Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Names”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85Linked to original sources

Preliminary geologic map of the San Guillermo Mountain Quadrangle, Ventura County, California

New 1:24,000-scale geologic mapping in the Cuyama 30' x 60' quadrangle, in support of the USGS Southern California Areal Mapping Project (SCAMP), is contributing to a more complete understanding of the stratigraphy, structure, and tectonic evolution of the complex junction area between the NW-striking Coast Ranges and EW-striking western Transverse Ranges. The 1:24,000-scale geologic map of the San Guillermo Mountain quadrangle is one of six contiguous 7 1/2' quadrangle geologic maps in the eastern part of the Cuyama map area being compiled for a more detailed portrayal and reevaluation of geologic structures and rock units shown on previous geologic maps of the area (e.g., Dibblee, 1979). The following observations and interpretations are based on the new San Guillermo Mountain geologic compilation: (1) The new geologic mapping in the northern part of the San Guillermo Mountain quadrangle allows for reinterpretation of fault architecture that bears on potential seismic hazards of the region. Previous mapping had depicted the eastern Big Pine fault (BPF) as a northeast-striking, sinistral strike-slip fault that extends for 30 km northeast of the Cuyama River to its intersection with the San Andreas fault (SAF). In contrast the new mapping indicates that the eastern BPF is a thrust fault that curves from a northeast strike to an east strike, where it is continuous with the San Guillermo thrust fault, and dies out further east about 15 km south of the SAF. This redefined segment of the BPF is a south-dipping, north-directed thrust, with dominantly dip slip components (rakes > 60 deg.), that places Middle Eocene marine rocks (Juncal and Matilija Formations) over Miocene through Pliocene(?) nonmarine rocks (Caliente, Quatal, and Morales Formations). Although a broad northeast-striking fault zone, exhibiting predominantly sinistral components of slip (rakes < 45 deg.), extends to the SAF as previously mapped, the fault zone does not connect to the southwest with the BPF but instead curves into a southwest-directed thrust fault system a short distance north of the BPF. Oligocene to Pliocene(?) nonmarine sedimentary and volcanic rocks of the Plush Ranch, Caliente, and Morales(?) Formations are folded on both sides of this fault zone (informally named the Lockwood Valley fault zone [LVFZ] on the map). South-southeast of the LVFZ overturned folds have southward vergence. Several moderate-displacement (< 50 m), mainly northwest-dipping thrust and reverse faults, exhibiting mostly sinistral-oblique slip, flank and strike parallel to the overturned folds. The fold vergence and thrust direction associated with the LVFZ is opposite to that of the redefined BPF, providing further evidence that the two faults are distinct structures. These revised fault interpretations bring into question earlier estimates of net sinistral strike-slip displacement of as much as 13 km along the originally defined eastern BPF, which assumed structural connection with the LVFZ. Also, despite sparse evidence for repeated Quaternary movement on the LVFZ (e.g., Dibblee, 1982), the potential for a large earthquake involving coseismic slip on both the LVFZ and the central BPF to the southwest may not be as great as once believed. (2) Several generations of Pleistocene and younger dissected alluvial terrace and fan deposits sit at various levels above modern stream channels throughout the quadrangle. These deposits give testimony to the recent uplift and related fault deformation that has occurred in the area. (3) A vast terrane of Eocene marine sedimentary rocks (Juncal and Matilija Formations and Cozy Dell Shale) exposed south of the Big Pine fault forms the southern two-thirds of the San Guillermo Mountain quadrangle. Benthic foraminifers collected from various shale intervals within the Juncal Formation indicate a Middle Eocene age (Ulatisian) for the entire formation (K. McDougall, unpub. data, 1998) and deposition at paleodepths as great as 2,000 m (i.e., lowe

California↗

Plutons and accretionary episodes of the Klamath Mountains, California and Oregon

