Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “The Earth Observer”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80Linked to original sources
USGS2021

Limited mantle hydration by bending faults at the Middle America Trench

Seismic anisotropy measurements show that upper mantle hydration at the Middle America Trench (MAT) is limited to serpentinization and/or water in fault zones, rather than distributed uniformly. Subduction of hydrated oceanic lithosphere recycles water back into the deep mantle, drives arc volcanism, and affects seismicity at subduction zones. Constraining the extent of upper mantle hydration is an important part of understanding many fundamental processes on Earth. Substantially reduced seismic velocities in tomography suggest that outer rise plate‐bending faults provide a pathway for seawater to rehydrate the slab mantle just prior to subduction. Estimates of outer‐rise hydration based on tomograms vary significantly, with some large enough to imply that, globally, subduction has consumed more than two oceans worth of water during the Phanerozoic. We found that, while the mean upper mantle wavespeed is reduced at the MAT outer rise, the amplitude and orientation of inherited anisotropy are preserved at depths >1 km below the Moho. At shallower depths, relict anisotropy is replaced by slowing in the fault‐normal direction. These observations are incompatible with pervasive hydration but consistent with models of wave propagation through serpentinized fault zones that thin to <100‐m in width at depths >1 km below Moho. Confining hydration to fault zones reduces water storage estimates for the MAT upper mantle from ∼3.5 wt% to <0.9 wt% H 2 0. Since the intermediate thermal structure in the ∼24 Myr‐old MAT slab favors serpentinization, limited hydration suggests that fault mechanics are the limiting factor, not temperatures. Subducting mantle may be similarly dry globally.

Journal of Geophysical Research↗
USGS2023

Quantification of geodetic strain rate uncertainties and implications for seismic hazard estimates

Geodetic velocity data provide first-order constraints on crustal surface strain rates, which in turn are linked to seismic hazard. Estimating the 2-D surface strain tensor everywhere requires knowledge of the surface velocity field everywhere, while geodetic data such as Global Navigation Satellite System (GNSS) only have spatially scattered measurements on the surface of the Earth. To use these data to estimate strain rates, some type of interpolation is required. In this study, we review methodologies for strain rate estimation and compare a suite of methods, including a new implementation based on the geostatistical method of kriging, to compare variation between methods with uncertainty based on one method. We estimate the velocity field and calculate strain rates in southern California using a GNSS velocity field and five different interpolation methods to understand the sources of variability in inferred strain rates. Uncertainty related to data noise and station spacing (aleatoric uncertainty) is minimal where station spacing is dense and maximum far from observations. Differences between methods, related to epistemic uncertainty, are usually highest in areas of high strain rate due to differences in how gradients in the velocity field are handled by different interpolation methods. Parameter choices, unsurprisingly, have a strong influence on strain rate field, and we propose the traditional L -curve approach as one method for quantifying the inherent trade-off between fit to the data and models that are reflective of tectonic strain rates. Doing so, we find total variability between five representative strain rate models to be roughly 40 per cent, a much lower value than roughly 100 per cent that was found in previous studies (Hearn et al .). Using multiple methods to tune parameters and calculate strain rates provides a better understanding of the range of acceptable models for a given velocity field. Finally, we present an open-source Python package (Materna et al .) for calculating strain rates, Strain_2D, which allows for the same data and model grid to be used in multiple strain rate methods, can be extended with other methods from the community, and provides an interface for comparing strain rate models, calculating statistics and estimating strain rate uncertainty for a given GNSS data set.

