SEARCH · Geology Reports

Results for “IEEE Transactions on Geoscience and Remote Sensing”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,666 records · Page 85Linked to original sources

USGS2026

Timescales of cumulate mobilization and mixing for the 1868 A.D. eruption of Mauna Loa, Island of Hawai‘i

The deadly 1868 A.D. eruption of Mauna Loa’s lower Southwest Rift Zone (Island of Hawai‘i) included a M7.9 earthquake and associated tsunami and landslides, demonstrating the severe hazards posed by Earth’s largest active subaerial volcano. To better understand the relationship between intense seismic activity, dike emplacement, magma storage, transport histories, and mobilization of olivine cumulates at Mauna Loa, we examine compositional zoning of olivine in the 1868 lava flows. Samples range from basalt (< 10% olivine) to picrite (30–40% olivine). The olivine cargo is heterogeneous (Fo 78.2–89.2 ; forsterite = [Mg/(Mg + Fe) × 100]) but dominated by ~ Fo 89 cores that lie above the Fe-Mg equilibrium field of host glasses. Crystal rims < Fo 80 are due to post-eruptive modification in slow cooling lava flows. Minor element compositions fall within the range of other Mauna Loa olivine erupted in the past 200 years. Olivine crystals exhibit both normal and complex Fo zoning patterns that yield timescales of diffusive re-equilibration that range from 3 to 258 days, with 72% of crystals recording 71 days or less. These timescales correspond to magmatic priming of the summit reservoir system ~ 2 months prior to the eruption and the M7.9 earthquake likely facilitated the transport of the crystal-rich summit-derived magmas downrift shortly prior to eruption. If the recently proposed faster Fe-Mg diffusion coefficient is used, timescales instead range from < 1 day to 25 days, with most recording 1 week or less. In this scenario, most of the olivine zoning would have to have been generated after the M7.9 earthquake perturbed the system.

Hawaii↗

USGS2025

The Hardscrabble Creek complex: A newly discovered, mostly buried, Mesoproterozoic mafic-ultramafic pluton in the Wet Mountains, Colorado, USA

The origin of prolific ca. 1.4 Ga ferroan magmatism between the southwestern USA and eastern Canada is enigmatic and has been explained by various models, including extensional, mantle plume, and convergent plate-margin models. Rare mafic plutons are associated with the ferroan plutons, which may help constrain their mantle source and tectonic setting. In the southwestern USA, only two such mafic plutons are known to exist. We present the first evidence for a third, mostly buried, potentially layered, mafic-ultramafic Mesoproterozoic pluton, informally referred to as the Hardscrabble Creek complex, in the central Wet Mountains of Colorado, USA. Recent geophysical data show an elliptical magnetic and gravity high spatially coincident with local gabbroic outcrops. New field and petrographic analyses of these exposed rocks reveal that they consist of ultramafic to mafic cumulates, including orthopyroxenite, olivine norite, norite, and anorthosite. High-precision U-Pb dating of zircon from orthopyroxenite and norite yield weighted mean 206 Pb/ 238 U dates of 1352.36 ± 1.60 Ma and 1352.37 ± 1.71 Ma, respectively. These dates indicate that the complex formed over a narrow timeframe, after the adjacent 1362 ± 7 Ma ferroan San Isabel Granite, and during the waning stages of the regional ca. 1.4 Ga ferroan magmatism. Whole-rock geochemistry and Nd-Sr-Pb isotope compositions of samples from the Hardscrabble Creek complex are similar to those of the San Isabel Granite, suggesting that they were derived from the same or a similar mantle source. The mineral chemistry of the samples is comparable to Proterozoic massif-type anorthosites and related mafic intrusions, indicating that the Hardscrabble Creek complex and San Isabel Granite together represent a rare anorthosite-mangerite-charnockite-granite (AMCG) suite in the southwestern USA. The Hardscrabble Creek complex is unique because it formed ~80 m.y. after the other few mafic plutons in the southwestern USA, and it contains an ultramafic section that is absent from these plutons and rare to the AMCG suite in general. A combination of arc-like whole-rock geochemistry, chondrite uniform reservoir-like Nd-Sr-Pb isotopes, and ocean island basalt (OIB)-like zircon trace element chemistry suggests that the complex was derived from a partial melt of OIB-like mantle and interacted with metasomatically enriched lithospheric mantle. The enriched lithospheric mantle signature, combined with the long ~160 m.y. duration of magmatism in the region, is consistent with a period of protracted convergent tectonism.

