Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Natural Hazards and Earth Systems Sciences (NHESS)”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,668 records · Page 81Linked to original sources
USGS2000

Stormflow chemistry in the Santa Ana River below Prado Dam and at the diversion downstream from Imperial Highway, southern California, 1995-98

The Santa Ana River drains about 2,670 square miles of the densely populated coastal area of southern California, near Los Angeles. Almost all the flow in the river, more than 200,000 acre-feet annually, is diverted into ponds where it infiltrates and recharges underlying aquifers. About 2 million people are dependent on these aquifers for water supply. Stormflow in the Santa Ana River is considered a source of "high-quality" water suitable for use as a source of ground-water recharge. To test this assumption, stormflow samples were collected at two locations--below Prado Dam and at the diversion point downstream from Imperial Highway--for 12 winter storms between 1995 and 1998. Nitrate concentrations decreased during stormflow from a median concentration of 7.8 milligrams per liter in base flow to concentrations less than 1 milligram per liter in some large storms. Concentrations of chemically reduced forms of nitrogen (nitrite, ammonia, and organic nitrogen) increased during stormflow and are the predominant forms of nitrogen in large stormflows. Dissolved organic carbon (DOC) concentrations increased from a median concentration of 4.6 milligrams per liter in base flow to more than 20 milligrams per liter in some stormflows. Concentrations of DOC were especially high during the first storm of the rainy season, and large increases in DOC concentrations were measured even as a result of small early season storms that did not cause large increases in streamflow. DOC present during early season stormflow had less ultraviolet absorbance at 254 nanometers (UV 254 ) per unit of carbon than did DOC from late season stormflows. DOC in water held in storage behind Prado Dam had the highest UV 254 absorbance per unit of carbon. Maximum pesticide concentrations in stormflow did not exceed U.S. Environmental Protection Agency Maximum Contaminant Levels. Most pesticide concentrations were less than 1 microgram per liter and less than the detection limits obtained using standard drinking water analyses. Increases in concentrations of pesticides such as diazinon, malathion, and chlorpyrifos in stormflow result from runoff from urban areas downstream from Prado Dam. In general, large late season stormflows have the most pesticide detections of all stormflows sampled. Concentrations of methyl tert-butyl ether (MTBE), a gasoline additive, during base flow were as high as 0.9 microgram per liter and concentrations decreased during stormflow. Like pesticides, the concentrations did not exceed the U.S. Environmental Protection Agency Maximum Contaminant Levels for MTBE.

California↗
USGS2024

From exploration to production: Understanding the development dynamics of lithium mining projects

Recently, there has been considerable recent controversy whether current and new lithium mines will be able to supply the rapidly growing needs of the electromobility transition. Mineral exploration projects are typically active for many years, and only some become operational mines. From exploration to production, the projects go through several stages of characterisation and evaluation. At each stage, decisions are made by companies and stakeholders to advance, continue or stop the project. This is a complex process, and even projects with very similar geological and technical characteristics may take very different trajectories, depending on external factors such as global market conditions and local regulatory environments. The present study investigates the dynamics of this process for lithium exploration projects. A global database of 397 lithium projects was compiled, covering their progression through major development stages between 2004 and 2022. Ordinal logistic regression was used for the statistical analysis of this data. Different explanatory variables were tested, including economic, geological, technical, and geographic factors, to identify the best predictors for project progress at each development stage. The results suggest an essential role for lithium carbonate prices, and a variable role for other factors at each stage. Critically, the already elapsed lead time and project economics, which are traditionally considered important for the prediction of the start-up of individual mines, do not appear to be relevant in all cases. The results provide important insights into the dynamics of lithium supply and may eventually allow more realistic forecasts to be made for future lithium market dynamics.