The Klamath Mountains consist of various accreted terranes and include many plutons that range in composition from gabbro to granodiorite. Some of the plutons (preaccretionary plutons) were parts of terranes before the terranes accreted; others (accretionary plutons) intruded during or after the accretion of their host terrane(s). This report attempts to (1) graphically illustrate how the Klamath Mountains grew by the accretion of allochthonous oceanic terranes during early Paleozoic to Cretaceous times, (2) identify the plutons as either preaccretionary or accretionary, and (3) genetically relate the plutonic intrusions to specific accretionary episodes. The eight accretionary episodes portrayed in this report are similar to those shown by Irwin and Mankinen (1998) who briefly described the basis for the timing of the episodes and who illustrated the ~110 degrees of clockwise rotation of the Klamath Mountains since Early Devonian time. Each episode is named for the accreting terrane. In all episodes (Figs. 1-8), the heavy black line represents a fault that separates the accreting oceanic rocks on the left from earlier accreted terranes on the right. The preaccretionary plutons are shown within the accreting oceanic crustal rocks to the left of the heavy black line, and the accretionary plutons in most instances are shown intruding previously accreted terranes to the right. Episodes earlier than the Central Metamorphic episode (Fig. 1), and that may have been important in the formation of the early Paleozoic nucleous of the province (the Eastern Klamath terrane), are not known. The 'Present Time' distribution of the accreted terranes and plutons is shown at a large scale in Figure 9. The schematic vertical section (Fig. 10) depicts the terranes as a stack of horizontal slabs that include or are intruded by vertical plutons. Note that at their base the ~170 Ma preaccretionary plutons of the Western Hayfork subterrane are truncated by the ~164 Ma Salt Creek accretionary fault, the ~160 Ma accretionary plutons are truncated by the ~150 Ma Bear Wallow accretionary fault, and the ~150 Ma accretionary plutons (and questionably the Grants Pass ~139 Ma accretionary pluton) are truncated by the ~120 Ma South Fork fault.

California, Oregon↗

Inversion of gravity data to define the pre-Tertiary surface and regional structures possibly influencing ground-water flow in the Pahute Mesa-Oasis Valley region, Nye County, Nevada

A three-dimensional inversion of gravity data from the Pahute Mesa–Oasis Valley region reveals a topographically complex pre-Tertiary basement surface. Beneath Pahute Mesa, the thickness of the Tertiary volcanic deposits may exceed 5 km within the Silent Canyon caldera complex. South of Pahute Mesa in Oasis Valley, basement is shallower (< 1 km) but between this valley and the Timber Mountain caldera complex is a basin that probably represents, in part, a moat related to the Timber Mountain caldera complex. Of particular interest is a NE-trending lineament, named here the Thirsty Canyon lineament (TCL), separating terranes at significantly different elevations. Southeast of the TCL, a highly undulating basement surface descends deeply into several calderas, whereas NW of the TCL basement is relatively flat and shallow. Because as many as four calderas seem to abruptly terminate at the TCL, the TCL may reflect a major buried fault zone, which influenced caldera growth. This inferred Thirsty Canyon fault zone and several EW basement ridges in the derived 3-dimensional basin thickness model may influence the flow of ground water from the Pahute Mesa region to Oasis Valley.

Nevada↗

The Red Sea Basin Province: Sudr-Nubia(!) and Maqna(!) Petroleum Systems

The Sudr-Nubia(!) oil-prone total petroleum system dominates the densely explored Gulf of Suez part of the rifted Red Sea Basin Province. Upper Cretaceous to Eocene source rocks, primarily the Senonian Sudr Formation, are organic-rich, areally uniform marine carbonates that have generated known ultimate recoverable reserves exceeding 11 BBOE. The name Nubia is used for sandstone reservoirs with a wide range of poorly constrained, pre-rift geologic ages ranging from Early Paleozoic to Early Cretaceous. Syn- and post-rift Tertiary reservoirs, especially the Kareem Formation, also contain significant reserves. Partly overlapping Sudr-Nubia(!) is the areally larger and geochemically distinct, oil-and-gas-prone Maqna(!) total petroleum system within the southern Gulf of Suez basin and the sparsely explored remaining Red Sea basin. Known ultimate recoverable reserves are 50-100 MMBOE and more than 900 MMBOE, respectively, in those areas. Both the source and reservoir rocks in this petroleum system are Tertiary, dominantly Miocene, in age. Maqna(!) has the greater potential for future resource development.

Open-File Report↗

Ghaba salt basin province and Fahud salt basin province, Oman; geological overview and total petroleum systems

