Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84Linked to original sources
USGS1973

Barite in Pakistan

Before 1953 almost no barite deposits were known in Pakistan. Discovery of such deposits relatively close to oil fields in northern Pakistan in 1953 led to increased barite production from 1957 to 1961 and to doubling of production in 1962, firmly establishing new industry for the country. During 1962 and 1963, most of the known barite deposits in Pakistan were geologically mapped, and minimum reserves were estimated to be 1,423,000 short tons. The largest single deposit, Ehuzdar, is estimated to contain more than 1,100,000 short tons of barite. Barite has been found in Pakistan principally in the Hazara, Khuzdar, and Las Bela districts. Although several vein deposits contain good quality barite, 90 percent of estimated reserves are in replacement deposits concordant to bedding in sedimentary rocks. Host rocks range in age from Precambrian to Pleistocene, but the periods of barite deposition are probably Jurassic or younger. Some barite concentrated in sandstone may be of detrital origin. In late 1962, demand for barite in Pakistan was estimated at about 8,000 tons annually. Although domestic barite resources exceed this figure, less than 40 percent of demand was being supplied by domestic nines in 1963. Transportation costs and limited production facilities are partly responsible for output, but the lack of quality control is a major obstacle. Producers are not generally familiar with commercial specifications for barite and have net recognized that their products are too impure to be successfully marketed without installing the necessarycontrol procedures of sampling and beneficiation.

Open-File Report↗
USGS2009

Intertonguing of the lower part of the Uinta Formation with the upper part of the Green River Formation in the Piceance Creek Basin during the late stages of Lake Uinta

During most of middle Eocene time, a 1,500-mi 2 area between the Colorado and White Rivers in northwestern Colorado was occupied by the Piceance lobe of Lake Uinta. This initially freshwater lake became increasingly saline throughout its history. Sediments accumulating in the lake produced mostly clay shale, limestone, and dolomite containing varying concentrations of organic matter. At the time of the maximum extent of the lake, the organic-rich Mahogany bed of the Green River Formation was deposited throughout the area. Shortly after its deposition, stream deposits began infilling the lake from the north through a series of contractions interspersed with minor expansions. This fluctuation of the shoreline resulted in the intertonguing of the stream sediments of the lower part of the overlying Uinta Formation with the lacustrine sediments of the upper part of the Green River over a distance of about 40 mi; construction of regional stratigraphic cross sections show the pattern of intertonguing in considerable detail. The data utilized in this study, which covered parts of Rio Blanco, Garfield, and Mesa counties, was derived from (1) geologic mapping of thirty-four 7 ½-minute quadrangles and stratigraphic studies by geologists of the U.S. Geological Survey, and (2) shale-oil assay information from numerous cores. As a result of this previous work and the additional effort involved in the compilation here presented, more than a dozen Green River Formation tongues have been named, some formally, others informally. Middle Eocene strata above the Mahogany bed in the northern part of the study area are dominantly coarse clastics of the Uinta Formation. The sedimentary sequence becomes more calcareous and organic-rich to the south where, in a 400-mi 2 area, a 250 ft-thick sequence of oil shale above the Mahogany bed contains an average of 16 gallons of oil per ton of shale and is estimated to contain 73 billion barrels of oil.