Resources Policy↗
USGS2026

Treatability study to evaluate bioremediation of trichloroethene at Site K, former Twin Cities Army Ammunition Plant, Arden Hills, Minnesota, 2020–22

Executive Summary Chlorinated solvents, including trichloroethene (TCE) and other chlorinated volatile organic compounds (cVOCs), are widespread contaminants that can be treated by bioremediation approaches that enhance anaerobic reductive dechlorination. Reductive dechlorination can be enhanced either through the addition of an electron donor (biostimulation) or the addition of a known dechlorinating culture (bioaugmentation) along with an electron donor. Although bioremediation has been applied at many TCE-contaminated groundwater sites, application in source zones at sites where residual dense nonaqueous phase liquid (DNAPL) is present is more limited. In this study, laboratory and field treatability tests were completed to evaluate the potential application of anaerobic bioremediation for a shallow groundwater plume containing TCE in a perched alluvial aquifer at Site K, former Twin Cities Army Ammunition Plant, Arden Hills, Minnesota, which was on the National Priorities List as the New Brighton/Arden Hills Superfund site until 2019. In addition to the presence of residual DNAPL at the site, temporal variability in groundwater flow directions and input of oxygenated recharge were possible complicating factors for the application of enhanced anaerobic biodegradation in the shallow plume. The Site K plume extends beneath the footprint of Building 103, which was demolished in 2006, and soil excavations to a maximum depth of 6 feet (ft) below ground surface in 2014 were known to leave some deeper contaminated soil in place in the TCE source area. Groundwater treatment at the site, formalized as part of the 1997 Record of Decision, has been in operation since 1986 and consists of an extraction trench at the downgradient edge of the plume to collect groundwater, which is then pumped to an on-site air stripper. Groundwater concentrations in the plume have been relatively stable since treatment began, indicating a continued source of TCE in the aquifer. The desire for a destructive remedy that would enhance the removal of cVOCs in the aquifer at Site K and shorten the remediation timeframe led the U.S. Army to request that the U.S. Geological Survey conduct a groundwater treatability study to assess bioremediation. This report describes the U.S. Geological Survey bioremediation treatability study conducted during 2020–22, including pre-design site characterization to assist in formulating the bioremediation approach, laboratory experiments to support the design of the field pilot test, and implementation and 1-year performance monitoring results for the pilot test. Pre-design site characterization included the collection of soil cores for cVOC analysis and lithologic descriptions and the re-installment of three wells to obtain hydrologic measurements and initial groundwater chemistry. Relatively flat head gradients were measured at the site, and substantial decreases in water-level elevations occurred from spring to summer (May–July 2021). Continuous water-level monitoring indicated a rapid response to precipitation. Groundwater flow velocities were consistently less than 0.5 foot per day, and the pilot bioremediation test was therefore designed with short lateral distances (about 5 ft) between injection and individual monitoring points. Soil analyses confirmed that high volatile organic compound contamination was left in place in the source area. The highest concentrations were near or in clay at the base of the perched aquifer. Concentrations of cVOCs measured in the replaced wells were consistent with historical data and had a maximum TCE concentration of 57,700 micrograms per liter (μg/L), indicative of nearby residual DNAPL based on the general rule of observed concentrations exceeding 1 percent of solubility. The primary TCE daughter product detected was 1,2-cis-dichloroethene (cisDCE), which indicated limited reductive dechlorination in the plume. Groundwater in both the source and downgradient areas was relatively reducing during the pre-design characterization, particularly in the source area where methane concentrations greater than 400 μg/L were measured. Initial laboratory tests conducted using native aquifer microorganisms from the three replacement wells showed that anaerobic TCE biodegradation rates were low when biostimulated with the addition of sodium lactate as an electron donor, also known as a carbon donor, and resulted in the production of only cisDCE. Addition of a known dechlorinating culture, WBC-2, however, resulted in rapid biodegradation and production of ethene, verifying complete reductive dechlorination of TCE. Microcosms constructed with aquifer soil collected from the site were used to evaluate other electron donors besides lactate to support reductive dechlorination by WBC-2, including corn syrup as an alternative fast-release compound and whey, soy-based vegetable oil, and 3-D Microemulsion (Regenesis, San Clemente, California) as slow-release compounds. First-order rate constants for total organic chlorine removal in these WBC-2 amended microcosms were greatest with either lactate or vegetable oil as the donor, ranging between 