Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Cells”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83Linked to original sources

Comparison of in vitro growth characteristics of ten isolates of infectious hematopoietic necrosis virus

Ten isolates of infectious haematopoietic necrosis from salmonid fishes of different locations on the West Coast of North America from California to Alaska were compared by plaque size, single-step growth curves at 15 and 18 °C, rate of appearance of cytopathic effects in cell cultures, and growth over a range of temperatures. All isolates were distinguishable on the basis of each growth characteristic examined. The CO isolate from the Sacramento River drainage of California was the most singular of the 10 because of its diminutive plaque size and sensitivity to slightly elevated temperatures. The mean plaque diameter of the l0 isolates increased as the latitude of the geographic source of the isolate increased. Although the maximum titre obtained by all isolates was depressed at temperatures above approximately 18 °C, half of the isolates were not inhibited by temperatures as low as 0.5 °C. t.

Journal of General Virology↗

Distribution and variation of NV genes in fish rhabdoviruses

The fish rhabdovirus infectious haematopoietic necrosis virus (IHNV) contains a non-virion (NV) gene between the glycoprotein (G) and polymerase (L) genes on its RNA genome. The present study investigated three other fish rhabdovirus genomes and found that the NV gene of hirame rhabdovirus is closely related to the NV of IHNV, whereas the viral haemorrhagic septicemia NV gene showed evidence of significant divergence. Most importantly, spring viraemia of carp virus, the only vesiculovirus-like fish rhabdovirus examined, did not have an NV gene at its genomic RNA G-L junction. These results suggest that the presence of an NV gene is characteristic of the unassigned fish rhabdovirus subgroup previously classified as lyssaviruses, and that the NV gene is not essential for replication in fish cells per se, since it is absent in a vesiculovirus-like fish rhabdovirus.

Journal of General Virology↗

Deferrisoma paleochoriense sp. nov., a thermophilic, iron(III)-reducing bacterium from a shallow-water hydrothermal vent in the Mediterranean Sea

A novel thermophilic, anaerobic, mixotrophic bacterium, designated strain MAG-PB1 T , was isolated from a shallow-water hydrothermal vent system in Palaeochori Bay off the coast of the island of Milos, Greece. The cells were Gram-negative, rugose, short rods, approximately 1.0 μm long and 0.5 μm wide. Strain MAG-PB1 T grew at 30–70 °C (optimum 60 °C), 0–50 g NaCl l − 1 (optimum 15–20 g l − 1 ) and pH 5.5–8.0 (optimum pH 6.0). Generation time under optimal conditions was 2.5 h. Optimal growth occurred under chemolithoautotrophic conditions with H 2 as the energy source and CO 2 as the carbon source. Fe(III), Mn(IV), arsenate and selenate were used as electron acceptors. Peptone, tryptone, Casamino acids, sucrose, yeast extract, d -fructose, α- d -glucose and ( − )- d -arabinose also served as electron donors. No growth occurred in the presence of lactate or formate. The G+C content of the genomic DNA was 66.7 mol%. Phylogenetic analysis of the 16S rRNA gene sequence indicated that this organism is closely related to Deferrisoma camini , the first species of a recently described genus in the Deltaproteobacteria . Based on the 16S rRNA gene phylogenetic analysis and on physiological, biochemical and structural characteristics, the strain was found to represent a novel species, for which the name Deferrisoma palaeochoriense sp. nov. is proposed. The type strain is MAG-PB1 T ( = JCM 30394 T  = DSM 29363 T ).

Mediterranean Sea, Milos Island, Paleochori Bay↗

Higher methanotroph abundance and bottom-water methane in ponds with floating photovoltaic arrays

Floating photovoltaic (FPV) arrays alter the methane (CH 4 ) cycling dynamics of waterbodies on which they are deployed. Here, we investigated dissolved CH 4 dynamics and associated CH 4 cycling microbial communities (methanogens and methanotrophs) in the second year of FPV deployment (70% aerial coverage) in experimental ponds. We found that bottom-water CH 4 concentrations were twice as high in ponds with FPV compared to those without, while surface water CH 4 concentrations were orders of magnitude lower than bottom-waters, but did not differ between treatments. There was no change in the relative abundances of putative sediment methanogens or methanotrophs, but FPV restructured methanogen communities. FPV promoted late-summer methanotroph blooms in the water column, with abundances surpassing 1,000,000 cells mL -1 . We conclude that prolonged periods of CH 4 production in low oxygen FPV ponds favored blooms of methanotrophs, that may mitigate diffusive CH 4 emissions to the atmosphere by consuming dissolved CH 4 .