Scientific Investigations Report↗
USGS1933

Metalliferous deposits of the greater Helena mining region, Montana

The ore deposits described in this bulletin are distributed through a region of about 3,000 square miles surrounding the city of Helena, Mont. In general the surface of this region is mountainous, but it includes several large intermontane valleys. Large areas in the northern and eastern parts of the region sire underlain by sedimentary rocks of the Algonkian Belt series, and on the northeast and southwest the Belt rocks are overlain without any noticeable angular unconformity by Paleozoic and Mesozoic beds. Oligocene, Miocene, and possibly Pliocene sediments, composed chiefly of volcanic ash and land waste of local origin, occupy large areas in the intermontane valleys and lie unconformably upon Cretaceous and older rocks. A thin veneer of Pleistocene and Recent alluvium generally overspreads the Tertiary. In the extreme northern part of the region are large deposits of glacial drift that represent two stages of the Pleistocene. The principal igneous body of the region is the northern part of the early Tertiary or late Cretaceous Boulder batholitb of quartz monzonite. The main exposure of this body occupies an area of nearly 1,200 square miles and extends southward beyond the limits of the particular region considered. Smaller areas of similar rocks are clustered around this exposure. Most of the exposures probably represent bodies that are connected in depth to form a single mass. The late Cretaceous and older sedimentary rocks are involved in a series of northwestward-trending folds. Along the east side of the region overthrust faults related to the great Lewis overthrust of Glacier National Park cause Belt rocks to overlie rocks of Paleozoic and Mesozoic ages. Large normal faults occur near Marysville and faults of moderate displacement near Helena. The Tertiary beds are slightly deformed by folds and faults that are unrelated to the structure of the older rock. The geologic history of the region includes two contrasting periods, the earlier of which was characterized by the accumulation of marine sediments and the later by mountain building and erosion. The later period began with folding and elevation in late Cretaceous or early Eocene time, followed by overthrust faulting and the intrusion of the Boulder batholith. Next, there ensued a period of crustal stability, during which erosion reduced the region to a surface of low relief and cut away at least 10,000 feet of strata in the area north of Helena. In Oligocene, Miocene, and Pliocene (?) time sediments composed of land waste and volcanic ash were deposited, and this event was followed by warping and faulting that elevated the present mountains. During Pliocene and Pleistocene time the mountains were maturely dissected, and in middle and late Pleistocene time local glaciers formed in the higher mountains and large valley glaciers invaded the extreme northern part of the region. The ore deposits include lodes and placers that have yielded gold, silver, lead, copper, and zinc to a value of at least $176,860,000. The placers were formed mostly during interglacial stages of the Pleistocene. They have been almost entirely exhausted. Most of the lodes are classified as regards age in two groups, an older and a younger. The older lodes are related in origin to the Boulder batholith or some of the neighboring intrusive granitic bodies and were probably formed during early Eocene time. The younger lodes were formed after dacite of probable Miocene age was erupted. They are possibly related in origin to some unexposed intrusive granitic rock. For convenience in description the region is divided into three parts districts north of Helena, districts in the Belt Mountains, and districts south of Helena. The districts north of Helena include a 50-mile stretch of the Continental Divide that forms a broad ridge surmounted with considerable areas of flat or gently sloping surface at a general altitude of 7,000 feet. Narrow valleys 1,000 to 2,000 feet deep are cut into this surface and lead out to the neighboring wide intermontane valleys. The area is underlain mostly by shale, sandstone, and limestone of the upper part of the Belt series. Beds of Paleozoic and Mesozoic age occur south of the Belt area and extend from Helena west and northwest. The igneous rocks of the area include diorite and gabbro sills and dikes of probable Cretaceous age, extrusive andesite that is probably Oligocene or Miocene, and stocks of quartz monzonite, granodiorite, and quartz diorite, probably of Oligocene or Miocene age. The ore deposits of the northern districts are chiefly lodes that are valuable for gold and silver but contain some lead and copper. In the Ophir district bodies of gold and silver ore occur mainly in limestone near a body of quartz monzonite. In the Scratchgravel Hills and Grass Valley districts veins of gold quartz and veins containing lead-silver ore occur in quartz monzonite and in the adjoining metamorphic rocks. In the Austin district lodes containing gold; silver, lead, and copper are found in limestone near intrusive quartz monzonite. An unusual mineral in one of these lodes is corkite, a hydrous sulphate of lead containing arsenic. A small stock of quartz diorite in the Marysville district has invaded and domed Belt rocks. Marginal and radial fractures formed during the cooling and contraction of the igneous body became the receptacles of gold and silver veins, one of which, the Drumlummon, has produced $16,000,000. The veins filled open fractures and are characterized by a gangue of platy calcite and quartz. Lodes in Towsley Gulch in the western part of the district contain lead in addition to gold. In the Gould district a small stock of the granodiorite has invaded the Belt rocks and caused the deposition of veins similar to those near Marysville. In the Heddleston district lodes valuable for gold, silver, lead, and copper occur in Belt sedimentary rocks and diorite, some of them associated with porphyry dikes. In the Wolf Creek district veins in Belt rocks have produced copper ore composed mainly of chalcopyrite or chalcopyrite and tennantite accompanied by pyrite and a gangue of quartz and barite. Placer deposits along the western slope of the Belt Mountains have produced $17,500,000 in gold. Sapphires were formerly obtained from some of these deposits. The central part of the Belt Mountains is a plateaulike area considered to be the remnant of a surface produced by erosion during Tertiary time. This surface was elevated and has been deeply trenched by narrow, transverse valleys that are bordered with remnants of low terraces in which most of the placer deposits occur. Most of the western slope of the mountains is underlain by sedimentary rocks of the Belt series. At the foot of the mountains these give place to Paleozoic rocks, and these in turn are overlain unconformably in Townsend Valley by Tertiary and later deposits. The main structural feature is a great arch called the York anticline, which occupies most of the west side of the mountains. At the west foot of the mountains this fold is bordered by a series of small synclines that are tightly squeezed, faulted, and overturned as a result of pressure exerted from the west or southwest along a fracture described as the El Dorado overthrust On another fracture called1 the Scout Camp overthrust the Belt rocks composing the western slope of the mountains are thrust eastward over Paleozoic beds. Both faults are regarded as branches of the Lewis overthrust of Glacier Park. Igneous rocks that probably range in age from early Eocene to Pleistocene are widely but sparingly distributed.' They include sills and dikes of quartz dibrite, porphyry dikes, small stocks of quartz monzonite and quartz diorite, and surface flows of andesite and basalt. The deposits in the Belt Mountains that are of most interest at the present time are lodes that are chiefly valuable for gold. Most of them are found in the vicinity of York and Confederate Gulch. Nearly all are small quartz veins formed along fractures in diorite dikes and stocks or on bedding planes in the adjoining Belt sedimentary rocks. An exception is the Golden Messenger, a replacement deposit of large size but low grade, formed along fractures in a quartz diorite dike. Other veins in the same dike belong to the rather uncommon class called ladder veins. Many of the small veins contain shoots and bunches of rich ore in their upper parts. Downward- enrichment in gold is indicated to have occurred in some of the veins near York that lie below an old erosion surface. Elsewhere the origin of the placer deposits from erosion o'f the lodes during interglacial stages of the Pleistocene is indicated. Lodes containing chalcopyrite occupy tension fractures in the Belt shales that were produced by lateral movements of the mass composing the mountain front. In the districts south of Helena mining began with the discovery, on July 14, 1864, of rich placer deposits at the present site of the city of Helena, on Last Chance Creek. Since then the placer and lode deposits of these districts have produced metals worth $130,000,000 or more, of which about one-third was gold, the remainder chiefly lead and zinc. Sedimentary rocks ranging in age from Algonkian to Cretaceous underlie parts of the region, and other parts are underlain by a bedded series of andesite and latite tuffs, breccias, and flows. These rocks have been intruded and severely metamorphosed by the quartz monzonite of the Boulder batholith, the exposures of which occupy a large area. Rocks later than the intrusion of the batholith are chiefly a series of late Tertiary dacites and rhyolites. The placers of the southern districts have been almost entirely worked out. The lodes have yielded metals worth $111,600,000, but many of them are still productive. They include veins and contact-metamorphic deposits. Some of the contact deposits contain copper ore, and others contain iron ore valuable for fluxing. The veins are of two ages. The older veins have yielded most of the metallic production of the region. Their ores in general are heavy sulphide aggregates composed mainly of galena, sphalerite, and pyrite. Arsenopyrite is generally present; tetrahedrite and chalcopyrite are less common. Many of the veins are distinguished from the usual type of ore body by the occurrence of abundant tourmaline. The, metals produced are chiefly silver, lead, gold, and zinc, with some copper. The younger veins are essentially precious-metal deposits. They are mainly fissure veins but include some disseminated deposits of low grade. They are widely distributed and include several productive bodies. A distinguishing feature is the occurrence in the gangue of cryptocrystalline quartz and lamellar calcite. A dominant eastward trend of the vein fractures of the older group indicates them to be tension cracks in the crust block lying west of the Lewis overthrust that were produced by stretching in a direction at right angles to the thrust.