0.061 and 0.047 per day or corresponding half-lives of 11–15 days. Testing of commercial products in other WBC-2-bioaugmented microcosms led to selection for the field pilot test of an emulsified vegetable oil product that also contained some sodium lactate as a fast-release donor. Delaying the addition of WBC-2 relative to the donor in the microcosms resulted in the most rapid overall biodegradation rates. The selected design for the pilot test utilized three separate test plots, each about 30-ft wide and 60-ft long: plots GS1 and GS2 in the source area of the plume and plot GS3 in the downgradient area of the plume near the excavation trench. Each test plot had one injection well, one monitoring well upgradient from the injection point, and 12 surrounding monitoring wells in a grid to capture variable groundwater flow directions. Donor injections, which included a bromide tracer, were completed in October 2021, immediately following baseline sampling, and the WBC-2 culture was injected about 40 days later, between November 30 and December 2, 2021. Performance monitoring conducted until December 2022 included hydrologic measurements and analyses of cVOCs, redox-sensitive constituents, dissolved organic carbon, bromide, volatile fatty acids, compound-specific carbon isotopes, and microbial communities. The biogeochemical data collected during the pilot tests in the three treatment plots showed that enhanced, complete reductive dechlorination of cVOCs in the groundwater was achieved in the GS1 and GS3 plots. In contrast, evidence of distribution of the injected amendments and subsequent biodegradation was limited in GS2, which was in an area of more heterogeneous soil lithology and low water table elevations. The molar composition of volatile organic compounds in the GS1 and GS3 plots was dominated by ethene in wells that were reached by the injected amendments by the end of the monitoring period. In the GS1 and GS3 plots, similar patterns were observed of cVOC concentrations decreasing to near detection levels, or below, at some wells sampled in July and October 2022, whereas ethene became dominant and indicated sustained complete reductive dechlorination. Baseline cVOC concentrations were more than a factor of 10 higher in the groundwater in the GS1 plot than in GS3, but no apparent inhibition of complete dechlorination occurred. As expected from the initial pre-design site data and the laboratory experiments, enhanced dissolution of residual DNAPL coupled to biodegradation was evident in the GS1 plot, where a marked increase in dichloroethene (DCE) above the initial baseline and upgradient TCE and DCE concentrations occurred. DCE concentrations subsequently declined where DNAPL dissolution was evident, concurrent with production of vinyl chloride and then predominantly ethene. Thus, overall biodegradation rates outpaced the DNAPL dissolution and desorption and DCE production in the source area. This success in complete degradation to predominantly ethene was achieved even in areas where the DCE concentrations reached a maximum of about 30,000 μg/L. Compound specific isotope analysis of carbon in TCE, cisDCE, trans-1,2-dichloroethene, and vinyl chloride was conducted to provide another line of evidence of the occurrence and extent of anaerobic biodegradation. Along a flow path in each plot that was affected by the injected amendments, carbon isotopes in the TCE and daughter cVOCs in the groundwater became isotopically heavier, indicating biodegradation. Enhanced biodegradation rates calculated from the field tests in GS1 and GS3 showed half-lives of 36.9–75.3 days for DCE degradation and 9.48–38.5 days for ethene production. Notably, these ethene production rates calculated from the field tests are consistent with the results of WBC-2-bioaugmented microcosms amended with either lactate or vegetable oil, which had half-lives for total organic chlorine removal that ranged from 11 to 15 days. These rates indicated rapid enhanced biodegradation, which is promising for application of a full-scale bioremediation remedy. Ultimately, however, the mass of residual or sorbed TCE in the aquifer that remains accessible for dissolution and biodegradation would likely control the time required for a full-scale bioremediation effort to achieve performance goals for TCE and cisDCE specified in the Record of Decision for Site K. The field pilot tests showed that the relatively low hydraulic head gradients and temporal changes in groundwater flow directions in the shallow aquifer would add complexity to a full-scale bioremediation effort. The radius of influence (ROI) at GS1 and GS3 (16.3 ft and 12.7 ft, respectively) were close to the design ROI of 15 ft. The estimated ROI at GS2 was about four times the design ROI, but may be less reliable at this location owing to groundwater flow direction. In addition, the low temperatures following WBC-2 injection in late November to early December 2021, in combination with the low hydraulic head gradients, were probably major factors in the delay observed before the onset of enhanced biodegradation following injection of the culture. Additional test injections could be beneficial to optimize the timing of donor and culture injections with the variable temperatures and hydraulic head in the shallow aquifer.

