SEARCH · Geology Reports

Results for “Internal Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81Linked to original sources

USGS2018

Simulation of hydrodynamics, water quality, and lake sturgeon habitat volumes in Lake St. Croix, Wisconsin and Minnesota, 2013

Lake St. Croix is a naturally impounded, riverine lake that makes up the last 40 kilometers of the St. Croix River. Substantial land-use changes during the past 150 years, including increased agriculture and urban development, have reduced Lake St. Croix water-quality and increased nutrient loads delivered to Lake St. Croix. A recent (2012–13) total maximum daily load phosphorus-reduction plan set the goal to reduce total phosphorus loads to Lake St. Croix by 20 percent by 2020 and reduce Lake St. Croix algal bloom frequencies. The U.S. Geological Survey, in cooperation with the National Park Service, developed a two-dimensional, carbon-based, laterally averaged, hydrodynamic and water-quality model, CE–QUAL–W2, that addresses the interaction between nutrient cycling, primary production, and trophic dynamics to predict responses in the distribution of water temperature, oxygen, and chlorophyll a. Distribution is evaluated in the context of habitat for lake sturgeon, including a combination of temperature and dissolved oxygen conditions termed oxy-thermal habitat. The Lake St. Croix CE–QUAL–W2 model successfully reproduced temperature and dissolved oxygen in the lake longitudinally (from upstream to downstream), vertically, and temporally over the seasons. The simulated water temperature profiles closely matched the measured water temperature profiles throughout the year, including the prediction of thermocline transition depths (often within 1 meter), the absolute temperature of the thermocline transitions (often within 1.0 degree Celsius), and profiles without a strong thermocline transition. Simulated dissolved oxygen profiles matched the trajectories of the measured dissolved oxygen concentrations at multiple depths over time, and the simulated concentrations matched the depth and slope of the measured concentrations. Additionally, trends in the measured water-quality data were captured by the model simulation, gaining some potential insights into the underlying mechanisms of critical Lake St. Croix metabolic processes. The CE–QUAL–W2 model tracked nitrate plus nitrite, total nitrogen, and total phosphorus throughout the year. Inflow nutrient contributions (loads), largely dominated by upstream St. Croix River loads, were the most important controls on Lake St. Croix water quality. Close to 60 percent of total phosphorus to the lake was from phosphorus derived from organic matter, and about 89 percent of phosphorus to Lake St. Croix was delivered by St. Croix River inflows. The Lake St. Croix CE–QUAL–W2 model offered potential mechanisms for the effect of external and internal loadings on the biotic response regarding the modeled algal community types of diatoms, green algae, and blue-green algae. The model also suggested the seasonal dominance of blue-green algae in all four pools of the lake. A sensitivity analysis was completed to test the total maximum daily load phosphorus-reduction scenario responses of total phosphorus and chlorophyll a. The modeling indicates that phosphorus reductions would result in similar Lake St. Croix reduced concentrations, although chlorophyll a concentrations did not decrease in the same proportional amounts as the total phosphorus concentrations had decreased. The smaller than expected reduction in algal growth rates highlighted that although inflow phosphorus loads are important, other constituents also can affect the algal response of the lake, such as changes in light penetration and the breakdown of organic matter releasing nutrients. The available habitat suitable for lake sturgeon was evaluated using the modeling results to determine the total volume of good-growth habitat, optimal growth habitat, and lethal temperature habitat. Overall, with the calibrated model, the fish habitat volume in general contained a large proportion of good-growth habitat and a sustained period of optimal growth habitat in the summer. Only brief periods of lethal oxy-thermal habitat were present in Lake St. Croix during the model simulation.

Minnesota, Wisconsin↗

USGS2002

Strategic vision for the U. S. Geological Survey in the Great Lakes-St. Lawrence Region, 2001-2010

The U.S. Geological Survey's (USGS) strategic vision for the Great Lakes-St. Lawrence Region is that of a healthy ecosystem, whose ecological integrity and economic health are nurtured and sustained through sound resource-management decisions based on reliable, timely, and objective scientific information and data. The USGS is a leader in providing reliable, relevant, timely, and objective scientific data and information at local, statewide, regional, national, and international scales to assist in the management and restoration of the natural resources in the Great Lakes-St. Lawrence Region. The mission of the USGS in the Great Lakes-St. Lawrence Region is to provide natural science information to the broad community of policymakers, resource managers, regulators, scientists, and private citizens who contribute to informed decisions concerning natural-resource management practices and ecosystem quality and integrity. The strategic vision for the USGS in the Great Lakes-St. Lawrence Region is a plan to address complex issues that require integrated natural-science information. The strategic vision describes how the USGS will coordinate existing programs and draw upon the strengths of the entire organization. It provides the framework for long-term coordination and integration of USGS Programs and activities over the next decade (2001-10). The strategic vision describes the role of the USGS in the Great Lakes-St. Lawrence Region, the coordination of activities within and outside the Bureau and Department of Interior, and interactions between the USGS and its cooperators, partners, and stakeholders in the Region.