Geophysical Journal International↗
USGS2008

Monitoring the Earth's dynamic magnetic field

The mission of the U.S. Geological Survey's Geomagnetism Program is to monitor the Earth's magnetic field. Using ground-based observatories, the Program provides continuous records of magnetic field variations covering long timescales; disseminates magnetic data to various governmental, academic, and private institutions; and conducts research into the nature of geomagnetic variations for purposes of scientific understanding and hazard mitigation. The program is an integral part of the U.S. Government's National Space Weather Program (NSWP), which also includes programs in the National Aeronautics and Space Administration (NASA), the Department of Defense (DOD), the National Oceanic and Atmospheric Administration (NOAA), and the National Science Foundation (NSF). The NSWP works to provide timely, accurate, and reliable space weather warnings, observations, specifications, and forecasts, and its work is important for the U.S. economy and national security. Please visit the National Geomagnetism Program?s website, http://geomag.usgs.gov, where you can learn more about the Program and the science of geomagnetism. You can find additional related information at the Intermagnet website, http://www.intermagnet.org.

Fact Sheet↗
USGS2009

Thermodynamic model for uplift and deflation episodes (bradyseism) associated with magmatic-hydrothermal activity at the Campi Flegrei (Italy)

Campi Flegrei (CF) is a large volcanic complex located west of the city of Naples, Italy. Repeated episodes of bradyseism (slow vertical ground movement) near the town of Pozzuoli have been documented since Roman times. Bradyseismic events are interpreted as the consequence of aqueous fluid exsolution during magma solidification on a slow timescale (10 3 –10 4 yr) superimposed upon a shorter (1–10 yr) timescale for the episodic expulsion of fluid from a deep (~ 3–5 km) lithostatically-pressured low-permeability reservoir to an overlying hydrostatic reservoir. Cycles of inflation and deflation occur during short duration transient events when connectivity is established between deep and shallow hydrothermal reservoirs. The total seismic energy released (4 × 10 13 J) during the 1983–1984 bradyseismic crisis is consistent with the observed volume change (uplift) and consistent with the notion that seismic failure occurs in response to the shear stress release induced by volume change. Fluid transport and concomitant propagation of hydrofractures as fluid expands from lithostatic to hydrostatic pressure during decompression leads to ground surface displacement. Fluid decompression occurs along the fluid isenthalp (Joule–Thompson expansion) during transient periods of reservoir connectivity and leads to mineral precipitation. Each kilogram of fluid precipitates about 3 × 10 − 3 kg of silica along a typical decompression path along the isenthalp. Mineral precipitation modifies the permeability and acts to reseal connection paths thereby isolating lithostatic and hydrostatic reservoirs ending one bradyseism phase and beginning another. Crystallization and exsolution of the magmatic fluid generates ≈ 7 × 10 15 J of mechanical ( P Δ V ) energy, and this is sufficient to accomplish the observed uplift at CF. Although magma emplacement is the ultimate origin of bradyseism, fresh recharge of magma is not a prerequisite. Instead, short to intermediate timescale phenomena associated with fluid decompression and expansion in the crust with large variations in permeability, including permeability anisotropy, are the key elements at CF.

Naples↗
USGS2003

Importance of a stochastic distribution of floods and erosion thresholds in the bedrock river incision problem

Fluvial erosion of bedrock occurs during occasional flood events when boundary shear stress exceeds a critical threshold to initiate incision. Therefore efforts to model the evolution of topography over long timescales should include an erosion threshold and should be driven by a stochastic distribution of erosive events. However, most bedrock incision models ignore the threshold as a second‐order detail. In addition, climate is poorly represented in most landscape evolution models, so the quantitative relationship between erosion rate and measurable climatic variables has been elusive. Here we show that the presence of an erosion threshold, when combined with a well‐constrained, probabilistic model of storm and flood occurrence, has first‐order implications for the dynamics of river incision in tectonically active areas. First, we make a direct calculation of the critical shear stress required to pluck bedrock blocks for a field site in New York. Second, we apply a recently proposed stochastic, threshold, bedrock incision model to a series of streams in California, with known tectonic and climatic forcing. Previous work in the area has identified a weak relationship between channel gradient or relief and rock uplift rate that is not easily explained by simpler detachment‐limited models. The results with the stochastic threshold model show that even low erosion thresholds, which are exceeded in steep channels during high‐frequency flood events, fundamentally affect the predicted relationship between gradient and uplift rate in steady state rivers, in a manner consistent with the observed topography. This correspondence between theory and data is, however, nonunique; models in which a thin alluvial cover may act to inhibit channel incision in the low uplift rate zone also provide plausible explanations for the observed topography. Third, we explore the broader implications of the stochastic threshold model to the development of fluvial topography in active tectonic settings. We suggest that continued field applications of geomorphic models, including physically meaningful thresholds and stochastic climate distributions, are required to advance our knowledge of interactions among surficial, climatic, and crustal processes.

