SEARCH · Geology Reports

Results for “Northwest Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82Linked to original sources

USGS1960

Gravity survey in part of the Snake River Plain, Idaho — A preliminary report

During the early summer of 1959, a total of 1,187 gravity stations were occupied on the western part of the Snake River plain in Idaho. An area of 2,000 square miles extending from Glenns Ferry, Idaho, to Caldwell, Idaho, was covered with a station density of one station per two square miles. An additional 1,200 square miles of surrounding area, mainly from Caldwell, Idaho, to the Oregon-Idaho state line, was covered with a density of one station per seven square miles. The mean reproducibility of the observed gravities of these stations was 0.05 milligal, with a maximum discrepancy of 0.2 milligal. Gravity data were reduced to simple Bouguer values using a combined free-air and Bouguer correction of 0.06 milligal per foot. The only anomalies found with closure in excess of 10 milligals are two elongated highs, orientated northwest-southeast, with the northwestern high offset to the northeast by 10 miles. The smaller of these highs extends from Meridian, Idaho, to Nyssa, Oregon, and the larger extends from Swan Falls, Idaho, to Glenns Ferry, Idaho. The maximum value recorded is a simple Bouguer value of -66.5 milligals with respect to the International Ellipsoid. Gradients on the sides of these highs are largest on the northeast sides, reaching six milligals per mile in places. Graticule interpretations of a profile across the southeastern high using a density contrast of 0.3 gm per cubic centimeter indicate an accumulation of lava reaching a thickness of at least 28,000 feet. The Snake River investigation was made for the purpose of searching out, defining, and interpreting gravity anomalies present on the western part of the Snake River lava plain in Idaho. In particular, it was desired to further define gradients associated with the gravity high shown by the regional work of Bonini and Lavin (1957). It was not planned to cover any specific area, but rather to let the observed anomalies determine the course of the field work. The study was undertaken as part of a project on Volcanism and Crustal Deformation, supervised by L. C. Pakiser of the U.S. Geological Survey. Professor Rodgers of the Geophysics Department of the Colorado School of Mines acted as an advisor.

Idaho↗

USGS1997

Fish communities of fixed sites in the Western Lake Michigan Drainages, Wisconsin and Michigan, 1993-95

Fish communities were surveyed at 20 wadable stream sites during 1993-95 as part of the U.S. Geological Survey's (USGS) National Water- Quality Assessment (NAWQA) Program's assessment of the Western Lake Michigan Drainages. Part of the NAWQA design is to incorporate ecological data into an overall environmental assessment. Collection of fish-community data was part of this ecological assessment. The Western Lake Michigan Drainages study area is located in eastern Wisconsin and parts of the Upper Peninsula of Michigan. To isolate the effects of individual factors on stream quality, the study area was subdivided into 28 environmental settings, or relatively homogeneous units (RHUs), on the basis of land use/land cover, texture of surficial deposits, and bedrock geology. A fixed monitoring site was established on a wadable stream within 8 of these RHUs to determine the status and trends of water quality in a representative stream. Water-quality characteristics, ecological- community data, and stream-habitat factors were measured at these sites during 1993- 95. Fish communities were sampled at the 8 wadable fixed sites once a year during 1993-95. At three of these sites, multiple-reach samples were collected in 1994 to determine within-site variation. Fish communities also were sampled at an additional 12 sites, 11 in 1993 and one in 1995, within the 6 largest RHUs. The sites, 1-3 per each of the 6 RHUs, were located on streams with drainage basins of similar size as the fixed sites within the same RHUs. A total of 44 fish species from 12 families were collected at the 20 sites. The family with the most species represented were the minnows. The number of species per site ranged from one at a small urban site (Lincoln Creek) in 1995 to 21 at an agricultural site (North Branch Milwaukee River) in 1995. The number of individuals collected in one sampling pass ranged from 21 at a stream in the forested northwest part of the study area (Peshekee River) in 1995 to 498 at an agricultural site (East River) in 1995. White sucker (Catostomus commersoni) were collected at 17 sites, the most of any species. Species that are indicative of a coldwater environment were collected at 12 sites. Detrended correspondence analysis (DCA) of multiple-reach and multiple-year data indicated that species composition at each of these sites were fairly consistent between reaches and years. Thus, for simplicity, most analyses were done using 1993 data only. Index of Biotic Integrity (IBI) scores on 1993 data ranged from very poor at a channelized urban site to excellent at 3 sites; 2 in primarily agricultural areas and 1 in a forested area. Seven sites each scored good or fair, and two sites scored poor. Sites with multiple-year or multiple-reach data did not vary significantly within the error factor of the IBI. DCA of fish-community data from 19 sites indicated that coldwater sites were tightly grouped, whereas warmwater sites showed a larger gradient. This was expected, given the potential for greater diversity among warmwater sites. Fixed sites were shown to be representative of the study area as a whole, while specific fish communities could not be attributed to particular RHUs. Cluster analysis revealed two major groups of sites and two outlier sites. The two groups represented coldwater and warmwater streams, while the outlier sites were the urban site and a species- rich site with high biotic integrity that drains primarily agricultural land. Canonical correspondence analysis (CCA) revealed that soil credibility was a significant predictor of species composition. Though not statistically significant, land use, soil permeability, and bedrock permeability also were indicated as predictors of fish-species composition by CCA.