Montana↗
USGS2020

Nutrients and warming interact to force mountain lakes into unprecedented ecological state

While deposition of reactive nitrogen (N) in the 20th century has been strongly linked to changes in diatom assemblages in high-elevation lakes, pronounced and contemporaneous changes in other algal groups suggest additional drivers. We explored the origin and magnitude of changes in two mountain lakes from the end of the Little Ice Age at ca. 1850, to ca. 2010, using lake sediments. We found dramatic changes in algal community abundance and composition. While diatoms remain the most abundant photosynthetic organisms, concentrations of diatom pigments decreased while pigments representing chlorophytes increased 200-300% since ca. 1950 and total algal biomass more than doubled. Some algal changes began ca. 1900, but shifts in most sedimentary proxies accelerated ca. 1950 commensurate with many human-caused changes to the Earth system. In addition to N deposition, aeolian dust deposition may have contributed phosphorus. Strong increases in summer air and surface water temperatures since 1983 have direct and indirect consequences for high elevation ecosystems. Such warming could have directly enhanced nutrient use and primary production. Indirect consequences of warming include enhanced leaching of nutrients from geologic and cryosphere sources, particularly as glaciers ablate. While we infer causal mechanisms, changes in primary producer communities appear to be without historical precedent and are commensurate with the post-1950 acceleration of global change.

Proceedings of the Royal Society B: Biological Sci↗
USGS1986

Dating the upper Cenozoic sediments in Fisher Valley, southeastern Utah (USA)

More than 140 m of upper Cenozoic basin-fill sediments were deposited and then deformed in Fisher Valley between about 2.5 and 0.25 m.y. ago, in response to uplift of the adjacent Onion Creek salt diapir. In addition to these basin-fill sediments, minor amounts of eolian and fluvial sand were deposited in Holocene time. The sediments, whose relative ages are known from the stratigraphy, are predominantly sandy, second-cycle red beds derived from nearby Mesozoic rocks; most were deposited in a vertical sequence, filling a sedimentary basin now exposed by fluvial dissection. We have applied a variety of established and experimental dating methods to the sediments in Fisher Valley to establish their age and to provide time control for the recent history of the Onion Creek salt diapir.

