Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geological Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85Linked to original sources
USGS1981

Regional geochemical studies in the Patagonia Mountains, Santa Cruz County, Arizona

The Patagonia Mountains in southern Arizona contain the deeply buried porphyry copper system at Red Mountain as well as a number of other base- and precious-metal mines and prospects. The range contains complex Basin and Range geology with units ranging in age from Precambrian to Holocene. Rock types present include igneous intrusive and extrusive units as well as sedimentary and metamorphic units, most of which have been tectonically disturbed. A total of 264 stream-sediment samples were collected and analyzed for 32 elements. Geochemical maps for Sb, Ag, Pb, Te, B, Mn, Au, Zn, Cu (total), Cu (cold-extractable), and Mo, as well as for Cu (cold-extractable)/Cu (total) and Fe/Mn, are presented. Anomaly patterns for these elements generally occur over the Red Mountain deposit and (or) along a north-northwest trend parallel to the major Harshaw Creek Fault. Much of the entire area sampled contains widespread anomalies for Pb, Te, and Cu; the other elements are only locally anomalous. Various plots of ratios of Cu (cold-extractable) to Cu (total) did not produce any new information not readily apparent on either one of the two copper maps. A plot of ratios of Fe to Mn delineated many areas of pyrite mineralization. Several of these areas may represent the pyritic halos around deeply buried porphyry copper systems. The best ore guide for the Red Mountain porphyry system is the coincidence of positive anomalies of Mo, Pb, and Te and a negative anomaly of Mn. Other areas with anomalies of the same suite of elements are present within the Patagonia Mountains. It is concluded that geochemical sampling, even in a highly contaminated area, can be useful in delineating major geologic features, such as porphyry copper belts and major faults. Multielement geochemical surveys on a regional scale can effectively locate large, deeply buried, zoned mineral systems such as that at Red Mountain. Plots of element ratios, where adequately understood, can provide geochemical information not readily discernible from plots of single elements alone.

Arizona↗
USGS2006

Step wise, multiple objective calibration of a hydrologic model for a snowmelt dominated basin

The ability to apply a hydrologic model to large numbers of basins for forecasting purposes requires a quick and effective calibration strategy. This paper presents a step wise, multiple objective, automated procedure for hydrologic model calibration. This procedure includes the sequential calibration of a model's simulation of solar radiation (SR), potential evapotranspiration (PET), water balance, and daily runoff. The procedure uses the Shuffled Complex Evolution global search algorithm to calibrate the U.S. Geological Survey's Precipitation Runoff Modeling System in the Yampa River basin of Colorado. This process assures that intermediate states of the model (SR and PET on a monthly mean basis), as well as the water balance and components of the daily hydrograph are simulated, consistently with measured values.

Journal of the American Water Resources Associatio↗
USGS2006

A note on the correlation between geophysical observations and seismicity in the Arava/(Araba) Valley at the southern part of the Dead Sea fault

The spatial distribution of the earthquakes in the Arava Valley, a 150-km section of the Dead Sea Transform, is compared for the first time with the local subsurface geological features derived from geophysical and geological data. Gravity data suggested that the Gharandal, Timna, and Elat basins were filled by low-density young sediments. These features were confirmed by seismic reflection profiles and high-resolution aeromagnetic (HRAM) survey. The HRAM survey delineated the trace of the Dead Sea Transform (DST), which separates magnetic anomalies in the eastern and western parts of the valley, and revealed the occurrence of the unknown deep magmatics. Overall, the earthquake activity appears to be strongly related to the Dead Sea Transform. However, on a local scale, there is no apparent correlation between the seismicity and the mapped fault segments comprising the DST fault system. Absence of the correlation may be a result of insufficient accuracy of the earthquake localization and/or the inclined fault plane. However, in spite of such inaccuracy, it is clearly observed that the large clusters of the low-magnitude earthquakes coincide well with the sedimentary basins. Two pronounced clusters appear to coincide with the subsurface magmatics. We assume that the subsurface geology predetermines areas of stress accumulation and earthquakes. These areas can be the end of faults, or fault jogs, which sometimes create basins. Magmatism can also be affected by the stress field and predetermine the stress and earthquakes' allocation. ?? 2007 Science From Israel/LPPLtd.