Great Lakes-St. Lawrence region↗

USGS2021

A geologic field guide to S P Mountain and its lava flow, San Francisco Volcanic Field, Arizona

Introduction We created this guide to introduce the user to the San Francisco Volcanic Field as a terrestrial analog site for planetary volcanic processes. For decades, the San Francisco Volcanic Field has been used to teach scientists to recognize the products of common types of volcanic eruptions and associated volcanic features. The volcanic processes and products observed in this volcanic field are like those observed on lunar and Martian surfaces. As a result, this region has been a favored location for training National Aeronautics and Space Administration astronauts and engineers since the Apollo missions. Though the San Francisco Volcanic Field has more than 600 volcanic vents and flows, this guide will focus on S P Mountain (known locally as S P Crater, located ~30 miles north of Flagstaff, Arizona), one of the best preserved and most accessible of the volcanic cones and lava flows. S P Mountain presents both major types of basaltic eruptions—explosive and effusive—as well as some commonly associated tectonic landforms. We assume that the user has a basic understanding of geologic concepts and terminology. For more specialized terminology, we include tables showing the classification scheme for lava compositions, styles of eruptions, and tephra sizes (tables 1, 2, and 3). If a further introduction or refresher in volcanological terminology is desired, we suggest reviewing such terms on the U.S. Geological Survey Volcano Science Center’s online glossary ( https://volcanoes.usgs.gov/vsc/glossary/ ). One term requires clarification at the start of this guide—the term cinder. The terms cinder and cinder cone are widely used to describe the material and edifice produced by lava fountains. However, the term comes from the mining and construction industries and has no clear or formal definition. The international committees in geology and volcanology have chosen the term tephra to be the general term to describe pyroclasts (material ejected through a volcanic explosion or from a volcanic vent). Therefore, in this guide, we use the term tephra rather than cinder. This guide is outlined as follows: A brief tour of volcanism across the solar system A brief geologic history of the Colorado Plateau and San Francisco Volcanic Field Background on distributed volcanism and S P Mountain Driving directions and field stops Questions for discussion Each field stop includes a brief description, learning goals, tasks, and a summary of key points. At the end of the field guide are discussion points and questions that will ask the user to consider what they have observed and learned and how such knowledge can be used to better our understanding of geologic processes on other planetary bodies. Upon the completion of this field guide, we expect the user to: Have a basic understanding of the volcanic processes relevant to S P Mountain and its lava flow. Be able to identify different volcanic textures that are associated with tephra cones. Be aware of the different observations one can make at different scales (for example, observing lava flow morphology from aerial or satellite imagery versus tephra characteristics in the field).

Arizona↗

USGS2002

Place vs. time and vegetational persistence: A comparison of four tropical mires from the Illinois Basin during the height of the Pennsylvanian Ice Age

Coal balls were collected from four coal beds in the southeastern part of the Illinois Basin. Collections were made from the Springfield, Herrin, and Baker coals in western Kentucky, and from the Danville Coal in southwestern Indiana. These four coal beds are among the principal mineable coals of the Illinois Basin and belong to the Carbondale and Shelburn Formations of late Middle Pennsylvanian age. Vegetational composition was analyzed quantitatively. Coal-ball samples from the Springfield, Herrin, and Baker are dominated by the lycopsid tree Lepidophloios, with lesser numbers of Psaronius tree ferns, medullosan pteridosperms, and the lycopsid trees Synchysidendron and Diaphorodendron. This vegetation is similar to that found in the Springfield and Herrin coals elsewhere in the Illinois Basin, as reported in previous studies. The Danville coal sample, which is considerably smaller than the others, is dominated by Psaronius with the lycopsids Sigillaria and Synchysidendron as subdominants. Coal balls from the Springfield coal were collected in zones directly from the coal bed and their zone-by-zone composition indicates three to four distinct plant assemblages. The other coals were analyzed as whole-seam random samples, averaging the landscape composition of the parent mire environments. This analysis indicates that these coals, separated from each other by marine and terrestrial-clastic deposits, have essentially the same floristic composition and, thus, appear to represent a common species pool that persisted throughout the late Middle Pennsylvanian, despite changes in baselevel and climate attendant the glacial interglacial cyclicity of the Pennsylvanian ice age. Patterns of species abundance and diversity are much the same for the Springfield, Herrin, and Baker, although each coal, both in the local area sampled, and regionally, has its own paleobotanical peculiarities. Despite minor differences, these coals indicate a high degree of recurrence of assemblage and landscape organization. The Danville departs dramatically from the dominance-diversity composition of the older coals, presaging patterns of tree-fern and Sigillaria dominance of Late Pennsylvanian coals of the eastern United States, but, nonetheless, built on a species pool shared with the older coals. ?? 2002 Elsevier Science B.V. All rights reserved.