Michigan, Wisconsin↗

USGS2007

Upper cretaceous microbial petroleum systems in north-central Montana

Cenomanian to Campanian rocks of north-central Montana contain shallow economic accumulations of dry natural gas derived from microbial methanogenesis. The methanogens utilized carbon dioxide derived from organic matter in the marginal marine sediments and hydrogen from in situ pore water to generate methane. The most recent USGS assessment of the shallow gas resources of eastern Montana used a petroleum systems approach, identifying the critical components of a petroleum system (source rock, reservoir rock, seal rock, and trap) and their temporal relationships. As a part of this effort, geochemical data from natural gas wells and associated formation waters were used to identify two microbial gas systems and the timing of methanogenesis. Two microbial gas families are identified in north-central Montana based on stable carbon isotope and gas composition. The Montana Group gas family has heavier δ 13 C methane values, slightly lighter δD methane values, and a lower carbon dioxide and nitrogen content than the Colorado Group gas family. The two gas families may reflect, in part, the source rock depositional environments, with the Colorado Group rocks representing a more offshore marine depositional environment and the Montana Group rocks representing proximal marine, deltaic and nonmarine depositional environments. Assuming the gas families reflect only source rock characteristics, two microbial petroleum systems can be defined. The first petroleum system, called the Colorado Group microbial gas system, consists of Colorado Group rocks with the shales in the Belle Fourche Formation, Greenhorn Formation, and the Carlile Shale as the presumed source rocks and the interbedded Phillips and Bowdoin sandstones and the Greenhorn Formation limestones as reservoirs. The second petroleum system, called the Montana Group microbial gas system, consists of the Montana Group rocks that include the Gammon Shale and possibly the Claggett Shale as source rocks and the Eagle Sandstone and the Judith River Formation as reservoirs. The Niobrara Formation is tentatively placed in the former system. The geographic extent of the two microbial systems is much larger than the study area and includes an area at least from the Alberta basin to the northwest to the Powder River basin to the southeast. Upper Cretaceous microbial gas accumulations have been recognized along these basin margins at burial depths less than 3000 ft, but have not been recognized within the deeper parts of the basins because subsequent charge of thermogenic oil and gas masks the preexisting microbial gas accumulations. Methanogenesis began soon after the deposition (early-stage methanogenesis) of the Cenomanian to Campanian source sediments, and was either sustained or rejuvenated by episodic meteoric water influx until sometime in the Paleogene. Methanogenesis probably continued until CO 2 and hydrogen were depleted or the pore size was compacted to below tolerance levels of the methanogens. The composition of the Montana and Colorado Group gases and coproduced formation water precludes a scenario of late-stage methanogenesis like the Antrim gas system in the Michigan basin. Some portion of the methane charge was originally dissolved in the pore waters, and subsequent reduction in hydrostatic pressure caused the methane to exsolve and migrate into local stratigraphic and structural traps. The critical moment of the microbial gas systems is this timing of exsolution rather than the time of generation (methanogenesis). Other studies suggest that the reduction in hydrostatic pressure may have been caused by multiple geologic events including the lowering of sea level in the Late Cretaceous, and subsequent uplift and erosion events, the youngest of which began about 5 Ma.

Montana↗

USGS2003

Applied geochemistry, geology and mineralogy of the northernmost Carlin trend, Nevada

Investigations in the northernmost Carlin trend were undertaken to advance understanding of the geochemical signatures and genesis of precious metal deposits in the trend . Two fundamental geologic relationships near the trend significantly affect regional geochemical distributions: a remarkably intact lower Paleozoic stratigraphic sequence of siliceous rocks in the upper plate of the middle Paleozoic Roberts Mountains thrust, and the widespread repetition of rocks high in the upper plate during late Paleozoic thrusting that thickens the cover above mineralized rock in the lower plate. A compilation of previously published chemical analyses of 440 stream sediment samples and 115 rocks from two 7 1/2-minute quadrangles, as well as new chemical analyses of approximately 1,000 drill core samples in a 1,514 m (4,970 ft) hole through the Rodeo Creek deposit were used to construct three-dimensional element distribution models that highlight metal zonation in the mineralized systems. The Rodeo Creek deposit comprises deep Ag base-metal ± Au-mineralized rock below the Roberts Mountains thrust and contains an unusually high Ag/Au ratio greater than 30. Stacked geochemical halos related to the deposit are confined to the lower plate of the Roberts Mountains thrust and include two horizons of Hg, Cu, and Zn anomalies-as much as 180 m above the deposit-that mostly result from mercurian sphalerite. Extremely subtle indications of mineralization in the upper plate of the Roberts Mountains thrust above the deposit include arsenopyrite overgrowths on small pyrite crystals in 50- to 75-μm-wide clay-carbonate veinlets that lack alteration halos, arsenical rims on small disseminated crystal of recrystallized diagenetic pyrite, and partial replacement of diagenetic pyrite by tennantite. Some of these minerals contain anomalously high Au. However, these As-(Au)-bearing rocks most likely represent another locus of largely untested mineralized rock rather than distal halos related to either the Rodeo Creek or the nearby Dee and Storm gold deposits. Application of micromineralogic techniques helped to identify mineral assemblages that are specific to mineralization and provided an empirical foundation for interpretations of geochemical halos in the Carlin trend . District-scale geochemical patterns of several elements in stream sediments and surface rocks coincide with the northernmost Carlin trend and can be used to explore for Carlin -type deposits. Concentrations of elevated As and Sb in stream sediments (as much as 54 ppm As) have northwest-elongate lobate patterns that clearly outline the trend across a width of approximately 4 km. Arsenic contents of exposed rocks (as much as 90 ppm As) strongly correlate with As contents of derivative stream sediments, and rock contents of Sb show a somewhat lesser but nonetheless strong and similar correspondence. Factor analysis of stream-sediment data shows that those factor scores that are correlated with As, Sb, Au, and Pb also are high along the trend and suggest that mineralized rocks may be present. Although As was not detected by scanning electron microscope-energy dispersive spectrometer (SEM-EDS) studies in heavy mineral concentrates of high-As stream sediments in the Carlin trend , X-ray absorption near-edge spectra (XANES) of selected light fractions of stream sediment samples indicate that Al-bearing phases, such as gibbsite, amorphous Al oxyhydroxides, or aluminosilicate clay minerals host most of the As(V). The best fit, visually and in terms of the lowest residual, was obtained by a model compound of As(V) sorbed to gibbsite. Thus, most As in stream sediments derived from altered rock within the Carlin trend apparently is contained in light fractions. The geochemical character of young, unconsolidated, postmineral deposits that cover mineralized rocks on the Carlin trend partly results from mineralized sources along the trend . Concentration of As in the Miocene Carlin Formation shows an exceptionally well developed progressive increase to about 30 ppm As as altered rock surrounding the trend is approached. Mineralized and/or altered rock fragments probably have been shed directly into the sedimentary basin of the Carlin Formation, and migration of As, now fixed as As(V), also may have occurred in the supergene environment after material was recycled out of the Carlin Formation and into present-day gulleys.

Nevada↗

USGS2006

Ground-water-quality data in Pennsylvania: A compilation of computerized [electronic] databases, 1979-2004

