the role of faults in the transfer of mantle-derived volatiles to the surface. In this review, we present a guide to how groundwater He is collected from aquifer systems and quantitatively measured in the laboratory. We then illustrate the approach of resolving the measured He characteristics into its component structures using assumptions of endmember compositions. This is followed by a discussion of the application of groundwater He to the types of topics mentioned above using case studies from aquifers in California and Australia. Finally, we present possible future research directions involving dissolved He in groundwater.

Book chapter↗
USGS2011

Isotopic tracing of perchlorate in the environment

Isotopic measurements can be used for tracing the sources and behavior of environmental contaminants. Perchlorate (ClO 4 − ) has been detected widely in groundwater, soils, fertilizers, plants, milk, and human urine since 1997, when improved analytical methods for analyzing ClO 4 − concentration became available for routine use. Perchlorate ingestion poses a risk to human health because of its interference with thyroidal hormone production. Consequently, methods for isotopic analysis of ClO 4 − have been developed and applied to assist evaluation of the origin and migration of this common contaminant. Isotopic data are now available for stable isotopes of oxygen and chlorine, as well as 36 Cl isotopic abundances, in ClO 4 − samples from a variety of natural and synthetic sources. These isotopic data provide a basis for distinguishing sources of ClO 4 − found in the environment, and for understanding the origin of natural ClO 4 − . In addition, the isotope effects of microbial ClO 4 − reduction have been measured in laboratory and field experiments, providing a tool for assessing ClO 4 − attenuation in the environment. Isotopic data have been used successfully in some areas for identifying major sources of ClO 4 − contamination in drinking water supplies. Questions about the origin and global biogeochemical cycle of natural ClO 4 − remain to be addressed; such work would benefit from the development of methods for preparation and isotopic analysis of ClO 4 − in samples with low concentrations and complex matrices.

Book chapter↗
USGS2010

Oscillating load-induced acoustic emission in laboratory experiment

Spatial and temporal patterns of acoustic emission (AE) were studied. A pre-fractured cylinder of granite was loaded in a triaxial machine at 160 MPa confining pressure until stick-slip events occurred. The experiments were conducted at a constant strain rate of 10 −7 s −1 that was modulated by small-amplitude sinusoidal oscillations with periods of 175 and 570 seconds. Amplitude of the oscillations was a few percent of the total load and was intended to simulate periodic loading observed in nature (e.g., earth tides or other sources). An ultrasonic acquisition system with 13 piezosensors recorded acoustic emissions that were generated during deformation of the sample. We observed a correlation between AE response and sinusoidal loading. The effect was more pronounced for higher frequency of the modulating force. A time-space spectral analysis for a “point” process was used to investigate details of the periodic AE components. The main result of the study was the correlation of oscillations of acoustic activity synchronized with the applied oscillating load. The intensity of the correlated AE activity was most pronounced in the “aftershock” sequences that followed large-amplitude AE events. We suggest that this is due to the higher strain-sensitivity of the failure area when the sample is in a transient, unstable mode. We also found that the synchronization of AE activity with the oscillating external load nearly disappeared in the period immediately after the stick-slip events and gradually recovered with further loading.

Book chapter↗
USGS2010

Biological phosphorus cycling in dryland regions

The relatively few studies done on phosphorus (P) cycling in arid and semiarid lands (drylands) show many factors that distinguish P cycling in drylands from that in more mesic regions. In drylands, most biologically relevant P inputs and losses are from the deposition and loss of dust. Horizontal and vertical redistribution of P is an important process. P is concentrated at the soil surface and thus vulnerable to loss via erosion. High pH and CaCO 3 limit P bioavailability, and low rainfall limits microbe and plant ability to free abiotically bound P via exudates, thus making it available for uptake. Many invasive plants are able to access recalcitrant P more effectively than are native plants. As P availability depends on soil moisture and temperature, climate change is expected to have large impacts on P cycling.

Book chapter↗
USGS2014

Mount St. Helens, Washington, USA

May 18, 1980. Sunrise and a crystal-clear morning. Mount St. Helens was a beautiful, peaceful, snow-capped mountain surrounded by pristine forests and lakes(Fig. 15.1). Yes, it was known to be spitting ash and shaking, but it was still fundamentally the same Mount St. Helens that had for decades been a favorite camping and fishing destination of local residents. At 8:32 a.m. Mount St. Helens turned ugly, unleashing a mind-boggling landslide that left a huge crater where the peak had been and a thick jumble of rock with an average thickness of 150-feet (45.7 m) filling the lush valley that once led to much-beloved Spirit Lake.