International Journal of Coal Geology↗

USGS1997

Satellite image maps of Pakistan

Georeferenced Landsat satellite image maps of Pakistan are now being made available for purchase from the U.S. Geological Survey (USGS). The first maps to be released are a series of Multi-Spectral Scanner (MSS) color image maps compiled from Landsat scenes taken before 1979. The Pakistan image maps were originally developed by USGS as an aid for geologic and general terrain mapping in support of the Coal Resource Exploration and Development Program in Pakistan (COALREAP). COALREAP, a cooperative program between the USGS, the United States Agency for International Development, and the Geological Survey of Pakistan, was in effect from 1985 through 1994. The Pakistan MSS image maps (bands 1, 2, and 4) are available as a full-country mosaic of 72 Landsat scenes at a scale of 1:2,000,000, and in 7 regional sheets covering various portions of the entire country at a scale of 1:500,000. The scenes used to compile the maps were selected from imagery available at the Eros Data Center (EDC), Sioux Falls, S. Dak. Where possible, preference was given to cloud-free and snow-free scenes that displayed similar stages of seasonal vegetation development. The data for the MSS scenes were resampled from the original 80-meter resolution to 50-meter picture elements (pixels) and digitally transformed to a geometrically corrected Lambert conformal conic projection. The cubic convolution algorithm was used during rotation and resampling. The 50-meter pixel size allows for such data to be imaged at a scale of 1:250,000 without degradation; for cost and convenience considerations, however, the maps were printed at 1:500,000 scale. The seven regional sheets have been named according to the main province or area covered. The 50-meter data were averaged to 150-meter pixels to generate the country image on a single sheet at 1:2,000,000 scale

Fact Sheet↗

USGS1996

Summary of the Oahu, Hawaii, regional aquifer-system analysis

Oahu, the third largest of the Hawaiian islands, is formed by the eroded remnants of two elongated shield volcanoes with broad, low profiles. Weathering and erosion have modified the original domed surfaces of the volcanoes, leaving a landscape of deep valleys and steep interfluvial ridges in the interior highlands. The Koolau Range in eastern Oahu and the Waianae Range in western Oahu are the eroded remnants of the Koolau and Waianae Volcanoes. The origin, mode of emplacement, texture, and composition of the rocks of Oahu affect their ability to store and transmit water. The volcanic rocks are divided into four groups: (1) lava flows, (2) dikes, (3) pyroclastic deposits, and (4) saprolite and weathered basalt. Stratified sequences of thin-bedded lava flows form the most productive aquifers in Hawaii. Dikes are near-vertical sheets of massive intrusive rock that typically contain only fracture permeability. Pyroclastic deposits include ash, cinder, and spatter; they are essentially granular, with porosity and permeability similar to those of granular sediments. Weathering of basaltic rocks in the humid, subtropical climate of Oahu alters igneous minerals to clays and oxides, reducing the permeability of the parent rock. Saprolite is weathered material that has retained textural features of the parent rock. Estimates of hydraulic conductivity along the plane of dike-free lava flows tend to fall within about one order of magnitude, from about 500 to about 5,000 feet per day. Estimates of specific yield range from about 1 to 20 percent; most of the values lie within a narrow range of about 5 to 10 percent. The occurrence of ground water on Oahu is determined by the type and character of the rocks and by the presence of geohydrologic barriers. The primary modes of freshwater occurrence on Oahu are as a basal lens of fresh ground water floating on saltwater, as dike-impounded ground water, and as perched ground water. Saltwater occurs at depth throughout much of the island. A regional aquifer system composed of the Waianae aquifer in the Waianae Volcanics and the Koolau aquifer in the Koolau Basalt is subdivided into well-defined areas by geohydrologic barriers. The aquifers are separated by the Waianae confining unit formed by weathering along the Waianae-Koolau unconformity. In some coastal areas, a caprock of sedimentary deposits overlies and confines the aquifers. The island of Oahu has been divided into seven major ground-water areas delineated by deep-seated structural geohydrologic barriers; these areas are further subdivided by shallower internal barriers to ground-water flow. The Koolau rift zone along the eastern (windward) side of the island and the Waianae rift zone to the west (Waianae area) constitute two of the major ground-water areas. North-central Oahu is divided into three smaller ground-water areas, Mokuleia, Waialua, and Kawailoa. The Schofield ground-water area encompasses much of the Schofield Plateau of central Oahu. Southern Oahu is divided into six areas, Ewa, Pearl Harbor, Moanalua, Kalihi, Beretania, and Kaimuki. Southeastern Oahu is divided into the Waialae and Wailupe-Hawaii Kai areas. Along the northeast coast of windward Oahu is the Kahuku ground-water area. The aquifers of Oahu contain shallow freshwater and deeper saltwater flow systems. There are five fresh ground-water flow systems: meteoric freshwater flow diverges from ground-water divides that lie somewhere within the Waianae and Koolau rift zones, forming an interior flow system in central Oahu (which is divided into the northern and southern Oahu flow systems) and exterior flow systems in western (Waianae area) Oahu, eastern (windward) Oahu, and southeastern Oahu. Development of the ground-water resources on Oahu began when the first well was drilled near Honouliuli in the summer of 1879. By 1890, 86 wells had been drilled on the island. From about 1891 to about 1910, development increased rapidly with the drilling of a

Hawaii↗

USGS2024

Long-term communication of aftershock forecasts: The Canterbury earthquake sequence in New Zealand