California↗
USGS2024

Repeated coseismic uplift of coastal lagoons above the Patton Bay Splay Fault System, Montague Island, Alaska, USA

Coseismic slip on the Patton Bay splay fault system during the 1964 M w 9.2 Great Alaska Earthquake contributed to local tsunami generation and vertically uplifted shorelines as much as 11 m on Montague Island in Prince William Sound (PWS). Sudden uplift of 3.7–4.3 m caused coastal lagoons along the island's northwestern coast to gradually drain. The resulting change in depositional environment from marine lagoon to freshwater muskeg created a sharp, laterally continuous stratigraphic contact between silt and overlying peat. Here, we characterize the geomorphology, sedimentology, and diatom ecology across the 1964 earthquake contact and three similar prehistoric contacts within the stratigraphy of the Hidden Lagoons locality. We find that the contacts signal instances of abrupt coastal uplift that, within error, overlap the timing of independently constrained megathrust earthquakes in PWS—1964 Common Era, 760–870 yr BP, 2500–2700 yr BP, and 4120–4500 yr BP. Changes in fossil diatom assemblages across the inferred prehistoric earthquake contacts reflect ecological shifts consistent with repeated draining of a lagoon system caused by >3 m of coseismic uplift. Our observations provide evidence for four instances of combined megathrust-splay fault ruptures that have occurred in the past ∼4,200 years in PWS. The possibility that 1964-style combined megathrust-splay fault ruptures may have repeated in the past warrants their consideration in future seismic and tsunami hazards assessments.

Alaska↗
USGS2026

Understanding the resource potential of natural hydrogen on Earth: Scientific gaps, uncertainties and recommendations

A comprehensive scientific research roadmap is essential to bridge knowledge gaps and deepen the understanding of key geological, geochemical, and geophysical aspects of natural hydrogen (H 2 ) as a potential new energy resource. This paper reviews major scientific uncertainties on natural H 2 , suggesting research priorities, as a guide for defining exploration strategies, techniques, and data interpretation. The uncertainties concern all phases of the natural H 2 cycle, from generation (source rocks) through migration (advection and diffusion) and accumulation (reservoir and cap rocks) to the application and interpretation of subsurface and surface geochemical and geophysical exploration techniques. Understanding H 2 sources and generation rates (the amount of H 2 generated by a given volume of rock over time) is crucial for determining whether a geological H 2 system operates as a short-term dynamic system with rapid H 2 production and release, or as a conventional gas system with long-term accumulations, analogous to petroleum reservoirs. Preliminary estimates for serpentinisation, radiolysis, and organic matter degradation suggest that H 2 generation is not inherently fast, especially for non-hydrothermal continental systems (crystalline basement of shields, ophiolites, peridotite massifs, sedimentary basins), and long-term accumulations, like those of fossil natural gas systems, represent the most likely scenario. The mechanisms of H 2 migration through geological formations require application of fundamental principles of fluid-flow physics, distinguishing advection and diffusion, as well as their forms (from gas-phase, bubble flows to aqueous solutions). Additional studies of H 2 accumulation and retention in subsurface reservoirs could improve understanding of mechanisms of H 2 migration by focusing on the rock fluid-bearing properties and the factors affecting H 2 preservation, such as the presence of cap rocks impermeable to H 2 , pressure conditions, residence times, and microbial or abiotic consumption. Advanced techniques, including reservoir modelling, flow simulations, 3D imaging (micro-CT) of H 2 -bearing rocks, and extraction and analysis of gas occluded in rocks, can provide insights into the stability and potential recoverability of H 2 accumulations. The interpretation of surface exploration techniques, including gas geochemistry, geophysics, and remote sensing, long employed in mineral and energy resource exploration, is now being adapted for natural H 2 studies, but challenges remain in the data interpretation. Distinguishing H 2 seepage due to geological degassing from H 2 produced near the surface by modern microbial processes or artificial sources, such as hammering or drilling for soil-gas sampling, drilling into aquifers, and corrosion in boreholes, is an essential step in exploration. The simple detection of H 2 in soils, even in morphological structures like sub-circular depressions or “fairy circles”, cannot be cursorily interpreted as a signal of natural H 2 seepage from a deep source. A holistic geochemical approach, including isotopic analyses of gases associated with H 2 , is recommended to distinguish among the variety of possible H 2 origins. Observations of H 2 in wells should be interrogated to rule out possible artifacts such as corrosion and drill bit metamorphism. The integration of multiple geophysical methods, including seismic, gravimetric, magnetic, and electro-magnetic surveys, is recommended to mitigate interpretation ambiguities regarding the structure of a subsurface H 2 system (source and reservoir rocks, including fluid and gas storage), due to the non-uniqueness of rock-specific physical properties.