Geological Society of America Bulletin↗
USGS2013

U-Pb ages of detrital zircons from the Tertiary Mississippi River delta plain in central Louisiana: Insights into sediment provenance

The sources of the tremendous amount of Cenozoic siliciclastic sediment deposited in the Gulf of Mexico region remain debated because of a lack of definitive provenance-identifying characteristics. In an effort to build on prior provenance analysis, we present 101–160 single-grain detrital zircon U-Pb ages for each of 10 outcrop samples from Upper Paleocene to Upper Miocene sandstones from a ∼10,000 km2 swath of central Louisiana corresponding to the ancient Mississippi River Delta, the largest Cenozoic depocenter in the northern Gulf of Mexico region. Sample depositional age control is derived from biostratigraphy and/or regional lithostratigraphic correlation. U-Pb ages in each of the samples range from Cenozoic to Archean, and correspond to the ages of various geologic terranes that underlie the modern Mississippi River drainage basin. However, the prominence of various age distributions changes systematically through the Cenozoic stratigraphy, and pronounced shifts in the abundance of certain age distributions between stratal packages appear to be correlated to shifts in heavy mineral assemblages recorded across the northern Gulf of Mexico coastal plain. Comparison of coastal plain detrital zircon age distributions to age distributions from North American sedimentary cover and the ages of major North American crystalline basement rocks, aided by a sediment mixing model, illuminates the provenance of each of the stratal packages, and suggests that (1) the Mississippi River catchment has resembled its present configuration, at least in the east-west dimension, for much, if not all, of the Cenozoic, and (2) depositional episodes on the Louisiana coastal plain characterized by high sediment supply also corresponded to high proportions of sediment sourcing from the Sevier-Laramide region of the interior western United States. Sediment supply to the Louisiana coastal plain by the paleo–Mississippi River has generally been high during the Cenozoic, except for an anomalous low during the Middle Eocene, when the abundance of sediment derived from the Rocky Mountain region decreased dramatically relative to sediment derived from the Appalachian region.

Louisiana↗
USGS2001

Remnant colloform pyrite at the haile gold deposit, South Carolina: A textural key to genesis

Auriferous iron sulfide-bearing deposits of the Carolina slate belt have distinctive mineralogical and textural features-traits that provide a basis to construct models of ore deposition. Our identification of paragenetically early types of pyrite, especially remnant colloform, crustiform, and layered growth textures of pyrite containing electrum and pyrrhotite, establishes unequivocally that gold mineralization was coeval with deposition of host rocks and not solely related to Paleozoic tectonic events. Ore horizons at the Haile deposit, South Carolina, contain many remnants of early pyrite: (1) fine-grained cubic pyrite disseminated along bedding; (2) fine- grained spongy, rounded masses of pyrite that may envelop or drape over pyrite cubes; (3) fragments of botryoidally and crustiform layered pyrite, and (4) pyritic infilling of vesicles and pumice. Detailed mineral chemistry by petrography, microprobe, SEM, and EDS analysis of replaced pumice and colloform structures containing both arsenic compositional banding and electrum points to coeval deposition of gold and the volcanic host rocks and, thus, confirms a syngenetic origin for the gold deposits. Early pyrite textures are present in other major deposits of the Carolina slate belt, such as Ridgeway and Barite Hill, and these provide strong evidence for models whereby the sulfide ores formed prior to tectonism. The role of Paleozoic metamorphism was to remobilize and concentrate gold and other minerals in structurally prepared sites. Recognizing the significance of paragenetically early pyrite and gold textures can play an important role in distinguishing sulfide ores that form in volcanic and sedimentary environments from those formed solely by metamorphic processes. Exploration strategies applied to the Carolina slate belt and correlative rocks in the eastern United States in the Avalonian basement will benefit from using syngenetic models for gold mineralization.

Economic Geology↗
USGS1947

The sangdong tungsten deposit, southern Korea

The Sangdong deposit consists of metamorphosed lenticular beds in a sequence of gently dipping argillaceous sedimentary rocks. It is believed that scheelite mineralization was simultaneous with metamorphism, followed by deposition of wolframite during a later hydrothermal phase. The reserve of ore is estimated to be 3,000,000 tons, containing 51,000 tons of WO (sub 3.)

southern Korea↗
USGS1960

Engineering geology bearing on harbor site selection along the Gulf of Alaska from Point Whitshed to Cape Yakataga, Alaska

An analysis of the known geologic factors in the Point Whitshed-Cape Yakataga area, Alaska, indicates that the most suitable location for a harbor to be excavated by nuclear-device techniques is a section of coastline from Point Martin to the town of Katalla. Three sites selected in the Point Martin-Katalla area are indicated on plates 5 and 9. Site 1 at Point Martin is underlain by terrace gravel overlying sedimentary rocks of Tertiary age. The site is protected from south- east storms but not from southwest storms. Longshore transport of sediments is to the west during high tides and either lacking or to the east during low tides. The 60-foot offshore contour is within 1.5 miles of the site and the 30-foot offshore contour is within 0.4 mile. Site 2 at Palm Point is underlain by beach gravel, terrace gravel, and muskeg deposits that overlie Tertiary sedimentary rocks. The site is protected from southwest storms but exposed to southeast storms, which are the major ones in the Point Whitshed-Cape Yakataga area. The beach at this site is being eroded actively and the sediments are carried offshore by waves that break at right angles to the beach. The 60-foot offshore contour lies within 2 miles of the site area; the 30-foot offshore contour is within 0.3 miles. Site 3 at the town of Katalla is underlain by beach and terrace deposits overlying Tertiary sedimentary rocks. This site offers better protection than either of the other two from southeast and southwest storms. Longshore transport along a spit east of the site has filled the Katalla River to within 3 feet of the surface to mean low tide. Dredging requirements at this site would be much greater than at sites 1 and 2. The 60-foot offshore contour is within 3.5 miles of Katalla and the 50-foot contour within 1 mile.