Israel Journal of Earth Sciences↗
USGS2023

Evaluating a prospective fault-based stress-transfer forecast for the M7.9 Wenchuan earthquake region 15 years later

Four days after the 12 May 2008 M 7.9 Wenchuan earthquake struck the Sichuan region of China, we submitted a prospective earthquake forecast based on transfer of stress from the mainshock onto significant faults crossing through populated areas. We identified where the largest aftershocks were likely to occur that could cause loss of life. We returned the revised article to the journal on 5 June 2008, marking the last day of our observation period. The primary testable features are locations and focal mechanisms of larger ( M ≥ 4.5) earthquakes; did these events happen on or very near the faults we said they would? Did they have the same strikes, dips, and rakes as the faults we modeled? In retrospect, is the stress transfer method consistent with all M ≥ 4.5 earthquakes that occurred? We find all but one M ≥ 4.5 aftershock with known focal mechanisms located on stress‐increased faults, and their focal mechanism parameters overlap with geological characteristics we used in making calculations. Six of the seven lethal M > 4.5 earthquakes that occurred in the region since 5 June 2008 were located on stress‐increased faults, with the lone exception triggered by hydraulic fracturing.

The Seismic Record↗
USGS1966

Soviet books and publications on hydrology (continental) and hydrogeology: titles and some notes on obtaining Soviet monographs

A common method of publication for Soviet scientists, which partly supplants periodicals, is the publication of a collection of articles on a general area of research, frequently by members of a given institution. An extensive sampling of world geologic literature for 1961 (Hawkes, 1966) showed that 33 percent of Soviet titles appeared in periodicals whereas 55 percent of North American and 70 percent of Western European literature appeared in this form. The Soviet predilection for symposia and collections of papers makes searching for information on a given subject more difficult for Westerners because the monographs in question are often not included in exchange agreements (except informal personal ones) with Western libraries and institutions, because they may be primed in small editions, and because such publications frequently escape the notice of Western abstract journals. Unless one is fortunate enough to have many personal contacts in the Soviet Union, there seems to be little alternative to at least a rudimentary knowledge of Russian in order to stay abreast of work published as monographs and in collections.

Union Of Soviet Socialist Republics↗
USGS2010

Assessment of basin-scale hydrologic impacts of CO2 sequestration, Illinois basin

Idealized, basin-scale sharp-interface models of CO2 injection were constructed for the Illinois basin. Porosity and permeability were decreased with depth within the Mount Simon Formation. Eau Claire confining unit porosity and permeability were kept fixed. We used 726 injection wells located near 42 power plants to deliver 80 million metric tons of CO2/year. After 100 years of continuous injection, deviatoric fluid pressures varied between 5.6 and 18 MPa across central and southern part of the Illinois basin. Maximum deviatoric pressure reached about 50% of lithostatic levels to the south. The pressure disturbance (>0.03 MPa) propagated 10-25 km away from the injection wells resulting in significant well-well pressure interference. These findings are consistent with single-phase analytical solutions of injection. The radial footprint of the CO2 plume at each well was only 0.5-2 km after 100 years of injection. Net lateral brine displacement was insignificant due to increasing radial distance from injection well and leakage across the Eau Claire confining unit. On geologic time scales CO2 would migrate northward at a rate of about 6 m/1000 years. Because of paleo-seismic events in this region (M5.5-M7.5), care should be taken to avoid high pore pressures in the southern Illinois basin. ?? 2010 Elsevier Ltd.

