Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Electronics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81Linked to original sources
USGS1996

Geologic sources of asbestos in Seattle's tolt reservoir

Water from Seattle's South Fork Tolt Reservoir contains chrysotile and amphibole asbestos fibers, derived from natural sources. Using optical petrographic techniques, X-ray diffraction, and scanning electron microscopy, we identified the geologic source of these asbestiform minerals within the watershed. No asbestos was found in the bedrock underlying the watershed, while both chrysotile and amphibole fibers were found in sediments transported by Puget-lobe glacial processes. These materials, widely distributed throughout the lower watershed, would be difficult to separate from the reservoir sediments. The probable source of this asbestos is in pods of ultramafic rock occurring north of the watershed. Because asbestos is contained in widespread Pugetlobe glacial materials, it may be naturally distributed in other watersheds in the Puget Sound area.

Northwest Science↗
USGS1997

Factors controlling sulfur concentrations in volcanic apatite

Apatite crystals from two types of samples were analyzed by electron microprobe for 15 major and trace elements: (1) apatite in H2O- and S-saturated experimental charges of the 1982 El Chicho??n trachyandesite and (2) apatite in volcanic rocks erupted from 20 volcanoes. The SO3 contents of the experimental apatite increase with increasing oxygen fugacity (fo2), from ???0.04 wt% in reduced charges buffered by fayalite-magnetite-quartz (FMQ), to 1.0-2.6 wt% in oxidized charges buffered by manganosite-hausmanite (MNH) or magnetite-hematite (MTH). The SO3 contents of MNH- and MTH-buffered apatite also generally increase with increasing pressure from 2 to 4 kbar and decreasing temperature from 950 to 800??C. The partition coefficient for SO3 between apatite and oxidized melt increases with decreasing temperature but appears to be independent of pressure. Apatites in volcanic rocks show a wide range of SO3 contents (<0.04 to 0.63 wt%). Our sample set includes one group known to contain primary anhydrite and a second group inferred to have been free of primary anhydrite. No systematic differences in apatite S contents are observed between these two groups. Our study was initiated to define the factors controlling S contents in apatite and to evaluate the hypothesis that high S contents in apatite could be characteristic of S-rich anhydrite-bearing magmas such as those erupted from El Chicho??n in 1982 and Pinatubo in 1991. This hypothesis is shown to be invalid, probably chiefly a consequence of the slow intra-crystaline diffusion that limits re-equilibration between early formed apatite and the evolving silicate melt. Contributing factors include early crystallization of most apatite over a relatively small temperature interval, common late-stage magmatic enrichment of S, progressive oxidation during magmatic evolution, and strong controls on S contents in apatite exerted fo2, temperature, and pressure.

American Mineralogist↗
USGS1995

Impedance spectra of hot, dry silicate minerals and rocks: qualitative interpretation of spectra

Impedance spectroscopy helps distinguish the contributions that grain interiors and grain boundaries make to electrical resistance of silicate minerals and rocks. Olivine, orthopyroxene, clinopyroxenes, and both natural and synthetic clinopyroxenite were measured. A network of electrical elements is presented for use in interpreting impedance spectra and conductive paths in hot or cold, wet or dry, minerals and rocks at any pressure. In dry rocks, a series network path predominates; in wet rocks, aqueous pore fluid and crystals both conduct. Finite resistance across the sample-electrode interface is evidence that electronic charge carriers are present at the surface, and presumably within, the silicate minerals and rocks measured. -from Authors

American Mineralogist↗
USGS1997

A hydrous Ca-bearing magnesium carbonate from playa lake sediments, Salines Lake, Spain

Sediments of playa Lake Salines, SE, Spain, contain a carbonate mineral characterized by X-ray diffraction peaks very similar to, but systematically shifted from those of pure magnesite. Analyses (SEM, IR and Raman spectroscopy, DTA, TGA, and ICP) indicate the mineral is a hydrous Ca-bearing magnesium carbonate with the chemical formula (Mg0.92,Ca0.08)CO3??3H2O. Thermal characteristics of the mineral are similar to those of other known hydrated magnesium carbonates. X-ray and electron diffraction data suggests a monoclinic system (P21/n space group) with unit-cell parameters of a = 6.063(6), b = 10.668(5), and c = 6.014(4) A?? and ?? = 107.28??.