This study, by the U.S. Geological Survey (USGS) in cooperation with the Pennsylvania Department of Environmental Protection (PADEP), provides a compilation of ground-water-quality data for a 25-year period (January 1, 1979, through August 11, 2004) based on water samples from wells. The data are from eight source agencies唯orough of Carroll Valley, Chester County Health Department, Pennsylvania Department of Environmental Protection-Ambient and Fixed Station Network, Montgomery County Health Department, Pennsylvania Drinking Water Information System, Pennsylvania Department of Agriculture, Susquehanna River Basin Commission, and the U.S. Geological Survey. The ground-water-quality data from the different source agencies varied in type and number of analyses; however, the analyses are represented by 12 major analyte groups:biological (bacteria and viruses), fungicides, herbicides, insecticides, major ions, minor ions (including trace elements), nutrients (dominantly nitrate and nitrite as nitrogen), pesticides, radiochemicals (dominantly radon or radium), volatile organic compounds, wastewater compounds, and water characteristics (dominantly field pH, field specific conductance, and hardness). A summary map shows the areal distribution of wells with ground-water-quality data statewide and by major watersheds and source agency. Maps of 35 watersheds within Pennsylvania are used to display the areal distribution of water-quality information. Additional maps emphasize the areal distribution with respect to 13 major geolithologic units in Pennsylvania and concentration ranges of nitrate (as nitrogen). Summary data tables by source agency provide information on the number of wells and samples collected for each of the 35 watersheds and analyte groups. The number of wells sampled for ground-water-quality data varies considerably across Pennsylvania. Of the 8,012 wells sampled, the greatest concentration of wells are in the southeast (Berks, Bucks, Chester, Delaware, Lancaster, Montgomery, and Philadelphia Counties), in the vicinity of Pittsburgh, and in the northwest (Erie County). The number of wells sampled is relatively sparse in south-central (Adams, Cambria, Cumberland, and Franklin Counties), central (Centre, Indiana, and Snyder Counties), and north-central (Bradford, Potter, and Tioga Counties) Pennsylvania. Little to no data are available for approximately one-third of the state. Water characteristics and nutrients were the most frequently sampled major analyte groups; approximately 21,000 samples were collected for each group. Major and minor ions were the next most-frequently sampled major analyte groups; approximately 17,000 and 12,000 samples were collected, respectively. For the remaining eight major analyte groups, the number of samples collected ranged from a low of 307 samples (wastewater compounds) to a high of approximately 3,000 samples (biological). The number of samples that exceeded a maximum contaminant level (MCL) or secondary maximum contaminant level (SMCL) by major analyte group also varied. Of the 2,988 samples in the biological analyte group, 53 percent had water that exceeded an MCL. Almost 2,500 samples were collected and analyzed for volatile organic compounds; 14 percent exceeded an MCL. Other major analyte groups that frequently exceeded MCLs or SMCLs included major ions (17,465 samples and a 33.9 percent exceedence), minor ions (11,905 samples and a 17.1 percent exceedence), and water characteristics (21,183 samples and a 20.3 percent exceedence). Samples collected and analyzed for fungicides, herbicides, insecticides, and pesticides (4,062 samples), radiochemicals (1,628 samples), wastewater compounds (307 samples), and nutrients (20,822 samples) had the lowest exceedences of 0.3, 8.4, 0.0, and 8.8 percent, respectively.

Pennsylvania↗

USGS2002

Hydrogeology and extent of saltwater intrusion on Manhasset Neck, Nassau County, New York

Manhasset Neck, a peninsula on the northern shore of Long Island, N.Y., is underlain by unconsolidated deposits that form a sequence of aquifers and confning units. Ground water at several public-supply wells has been affected by the intrusion of saltwater from the surrounding embayments (Manhasset Bay, Long Island Sound, Hempstead Harbor). Twenty-two boreholes were drilled during 1992-96 for the collection of hydrogeologic, geochemical, and geophysical data to delineate the subsurface geology and the extent of saltwater intrusion within the peninsula. A series of continuous high-resolution seismic- reflection surveys was completed in 1993 and 1994 to delineate the character and extent of the hydrogeologic deposits beneath the embayments surrounding Manhasset Neck. The new drill-core data indicate two hydrogeologic units--the North Shore aquifer and the North Shore confining unit--where the Lloyd aquifer, Raritan confining unit, and the Magothy aquifer have been completely removed by glacial erosion. Water levels at selected observation wells were measured quarterly throughout the study. These data, and continuous water-level records, indicate that (1) the upper glacial (water-table) and Magothy aquifers are hydraulically connected and that their water levels do not respond to tidal fluctuations, and (2) the Lloyd and North Shore aquifers also are hydraulically connected, but their water levels do respond to pumping and tidal fluctuations. Offshore seismic-reflection surveys in the surrounding embayments, and drill-core samples, indicate at least four glacially eroded buried valleys with subhorizontal, parallel reflectors indicative of draped bedding that is interpreted as infilling by silt and clay. The buried valleys (1) truncate the surrounding coarse-grained deposits, (2) are asymmetrical and steep sided, (3) trend northwest-southeast, (4) are 2 to 4 miles long and about 1 mile wide, and (5) extend to more than 400 feet below sea level. Water from 12 public-supply wells screened in the Magothy and upper glacial aquifers contained volatile organic compounds in concentrations above the New York State Department of Health Drinking Water maximum contaminant levels, as did water from one public- supply well screened in the Lloyd aquifer and from two observation wells screened in the upper glacial aquifer. Five distinct areas of saltwater intrusion have been delineated in Manhasset Neck; three extend into the Lloyd and North Shore aquifers, and two extend into the upper glacial and Magothy aquifers. Borehole-geophysical-logging data indicate that several of these saltwater wedges range from a few feet to more than 125 feet in thickness and have sharp freshwater-saltwater interfaces, and that chloride concentrations within these wedges in 1997 ranged from 102 to 9,750 milligrams per liter. Several public-supply wells have either been shut down or are currently being affected by these saltwater wedges. Data show active saltwater intrusion in at least two of the wedges.

New York↗

USGS2003

Preliminary geologic map of the Winchester 7.5' quadrangle, Riverside County, California