Colorado↗

USGS2023

Oligocene–Miocene northward growth of the Tibetan Plateau: Insights from intermontane basins in the West Qinling Belt, NW China

Growth of the Tibetan Plateau, Earth’s broadest and highest elevation collisional system, shapes orographic barriers, reorganizes drainage networks, and influences surface erosion and sediment delivery, whose changes in space and provenance feed back to intracontinental tectonic processes. Studies of interior basins within the northern Tibetan Plateau provide new sediment accumulation, provenance, paleodrainage, and deformation timing data that enable a reconstruction of the far-field tectono-geomorphic evolution of the rising Tibetan Plateau. Along the northern plateau margin, topographic growth in the West Qinling Belt is inferred to have initiated in the Eocene, nearly coeval with the India-Asia collision, as well as in the late Miocene. However, geological knowledge about the intervening period remains at present enigmatic, and the kinematics and dynamics are uncertain. This study presents a multidisciplinary data set from the intermontane Anhua-Huicheng Basin (AHB; Gansu Province, China) to fill this gap. Magnetostratigraphic dating, regional mapping, and sedimentological analysis imply that contractional deformation and thrust-top basin systems formed within the West Qinling Belt in the Oligocene (not later than ca. 24 Ma). A combination of observations including paleocurrent changes, detrital zircon U-Pb age variations, and appearance of growth strata along the Anhua-Huicheng Basin reveal the rapid uplift of the West Qinling Belt at ca. 15 Ma. Sedimentation in the intermontane basins ended after the late Miocene (ca. 8 Ma), when the region experienced intrabasinal deformation, uplift, and erosion with the establishment of an external drainage system. Since the late Miocene, the growth of the West Qinling Belt reached a climax with the lack of substantial contractional deformation in Cenozoic sequences heralding the onset of the modern kinematic regime and attainment of high elevation. Observed transitions in the tectonostratigraphy and paleodrainage define different phases of deformation and plateau-wide shifts in stress reorganization, which led to the northward growth and later lateral expansion of the Tibetan Plateau.

GSA Bulletin↗

USGS2025

Case study of deep learning image segmentation for the purposes of rapid 2D petrographic analysis in volcanic rocks

Automation using deep learning methods is a useful alternative to manual methods of petrographic segmentation, but often requires user familiarity with coding and/or algorithms. We examine the Dragonfly TM program's deep learning tools for application by users with a variety of skill levels as a method for petrographic image segmentation. An image processing methodology, bimodal image stacking, was created for low-input-data, high-efficacy training of models which can then be applied to varied samples. Using backscatter electron images we show that the resulting model segmentations agree with manual segmentation total and modal crystallinity values within 5%, and calculated plagioclase crystal size distribution (CSD) values within 2σ, despite limitations in discriminating mafic phases. Model creation and training takes <24 hours, 1–3 hours of which are supervised, and the resultant model can then be applied to new uncharacterized samples in <15 minutes per image. This allows for non-experts to create and utilize deep learning models to segment images of variable brightness and texture, at low user-time cost and resulting in size and shape data which are within uncertainty of manual segmentation. While some limitations are noted (for example, sieve-textured phases may need manual correction, and different minerals with similar BSE intensity may not be resolved as separate phases), this methodology can be utilized for general application of models to wide ranges of volcanic crystalline and bubble textures, and to create a library of models for rapid petrological analysis during volcanic eruptions.