Earth-Science Reviews↗
USGS2016

Induced earthquake magnitudes are as large as (statistically) expected

A major question for the hazard posed by injection-induced seismicity is how large induced earthquakes can be. Are their maximum magnitudes determined by injection parameters or by tectonics? Deterministic limits on induced earthquake magnitudes have been proposed based on the size of the reservoir or the volume of fluid injected. However, if induced earthquakes occur on tectonic faults oriented favorably with respect to the tectonic stress field, then they may be limited only by the regional tectonics and connectivity of the fault network. In this study, we show that the largest magnitudes observed at fluid injection sites are consistent with the sampling statistics of the Gutenberg-Richter distribution for tectonic earthquakes, assuming no upper magnitude bound. The data pass three specific tests: (1) the largest observed earthquake at each site scales with the log of the total number of induced earthquakes, (2) the order of occurrence of the largest event is random within the induced sequence, and (3) the injected volume controls the total number of earthquakes rather than the total seismic moment. All three tests point to an injection control on earthquake nucleation but a tectonic control on earthquake magnitude. Given that the largest observed earthquakes are exactly as large as expected from the sampling statistics, we should not conclude that these are the largest earthquakes possible. Instead, the results imply that induced earthquake magnitudes should be treated with the same maximum magnitude bound that is currently used to treat seismic hazard from tectonic earthquakes.

Journal of Geophysical Research B: Solid Earth↗
USGS2017

Durable terrestrial bedrock predicts submarine canyon formation

Though submarine canyons are first-order topographic features of Earth, the processes responsible for their occurrence remain poorly understood. Potentially analogous studies of terrestrial rivers show that the flux and caliber of transported bedload are significant controls on bedrock incision. Here we hypothesize that coarse sediment load could exert a similar role in the formation of submarine canyons. We conducted a comprehensive empirical analysis of canyon occurrence along the West Coast of the contiguous United States which indicates that submarine canyon occurrence is best predicted by the occurrence of durable crystalline bedrock in adjacent terrestrial catchments. Canyon occurrence is also predicted by the flux of bed sediment to shore from terrestrial streams. Surprisingly, no significant correlation was observed between canyon occurrence and the slope or width of the continental shelf. These findings suggest that canyon incision is promoted by greater yields of durable terrestrial clasts to the shore.