On 14 February 2016, a magnitude (M)5.7 earthquake struck in Christchurch New Zealand (Aotearoa in the Maori language). The shaking caused damage to historic facades, power outages, cliff collapses, rock falls, and liquefaction but no reported injuries or fatalities. This Valentine’s Day earthquake was an aftershock in the Canterbury earthquake sequence (CES), which began on 4 September 2010 with the M7.1 Darfield Earthquake and included the destructive and fatal M6.2 Christchurch aftershock on 22 February 2011. This study, eight months after the Valentine’s Day earthquake and six years after the initiation of the CES, is the first to explore long-term aftershock forecast information and communication needs. The exploratory study also aimed to gather feedback on aftershock scenarios, an alternative form for communicating the forecast. The qualitative study involved workshops with emergency managers, public health officials, and members of the public in Christchurch. Key findings for long-term communication throughout an earthquake sequence include: 1. divergent earthquake experiences affect aftershock communication response and information needs; 2. understanding aftershock sequence behavior is foundational to sense-making when large aftershocks occur; 3. strategic earthquake sequence updates from the trusted science agency and local agencies could serve as important reminders for earthquake preparedness; 4. communication of aftershock forecast uncertainty could aid with both the credibility of the information and living with uncertainty, and 5. inclusion of impact information and preparedness advice into aftershock forecast scenarios could provide links to actionable information. The paper derives implications for research and practice of long-term communications during an aftershock sequence.

Christchurch↗

USGS1977

Factors limiting the sensitivity and dynamic range of a seismic system employing analog magnetic tape recording and a seismic amplifier with adjustable gain settings and several output levels

In the course of modernizing the low-speed-tape-recorder portable seismic systems and considering the possibilities for the design of a cassette-tape-recorder seismic refraction system, the factors that limit the sensitivity and dynamic range of such systems have been reviewed. These factors will first be stated briefly, and then their influence on systems such as the new 5-day-tape seismic system will be examined in more detail. To fix ideas, we shall assume that the system consists of the following elements: 1. A seismic sensor: usually a moving coil inertial seismometer with a period of about 1 second, a coil resistance of about 5000 ohms, and an effective motor constant of 1.0 V/cm/sec (across a 10K load terminating the seismometer sensitivity-and-damping-adjustment resistive network). 2. A seismic amplifier/voltage controlled oscillator unit made up of the following components: a) A fixed gain preamplifier with an input resistance of 10K and an internal noise level of 0.5 muVpp referred to the preamp input (0.1 Hz <= freq. <= 30 hz). b) An adjustable gain (0 to 42 db in 6 db steps) intermediate amplifier c) One or more fixed gain output amplifiers. d) Two sections of 6 db/octave bandpass filter serving to couple the 3 amplifier stages together. e) Voltage controlled oscillators for each output amplifier to produce modulated FM carriers for recording on separate tape tracks or modulated FM subcarriers for subsequent multiplexing and direct recording on tape in the California Network format. 3. An analog magnetic tape recorder: e.g. the PI 5100 (15/80 ips recording in the FM mode or in the direct mode with the 'broad-band' variant-of the Cal Net multiplex system, or 15/16 ips recording in the direct mode with the standard Cal Net multiplex system), or the Sony TC-126 cassette recorder operating in the direct record mode with the standard Cal Net multiplex system. 4. Appropriate magnetic tape playback equipment: e.g., the Bell and Howell 3700-B for the PI-5100 or the Sony TC 126 for its own tapes. 5. Appropriate discriminators (employing subtractive compensation, at least for the multiplexed systems) to restore the data signals to their original forms. 6. An A/D convertor to digitize the seismic signals for computer processing and/or a strip chart recorder (e.g., the Siemens Oscillomink) for playout of the data.

Open-File Report↗

USGS2011

Cenozoic tectonic reorganizations of the Death Valley region, southeast California and southwest Nevada

