Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “California Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85Linked to original sources
USGS2015

Identifying block structure in the Pacific Northwest, USA

We have identified block structure in the Pacific Northwest (west of 116°W between 38°N and 49°N) by clustering GPS stations so that the same Euler vector approximates the velocity of each station in a cluster. Given the total number k of clusters desired, the clustering procedure finds the best assignment of stations to clusters. Clustering is calculated for k= 2 to 14. In geographic space, cluster boundaries that remain relatively stable as k is increased are tentatively identified as block boundaries. That identification is reinforced if the cluster boundary coincides with a geologic feature. Boundaries identified in northern California and Nevada are the Central Nevada Seismic Belt, the west side of the Northern Walker Lane Belt, and the Bartlett Springs Fault. Three blocks cover all of Oregon and Washington. The principal block boundary there extends west-northwest along the Brothers Fault Zone, then north and northwest along the eastern boundary of Siletzia, the accreted oceanic basement of the forearc. East of this boundary is the Intermountain block, its eastern boundary undefined. A cluster boundary at Cape Blanco subdivides the forearc along the faulted southern margin of Siletzia. South of Cape Blanco the Klamath Mountains-Basin and Range block extends east to the Central Nevada Seismic Belt and south to the Sierra Nevada-Great Valley block. The Siletzia block north of Cape Blanco coincides almost exactly with the accreted Siletz terrane. The cluster boundary in the eastern Olympic Peninsula may mark permanent shortening of Siletzia against the Intermountain block.

California, Idaho, Nevada, Oregon, Washington↗
USGS1988

The geometric signature: Quantifying landslide-terrain types from digital elevation models

Topography of various types and scales can be fingerprinted by computer analysis of altitude matrices (digital elevation models, or DEMs). The critical analytic tool is the geometric signature, a set of measures that describes topographic form well enough to distinguish among geomorphically disparate landscapes. Different surficial processes create topography with diagnostic forms that are recognizable in the field. The geometric signature abstracts those forms from contour maps or their DEMs and expresses them numerically. This multivariate characterization enables once-in-tractable problems to be addressed. The measures that constitute a geometric signature express different but complementary attributes of topographic form. Most parameters used here are statistical estimates of central tendency and dispersion for five major categories of terrain geometry; altitude, altitude variance spectrum, slope between slope reversals, and slope and its curvature at fixed slope lengths. As an experimental application of geometric signatures, two mapped terrain types associated with different processes of shallow landsliding in Marin County, California, were distinguished consistently by a 17-variable description of topography from 21??21 DEMs (30-m grid spacing). The small matrix is a statistical window that can be used to scan large DEMs by computer, thus potentially automating the mapping of contrasting terrain types. The two types in Marin County host either (1) slow slides: earth flows and slump-earth flows, or (2) rapid flows: debris avalanches and debris flows. The signature approach should adapt to terrain taxonomy and mapping in other areas, where conditions differ from those in Central California. ?? 1988 International Association for Mathematical Geology.

Mathematical Geology↗
USGS2000

Macroinvertebrate assemblages on woody debris and their relations with environmental variables in the lower Sacramento and San Joaquin River drainages, California

Data from 25 sites were used to evaluate associations between macroinvertebrate assemblages on large woody debris (snags) and environmental variables in the lower San Joaquin and Sacramento River drainages in California as part of the U.S. Geological Survey's National Water Quality Assessment Program. Samples were collected from 1993 to 1995 in the San Joaquin River drainage and in 1996 and 1997 in the Sacramento River drainage. Macroinvertebrate taxa were aggregated to the family (or higher) level of taxonomic organization, resulting in 39 taxa for analyses. Only the 31 most common taxa were used for two-way indicator species analysis (TWINSPAN) and canonical correspondence analysis (CCA). TWINSPAN analysis defined four groups of snag samples on the basis of macroinvertebrate assemblages. Analysis of variance identified differences in environmental and biotic characteristics among the groups. These results combined with the results of CCA indicated that mean dominant substrate type, gradient, specific conductance, water temperature, percentage of the basin in agricultural land use, percentage of the basin in combined agricultural and urban land uses, and elevation were important factors in explaining assemblage structure. Macroinvertebrate assemblages on snags may be useful in family level bioassessments of environmental conditions in valley floor habitats.

Environmental Monitoring and Assessment↗
USGS2007

Cosmogenic 10Be and 36Cl geochronology of offset alluvial fans along the northern Death Valley fault zone: Implications for transient strain in the eastern California shear zone