Geophysical Research Letters↗
USGS2017

Effects of lateral confinement in natural and leveed reaches of a gravel-bed river: Snake River, Wyoming, USA

This study examined the effects of natural and anthropogenic changes in confining margin width by applying remote sensing techniques – fusing LiDAR topography with image-derived bathymetry – over a large spatial extent: 58 km of the Snake River, Wyoming, USA. Fused digital elevation models from 2007 and 2012 were differenced to quantify changes in the volume of stored sediment, develop morphological sediment budgets, and infer spatial gradients in bed material transport. Our study spanned two similar reaches that were subject to different controls on confining margin width: natural terraces versus artificial levees. Channel planform in reaches with similar slope and confining margin width differed depending on whether the margins were natural or anthropogenic. The effects of tributaries also differed between the two reaches. Generally, the natural reach featured greater confining margin widths and was depositional, whereas artificial lateral constriction in the leveed reach produced a sediment budget that was closer to balanced. Although our remote sensing methods provided topographic data over a large area, net volumetric changes were not statistically significant due to the uncertainty associated with bed elevation estimates. We therefore focused on along-channel spatial differences in bed material transport rather than absolute volumes of sediment. To complement indirect estimates of sediment transport derived by morphological sediment budgeting, we collected field data on bed mobility through a tracer study. Surface and subsurface grain size measurements were combined with bed mobility observations to calculate armoring and dimensionless sediment transport ratios, which indicated that sediment supply exceeded transport capacity in the natural reach and vice versa in the leveed reach. We hypothesize that constriction by levees induced an initial phase of incision and bed armoring. Because levees prevented bank erosion, the channel excavated sediment by migrating rapidly across the restricted braidplain and eroding bars and islands.

Wyoming↗
USGS1976

Thermomagnetic analysis of meteorites, 3. C3 and C4 chondrites

Thermomagnetic analysis was made on samples of all known C3 and C4 chondrites in a controlled oxygen atmosphere. Considerable variation was noted in the occurrence of magnetic minerals, comparable to the variation observed earlier in the C2 chondrites. Magnetite was found as the only major magnetic phase in samples of only three C3 chondrites (2–4 wt.%) and the Karoonda C4 chondrite (7.7 wt.%). The magnetite content of these three C3 chondrites is only about one-third that observed in the C1 and C2 chondrites which were found to contain magnetite as the only magnetic phase. Five C3 chondrites were observed to undergo chemical change during heating, producing magnetite: this behavior is characteristic of troilite oxidation. Upper limits on initial magnetite content of about 1–9% were established for these meteorites. Samples of the remaining five C3 chondrites and the Coolidge C4 chondrite were found to contain both magnetite and metallic iron. In two samples, iron containing ≤2% Ni was observed, while in the other four, the iron contained 6–8 wt.% Ni. In addition to containing both magnetite and iron metal, three of these samples reacted during heating to form additional magnetite. Variations in the magnetic mineralogy and, hence by inference bulk mineralogy, of C3 and C4 chondrites indicate a more complex genesis than is evident from whole-rock elemental abundance patterns.

Earth and Planetary Science Letters↗
USGS2021

The birth of a Hawaiian fissure eruption

Most basaltic explosive eruptions intensify abruptly, allowing little time to document processes at the start of eruption. One opportunity came with the initiation of activity from fissure 8 (F8) during the 2018 eruption on the lower East Rift Zone of Kīlauea, Hawaii. F8 erupted in four episodes. We recorded 28 min of high‐definition video during a 51‐min period, capturing the onset of the second episode on 5 May. From the videos, we were able to analyze the following in‐flight parameters: frequency and duration of explosions; ejecta heights; pyroclast exit velocities; in‐flight total mass and estimated mass eruption rates; and the in‐flight total grain size distributions. The videos record a transition from initial pulsating outgassing, via spaced, but increasingly rapid, discrete explosions, to quasisustained, unsteady fountaining. This transition accompanied waxing intensity (mass flux) of the F8 eruption. We infer that all activity was driven by a combination of the ascent of a coupled mixture of small bubbles and melt, and the buoyant rise of decoupled gas slugs and/or pockets. The balance between these two types of concurrent flow determined the exact form of the eruptive activity at any point in time, and changes to their relative contributions drove the transition we observed at early F8. Qualitative observations of other Hawaiian fountains at Kīlauea suggest that this physical model may apply more generally. This study demonstrates the value of in‐flight parameters derived from high‐resolution videos, which offer a rapid and highly time‐sensitive alternative to measurements based on sampling of deposits posteruption.