The Death Valley region, of southeast California and southwest Nevada, is distinct relative to adjacent regions in its structural style and resulting topography, as well as in the timing of basin-range extension. Cenozoic basin-fill strata, ranging in age from greater than or equal to 40 to approximately 2 million years are common within mountain-range uplifts in this region. The tectonic fragmentation and local uplift of these abandoned basin-fills indicate a multistage history of basin-range tectonism. Additionally, the oldest of these strata record an earlier, pre-basin-range interval of weak extension that formed broad shallow basins that trapped sediments, without forming basin-range topography. The Cenozoic basin-fill strata record distinct stratigraphic breaks that regionally cluster into tight age ranges, constrained by well-dated interbedded volcanic units. Many of these stratigraphic breaks are long recognized formation boundaries. Most are angular unconformities that coincide with abrupt changes in depositional environment. Deposits that bound these unconformities indicate they are weakly diachronous; they span about 1 to 2 million years and generally decrease in age to the west within individual basins and regionally, across basin boundaries. Across these unconformities, major changes are found in the distribution and provenance of basin-fill strata, and in patterns of internal facies. These features indicate rapid, regionally coordinated changes in strain patterns defined by major active basin-bounding faults, coincident with step-wise migrations of the belt of active basin-range tectonism. The regionally correlative unconformities thus record short intervals of radical tectonic change, here termed "tectonic reorganizations." The intervening, longer (about 3- to 5-million-year) interval of gradual, monotonic evolution in the locus and style of tectonism are called "tectonic stages." The belt of active tectonism in the Death Valley region has abruptly stepped westward during three successive tectonic reorganizations that intervened between four stages of basin-range tectonism, the youngest of which is ongoing. These three tectonic reorganizations also intervened between four stages of volcanic activity, each of which has been distinct in the compositions of magmas erupted, in eruption rates, and in the locus of volcanic activity—which has stepped progressively westward, in close coordination with the step-wise migrations in the locus of basin-range extension. The timing of the Cenozoic tectonic reorganizations in the Death Valley region correlates closely with the documented timing of episodic reorganizations of the boundary between the Pacific and North American plates, to the west and southwest. This supports models that explain the widely distributed transtensional tectonism in southwestern North America since approximately 40 million years ago as resulting from traction imposed by the adjacent, divergent Pacific plate.

California;Nevada↗

USGS2014

Chemical and biological quality of water in Grand Lake St. Marys, Ohio, 2011-12, with emphasis on cyanobacteria

Grand Lake St. Marys (GLSM) is a shallow lake in northwest Ohio, which is about 9 miles long and 3 miles wide with depths averaging less than 8 feet. Cyanobacteria blooms are common in GLSM, and high concentrations of microcystins—toxins produced by cyanobacteria—have been documented therein. During 2011–12, the U.S. Geological Survey collected 11 sets of water samples at 6 locations in the lake. The water samples were analyzed for concentrations of nutrients, chlorophyll, and microcystin and to determine plankton community structure and abundance. Analysis by quantitative polymerase chain reaction (qPCR) and quantitative reverse-transcription polymerase chain reaction (qRT-PCR) was used to identify the relations between microcystin concentrations and Planktothrix and Microcystis genotypes (toxic versus non-toxic). The qPCR analysis targets deoxyribonucleic acid (DNA) genes and quantifies the potential for toxin production, whereas the qRT-PCR analysis targets ribonucleic acid (RNA) transcripts and quantifies the expression of the toxin gene. Water samples were collected six times at one site for analyses of major ions and trace elements. In addition, field measurements were made to determine transparency, temperature, dissolved oxygen, pH, and specific conductance of the water. GLSM is shallow with a long fetch, which contributes to the warm and turbid water conditions. Secchi-disk measurements generally ranged from 0.2 to 0.3 meters, and summer water temperatures in GLSM frequently exceed 25 degrees Celsius (°C), with peak temperatures greater than 30 °C. Dissolved oxygen readings below 0.5 milligrams per liter (mg/L) occurred at the lake bottom, which can lead to the internal recycling of phosphorus in the lake. Phytoplankton analyses indicated that GLSM is dominated by cyanobacteria with Planktothrix , the dominant genera during 2011–12. Nitrate ranged from 0.19 to 3.23 mg/L, although concentrations in most samples were less than 1 mg/L. Total nitrogen concentrations ranged from 1.86 to 5.42 mg/L. Orthophosphate (as P) concentrations ranged from less than 0.004 to 0.067 mg/L, although concentrations of most samples were less than 0.004 mg/L. Total phosphorus (as P) concentrations ranged from 0.12 to 0.43 mg/L. Microcystin concentrations ranged from 7.3 to 83 micrograms per liter. Microcystin concentrations were correlated to cyanobacteria biovolumes, and to concentrations of one ion (sodium) and three trace elements (molybdenum, antimony, and lithium). Concentrations of toxin genes ( mcyE ) determined by qPCR were consistently low for Microcystis and consistently high for Planktothrix throughout both sampling years. Concentrations of cyanobacteria found by qPCR were correlated to microcystin concentrations, cyanobacteria biovolumes, selected nutrient concentrations, and other parameters. Results from qRT-PCR assays showed that toxin gene expression was predominantly from the genus Planktothrix , and concentrations of the RNA transcript varied throughout the two sampling years. A number of conditions that may play a role in the dominance of Planktothrix and the production of microcystin were identified including water temperature; low-light transmission; low concentrations of silica and manganese; and relatively high concentrations of sodium, sulfate, and the trace elements of strontium, vanadium, and boron.