American Mineralogist↗
USGS1998

The role of freshwater habitats for the reproduction of common bream Abramis brama (L.) in a brackish water system

Abundance and biomass data for juveniles and adults, length frequency histograms and the electron microprobe analysis (EPMA) of otoliths were used to indicate density, migration and reproduction of common bream Abramis brama in the Kiel Canal drainage, Germany. The reproduction of common bream was primarily restricted to two types of spawning habitats: one in the Haaler Au, a freshwater tributary and another in shallow, oligohaline portion of the main Canal. Both spawning habitats were morphologically characterized as shallow with submerged vegetation. During April to June concentrations of spawners were observed, whereas age-0 common bream dominated from August through December. The distribution of age-0 common bream was primarily restricted to fresh and oligohaline waters. Outside the spawning season, the distribution of common bream was less obvious. Adult fish were more widely distributed within the Canal, indicating a tolerance for higher salinities. During the spawning season common bream seem to show an exceptional mobility between spawning and feeding habitats, which are denoted by different salinities.

Polskie Archiwum Hydrobiologii↗
USGS1998

Needle twins and right-angled twins in minerals: comparison between experiment and theory

Transformation twinning in minerals forms isolated twin walls, intesecting walls with corner junctions, and wedge-shaped twins as elements of hierarchical patterns. When cut perpendicular to the twin walls, the twins have characteristic shapes, right-angled and needle-shaped wall traces, which can be observed by transmission electron microscopy or by optical microscopy. Theoretical geometries of wall shapes recently derived for strain-related systems should hold for most displacive and order-disorder type phase transitions: 1) right-angled twins show curved junctions; 2) needle-shaped twins contain flat wall segments near the needle tip if the elastic behaviour of the mineral is dominated by its anisotroyp; 3) additional bending forces and pinning effects lead to curved walls near the junction that make the needle tip appear more blunt. Bent right-angled twins were analyzed in Gd2(MoO4)3. Linear needle tips were found in WO3, [N(CH3)4]2.ZnBr4 CrAl, BiVO4, GdBa2Cu3O7, and PbZrO. Parabolic tips occur in K2Ba(NO2)4, and GeTe whereas exponential curvatures appear in BaTiO3, KSCN, Pb3(PO4)2, CaTiO3, alkali feldspars, YBa2Cu3O7, and MnAl. The size and shape of the twin microstructure relates to its formation during the phase transition and the subsequent annealing history. The mobility of the twin walls after formation depends not only on the thermal activation but also on the structure of the wall, which may be pinned to impurities on a favorable structural site. Depinnign energies are often large compared with thermal energies for diffusion. This leads to kinetic time scales for twin coarsening that are comparable to geological time scales. Therefore, transformation twins that exhibit needle domains not only indicate that the mineral underwent a structural phase transition but also contain information about its subsequent geological history.

American Mineralogist↗
USGS1998

Phosphovanadylite: a new vanadium phosphate mineral with a zeolite-type structure

Phosphovanadylite, whose simplified formula is (Ba,Ca,K,Na)x([(Va,Al)4P2(P,OH)16].12H2), is a new vanadium phosphate zeolite mineral found in the Phosphoria Formation at Monsanto's Enoch Valley Mine, Soda Springs, Idaho. Its formula in more detail is (Ba0.38Ca0.20K0.006Na0.02)??0.66 [P2(V3.44Al0.046)??3.90O10.34(OH)5.66] .12H2O. The drusy mineral occurs as pale greenish-blue euhedral cubes (20-50 ??m edge) coating phosphatic, organic-rich mudstone. The chemical composition determined by electron microprobe is (in weight percent) V-28.02, P-9.91, Al-1.97, Ca-1.31, Ba-8.28, Cd-0.09, Zn-0.34, Na-0.15, K-0.73, O-46.57, and F-0.03. The index of refraction is nD = 1.566 (4) and specific gravity is 2.16 (3). The X-ray powder pattern shows strong reflections at 3.16 A (422), 2.58 (600), 2.44 (620), and 7.73 (200), which are indexed on the basis of a cubic body-centered unit cell with a = 15.470 (4) A. From the single-crystal structure analysis, its space group was determined to be I43m, Z = 6, and its structure consists of V4O18 16 octahedral clusters linked to each other by P atoms to form a cubic lattice, creating cavities 7.0 and 5.5 A in diameter where mainly H2O resides. Final residual indexes are R = 0.066, Rw = 0.061, goodness-of-fit = 0.75, and 93 observations and 24 parameters.

