Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82Linked to original sources

On the coherence of ground motion in the San Fernando valley

We present an analysis of the coherence of seismic ground motion recorded on alluvial sediments in the San Fernando Valley, California. Using aftershocks of the 17 January 1994 M w 6.7 earthquake recorded at a quasi-dense array of portable stations, we analyze the coherence of three well-recorded magnitude 3.7 to 4.0 events over the frequency range 0.5 to 15 Hz and a distance range of 0.5 to 5.3 km. All stations are located at sites with broadly similar near-site geology, characterized by medium to fine-grain Quaternary alluvial sediments. On average, relatively high values of coherence are observed for distances up to 3 to 4 km and frequencies up to 2 to 3 Hz; coherence drops sharply at frequencies near and above 3 Hz. Although average coherence functions are described reasonably well by a log-linear relationship with frequency, the curves at all distances exhibit a flattening at low frequencies that is not consistent with previous observations of coherence at hardrock sites. The distance decay of coherence is also markedly less strong, with high coherence values observed over station separations corresponding to multiple wavelengths. This may reflect fundamental differences in shallow-wave propagation in the two environments, with high-frequency scattering relatively more dominant in regions of hard-rock near-surface geology. Within a sedimentary basin or valley, the site response itself generally reflects a resonance phenomenon that may tend to give rise to more uniform ground motions. However, previous studies have demonstrated the existence of pathological focusing and amplification effects within complex sedimentary basin environments such as the greater Los Angeles region; our results undoubtedly do not quantify the full range of ground-motion variability at all sites, but rather represent the level of that variability that can be expected, and quantified, for typical source/receiver paths.

California↗

Proterozoic structure, Cambrian rifting, and younger faulting as revealed by a regional seismic reflection network in the southern Illinois Basin

Four high-quality seismic reflection profiles through the southern Illinois Basin, totaling 245 km in length, provide an excellent regional subsurface stratigraphic and structural framework for evaluation of seismic risk, hydrocarbon occurrence, and other regional geologic studies. These data provide extensive subsurface information on the geometry of the intersection of the Cambrian Reelfoot and Rough Creek rifts, on extensive Proterozoic reflection sequences, and on structures (including the Fluorspar Area Fault Complex and Hicks Dome) that underlie a transitional area between the well-defined New Madrid seismic zone (to the southwest) and a more diffuse area of seismicity in the southern Illinois Basin. Our principal interpretations from these data are listed here in order of geologic age, from oldest to youngest: Prominent Proterozoic layering, possibly equivalent to Proterozoic (∼1 Ga) Middle Run Formation clastic strata and underlying (1.3–1.5 Ga) volcanic rocks of the East Continent rift basin, has been strongly deformed, probably as part of the Grenville foreland fold and thrust belt. A well-defined angular unconformity is seen in many places between Proterozoic and Cambrian strata; a post-Grenville Proterozoic sequence is also apparent locally, directly beneath the base of the Cambrian. We infer a major reversal in Cambrian rift polarity (accommodation zone) in the Rough Creek Graben in western Kentucky. Seismic facies analysis suggests the presence of basin-floor fan complexes at and near the base of the Cambrian interval and within parts of a Proterozoic post-Grenville sequence in several parts of the Rough Creek Graben. There is an abrupt pinchout of the Mount Simon Sandstone against crystalline basement beneath the Dale Dome (near the Texaco no. 1 Cuppy well, Hamilton County) in southeastern Illinois, and a more gradual Mount Simon pinchout to the southeast. Where crossed by the seismic reflection line in southeast Illinois, some faults in the Wabash Valley Fault System produce discrete offset in Ordovician and younger strata only; one of the Wabash Valley faults cuts the top of the Precambrian on this seismic profile. The data show clear evidence of late Paleozoic reverse faulting along both boundaries of the Rough Creek Graben in western Kentucky, although significant unreactivated Cambrian rift-bounding faults are also preserved. Chaotic reflection patterns in the lower and middle Paleozoic strata near Hicks Dome, southern Illinois, are related to a combination of intrusive brecciation, intense faulting, and alteration of carbonate strata by acidic mineralizing fluids, all of which occurred in the Permian. Late Paleozoic(?) reverse faulting is interpreted on one flank of the Rock Creek Graben, southern Illinois. Permian and Mesozoic(?) extensional faulting is clearly imaged in the Fluorspar Area Fault Complex; neotectonic studies suggest that these structures were reactivated in the Quaternary.

Illinois, Indiana, Kentucky, Missouri↗

Preliminary report on the 16 October 1999 M 7.1 Hector mine, California, earthquake