International Journal of Greenhouse Gas Control↗
USGS2001

Resolution analysis of finite fault source inversion using one- and three-dimensional Green's functions 1. Strong motions

We develop a methodology to perform finite fault source inversions from strong motion data using Green's functions (GFs) calculated for a three-dimensional (3-D) velocity structure. The 3-D GFs are calculated numerically by inserting body forces at each of the strong motion sites and then recording the resulting strains along the target fault surface. Using reciprocity, these GFs can be recombined to represent the ground motion at each site for any (heterogeneous) slip distribution on the fault. The reciprocal formulation significantly reduces the required number of 3-D finite difference computations to at most 3NS, where NS is the number of strong motion sites used in the inversion. Using controlled numerical resolution tests, we have examined the relative importance of accurate GFs for finite fault source inversions which rely on near-source ground motions. These experiments use both 1-D and 3-D GFs in inversions for hypothetical rupture models in order (1) to analyze the ability of the 3-D methodology to resolve trade-offs between complex source phenomena and 3-D path effects, (2) to address the sensitivity of the inversion results to uncertainties in the 3-D velocity structure, and (3) to test the adequacy of the 1-D GF method when propagation effects are known to be three-dimensional. We find that given "data" from a prescribed 3-D Earth structure, the use of well-calibrated 3-D GFs in the inversion provides very good resolution of the assumed slip distribution, thus adequately separating source and 3-D propagation effects. In contrast, using a set of inexact 3-D GFs or a set of hybrid 1-D GFs allows only partial recovery of the slip distribution. These findings suggest that in regions of complex geology the use of well-calibrated 3-D GFs has the potential for increased resolution of the rupture process relative to 1-D GFs. However, realizing this full potential requires that the 3-D velocity model and associated GFs should be carefully validated against the true 3-D Earth structure before performing the inverse problem with actual data.

Journal of Geophysical Research B: Solid Earth↗
USGS1999

Photogrammetric analysis of horizon panoramas: The Pathfinder landing site in Viking orbiter images

Tiepoint measurements, block adjustment techniques, and sunrise/sunset pictures were used to obtain precise pointing data with respect to north for a set of 33 IMP horizon images. Azimuth angles for five prominent topographic features seen at the horizon were measured and correlated with locations of these features in Viking orbiter images. Based on this analysis, the Pathfinder line/sample coordinates in two raw Viking images were determined with approximate errors of 1 pixel, or 40 m. Identification of the Pathfinder location in orbit imagery yields geological context for surface studies of the landing site. Furthermore, the precise determination of coordinates in images together with the known planet-fixed coordinates of the lander make the Pathfinder landing site the most important anchor point in current control point networks of Mars.

Journal of Geophysical Research E: Planets↗
USGS1977

Field expectations and the determination of wildcat drilling

There is currently some dissatisfaction with macroeconomic approaches to modeling the supply of domestic crude oil. One problem that has been pointed out is that the estimated supply responses of new discoveries brought about by price increases appear to be unrealistically high. Because data frequently used in these models are highly aggregated over time and include diverse geologic regions, this criticism may not be unwarranted. Moreover, with highly aggregated data testable hypotheses relating to operator behavior at the field level are limited. Because of the somewhat decentralized nature of firm decision making, operator field behavior significantly affects the wildcat drilling rate and hence the interarrival times, i.e., temporal sequence, of expected discoveries.

Southern Economic Journal↗
USGS2019

Selected trace-elements in alluvium and rocks, western Mojave Desert, southern California

Concentrations of twenty-seven elements, including naturally-occurring water-quality contaminants arsenic, chromium, and uranium, were measured in 217 samples of alluvium and rock from the western Mojave Desert, southern California, using portable (pXRF) and laboratory (LXRF) X-ray fluorescence. Comparison of measurements with NIST-traceable standards was good, although pXRF overestimated iron compared to LXRF. Results suggest pXRF survey data are sufficiently accurate to assess regional geochemical differences in geologic-source terrains. Principal component analysis showed rubidium and potassium were associated with alluvium eroded from felsic terrain, while iron, copper, chromium, and to a lesser extent titanium, manganese, and nickel were associated with alluvium eroded from mafic terrain. Zinc, vanadium, and arsenic were associated with alluvium eroded from hydrothermal terrain. Elemental assemblages associated with different source terrains were traced spatially to identify the source and composition of alluvium composing aquifers pumped for water supply. Changes in geologic source terrain to the Mojave River, associated with movement along the San Andreas Fault over the past one to five million years, reduced the mafic fraction and increased the felsic fraction of alluvium deposited to the regionally important floodplain aquifer along the Mojave River—lowering chromium concentrations in alluvium through geologic time. Comparison of pXRF and sequential extraction data from 40 samples showed arsenic and uranium were more abundant on the surfaces of mineral grains, while chromium and vanadium remained mostly within unweathered mineral grains—suggesting arsenic and uranium may be more readily mobilized into groundwater with changes in pH, redox, or ionic strength than chromium or vanadium.