Minnesota↗
USGS2025

Data gap analysis for estimation of agricultural return flows in the Upper Gunnison River Basin, Colorado

The Gunnison River and many tributaries in the Upper Gunnison River Basin provide water to irrigate agricultural crops. The application of irrigation water can recharge some aquifers locally by water percolating below the root zone and eventually flowing back to the stream or river through the subsurface. Diverting surface water for irrigation reduces streamflow during the irrigation season but can provide temporary storage of water and supplement streamflow after the snowmelt runoff season. Understanding the timing and quantity of agricultural return flows could help resource managers make informed decisions and adapt to potential changes in water management and availability that could affect irrigation practices. In 2024, the U.S. Geological Survey, in cooperation with the Upper Gunnison River Water Conservancy District, began a study to characterize agricultural return flows in the Upper Gunnison River Basin by using endmember mixing analysis and developing a groundwater model. Both approaches require data from multiple sources, but data gaps exist in the East River study reach and other reaches of interest (Ohio Creek, Tomichi Creek, and Cochetopa Creek). The East River Basin, which is the initial focus of the study, has fewer data gaps than the other basins. Data gaps could be addressed by installing additional surface water and groundwater monitoring sites, making regular streamflow measurements on tributaries, and completing tests to characterize local aquifer properties.

Colorado↗
USGS2025

Water use across the conterminous United States, water years 2010–20

Withdrawals of water for human use are fundamental to the evaluation of the Nation’s water availability. This chapter provides an analysis of public supply, crop irrigation, and thermoelectric power water use for the conterminous United States (CONUS) during water years 2010–20. These three categories account for about 90 percent of water withdrawals in the Nation. The values presented here are based on modeling approaches that estimate water use at temporal (monthly) and spatial scales (12-digit hydrologic unit code—small watersheds sized 50–100 square kilometers) compatible for integration into a broader national assessment of water availability. Models also provide an understanding of factors that influence water use. An estimated 244,817 million gallons per day (Mgal/d; 28,677 million cubic meters per month [Mm 3 /mo]) were withdrawn on average within the CONUS during water years 2010–20 from fresh water and saline water for crop irrigation, public supply, and thermoelectric power, with shares of 43, 14.5, and 42.5 percent for each of these categories, respectively. In the same period, estimated withdrawals and consumptive use (1) for public supply were 35,400 and 4,219 Mgal/d (4,081 and 486 Mm 3 /mo), respectively; (2) for crop irrigation were 105,497 and 75,698 Mgal/d (12,147 and 8,716 Mm 3 /mo), respectively; and (3) for thermoelectric power from fresh water were 82,656 and 2,904 Mgal/d (9,952 and 345 Mm 3 /mo), respectively. Withdrawals for these categories of water use are highly spatially variable, with western States dominated by crop irrigation and eastern States dominated by thermoelectric-power water use. Public supply accounts for the largest percentage of water use in several heavily populated northeastern States. Reliance on groundwater compared to surface water depends on the availability of water sources and the type of water use. For public supply, withdrawals from groundwater are greater than withdrawals from surface water in the Western aggregated hydrologic regions, whereas the balance shifts to more surface water for the rest of the CONUS. In all aggregated hydrologic regions, the predominant source of water for crop irrigation is groundwater. Most thermoelectric power facilities in the eastern half of the CONUS use surface water from freshwater and saline sources; most thermoelectric power facilities in the western half of the CONUS use groundwater.

conterminous United States↗
USGS2024

Geologic map of the southern Stillwater Range, Nevada

The southern Stillwater Range in west-central Nevada contains the western part of the Oligocene Stillwater-Clan Alpine caldera complex, which extends about 55 kilometers (km) east from the west side of the Stillwater Range to the northwestern Desatoya Mountains. The complex consists of at least seven nested ignimbrite calderas and subjacent plutonic rocks emplaced into a complex basement composed of Mesozoic metasedimentary and metavolcanic rocks and Cretaceous granitic plutons. The calderas formed during large-volume (100s to greater than (>) 2,500 cubic kilometers [km 3 ]) eruptions of silicic ignimbrites between about 30.4 and 25.1 million years before present (Ma). The Job Canyon and Poco Canyon calderas and the western part of the much larger Elevenmile Canyon caldera, and their plutonic roots, are exposed in the southern Stillwater Range. There, the caldera complex was steeply tilted during large-magnitude crustal extension in the middle Miocene, and further exhumed during the late Miocene to Holocene Basin and Range extension that formed the modern Stillwater Range. This tilted crustal section affords an exceptional opportunity to view structural cross sections of ignimbrite calderas and their plutonic roots to paleodepths as much as 9–10 km.