The M w 7.1 Hector Mine, California, earthquake occurred at 9:46 GMT on 16 October 1999. The event caused minimal damage because it was located in a remote, sparsely populated part of the Mojave Desert, approximately 47 miles east-southeast of Barstow, with epicentral coordinates 34.59°N 116.27°W and a hypocentral depth of 5 ± 3 km. Twelve foreshocks, M 1.9-3.8, preceded the mainshock during the previous twelve hours. All of these events were located close to the hypocenter of the mainshock. The Hector Mine earthquake occurred within the Eastern California Shear Zone (ECSZ). By virtue of its remote location, the societal impact of the Hector Mine earthquake was, fortunately, minimal in spite of the event's appreciable size. The ECSZ is characterized by high seismicity, a high tectonic strain rate, and a broad, distributed zone of north-northwest-trending faults (ECSZ; Figure 1 ; Dokka and Travis, 1990 ; Sauber et al., 1986 ; Sauber et al., 1994 ; Sieh et al., 1993 ). Data regarding the slip rates of faults within the ECSZ suggest that on the order of 15% of the Pacific-North American plate motion occurs along this zone ( Sauber et al., 1986 ; Wesnousky, 1986 ). Most of the faults in the ECSZ have low slip rates and long repeat times for major earthquakes, on the order of several thousands to tens of thousands of years. The occurrence of the Hector Mine earthquake within seven years and only about 30 km east of the 1992 M w 7.3 Landers earthquake suggests that the closely spaced surface faults in the ECSZ are mechanically related. The Hector Mine event involved rupture on two previously mapped fault zones—the Bullion Fault and an unnamed, more northerly-trending fault that is informally referred to in this paper as the Lavic Lake Fault (Dibblee, 1966 , 1967a , b ). Traces of the Bullion Fault exhibit evidence of Holocene displacement and were zoned as active in 1988 under California's Mquist-Priolo Earthquake Fault Zoning Act ( Hart and Bryant, 1997 ). The pattern of rupture along more than one named fault was also observed from the 1992 Landers earthquake ( Hauksson et al., 1993 ; Sieh et al., 1994). Much of the fault zone that produced the Hector Mine earthquake had been buried by relatively young stream deposits, and the fault scarps in bedrock have a subdued morphology. It appears that these faults have not experienced significant offset for perhaps 10,000 years or more ( Hart, 1987 ). Planned future investigations will refine the age of the last event on these faults. The portion of the Lavic Lake Fault that ruptured between the northern end of the Bullion Mountains and Lavic Lake had not previously been mapped. However, our field investigations have identified ancient, subdued fault scarps along portions of the 1999 rupture zone in this area. It thus appears that the entire segment of the Lavic Lake Fault that was involved in the 1999 event had ruptured in the past. As is typical for most faults within the Eastern California Shear Zone, the rate of movement along the Lavic Lake Fault may be quite slow (<1 mm/yr) and should produce earthquakes only infrequently. This event is a reminder that faults that have ruptured in late Quaternary time, but that lack evidence of Holocene displacement, can still produce earthquakes in this low-slip-rate tectonic setting. Additionally, the Hector Mine earthquake is noteworthy for a couple of other reasons. First, it clearly produced triggered seismicity over much of southern California, from the rupture zone toward the south-southwest in particular. Second, as we will discuss, the event may provide new data and insight into recently developed paradigms concerning earthquake interactions and the role of static stress changes. Questions such as these will, of course, be the subject of extensive detailed analyses in years to come. Fortunately, the Hector Mine sequence will provide one of the best data sets obtained to date for a significant earthquake in the United States. Because it occurred when major upgrades to both the regional seismic network (TriNet) and the regional geodetic network (SCIGN) were well underway, the Earth science community will have abundant high-quality data with which to explore the important and interesting questions that have been raised. In this paper, we present and discuss the basic data and preliminary results from the Hector Mine earthquake.

California↗

Ratification of Neogene subseries as formal units in international chronostratigraphy

The International Union of Geological Sciences Executive Committee (IUGS EC) voted on 13 October 2021 to ratify a proposal for the Neogene subseries/subepochs to have formal status. They are now incorporated into a sixtiered chronostratigraphic hierarchy within the International Chronostratigraphic Chart (ICC). The Lower/Early Miocene Subseries/Subepoch comprises the Aquitanian and Burdigalian stages/ages, the Middle Miocene Subseries/Subepoch comprises the Langhian and Serravallian stages/ages, the Upper/Late Miocene Subseries/Subepoch comprises the Tortonian and Messinian stages/ages, the Lower/Early Pliocene Subseries/Subepoch comprises the Zanclean Stage/Age and the Upper/Late Pliocene Subseries/Subepoch comprises the Piacenzian Stage/Age. This ratification is an important move towards both a common language in the wider Earth Sciences community and a step forward in the unification of Cenozoic chronostratigraphy, with Neogene and Quaternary subseries/subepochs now formalized.

Episodes↗

Arctic biodiversity: Increasing richness accompanies shrinking refugia for a cold-associated tundra fauna

As ancestral biodiversity responded dynamically to late-Quaternary climate changes, so are extant organisms responding to the warming trajectory of the Anthropocene. Ecological predictive modeling, statistical hypothesis tests, and genetic signatures of demographic change can provide a powerful integrated toolset for investigating these biodiversity responses to climate change, and relative resiliency across different communities. Within the biotic province of Beringia, we analyzed specimen localities and DNA sequences from 28 mammal species associated with boreal forest and Arctic tundra biomes to assess both historical distributional and evolutionary responses and then forecasted future changes based on statistical assessments of past and present trajectories, and quantified distributional and demographic changes in relation to major management regions within the study area. We addressed three sets of hypotheses associated with aspects of methodological, biological, and socio-political importance by asking (1) what is the consistency among implications of predicted changes based on the results of both ecological and evolutionary analyses; (2) what are the ecological and evolutionary implications of climate change considering either total regional diversity or distinct communities associated with major biomes; and (3) are there differences in management implications across regions? Our results indicate increasing Arctic richness through time that highlights a potential state shift across the Arctic landscape. However, within distinct ecological communities, we found a predicted decline in the range and effective population size of tundra species into several discrete refugial areas. Consistency in results based on a combination of both ecological and evolutionary approaches demonstrates increased statistical confidence by applying cross-discipline comparative analyses to conservation of biodiversity, particularly considering variable management regimes that seek to balance sustainable ecosystems with other anthropogenic values. Refugial areas for cold-adapted taxa appear to be persistent across both warm and cold climate phases and although fragmented, constitute vital regions for persistence of Arctic mammals.