BioRxiv↗

A systematic literature review of forecasting and predictive models of harmful algal blooms in flowing waters

Occurrences of harmful algal blooms (HABs) in rivers challenge the belief that rivers are not susceptible to HABs because of their short residence times and fluctuating hydrology. Here we present a systematic literature review of predictive and forecasting models for HABs in flowing waters, including rivers, flowing in-stream reservoirs (e.g., run-of-river reservoirs and lock-and-dam systems) and tidal or estuarine systems with riverine processes. The review aimed to understand current and historical modeling approaches for predicting and forecasting river HABs, without restricting to specific taxa, such as cyanobacteria, or modeling endpoints. The review included 162 articles published over nearly 50 years, covering more than 80 rivers worldwide. Eutrophic, non-wadable rivers with in-stream obstruction were commonly modeled, though diverse environmental characteristics were reported. Most articles used algal biomass or chlorophyll as modeling endpoints, with a quarter using novel or unique endpoints. Algal toxins motivated model development in 23% of the articles, however just 5% used algal toxins as an endpoint. Only 6% of the articles modeled benthic HABs; the rest focused on pelagic HABs. There was no standard model used for modeling river HABs. Process-based models were more common (59%) than data-driven approaches (37%), with model formulations ranging from simple to complex, which contrasts with a lake-focused literature review of HAB models that found data-driven models were more common. Models in river settings shared similar input variables as those previously identified for lakes, such as water temperature, nutrients, and light availability. However, streamflow and other transport metrics took prominence in river models compared to lake models. Algal cell physiology (such as growth, predation, and motility) was routinely included as input data or as mathematical formulations in process-based models and these processes were frequently identified as an important predictor by the articles’ authors. Conversely, data-driven models rarely included these processes, instead using predictors related to environmental conditions, such as nutrients, water quality, water temperature, and streamflow. These important proxy predictors have apparent success with modeling overall algal biomass (irrespective of taxa) whereas other factors, such as those related to algal physiology and other biological processes, are likely responsible for more subtle shifts in community composition. These differences highlight the influence of data availability, especially for processes that are difficult, time-consuming, or expensive to measure, on model development and model outcomes, raising questions about the selection of modeling inputs and endpoints. Challenges to advancing river HAB modeling include the lack of site-specific model inputs representing key processes (e.g., photosynthetic parameters and predation rates), overlooked riverine environments like the benthos and side/back-channel areas, lack of information on environmental settings, and poorly reported model performance metrics. This review emphasizes opportunities for advancing river HAB modeling by learning from well-honed estuarine models, supporting current forecasting and operationalization efforts, and developing common datasets for river HAB model development and evaluation.

BioRxiv↗

SNP discovery in candidate adaptive genes using exon capture in a free-ranging alpine ungulate

Identification of genes underlying genomic signatures of natural selection is key to understanding adaptation to local conditions. We used targeted resequencing to identify SNP markers in 5321 candidate adaptive genes associated with known immunological, metabolic and growth functions in ovids and other ungulates. We selectively targeted 8161 exons in protein-coding and nearby 5′ and 3′ untranslated regions of chosen candidate genes. Targeted sequences were taken from bighorn sheep ( Ovis canadensis ) exon capture data and directly from the domestic sheep genome ( Ovis aries v. 3; oviAri3). The bighorn sheep sequences used in the Dall's sheep ( Ovis dalli dalli ) exon capture aligned to 2350 genes on the oviAri3 genome with an average of 2 exons each. We developed a microfluidic qPCR-based SNP chip to genotype 476 Dall's sheep from locations across their range and test for patterns of selection. Using multiple corroborating approaches ( lositan and bayescan ), we detected 28 SNP loci potentially under selection. We additionally identified candidate loci significantly associated with latitude, longitude, precipitation and temperature, suggesting local environmental adaptation. The three methods demonstrated consistent support for natural selection on nine genes with immune and disease-regulating functions (e.g. Ovar-DRA, APC, BATF2, MAGEB18), cell regulation signalling pathways (e.g. KRIT1, PI3K, ORRC3), and respiratory health (CYSLTR1). Characterizing adaptive allele distributions from novel genetic techniques will facilitate investigation of the influence of environmental variation on local adaptation of a northern alpine ungulate throughout its range. This research demonstrated the utility of exon capture for gene-targeted SNP discovery and subsequent SNP chip genotyping using low-quality samples in a nonmodel species.