Nevada↗
USGS2025

Toward a new framework to evaluate process-based model configurations and quantify data worth prior to calibration

Model criticism, discrimination, and selection methods often rely on calibrated model outputs. Because calibration can be computationally expensive, model criticism can first be undertaken by assessing model outputs obtained from limited prior parameter ensembles. However, such prior-based methods are often heuristic and do not formalize the notion of balancing model consistency with data and model complexity (i.e., model adequacy). We present a new framework to discriminate among candidate models prior to calibration that formalizes prior-to-calibration model adequacy into a metric to implicitly balance prior model output data coverage with model complexity represented by prior output (co)variance. The prior model adequacy metric “Mahalanobis distance deviation” quantifies the deviation of (a) the set of squared Mahalanobis distances of data from a prior model output distribution from (b) the set of squared Mahalanobis distances of data from their own distribution. A new data worth metric “discernment value” is also presented which quantifies the value of data for screening less-adequate models prior to calibration. Discernment value is calculated from the change in variance of a weighted average of prior model outputs from all candidate models due to less-adequate model outputs receiving lower weight. The framework is demonstrated using a one-dimensional groundwater flow model with eight possible configurations. A synthetic data network is used to test the framework. Results show the framework identifies the candidate models most similar to the true model used to create the synthetic data. Discernment values show variation in the value of different data types and locations for screening less-adequate models.

Water Resources Research↗
USGS2025

Paleoproterozoic vein graphite mineralization caused by decarbonation in the Ruby Range, Montana, USA

Hydrothermal graphite veins are a possible source for modern battery materials and require better understanding of their carbon source(s) and absolute timing to develop mapable criteria for exploration models. We present new observations of graphite vein and alteration paragenesis and U-Pb LA-ICP-MS titanite age data from the Ruby prospect, Montana, USA, that constrain mineralization timing and source. The graphite veins cut high-temperature metamorphic rocks of the lower Christensen Range suite and are associated with intense diopside (Di0.69Hd0.27Jo0.04) alteration of marble. The oldest titanite ages in fresh marble and partially altered calc-silicate gneiss are ca. 2,500 – 2,450 Ma, show elevated REE values, and Eu/Eu* <1.5, consistent with growth during early regional metamorphism. Titanite in diopside-graphite alteration, interpreted as part of the hydrothermal vein-forming episode, cluster around 1,750 Ma, are characterized by lower REE values, and show Eu/Eu* >2; suggesting a low fO 2 fluid generated from metamorphism during the Big Sky orogeny. Our paragenetic observations and titanite ages indicate graphite vein formation via skarnoid decarbonation reactions in marble late in regional orogenesis. Granulite-facies, carbonate-bearing, supracrustal rock terranes are thus favorable for hydrothermal graphite vein deposits.

Montana↗
USGS2026

Increasing artificial light at night enhances salmonid predator foraging efficiency in an urbanized lake

Artificial light at night (ALAN) poses a threat to ecosystems globally. It includes both direct and indirect light, or skyglow, which occurs when ALAN scatters in the atmosphere, extending beyond its original source. We analyzed ALAN trends in Lake Washington, WA, from 2014 to 2023 using Visible Infrared Imaging Radiometer Suite (VIIRS) nighttime light measurements, evaluated the relationship between in situ and satellite measurements, and modeled predator search volumes for a juvenile salmon predator, cutthroat trout ( Oncorhynchus clarki ), as a function of ambient light and turbidity conditions. Open water regions experienced significant increases in ALAN, while nearshore areas primarily showed no or negative trends, revealing the role of skyglow in shaping open water light environments. Using a visual foraging model for cutthroat trout, we found that juvenile salmon at the shallow southern pelagic site experienced light 28 times brighter, resulting in a 168% greater predation vulnerability than those at the northern site. In the Ship Canal, a narrow corridor for outmigrating salmon, predator search volumes were 249% higher than at the southern site. These contrasts in predation vulnerability demonstrate how local conditions influence predator–prey dynamics and provide critical insight for targeting mitigation of both nearshore and distant light sources.