Three Total Petroleum Systems each consisting of one assessment unit have been identified in the Ghaba and Fahud Salt Basin Provinces of north-central Oman. One Total Petroleum System and corresponding assessment unit, the North Oman Huqf/`Q'? Haushi(!) Total Petroleum System (201401) and Ghaba-Makarem Combined Structural Assessment Unit (20140101), were identified for the Ghaba Salt Basin Province (2014). In the Fahud Salt Basin Province, however, two overlapping Total Petroleum Systems (TPS) were recognized: 1) the North Oman Huqf ? Shu'aiba(!) TPS (201601); Fahud-Huqf Combined Structural Assessment Unit (20160101), and 2) the Middle Cretaceous Natih(!) TPS (201602); Natih-Fiqa Structural/Stratigraphic Assessment Unit (20160201). The boundary for each Total Petroleum System also defines the boundary of the corresponding assessment unit and includes all trap styles and hydrocarbon producing reservoirs within the petroleum system. In both the Ghaba and Fahud Salt Basin Provinces, hydrocarbons were generated from several deeply-buried source rocks within the Infracambrian Huqf Supergroup. One general `North Oman Huqf' type oil is dominant in the Fahud Salt Basin. Oils in the Ghaba Salt Basin are linked to at least two distinct Huqf source-rock units based on oil geochemistry: a general North Oman Huqf-type oil source and a more dominant `questionable unidentified-source' or `Q'-type Huqf oil source. These two Huqf-sourced oils are commonly found as admixtures in reservoirs throughout north-central Oman. Hydrocarbons generated from Huqf sources are produced from a variety of reservoir types and ages ranging from Precambrian to Cretaceous in both the Ghaba and Fahud Salt Basin Provinces. Clastic reservoirs of the Gharif and Al Khlata Formations, Haushi Group (M. Carboniferous to L. Permian), dominate oil production in the Ghaba Salt Basin Province and form the basis for the Huqf/`Q' ? Haushi(!) TPS. In contrast, the Lower Cretaceous Shu'aiba and Middle Cretaceous Natih limestones account for most of the production in the Fahud Salt Basin with about 50 percent of the basin's production from porous, fractured Shu'aiba limestones in Yibal field, thus the name North Oman Huqf ? Shu'aiba(!) TPS. Deep gas is produced mainly from Middle Cambrian to Lower Ordovician clastic reservoirs of the Haima Supergroup. Traps in nearly all hydrocarbon accumulations of these petroleum systems are mainly structural and were formed by one or more mechanisms. These trap-forming mechanisms were mainly periodic halokinesis of the thick Cambrian Ara Salt and consequent folding and faulting from basin loading, rifting, or other major tectonic events, particularly those events forming the Oman Mountains and associated foreland-basin system during the Late Cretaceous and Late Tertiary. Many of the future new-field targets will likely be low-relief, subtle structures, as many of the large structures have been drilled. Oman's recent interest and commitments to liquid natural gas export make deep gas a primary objective in the two North Oman Huqf petroleum systems. New-field exploration of deep gas and exploring deeper targets for gas in existing fields will likely identify a significant gas resource in the next thirty years. Moreover, salt-diapir flank traps in these two North Oman Huqf petroleum systems and salt basin provinces have gone essentially untested and will likely be targeted in the near-future. The Middle Cretaceous Natih(!) TPS is a small efficient system of the Fahud Salt Basin. Natih source rocks are only mature in the Late Cretaceous/Tertiary foredeep and production is primarily from Natih reservoirs; minor production from the Shu'aiba limestone is documented along fault-dip structures. Most traps are structural and are related to development of the foreland basin and formation of the Oman Mountains. Future targets of the Natih TPS will be less obvious than those of Fahud and Natih fields and likely includ

Open-File Report↗

Computer Program for Point Location And Calculation of ERror (PLACER)

A program designed for point location and calculation of error (PLACER) was developed as part of the Quality Assurance Program of the Federal Highway Administration/U.S. Geological Survey (USGS) National Data and Methodology Synthesis (NDAMS) review process. The program provides a standard method to derive study-site locations from site maps in highwayrunoff, urban-runoff, and other research reports. This report provides a guide for using PLACER, documents methods used to estimate study-site locations, documents the NDAMS Study-Site Locator Form, and documents the FORTRAN code used to implement the method. PLACER is a simple program that calculates the latitude and longitude coordinates of one or more study sites plotted on a published map and estimates the uncertainty of these calculated coordinates. PLACER calculates the latitude and longitude of each study site by interpolating between the coordinates of known features and the locations of study sites using any consistent, linear, user-defined coordinate system. This program will read data entered from the computer keyboard and(or) from a formatted text file, and will write the results to the computer screen and to a text file. PLACER is readily transferable to different computers and operating systems with few (if any) modifications because it is written in standard FORTRAN. PLACER can be used to calculate study site locations in latitude and longitude, using known map coordinates or features that are identifiable in geographic information data bases such as USGS Geographic Names Information System, which is available on the World Wide Web.

Open-File Report↗

Proceedings of the first annual William Pecora Memorial Symposium, October 1975, Sioux Falls, South Dakota

The U.S. Geological Survey agreed to publish the proceeding of the first annual William T. Pecora Memorial Symposium in its Professional Paper series because the subject material is related to the mission of the Survey. The usual standards for this series have been modified to accommodate the variety of styles used by the participants in this symposium. All color illustrations are placed at the front of the book for economy in printing. They are identified by the names of the authors of the papers from which they are extracted.