Ecosphere↗

Processes that initiate turbidity currents and their influence on turbidites: A marine geology perspective

How the processes that initiate turbidity currents influence turbidite deposition is poorly understood, and many discussions in the literature rely on concepts that are overly simplistic. Marine geological studies provide information on the initiation and flow path of turbidity currents, including their response to gradient. In case studies of late Quaternary turbidites on the eastern Canadian and western U.S. margins, initiation processes are inferred either from real-time data for historical flows or indirectly from the age and contemporary paleogeography, erosional features, and depositional record. Three major types of initiation process are recognized: transformation of failed sediment, hyperpycnal flow from rivers or ice margins, and resuspension of sediment near the shelf edge by oceanographic processes. Many high-concentration flows result from hyperpycnal supply of hyperconcentrated bedload, or liquefaction failure of coarse-grained sediment, and most tend to deposit in slope conduits and on gradients < 0.5° at the base of slope and on the mid fan. Highly turbulent flows, from transformation of retrogressive failures and from ignitive flows that are triggered by oceanographic processes, tend to cannibalize these more proximal sediments and redeposit them on lower gradients on the basin plain. Such conduit flushing provides most of the sediment in large turbidites. Initiation mechanism exerts a strong control on the duration of turbidity flows. In most basins, there is a complex feedback between different types of turbidity-current initiation, the transformation of the flows, and the associated slope morphology. As a result, there is no simple relationship between initiating process and type of deposit.

Journal of Sedimentary Research↗

The tectonically controlled San Gabriel Channel–Lobe Transition Zone, Catalina Basin, Southern California Borderland

High-resolution geophysical data across the Catalina Basin, offshore southern California, USA, reveal a complex channel–lobe transition zone (CLTZ) and provide an opportunity to characterize an entire seafloor CLTZ in a tectonically active and confined-basin setting. The seafloor morphology, distribution of depositional and erosional features, and location of depocenters in the CLTZ are controlled by shifting confinement and seafloor gradient related to inherited basement structures, active faults, and basin margins. Below a Holocene hemipelagic drape, the Catalina Basin is dominated by CLTZ and lobe sedimentation from the San Gabriel Channel, with lesser accumulations from local sediment sources limited to basin margins. The San Gabriel Channel is structurally confined as it enters the Catalina Basin and appears unable to avulse; it continues into the basin as a channel that rapidly widens, decreases in relief, and becomes scoured at its margins. A CLTZ is imaged between the confined San Gabriel channel and its terminal lobes deposited > 50 km into the basin. Narrow, apparently disconnected channels with knickpoints occur throughout the proximal and mid-CLTZ and are concentrated near basement highs and basin-bounding Quaternary-active dextral strike-slip faults. A field of small-scale erosional crescent-shaped scours (∼ 100 m length, ∼ 200 m width, up to ∼ 10 m relief across ∼ 30 km 2 region) occurs above a partially buried basement high that creates perturbations in seafloor gradient. Likewise, above a buried basement structure that locally increases seafloor gradient (up to 0.4°), the distal CLTZ may contain sediment waves (∼ 2–4 m wave height and ∼ 200–300 m wavelength) that are smaller than many other CLTZ examples. This study of the San Gabriel CLTZ in Catalina Basin provides high-resolution geophysical data coverage of a complete CLTZ and illustrates a tectonically controlled end-member CLTZ from the modern seafloor.

Journal of Sedimentary Research↗

Stratigraphic architecture and fluvial interpretations of the Upper Cretaceous (Turonian?) Middendorf Formation, Chesterfield County, South Carolina, U.S.A.