The Winchester quadrangle is located in the northern part of the Peninsular Ranges Province within the central part of the Perris block, a relatively stable, rectangular in plan view, area located between the Elsinore and San Jacinto fault zones (see location map). The quadrangle is underlain by Cretaceous and older basement rocks. Cretaceous plutonic rocks are part of the composite Peninsular Ranges batholith, which indicates wide variety of granitic rocks, ranging from granite to gabbro. Parts of three major plutonic complexes are within the quadrangle, the Lakeview Mountains pluton, the Domenigoni Valley pluton and the Paloma Valley ring complex. In the northern part of the quadrangle is the southern part of the Lakeview Mountains pluton, a large composite body, most of which lies in the quadrangle to the north. In the center part of the quadrangle is the eastern part of the Domenigoni Valley pluton, which consists of massive biotite-hornblende granodiorite and tonalite; some tonalite in the southern part of the pluton has a relatively pronounced foliation produced by oriented biotite and hornblende. Common to abundant equant-shaped, mafic inclusions occur through out the pluton except in the outermost part where inclusions are absent. The pluton was passively emplaced by piecemeal stoping of a variety of older rocks and the eastern contact is well exposed in the quadrangle. Associated with the Domenigoni Valley pluton is a swarm of latite dikes; the majority of these dikes occur in the Winchester quadrangle, but they extend into the Romoland quadrangle to the west. The latite dikes intrude both the pluton and adjacent metamorphic rocks, most are foliated, and most have a well developed lineation defined by oriented biotite and/or hornblende crystals. Dikes intruding the pluton were emplaced in northwest striking joints; and dikes intruding the metamorphic rocks were emplaced along foliation planes. In the eastern part of the quadrangle a Cretaceous age suture juxtaposes low-metamorphic grade Mesozoic rocks against high-metamorphic grade gneissic-textured Mesozoic rocks. Juxtaposition occurred when the high-metamorphic grade rocks were at upper amphibolite grade temperatures, and produced a steep thermal gradient in the low-metamorphic grade Mesozoic rocks. Age of suturing and attendant metamorphism, based on metamorphic mineral ages, is about 100 Ma (L. Snee, personal communication, 2002). The suture zone appears to vary in thickness, and includes within it a number of metadunite bodies and related rocks. Prebatholithic rocks of Mesozoic age include a wide variety of sedimentary rocks of greenschist or lower metamorphic grade, in the western and central part of the quadrangle, and upper amphibolite grade near the eastern edge of the quadrangle. The metamorphic grade increases from greenschist to upper amphibolite grade over a distance of less than two miles; andalusite and sillimanite isograds are closely spaced near the suture. Metamorphism was Buchan type of relatively high temperature and relatively low pressure (Schwarcz, 1969). Common lithologies of the low metamorphic grade suite include phyllite, lithic greywacke, impure quartzite, meta-arkose, and interlayered quartzite and phyllite. Most of the layering and foliation in the metamorphic rocks is the result of intense structural transposition. Relic bedding appears to be restricted to very local occurrences in hinges of slip folds. The upper amphibolite grade, gneissic-textured Mesozoic rocks consist of sillimanite-biotite gneiss, black amphibolite, and impure quartzite. Anatectic gneiss containing igneous textured segregations of quartz and feldspar is commonly inter leaved with biotite gneiss.

Open-File Report↗

USGS2020

Geology of the Trout Rock caves (Hamilton Cave, Trout Cave, New Trout Cave) in Pendleton County, West Virginia (USA), and implications regarding the origin of maze caves

The Trout Rock caves (Hamilton Cave, Trout Cave, New Trout Cave) are located in a hill named Cave Knob that overlooks the South Branch of the Potomac River in Pendleton County, West Virginia (U.S.A). The geologic structure of this hill is a northeasttrending anticline, and the caves are located at different elevations primarily along the contact between the Devonian New Creek Limestone (Helderberg Group) and the overlying Devonian Corriganville Limestone (Helderberg Group). The entrance to New Trout Cave (Stop 1) is located on the east flank of Cave Knob anticline at an elevation of 585 m (1,920 ft) relative to sea level, or 39 m (128 ft) above the modern river. Much of the cave consists of passages that extend to the northeast along strike, and many of these passages have developed along primary joints that trend N40E or secondary joints that trend N40W. Sediments in New Trout Cave include mud and sand (some of which was mined for nitrate during the American Civil War), as well as large boulders in the front part of the cave. Gypsum crusts are present in a maze section of the cave ~213 to 305 m (700 to 1,000 ft) from the cave entrance. Excavations in New Trout Cave have produced vertebrate fossils of Rancholabrean age, ~300,000 to 10,000 years Before Present (BP). The entrance to Trout Cave (Stop 2) is located on the east flank of Cave Knob anticline ~100 m (328 ft) northwest of the New Trout Cave entrance at an elevation of 622 m (2,040 ft) relative to sea level, or 76 m (249 ft) above the modern river. Much of the cave consists of passages that extend to the northeast along strike, although a small area of network maze passages is present in the western portion of Trout Cave that is closest to Hamilton Cave. Many of the passages of Trout Cave have developed along primary joints that trend N40E or secondary joints that trend N40W. Sediments in Trout Cave include mud (also mined for nitrate during the American Civil War), as well as large boulders in the front part of the cave. Excavations in the upper levels of Trout Cave have produced vertebrate fossils of Rancholabrean age (~300,000 to 10,000 years BP), whereas excavations in the lower levels of the cave have produced vertebrate fossils of Irvingtonian age (~1,810,000 to 300,000 years BP). The entrance to Hamilton Cave (Stop 3) is located along the axis of Cave Knob anticline ~165 m (540 ft) northwest of the Trout Cave entrance at an elevation of 640 m (2,100 ft) relative to sea level, or 94 m (308 ft) above the modern river. The front (upper) part of Hamilton Cave has a classic network maze pattern that is an angular grid of relatively horizontal passages, most of which follow vertical or near-vertical primary joints that trend N40W and N50W and secondary joints that trend N60W and N80E. This part of the cave lies along the axis of Cave Knob anticline. In contrast, the passages in the back (lower) part of Hamilton Cave lie along the west flank of Cave Knob anticline at ~58 to 85 m (190 to 279 ft) above the modern river. These passages do not display a classic maze pattern, and instead they may be divided into the following two categories: (1) longer northeast-trending passages that are relatively horizontal and follow the strike of the beds; and (2) shorter northwest-trending passages that descend steeply to the west and follow the dip of the beds. Sediments in Hamilton Cave include mud (which was apparently not mined for nitrate during the American Civil War), as well as large boulders in the front part of the cave. Gypsum crusts are present along passage walls of the New Creek Limestone from the Slab Room to the Airblower. Excavations in the front part of Hamilton Cave (maze section) have produced vertebrate fossils of Irvingtonian age (~1,810,000 to 300,000 years BP). The network maze portions of Hamilton Cave are interpreted as having developed at or near the water table where water did not have a free surface in contact with air and where the following conditions were present: (1) Location on or near the axis of an anticline (the location of the greatest amount of flexure); (2) Abundant vertical or near vertical joints, which are favored by location in the area of greatest flexure and by a lithologic unit (chert-rich limestone) that is more likely to experience brittle rather than ductile deformation; (3) Widening of joints to enhance ease of water infiltration, favored by location in area of greatest amount of flexure; and (4) Dissolution along nearly all major joints to produce cave passages of approximately the same size (which would most likely occur via water without a free surface in contact with air). The cave passages that are located along anticline axes and along strike at the New Creek-Corriganville contact are interpreted as having formed initially during times of base level stillstand at or near the water table where water did not have a free surface in contact with air and where the water flowed along the hydraulic gradient at gentle slopes. Under such conditions, dissolution occurred in all directions to produce cave passages with relatively linear wall morphologies. In the lower portions of some of the along-strike passages, the cave walls have a more sinuous (meandering) morphology, which is interpreted as having formed during subsequent initial base level fall as cave development continued under vadose conditions where the water had a free surface in contact with air, and where water flow was governed primarily by gravitational processes. Steeply inclined cave passages that are located along dip at the New Creek-Corriganville contact are interpreted as having formed during subsequent true vadose conditions (after base level fall). This chronology of base level stasis (with cave development in the phreatic zone a short distance below top of water table) followed by base level fall (with cave development in the vadose or epiphreatic zone) has repeated multiple times at Cave Knob during the past ~4 to 3 million years, resulting in multiple cave passages at different elevations, with different passage morphologies, and at different passage locations with respect to strike and dip.