Washington↗
USGS2025

Mineralization processes at Escanaba Trough

Escanaba Trough off northern California is the southernmost and only sediment covered segment of the Gorda Ridge. Hydrothermal mineralization was first discovered in Escanaba Trough in 1985, and subsequent investigations included the delineation of the NESCA (northern Escanaba) and SESCA (southern Escanaba) sections of Escanaba Trough, as well as drilling by Ocean Drilling Program (ODP) Leg 169 in 1996. Preliminary research conducted in the 1980s distinguished two classes of sulfide mineral assemblages within the Escanaba Trough: one dominated by pyrrhotite (Fe 1-x S) and one containing ‘mixed sulfides’ including chalcopyrite (CuFeS 2 ) and sphalerite (ZnS). In 2022, we conducted a research expedition to the Escanaba Trough to more thoroughly characterize mineralization processes and consider preservation of precipitated minerals throughout hydrothermally active and inactive sections of Escanaba Trough, with the specific objective of characterizing the host minerals, and processes of enrichment for specific elements which are currently listed as critical elements and can also be toxic under certain conditions (Sb, As, Ba, Co, Ga, Ge, Te). The following will include initial results from that work.

California↗
USGS2026

Transit time modeling framework for predicting freshwater salinization in urban catchments

The salinity of inland freshwaters is rising globally, particularly in urban watersheds where winter road deicers are widely applied. Attributing stream salinity dynamics to specific sources and transport pathways remains challenging due to episodic salt inputs, engineered drainage, and strong coupling between hydrology and subsurface storage. We present a modeling framework that couples climate-driven deicer build-up and wash-off with transient transit time distribution theory to simulate salt transport through drainage, interflow, and groundwater pathways. Applied to an urban watershed in Northern Virginia (USA), the model reproduces ten years of high-frequency stream salinity measurements across daily-to-decadal timescales. The calibrated model implies an average deicer application of 206 tonnes Cl −1 yr −1 , or roughly one 20 kg bag of rock salt person −1 yr −1 when normalized by the 20,000 people living in the watershed. In winter months, higher infiltration routes a large fraction of snowmelt and deicers into shallow subsurface pathways, enhancing vadose-zone and interflow contributions to stream salinity. Limited subsurface storage capacity and seasonal hydrologic turnover flush excess chloride from the vadose zone and groundwater during subsequent summer storms. By linking climate-driven deicer inputs, hydrologic connectivity, and stream water age, the framework provides a transferable basis for diagnosing and managing freshwater salinization in urban watersheds.

Virginia↗
USGS2025

Revisiting an enigma on California's north coast: The Mw6.5 Fickle Hill earthquake of 21 December 1954

Many earthquakes occur along the North Coast of California in the vicinity of the Mendocino Triple Junction (MTJ), where the Pacific, Gorda, and North American (NA) plates meet, and on the adjacent plate boundaries. The MTJ marks the nexus of the Mendocino and San Andreas faults with the Cascadia subduction zone (CSZ). Historically, most large earthquakes around the MTJ have been within the offshore Gorda plate and its subducted portion beneath the NA plate. North of the MTJ, active faults mapped in the NA plate are part of the CSZ fold‐and‐thrust belt. Although some events have been detected in the NA plate, no large historic events have been associated with mapped surface faults. The 21 December 1954 M w 6.5 earthquake in Humboldt County is one possible exception. Using published data from catalogs and articles, unpublished data from Berkeley’s archives, and S ‐ P times interpreted from two U.S. Coast and Geodetic Survey (USCGS) accelerometers, we determine a probability cloud for the earthquake’s hypocenter using NonLinLoc. The highest probability location lies beneath Fickle Hill just east of the city of Arcata, California, at 40.87° N, 124.03° W, and ∼11 km depth. Using P ‐wave polarities from Berkeley stations and the digitized waveforms from the accelerometers, we find that the focal mechanism most consistent with the data indicates thrust movement with strike, dip, and rake of 350°, 10°, and 90°, respectively, at a depth of 14 km. Given the depth uncertainties of both this event and the megathrust, this implies that the earthquake most likely took place on the subduction interface rather than on the mapped faults in the Mad River fault zone that trend 322° and dip to the northeast. The revisited intensity in the epicentral region also supports a location beneath Fickle Hill to the east of the city of Arcata, California.