Alaska↗

USGS2026

Regional variations in sea ice and primary productivity in the Bering Sea during Marine Isotope Stage 11

Marine Isotope Stage (MIS) 11 (424-374 ka) has long been an analog for Holocene climate, because it is the most recent interglacial period with similar orbital conditions. However, there is significant global and regional variability in the climate response to MIS 11 warmth. Here, we review sediment core records from across the Bering Sea to investigate changes in paleoceanographic conditions during Marine Isotope Stages 12-10. Sea ice was present over much of the Bering Sea during MIS 11, but today, none of the sites investigated are ever ice-covered. This suggests that sea ice regimes in the Bering Sea during MIS 11 were different to those of the Holocene. There are also regional differences in the response of sea ice to MIS 11 warming. At the Umnak Plateau, Southeastern Bering Sea, sea ice concentrations decline during deglaciation, but they remain high at the slope sites until Peak MIS 11. Sea ice re-advances over the Umnak Plateau during peak interglacial warmth, at the same time that it declines over the slope sites. Late MIS 11 is characterized by high concentrations of seasonal sea ice at the Umnak Plateau, whilst sea ice at the slope sites fluctuates between consolidated and unconsolidated ice cover. This east-west dichotomy may be explained by changes in the behavior of the Aleutian Low. Productivity increases dramatically during deglaciation due to increased upwelling and sea level rise bringing fresh nutrients into the oceans. This is characterized by increased diatom productivity, increased terrestrial carbon deposition, and laminations at all sites.

Alaska↗

USGS2024

Developments in African industrial minerals for renewable energy

Introduction Africa is emerging as a leading source for minerals used in the manufacture of batteries for electric vehicles and in other renewable energy applications. New graphite, lithium, and rare-earth mines have or could be opened in African countries from 2017 through 2026. Estimates of production capacities for graphite, lithium, and rare-earth mines for 2023 and beyond are based upon supply-side assumptions, such as announced plans for new capacity construction and bankable feasibility studies, as well as projected trends that could affect current producing facilities in 2023 and planned new facilities projected to come online by 2026. Forward-looking information, including estimates of future production capacities, graphite flake distributions, and timing of the start of operations, are subject to risk factors and uncertainties that could cause actual events or results to differ significantly from expected outcomes. Projects listed in this report are presented as an indication of industry plans and are not a U.S. Geological Survey (USGS) prediction of what will take place. Only projects with planned startup dates are included in this report; ther graphite, lithium, and rare-earth projects in Africa without startup dates were known to be in various stages of development but are not included in this fact sheet.

Fact Sheet↗

USGS2024

Assessment of long-term changes in surface-water extent within Klamath Marsh, south-central Oregon, 1985–2021

The annual maximum extent of surface water in Klamath Marsh has naturally fluctuated in response to periods of wet and dry conditions in the surrounding basin. Field observations during the 2010s indicate that the annual maximum extent of surface water has been declining and the marsh is not responding to hydrologic inputs as it had historically. This report describes the results of a hydrologic evaluation of Klamath Marsh to characterize and understand multi-year declines in the surface-water extent and increased intermittency of streamflow exiting the marsh. Landsat imagery collected during 1985–2021 was processed to create a time series of annual maximum surface-water extent to assess changes in surface-water inundation within the marsh. A 50-percent decrease in the mean surface area of annual total open-water extent (TOWE) during the latter half of the study period (2003–21) compared to the first half (1985–2003) was observed in this 37-year time-series dataset. The change in open-water extent was offset by a corresponding increase in dry land in the marsh. Time series of streamflow, groundwater level, total annual precipitation, annual mean temperature, and anthropogenic water use and water management were compiled and evaluated to improve understanding of the factors affecting TOWE. Statistically significant downward trends in the regional groundwater table and streamflow into and out of the marsh were identified as well as statistically significant upward trends in annual mean temperature. Statistically significant correlations among TOWE, streamflow, and groundwater level also were identified. The decreasing trends could not be attributed to changes in total annual precipitation or changing anthropogenic groundwater use within the study area. Declines in the open-water extent of Klamath Marsh since 2000 principally are due to a decoupling of the groundwater and surface-water system beneath the marsh because of regional declines in groundwater level. Regional increases in air temperature and the reestablishment of more than 55,000 acres of forested land within the study area have likely contributed to increasing evapotranspiration, leaving less water available for groundwater recharge and stream base flow and resulting in basin-wide declines in streamflow and groundwater levels.