Washington↗
USGS2011

Late quaternary climate variations reflected in Baltic Sea sediments

Late Pleistocene to Holocene climate change of the Atlantic and the northern European realm is reflected by the facies of sediments in the Baltic Sea. The sedimentary sequence have been subdivided into zones reflecting the main postglacial stages of the Baltic Sea basin development according to sediment echosounder profiling and investigating sediment cores from the central Baltic. The changes in the environment of Baltic Sea bottom water is displayed by sediment physical, geochemical, and microfossil proxies. These proxies mark the main shift in the sedimentary facies of the Baltic Basin at 8.14 cal. years BP, from a freshwater to a brackish/marine environment due to the Littorina transgression of marine water masses from the North Sea. The downhole physical facies variation from the Eastern Gotland can be correlated basinwide. Thickness maps of the freshwater and the brackish sediments ascribe the general change in the hydrographic circulation from a coast-to-basin to a basin-to-basin system along with the Littorina transgression. Variations in the salinity of the brackish Littorina Baltic Basin are attributed to changes in the North Atlantic Oscillation (NAO) ascribing the wind forces driving the inflow of marine water into the Baltic Basin. Time series analysis of facies variation reveals distinct periodicities of 900 and 1,500 years. These periods can be compared with data from North Atlantic marine sediments and Greenland ice cores identifying global climate change effects in Baltic Basin sediments.

Book chapter↗
USGS2004

The Chesapeake Bay Crater: Geology and geophysics of a Late Eocene submarine impact structure

The list of impact craters documented on Earth is short. Only about 165 genuine impact structures have been identified to date (Table 1.1). Even so, the number is steadily increasing at the rate of ∼3–5 per year (Grieve et al. 1995; Earth Impact Database at http://www.unb.ca/passc/Impact/Database/). In stark contrast, most other rocky planets and satellites of our solar system are pockmarked by thousands to hundreds of thousands of impact features (Beatty et al. 1999). Nevertheless, impact specialists acknowledge that Earth, too, has undergone billions of years of bolide bombardment (Melosh 1989; Schoenberg et al. 2002). The most intense bombardment, however, took place during Earth’s earliest history (∼3.8–4 Ga; Ryder 1990; Cohen et al. 2000; Ryder et al. 2000). Traces of most terrestrial impacts have been completely erased or strongly altered by the dynamic processes of a thick atmosphere, deep ocean, and mobile crust, a combination unique to our planet. Planetary geologists now recognize that processes associated with bolide impacts are fundamental to planetary accretion and surface modification (Melosh 1989; Peucker-Ehrenbrink and Schmitz 2001). Incoming meteorites may have been primary sources for Earth’s water, and, perhaps, even organic life as we know it (Thomas et al. 1997; Kring 2000). There is little doubt that impacts played a major role in the evolution of Earth’s biota (Ryder et al. 1996; Hart 1996).

Maryland; Virginia↗
USGS2013

Land surface phenology

Certain vegetation types (e.g., deciduous shrubs, deciduous trees, grasslands) have distinct life cycles marked by the growth and senescence of leaves and periods of enhanced photosynthetic activity. Where these types exist, recurring changes in foliage alter the reflectance of electromagnetic radiation from the land surface, which can be measured using remote sensors. The timing of these recurring changes in reflectance is called land surface phenology (LSP). During recent decades, a variety of methods have been used to derive LSP metrics from time series of reflectance measurements acquired by satellite-borne sensors. In contrast to conventional phenology observations, LSP metrics represent the timing of reflectance changes that are driven by the aggregate activity of vegetation within the areal unit measured by the satellite sensor and do not directly provide information about the phenology of individual plants, species, or their phenophases. Despite the generalized nature of satellite sensor-derived measurements, they have proven useful for studying changes in LSP associated with various phenomena. This chapter provides a detailed overview of the use of satellite remote sensing to monitor LSP. First, the theoretical basis for the application of satellite remote sensing to the study of vegetation phenology is presented. After establishing a theoretical foundation for LSP, methods of deriving and validating LSP metrics are discussed. This chapter concludes with a discussion of major research findings and current and future research directions.