West Virginia↗

USGS1952

Stratigraphic sections of the Phosphoria in Montana, 1947-48

The U. S. Geological Survey has recently measured and sampled the Phosphoria formation at many localities in Montana and other western states. These data will not be fully synthesized and analyzed for several years, but segments of the data, accompanied by little or no interpretation, will be published as preliminary reports as they are assembled. This report, which contains abstracts of many of the sections measured in southwestern Montana (pl. 1), is one of this series. The field and laboratory procedures adopted in these investigations are described rather fully in a companion report (McKelvey and others, 1952). Many people have taken part in this investigation. The program of which this work is a part was organized by V. E. McKelvey. J. G. Evans, J. E. Joyce, J. A. Kelleher, R. L. Konizeski, J. A. Mann, R. L. Parker, J. E Smedley, L. A. Thomas, and W. H. Wilson participated in the description of strata and collection of samples referred to in this report. The laboratory preparation of samples for chemical analysis was done in Denver, Colo., under the direction of W. P. Huleatt. All the P 2 O 5 , F, V 2 O 5 , and acid-insoluble analyses were made for the Survey by the U. S. Bureau of Mines at the Northwest Electrodevelopment Laboratory, Albany, Oreg., under the direction of S. M. Shelton and M. L. Wright. The Al 2 O 3 , Fe 2 O 3 , and loss-on-ignition analyses were about equally distributed between the Bureau of Mines and the Trace Elements Section laboratory of the Survey in Washington, D. C., under the direction of J. C. Rabbit by chemists I. Barlow, A. Caemmerer, J. Greene, N. Guttag, and E. H. Humphrey. The spectrographic analyses were made by D. M. Mortimer, of the Bureau Mines in Albany, and the oil-shale analyses were made by the Bureau of Mines Petroleum and Oil-Shale Experiment Station at Laramie, Wyo. Compilation of the data has been largely by R. P. Sheldon and F. D. Frieske. Organization of the tabular data has been largely by Anita Cozzetto.

Montana↗

USGS2023

Fluvial delivery and wave resuspension of sediment in a sheltered, urbanized Pacific Northwest estuary

The sequence and timing of sediment delivery and redistribution in coastal systems is important for shoreline stability, ecosystem services, and remediation planning. In temperate estuaries, understanding the role of fluvial sediment delivery and dispersal relative to wind and wave remobilization processes is particularly important to address the fate of contaminants, many of which adsorb to fine particles, and to assess changes in coastal systems under projected changes in climate. Here we present an integrated analysis of observations at multiple timescales to evaluate sediment dynamics and the sedimentary coupling between fluvial and oceanographic processes within Bellingham Bay, Washington, USA, an urban estuary. Time-series data of currents, waves, and turbidity at four moorings along with geochemical data from grab samples and cores of seabed sediment from across the bay are contrasted with the dynamics of the Nooksack River, its fluvial sediment source. Even during large (5-yr return interval) river-flood events, water-column suspended-sediment concentration (SSC) near the bed on the outer delta topset was not correlated with Nooksack River runoff and was instead closely correlated with local wind-wave height. In contrast, near-surface SSC was strongly correlated with fluvial discharge, suggesting intense water-column suspended-sediment stratification during flood events. Grain-size and geochemical ( 7 "> 7 Be and excess 210 "> 210 Pb) results from seabed-sediment samples and historical bathymetric measurements of the subaqueous Nooksack River delta reveal spatial gradients of fluvial and wave influence and sediment-accumulation rates. Analysis of historical bathymetric surveys of the Nooksack River delta combined with the geochemical data reveal that about 75% of the fluvial sediment load can be accounted for in the Bellingham Bay receiving system. Studies of this type in urbanized coastal settings can help address ecological and geological questions regarding the risks from contaminants associated with fine-grained sediment, predict longer-term delta morphological evolution, and inform managers planning future coastal restoration efforts

Washington↗

USGS1998

Near-surface structural model for deformation associated with the February 7, 1812, New Madrid, Missouri, earthquake

The February 7, 1812, New Madrid, Missouri, earthquake (M [moment magnitude] 8) was the third and final large-magnitude event to rock the northern Mississippi Embayment during the winter of 1811–1812. Although ground shaking was so strong that it rang church bells, stopped clocks, buckled pavement, and rocked buildings up and down the eastern seaboard, little coseismic surface deformation exists today in the New Madrid area. The fault(s) that ruptured during this event have remained enigmatic. We have integrated geomorphic data documenting differential surficial deformation (supplemented by historical accounts of surficial deformation and earthquake-induced Mississippi River waterfalls and rapids) with the interpretation of existing and recently acquired seismic reflection data, to develop a tectonic model of the near-surface structures in the New Madrid, Missouri, area. This model consists of two primary components: a north-northwest–trending thrust fault and a series of northeast-trending, strike-slip, tear faults. We conclude that the Reelfoot fault is a thrust fault that is at least 30 km long. We also infer that tear faults in the near surface partitioned the hanging wall into subparallel blocks that have undergone differential displacement during episodes of faulting. The northeast-trending tear faults bound an area documented to have been uplifted at least 0.5 m during the February 7, 1812, earthquake. These faults also appear to bound changes in the surface density of epicenters that are within the modern seismicity, which is occurring in the stepover zone of the left-stepping right-lateral strike-slip fault system of the modern New Madrid seismic zone.

Missouri↗

USGS2014

Dissolved-solids sources, loads, yields, and concentrations in streams of the conterminous United States