California↗
USGS2001

Toward a national fuels mapping strategy: Lessons from selected mapping programs

The establishment of a robust national fuels mapping program must be based on pertinent lessons from relevant national mapping programs. Many large-area mapping programs are under way in numerous Federal agencies. Each of these programs follows unique strategies to achieve mapping goals and objectives. Implementation approaches range from highly centralized programs that use tightly integrated standards and dedicated staff, to dispersed programs that permit considerable flexibility. One model facilitates national consistency, while the other allows accommodation of locally relevant conditions and issues. An examination of the programmatic strategies of four national vegetation and land cover mapping initiatives can identify the unique approaches, accomplishments, and lessons of each that should be considered in the design of a national fuel mapping program. The first three programs are the U.S. Geological Survey Gap Analysis Program, the U.S. Geological Survey National Land Cover Characterization Program, and the U.S. Fish and Wildlife Survey National Wetlands Inventory. A fourth program, the interagency Multiresolution Land Characterization Program, offers insights in the use of partnerships to accomplish mapping goals. Collectively, the programs provide lessons, guiding principles, and other basic concepts that can be used to design a successful national fuels mapping initiative.

International Journal of Wildland Fire↗
USGS2007

Effects of multi-scale environmental characteristics on agricultural stream biota in eastern Wisconsin

The U.S. Geological Survey examined 25 agricultural streams in eastern Wisconsin to determine relations between fish, invertebrate, and algal metrics and multiple spatial scales of land cover, geologic setting, hydrologic, aquatic habitat, and water chemistry data. Spearman correlation and redundancy analyses were used to examine relations among biotic metrics and environmental characteristics. Riparian vegetation, geologic, and hydrologic conditions affected the response of biotic metrics to watershed agricultural land cover but the relations were aquatic assemblage dependent. It was difficult to separate the interrelated effects of geologic setting, watershed and buffer land cover, and base flow. Watershed and buffer land cover, geologic setting, reach riparian vegetation width, and stream size affected the fish IBI, invertebrate diversity, diatom IBI, and number of algal taxa; however, the invertebrate FBI, percentage of EPT, and the diatom pollution index were more influenced by nutrient concentrations and flow variability. Fish IBI scores seemed most sensitive to land cover in the entire stream network buffer, more so than watershed-scale land cover and segment or reach riparian vegetation width. All but one stream with more than approximately 10 percent buffer agriculture had fish IBI scores of fair or poor. In general, the invertebrate and algal metrics used in this study were not as sensitive to land cover effects as fish metrics. Some of the reach-scale characteristics, such as width/depth ratios, velocity, and bank stability, could be related to watershed influences of both land cover and geologic setting. The Wisconsin habitat index was related to watershed geologic setting, watershed and buffer land cover, riparian vegetation width, and base flow, and appeared to be a good indicator of stream quality. Results from this study emphasize the value of using more than one or two biotic metrics to assess water quality and the importance of environmental characteristics at multiple scales.