Molecular Ecology Resources↗

State-and-transition simulation models: a framework for forecasting landscape change

Summary A wide range of spatially explicit simulation models have been developed to forecast landscape dynamics, including models for projecting changes in both vegetation and land use. While these models have generally been developed as separate applications, each with a separate purpose and audience, they share many common features. We present a general framework, called a state-and-transition simulation model (STSM), which captures a number of these common features, accompanied by a software product, called ST-Sim, to build and run such models. The STSM method divides a landscape into a set of discrete spatial units and simulates the discrete state of each cell forward as a discrete-time-inhomogeneous stochastic process. The method differs from a spatially interacting Markov chain in several important ways, including the ability to add discrete counters such as age and time-since-transition as state variables, to specify one-step transition rates as either probabilities or target areas, and to represent multiple types of transitions between pairs of states. We demonstrate the STSM method using a model of land-use/land-cover (LULC) change for the state of Hawai'i, USA. Processes represented in this example include expansion/contraction of agricultural lands, urbanization, wildfire, shrub encroachment into grassland and harvest of tree plantations; the model also projects shifts in moisture zones due to climate change. Key model output includes projections of the future spatial and temporal distribution of LULC classes and moisture zones across the landscape over the next 50 years. State-and-transition simulation models can be applied to a wide range of landscapes, including questions of both land-use change and vegetation dynamics. Because the method is inherently stochastic, it is well suited for characterizing uncertainty in model projections. When combined with the ST-Sim software, STSMs offer a simple yet powerful means for developing a wide range of models of landscape dynamics.

Methods in Ecology and Evolution↗

Using partial aggregation in spatial capture recapture

Spatial capture–recapture (SCR) models are commonly used for analysing data collected using noninvasive genetic sampling (NGS). Opportunistic NGS often leads to detections that do not occur at discrete detector locations. Therefore, spatial aggregation of individual detections into fixed detectors (e.g., centre of grid cells) is an option to increase computing speed of SCR analyses. However, it may reduce precision and accuracy of parameter estimations. Using simulations, we explored the impact that spatial aggregation of detections has on a trade‐off between computing time and parameter precision and bias, under a range of biological conditions. We used three different observation models: the commonly used Poisson and Bernoulli models, as well as a novel way to partially aggregate detections (Partially Aggregated Binary model [PAB]) to reduce the loss of information after aggregating binary detections. The PAB model divides detectors into K subdetectors and models the frequency of subdetectors with more than one detection as a binomial response with a sample size of K. Finally, we demonstrate the consequences of aggregation and the use of the PAB model using NGS data from the monitoring of wolverine ( Gulo gulo ) in Norway. Spatial aggregation of detections, while reducing computation time, does indeed incur costs in terms of reduced precision and accuracy, especially for the parameters of the detection function. SCR models estimated abundance with a low bias (<10%) even at high degree of aggregation, but only for the Poisson and PAB models. Overall, the cost of aggregation is mitigated when using the Poisson and PAB models. At the same level of aggregation, the PAB observation model out‐performs the Bernoulli model in terms of accuracy of estimates, while offering the benefits of a binary observation model (less assumptions about the underlying ecological process) over the count‐based model. We recommend that detector spacing after aggregation does not exceed 1.5 times the scale‐parameter of the detection function in order to limit bias. We recommend the use of the PAB observation model when performing spatial aggregation of binary data as it can mitigate the cost of aggregation, compared to the Bernoulli model.

Methods in Ecology and Evolution↗

Occupancy models for citizen-science data

Large‐scale citizen‐science projects, such as atlases of species distribution, are an important source of data for macroecological research, for understanding the effects of climate change and other drivers on biodiversity, and for more applied conservation tasks, such as early‐warning systems for biodiversity loss. However, citizen‐science data are challenging to analyse because the observation process has to be taken into account. Typically, the observation process leads to heterogeneous and non‐random sampling, false absences, false detections, and spatial correlations in the data. Increasingly, occupancy models are being used to analyse atlas data. We advocate a dual approach to strengthen inference from citizen science data for the questions the programme is intended to address: (a) the survey design should be chosen with a particular set of questions and associated analysis strategy in mind and (b) the statistical methods should be tailored not only to those questions but also to the specific characteristics of the data. We review the consequences of particular survey design choices that typically need to be made in atlas‐style citizen‐science projects. These include spatial resolution of the sampling units, allocation of effort in space, and collection of information about the observation process. On the analysis side, we review extensions of the basic occupancy models that are frequently necessary with atlas data, including methods for dealing with heterogeneity, non‐independent detections, false detections, and violation of the closure assumption. New technologies, such as cell‐phone apps and fixed remote detection devices, are revolutionizing citizen‐science projects. There is an opportunity to maximize the usefulness of the resulting datasets if the protocols are rooted in robust statistical designs and data analysis issues are being considered. Our review provides guidelines for designing new projects and an overview of the current methods that can be used to analyse data from such projects.