Professional Paper↗

Subsurface stratigraphy and geochemistry of late Quaternary evaporites, Searles Lake, California, with a section on radiocarbon ages of stratigraphic units

Searles Lake is a dry salt pan, about 100 km 2 in area, that lies on the floor of Searles Valley, in the desert of southeast California. Several salt bodies of late Quaternary age lie beneath the surface, mostly composed of sodium and potassium carbonate, sulfate, chloride, and borate minerals. Mud layers separate the salt bodies, which contain interstitial brine that is the source of large quantities of industrial chemicals. The value of annual production from the deposit exceeds $30 million; total production to date exceeds $1 billion. The salts and muds were deposited during Pleistocene and Holocene times by a series of large lakes (200 m maximum depth, 1,000 km 2 maximum area) that fluctuated in size in response to climatic change. Salts were deposited during major dry (interpluvial) episodes, muds during wet (pluvial) episodes that correlate with glacial advances in other parts of North America and the world. Data based on cores from the deposit are used in this paper to establish the stratigraphy of the deposit, the chemical and mineral compositions of successive units, and the total quantities of components contained by them. These parameters are then used to determine the geochemical evolution of the sedimentary layers. The results provide a refined basis for reconstructing the limnology of Searles Lake and the regional climate during late Quaternary time. Six main stratigraphic units were distinguished and informally named earlier on the basis of their dominant composition: Unit Typical thickness 14C age, uncorrected (in meters) (years B.P.) Overburden Mud 7 0 to >3,500 Upper Salt 15 >3,500 to 10,500 Parting Mud 4 10,500 to 24,000 Lower Salt 12 24,000 to 32,500 Bottom Mud 30 32,500 to 130,000 Mixed Layer 200+ > 130,000 (The age of 130,000 years for the Mixed Layer is based on extrapolated sedimentation rates.) The Lower Salt is subdivided into seven salt units (S-l to S-7) and six mud units (M-2 to M-7), the Mixed Layer into six units (A to F). For each salt unit, the areal extent, volume, shape, mineralogy, and chemical composition of the solids and brines have been determined; for each mud unit (which originally extended over much of the basin), the shape and volume within a standard area, and the mineralogy, have been determined. The bulk compositions (brines plus salts) of the combined Lower Salt units S-l to S-5 and units S-6 and S-7, and the Upper Salt, were determined so that the total quantities and ratios of ions in the initial brines could be reconstructed. The 74 published HC dates on Searles Lake core samples from all but the oldest unit are supplemented by 14 new dates (determined by Minze Stuiver) on the Lower Salt. Most of the age control comes from dates based on disseminated organic carbon; two dates are on wood; dates on carbonate minerals are less reliable. Although the probable disequilibrium between the carbon in the lake and atmosphere (because of contamination, slow equilibrium rates, and other factors) causes disseminated carbon dates to be an estimated 500-2,500 years 'too old,' the ages of the major and minor units are relatively well established. The list above indicates rounded and uncorrected ages for the contacts of major units. The age of the only salt bed in the Lower Salt which indicates desiccation (S-5) is about 28,000 years. The average uncorrected sedimentation rate in the Parting Mud is 4

Professional Paper↗

Stratigraphy of the Hanna Basin, Wyoming

Carbon County, Wyo., has attracted the attention of geologists since the days of the territorial surveys under King, Hayden, and Powell. During this earlier work all the rocks (except the North Park formation) over-lying the uppermost beds of marine origin were grouped in a single formation, for which the name Laramie was proposed.

Wyoming↗

Chemical composition of sedimentary rocks in California and Hawaii

A compilation of published chemical analyses of sedimentary rocks of the United States was undertaken by the U.S. Geological Survey in 1952 to make available scattered data that are needed for a wide range of economic and scientific uses. About 20,000-25,000 chemical analyses of sedimentary rocks in the United States have been published. This report brings together 2,312 of these analyses from California and Hawaii. The samples are arranged by general lithologic characteristics and locality. Indexes of stratigraphy, rock name, commercial uses, and minor elements are provided. The sedimentary rocks are classified into groups and into categories according to the chemical analyses. The groups (A through F2) are defined by a system similar to that proposed by Brian Mason in 1952, in which the main parameters are the three major components of sedimentary rocks: (1) uncombined silica, (2) clay (R203 ? 3Si02 ? nH20), and (3) calcium-magnesium carbonate. The categories are based on the degree of admixture of these three major components with other components, such as sulfate, phos- phate, and iron oxide. Common-rock, mixed-rock, and special-rock categories apply to rocks consisting of 85 percent or more, 50-84 percent, and less than 49 percent, respectively, of the three major components combined. Maps show distribution of sample localities by States; triangular diagrams show the lithologic characteristics and classification groups. Cumulative-frequency curves of each constituent in each classification group of the common-rock and mixed-rock categories are also included. The numerous analyses may not adequately represent the geochemical nature of the rock types and formations of the region because of sampling bias. Maps showing distribution of sample localities indicate that many of the localities are in areas where, for economic or other reasons, special problems attracted interest. Most of the analyzed rocks tended to be fairly simple in composition - mainly mixtures of just two of the three major components or a mixture of these and a fourth component such as phosphate, gypsum, or iron oxide.