The Upper Cretaceous (Turonian?) Middendorf Formation is a sand-rich stratigraphic unit of fluvial origin that forms a large aquifer in the U.S. Atlantic Coastal Plain. In Chesterfield County (South Carolina), which is the site of the type locality, the formation ranges in thickness from 66.5 to > 119.7 meters. The base of the formation is an unconformity above Paleozoic metasiltstone, and the upper contact is an unconformity above which lies sand of the Quaternary Pinehurst Formation. Outcrops display the following five facies assemblages: 1) sandstone to conglomeratic sandstone (fluvial bar and channel deposits), 2) beds of alternating laminae of sandstone and mudstone (fluvial overbank or floodplain deposits), 3) ≥ 1 m-thick beds of clay (swamp deposits, floodplain deposits, and/or sediment that accumulated in abandoned fluvial channels), 4) 0.2–0.5 m-thick planar to slightly undulatory beds of framework-supported sandstone with a mud matrix (traction-dominated current deposits at the top of fluvial bars, upper-flow-regime bedform deposits in subsidiary fluvial channels, or coarse-grained overbank deposits), and 5) sandstone to conglomeratic sandstone cemented by iron (interpreted as fluvial bar and channel deposits, with the iron cement being a diagenetic “groundwater ferricrete” that formed via the circulation of shallow groundwater and the oxidation of iron-bearing minerals). Kaolinite in various forms is pervasive throughout the formation and is interpreted as an early diagenetic phenomenon that formed by prolonged postdepositional weathering and flushing by meteoric water under a warm and humid paleoclimate. The fluvial system that formed the Middendorf Formation prograded into the area from the west or northwest from uplifted margins of Mesozoic rift basins and/or the Appalachian Mountains. This progradation was a response to a base-level fall and the sediment accumulated during base-level lowstand and subsequent early transgression. In Chesterfield County, the Middendorf Formation can be subdivided into three fining-upward sequences. Each sequence consists predominantly of medium to coarse sand with a greater abundance of gravel in the lower part of the sequence and a greater abundance of clay and silt beds in the upper part. Each sequence is interpreted as either a response to autogenic processes or a response to allogenic sea-level changes, specifically a higher-order (higher-frequency) progression from relative lowstand conditions to early transgression whereby coarse sand and gravel (e.g., fluvial bar and channel deposits) were preserved during initial lowstand conditions and a greater proportion of mud and finer-grained sand (floodplain deposits) were preserved during subsequent early transgression. The Middendorf Formation is correlative with several other kaolinite-rich fluvial sandstones in North America including the Raritan Formation in New Jersey, the Tuscaloosa Formation of the eastern Gulf of Mexico (Alabama, Mississippi, Louisiana), the Woodbine Formation of the central Gulf of Mexico (Texas), and the Frontier Formation of Wyoming. The accumulation and preservation of these formations occurred in response to a Turonian eustatic sea-level fall and subsequent transgression, and the early diagenetic kaolinite in these formations is attributed to similar warm and humid paleoclimate conditions.

South Carolina↗

Chronologic model and transgressive-regressive signatures in the late neocene siliciclastic foundation (long key formation) of the Florida keys

Recent drilling of continuous cores in southernmost Florida has documented a thick unit of upper Neogene siliciclastics subjacent to surficial shallow-water Quaternary carbonates exposed on islands of the Florida Keys. The siliciclastics comprise the Long Key Formation and were identified in two cores collected from the middle and upper Florida Keys. A chronologic model based on new planktic foraminiferal biochronology and strontium-isotope chronology suggests the timing of siliciclastic deposition and provides a basis for regional correlation. The chronologic model, supplemented by vertical trends in quartz grain size, pattern of planktic menardiiform coiling direction, and paleoenvironmental interpretations of benthic foraminiferal assemblages, shows that the Long Key Formation contains three intervals (I-III) of varying thickness, grain-size composition, and paleowater depth. Interval I is uppermost Miocene. The quartz grains in Interval I fine upward from basal very coarse sand to fine and very fine sand. Benthic foraminifera indicate an upward shift from an outer-shelf to inner-shelf depositional environment. Interval II, deposited during the late early to early late Pliocene, contains reworked upper Miocene siliciclastics and faunas. In the upper Keys, quartz grains in Interval II range from very coarse sand that fines upward to very fine sand and then coarsens to very coarse and medium sand. In situ benthic faunas indicate an upward shift from outer-shelf to inner-shelf deposition. In the middle Keys, Interval II is different, with the quartz grains ranging primarily from medium to very fine sand. In situ benthic taxa indicate deposition on an inner shelf. In both the middle and upper Keys, the upper Pliocene siliciclastics of Interval III contain quartz grains ranging from very coarse to very fine sands that were deposited on an inner shelf. A sequence boundary between Interval I and Interval II is suggested by; an abrupt shift in the strontium-isotope chemostratigraphy; coarsening in quartz grain size above the boundary; an abrupt landward shift in depositional facies in the upper Keys core; and a distinct variation in the predominant coiling direction of the menardiiform planktic foraminifera, from fluctuating dextral-sinistral to dextral in the upper Keys core. Successive siliciclastic infilling, likely associated with eustatic sea-level change and current redeposition, formed a foundation for subsequent carbonate deposition. Deep-sea biostratigraphic techniques, integrated with ages derived from strontium-isotope chemostratigraphy, can be successfully applied to coastal-margin sequences, even though a depauperate suite of faunal markers is common.

Journal of Sedimentary Research↗

A new record of the late Pleistocene coral Pocillopora palmata from the Dry Tortugas, Florida reef tract, USA

Pocilloporid corals dominated shallow-water environments in the Caribbean during much of the Cenozoic; however, the regional diversity of this family declined over the last 15 My, culminating with the extinction of its final member, Pocillopora palmata , during the latest Pleistocene. Here we present a new record of P. palmata from Dry Tortugas National Park in the Florida Keys and infer its likely age. Although most existing records of P. palmata are from the sub-aerial reef deposits of MIS5e (&sim; 125 ka), the presently submerged reef in the Dry Tortugas was too deep (> 18 m) during this period to support significant reef growth. In contrast, the maximum water depth during MIS5a (&sim; 82 ka) was only &sim; 5.6 m, which would have been ideal for P. palmata . Diagenetic alteration prevented direct dating of the samples; however, the similarity between the depths of the Pleistocene bedrock in the Dry Tortugas and other reefs in the Florida Keys, which have been previously dated to MIS5a, support the conclusion that P. palmata likely grew in the Dry Tortugas during this period. Our study provides important new information on the history of P. palmata , but it also highlights the vital need for more comprehensive studies of the Quaternary history of Caribbean reef development. With modern reef degradation already driving yet another restructuring of Caribbean coral assemblages, insights from past extinctions may prove critical in determining the prognosis of Caribbean reefs in the future.