Methods in Ecology and Evolution↗

Spatially explicit management of genetic diversity using ancestry probability surfaces

1. Ecological restoration and conservation efforts are increasing worldwide and the management of intraspecific genetic variation in plants and animals, an important component of biodiversity, is increasingly valued. As a result, tailorable, spatially explicit approaches to map genetic variation are needed to support decision-making and management frameworks related to the recovery of threatened and endangered species and the maintenance of genetic resources in species utilized by humans, such as for restoration or agricultural purposes. 2. Here, we describe and demonstrate a workflow to spatially interpolate patterns of genetic differentiation using novel functions in the R package POPMAPS ( Pop ulation M anagement using A ncestry P robability S urfaces). Our approach uses empirical genetic data to estimate ancestry coefficients across a user-defined landscape correlated with patterns of differentiation in the focal species. The resulting surface, which we term the ancestry probability surface, includes two components: hard population boundaries and estimations of uncertainty that represent confidence in population assignments (i.e., ancestry probabilities). 3. An ancestry probability surface developed for Hilaria jamesii , an important graminoid utilized in restoration across the western United States, demonstrates the functionality of POPMAPS . Genetic distances among empirical sites correlated better with least-cost distances across suitable habitat than with geographic distances, informing the surface over which the interpolation was conducted (i.e., a model indicating habitat suitability). A jackknifing procedure identified parameter values resulting in robust population assignments across the species’ range, which were utilized in downstream analyses to estimate ancestry coefficients from empirical data. Ancestry coefficients were translated into ancestry probabilities, which tended to be low for cells that were intermediate in distance between empirical sampling locations representing different populations or when influenced by empirical sampling locations with mixed genetic ancestry. 4. POPMAPS allows users to tailor parameter values and analytical approaches and thereby incorporate species-specific biological characteristics and desired levels of uncertainty into maps illustrating patterns of genetic differentiation. Ancestry probability surfaces may be used to guide management or investigate further ecological or evolutionary hypotheses. We discuss how maps produced by POPMAPS can inform multiple management challenges including species recovery planning and the utilization of commonly used species in restoration.

Methods in Ecology and Evolution↗

Characterizing the oral and distal gut microbiota of the threatened southern sea otter (Enhydra lutris nereis) to enhance conservation practice

The southern sea otter ( Enhydra lutris nereis ) is a threatened sub-species in coastal ecosystems. To understand better the role of diet, monitor health, and enhance management of this and other marine mammal species, we characterized the oral (gingival) and distal gut (rectal and fecal) microbiota of 158 wild southern sea otters living off the coast of central California, USA, and 12 captive sea otters, some of which were included in a diet shift experiment. We found that the sea otter fecal microbiota was distinct from that of three other otter species, and that captivity does not significantly alter the community structure of the sea otter gingival or distal gut microbiota. Metagenomic analysis unexpectedly revealed that the majority of sea otter fecal DNA is derived from prey, rather than from indigenous bacteria or host cells as with most other mammals. We speculate that a reduced bacterial biomass in the sea otter gut reflects rapid gut transit time and a particular strategy for foraging and energy harvest. This study establishes a reference for the healthy sea otter microbiota, highlights how a marine lifestyle may shape the mammalian microbiota, and may inform future health assessments and conservation management of sea otter populations.