Professional Paper↗

The Boulder Creek Batholith, Front Range, Colorado

The Boulder Creek batholith is the best known of several large Precambrian batholiths of similar rock composition that crop out across central Colorado. The rocks in the batholith belong to the calc-alkaline series and range in composition from granodiorite through quartz diorite (tonalite) to gneissic aplite. Two rock types dominate': the Boulder Creek Granodiorite, the major rock unit, and a more leucocratic and slightly younger unit herein named Twin Spruce Quartz Monzonite. Besides mafic inclusions, which occur mainly in hornblende-bearing phases of the Boulder Creek Granodiorite, there are cogenetic older and younger lenses, dikes, and small plutons of hornblende diorite, hornblendite, gabbro, and pyroxenite. Pyroxenite is not found in the batholith. The Boulder Creek Granodiorite in the batholith represents essentially two contemporaneous magmas, a northern body occurring in the Gold Hill and Boulder quadrangles and a larger southern body exposed in the Blackhawk and the greater parts of the Tungsten and Eldorado Springs quadrangles. The two bodies are chemically and mineralogically distinct. The northern body is richer in CaO and poorer in K2O, is more mafic, and has a larger percentage of plagioclase than the southern body. A crude sequence of rock types occurs from west to east in the batholith accompanied by a change in plagioclase composition from calcic plagioclase on the west to sodic on the east. Ore minerals tend to decrease, and the ratio potassium feldspar:plagioclase increases inward from the western contact of the batholith, indicating that the Boulder Creek batholith is similar to granodiorite batholiths the world over. Emplacement of the Boulder Creek batholith was contemporaneous with plastic deformation and high-grade regional metamorphism that folded the country rock and the batholith contact along west-northwest and north-northwest axes. Also, smaller satellitic granodiorite bodies tend to conform to the trends of foliation and fold axes in the country rock, suggesting that emplacement was controlled by preexisting structures in the country rock. On a gross scale, chemical equilibrium in the Boulder Creek Granodiorite is expressed by a near 1:1 ratio, or straight-line relationship in the distribution of iron, magnesium, and manganese in biotite and hornblende. General mineralogical trends in the Boulder Creek Granodiorite indicate that modal biotite, hornblende, and plagioclase tend to increase and quartz and microcline tend to decrease as CaO increases. These trends were not found in the Twin Spruce Quartz Monzonite. Differentiation is believed to have played a major role and assimilation a minor role in the development of the Boulder Creek batholith. The Boulder Creek Granodiorite is of probable mantle or lower crust origin, and, based on the scant data available, the Twin Spruce Quartz Monzonite may be of crustal origin, but the magma was extensively altered by contaminants of ambiguous origin. Mafic inclusions, possibly derived from a dioritic magma which was an early differentiate associated temporally with the Boulder Creek Granodiorite and (or) the Twin Spruce Quartz Monzonite, were in jected into the Boulder Creek Granodiorite during the mush stage and before the batholith was completely crystallized. Biotite, hornblende, and potassium feldspar were studied extensively. Their chemistry and petrology indicate a homogeneity throughout the batholith not believed possible by a casual observance of the batholithic rocks in the field. The accessory minerals, where investigated, also tend to indicate this same pervasive homogeneity.