Open-File Report↗
USGS2008

Estimation of bedrock depth using the horizontal‐to‐vertical (H/V) ambient‐noise seismic method

Estimating sediment thickness and the geometry of the bedrock surface is a key component of many hydrogeologic studies. The horizontal‐to‐vertical (H/V) ambient‐noise seismic method is a novel, non‐invasive technique that can be used to rapidly estimate the depth to bedrock. The H/V method uses a single, broad‐band three‐component seismometer to record ambient seismic noise. The ratio of the averaged horizontal‐to‐vertical frequency spectrum is used to determine the fundamental site resonance frequency, which can be interpreted using regression equations to estimate sediment thickness and depth to bedrock. The U.S. Geological Survey used the H/V seismic method during fall 2007 at 11 sites in Cape Cod, Massachusetts, and 13 sites in eastern Nebraska. In Cape Cod, H/V measurements were acquired along a 60‐kilometer (km) transect between Chatham and Provincetown, where glacial sediments overlie metamorphic rock. In Nebraska, H/V measurements were acquired along approximately 11‐ and 14‐km transects near Firth and Oakland, respectively, where glacial sediments overlie weathered sedimentary rock. The ambient‐noise seismic data from Cape Cod produced clear, easily identified resonance frequency peaks. The interpreted depth and geometry of the bedrock surface correlate well with boring data and previously published seismic refraction surveys. Conversely, the ambient‐noise seismic data from eastern Nebraska produced subtle resonance frequency peaks, and correlation of the interpreted bedrock surface with bedrock depths from borings is poor, which may indicate a low acoustic impedance contrast between the weathered sedimentary rock and overlying sediments and/or the effect of wind noise on the seismic records. Our results indicate the H/V ambient‐noise seismic method can be used effectively to estimate the depth to rock where there is a significant acoustic impedance contrast between the sediments and underlying rock. However, effective use of the method is challenging in the presence of gradational contacts such as gradational weathering or cementation. Further work is needed to optimize interpretation of resonance frequencies in the presence of extreme wind noise. In addition, local estimates of bedrock depth likely could be improved through development of regional or study‐area‐specific regression equations relating resonance frequency to bedrock depth.

Conference Paper↗
USGS1988

Physiography of the western United States Exclusive Economic Zone

GLORIA (Geologic Long-Range Inclined Asdic) sidescan sonar images were collected over the entire Exclusive Economic Zone (EEZ) west of the conterminous United States. The continuous, overlapping, swath-mapping technique provides, for the first time, a reconnaissance plan view off the entire sea floor from the edge of the continental shelf to 370 km from shore. The mid-ocean ridges, transform faults, seamount provinces, and sediment fans that dominate this region of the EEZ are seen in detail, and many features never before mapped in this region, such as canyons, seamounts, and meandering channels, have been located. Marked differences are apparent in the morphology of the continental slope and in sedimentary features both on the slope and in the deep ocean. Anticlinal ridges and diapirs crossed by large submarine canyon systems are clearly defined on the continental slope north of the Mendocino Fracture Zone. In contrast, the slope south of the fracture zone is incised by a dense network of smaller scale canyons and only a few large canyon systems. The first-order causes of these differences are related to differences in tectonic setting between the subduction-dominated margin north of Cape Mendocino and the strike-slip-dominated margin to the south.

Geology↗
USGS2016

Geologic framework and hydrostratigraphy of the Edwards and Trinity aquifers within northern Bexar and Comal Counties, Texas