Island of Hawai'i↗
USGS2022

Predicted sea-level rise-driven biogeomorphological changes on Fire Island, New York: Implications for people and plovers

Forecasting biogeomorphological conditions for barrier islands is critical for informing sea-level rise (SLR) planning, including management of coastal development and ecosystems. We combined five probabilistic models to predict SLR-driven changes and their implications on Fire Island, New York, by 2050. We predicted barrier island biogeomorphological conditions, dynamic landcover response, piping plover ( Charadrius melodus ) habitat availability, and probability of storm overwash under three scenarios of shoreline change (SLC) and compared results to observed 2014/2015 conditions. Scenarios assumed increasing rates of mean SLC from 0 to 4.71 m erosion per year. We observed uncertainty in several morphological predictions (e.g., beach width, dune height), suggesting decreasing confidence that Fire Island will evolve in response to SLR as it has in the past. Where most likely conditions could be determined, models predicted that Fire Island would become flatter, narrower, and more overwash-prone with increasing rates of SLC. Beach ecosystems were predicted to respond dynamically to SLR and migrate with the shoreline, while marshes lost the most area of any landcover type compared to 2014/2015 conditions. Such morphological changes may lead to increased flooding or breaching with coastal storms. However—although modest declines in piping plover habitat were observed with SLC—the dynamic response of beaches, flatter topography, and increased likelihood of overwash suggest storms could promote suitable conditions for nesting piping plovers above what our geomorphology models predict. Therefore, Fire Island may offer a conservation opportunity for coastal species that rely on early successional beach environments if natural overwash processes are encouraged.

New York↗
USGS2012

Application of continuum models to deformation of the Aleutian Island Arc

Continuum models were constructed to describe large‐scale deformation of the Aleutian Island Arc over the past 5 m.y. These models consider the island arc as a continuum in the horizontal plane with the velocity boundary condition at the Pacific edge stated as a fraction of Pacific plate convergence transferred to the arc. First, a simple model of uniformly distributed strain is formulated to illustrate the mechanics of continuous deformation. Lineaments along the arc massif rotated about a vertical axis are matched by small‐element rotation calculated from the model. However, this model does not predict across‐arc variations in deformation and produces an unrealistic amount of crustal thickening after 5 m.y. A physically more meaningful model of deformation is the thin viscous sheet model based on averages of stress and rheology throughout the lithosphere. The amount of motion transferred from the Pacific plate to the arc is constrained by the rotated lineaments, while the effective stress‐strain exponent ( n ) and the ability the lithosphere has to sustain crustal thickness contrasts (the Argand number) are independent variables. Primarily, bathymetry, earthquake focal mechanisms, and styles of faulting are used to evaluate the models. The preferred model is one where the amount of motion transferred from the Pacific plate is greater in an arc‐parallel direction than in an arc‐normal direction, producing stresses consistent with strike‐slip faulting at the far western end of the arc and tensional stresses consistent with transverse normal faulting elsewhere in the arc massif. This model agrees with observations of slip vectors by Ekström and Engdahl (1989), who conclude that a portion of the arc‐parallel component of relative plate motion is taken up in the overriding plate. This model implies that compressive stress transferred to the arc is small in comparison to along‐arc shear stress and that stresses conducive to strikeslip faulting are prevalent throughout the arc.