Oregon↗

USGS2025

Relationship of atmospheric nitrogen deposition to soil nitrogen cycling along an elevation gradient in the Colorado Front Range

Microbial processing of atmospheric nitrogen (N) deposition regulates the retention and mobilization of N in soils, with important implications for water quality. Understanding the links between N deposition, microbial communities, N transformations, and water quality is critical as N deposition shifts toward reduced N and remains persistently high in many regions. Here, we investigated these connections along an elevation transect in the Colorado Front Range. Although rates of N deposition and pools of extractable N increased down the elevation transect, soil microbial communities and N transformation rates did not follow clear elevational patterns. The subalpine microbial community was distinct, corresponding to a high C:N ratio and low pH, while the microbial communities at the lower elevation sites were all very similar. Net nitrification, mineralization, and nitrification potential rates were highest at the Plains (1,700 m) and Montane (2,527 m) sites, suggesting that these ecosystems mobilize N. In contrast, the net immobilization of N observed at the Foothills (1,978 m) and Subalpine (3,015 m) sites suggests that these ecosystems retain N deposition. The contrast in N transformation rates between the plains and foothills, both of which receive elevated N deposition, may be due to spatial heterogeneity not captured in this study and warrants further investigation. Stream N concentrations from the subalpine to the foothills were consistently low, indicating that these soils are currently able to process and retain N deposition, but this may be disrupted if drought, wildfire, or land-use change alter the ability of the soils to retain N.

Colorado↗

USGS2025

Multi-scale geophysical imaging of a hydrothermal system in Yellowstone National Park, USA

Little is known about the local plumbing systems that fuel Yellowstone’s famous hot springs, geysers and mud pots. A multi-method, multi-scale geophysical investigation was carried out in the Obsidian Pool Thermal Area (OPTA) to: (i) delineate the lateral extent of the hydrothermal area and associated surface features; (ii) estimate the dimensions of the upflow zone and identify its main controlling structures; (iii) assess fluids circulation pathways from depth to surface. Ground and airborne geophysical data were acquired to connect local and regional scales, from shallow to large depths. Maps of surface electrical resistivity show a strong correlation with hydrothermal features. At in-termediate depths, electrical resistivity permits delineating the upper limit of the upflow zone, while Poisson’s ratio highlights differences in subsurface fluid content. Combining these results with surface observations and topographic information, we speculate that differential mixing of hydrothermal and fresh water could explain the wide diversity of features observed at OPTA. Low electrical resistivity observed at large depths also suggest that a vast upflow zone, controlled by rhyolite flows and conjugate faults, underlies the OPTA. We speculate that hydrothermal fluids rise along fractures and reach the surface in topographic lows to form hydrothermal features. Our results show that synoptic, multi-scale geophysical measurements provide a roadmap for understanding where and how geologic heterogeneity, topography, fluid-gas separation, and the mixing of thermal and meteoric waters conspire to produce the wide variety of Yellowstone’s renowned hydrothermal features.

Wyoming↗

USGS2024

Geologic map of the southern Stillwater Range, Nevada

The southern Stillwater Range in west-central Nevada contains the western part of the Oligocene Stillwater-Clan Alpine caldera complex, which extends about 55 kilometers (km) east from the west side of the Stillwater Range to the northwestern Desatoya Mountains. The complex consists of at least seven nested ignimbrite calderas and subjacent plutonic rocks emplaced into a complex basement composed of Mesozoic metasedimentary and metavolcanic rocks and Cretaceous granitic plutons. The calderas formed during large-volume (100s to greater than (>) 2,500 cubic kilometers [km 3 ]) eruptions of silicic ignimbrites between about 30.4 and 25.1 million years before present (Ma). The Job Canyon and Poco Canyon calderas and the western part of the much larger Elevenmile Canyon caldera, and their plutonic roots, are exposed in the southern Stillwater Range. There, the caldera complex was steeply tilted during large-magnitude crustal extension in the middle Miocene, and further exhumed during the late Miocene to Holocene Basin and Range extension that formed the modern Stillwater Range. This tilted crustal section affords an exceptional opportunity to view structural cross sections of ignimbrite calderas and their plutonic roots to paleodepths as much as 9–10 km.