During 2014–16, the U.S. Geological Survey, in cooperation with the Edwards Aquifer Authority, documented the geologic framework and hydrostratigraphy of the Edwards and Trinity aquifers within northern Bexar and Comal Counties, Texas. The Edwards and Trinity aquifers are major sources of water for agriculture, industry, and urban and rural communities in south-central Texas. Both the Edwards and Trinity are classified as major aquifers by the State of Texas. The purpose of this report is to present the geologic framework and hydrostratigraphy of the Edwards and Trinity aquifers within northern Bexar and Comal Counties, Tex. The report includes a detailed 1:24,000-scale hydrostratigraphic map, names, and descriptions of the geology and hydrostratigraphic units (HSUs) in the study area. The scope of the report is focused on geologic framework and hydrostratigraphy of the outcrops and hydrostratigraphy of the Edwards and Trinity aquifers within northern Bexar and Comal Counties, Tex. In addition, parts of the adjacent upper confining unit to the Edwards aquifer are included. The study area, approximately 866 square miles, is within the outcrops of the Edwards and Trinity aquifers and overlying confining units (Washita, Eagle Ford, Austin, and Taylor Groups) in northern Bexar and Comal Counties, Tex. The rocks within the study area are sedimentary and range in age from Early to Late Cretaceous. The Miocene-age Balcones fault zone is the primary structural feature within the study area. The fault zone is an extensional system of faults that generally trends southwest to northeast in south-central Texas. The faults have normal throw, are en echelon, and are mostly downthrown to the southeast. The Early Cretaceous Edwards Group rocks were deposited in an open marine to supratidal flats environment during two marine transgressions. The Edwards Group is composed of the Kainer and Person Formations. Following tectonic uplift, subaerial exposure, and erosion near the end of Early Cretaceous time, the area of present-day south-central Texas was again submerged during the Late Cretaceous by a marine transgression resulting in deposition of the Georgetown Formation of the Washita Group. The Early Cretaceous Edwards Group, which overlies the Trinity Group, is composed of mudstone to boundstone, dolomitic limestone, argillaceous limestone, evaporite, shale, and chert. The Kainer Formation is subdivided into (bottom to top) the basal nodular, dolomitic, Kirschberg Evaporite, and grainstone members. The Person Formation is subdivided into (bottom to top) the regional dense, leached and collapsed (undivided), and cyclic and marine (undivided) members. Hydrostratigraphically the rocks exposed in the study area represent a section of the upper confining unit to the Edwards aquifer, the Edwards aquifer, the upper zone of the Trinity aquifer, and the middle zone of the Trinity aquifer. The Pecan Gap Formation (Taylor Group), Austin Group, Eagle Ford Group, Buda Limestone, and Del Rio Clay are generally considered to be the upper confining unit to the Edwards aquifer. The Edwards aquifer was subdivided into HSUs I to VIII. The Georgetown Formation of the Washita Group contains HSU I. The Person Formation of the Edwards Group contains HSUs II (cyclic and marine members [Kpcm], undivided), III (leached and collapsed members [Kplc,] undivided), and IV (regional dense member [Kprd]), and the Kainer Formation of the Edwards Group contains HSUs V (grainstone member [Kkg]), VI (Kirschberg Evaporite Member [Kkke]), VII (dolomitic member [Kkd]), and VIII (basal nodular member [Kkbn]). The Trinity aquifer is separated into upper, middle, and lower aquifer units (hereinafter referred to as “zones”). The upper zone of the Trinity aquifer is in the upper member of the Glen Rose Limestone. The middle zone of the Trinity aquifer is formed in the lower member of the Glen Rose Limestone, Hensell Sand, and Cow Creek Limestone. The regionally extensive Hammett Shale forms a confining unit between the middle and lower zones of the Trinity aquifer. The lower zone of the Trinity aquifer consists of the Sligo and Hosston Formations, which do not crop out in the study area. The upper zone of the Trinity aquifer is subdivided into five informal HSUs (top to bottom): cavernous, Camp Bullis, upper evaporite, fossiliferous, and lower evaporite. The middle zone of the Trinity aquifer is composed of the (top to bottom) Bulverde, Little Blanco, Twin Sisters, Doeppenschmidt, Rust, Honey Creek, Hensell, and Cow Creek HSUs. The underlying Hammett HSU is a regional confining unit between the middle and lower zones of the Trinity aquifer. The lower zone of the Trinity aquifer is not exposed in the study area. Groundwater recharge and flow paths in the study area are influenced not only by the hydrostratigraphic characteristics of the individual HSUs but also by faults and fractures and geologic structure. Faulting associated with the Balcones fault zone (1) might affect groundwater flow paths by forming a barrier to flow that results in water moving parallel to the fault plane, (2) might affect groundwater flow paths by increasing flow across the fault because of fracturing and juxtaposing porous and permeable units, or (3) might have no effect on the groundwater flow paths. The hydrologic connection between the Edwards and Trinity aquifers and the various HSUs is complex. The complexity of the aquifer system is a combination of the original depositional history, bioturbation, primary and secondary porosity, diagenesis, and fracturing of the area from faulting. All of these factors have resulted in development of modified porosity, permeability, and transmissivity within and between the aquifers. Faulting produced highly fractured areas that have allowed for rapid infiltration of water and subsequently formed solutionally enhanced fractures, bedding planes, channels, and caves that are highly permeable and transmissive. The juxtaposition resulting from faulting has resulted in areas of interconnectedness between the Edwards and Trinity aquifers and the various HSUs that form the aquifers.