American Mineralogist↗
USGS1999

Simmonsite, Na2LiAlF6, a new mineral from the Zapot amazonite-topazzinnwaldite pegmatite, Hawthorne, Nevada, U.S.A

Simmonsite, Na2LiAlF6, a new mineral of pegmatitic-hydrothermal origin, occurs in a late-stage breccia pipe structure that cuts the Zapot amazonite-topaz-zinnvvaldite pegmatite located in the Gillis Range, Mineral Co., Nevada, U.S.A. The mineral is intimately intergrown with cryolite, cryolithionite and trace elpasolite. A secondary assemblage of other alumino-fluoride minerals and a second generation of cryolithionite has formed from the primary assemblage. The mineral is monoclinic, P21 or P21/m, a = 7.5006(6) A??, b = 7.474(1) A??, c = 7.503(1) A??, ??= 90.847(9) ??, V=420.6(1) A??3, Z = 4. The four strongest diffraction maxima [d(A??), likl, I/I100] are (4.33, 111 and 111, 100); (1.877, 400 and 004, 90); (2.25, 13T, 113, 131 and 311, 70); and (2.65, 220, 202, 022, 60). Simmonsite is pale buff cream with white streak, somewhat greasy, translucent to transparent, Mohs hardness of 2.5-3, no distinct cleavage, subconchoidal fracture, no parting, not extremely brittle, Dm is 3.05(2) g/cm3, and Dc is 3.06(1) g/cm3. The mineral is biaxial, very nearly Isotropie, N is 1.359(1) for ?? = 589 nm, and birefringence is 0.0009. Electron microprobe analyses gave (wt%) Na = 23.4, Al = 13.9, F = 58.6, Li = 3.56 (calculated), with a total of 99.46. The empirical formula (based on 6 F atoms) is Na1.98Li1.00 ooAl|ooF6. The crystal structure was not solved, presumably because of unit-cell scale twinning, but similarities to the perovskite-type structure exist. The mineral is named for William B. Simmons, Professor of Mineralogy and Petrology, University of New Orleans, New Orleans.

American Mineralogist↗
USGS2000

The crystal structure of tetranatrolite from Mont Saint-Hilaire, Quebec, and its chemical and structural relationship to paranatrolite and gonnardite

The structure of tetranatrolite from Mont Saint-Hilaire, Quebec (U.S. National Museum sample R1830) with a = 13.197(7) A, c = 6.630(9) A, and space group I42d, was refined using single-crystal X-ray data. A representative formula of tetranatrolite determined from electron microprobe analysis is Na12.50K0.01Ca2.93Sr0.11Al19.09 Si20.91O79.74??nH2O. The structure has the basic natrolite Si-Al-O framework configuration with Na, Ca, Sr, and K residing within inter-framework cages. Aluminum is disordered over the T1 and T2 tetrahedral sites, with T2 > T1. Water molecules O4 and O5 coordinate the intercage atoms and have high displacement parameters, indicating disorder within the cages. The Mont Saint-Hilaire tetranatrolite structure is compared to four previously determined structures, two tetranatrolite samples from Khibiny and Lovozero, Russia and two "gonnardite" samples from Tvedalen, Norway and Gignat, France. Observations are given to indicate that the Norwegian sample deduced to be tetranatrolite rather than gonnardite. Although the crystal structures of tetranatrolite and gonnardite are very similar, it is shown that the tetranatrolite compositions differ significantly from those of gonnardite. The tetranatrolite composition series varies along the join Na16Al16Si24O80-Na12 Ca4Al20Si20O80, and is represented by the formula Na16-xCaxAl16+xSi24-x O80??nH2O, where x extends from approximately 2.4 to 3.9. In contrast, gonnardites from Arkansas and Austria have compositions that vary along the join Na16Al16Si24O80-Na4 Ca8Al20Si20O80, which are represented by the formula ???xNa16-3xCa2xAl16+x Si24-xO80??nH2O and where ??? indicates vacant intercage cation sites and x varies from approximately 0.3 to 3.2. Tetranatrolite is a dehydration product of paranatrolite and probably does not have a true stability field.