Florida↗

A modern analogue for tectonic, eustatic, and climatic processes in cratonic basins: Gulf of Carpentaria, northern Australia

The Gulf of Carpentaria is a tropical, silled epicontinental sea and may be a modern analogue for ancient cratonic basins. For the purpose of this study, the Gulf of Carpentaria is compared to Pennsylvanian cratonic basins of the United States. During the Pennsylvanian, the North American continent moved from the Southern Hemisphere, through the Equator, into the Northern Hemisphere. Today, the Gulf of Carpentaria–New Guinea region is a few degrees south of the Equator and is moving towards it. During the Pennsylvanian, the world was subjected to major glaciations and associated sea-level changes. The island of New Guinea and the Gulf of Carpentaria have undergone similar processes during the Quaternary. A reconnaissance seismic survey of the gulf conducted by the USGS and the Australian National University (ANU), combined with oil-exploration well data, provided the first step in a systematic evaluation of a modern tropical epicontinental system. During the Cenozoic, the region was dominated by terrestrial sedimentation in a temperate climate. At the same time, carbonates were being deposited on the northern shelf edge of the Australian Plate. During the Miocene, carbonate deposition expanded southward into the gulf region. Then in the Late Miocene, carbonate sedimentation was replaced by terrigenous clastics derived from the developing Central Range of the island of New Guinea, which developed a wetter climate while moving northwards into the tropics. At least 14 basin-wide transgressive–regressive cycles are identified by channels that were eroded under subaerial conditions since about the Miocene. Comparison of the modern Gulf of Carpentaria sequences with those of the Pennsylvanian reveals many similarities.

Gulf Of Carpentaria↗

Stratigraphy of the Mississippi-Alabama shelf and the Mobile River incised-valley system

The Mobile River incised-valley system located in the northern Gulf of Mexico occupies an area from southern Alabama through Mobile Bay to the outer Mississippi-Alabama continental shelf. During the Wisconsinan regression, this incised-valley system was fluvially eroded and extended across the exposed shelf to a shelf-margin delta complex. The last postglacial transgression drowned the entrenched alluvial valleys and reworked the alluvial fill and estuarine deposits to form shoals on the middle shelf. As the postglacial transgression slowed. Mobile Bay was formed. Mobile Bay is a large estuarine system protected by barrier islands. This paper documents the late Quaternary history of the Mobile River incised valley and fill. Mobile Bay is a large (> 1000 km 2 ) microtidal estuary in southern Alabama that receives drainage through the Mobile River system. The Mobile River catchment is the fourth largest in the United States and terminates at the bayhead delta of Mobile Bay. The bay is a classic example of a wave-dominated, drowned, fluvial incised valley. During the middle-late Wisconsinan, glacial maximum, relative sea level was approximately 120 m lower than present. The Mobile River incised valley was a conduit for drainage from the catchment to the shelf margin. The sediment carried by the fluvial system during this lowstand passed through the Mobile River incised valley, across the exposed shelf and was deposited on the shelf margin as deltaic lobes. Rapid sea-level rise forced coastal-plain shorelines landward across the present mid-continental shelf. Transgression of the estuary mouth left a series of estuary-mouth-bar deposits that were reworked and overlie alluvial fill. These sand-rich deposits were submerged by the continuing transgression and reworked to form shoals As the Holocene sea-level rise slowed, the Mobile River incised valley became an estuarine depocenter. In the present alluvial valley, lowstand deposits are overlain by estuarine sediments deposited during the initial flooding of the valley and subsequent formation of Mobile Bay. During the present highstand, longshore sediment transport formed a spit across much of the bay mouth, creating a restricted estuary into which a bayhead delta has prograded. Late Holocene deposits in Mobile Bay consists predominantly or lagoonal sediments with bayhead-delta deposits encroaching into the northern end of the bay. The Holocene incised-valley fill (estuarine facies) underlying Mobile Buy fit well into the conceptual facies model of a microtidal wave-dominated estuary. The model does not fit as well, however, with the rapidly transgressed shelf portion of the incised valley. The down dip section does not contain a clearly identifiable (from seismic profiles) estuarine facies; the valley fill is primarily fluvial and is overlain by marine shoals. In the Mobile River incised valley, the distal portion of the valley was rapidly drowned, allowing the thin estuarine facies to be reworked. The proximal portion was drowned more slowly, leaving the estuarine facies intact. Thus, the single incised valley contains two very different types of fill.