Nevada↗

USGS2025

Gaps in water quality modeling of hydrologic systems

This review assesses gaps in water quality modeling, emphasizing opportunities to improve next-generation models that are essential for managing water quality and are integral to meeting goals of scientific and management agencies. In particular, this paper identifies gaps in water quality modeling capabilities that, if addressed, could support assessments, projections, and evaluations of management alternatives to support ecosystem health and human beneficial use of water resources. It covers surface water and groundwater quality modeling, dealing with a broad suite of physical, biogeochemical, and anthropogenic drivers. Modeling capabilities for six constituents (or constituent categories) are explored: water temperature, salinity, nutrients, sediment, geogenic constituents, and contaminants of emerging concern. Each constituent was followed through the coupled atmospheric-hydrologic-human system, with prominent modeling gaps described for a diverse array of relevant inputs, processes, and human activities. Commonly identified modeling gaps primarily fall under three types: (1) model gaps, (2) data gaps, and (3) process understanding gaps. In addition to potential solutions for addressing specific individual modeling limitations, some broad approaches (e.g., enhanced data collection and compilation, machine learning, reduced-complexity modeling) are discussed as ways forward for tackling multiple gaps. This gap analysis establishes a framework of diverse approaches that may support improved process representation, scale, and accuracy of models for a wide range of water quality issues.

Water↗

USGS2025

Paleoproterozoic vein graphite mineralization caused by decarbonation in the Ruby Range, Montana, USA

Hydrothermal graphite veins are a possible source for modern battery materials and require better understanding of their carbon source(s) and absolute timing to develop mapable criteria for exploration models. We present new observations of graphite vein and alteration paragenesis and U-Pb LA-ICP-MS titanite age data from the Ruby prospect, Montana, USA, that constrain mineralization timing and source. The graphite veins cut high-temperature metamorphic rocks of the lower Christensen Range suite and are associated with intense diopside (Di0.69Hd0.27Jo0.04) alteration of marble. The oldest titanite ages in fresh marble and partially altered calc-silicate gneiss are ca. 2,500 – 2,450 Ma, show elevated REE values, and Eu/Eu* <1.5, consistent with growth during early regional metamorphism. Titanite in diopside-graphite alteration, interpreted as part of the hydrothermal vein-forming episode, cluster around 1,750 Ma, are characterized by lower REE values, and show Eu/Eu* >2; suggesting a low fO 2 fluid generated from metamorphism during the Big Sky orogeny. Our paragenetic observations and titanite ages indicate graphite vein formation via skarnoid decarbonation reactions in marble late in regional orogenesis. Granulite-facies, carbonate-bearing, supracrustal rock terranes are thus favorable for hydrothermal graphite vein deposits.

Montana↗

USGS2026

Increasing artificial light at night enhances salmonid predator foraging efficiency in an urbanized lake

Artificial light at night (ALAN) poses a threat to ecosystems globally. It includes both direct and indirect light, or skyglow, which occurs when ALAN scatters in the atmosphere, extending beyond its original source. We analyzed ALAN trends in Lake Washington, WA, from 2014 to 2023 using Visible Infrared Imaging Radiometer Suite (VIIRS) nighttime light measurements, evaluated the relationship between in situ and satellite measurements, and modeled predator search volumes for a juvenile salmon predator, cutthroat trout ( Oncorhynchus clarki ), as a function of ambient light and turbidity conditions. Open water regions experienced significant increases in ALAN, while nearshore areas primarily showed no or negative trends, revealing the role of skyglow in shaping open water light environments. Using a visual foraging model for cutthroat trout, we found that juvenile salmon at the shallow southern pelagic site experienced light 28 times brighter, resulting in a 168% greater predation vulnerability than those at the northern site. In the Ship Canal, a narrow corridor for outmigrating salmon, predator search volumes were 249% higher than at the southern site. These contrasts in predation vulnerability demonstrate how local conditions influence predator–prey dynamics and provide critical insight for targeting mitigation of both nearshore and distant light sources.