American Mineralogist↗
USGS2000

Microscopic character of marine sediment containing disseminated gas hydrate. Examples from the Blake Ridge and the Middle America Trench

The presence of disseminated gas hydrate was inferred based on pore fluid geochemistry and downhole logging data, but was rarely observed at Ocean Drilling Program (ODP) Leg 164 (Blake Ridge), and Leg 170 (Middle America Trench, offshore from Costa Rica) drilling sites. Gas hydrate nucleation is likely to occur first in larger voids rather than in constricted pore space, where capillary forces depress the temperature-pressure stability field for gas hydrate formation. Traditional macroscopic descriptions of sediment fail to detect the microscopic character of primary and secondary porosity in sediment hosting disseminated gas hydrate. Light transmission and scanning electron microscopy of sediments within and below the depth of gas hydrate occurrences reveal at least four general types of primary and secondary porosity: (1) microfossils (diatoms, foraminifera, and spicules) void of infilling sediment, but commonly containing small masses of pyrite framboids; (2) infauna burrows filled with unconsolidated sand and or microfossil debris; (3) irregularly shaped pods of nonconsolidated framboidial pyrite; and (4) nonlithified volcanic ash.

Conference Paper↗
USGS2000

Stanford-USGS shrimp-RG ion microprobe: A new approach to determining the distribution of trace elements in coal

The distribution of Cr and other trace metals of environmental interest in a range of widely used U.S. coals was investigated using the Stanford-USGS SHRIMP-RG ion microprobe . Using the oxygen ion source, concentrations of Cr (11 to 176 ppm), V (23 to 248 ppm), Mn (2 to 149 ppm), Ni (2 to 30 ppm), and 13 other elements were determined in illite/smectite, a group of clay minerals commonly present in coal. The results confirm previous indirect or semi-quantitative determinations indicating illite/smectite to be an important host of these metals. Calibration was achieved using doped aluminosilicate-glass synthetic standards and glasses prepared from USGS rock standards. Grains for analysis were identified optically, and confirmed by 1) precursory electron microprobe analysis and wavelength-dispersive compositional mapping, and 2) SHRIMP-RG major element data obtained concurrently with trace element results. Follow-up investigations will focus on the distribution of As and other elements that are more effectively ionized with the cesium primary beam currently being tested.

ACS Division of Fuel Chemistry, Preprints↗
USGS2003

Morphological variation in glochidia shells of six species of Elliptio from Gulf of Mexico and Atlantic Coast drainages in the southeastern United States

The genus Elliptio, with 36 currently recognized species, is the largest genus in the family Unionidae in North America. The genus is represented by two species, Elliptio crassidens and E. dilatata, in the Interior Basin and 34 species in drainages of the eastern Gulf of Mexico and Atlantic Coast. The paucity and variation of conchological characters in the genus Elliptio makes it extremely difficult to define species and determine relationships. We examined glochidia from six species of Elliptio in an effort to determine if there are useful characteristics for species level identification and/or characters for identification of species groups. Elliptio species were selected to represent different morphological groups from four drainages in the southeastern United States. The glochidia from E. crassidens, E. dariensis, E. hopetonensis, E. icterina, E. shepardiana, and E. mcmichaeli were qualitatively compared, using scanning electron microscopy, with each other and with descriptions of these and other Elliptio glochidia described in the literature. Two groups were identified. The crassidens group, including E. crassidens, E. dariensis, and E. mcmichaeli, had subtriangular glochidia with a triangular styliform hook extending from the ventral margin of the valve and rough exterior valve sculpturing. Adults of this group had wrinkled or corrugated sculpturing on the posterior slope of the shell. The complanata group, including E. hopetonensis, E. icterina, and E. shepardiana, had subelliptical glochidia with a broad flange extending the entire ventral margin and loose-looped exterior valve sculpturing. Adults of this group lack sculpturing on the posterior slope of the shell. Differences in glochidial morphometrics were found, however, additional work is needed to determine if they are reliable for species level identification.