California, Idaho, Nevada, Oregon, Washington↗
USGS2026

Surface variable‐based machine learning for scalable arsenic prediction in undersampled areas

In the United States, private wells are not federally regulated, and many households do not test for Arsenic (As). Chronic exposure is linked with multiple health outcomes, and risk can change sharply over short distances and with well depth. Coarse maps or sparse sampling often miss exceedances. Most existing models operate at ∼1 km resolution and use groundwater chemistry or detailed geologic logs, which limits their use in undersampled areas where improved guidance is most needed. We overcome these limitations by developing a machine learning model for Minnesota, USA, that predicts As exposure risk using only surficial variables from remote sensing and global data sets. Variables related to surface water hydrology and geomorphology are selected based on mechanistic links that control redox conditions and As mobilization. Local training was essential, and surficial geology variables that are more sensitive to local conditions were needed to maximize model accuracy. The resulting complete model was sufficiently sensitive to generate accurate and detailed risk maps and depth profiles of As concentrations above the 10 μg/L maximum contaminant level. Accuracy depended on local training data density. We identified a training data density of 0.07 wells/km 2 as a practical target for stable county-level performance. Maps of exceedance probabilities highlight priority areas for testing that are particularly important in rural communities that have received less sampling. These results support public health action by guiding where to install wells and where to test them, how much new sampling is needed, and where treatment outreach is most urgent.

Minnesota↗
USGS2024

Geomorphic map of the Umatilla River corridor, Oregon

This map portrays the distribution of landforms along the Umatilla River in northeastern Oregon and covers a corridor 127 kilometers long from the confluence of the Umatilla River with the Columbia River upstream to Meacham Creek. The map encompasses the valley bottom and extends about 1 kilometer up the adjoining hillslopes. Map data are intended to support water quality and fisheries enhancement efforts pursuant to the First Foods, a resource-management approach that focuses on traditionally gathered foods including water, fish, big game, roots, and berries and calls attention to the reciprocity between people and the foods upon which humans depend. The Umatilla River drains about 6,300 square kilometers on the northwest slope of the Blue Mountains in northeast Oregon. Most of the drainage basin is underlain by Miocene basalt flows of the Columbia River Basalt Group. Younger, weakly lithified, late Miocene and early Pliocene gravel deposits of local origin (for example, McKay Formation) are mapped in a few places. Upland surfaces are mantled with windborne silt (loess) correlative with deposits elsewhere known as the Palouse Formation. Surfaces below an elevation of about 340 meters were inundated repeatedly by large Pleistocene glacial outburst floods, most emanating from glacial Lake Missoula in western Montana. In backflooded areas such as the lower Umatilla River valley, Missoula floods deposited extensive slack-water silt. Areas mapped as open water, active channel and tie channel, flood basin, valley bottom, and modified land constitute the geomorphic floodplain: the area subject to occasional inundation by the Umatilla River. Deposits and landforms within the floodplain are inset into Missoula flood deposits and hence postdate the 20–15-kilo-annum Missoula floods. Some floodplain deposits are no more than a few centuries old, as indicated by substantial erosion and deposition during the Umatilla River flood of February 2020, the largest since systematic measurements began in October 1903. Deposits and landforms of the floodplain are transient features within the longer-term incision of the Umatilla River into mid-Miocene flood basalts and younger gravel of the McKay Formation.

Oregon↗
USGS2025

Risk implications of Poisson assumptions and declustering inferred from a fully time-dependent earthquake forecast

We use the Third Uniform California Earthquake Rupture Forecast Epidemic Type Aftershock Sequence model, which is fully time-dependent in terms of including spatiotemporal clustering, to evaluate the effects of the Poisson assumption and declustering algorithms on statewide loss exceedance curves. The model is simulation based, meaning it produces synthetic catalogs that exhibit realistic behavior with respect to aftershocks and multi-fault earthquakes. A Poisson version of the model was constructed by randomizing event times, and the influence of two declustering algorithms was examined as well. We demonstrate that the probability of one-or-more loss exceedances (occurrence exceedance probability) is greater for the Poisson model because it has fewer seismically quiet time windows. The discrepancy between dollar loss estimates with a given exceedance probability is up to a factor of 32% but varies depending on the loss threshold (the x-axis value) and the forecast duration (we examined a range between 24 h and 50 years, with the discrepancy for the latter being negligible). We discuss how the one-or-more loss exceedance metric is questionable because it ignores all but the maximum loss experienced in each timeframe. An alternative metric based on total aggregate loss in each time window (aggregate exceedance probability) was therefore also examined, for which the Poisson model again implies higher risk at intermediate losses but lower risk at higher losses (because large, triggered events now contribute to total aggregate losses for the fully time-dependent model). We also argue that declustering is not a scientifically justifiable way to deal with full time dependence, in agreement with a chorus from other recent studies. It is difficult to draw generally applicable conclusions from our study, in part because application specific details will likely be important, but our results highlight how full time dependence can be reckoned with once authoritative forecast models are made available.