Alabama↗

Influence of near-surface stratigraphy on coastal landslides at Sleeping Bear Dunes National Lakeshore, Lake Michigan, USA

Lake-level change and landslides are primary controls on the development of coastal environments along the coast of northeastern Lake Michigan. The late Quaternary geology of Sleeping Bear Dunes National Lakeshore was examined with high-resolution seismic reflection profiles, ground-penetrating radar (GPR), and boreholes. Based on sequence-stratigraphic principles, this study recognizes ten stratigraphic units and three major unconformities that were formed by late Pleistocene glaciation and postglacial lake-level changes. Locally high sediment supply, and reworking by two regressions and a transgression have produced a complex stratigraphy that is prone to episodic failure. In 1995, a large landslide deposited approximately 1 million m3 of sediment on the lake floor. The highly deformed landslide deposits, up to 18 m thick, extend 3-4 km offshore and unconformably overlie well-stratified glacial and lacustrine sediment. The landslide-prone bluff is underlain by channel-fill deposits that are oriented nearly perpendicular to the shoreline. The paleochannels are at least 10 m deep and 400 m wide and probably represent stream incision during a lake-level lowstand about 10.3 ka B.P. The channels filled with sediment during the subsequent transgression and lake-level highstand, which climaxed about 4.5 ka B.P. As lake level fell from the highstand, the formation of beach ridges and sand dunes sealed off the channel and isolated a small inland lake (Glen Lake), which lies 5 m above the level of Lake Michigan and may be a source of piped groundwater. Our hypothesis is that the paleochannels act as conduits for pore water flow, and thereby locally reduce soil strength and promote slope failure.

Michigan↗

Genesis of the Touissit-Bou Beker Mississippi Valley-type district (Morocco-Algeria) and its relation to the Africa-Europe collision

The Mississippi Valley-type deposits of the Touissit-Bou Beker district are hosted by a 25 m thick sequence of diagenetically and hydrothermally dolomitized carbonate platform rocks of Aalenian-Bajocian age. The sulfide mineralization consists principally of galena and sphalerite and occurs as open-space fillings of voids and moderate to massive replacement of the medium- to coarse-grained host dolostone. Five types of dolomite have been distinguished, two of which (D 1 and D 2 ) are of replacement origin, whereas HD 1 , HD 2 , HD 3 occurring as open-space filling are of hydrothermal affiliation. Main ore controls include stratigraphy and lithology, carbonate dissolution, paleogeography, faults or faulted rocks, and availability of organic matter. Fluid inclusion data, along with Na-Cl-Br leachate, indicate that the ore-forming fluids correspond to evolved NaCl-CaCl 2 -KCl-MgCl 2 basin-derived hot (100&deg; &plusmn; 20&deg;C) saline brines (>20 wt % NaCl equiv) that acquired their high salinities and Ca/Na ratios through evaporation of seawater, and subsequent dolomitization and fluid-rock interactions. Stable isotope data for replacement and hydrothermal dolomites are tightly clustered and overlapping, with &delta; 18 O and &delta; 13 C values from 20.5 to 21.2 and 0.2 to 0.7&permil;, respectively. Similarly, sulfides yield &delta; 34 S values between 11.2 and 1.9&permil;, whereas those corresponding to the nearby Triassic gypsum cluster yield around 14&permil;. Altogether, these isotopic compositions are consistent with a basinal-type fluid with reduced sulfur very likely being derived through thermochemical reduction of dissolved sulfate, resulting in metal precipitation, and carbon of mainly marine Aalenian-Bajocian carbonate origin with a minor biogenic component. 87 Sr/ 86 Sr values of replacement dolostone are similar to those of ore-related hydrothermal dolomites, ranging from 0.70746 to 0.70833 and from 0.70769 to 0.70828, respectively, and are different from those of the Visean rhyodacite (0.71849&ndash;0.72167). Lead isotope ratios ( 206 Pb/ 204 Pb = 18.319&ndash;18.390; 207 Pb/ 204 Pb = 15.620&ndash;15.680; 208 Pb/ 204 Pb = 38.452&ndash;38.650) of sulfides are consistent with Pb being derived from the Visean rhyodacite and associated volcaniclastic rocks. The intimate link between faults and mineralization suggests the strong possibility of brine flow along both ENE-trending regional-scale faults and NW-SW-trending local-scale faults. The data suggest that MVT mineralization was emplaced during the late Neogene-Quaternary (i.e., ca. 15&ndash;0 Ma), possibly as a result of subsurface gravity-driven fluid flow in response to the collision between the African and Eurasian plates.

Touissit-bou Beker District↗

Concealed basalt-matrix diatremes with Cu-Au-Ag-(Mo)-mineralized xenoliths, Santa Cruz Porphyry Cu-(Mo) System, Pinal County, Arizona