Proceedings of the Biological Society of Washingto↗
USGS2003

Testing laser-based sensors for continuous in situ monitoring of suspended sediment in the Colorado River, Arizona

High-resolution monitoring of sand mass balance in the Colorado River below Glen Canyon Dam, Arizona, USA, is needed for environmental management. In the Grand Canyon, frequent collection of suspended-sediment samples from cableways is logistically complicated, costly and provides limited spatial and temporal resolution. In situ laser sensors were tested in the Colorado River as an alternative method for monitoring the river's suspended transport. LISST data were collected at a fixed-depth, near-shore site while isokinetic measurements were simultaneously made from a nearby cableway. Diurnal variations in LISST grain size and concentration data compared well with depth-integrated, cross-section data. Tbe LISST was also successfully used to electronically trigger an ISCO 6712 pump sampler to provide continuous monitoring during periods when suspended concentrations exceeded the LISST's measurement range. Initial results indicate that the LISST can provide useful high-resolution suspended-sediment data within the Colorado River, when optics are maintained on a weekly basis.

Arizona↗
USGS2003

Goldquarryite, a new Cd-bearing phosphate mineral from the Gold Quarry mine, Eureka County, Nevada

Goldquarryite, idealized formula CuCd2Al3(PO44F2(H2O)10(H2O 2, structure-derived formula (Cu0.70???0.30??1.00(Cd1.68Ca0.32??2.00Al3 (PO44F2(H2O)10[(H2O 1.60F0.40]??2.00, is triclinic, space group P1, with unit-cell parameters derived from crystal structure: a = 6.787(1), b = 9.082(2), c = 10.113(2) A??, ?? = 101.40(1)??, ?? = 104.27(1)??, ?? = 102.51(1)??, V = 568.7(3) A??3, a:b:c: = 0.7473:1:1.1135, Z = 1. The strongest seven reflections in the X-ray powder-diffraction pattern are [d(A??)(I)(hkl)]: 9.433(100)(001); 4.726(30)(002); 3.700(30)(022); 3.173(30b)(122, 113, 120, 003); 3.010(30)(122, 212); 2.896(30)(211); 2.820(50)(022). The mineral occurs on a single specimen collected from the 5,425-foot bench, Gold Quarry mine, Eureka County, Nevada, as isolated clusters of radiating sprays of crystals and as compact parallel crystal aggregates, which are both found on and between breccia fragments. Sprays and aggregates never exceed 3 mm in longest dimension and typically average about 0.5 mm in size. Goldquarryite is a late-stage supergene mineral associated with opal, carbonate-fluorapatite and hewettite, on a host rock composed principally of brecciated and hydrothermally rounded jasperoid fragments which have been lightly cemented by late-stage silicification. Individual euhedral crystals are acicular to bladed, elongate [100], with a length-to-width ratio of approximately 20:1; the maximum size is 1.5 mm but most crystals do not exceed 0.4 mm in length. Forms are {010}, {001} major and {100} very minor. The mineral is pleochroic; translucent (masses) to transparent (crystals); very pale blue to blue-gray (crystals) or blue (masses); with a white streak and a vitreous to glassy luster. Goldquarryite is brittle, lacks cleavage, has an irregular fracture, and is nonfluorescent; hardness (Mohs') is estimated at 3-4; measured density is 2.78(1) g/cm3 (sink-float techniques using methylene iodide-acetone mixtures), calculated density is 2.81 g/cm3 (for formula and unit-cell parameters derived from crystal structure). Optically, it is biaxial positive, ?? = 1.570, ?? = 1.573, ?? = 1.578; 2V (meas.) = ???30??, 2V (calc.) = 76??; dispersion r < v, strong. Average electron-microprobe analysis: K2O = 0.17, CuO = 5.33, CaO = 1.25, NiO = 0.23, ZnO = 0.05, CdO = 26.24, Al2O3 = 15.22, V2O3 = 0.05, P2O5 = 28.04, F = 3.63, H2O (calculated assuming stoichiometry) = [22.19], -O = F = -1.53, total = 100.87 weight %, corresponding to [(Cu0.66Ni0.03Zn0.01) ??0.70.