Book chapter↗
USGS2015

Risk management of El Chichón and Tacaná Volcanoes: Lessons learned from past volcanic crises: Chapter 8

Before 1985, Mexico lacked civil-protection agencies with a mission to prevent and respond to natural and human-caused disasters; thus, the government was unprepared for the sudden eruption of El Chichón Volcano in March–April 1982, which produced the deadliest volcanic disaster in the country’s recorded history (~2,000 fatalities). With the sobering lessons of El Chichón still fresh, scientists and governmental officials had a higher awareness of possible disastrous outcome when Tacaná Volcano began to exhibit unrest in late 1985. Seismic and geochemical studies were quickly initiated to monitor activity. At the same time, scientists worked actively with officials of the Federal and local agencies to develop the “Plan Operativo” (Operational Plan)—expressly designed to effectively communicate hazards information and reduce confusion and panic among the affected population. Even though the volcano-monitoring data obtained during the Tacaná crisis were limited, when used in conjunction with protocols of the Operational Plan, they proved useful in mitigating risk and easing public anxiety. While comprehensive monitoring is not yet available, both El Chichón and Tacaná volcanoes are currently monitored—seismically and geochemically—within the scientific and economic resources available. Numerous post-eruption studies have generated new insights into the volcanic systems that have been factored into subsequent volcano monitoring and hazards assessments. The State of Chiapas is now much better positioned to deal with any future unrest or eruptive activity at El Chichón or Tacaná, both of which at the moment are quiescent as of 2014. Perhaps more importantly, the protocols first tested in 1986 at Tacaná have served as the basis for the development of risk-management practices for hazards from other active and potentially active volcanoes in Mexico. These practices have been most notably employed since 1994 at Volcán Popocatépetl since a major eruption under unfavorable prevailing winds may constitute a substantial threat to densely populated metropolitan Mexico City. While the 1982 El Chichón disaster was a national tragedy, it greatly accelerated volcanic emergency preparedness and multidisciplinary scientific studies of eruptive processes and products, not only at El Chichón but also at other explosive volcanoes in Mexico and elsewhere in the world.

Chiapas↗
USGS2014

Tsunamis: stochastic models of occurrence and generation mechanisms

The devastating consequences of the 2004 Indian Ocean and 2011 Japan tsunamis have led to increased research into many different aspects of the tsunami phenomenon. In this entry, we review research related to the observed complexity and uncertainty associated with tsunami generation, propagation, and occurrence described and analyzed using a variety of stochastic methods. In each case, seismogenic tsunamis are primarily considered. Stochastic models are developed from the physical theories that govern tsunami evolution combined with empirical models fitted to seismic and tsunami observations, as well as tsunami catalogs. These stochastic methods are key to providing probabilistic forecasts and hazard assessments for tsunamis. The stochastic methods described here are similar to those described for earthquakes (Vere-Jones 2013) and volcanoes (Bebbington 2013 ) in this encyclopedia.

Book chapter↗
USGS2019

Tsunamis: Stochastic models of generation, propagation, and occurrence

The devastating consequences of the 2004 Indian Ocean and 2011 Tohoku-oki tsunamis have led to increased research into many different aspects of the tsunami phenomenon. In this paper, we review research related to the observed complexity and uncertainty associated with tsunami generation, propagation, and occurrence described and analyzed using a variety of stochastic models. In each case, tsunamis generated by earthquakes are primarily considered. Stochastic models are developed from the physical theories that govern tsunami evolution combined with empirical models fitted to seismic and tsunami observations, as well as tsunami catalogs. These stochastic models are key to providing probabilistic forecasts and hazard assessments for tsunamis. The stochastic methods described here are similar to those described for earthquakes (Vere-Jones, 2013) and volcanoes (Bebbington, 2013) in this Encyclopedia.