Recent studies have shown that excessive dissolved-solids concentrations in water can have adverse effects on the environment and on agricultural, domestic, municipal, and industrial water users. Such effects motivated the U.S. Geological Survey’s National Water Quality Assessment Program to develop a SPAtially-Referenced Regression on Watershed Attributes (SPARROW) model that has improved the understanding of sources, loads, yields, and concentrations of dissolved solids in streams of the conterminous United States. Using the SPARROW model, long-term mean annual dissolved-solids loads from 2,560 water-quality monitoring stations were statistically related to several spatial datasets that are surrogates for dissolved-solids sources and land-to-water delivery processes. Specifically, sources in the model included variables representing geologic materials, road deicers, urban lands, cultivated lands, and pasture lands. Transport of dissolved solids from these sources was modulated by land-to-water delivery variables that represent precipitation, streamflow, soil, vegetation, terrain, population, irrigation, and artificial drainage characteristics. Where appropriate, the load estimates, source variables, and transport variables were statistically adjusted to represent conditions for the base year 2000. The nonlinear least-squares estimated SPARROW model was used to predict long-term mean annual conditions for dissolved-solids sources, loads, yields, and concentrations in a digital hydrologic network representing nearly 66,000 stream reaches and their corresponding incremental catchments that drain the Nation. Nationwide, the predominant source of dissolved solids yielded from incremental catchments and delivered to local streams is geologic materials in 89 percent of the catchments, road deicers in 5 percent of the catchments, pasture lands in 3 percent of the catchments, urban lands in 2 percent of the catchments, and cultivated lands in 1 percent of the catchments. Whereas incremental catchments with dissolved solids that originated predominantly from geologic sources or from urban lands are found across much of the Nation, incremental catchments with dissolved solids yields that originated predominantly from road deicers are largely found in the Northeast, and incremental catchments with dissolved solids that originated predominantly from cultivated or pasture lands are largely found in the West. The total amount of dissolved solids delivered to the Nation’s streams is 271.9 million metric tons (Mt) annually, of which 194.2 million Mt (71.4%) come from geologic sources, 37.7 million Mt (13.9%) come from road deicers, 18.2 million Mt (6.7%) come from pasture lands, 13.9 million Mt (5.1%) come from urban lands, and 7.9 million Mt (2.9%) come from cultivated lands. Nationwide, the median incremental-catchment yield delivered to local streams is 26 metric tons per year per square kilometer [(Mt/yr)/km 2 ]. Ten percent of the incremental catchments yield less than 4 (Mt/yr)/km 2 , and 10 percent yield more than 90 (Mt/yr)/km 2 . Incremental-catchment yields greater than 50 (Mt/yr)/km 2 mostly occur along the northern part of the West Coast and in a crescent shaped band south of the Great Lakes. For example, the median incremental-catchment yield is 81 (Mt/yr)/km 2 for the Great Lakes, 78 (Mt/yr)/km 2 for the Ohio, and 74 (Mt/yr)/km 2 for the Upper Mississippi water-resources regions. Incremental-catchment yields less than 10 (Mt/yr)/km 2 mostly occur in a wide band across the arid lowland of the interior West that excludes areas along the coast and the extensive, higher mountain ranges. For example, the median incremental-catchment yield is 3 (Mt/yr)/km 2 for the Lower Colorado, 5 (Mt/yr)/km 2 for the Rio Grande, and 8 (Mt/yr)/km 2 for the Great Basin water-resources regions. Predicted incremental loads were cascaded down through the reach network, with loads accumulating from reach to reach. For most stream reaches, the entire incremental load of dissolved solids delivered to the reach was transported to either the ocean or to one of the large streams flowing along the U.S. international boundary without losses occurring along the way. The exceptions to this include streams in the southwestern part of the country, such as the Colorado River, Rio Grande, and streams of internally drained drainages in the Great Basin, where dissolved-solids loads decreased through streamflow diversion for off-stream use, or by infiltration through the streambed. Long-term mean annual flow-weighted concentrations were derived from the predicted accumulated-load and stream-discharge data. Widespread low concentrations, generally less than 100 milligrams per liter (mg/L), occur in many reaches of the New England, South Atlantic-Gulf, and Pacific Northwest water-resources regions as a result of moderate dissolved-solids yields and high runoff rates. Widespread moderate concentrations, generally between 100 and 500 mg/L, occur in many reaches of the Great Lakes, Ohio, and Upper Mississippi River water-resources regions. Whereas dissolved-solids yields are generally high in these regions, runoff rates are also high, which helps moderate concentrations in these regions. Widespread higher concentrations, generally greater than 500 mg/L, occur across a belt of reaches that extends almost continuously from Canada to Mexico in the Midwest, cutting through the Souris-Red-Rainy, Missouri, Arkansas-White-Red, Texas-Gulf, and Rio Grande water-resources regions. Although dissolved-solids yields are moderate to low in these areas, low runoff rates result in the high concentrations for these areas. In 12.6 percent of the Nation’s stream reaches, predicted concentrations of dissolved solids exceed 500 mg/L, the U.S. Environmental Protection Agency’s secondary, nonenforceable drinking water standard. While this standard provides a metric for evaluating predicted concentrations in the context of drinking-water supplies, it should be noted that it only applies to drinking water actually served to customers by water utilities, and it does not apply to all stream reaches in the Nation nor does it apply during times when water is not being withdrawn for use. Exceedance of 500 mg/L is more pronounced in certain water-resources regions than others. For example, about half of the reaches in the Souris-Red-Rainy region have concentrations predicted to exceed 500 mg/L, and between 25 and 37 percent of the reaches in the Missouri, Arkansas-White-Red, Texas-Gulf, Rio Grande, and Lower Colorado regions are predicted to exceed 500 mg/L. Development of stream-load data for use in the SPARROW model also provided long-term temporal trend information in dissolved-solids concentrations at the monitoring stations for their period of record, which was constrained between 1980 and 2009. For the 2,560 monitoring stations used in this study, long-term trends in flow-adjusted dissolved-solids concentrations increased over time at 23 percent of the stations, decreased at 18 percent of the stations, and did not change over time at 59 percent of the stations. Long-term trends show a strong regional spatial pattern where from the western parts of the Great Plains to the West Coast, concentrations mostly either did not change or decreased over time, and from the eastern parts of the Great Plains to the East Coast, concentrations mostly either did not change or increased over time. Results from the trend analysis and from the SPARROW model indicate that, compared to monitoring stations with no trends or decreasing trends, stations with increasing trends are associated with a smaller percentage of the predicted dissolved-solids load originating from geologic sources, and a larger percentage originating from urban lands and road deicers. Conversely, compared to stations with increasing trends or no trends, stations with decreasing trends have a larger percentage of the predicted dissolved-solids load originating from geologic sources and a smaller percentage originating from urban lands and road deicers. Stations with decreasing trends also have larger percentages of predicted dissolved-solids load originating from cultivated lands and pasture lands, compared to stations with increasing trends or no trends.