Washington↗

USGS2026

Long-term intermittent connection between the western Snake River Plain and Columbia basin: A two-phased incision history of Hells Canyon

For more than a century, researchers have debated the route of the Snake River across the northern Cordillera and U.S. Pacific Northwest, including the associated incision history of Hells Canyon. Here, we use detrital zircon U-Pb provenance analysis of Miocene strata upstream and downstream of Hells Canyon to constrain the evolution in fluvial pathways over time. Downstream of Hells Canyon, we show that the ca. 10−6 Ma Clarkston Heights gravel was dominantly sourced from the nearby Salmon and Clearwater rivers but also with substantial input from drainages that now flow into the western Snake River Plain. These same western Snake River Plain drainages were contributing to time-equivalent Lake Idaho strata, upstream of Hells Canyon, indicating a Hells Canyon fluvial connection between the western Snake River Plain and Columbia basin before 6 Ma. Results from Lake Idaho strata suggest a two-phased lacustrine history in the western Snake River Plain: Before ca. 6.0 Ma, lake strata were derived from local tributaries, suggesting that the western Snake River Plain was isolated from the modern upper Snake River system. Between ca. 4.3 Ma and 2.2 Ma, the source area expanded to include eastern tributaries in conjunction with migration of high-standing topography of the Yellowstone hotspot. Our results challenge the long-held hypothesis of “capture” of the Snake River through Hells Canyon. Instead, we infer that Hells Canyon was a long-established route for outflow of lakes occupying the western Snake River Plain, possibly intermittently, during a ca. 10−2 Ma phase of slow regional incision, followed by rapid incision in Hells Canyon starting ca. 2 Ma in conjunction with erosion of the topographic barrier impounding Lake Idaho.

Idaho, Oregon↗

USGS2025

A time-space model of graphite mineral systems

Increasing demand for graphite in energy storage systems warrants review of graphite ore genesis in a mineral systems framework. Orogenic graphite encompasses the metamorphic and orogenic mineral systems that produce flake graphite and hydrothermal vein (lump and chip) graphite deposits, respectively. A common feature of orogenic graphite deposits is an association with upper amphibolite- to granulite-facies metasedimentary rocks in continent-continent or continent-island arc collisional orogens. Orogenic flake graphite deposits form primarily through graphitization of organic carbon during regional metamorphism, but strain localization and partial melting of pelitic protoliths are likely important processes for graphite grade and quality enrichment. Orogenic vein graphite deposits precipitate from hydrothermal fluids, possibly derived from metamorphism or anatexis at depth. Decarbonation reactions in mixed calcareous-carbonaceous metasedimentary sequences are the most likely carbon sources for the veins. In contrast, intrusion-related graphite includes magmatic-hydrothermal and metamorphic mineral systems that form primarily in continental arc settings via the interaction of magmas with carbonaceous sedimentary packages. Magmatic-hydrothermal flake graphite deposits are hosted in plutonic and volcanic rocks, and result from the exsolution of CO 2 -CH 4 -rich fluids from melts contaminated by such packages. Contact metamorphism of carbonaceous sedimentary rocks by plutons produces some microcrystalline (amorphous) graphite deposits, including many in China. Compilation of geologic data from known graphite deposits globally suggests that pulses of carbon deposition in the Paleoproterozoic, Mesoproterozoic, and Neoproterozoic provided source carbon material. Subsequent supercontinent orogenesis at ca. 2,100 to 1,700 Ma (Columbia), ca. 1,300 to 1,000 Ma (Rodinia), and ca. 650 to 500 Ma (Gondwana) resulted in the genesis of orogenic flake and vein graphite deposits, where favorable geologic components overlapped with organic ± carbonate carbon-rich strata. Cryogenian deposition of graphite protoliths and Cryogenian – Cambrian metamorphic mineralization account for nearly 75% of all known resources globally and coincide with profound carbon isotope excursions and climate variability, implying a link with the global carbon budget. Comparatively few graphite deposits are associated with Pangea-forming orogens, attributed to less exhumation and/or denudation. High-temperature metasedimentary belts containing organic carbon-rich protoliths are most favorable for hosting orogenic flake graphite deposits, whereas sequences that also contain carbonate protoliths are favorable for orogenic graphite veins. Continent-scale orogenic belts may host both deposit types along with vanadium deposits. Use of a time-space mineral systems framework for graphite deposits can improve exploration models needed to ensure future supply of this critical mineral and provide insights into Earth’s long-term carbon cycle.