California↗

Marine mammal hotspots across the circumpolar Arctic

Aim Identify hotspots and areas of high species richness for Arctic marine mammals. Location Circumpolar Arctic. Methods A total of 2115 biologging devices were deployed on marine mammals from 13 species in the Arctic from 2005 to 2019. Getis-Ord G i * hotspots were calculated based on the number of individuals in grid cells for each species and for phylogenetic groups (nine pinnipeds, three cetaceans, all species) and areas with high species richness were identified for summer (Jun-Nov), winter (Dec-May) and the entire year. Seasonal habitat differences among species’ hotspots were investigated using Principal Component Analysis. Results Hotspots and areas with high species richness occurred within the Arctic continental-shelf seas and within the marginal ice zone, particularly in the “Arctic gateways” of the north Atlantic and Pacific oceans. Summer hotspots were generally found further north than winter hotspots, but there were exceptions to this pattern, including bowhead whales in the Greenland-Barents Seas and species with coastal distributions in Svalbard, Norway and East Greenland. Areas with high species richness generally overlapped high-density hotspots. Large regional and seasonal differences in habitat features of hotspots were found among species but also within species from different regions. Gap analysis (discrepancy between hotspots and IUCN ranges) identified species and regions where more research is required. Main conclusions This study identified important areas (and habitat types) for Arctic marine mammals using available biotelemetry data. The results herein serve as a benchmark to measure future distributional shifts. Expanded monitoring and telemetry studies are needed on Arctic species to understand the impacts of climate change and concomitant ecosystem changes (synergistic effects of multiple stressors). While efforts should be made to fill knowledge gaps, including regional gaps and more complete sex and age coverage, hotspots identified herein can inform management efforts to mitigate the impacts of human activities and ecological changes, including creation of protected areas.

Diversity and Distributions↗

Designing ecological climate change impact assessments to reflect key climatic drivers

Identifying the climatic drivers of an ecological system is a key step in assessing its vulnerability to climate change. The climatic dimensions to which a species or system is most sensitive – such as means or extremes – can guide methodological decisions for projections of ecological impacts and vulnerabilities. However, scientific workflows for combining climate projections with ecological models have received little explicit attention. We review Global Climate Model (GCM) performance along different dimensions of change and compare frameworks for integrating GCM output into ecological models. In systems sensitive to climatological means, it is straightforward to base ecological impact assessments on mean projected changes from several GCMs. Ecological systems sensitive to climatic extremes may benefit from what we term the ‘model space’ approach: a comparison of ecological projections based on simulated climate from historical and future time periods. This approach leverages the experimental framework used in climate modeling, in which historical climate simulations serve as controls for future projections. Moreover, it can capture projected changes in the intensity and frequency of climatic extremes, rather than assuming that future means will determine future extremes. Given the recent emphasis on the ecological impacts of climatic extremes, the strategies we describe will be applicable across species and systems. We also highlight practical considerations for the selection of climate models and data products, emphasizing that the spatial resolution of the climate change signal is generally coarser than the grid cell size of downscaled climate model output. Our review illustrates how an understanding of how climate model outputs are derived and downscaled can improve the selection and application of climatic data used in ecological modeling.

Global Change Biology↗

Use of general purpose graphics processing units with MODFLOW

To evaluate the use of general-purpose graphics processing units (GPGPUs) to improve the performance of MODFLOW, an unstructured preconditioned conjugate gradient (UPCG) solver has been developed. The UPCG solver uses a compressed sparse row storage scheme and includes Jacobi, zero fill-in incomplete, and modified-incomplete lower-upper (LU) factorization, and generalized least-squares polynomial preconditioners. The UPCG solver also includes options for sequential and parallel solution on the central processing unit (CPU) using OpenMP. For simulations utilizing the GPGPU, all basic linear algebra operations are performed on the GPGPU; memory copies between the central processing unit CPU and GPCPU occur prior to the first iteration of the UPCG solver and after satisfying head and flow criteria or exceeding a maximum number of iterations. The efficiency of the UPCG solver for GPGPU and CPU solutions is benchmarked using simulations of a synthetic, heterogeneous unconfined aquifer with tens of thousands to millions of active grid cells. Testing indicates GPGPU speedups on the order of 2 to 8, relative to the standard MODFLOW preconditioned conjugate gradient (PCG) solver, can be achieved when (1) memory copies between the CPU and GPGPU are optimized, (2) the percentage of time performing memory copies between the CPU and GPGPU is small relative to the calculation time, (3) high-performance GPGPU cards are utilized, and (4) CPU-GPGPU combinations are used to execute sequential operations that are difficult to parallelize. Furthermore, UPCG solver testing indicates GPGPU speedups exceed parallel CPU speedups achieved using OpenMP on multicore CPUs for preconditioners that can be easily parallelized.