Ohio↗

USGS2012

Landsat's international partners

Since the launch of the first Landsat satellite 40 years ago, International Cooperators (ICs) have formed a key strategic alliance with the U.S. Geological Survey (USGS) to not only engage in Landsat data downlink services but also to enable a foundation for scientific and technical collaboration. The map below shows the locations of all ground stations operated by the United States and IC ground station network for the direct downlink and distribution of Landsat 5 (L5) and Landsat 7 (L7) image data. The circles show the approximate area over which each station has the capability for direct reception of Landsat data. The red circles show the components of the L5 ground station network, the green circles show components of the L7 station network, and the dashed circles show stations with dual (L5 and L7) status. The yellow circles show L5 short-term ("campaign") stations that contribute to the USGS Landsat archive. Ground stations in South Dakota and Australia currently serve as the primary data capture facilities for the USGS Landsat Ground Network (LGN). The Landsat Ground Station (LGS) is located at the USGS Earth Resources Observation and Science (EROS) Center in Sioux Falls, South Dakota. The Alice Springs (ASN) ground station is located at the Geoscience Australia facility in Alice Springs, Australia. These sites receive the image data, via X-band Radio Frequency (RF) link, and the spacecraft housekeeping data, via S-band RF link. LGS also provides tracking services and a command link to the spacecrafts.

Argentina;Australia;Brazil;Canada;China;Germany;In↗

USGS2021

Relating Tmax and hydrogen index to vitrinite and solid bitumen reflectance in hydrous pyrolysis residues: Comparisons to natural thermal indices

Vitrinite reflectance (VR o ; %) generally is considered the most reliable technique to determine the thermal maturity of sedimentary rocks. However, it is a time-consuming process to collect reflectance (R o ; %) measurements and is subjective to the interpretation of each trained technician, who must be able to discern between vitrinite and solid bitumen and other organic matter types. Inadvertent misidentification of solid bitumen for vitrinite can lead to reports of ‘suppressed’ VR o , especially at lower thermal maturities (< 1.0% R o ). Programmed pyrolysis data, such as T max and hydrogen index (HI), are comparatively inexpensive and more time-efficient to obtain than R o data and are determined by instrument settings, rather than by operator decision, and are therefore independent of operator-based training or experience bias. This study uses hydrous pyrolysis (HP) residues from various coals and shales to relate measured VR o and solid bitumen reflectance (BR o ; %) values to their respective T max and HI values and determines whether these relationships can be used as a proxy to calculate R o in naturally matured samples. Although the estimation of R o is not always accurate, the results demonstrate that relational equations for shales and coals derived from the T max and HI data of HP residues can effectively calculate R o in natural series. Approximately 60% of calculated R o from T max and 83% of calculated R o from HI relational equations are within interlaboratory reproducibility limits (± 0.2% shale BR o ; ± 0.06% coal VR o ) when compared to their respective measured R o values from natural series. Variables that may affect accuracy of the applied relational equations include variable sedimentary organic matter composition of samples, differences of maturation reaction kinetics of the sedimentary organic matter in experimental versus natural settings, and decreasing reliability of all thermal proxy measurements at higher maturities.

International Journal of Coal Geology↗

USGS2012

Groundwater quality in the Indian Wells Valley, California

Groundwater provides more than 40 percent of California’s drinking water. To protect this vital resource, the State of California created the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The Priority Basin Project of the GAMA Program provides a comprehensive assessment of the State’s groundwater quality and increases public access to groundwater-quality information. Indian Wells Valley is one of the study areas being evaluated. The Indian Wells study area is approximately 600 square miles (1,554 square kilometers) and includes the Indian Wells Valley groundwater basin (California Department of Water Resources, 2003). Indian Wells Valley has an arid climate and is part of the Mojave Desert. Average annual rainfall is about 6 inches (15 centimeters). The study area has internal drainage, with runoff from the surrounding mountains draining towards dry lake beds in the lower parts of the valley. Land use in the study area is approximately 97.0 percent (%) natural, 0.4% agricultural, and 2.6% urban. The primary natural land cover is shrubland. The largest urban area is the city of Ridgecrest (2010 population of 28,000). Groundwater in this basin is used for public and domestic water supply and for irrigation. The main water-bearing units are gravel, sand, silt, and clay derived from the Sierra Nevada to the west and from the other surrounding mountains. Recharge to the groundwater system is primarily runoff from the Sierra Nevada and to the west and from the other surrounding mountains. Recharge to the groundwater system is primarily runoff from the Sierra Nevada and direct infiltration from irrigation and septic systems. The primary sources of discharge are pumping wells and evapotranspiration near the dry lakebeds. The primary aquifers in the Indian Wells study area are defined as those parts of the aquifers corresponding to the perforated intervals of wells listed in the California Department of Public Health database. Public-supply wells in Indian Wells Valley are completed to depths between 240 and 800 feet (73 to 244 meters), consist of solid casing from the land surface to a depth of 180 to 260 feet (55 to 79 meters), and are screened or perforated below the solid casing.