Scientific Investigations Report↗

USGS1998

A geologic history of the north-central Appalachians, part 3. The Alleghany orogeny

The north-central Appalachians occupy a critical position within the 3000+ km-long Appalachian orogen, lying southwest of the boundary between the central and northern Appalachians (CNAB). The one-billion-year-long history of tectonic activity in eastern Laurentia includes the creation and evolution of the Appalachian orogen during the Paleozoic and the Mesozoic transformation of the orogen into a passive margin during Pangea's disassembly. A most important ingredient in the evolution of the orogen was the Alleghany orogeny, which was driven by the convergence and collision between Laurentia (Laurussia) and West Gondwana (Africa). The Alleghany orogeny in the central and southern Appalachians was a decollement tectonism that involved a larger part of eastern Laurentia than had the previous three orogenies. The fundamental element was a very low-angle thrust (decollement) that originated in mid-crustal levels east of the presently-exposed Appalachians and rose westwardly to progressively higher levels in the upper crust and the supra-crustal Paleozoic section. Alleghany deformation was widely developed in the hanging-wall block (allochthon), primarily in the form of thrust faults and fold-and-thrust structures, both of which splayed upward from the basal decollement. The youngest manifestations of the Alleghany orogeny were northeast-trending strike-slip faults and dextral shear zones in the Piedmont. In the north-central Appalachians, the exposed allochthon consists of two parts: the sedimentary externides (Appalachian Plateau and Valley and Ridge provinces) and the crystalline externides (Reading Prong, Blue Ridge belt, and Piedmont province). Long, thrust-cored anticlines predominate in the sedimentary externides. A widespread layer-parallel shortening preceded the folding; it is largely coaxial with the folding but extends considerably farther to the northwest toward the craton. It is hypothesized that the folding developed in reverse order, sequentially from the northwest to the southeast. The crystalline externides are dominated by low-angle thrust faults and upright folds trending east-northeast. The first-order Valley and Ridge folds on the northwest side acted as a buttress and diverted the crystalline externides rocks north-northwestwardly, onto the topographic low area over the Anthracite region. This thrusting of the crystalline externides caused anthracitization of the coals within the Pennsylvanian rocks there. Metamorphism and magmatism were significant events during the earlier phase of the Alleghany orogeny in the southern Appalachians. Whatever magmatism and medium-to high-grade metamorphism developed in the north-central Appalachians are in the covered internides to the southeast. The Alleghany orogeny of the north-central Appalachians occurred during the Early Permian. Erosion of anticlinal crests probably began as the folds grew, with accumulation of this locally-derived sediment in the intervening synclines. A regional alluvial plain coalesced above the partially-eroded externides structures as erosion of the pre-Alleghany highland and the Alleghany hinterland mountains continued to the southeast, spreading sediment to the northwest. This erosion and northwest transport probably persisted, with diminishing intensity, throughout the remainder of the Permian and into the Mesozoic, and changed only with the beginning of crustal extension during the Late Triassic.

American Journal of Science↗

USGS1953

Geology of the Olds Mountain-Clark Peak area, Juneau and vicinity, Alaska

The area under study lies about ten miles east of Juneau, Alaska, and includes the bedded rocks adjacent to the Coast Range batholith, and intrusive rocks related to the batholith. Deep glaciated valleys and glacially scoured rocks are the major topographic features. The relief is about 3,500 feet, and the highest mountain reaches an altitude of 4,453 feet. Remnants of larger glaciers and perennial snow fields cover many of the higher summits, and glacial erratics at elevations above 3,100 feet attest to a former thick ice cover. The bedded rocks are crystalline schists that locally reach katozonal metamorphic rank as indicated by biotite-garnet-kyanite-sillimanite mineral assemblages. The schists are believed to be dominantly a product of regional metamorphism predating the intrusion of rocks related to the Coast Range batholith. It appears, however, that stresses continued to be active during igneous and granitizing activity accompanying the Coast Range orogeny. The major intrusive bodies are a composite quartz-dioritic batholith and quartz-diorite sills that locally reach a thickness of more than two thousand feet. The sills usually are notably gneissic, and appear to have formed by intrusion rather than replacement. The batholith is a composite body formed by migmatization, replacement, and local fusion. A stressed environment during formation is suggested by a primary gneissic structure. A high quartz content and a paucity of potash feldspars is diagnostic of the intrusive bodies. In addition to the bodies of quartz-diorite, small sills and dikes of gabbro, quartz-pegmatite, and unmetamorphosed diabase intrude the schists. Overturned folds in the schists are nearly isoclinal, and some of the folds are large enough to cause repetition of beds in the Clark Peak schists. Two persistent northwest-trending strike faults of small displacement cut the schists. Two east-trending faults of larger displacement are marked by thick gouge zones locally containing graphite. The rocks near the faults are hydrothermally altered and pyritized, and at least two of the diabase dikes are crushed and hydrothermally altered near one of the northwest-trending faults. Faulting and hydrothermal activity probably continued at least into the early Tertiary.

Open-File Report↗

USGS2017

Archive of bathymetry data collected in South Florida from 1995 to 2015

Description Land development and alterations of the ecosystem in south Florida over the past 100 years have decreased freshwater and increased nutrient flows into many of Florida's estuaries, bays, and coastal regions. As a result, there has been a decrease in the water quality in many of these critical habitats, often prompting seagrass die-offs and reduced fish and aquatic life populations. Restoration of water quality in many of these habitats will depend partly upon using numerical-circulation and sediment-transport models to establish water-quality targets and to assess progress toward reaching restoration targets. Application of these models is often complicated because of complex sea floor topography and tidal flow regimes. Consequently, accurate and modern sea-floor or bathymetry maps are critical for numerical modeling research. Modern bathymetry data sets will also permit a comparison to historical data in order to help assess sea-floor changes within these critical habitats. New and detailed data sets also support marine biology studies to help understand migratory and feeding habitats of marine life. This data series is a compilation of 13 mapping projects conducted in south Florida between 1995 and 2015 and archives more than 45 million bathymetric soundings. Data were collected primarily with a single beam sound navigation and ranging (sonar) system called SANDS developed by the U.S. Geological Survey (USGS) in 1993. Bathymetry data for the Estero Bay project were supplemented with the National Aeronautics and Space Administration's (NASA) Experimental Advanced Airborne Research Lidar (EAARL) system. Data from eight rivers in southwest Florida were collected with an interferometric swath bathymetry system. The projects represented in this data series were funded by the USGS Coastal and Marine Geology Program (CMGP), the USGS South Florida Ecosystem Restoration Project- formally named Placed Based Studies, and other non-Federal agencies. The purpose of the data collection for all these projects was to support one or more of the following scientific aspects: numerical model applications, sea floor change analysis, or marine habitat investigations. This report serves as an archive of processed bathymetry sounding data, digital bathymetric contours, digital bathymetric maps, sea floor surface grids, and formal Federal Geographic Data Committee (FGDC) metadata. Refer to the Abbreviations page for explanations of acronyms and abbreviations used in this report. Since 2006, the USGS St. Petersburg Coastal and Marine Science Center (SPCMSC) assigns a unique identifier or Field Activity Number (FAN) for each field data collection. Projects described in this report conducted prior to 2006 do not have a FAN. Data from the 13 projects presented in this report provided critical hydrographic information to support multiple science projects in south Florida. The projects and the types of sounding data collected are: Florida Bay (1995-1999) - single-beam Lake Okeechobee (2001) - single-beam Tampa Bay (2001-2004) - single-beam Caloosahatchee River (2002)- single-beam Estero Bay to Matlacha Pass and offshore to Wiggins Pass (2003) - single-beam and airborne lidar North and Northwest Forks of the Loxahatchee and Lower St. Lucie Rivers (2003) - single-beam South Charlotte Harbor and offshore Sanibel Island (2003-2004) - single-beam Shark River and Trout Creek (2004) - single-beam and interferometric swath Southwest Florida Rivers (2004) - interferometric swath Offshore from Wiggins Pass to Cape Romano (2005) - single-beam Ten Thousand Islands (2009) - single-beam Lemon Bay (2011) - single-beam Southwest Florida Rivers (2015) - interferometric swath