Wisconsin↗
USGS2011

Critical steps for the continuing advancement of hydrogeophysics

Special hydrogeophysics issues published by hydrology and geophysics journals, special sessions and workshops at conferences, and an increasing number of short courses demonstrate the growing interest in the use of geophysics for hydrologic investigations. The formation of the hydrogeophysics technical subcommittee of AGU's Hydrology section adds further evidence of the recognized significance of this growing interdisciplinary field. Given the clear value of nondestructive and nonintrusive imaging for subsurface investigations, we believe the advances in the adoption of existing geophysical methods, the development of novel methods, and the merging of geophysical and other data made in hydrogeophysics could be applied to a wide range of geological, environmental, and engineering applications.

Eos Science News↗
USGS1995

1995 annual report on Alaska's mineral resources

Section 1011 of the Alaska National Interest Lands Conservation Act (ANILCA) of 1980, as amended, requires that "On or before October 1, 1982, and annually thereafter, the President shall transmit to the Congress all pertinent public information relating to minerals in Alaska gathered by the United States Geological Surveys, United States Bureau of Mines, and any other Federal agency." This report has been prepared in response to that requirement. This circular is the fourteenth in the series of annual mineral reports mandated by the ANILCA. The report provides information about current Alaskan mineral projects and events during 1994; the emphasis is on Federal activity. The report addresses both onshore and offshore areas of Alaska. The U.S. Geological Survey (USGS), U.S. Bureau of Mines (USBM), and Minerals Management Service (MMS) are the principal Federal agencies that publish information about energy and mineral resources in Alaska. Their reports and data form the basis for decisions by other Federal agencies regarding land use, access, environmental impacts, and mining claim evaluation. The time required for sample analysis, data synthesis, and publication is lengthy; as a result, scientific reports are generally issued a year or more after initial sample and data collection. Other sources of information for this report include additional Federal and State publications, trade and professional journals, presentations at public meetings and hearings, and press releases. Information is provided for two broad categories of minerals: energy resources and nonfuel-mineral resources.

Circular↗
USGS2016

Long period seismicity and very long period infrasound driven by shallow magmatic degassing at Mount Pagan, Mariana Islands

Long period (LP) seismicity and very long period infrasound (iVLP) were recorded during continuous degassing from Mount Pagan, Mariana Islands, in July 2013 to January 2014. The frequency content of the LP and iVLP events and delay times between the two arrivals were remarkably stable and indicate nearly co-located sources. Using phase-weighted stacking over similar events to dampen noise, we find that the LP source centroid is located 60 m below and 180 m west of the summit vent. The moment tensor reveals a volumetric source modeled as resonance of a subhorizontal sill intersecting a dike. We model the seismoacoustic wavefields with a coupled earth-air 3-D finite difference code. The ratios of pressure to velocity measured at the infrasound arrays are an order of magnitude larger than the synthetic ratios, so the iVLP is not the result of LP energy transmitting into the atmosphere at its epicenter. Based on crater shape and dimensions determined by structure from motion, we model the iVLP as acoustic resonance of an exponential horn. The source of the continuous plume from gas analysis is shallow magmatic degassing, which repeatedly pressurized the dike-sill portion of the conduit over the 7 months of observation. Periodic gas release caused the geologically controlled sill to partially collapse and resonate, while venting of gas at the surface triggered resonance in the crater. LP degassing only accounts for ~12% of total degassing, indicating that most degassing is relatively aseismic and that multiple active pathways exist beneath the vent.

Mount Pagan↗
USGS1982

Uraniferous opal, Virgin Valley, Nevada: Conditions of formation and implications for uranium exploration