Professional Paper↗

Shorter contributions to stratigraphy and structural geology, 1979

PART A: A system of anticlines lies along the trend of the sinuous course of the Colorado River for a distance of 97 km in the central Grand Canyon. Similar anticlines occur in some perennially wet side canyons. The anticlines are most abundant and well developed along northeast-trending reaches of the main canyon where it is floored by the Cambrian Muav Limestone. Dips of the folded strata are as great as 60?, and the folding locally extends more than 250 m from the river. Low-angle thrust faults in the limbs of the anticlines parallel the river and have formed in response to folding of the comparatively brittle carbonate strata. High-angle reverse kink bands, along which rocks are displaced up toward the river, also parallel the anticlines and have develop2d in response to the upward bulging of the canyon floor. The river anticlines are an unloading phenomenon. They result from lateral squeezing toward the river of saturated shaly parts of the Muav Limestone and underlying Bright Angel Shale. The driving mechanism for the deformation is a stress gradient that results from a difference in lithostatic load between the heavily loaded rocks under the 650-m-high canyon walls and the unloaded canyon floor. Saturation appears to weaken the shaly rocks sufficiently to allow deformation to take place. River anticlines are not present in the eastern Grand Canyon, where the Cambrian rocks also occur at river level. Their absence is explained by a lack of shaly rocks that could flow when saturated. PART B: The current interest in contemporary tectonic processes in the Eastern United States is turning up abundant evidence of crustal movements in late geologic time. Topographic analysis of the highland areas from the southern Blue Ridge to the Adirondack Mountains indicates that most of the landforms owe their origin to erosion of rocks of different resistance rather than to tectonic processes. Most areas of high relief and high altitude have been formed on resistant rocks. The Cambrian and Ordovician belt, containing mostly shale and carbonate rock, on the other hand, forms an extensive lowland from Alabama to the Canadian border and girdles the Adirondack Mountains. Differences in altitude can be explained by the presence of resistant rocks outside the belt; these resistant rocks form local base levels on the streams that drain the belt. A few areas may have undergone local uplift at a higher rate than areas nearby--for example, the Piedmont region northwest of Chesapeake Bay. Most estimates of erosion rates, based on the load transported by streams and of uplift rates, based on removal during a known period of time, are of the same order of magnitude, averaging almost 4x 10^-2 millimeters per year. Rates of uplift, based on study of tilted Pleistocene beaches and repeated geodetic traverses, are at least an order of magnitude higher for comparable areas. Tectonic uplift of the highlands has been slow and involves mostly warping or tilting on a large scale. Erosion rates keep up with or exceed the rate of uplift and have been sufficient to mask evidence of faulting or other differential movements. The high rates of uplift that are inferred on tilted water planes in the glaciated regions or that are measured by differences in repeated geodetic traverses cannot have been sustained for long periods of time. PART C: The Hanson Creek Formation southwest of Eureka, Nev., in the Bellevue Peak Quadrangle is composed of three lithostratigraphic members: (1) a basal dark-gray dolomite, (2) a middle silty thin- to thick-bedded, locally nodular, dark-gray, light-yellow-mottled limestone topped by light-gray dolomite, and (3) an upper dark-gray dolomite, which is herein named the Combs Canyon Dolomite Member. Detailed geologic mapping and accompanying fossil collecting prove that the same lithostratigraphic and biostratigraphic sequence is present in the Mountain Boy Range and 11 km to the south near Wood Cone Peak. Minor differences in

Professional Paper↗

Revised nomenclature and stratigraphic relationships of the Fredericksburg Complex and Quantico Formation of the Virginia Piedmont

The Fredericksburg Complex, in part a migmatitic terrane in northeast Virginia, is subdivided on the basis of lithology, as well as aeromagnetic and aeroradiometric data, into two metamorphic suites. These suites are separated by the northeast-trending Spotsylvania lineament, a rectilinear geophysical feature that is probably the trace of an old fault zone. East of the lineament, the Po River Metamorphic Suite, of Proterozoic Z and (or) early Paleozoic age, consists dominantly of biotite gneiss, generally augen gneiss, and lesser amounts of hornblende gneiss and mica schist. West of the Spotsylvania lineament is the Ta River Metamorphic Suite, composed mostly of amphibolite and amphibole gneiss. However, to the southwest, along its strike belt, the Ta River contains abundant biotite gneiss and mica schist. Both the Ta River and Po River contain abundant foliated granitoid and pegmatoid bodies as concordant tabular masses and as crosscutting dikes; these rocks are considered part of the Ta River and Po River Metamorphic Suites. The amphibolitic Holly Corner Gneiss is interpreted to be a western allochthonous equivalent of the Ta River. Both the Ta River and Holly Corner are considered to be coeval, eastern, distal facies of the Lower Cambrian(?) Chopawamsic Formation. The Paleozoic Falls Run Granite Gneiss intrudes the Ta River Metamorphic Suite and the Holly Corner Gneiss; locally the Falls Run is interpreted to have been transported westward with the Holly Corner after intrusion. The Quantico Formation, in the core of the Quantico-Columbia synclinorium, rests with angular unconformity along its northwest and southeast limbs, respectively, on the Chopawamsic Formation and the Ta River Metamorphic Suite. The Quantico Formation is assigned the same Late Ordovician age and similar stratigraphic position as the Arvonia Slate of the Arvonia syncline. The youngest rocks of the area are the granitoid and pegmatoid bodies of the Falmouth Intrusive Suite. They consist of several generations of chiefly dikes and sills that are intrusive into the Fredericksburg Complex and into the Quantico Formation. Granitoid rocks also form small plutons. The Falmouth is isotopically dated as Carboniferous in age. Some of the metavolcanic rocks of the Evington Group and part of the amphibolite gneiss and amphibolite of the Hatcher Complex, named by W. B. Brown in 1969, are probably coeval with the Chopawamsic Formation and hence equivalents of the Ta River Metamorphic Suite and the Holly Corner Gneiss. The biotitic gneiss and granitoid rocks east of the Spotsylvania lineament in the Dillwyn area are considered to be coeval with the Po River Metamorphic Suite.