The Santa Cruz porphyry Cu-(Mo) system near Casa Grande, Arizona, includes the Sacaton mine deposits and at least five other concealed, mineralized fault blocks with an estimated minimum resource of 1.5 Gt @ 0.6% Cu. The Late Cretaceous-Paleocene system has been dismembered and rotated by Tertiary extension, partially eroded, and covered by Tertiary-Quaternary basin-fill deposits. The mine and mineralized fault blocks, which form an 11 km (~7 miles) by 1.6 km (~1 mile) NE-SW–trending alignment, represent either pieces of one large deposit, several deposits, or pieces of several deposits. The southwestern part of the known system is penetrated by three or more diatremes that consist of heterolithic breccia pipes with basalt and clastic matrices, and subannular tuff ring and maar-fill sedimentary deposits associated with vents. The tephra and maar-fill deposits, which are covered by ~485 to 910 m (~1,600–3,000 ft) of basin fill, lie on a mid-Tertiary erosion surface of Middle Proterozoic granite and Late Cretaceous porphyry, which compose most xenoliths in pipes and are the host rocks of the system. Some igneous xenoliths in the pipes contain bornite-chalcopyrite-covellite assemblages with hypogene grades >1 wt % Cu, 0.01 ounces per ton (oz/t) Au, 0.5 oz/t Ag, and small amounts of Mo (<0.01 wt %). These xenoliths were derived from mineralized rocks that have not been encountered in drill holes, and attest to additional, possibly higher-grade deposits within or subjacent to the known system. The geometry, stratigraphy, and temporal relationships of pipes and tephras, interpreted from drill hole spacing and intercepts, multigenerational breccias and matrices, reequilibrated and partially decomposed sulfide-oxide mineral assemblages, melted xenoliths, and breccia matrix compositions show that the diatremes formed in repeated stages. Initial pulses of basalt magma fractured granite, porphyry, and other crustal rocks during intrusion, transported multi-sized fragments of these rocks upward, and partially melted small fragments. Rapid decompression of magma induced catastrophic devolatilization that ruptured overlying rocks to the surface, and generated fragment-volatile suspensions that abraded conduits into near-vertical cylindrical structures. Fragments entrained in suspensions were milled and sorted, and ejected as basal surge, pyroclastic deposits, and airfall tephra that built tuff rings around vents and filled vent depressions. Comminuted m- to mm-sized fragments of wall rocks in magma and suspensions that remained in conduits solidified as heterolithic breccias. Subsequent pulses of basalt magma ascended through the same conduits, brecciated older heterolithic breccias, devolatilized, and quenched, leaving two or more generations of nested and mingled heterolithic breccias and internal zones of fluidized fragments. Tephra and maar-fill deposits from later eruptions are composed of more hydrous and oxidized minerals than earlier tephras, reflecting a higher proportion of water in transport fluid which, based on fluid inclusion populations in mineralized xenoliths, was saline water and CO 2 . The large vertical extent (~600 m; ~2,000 ft) of basalt matrix in pipes, near-paleosurface matrix vesiculation, and plastically deformed basalt lapilli indicates that diatreme eruptions were predominantly phreatic. Diatreme xenoliths represent crustal stratigraphy and, as in the Santa Cruz system, provide evidence of concealed mineral resources that can guide exploration drilling through cover. Vectors to the source of bornite-dominant xenoliths containing >1% Cu and significant Au and Ag could be determined by refinement of breccia pipe geometries, by reassembly of mineralized fault blocks using modal, chemical, and temporal characteristics of hydrothermal mineral assemblages and fluid inclusions, and by paleodrainage analysis.

Arizona↗

The Chahnaly low sulfidation epithermal gold deposit, western Makran volcanic arc, southeastern Iran

The Chahnaly low-sulfidation epithermal Au deposit and nearby Au prospects are located northwest of the intermittently active Bazman stratovolcano on the western end of the Makran volcanic arc, which formed as the result of subduction of the remnant Neo-Tethyan oceanic crust beneath the Lut block. The arc hosts the Siah Jangal epithermal and Kharestan porphyry prospects, near Taftan volcano, as well as the Saindak Cu-Au porphyry deposit and world-class Reko Diq Cu-Au porphyry deposit, near Koh-i-Sultan volcano to the east-northeast in Pakistan. The host rocks for the Chahnaly deposit include early Miocene andesite and andesitic volcaniclastic rocks that are intruded by younger dacitic domes. Unaltered late Miocene dacitic ignimbrites overlie these rocks. Laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) U-Pb zircon geochronology data yield ages between 21.8 and 9.9 Ma for the acidic-intermediate regional volcanism. The most recent volcanic activity of the Bazman stratovolcano involved extrusion of an olivine basalt during Pliocene to Quaternary times. Interpretation of geochemical data indicate that the volcanic rocks are synsubduction and calc-alkaline to subalkaline. The lack of a significant negative Eu anomaly, a listric-shaped rare earth element pattern, and moderate La/Yb ratios of host suites indicate a high water content of the source magma. Gold and electrum are temporally and spatially related to a series of structurally controlled, 030&deg;-trending, subvertical hydrothermal breccias with chalcedony-adularia that cut porphyritic andesite and andesitic volcaniclastic rocks. Gold is associated with pyrite, a siliceous matrix of hydrothermal breccia, and previously formed vein clasts, as well as with iron oxides and hydroxides in oxidized zones. Rare silver minerals include Ag-bearing electrum and naumannite, iodargyrite, an unnamed silver diiodide, and hessite. Hydrothermal alteration is generally well developed surrounding the ore-bearing hydrothermal breccia. The main types of alteration in the area include an inner ~0.5- to 20-m-thick gold-bearing hydrothermal breccia composed of quartz-chalcedonyadularia-illite-pyrite, a ~5- to 50-m-thick zone of quartz, chalcedony, pyrite, illitic phengite, phengite, illitic muscovite, illite, illitic paragonite, paragonite, muscovite, montmorillonite and, rarely, siderite, and a 30- to 70-m outer propylitic zone of Fe-Mg chlorite, calcite, ankerite, dolomite, epidote, palygorskite, and pyrite. The Chahnaly Au deposit formed during the early stages of magmatism. LA-ICP-MS zircon U-Pb geochronology of host andesite and 40Ar/39Ar dating of two samples of gold-associated adularia show that the ore-stage adularia (19.83 &plusmn; 0.10 and 19.2 &plusmn; 0.5 Ma) is younger, by as much as 1.5 million years, than the volcanic host rock (20.32 &plusmn; 0.4 Ma). Therefore, either hydrothermal activity continued well after volcanism or a second magmatic event rejuvenated hydrothermal activity. This second magmatic event may be related to eruption of porphyritic andesite at ~20.32 &plusmn; 0.40 Ma, which is within error of ~19.83 &plusmn; 0.10 Ma adularia. The new LA-ICP-MS zircon U-Pb host rock and vein adularia 40Ar/39Ar ages suggest that early Miocene magmatism and mineralization in the Bazman area is of a similar age to that of the Saindak porphyry and Tanjeel porphyry center of the giant Reko Diq deposit. This confirms the existence of early Miocene arc magmatism and mineralization along the Iranian part of the Makran volcanic arc. Ore, alteration mineralogy, and alteration patterns indicate that the Chahnaly deposit is a typical low-sulfidation epithermal Au deposit, located in a poorly explored part of the Makran volcanic arc in Iran.