California↗
USGS2026

Simulation of groundwater flow to evaluate hydrogeologic controls on a PFAS plume, Coakley Landfill Superfund Site, Rockingham County, New Hampshire

Per- and polyfluoroalkyl substances (PFAS), including perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS), have been detected at combined concentrations above 2,000 nanograms per liter (ng/L) at groundwater seep locations near the Coakley Landfill Superfund site, in North Hampton, New Hampshire. The landfill was active from 1972 to 1985. An impermeable cap was placed on the landfill in 1998. The adjacent area to the Coakley Landfill has many water supply wells, and transport of PFAS compounds to the wells is a concern. Fracture anisotropy in the underlying bedrock aquifer complicates the understanding of PFAS transport because groundwater preferentially travels along fractures that may not align with the prevailing groundwater flow direction. In 2018, the U.S Environmental Protection Agency and the U.S. Geological Survey began an investigation of the groundwater flow from the Coakley Landfill site. This report describes the modification of a numerical groundwater-flow model for the local area around the Coakley Landfill and summarizes findings of the investigation. In addition, this report includes a brief description of PFOA and PFOS occurrence, a discussion of model construction, evaluation of model performance through calibration, and discussion of simulation results for two periods (before and after capping). Limitations are also discussed. Results show that simulated groundwater flow moves from the Coakley Landfill to the west and north. Advective transport modeling using particle tracking shows that groundwater from the landfill discharges primarily to streams to the west and north, and a small amount is transported to distal wells. Dilution of contaminants through advection and dispersion likely plays a role in whether PFAS compounds from the landfill will be detected above laboratory reporting levels at distal wells.

EarthArXiv↗
USGS2024

Joint pilot fish habitat framework

This story map will take you through the process of exploring and testing methods necessary for a higher resolution, seamless fish habitat assessment across both inland and estuarine waters through the lens of our joint pilot assessment Fish habitat assessments attempt to relate past, current, or future landscape conditions to the state of fish species occurrence, distribution, abundance, or community and habitat condition in streams, rivers, or estuaries. Previous fish habitat assessments, such as the National Fish Habitat Assessment, conducted separate and disconnected assessments for inland waters and estuaries. In this project, National Oceanic and Atmospheric Administration ( NOAA ) and U.S. Geological Survey ( USGS ) researchers created a seamless spatial framework to allow assessments that integrate influences on fish habitat from headwaters to the estuary. This effort began when the Chesapeake Bay Program Fish Habitat Action Team expressed interest in a Baywide fish habitat assessment spanning tidal salt, tidal fresh, warm non-tidal, and cold non-tidal waters. However, the complexity of the myriad of implementation details to consider when developing such an assessment necessitated the need for a tributary-specific pilot assessment. To conduct this pilot assessment, a NOAA/USGS joint partnership was formed with cooperation and support from the Chesapeake Bay Agreement and Chesapeake Bay Fish Habitat Action Team (FHAT).

Maryland↗
USGS2025

Assessment of density pattern retention of generalized data for 1:100,000-scale United States topographic maps

Cartographic generalization reduces the complexity of geographic data to produce legible, smaller-scale displays that retain essential information and logical geographic patterns. Generalization is a vital process in topographic map production. An important challenge in this process is managing and evaluating consistency across scale in the density and spatial distribution of map features such as buildings, roads, streams, water bodies, and elevation contours. Density patterns in these features reflect underlying physiographic conditions, which include factors such as bedrock geology, tectonics, climate, and landforms. Assessments of an acceptable level of change in feature density patterns are critical to ensuring the readability, usability, and accuracy of generalized maps and data. Preserving realistic density patterns across mapping scales also supports sustainable development goals in cartography, by helping to prioritize and communicate the relative reliability of geospatial data at specific scales.

Conference Paper↗