Virginia↗

Stratigraphy of the Silurian outcrop belt on the east side of the Cincinnati Arch in Kentucky, with revisions in the nomenclature

Silurian rocks form a narrow arcuate outcrop belt about 100 mi long on the east side of the Cincinnati Arch in Kentucky. They range from as much as 300 ft thick in the north to a pinchout edge in the south. The nomenclature of this sequence is revised to reflect mappability and lithologic uniformity on the basis of detailed mapping at a scale of 1:24,000 by the U.S. Geological Survey in cooperation with the Kentucky Geological Survey. The Silurian rocks are divided into two parts: the Crab Orchard Group, raised in rank from Crab Orchard Formation and redefined, in the lower part of the Silurian section, and Bisher Dolomite in the upper part of the section. The Crab Orchard Group is subdivided into the Drowning Creek Formation (new name) at the base of the Silurian, overlain by the Alger Shale (adopted herein) south of Fleming County and by the Estill Shale (elevated to formational rank) north of Bath County. The Brassfield Member (reduced in rank from Brassfield Dolomite or Formation) and the Plum Creek Shale and Oldham Members of the former Crab Orchard Formation are included as members of the Drowning Creek; the Lulbegrud Shale, Waco, and Estill Shale Members of the former Crab Orchard Formation are now included in the Alger. The Drowning Creek Formation, 20 to 50 ft thick, is composed mainly of gray fine to coarse-grained dolomite with shale interbeds. The dolomite beds average several inches thick, with bedding surfaces that are locally smooth but generally irregular and are fossiliferous in many places; fossils include brachiopods, crinoid columnals, horn corals, colonial corals, trilobites, pelecypods, and bryozoans. The shale interbeds average several inches thick, except for its Plum Creek Shale Member which is entirely shale and as much as 12 ft thick, and are most abundant in the upper half of the formation. The members of the Drowning Creek intergrade and are indistinguishable in the northern part of the area. The Alger Shale, as much as 170 feet thick, is predominantly grayish-green clay shale with a thin (0.5-3 ft) dolomite member (the Waco, or its northern equivalent, the Dayton Dolomite Member, reduced in rank from Dayton Limestone) near the base. North of Bath County, the Lulbegrud Shale and Dayton Dolomite Members are reassigned to the underlying Drowning Creek Formation, the Estill Shale Member is elevated to formational status, and the Alger is dropped. The Bisher Dolomite, which overlies the Estill Shale in the northernmost part of the Silurian belt, ranges from 0 to 300 ft in thickness and is composed of medium-to coarse-grained, gray, fossiliferous dolomite. The Silurian section overlies Upper Ordovician rocks in apparent conformity, although faunal studies suggest a minor hiatus, and is overlain by Middle to Upper Devonian rocks in a regional angular unconformity that truncates the entire Silurian section at the southwest end of the outcrop belt, where it is nearest the axis of the Cincinnati Arch. All of the units recognized in the Silurian appear to thicken eastward, away from the axis of the arch and towards the Appalachian basin. This, with the presence of isolated remnants of the Brassfield near the axis, suggest that formation of the arch was initiated in Early Silurian time by subsidence of its eastern flank.

Professional Paper↗

Makah Formation — A deep-marginal-basin sequence of late Eocene and Oligocene age in the northwestern Olympic Peninsula, Washington