California↗

USGS2010

Metallogenesis and Tectonics of Northeast Asia

The major purposes of this chapter are to provide (1) an overview of the regional geology, tectonics, and metallogenesis of Northeast Asia for readers who are unfamiliar with the region, (2) a general scientific introduction to the succeeding chapters of this volume, and (3) an overview of the methodology of metallogenic and tectonic analysis used in this study. We also describe how a high-quality metallogenic and tectonic analysis, including construction of an associated metallogenic-tectonic model will greatly benefit other mineral resource studies, including synthesis of mineral-deposit models; improve prediction of undiscovered mineral deposit as part of a quantitative mineral-resource-assessment studies; assist land-use and mineral-exploration planning; improve interpretations of the origins of host rocks, mineral deposits, and metallogenic belts, and suggest new research. Research on the metallogenesis and tectonics of such major regions as Northeast Asia (eastern Russia, Mongolia, northern China, South Korea, and Japan) and the Circum-North Pacific (the Russian Far East, Alaska, and the Canadian Cordillera) requires a complex methodology including (1) definitions of key terms, (2) compilation of a regional geologic base map that can be interpreted according to modern tectonic concepts and definitions, (3) compilation of a mineral-deposit database that enables a determination of mineral-deposit models and clarification of the relations of deposits to host rocks and tectonic origins, (4) synthesis of a series of mineral-deposit models that characterize the known mineral deposits and inferred undiscovered deposits in the region, (5) compilation of a series of metallogenic-belt belts constructed on the regional geologic base map, and (6) construction of a unified metallogenic and tectonic model. The summary of regional geology and metallogenesis presented here is based on publications of the major international collaborative studies of the metallogenesis and tectonics of Northeast Asia that have been led by the U.S. Geological Survey (USGS). These studies have produced two broad types of publications (1) a series of regional geologic, mineral-deposit, and metallogenic-belt maps, with companion descriptions of the region, and (2) a suite of metallogenic and tectonic analyses of the same region. The study area consists of eastern Russia (most of eastern Siberia and the Russian Far East), Mongolia, northern China, South Korea, Japan, and adjacent offshore areas. The major cooperative agencies are the Russian Academy of Sciences; the Academy of Sciences of the Sakha Republic (Yakutia); VNIIOkeangeologia and Ministry of Natural Resources of the Russian Federation; the Mongolian Academy of Sciences; the Mongolian University of Science and Technology; the Mongolian National University; Jilin University, Changchun, People's Republic of China, the China Geological Survey; the Korea Institute of Geosciences and Mineral Resources; the Geological Survey of Japan/AIST; the University of Texas, Arlington, and the U.S. Geological Survey (USGS). This study builds on and extends the data and interpretations from a previous project on the Major Mineral Deposits, Metallogenesis, and Tectonics of the Russian Far East, Alaska, and the Canadian Cordillera conducted by the USGS, the Russian Academy of Sciences, the Alaska Division of Geological and Geophysical Surveys, and the Geological Survey of Canada. The major products of this project were summarized by Naumova and others (2006) and are described in appendix A.

Professional Paper↗

USGS2012

Science implementation of Forecast Mekong for food and environmental security

Forecast Mekong is a significant international thrust under the Delta Research and Global Observation Network (DRAGON) of the U.S. Geological Survey (USGS) and was launched in 2009 by the U.S. Department of State and the Foreign Ministers of Cambodia, Laos, Thailand, and Vietnam under U.S. Department of State Secretary Hillary R. Clinton's Lower Mekong Initiative to enhance U.S. engagement with countries of the Lower Mekong River Basin in the areas of environment, health, education, and infrastructure. Since 2009, the USGS has worked closely with the U.S. Department of State; personnel from Cambodia, Laos, Thailand, and Vietnam; nongovernmental organizations; and academia to collect and use research and data from the Lower Mekong River Basin to provide hands-on results that will help decisionmakers in future planning and design for restoration, conservation, and management efforts in the Lower Mekong River Basin. In 2012 Forecast Mekong is highlighting the increasing cooperation between the United States and Lower Mekong River Basin countries in the areas of food and environmental security. Under the DRAGON, Forecast Mekong continues work in interactive data integration, modeling, and visualization system by initiating three-dimensional bathymetry and river flow data along with a pilot study of fish distribution, population, and migratory patterns in the Lower Mekong River Basin. When fully developed by the USGS, in partnership with local governments and universities throughout the Mekong River region, Forecast Mekong will provide valuable planning tools to visualize the consequences of climate change and river management.

Phnom Penh↗

USGS2020

Procedures for developing multi-period response spectra at non-conterminous United States sites

This study complements proposals to the Provisions Update Committee of the Building Seismic Safety Council that would incorporate multi-period response spectra (MPRS) in the 2020 edition of the NEHRP Recommended Seismic Provisions for New Buildings and Other Structures (2020 NEHRP Provisions) and related proposals to the ASCE 7-22 Seismic Subcommittee of the American Society of Civil Engineers for incorporation of MPRS in ASCE Standard, ASCE/SEI 7-22, Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE 7-22). Ultimately, the intent is that the proposed MPRS and related design requirements of ASCE 7-22 would be adopted, by reference, as part of the 2024 International Building Code. The technical basis and associated methods herein enable the U.S. Geological Survey (USGS) to develop MPRS for sites in non-conterminous U.S. regions for which seismic hazard analyses have not yet been updated by the USGS to fully define all 22 periods and eight site classes of interest in the MPRS related proposals for the 2020 NEHRP Provisions and ASCE 7-22. These regions include Alaska, Hawaii, Guam and the Northern Mariana Islands, Puerto Rico and the U.S. Virgin Islands, and American Samoa. The methods developed can be used to derive MPRS using only the three currently available ground motion parameters S S , S 1 , and T L for all nonconterminous United States regions of interest. The methods include models that characterize generic shapes of Risk-Targeted Maximum Considered Earthquake (MCE R ) ground motions as a function of these three parameters. For deriving MPRS that represent probabilistic MCE R ground motions, models are based on statistical analyses of large sample sets of probabilistic MCE R response spectra for Western United States (WUS) and Cascadia sites in California, Oregon, Washington (including Puget Sound), Idaho, and Nevada. For deriving MPRS that represent deterministic MCE R ground motions, models are based on sets of deterministic MCE R response spectra calculated using WUS shallow crustal ground motion models for earthquake magnitudes and shaking levels typical of sites governed by deterministic MCE R ground motions.