Florida↗

USGS2019

Carbon dioxide mineralization feasibility in the United States

Geologic carbon dioxide (CO 2 ) storage is one of many methods for stabilizing the increasing concentration of CO 2 in the Earth’s atmosphere. The injection of CO 2 in deep subsurface sedimentary reservoirs is the most commonly discussed method; however, the potential for CO 2 leakage can create long-term stability concerns. This report discusses the feasibility of an alternative form of geologic CO 2 storage: CO 2 mineralization. In this method, CO 2 reacts with rocks and minerals to form solid and stable carbonate rocks. New pilot projects and laboratory-based kinetics experiments have revealed that this method, both in situ and ex situ, may be a viable option for storage. In situ storage targets in-place rocks at the surface or subsurface. Ex situ storage targets industrial byproducts at the surface like mine tailings. Environmental risks include induced seismicity for in situ methods if pressure is not managed properly, as well as potential water and land use effects. However, there are fewer long-term CO 2 -leakage concerns for mineralization methods compared to saline storage methods and therefore potentially lower long-term monitoring costs. The costs and benefits of CO 2 mineralization are compared to those of CO 2 storage in saline reservoirs using estimates of pressure-limited dynamic storage capacity. This report highlights the regional potential of areas in the United States for in situ and ex situ storage, as well as their proximity to potential sources of CO 2 . Especially suitable targets include asbestos or other ultramafic mine tailings, in situ ultramafic rocks on the East and West Coasts, the Columbia River basalts in the Pacific Northwest, the Midcontinent Rift basalts in the midcontinent, and the basaltic Hawaiian Islands.

Scientific Investigations Report↗

USGS1972

Hawaiian-emperor chain and its relation to cenozoic circumpacific tectonics

The Hawaiian Ridge and Emperor Seamounts appear to form a single chain of tholeiitic shield volcanoes that erupted sequentially on the sea floor of the central Pacific Ocean during Tertiary and Quaternary time. The chain cuts obliquely across the older Cretaceous structural patterns of that sea floor. While the pattern of the chain as a whole is linear, the individual volcanoes lie on short, sigmoidal, en echelon loci that are subparallel with respect to each other and that may represent extensional features in the crust and upper mantle. In general, the order of eurption progressed from northwest to southeaśt along the chain, but the rate of progression of volcanism along individual loci is nonlinear where best studied in the southeastern part of the chain. Furthermore, simultaneous eruptions appear to have occurred within a distance along the chain of about 200 to 400 km. The available data are consistent with a genesis related to the motion of the Pacific crust over a melting spot in the mantle. This melting spot, which may be due to either excess heat or pressure release, appears to have a diameter of about 300 km and is presently centered slightly north of the island of Hawaii. We concur with the idea that the bend in the Hawaiian-Emperor chain probably reflects a significant change in the motion of the Pacific plate. Our best estimate of the age of the Hawaiian-Emperor bend, based on the existing radiometric data, is 24.6 ± 2.5 m.y., which correlates with a time of increased tectonic activity in the western Pacific island arcs and along the northern and eastern boundaries of the Pacific plate. The vector change in the motion of the Pacific plate (with respect to the melting spot) that is required to produce the bend is about 12 cm/yr in a west-southwest-ward direction. © 1972, The Geological Society of America, Inc.

Hawaii↗

USGS1999

Hydrogeology of the upper Floridan Aquifer in the vicinity of the Marine Corps Logistics Base near Albany, Georgia

In 1995, the U.S. Navy requested that the U.S. Geological Survey conduct an investigation to describe the hydrogeology of the Upper Floridan aquifer in the vicinity of the Marine Corps Logistics Base, southeast and adjacent to Albany, Georgia. The study area encompasses about 90 square miles in the Dougherty Plain District of the Coastal Plain physiographic province, in Dougherty and Worth Counties-the Marine Corps Logistics Base encompasses about 3,600 acres in the central part of the study area. The Upper Floridan aquifer is the shallowest, most widely used source of drinking water for domestic use in the Albany area. The hydrogeologic framework of this aquifer was delineated by description of the geologic and hydrogeologic units that compose the aquifer; evaluation of the lithologic and hydrologic heterogeneity of the aquifer; comparison of the geologic and hydrogeologic setting beneath the base with those of the surrounding area; and determination of ground-water-flow directions, and vertical hydraulic conductivities and gradients in the aquifer. The Upper Floridan aquifer is composed of the Suwannee Limestone and Ocala Limestone and is divided into an upper and lower water-bearing zone. The aquifer is confined below by the Lisbon Formation and is semi-confined above by a low-permeability clay layer in the undifferentiated overburden. The thickness of the aquifer ranges from about 165 feet in the northeastern part of the study area, to about 325 feet in the southeastern part of the study area. Based on slug tests conducted by a U.S. Navy contractor, the upper water-bearing zone has low horizontal hydraulic conductivity (0.0224 to 2.07 feet per day) and a low vertical hydraulic conductivity (0.0000227 to 0.510 feet per day); the lower water-bearing zone has a horizontal hydraulic conductivity that ranges from 0.0134 to 2.95 feet per day. Water-level hydrographs of continuously monitored wells on the Marine Corps Logistics Base show excellent correlation between ground-water level and stage of the Flint River. Ground-water-flow direction in the southwestern part of the base generally is southeast to northwest; whereas, in the northeastern part of the base, flow directions generally are east to west, as well as from west to east, thus creating a ground-water low. Ground-water flow in the larger study area generally is east to west towards the Flint River, with a major ground-water-flow path existing from the Pelham Escarpment to the Flint River and a seasonal cone of depression the size of which is dependent upon the magnitude of irrigation pumping during the summer months. Calculated vertical hydraulic gradients (based upon data from 11 well-cluster sites on the Marine Corps Logistics Base) range from 0.0016 to 0.1770 foot per foot, and generally are highest in the central and eastern parts of the base. The vertical gradient is downward at all well-cluster sites.

Georgia↗