Texas↗
USGS2009

Geological controls on soil parent material geochemistry along a northern Manitoba-North Dakota transect

As a pilot study for mapping the geochemistry of North American soils, samples were collected along two continental transects extending east–west from Virginia to California, and north–south from northern Manitoba to the US–Mexican border and subjected to geochemical and mineralogical analyses. For the northern Manitoba–North Dakota segment of the north–south transect, X-ray diffraction analysis and bivariate relations indicate that geochemical properties of soil parent materials may be interpreted in terms of minerals derived from Shield and clastic sedimentary bedrock, and carbonate sedimentary bedrock terranes. The elements Cu, Zn, Ni, Cr and Ti occur primarily in silicate minerals decomposed by aqua regia, likely phyllosilicates, that preferentially concentrate in clay-sized fractions; Cr and Ti also occur in minerals decomposed only by stronger acid. Physical glacial processes affecting the distribution and concentration of carbonate minerals are significant controls on the variation of trace metal background concentrations.

Applied Geochemistry↗
USGS1960

The chief oxide-burgin area discoveries, East Tintic district, Utah; A case history

In 1955 exploration for base and precious metals was undertaken by Bear Creek Mining Company immediately north of the Main Tintic district , Utah . During the course of this work Bear Creek became interested in the East Tintic district , primarily as a result of the activities of the U.S. Geological Survey in that area . Data published on the East Tintic district by the Survey and others were studied and map data made available from various mining companies were compiled. Preliminary economic studies were made to determine the present day value of the type of ore body discovered previously in the district . Encouraging results from these investigations led to the selection of specific targets for exploration. Recommendations for a project program were made and approved. Negotiations were successfully concluded in mid-1956 for a unit lease agreement on lands in the East Tintic district owned by the Tintic Standard and Chief Consolidated mining companies and their subsidiaries. Of the targets selected for exploration, the Chief Oxide area seemed to be one of the most prominent. Our preliminary work in the Chief Oxide area corroborated the findings of the U.S. Geological Survey described in Part I of this paper. After careful consideration it was decided to gamble the cost of an exploration shaft in this area for the purpose of providing an underground drilling platform. We also hoped by means of underground workings to establish the existence and nature of the postulated fault. A limited amount of surface drilling was done prior to shaft sinking in order to locate a shaft site and also to obtain additional information of subvolcanic structure and alteration. Underground exploration in the Chief Oxide area was started in January, 1957. The Burgin shaft was sunk to a depth of 1,100 feet and by August, 1959, lateral development on the 1050 level totaled 4,721 feet and underground diamond drilling totaled 15,480 feet. Results of the work done to date are as follows: ( a ) Identification of the sedimentary rock section and an interpretation of the structure in the Burgin mine area . (b) Discovery by penetration of the previously postulated East Tintic thrust fault. (c) Discovery of large zones of manganese oxides and carbonates, which were found to be closely related to silver-lead-zinc mineralization. (d) Discovery of ore-grade lead-zinc mineralization within the footwall rocks of the East Tintic thrust. (e) Discovery of high-grade silver-lead ore within the thrust zone. Insofar as ore localization is concerned the most important structural feature in the Burgin mine area is the East Tintic thrust fault- a fact that opens up new ore potential over a large part of the East Tintic district not previously explored. Although the discoveries to date must be attributed essentially to the application of geology to exploration, the tools of geochemical prospecting and geophysics were also used, and the geochemical work, in particular, was found to be a definite aid in the selection of areas for further exploration.

Utah↗
USGS1949

Terrain diagrams of the Philippine Islands

This paper presents four terrain diagrams, on a scale of 1:1,000,000, which cover all the Philippine Islands. The diagrams were prepared during World War II by the Military Geology Unit of the U. S. Geological Survey for the Chief of Engineers, U. S. Army. Terrain features shown on the diagrams owe their individuality to the nature of the rock formations and the tectonics. Mountain areas are made up of pre-Tertiary basement rocks, and of Tertiary and Quaternary volcanics; Tertiary and Quaternary sediments from the lowland areas. The mountain areas of basement rocks are geanticlines or horsts, and the lowland areas of Tertiary sedimentary rocks are downwarps. A striking tectonic feature, which has strongly influenced the terrain, is the Philippine fault zone, a belt of dislocation which extends southeast from Luzon to Mindanao.

Palawan↗
USGS2014

Three-dimensional distribution of igneous rocks near the Pebble porphyry Cu-Au-Mo deposit in southwestern Alaska: constraints from regional-scale aeromagnetic data