Book chapter↗
USGS2019

Volcano deformation: Insights into magmatic systems

Volcano geodesy is the branch of geodetic science that deals with the changing shapes of volcanoes, whether large or small, deep-seated or surficial. Together with seismicity and volcanic gas flux, deformation of the ground surface can be a key indicator of subsurface conditions and processes at volcanoes—information that not only improves scientific understanding of magmatic systems but also is useful for assessing volcano hazards and mitigating their potential consequences. To take full advantage of such information requires detailed characterization of the deformation field in space and time. Currently, no single geodetic technique is capable of providing both the high spatial and temporal resolution required. However, important advances have been made recently by combining information from real-time in situ sensors such as continuous GPS, strainmeters, and tiltmeters with repeated campaign-style GPS, microgravity, interferometric synthetic aperture radar (InSAR), lidar, and photogrammetric observations. Continuous real-time data constrain the timing but not necessarily the spatial extent and pattern of deformation, whereas InSAR provides detailed spatial information but only at intervals of several days to weeks. Repeated microgravity surveys, when combined with independent measurements of surface height, are uniquely sensitive to changes in subsurface mass distribution and therefore can be used to distinguish among processes driven by magma, hydrous fluids, or gas. Simultaneous analysis of multiple geodetic datasets, especially when guided by information from global volcano databases and numerical simulations of volcanic processes and products, can provide a statistical basis for outcome prediction and serve as a guide for additional observations. In the foreseeable future, interactions among magmatic, tectonic, and hydrothermal systems will be monitored and modeled at regional scale in real time, enabling new insights into Earth’s subsurface environment.

Book chapter↗
USGS2013

Limiting the immediate and subsequent hazards associated with wildfires

Wildfire is a unique natural hazard because it poses immediate threats to life and property as well as creating conditions that can lead to subsequent debris flows. In recent years, the immediate destructive force of wildfires has been decreased through better understanding of fire behavior. Lightning detection networks now identify the number and locations of this common ignition source. Measurements of wind speed, temperature, slope, fuel types and fire boundaries are routinely incorporated into models for fire spread, permitting real-time adjustments to fire-fighting strategies, thus increasing fire-fighting effectiveness. Similarly, our capability to limit impacts from post-fire debris flows is improving. Empirical models for estimating the probability of debris-flow occurrence, the volume of such an event, and mapping the inundated area, linked with improved definitions of the rainfall conditions that trigger debris flows, can be used to provide critical information for post-fire hazard mitigation and emergency-response planning.

Book chapter↗
USGS2015

A review of the recent geochemical evolution of Piton de la Fournaise volcano (1927-2010)

Between 1927 and 2010, more than one hundred eruptions of Piton de la Fournaise produced ~1 km 3 of lava, and the volcano’s summit collapsed twice (in 1931 and 2007). These lavas display, respectively, 20 and 65 % of the Sr–Nd and the Pb isotope ranges reported for La Réunion volcanoes over their known eruptive record (3.8 Ma). Variations in major and trace element concentrations and Sr–Pb isotopes do not define a temporal trend at the scale of the century, but display systematic short-term cyclic fluctuations. The positive correlation between 87 Sr/ 86 Sr and ratios of trace elements that are more versus less incompatible during partial melting of the mantle (e.g., Nd/Sm, La/Sm) probably results from the sampling of small-scale heterogeneities within the plume source. Changes in the degree of melting and/or crystallization are debated, but these appear ultimately linked to source properties. Lead isotopes do not co-vary with Sr isotopes, in part because of the partitioning of Pb into dense metallic phases that are preferentially sampled during high-flux eruptions. Taken together, Sr–Nd–Pb–Os–Th isotopes do not support contamination of magma with genetically unrelated components, such as the underlying Indian oceanic crust, mantle lithosphere, seawater, or seawater-altered lavas. Yet, in some rare cases (e.g. the 1998 Hudson eruption), the compositional patterns suggest that the parental magma assimilated older volcanic products within the edifice, such as crystal cumulates and/or interstitial differentiated melts. The geochemical fluctuations over the 1927–2010 time period constrain the residence time of magma in the shallow reservoir to 10–30 years and its size to 0.1–0.3 km 3 . The magma residence time during the course of the long-lived 1998 eruption is estimated to be an order of magnitude shorter, but the reservoir was probably of similar size. Instead, the shorter magma residence for the 1998 eruption was probably due to a higher magma flux.