Uraniferous, fluorescent opal, which occurs in tuffaceous sedimentary rocks at Virgin Valley, Nevada, records the temperature and composition of uranium-rich solutions as well as the time of uranium-silica coprecipitation. Results are integrated with previous geologic and geochronologic data for the area to produce a model for uranium mobility that may be used to explore for uranium deposits in similar geologic settings. Uraniferous opal occurs as replacements of diatomite, or silicic air-fall ash layers in tuffaceous lakebeds of the Virgin Valley Formation (Miocene) of Merriam (1907). Fission-track radiography shows uranium to be homogeneously dispersed throughout the opal structure, suggesting coprecipitation of dissolved uranium and silica gel. Fluid inclusions preserved within opal replacements of diatomite have homogenization temperatures in the epithermal range and are of low salinity. Four samples of opal from one locality all have U-Pb apparent ages which suggest uraniferous opal precipitation in late Pliocene time. These ages correspond to a period of local, normal faulting, and highangle faults may have served as vertical conduits for transport of deep, thermalized ground water to shallower levels. Lateral migration of rising solutions occurred at intersections of faults with permeable strata. Silica and some uranium were dissolved from silica-rich host strata of 5–20 ppm original uranium content and reprecipitated as the solutions cooled. The model predicts that in similar geologic settings, ore-grade concentrations of uranium will occur in permeable strata that intersect high-angle faults and that contain uranium source rocks as well as efficient reductant traps for uranium. In the absence of sufficient quantities of reductant materials, uranium will be flushed from the system or will accumulate in low-grade disseminated hosts such as uraniferous opal.

Nevada↗
USGS2003

Athena Microscopic Imager investigation

The Athena science payload on the Mars Exploration Rovers (MER) includes the Microscopic Imager (MI). The MI is a fixed‐focus camera mounted on the end of an extendable instrument arm, the Instrument Deployment Device (IDD). The MI was designed to acquire images at a spatial resolution of 30 microns/pixel over a broad spectral range (400–700 nm). The MI uses the same electronics design as the other MER cameras but has optics that yield a field of view of 31 × 31 mm across a 1024 × 1024 pixel CCD image. The MI acquires images using only solar or skylight illumination of the target surface. A contact sensor is used to place the MI slightly closer to the target surface than its best focus distance (about 66 mm), allowing concave surfaces to be imaged in good focus. Coarse focusing (∼2 mm precision) is achieved by moving the IDD away from a rock target after the contact sensor has been activated. The MI optics are protected from the Martian environment by a retractable dust cover. The dust cover includes a Kapton window that is tinted orange to restrict the spectral bandpass to 500–700 nm, allowing color information to be obtained by taking images with the dust cover open and closed. MI data will be used to place other MER instrument data in context and to aid in petrologic and geologic interpretations of rocks and soils on Mars.

Journal of Geophysical Research E: Planets↗
USGS1962

Lower temperature terminations of the three-phase region plagioclase-alkali feldspar-liquid

Geological and experimental evidence indicate that the three-phase field, plagioclase-alkalifeldspar-liquid, may terminate in several different ways. The possible terminations have been developed from Schreinemakers' rules governing the disappearance of three-phase fields. In igncous rocks, these different terminations may arise from variations in the relative amounts of additional components in magmas, or from changes of total pressure, or from structural changes that effect the extent of solid solution in feldspar.The three-phase region originates from the intersection of the solidus and the feldspar solvus. The available evidence regarding this intersection is reviewed, as is the evidence for the existence and form of the boundary curve on the feldspar liquidus. The data are used to project a series of isobaric polythermal and isobaric isothermal diagrams for each possible termination . Subsequent discussions relate the theoretical arguments to the natural evidence, suggest the more probable geological environments of some of the terminations , and indicate characteristic features of each termination .It may be possible to identify the type of termination involved in the crystallization of some rocks. The necessary data are the amounts and compositions of both kinds of coexisting feldspars and of the feldspar components of the coexisting liquid at one or more stages of the crystallization process. Volcanic rocks are most suitable for such studies.The terminations explain many of the compositional relationships possible between feldspar crystals and silicate melt under geological and experimental conditions. These compositional relationships are fundamental to understanding the crystallization of igneous rocks and the formation of melts by partial fusion. Other geological applications include a simple explanation for some resorbed feldspars, the separation, correlation, and comparison of porphyritic rock units, interpretation of compositional changes of successive zones of zoned feldspars, and mantling of one feldspar by another. With all types of termination , extensive fractionation yields a liquid rich in Or and Ab that may crystallize to alkali feldspar or feldspars.

Journal of Petrology↗