Mineralogical Record↗
USGS2007

Progress in the development of shallow-water mapping systems

The USGS (US Geological Survey) Coastal and Marine Geology has deployed an advance autonomous shallow-draft robotic vehicle, Iris, for shallow-water mapping in Apalachicola Bay, Florida. The vehicle incorporates a side scan sonar system, seismic-reflection profiler, single-beam echosounder, and global positioning system (GPS) navigation. It is equipped with an onboard microprocessor-based motor controller, delivering signals for speed and steering to hull-mounted brushless direct-current thrusters. An onboard motion sensor in the Sea Robotics vehicle control system enclosure has been integrated in the vehicle to measure the vehicle heave, pitch, roll, and heading. Three water-tight enclosures are mounted along the vehicle axis for the Edgetech computer and electronics system including the Sea Robotics computer, a control and wireless communications system, and a Thales ZXW real-time kinematic (RTK) GPS receiver. The vehicle has resulted in producing high-quality seismic reflection and side scan sonar data, which will help in developing the baseline oyster habitat maps.

Sea Technology↗
USGS2006

Mineralogical anomalies and their influences on elemental geochemistry of the main workable coal beds from the Dafang Coalfield, Guizhou, China

Mineralogy and geochemistry of the No. 11 Coal bed were investigated by using inductively-coupled plasma mass spectrometry (ICP-MS), X-ray fluorescence (XRF), scanning electron microscopy equipped with energy-dispersive X-ray (SEM-EDX), sequential chemical extraction procedure (SCEP), and optical microscopy. The results show that the No. 11 Coal bed has very high contents of veined quartz (Vol. 11.4%) and veined ankerite (Vol. 10.2 %). The veined ankerite was generally coated by goethite and the veined quartz embraced chalcopyrite, sphalerite, and selenio-galena. In addition, a trace amount of kaolinite was filled in the veins. These seven minerals often occur in the same veins. The formation temperatures of the veined ankerite and quartz are 85??C and 180??C respectively, indicating their origins of iron-rich calcic and siliceous low-temperature hydrothermal fluids in different epigenetic periods. Studies have also found that the veined quartz probably formed earlier than the veined ankerite, and at least three distinct ankerite formation stages were observed by the ration of Ca/Sr and Fe/Mn of ankerite. The mineral formation from the early to late stage is in order of sulfide, quartz, kaolinite, ankerite, and goethite. The veined ankerite is the dominant source of Mn, Cu, Ni, Pb, and Zn, which are as high as 0.09%, 74.0 ??g/g, 33.6 ??g/g, 185 ??g/g, and 289 ??g/g in this coal seam, respectively. However, the veined quartz is the main carrier of Pd, Pt, and Ir, which are 1.57 ??g/g, 0.15 ??g/g, and 0.007 ??g/g in this coal seam, respectively. In addition, chalcopyrite, sphalerite, and selenio-galena of hydrothermal origin were determined in the veined quartz, and these three sulfide minerals are also important carriers of Cu, Zn and Pb in the No. 11 Coal bed.

Acta Geologica Sinica↗
USGS2006

A discovery of extremely-enriched boehmite from coal in the Junger Coalfield, the northeastern Ordos Basin

The authors found an extremely-enriched boehmite and its associated minerals for the first time in the super-thick No. 6 coal seam from the Junger Coalfield in the northeastern Ordos Basin by using technologies including the X-ray diffraction analysis (XRD), scanning electron microscope equipped with an energy dispersive X-ray spectrometer, and optical microscope. The content of boehmite is as high as 13.1%, and the associated minerals are goyazite, zircon, rutile, goethite, galena, clausthalite, and selenio-galena. The heavy minerals assemblage is similar to that in the bauxite of the Benxi Formation from North China. The high boehmite in coal is mainly from weathering crust bauxite of the Benxi Formation from the northeastern coal-accumulation basin. The gibbsite colloidstone solution was removed from bauxite to the peat mire, and boehmite was formed via compaction and dehydration of gibbsite colloidstone solution in the period of peat accumulation and early period of diagenesis.

Acta Geologica Sinica↗
USGS2007

Bacteria form tellurium nanocrystals

A team of researchers have found two bacterial species that produce tellurium oxyanions as respiratory electron acceptors for growth, leaving elemental tellurium in the form of nanoparticles. The crystals from the two organisms exhibit distinctively different structures. Bacillus selenitireducens initially forms nanorods that cluster together to form rosettes. Sulfurospirillum barnesii forms irregularly-shaped nanospheres that coalesce into larger composite aggregates.

Industrial Bioprocessing↗