Aeromagnetic data helped us to understand the 3D distribution of plutonic rocks near the Pebble porphyry copper deposit in southwestern Alaska, USA. Magnetic susceptibility measurements showed that rocks in the Pebble district are more magnetic than rocks of comparable compositions in the Pike Creek–Stuyahok Hills volcano-plutonic complex. The reduced-to-pole transformation of the aeromagnetic data demonstrated that the older rocks in the Pebble district produce strong magnetic anomaly highs. The tilt derivative transformation highlighted northeast-trending lineaments attributed to Tertiary volcanic rocks. Multiscale edge detection delineated near-surface magnetic sources that are mostly outward dipping and coalesce at depth in the Pebble district. The total horizontal gradient of the 10-km upward-continued magnetic data showed an oval, deep magnetic contact along which porphyry deposits occur. Forward and inverse magnetic modeling showed that the magnetic rocks in the Pebble district extend to depths greater than 9 km. Magnetic inversion was constrained by a near-surface, 3D geologic model that is attributed with measured magnetic susceptibilities from various rock types in the region. The inversion results indicated that several near-surface magnetic sources with moderate susceptibilities converge with depth into magnetic bodies with higher susceptibilities. This deep magnetic source appeared to rise toward the surface in several areas. An isosurface value of 0.02 SI was used to depict the magnetic contact between outcropping granodiorite and nonmagnetic sedimentary host rocks. The contact was shown to be outward dipping. At depths around 5 km, nearly the entire model exceeded the isosurface value indicating the limits of nonmagnetic host material. The inversion results showed the presence of a relatively deep, northeast-trending magnetic low that parallels lineaments mapped by the tilt derivative. This deep low represents a strand of the Lake Clark fault.

Alaska↗
USGS2013

ARRA-funded V S30 measurements using multi-technique approach at strong-motion stations in California and central-eastern United States

Funded by the 2009 American Recovery and Reinvestment Act (ARRA), we conducted geophysical site characterizations at 191 strong-motion stations: 187 in California and 4 in the Central-Eastern United States (CEUS). The geophysical methods used at each site included passive and active surface-wave and body-wave techniques. Multiple techniques were used at most sites, with the goal of robustly determining VS (shear-wave velocity) profiles and V S30 (the time-averaged shear-wave velocity in the upper 30 meters depth). These techniques included: horizontal-to-vertical spectral ratio (HVSR), two-dimensional (2-D) array microtremor (AM), refraction microtremor (ReMi™), spectral analysis of surface wave (SASW), multi-channel analysis of surface waves (Rayleigh wave: MAS R W; and Love wave: MAS L W), and compressional- and shear-wave refraction. Of the selected sites, 47 percent have crystalline, volcanic, or sedimentary rock at the surface or at relatively shallow depth, and 53 percent are of Quaternary sediments located in either rural or urban environments. Calculated values of VS30 span almost the full range of the National Earthquake Hazards Reduction Program (NEHRP) Site Classes, from D (stiff soils) to B (rock). The NEHRP Site Classes based on V S30 range from being consistent with the Class expected from analysis of surficial geology, to being one or two Site Classes below expected. In a few cases where differences between the observed and expected Site Class occurred, it was the consequence of inaccurate or coarse geologic mapping, as well as considerable degradation of the near-surface rock. Additionally, several sites mapped as rock have Site Class D (stiff soil) velocities, which is due to the extensive weathering of the surficial rock.

California↗
USGS2014

Hydrogeologic framework and groundwater/surface-water interactions of the South Fork Nooksack River Basin, northwestern Washington

A hydrogeologic framework of the South Fork (SF) Nooksack River Basin in northwestern Washington was developed and hydrologic data were collected to characterize the groundwater-flow system and its interaction with surface‑water features. In addition to domestic, agricultural, and commercial uses of groundwater within the SF Nooksack River Basin, groundwater has the potential to provide ecological benefits by maintaining late-summer streamflows and buffering stream temperatures. Cold-water refugia, created and maintained in part by groundwater, have been identified by water-resource managers as key elements to restore the health and viability of threatened salmonids in the SF Nooksack River. The SF Nooksack River drains a 183-square mile area of the North Cascades and the Puget Lowland underlain by unconsolidated glacial and alluvial sediments deposited over older sedimentary, metamorphic, and igneous bedrock. The primary aquifer that interacts with the SF Nooksack River was mapped within unconsolidated glacial outwash and alluvial sediment. The lower extent of this unit is bounded by bedrock and fine-grained, poorly sorted unconsolidated glaciomarine and glaciolacustrine sediments. In places, these deposits overlie and confine an aquifer within older glacial sediments. The extent and thickness of the hydrogeologic units were assembled from mapped geologic units and lithostratigraphic logs of field-inventoried wells. Generalized groundwater-flow directions within the surficial aquifer were interpreted from groundwater levels measured in August 2012; and groundwater seepage gains and losses to the SF Nooksack River were calculated from synoptic streamflow measurements made in the SF Nooksack River and its tributaries in September 2012. A subset of the field-inventoried wells was measured at a monthly interval to determine seasonal fluctuations in groundwater levels during water year 2013. Taken together, these data provide the foundation for a future groundwater-flow model of the SF Nooksack River Basin that may be used to investigate the potential effects of future climate change, land use, and groundwater pumping on water resources in the study area. Site-specific hydrologic data, including time series of longitudinal temperature profiles measured with a fiber-optic distributed temperature sensor and continuous monitoring of stream stage and water levels measured in wells in adjacent wetlands and aquifers, also were measured to characterize the interaction among the SF Nooksack River, surficial aquifers, and riparian wetlands.

Washington↗