Mineralium Deposita↗

USGS2025

Seamless Geologic Map Database for the Intermountain West, United States: A foundational dataset for mineral systems analysis

The Intermountain West has a complex geologic history, resulting in the formation of a diverse array of mineral deposits. Effective mineral exploration requires understanding the spatial and temporal relationships among geologic processes and events, a key focus of the mineral systems approach to exploration. This paper presents the Intermountain West Seamless Geologic Map Database, a unified dataset designed to support mineral exploration. Integrating geologic provinces, structural settings, and hydrothermal alteration, the database leverages the Seamless Integrated Geologic Mapping (SIGMa) extension to the USGS Geologic Map Schema (GeMS) to standardize geologic data from varied sources. SIGMa's hierarchical stratigraphic organization and feature-level metadata enhance data interoperability and reusability, enabling seamless query, analysis, and visualization of lithology, structural features, mineral deposits, geochronology, hydrothermal alteration. volcanic activity, and By providing a regionally consistent and dynamically evolving geologic map, this database provides a foundational framework for mineral exploration and geologic research. It also allows for an efficient workflow that expedites the publication of integrated geologic map databases.

Conference Paper↗

USGS2024

Potential corrosivity of untreated groundwater in Louisiana

Corrosive groundwater can cause lead, copper, and other metals to leach from pipes and plumbing fixtures in water distribution systems. Metals, if ingested, could lead to serious health implications to the nearly 2.9 million people in Louisiana who obtain their drinking water from groundwater sources. Four indices—the Langelier Saturation Index (LSI), Ryznar Stability Index (RSI), Puckorius Scaling Index (PSI), and the Potential to Promote Galvanic Corrosion (PPGC)—in addition to an analysis which normalized the results from the existing indices, the Combined Index (CI), were used to assess the corrosivity of groundwater in Louisiana and identify areas within eight major aquifers and aquifer systems with moderate to high corrosivity potential. The purpose of this study is to provide State and local governments, public water system managers, and the nearly 500,000 private well owners in Louisiana with information needed to manage drinking-water supplies and mitigate potential health risks related to leaching of metals from water pipes and fixtures. The average scores of untreated groundwater samples from approximately 375 wells by index are as follows: LSI, −1.28; RSI, 9.78; PSI, 9.34; and CI, 4.14. The PPGC does not produce a numerical score, but the total percentage of class counts can be used to assign a classification; overall, samples in Louisiana were classified as significant concern. The percentages of groundwater samples from wells classified as potentially corrosive, by index, are as follows: LSI, 53 percent; RSI, 94 percent; PSI, 81 percent; PPGC, 98 percent; and CI, 81 percent. The percentages of samples classified as indeterminate, by index, are as follows: LSI, 46 percent; RSI, 5 percent; PSI, 12 percent; PPGC, 0 percent; and CI, 18 percent.

Louisiana↗

USGS2024

Recent applications of the USGS National Crustal Model for Seismic Hazard Studies

The U.S. Geological Survey is developing the National Crustal Model (NCM) for seismic hazard studies to facilitate modeling site, path, and source components of seismic hazard across the conterminous United States. The NCM is composed of a 1km grid of geophysical profiles, extending from the Earth’s surface into the upper mantle. It is constructed from a threedimensional (3D) geologic framework and geophysical rules that use (1) a petrologic and mineral physics database; (2) a 3D temperature model; and (3) a calibrated rock type- and age-dependent porosity model. Parameters needed to estimate site response for existing ground motion models (GMMs), including the time-averaged velocity in the upper 30 meters (VS30), the depths to 1.0 and 2.5 km/s shear-wave velocity (Z1.0 and Z2.5), and sediment thickness, can be computed from the NCM. As GMMs continue to improve in the future, other metrics could also be extracted or derived from the NCM, such as fundamental period, site attenuation (ko), a fully frequency-dependent site response function, or 3D geophysical volumes for wavefield simulations. Application of the NCM may also benefit other aspects of seismic hazard analysis, including better accounting for path-dependent attenuation and geometric spreading, more accurate estimation of earthquake source properties such as hypocentral location and stress drop, and calculation of crustal strength profiles that inform estimates of the base of seismicity.

conterminous United States↗