Ground Water↗

Custom map projections for regional groundwater models

For regional groundwater flow models (areas greater than 100,000 km 2 ), improper choice of map projection parameters can result in model error for boundary conditions dependent on area (recharge or evapotranspiration simulated by application of a rate using cell area from model discretization) and length (rivers simulated with head-dependent flux boundary). Smaller model areas can use local map coordinates, such as State Plane (United States) or Universal Transverse Mercator (correct zone) without introducing large errors. Map projections vary in order to preserve one or more of the following properties: area, shape, distance (length), or direction. Numerous map projections are developed for different purposes as all four properties cannot be preserved simultaneously. Preservation of area and length are most critical for groundwater models. The Albers equal-area conic projection with custom standard parallels, selected by dividing the length north to south by 6 and selecting standard parallels 1/6th above or below the southern and northern extent, preserves both area and length for continental areas in mid latitudes oriented east-west. Custom map projection parameters can also minimize area and length error in non-ideal projections. Additionally, one must also use consistent vertical and horizontal datums for all geographic data. The generalized polygon for the Floridan aquifer system study area (306,247.59 km 2 ) is used to provide quantitative examples of the effect of map projections on length and area with different projections and parameter choices. Use of improper map projection is one model construction problem easily avoided.

Groundwater↗

Incorporating snowmelt into daily estimates of recharge using a state-space model of infiltration

A state-space model (SSM) of infiltration estimates daily groundwater recharge using time-series of groundwater-level altitude and meteorological inputs (liquid precipitation, snowmelt, and evapotranspiration). The model includes diffuse and preferential flow through the unsaturated zone, where preferential flow is a function of liquid precipitation and snowmelt rates and a threshold rate, above which there is direct recharge to the water table. Model parameters are estimated over seasonal periods and the SSM is coupled with the Kalman Filter (KF) to assimilate recent observations (hydraulic head) and meteorological inputs into recharge estimates. The approach can take advantage of real-time hydrologic and meteorological data to deliver real-time recharge estimates. The model is demonstrated on daily observations from two bedrock wells in carbonate aquifers of northwestern New York (USA) between 2013 and 2018. Meteorological inputs for liquid precipitation and snowmelt are compiled from SNODAS (2021). Results for recharge during winter and spring seasons show preferential flow events to the water table from liquid precipitation, snowmelt, or a combination of the two. Recharge estimates summed annually are consistent with previous estimates of recharge reported from groundwater flow and surface-process models. Results from the SSM and KF point to errors in meteorological inputs, such as the snowmelt rate, that are not compatible with hydraulic head observations. Whereas liquid and solid precipitation are measured at discrete stations and extrapolated to 1-km 2 grid cells, snowmelt is a meteorological modeled outcome that may not represent conditions in the vicinity of monitoring well locations.

Groundwater↗

Some aspects of pathogenesis of infectious hematopoietic necrosis (IHN)

The histopathogenesis of infectious haematopoietic necrosis (IHN) virus infection was studied by exposing juvenile sockeye salmon ( Oncorhynchus nerka ) to the IHN virus. Fish samples were taken every 24 h for histological examination and for determination of virus concentration. A close correlation was found between histopathological changes and virus concentration. The most significant changes occurred 4 days after exposure. The haematopocitic tissue of the kidney was the most extensively involved but minor degenerative changes were seen in the liver, pancreas, and in the granular cells of the digestive tract. On the 4th day, maximum tissue concentration of virus was reached and the mortality increased. By the 5th day, 90% of the samples showed extensive pathological changes in the kidney, together with variable changes in spleen, liver, pancreas, and gut. Similarities in the histopathogenesis of IHN, Oregon sockeye disease (OSD), Sacramento River chinook disease (SRCD) and viral haemorrhagic septicaemia (VHS), are discussed.

Journal of Fish Biology↗

Biochemical, histological and behavioural aspects of visual function during early development of rainbow trout

Retinal structure and concentration of retinoids involved in phototransduction changed during early development of rainbow trout Oncorhynchus mykiss, correlating with improvements in visual function. A test chamber was used to evaluate the presence of optokinetic or optomotor responses and to assess the functionality of the integrated cellular, physiological and biochemical components of the visual system. The results indicated that in rainbow trout optomotor responses start at 10 days post-hatch, and demonstrated for the first time that increases in acuity, sensitivity to low light as well as in motion detection abilities occur from this stage until exogenous feeding starts. The structure of retinal cells such as cone ellipsoids increased in length as photopic visual acuity improved, and rod densities increased concurrently with improvements in scotopic thresholds (2.2 log10 units). An increase in the concentrations of the chromophore all-trans-retinal correlated with improvements of all behavioural measures of visual function during the same developmental phase. ?? 2004 The Fisheries Society of the British Isles.

Journal of Fish Biology↗