Alaska, American Samoa, Hawaii, Guam and the North↗

USGS1991

Report of 1st discussion group: The last interglacial in high latitudes of the Northern Hemisphere: Terrestrial and marine evidence

The paleoclimatic informations preserved at some selected sites from high northern latitudes correlative with the last interglacial maximum of Isotopic Substage 5e have been compiled on a hemisphere scale. The mapped compilation reveals much warmer climate conditions on average than present in both terrestrial and marine environments, and indicates a northward shift of subpolar and boreal bioclimatic zones. The data also suggest that temperature and precipitation gradients were significantly different than those of the Holocene, with particularly efficient latitudinal and eastward transport of warm air masses. The paleoenvironmental and paleoclimate trends through the last interglacial sensu lato (Isotopic Stage 5) are more difficult to assess because the chronostratigraphical framework is poorly constrained. Nevertheless, the data suggest important regionalism in the climatostratigraphical trends. In particular, the large amplitude climatic cyclicity that characterizes the last interglacial of Europe is barely observed elsewhere. Moreover, by the end of the last interglacial (Isotopic Substage 5a), conditions slightly cooler than present are recorded in western Europe, while relatively warm conditions, similar to today, apparently prevailed in circumpolar regions adjacent to the North Atlantic despite the onset of ice growth. The last interglacial provides paleosynoptic situations, unlike those of the present, that may contribute to understanding interactions within the environmental system on a hemispheric scale. There is, however, an imperative need for uniformization of data sets and for more accurate chronological control on regional scales.

Quaternary International↗

USGS2006

Hydrogeologic Framework and Ground Water in Basin-Fill Deposits of the Diamond Valley Flow System, Central Nevada

The Diamond Valley flow system, an area of about 3,120 square miles in central Nevada, consists of five hydrographic areas: Monitor, Antelope, Kobeh, and Diamond Valleys and Stevens Basin. Although these five areas are in a remote part of Nevada, local government officials and citizens are concerned that the water resources of the flow system eventually could be further developed for irrigation or mining purposes or potentially for municipal use outside the study area. In order to better understand the flow system, the U.S. Geological Survey in cooperation with Eureka, Lander, and Nye Counties and the Nevada Division of Water Resources, is conducting a multi-phase study of the flow system. The principal aquifers of the Diamond Valley flow system are in basin-fill deposits that occupy structural basins comprised of carbonate rocks, siliciclastic sedimentary rocks, igneous intrusive rocks, and volcanic rocks. Carbonate rocks also function as aquifers, but their extent and interconnections with basin-fill aquifers are poorly understood. Ground-water flow in southern Monitor Valley is from the valley margins toward the valley axis and then northward to a large area of discharge by evapotranspiration (ET) that is formed south of a group of unnamed hills near the center of the valley. Ground-water flow from northern Monitor Valley, Antelope Valley, and northern and western parts of Kobeh Valley converges to an area of ground-water discharge by ET in central and eastern Kobeh Valley. Prior to irrigation development in the 1960s, ground-water flow in Diamond Valley was from valley margins toward the valley axis and then northward to a large discharge area at the north end of the valley. Stevens Basin is a small upland basin with internal drainage and is not connected with other parts of the flow system. After 40 years of irrigation pumping, a large area of ground-water decline has developed in southern Diamond Valley around the irrigated area. In this part of Diamond Valley, flow is from valley margins toward the irrigated area. In northern Diamond Valley, flow appears to remain generally northward to the large discharge area. Subsurface flow through mountain ranges has been identified from Garden Valley (outside the study area) through the Sulphur Springs Range to Diamond Valley and from southeastern Antelope Valley through the Fish Creek Range to Little Smoky Valley (outside the study area). In both cases, the flow is probably through carbonate rocks. Ground-water levels in the Diamond Valley flow system have changed during the past 40 years. These changes are the result of pumpage for irrigation, municipal, domestic, and mining uses, mostly in southern Diamond Valley, and annual and longer-term variations in precipitation in undeveloped parts of the study area. A large area of ground-water decline that underlies an area about 10 miles wide and 20 miles long has developed in the basin-fill aquifer of southern Diamond Valley. Water levels beneath the main part of the irrigated area have declined as much as 90 feet. In undeveloped parts of the study area, annual water-level fluctuations generally have been no more than a few feet.

Scientific Investigations Report↗