Economic Geology↗

Artificial recharge of productive ground-water aquifers in New Jersey

Artificial recharge by water spreading is practiced in several places in New Jersey. Rates of recharge ranging from 3,000 to 125,000 gallons per acre per day have been measured at the Perth Amboy Water Works, where artificial recharge of the Old Bridge sand, of upper Cretaceous age, has been practiced for more than 40 years. At the Duhernal development, which also draws from the Old Bridge sand, four or five million gallons daily is now derived from artificial recharge. This rate will probably increase with further lowering of the water table near the lake. For many years the Princeton Water Company has pumped water from a stream for recharging the Stockton sandstone, of Triassic age. The Lake Mohawk-Sparta Water Company spreads water underground by means of covered, gravel-filled ditches to recharge a shallow aquifer in its well field. The City of East Orange spreads the water from several small streams over parts of the intake area of the Quaternary beds supplying its wells. The estimated total recharge there is about two million gallons daily. Closely related to artificial recharge are those instances wherein well sites are chosen to take advantage of potential recharge from existing bodies of surface water. At the Borough of Manville no water spreading operations are conducted, but about three quarters of the water from its wells is derived by recharge from the Raritan River. The silting of water spreading areas may impair their effectiveness considerably. In some instances the growth of aquatic vegetation seems to reduce the ill effects of silting.

New Jersey↗

A lithologic-tectonic framework for the metallogenic provinces of California

The lithologic-tectonic framework of California developed principally during Mesozoic time when various terranes of oceanic crust and island-arc crust were accreted to older sialic crust, resulting in westward growth of the continent. Emplacement of great batholithic masses of granitoid rocks cutting all these crustal types also took place during the Mesozoic period. The discrete tectonostratigraphic terranes that resulted from these events and subsequent Tertiary and Quaternary volcanic events are characterized by specific types of metallic mineral deposits or, in some terranes, by the virtual absence of deposits. Lead-silver-zinc replacement-type deposits are common in the Paleozoic carbonate terrane in the eastern part of the state and occur sporadically elsewhere in the miogeoclinal and cratonal terranes but are absent from the oceanic and island-arc terranes. The vast majority of contact metasomatic tungsten deposits, including all the large ones, are in pendants of miogeoclinal rocks in the Sierra Nevada batholith, but the important Atolia deposits reside in granitoid rocks that invade oceanic terrane. Molybdenum distribution closely follows that of tungsten. All the large contact metasomatic iron deposits in California are in craton and miogeoclinal terranes, but sparse small deposits of this type also occur in island-arc terranes of the northern Sierra Nevada and eastern Klamath Mountains. Lode gold deposits, although widely scattered, show a marked preference for oceanic and island-arc terranes that have been invaded by granitoid plutons. All the major deposits, including late Tertiary bonanza deposits such as Bodie, are in such terranes. It appears that magmatic processes were responsible for mobilizing and transporting the gold, but the metal was perhaps derived from the eugeosynclinal rocks, notably the mafic volcanics. Most mercury deposits are found in the Coast Ranges, where they commonly occur in silica-carbonate rock, an alteration product of serpentinite. The deposits appear to be spatially related to the Coast Range thrust, and the source of the mercury may have been sedimentary rocks of the underlying Franciscan assemblage. Epigenetic mineralization occurred at several different times during the Mesozoic, and again during Miocene and Pliocene time. The timing of mineralization events and the distribution of various deposit types indicate that no broad-scale zoning of epigenetic deposits exists around the Sierra Nevada batholith.Syngenetic deposits are represented mainly by massive sulfides, chert-associated manganese, and chromite. The massive sulfide deposits, with one exception, are restricted to island-arc terranes, and nearly all of these deposits are in silicic volcanic rocks. They are interpreted to be syngenetic with the enclosing rocks, although some redistribution of metals may have occurred after the original deposition. The deposits occur in volcanic sequences of at least five different ages ranging from Early Devonian to Late Jurassic or Early Cretaceous and, along with their enclosing rocks, were probably formed at some distance from their present sites. Chert-associated manganese deposits occur mainly in exotic blocks of oceanic crust in melange and probably formed in fairly deep ocean environments. Chromite is confined to ultramafic rock, much of which occupies suture zones separating various accreted terranes.

Economic Geology↗