The northern Death Valley fault zone (NDVFZ) has long been recognized as a major right-lateral strike-slip fault in the eastern California shear zone (ECSZ). However, its geologic slip rate has been difficult to determine. Using high-resolution digital topographic imagery and terrestrial cosmogenic nuclide dating, we present the first geochronologically determined slip rate for the NDVFZ. Our study focuses on the Red Wall Canyon alluvial fan, which exposes clean dextral offsets of seven channels. Analysis of airborne laser swath mapping data indicates ???297 ?? 9 m of right-lateral displacement on the fault system since the late Pleistocene. In situ terrestrial cosmogenic 10Be and 36C1 geochronology was used to date the Red Wall Canyon fan and a second, correlative fan also cut by the fault. Beryllium 10 dates from large cobbles and boulders provide a maximum age of 70 +22/-20 ka for the offset landforms. The minimum age of the alluvial fan deposits based on 36Cl depth profiles is 63 ?? 8 ka. Combining the offset measurement with the cosmogenic 10Be date yields a geologic fault slip rate of 4.2 +1.9/-1.1 mm yr-1, whereas the 36Cl data indicate 4.7 +0.9/-0.6 mm yr-1 of slip. Summing these slip rates with known rates on the Owens Valley, Hunter Mountain, and Stateline faults at similar latitudes suggests a total geologic slip rate across the northern ECSZ of ???8.5 to 10 mm yr-1. This rate is commensurate with the overall geodetic rate and implies that the apparent discrepancy between geologic and geodetic data observed in the Mojave section of the ECSZ does not extend north of the Garlock fault. Although the overall geodetic rates are similar, the best estimates based on geology predict higher strain rates in the eastern part of the ECSZ than to the west, whereas the observed geodetic strain is relatively constant. Copyright 2007 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗
USGS2011

Space geodetic data improve seismic hazard assessment in California: Workshop on incorporating geodetic surface deformation data Into UCERF3; Pomona, California, 1–2 April 2010

A workshop was held to begin scientific consideration of how to incorporate space geodetic constraints on strain rates and fault slip rates into the next generation Uniform California Earthquake Rupture Forecast, version 3 (UCERF3), due to be completed in mid-2012. Principal outcomes of the meeting were (1) an assessment of secure science ready for UCERF3 applications within the next year, and (2) an agenda of new research objectives for the Southern California Earthquake Center (SCEC), the U.S. Geological Survey (USGS), and others in support of UCERF3 and related probabilistic seismic hazard assessments (PSHA). A number of goals potentially achievable within a year were identified, including (1) slip rate and fault locking depth estimates, with uncertainties or ranges, for all major and some minor faults of the extended San Andreas system; (2) strain rate estimates or bounds on rates for selected regions lying off the major faults of the San Andreas system; and (3) corrections or bounds on perturbing effects of postseismic deformation and elastic modulus heterogeneities on the observed Global Positioning System (GPS) velocity field (needed as input to models for estimating fault slip and strain rates in goals 1 and 2 above).

California↗
USGS1978

Comparison of a few recording current meters in San Francisco Bay, CA

A team of research scientists in the U.S. Geological Survey uses San Francisco Bay, California, as an outdoor laboratory to study complicated interactions of physical, chemical, and biological processes which take place in an estuarine environment. A current meter comparison study was conceived because of the need to select a suitable current meter to meet field requirements for current measurements in the Bay. The study took place in south San Francisco Bay, California, in the spring of 1977. An instrument tower which was designed to support instruments free from the conventional mooring line motions was constructed and emplaced in south San Francisco Bay. During a period of two months, four types of recording current meters have been used in the tests. The four types were: (1) Aanderaa, (2) tethered shroud-impeller, (3) drag-inclinometer, and (4) electromagnetic current meters. With the exception of the electromagnetic current meter, one of each type was mounted on the instrument tower, and one of each type was deployed on moorings near the instrument tower. In addition, a wind anemometer and a recording tide gauge were also installed on the tower. This paper discusses the characteristics of each instrument and the accuracy that each instrument can provide when used in an estuarine environment. We pay special attention to our experiences in the field operation with respect to handling of the instruments and to our experiences working up the raw data in the post-deployment data analysis.

California↗
USGS2024

Geology, coastal geomorphology, and soils of eastern Santa Cruz Island (Limuw), Channel Islands National Park, California, USA

This one-day field trip explores northeastern Santa Cruz Island ( Limuw , in native Chumash), a part of Channel Islands National Park, USA. The geomorphology of eastern Santa Cruz Island has been controlled largely by active tectonics and sea-level fluctuations. The bedrock is Miocene volcanic rock overlain by Miocene shale and siltstone. The island has experienced Quaternary uplift, perhaps due to movement along an offshore thrust fault. Smaller faults are exposed in sea cliffs and have displaced Miocene rocks. Superimposed upon island uplift, there have been Quaternary sea-level fluctuations from interglacial-glacial climate changes. Interglacial high-sea stands are recorded as marine terraces. The last major interglacial period, ~120,000 years ago, left only small remnants of marine terraces. Most evidence of this high-sea stand was eroded away in the Holocene. However, a prominent marine terrace is preserved at 75–120 m above sea level. Some fossil mollusks from the deposits of this terrace, probably reworked, have given ages as old as Pliocene, but most yield ages of 2.6–2.0 Ma. The age and elevation of this terrace indicate a very low rate of tectonic uplift, similar to nearby Anacapa Island. A low uplift rate explains the absence or scarcity of younger terraces, including that of the last interglacial period. Low stands of sea (glacial periods) exposed the insular shelf, rich in carbonate skeletal sand. During glacial periods, these sands were entrained by the wind, deposited as dunes on marine terraces, and cemented into eolianite. Clay-rich Vertisols with silt mantles have developed on eolianites and terraces of the island, partly from in situ weathering, but also from inputs of Mojave Desert dust during Santa Ana wind events. This guide includes stops at Scorpion Anchorage, Cavern Point, and Potato Harbor. It provides insights into the bedrock, coastal geomorphology, fossiliferous marine terraces, eolianite, Vertisols, and the three formations on eastern Santa Cruz Island: the Santa Cruz Island Volcanics, the Monterey Formation, and the Potato Harbor Formation.

California↗