Book chapter↗
USGS2013

The effect of complex fault rupture on the distribution of landslides triggered by the 12 January 2010, Haiti earthquake

The M W 7.0, 12 January 2010, Haiti earthquake triggered more than 7,000 landslides in the mountainous terrain south of Port-au-Prince over an area that extends approximately 50 km to the east and west from the epicenter and to the southern coast. Most of the triggered landslides were rock and soil slides from 25°–65° slopes within heavily fractured limestone and deeply weathered basalt and basaltic breccia. Landslide volumes ranged from tens of cubic meters to several thousand cubic meters. Rock slides in limestone typically were 2–5 m thick; slides within soils and weathered basalt typically were less than 1 m thick. Twenty to thirty larger landslides having volumes greater than 10,000 m 3 were triggered by the earthquake; these included block slides and rotational slumps in limestone bedrock. Only a few landslides larger than 5,000 m 3 occurred in the weathered basalt. The distribution of landslides is asymmetric with respect to the fault source and epicenter. Relatively few landslides were triggered north of the fault source on the hanging wall. The densest landslide concentrations lie south of the fault source and the Enriquillo-Plantain-Garden fault zone on the footwall. Numerous landslides also occurred along the south coast west of Jacmél. This asymmetric distribution of landsliding with respect to the fault source is unusual given the modeled displacement of the fault source as mainly thrust motion to the south on a plane dipping to the north at approximately 55°; landslide concentrations in other documented thrust earthquakes generally have been greatest on the hanging wall. This apparent inconsistency of the landslide distribution with respect to the fault model remains poorly understood given the lack of any strong-motion instruments within Haiti during the earthquake.

Book chapter↗
USGS2013

Environmental impact of the landslides caused by the 12 May 2008, Wenchuan, China earthquake

The magnitude 7.9 (M w ) Wenchuan, China, earthquake of May 12, 2008 caused at least 88,000 deaths of which one third are estimated to be due to the more than 56,000 earthquake-induced landslides. The affected area is mountainous, featuring densely-vegetated, steep slopes through which narrowly confined rivers and streams flow. Numerous types of landslides occurred in the area, including rock avalanches, rock falls, translational and rotational slides, lateral spreads and debris flows. Some landslides mobilized hundreds of million cubic meters of material, often resulting in the damming of rivers and streams, impacting river ecosystems and morphology. Through an extensive search of both Chinese- and English-language publications we provide a summary of pertinent research on environmental effects, emphasizing key findings. Environmental effects caused by landslides include the alteration of agriculture, changes to natural ecosystems, changes in river morphology due to landslide dams and other effects such as sedimentation and flooding. Damage by landslides to the giant panda reserve infrastructure and habitat, was severe, threatening the survival of one of the world’s rarest species. The Panda reserves are of national significance to China, and to the vital tourism economy of the region. One of the major impacts to both the natural and built environment is the complete relocation of some human populations and infrastructure to new areas, resulting in the abandonment of towns and other areas that were damaged by the earthquake and landslides. The landslide effects have affected the biodiversity of the affected area, and it has been hypothesized that strict forest preservation measures taken in the years preceding the earthquake resulted in a reduction of the environmental damage to the area.

Wenchuan↗
USGS2013

Spatial Relation Predicates in Topographic Feature Semantics

Topographic data are designed and widely used for base maps of diverse applications, yet the power of these information sources largely relies on the interpretive skills of map readers and relational database expert users once the data are in map or geographic information system (GIS) form. Advances in geospatial semantic technology offer data model alternatives for explicating concepts and articulating complex data queries and statements. To understand and enrich the vocabulary of topographic feature properties for semantic technology, English language spatial relation predicates were analyzed in three standard topographic feature glossaries. The analytical approach drew from disciplinary concepts in geography, linguistics, and information science. Five major classes of spatial relation predicates were identified from the analysis; representations for most of these are not widely available. The classes are: part-whole (which are commonly modeled throughout semantic and linked-data networks), geometric, processes, human intention, and spatial prepositions. These are commonly found in the ‘real world’ and support the environmental science basis for digital topographical mapping. The spatial relation concepts are based on sets of relation terms presented in this chapter, though these lists are not prescriptive or exhaustive. The results of this study make explicit the concepts forming a broad set of spatial relation expressions, which in turn form the basis for expanding the range of possible queries for topographical data analysis and mapping.

Book chapter↗