The Makah Formation of the Twin River Group crops out in a northwest-trending linear belt in the northwesternmost part of the Olympic Peninsula, Wash. This marine sequence consists of 2800 meters of predominantly thin-bedded siltstone and sandstone that encloses six distinctive newly named members--four thick-bedded amalgamated turbidite sandstone members, an olistostromal shallow-water marine sandstone and conglomerate member, and a thin-bedded water-laid tuff member. A local unconformity of submarine origin occurs within the lower part of the Makah Formation except in the central part of the study area, where it forms the contact between the older Hoko River Formation and the Makah. Foraminiferal faunas indicate that the Makah Formation ranges in age from late Eocene (late Narizian) to late Oligocene (Zemorrian) and was deposited in a predominantly lower to middle bathyal environment. The Makah Formation is part of a deep-marginalbasin facies that crops out in the western part of the Olympic Peninsula, in southwesternmost Washington and coastal embayments in northwestern Oregon, and along the central part of the coast of western Vancouver Island. On the basis of limited subsurface data from exploratory wells, correlative deep-marginal-basin deposits underlie the inner continental shelf of Oregon and the continental shelf (Tofino basin) along the southwestern side of Vancouver Island. Directional structures in the Makah Formation indicate that the predominantly lithic arkosic sandstone that forms the turbidite packets was derived from the northwest. A possible source of the clastic material is the dioritic, granitic, and volcanic terranes in the vicinity of the Hesquiat Peninsula and Barkley Sound on the west coast of Vancouver Island. Vertical and lateral variations of turbidite facies suggest that the four packets of sandstone were formed as depositional lobes on an outer submarine fan. The thin-bedded strata between the turbidite packets have characteristics of basin-plain and outer-fan fringe deposits.

Washington↗

The geology and mechanics of formation of the Fort Rock Dome, Yavapai County, Arizona

The Fort Rock Dome, a craterlike structure in northern Arizona, is the erosional product of a circular domal uplift associated with a Precambrian shear zone exposed within the crater and with Tertiary volcanism. A section of Precambrian to Quaternary rocks is described, and two Tertiary units, the Crater Pasture Formation and the Fort Rock Creek Rhyodacite, are named. A mathematical model of the doming process is developed that is consistent with the history of the Fort Rock Dome.

Professional Paper↗

The fauna of the so-called Dakota formation of northern central Colorado and its equivalent in southeastern Wyoming

This paper describes a small fauna from beds in northern central Colorado that have long been designated the Dakota formation, often with doubt that all the beds so named were really equivalent to the typical Dakota sandstone of eastern Nebraska. The upper part of the equivalent beds in southeastern Wyoming was referred by some writers to the Benton Shale and the lower part of the Cloverly formation. This so-called Dakota formation of northern central Colorado and its equivalent in southeastern Wyoming consist of cherty conglomerate, brown quartzose sandstone, and dark shale. The conglomerate is usually at the base of the series and at many localities is overlain by a single shale unit and that in turn by a sandstone. At other localities, however, there are several alternations of sandstone and shale above the basal conglomeratic layer. The fossil described in this paper, except one specimen, were obtained from the shales of the middle part of the formation. The single specimen, an ammonite, came from the uppermost sandstone.

Colorado;Wyoming↗

Stratigraphy and characteristic mollusks of the Pamunkey Group (Lower Tertiary) and the Old Church Formation of the Chesapeake Group— Virginia coastal plain

Along the Pamunkey River and its tributaries can be found a very complete, well-preserved, Tertiary stratigraphic record that reflects the sea-level changes as well as the local tectonic history of the central Virginia Coastal Plain. Using this record, I have described the lower Tertiary units and proposed a sequential model for their occurrence. Sediments examined in this study range in age from early Paleocene to latest Oligocene or earliest Miocene. Upper Tertiary units are described where they occur in the same sections with the lower Tertiary beds. The Brightseat Formation (lower Paleocene), Aquia Formation (upper Paleocene), Marlboro Clay (upper Paleocene), Nanjemoy Formation (lower Eocene), Piney Point Formation (middle Eocene) and Old Church Formation (new unit, upper Oligocene and lower Miocene) were studied. The definitions of the Piscataway and Paspotansa Members of the Aquia are amended, and a lectostratotype (principal reference section) is designated for those units as well as the Aquia on the Potomac River just below the mouth of Aquia Creek. A lectostratotype section is also designated for the Nanjemoy and its two members, the Potapaco and the Woodstock. That section is on the Potomac above Popes Creek. Beds assigned to the Piney Point and Old Church Formations, previously known only in the subsurface, crop out extensively on the Pamunkey River. A hypostratotype (reference section) is selected for the Piney Point Formation on the Pamunkey River at Horseshoe. The Old Church Formation (named herein) is included in the Chesapeake Group. Areal extent of the stratigraphic units was determined by correlation of outcropping beds on the Pamunkey, Patuxent, Potomac, Rappahannock, Mattaponi, Chickahominy, and James Rivers supplemented by well data. Comparisons of the onlap histories of the Salisbury, Albemarle, and Charleston Embayments indicate a number of simultaneous transgressive events implying global sea-level rises. More restricted transgressions appear to be the result of local downwarping.

Virginia↗