Alaska↗
USGS2015

Evapotranspiration trends over the eastern United States during the 20th century

Most models evaluated by the Intergovernmental Panel for Climate change estimate projected increases in temperature and precipitation with rising atmospheric CO 2 levels. Researchers have suggested that increases in CO 2 and associated increases in temperature and precipitation may stimulate vegetation growth and increase evapotranspiration (ET), which acts as a cooling mechanism, and on a global scale, may slow the climate-warming trend. This hypothesis has been modeled under increased CO 2 conditions with models of different vegetation-climate dynamics. The significance of this vegetation negative feedback, however, has varied between models. Here we conduct a century-scale observational analysis of the Eastern US water balance to determine historical evapotranspiration trends and whether vegetation greening has affected these trends. We show that precipitation has increased significantly over the twentieth century while runoff has not. We also show that ET has increased and vegetation growth is partially responsible.

Hydrology and Earth System Sciences↗
USGS2013

The stability of sulfate and hydrated sulfate minerals near ambient conditions and their significance in environmental and planetary sciences

Sulfate and hydrated sulfate minerals are abundant and ubiquitous on the surface of the Earth and also on other planets and their satellites. The humidity-buffer technique has been applied to study the stability of some of these minerals at 0.1 MPa in terms of temperature-relative humidity space on the basis of hydration-dehydration reversal experiments. Updated phase relations in the binary system MgSO 4 -H 2 O are presented, as an example, to show how reliable thermodynamic data for these minerals could be obtained based on these experimental results and thermodynamic principles. This approach has been applied to sulfate and hydrated sulfate minerals of other metals, including Fe (both ferrous and ferric), Zn, Ni, Co, Cd, and Cu. Metal-sulfate salts play important roles in the cycling of metals and sulfate in terrestrial systems, and the number of phases extends well beyond the simple sulfate salts that have thus far been investigated experimentally. The oxidation of sulfide minerals, particularly pyrite, is a common process that initiates the formation of efflorescent metal-sulfate minerals. Also, the overall abundance of iron-bearing sulfate salts in nature reflects the fact that the weathering of pyrite or pyrrhotite is the ultimate source for many of these phases. Many aspects of their environmental significance are reviewed, particularly in acute effects to aquatic ecosystems related to the dissolution of sulfate salts during rain storms or snow-melt events. Hydrous Mg, Ca, and Fe sulfates were identified on Mars, with wide distribution and very large quantities at many locations, on the basis of spectroscopic observations from orbital remote sensing and surface explorations by rovers. However, many of these findings do not reveal the detailed information on the degree of hydration that is essential for rigorous interpretation of the hydrologic history of Mars. Laboratory experiments on stability fields, reactions pathways, and reaction rates of hydrous sulfates likely to be found on Mars enhance our understanding of the degrees of hydration of various sulfates that should currently exist on Mars at various seasons and locations and during various atmospheric pressure and obliquity periods. Two sets of systematic experiments were described; one on hydrous Mg sulfates and the other on hydrous Fe 3+ sulfates. Also, their implications to Mars sulfates mineralogy were discussed.

Journal of Asian Earth Sciences↗
USGS2009

Earth's magnetic field complex: U.S. National activities during the Decade of Geopotential Field Research

The US geomagnetism community is supported by NASA, NOAA, USGS, NSF, DOD, and US universities. During the Decade of Geopotential Field Research, inaugurated in 1999 with the launch of the Danish satellite Ørsted on a US rocket, the US community has been involved in satellite mission development and analysis, instrument development, model development, and in the discovery and understanding of new processes with satellite magnetic signatures. The ESA Swarm mission has been a primary focus of the US community, with three US scientists on Swarm's Mission Advisory Group. Swarm will measure, for the first time, the E-W gradient of the magnetic field. One of us (T. Sabaka) is involved with the development of a Comprehensive inversion scheme as part of the SMART consortium. This effort is an outgrowth of the Comprehensive Model [1]. Swarm will also provide valuable observations for ionospheric specification and forecast. The geomagnetism group at NOAA (S. Maus, P. Alken and C. Manoj) has developed algorithms to estimate the strength of the eastward electric field (EEF). As the driver of the equatorial plasma fountain, the EEF is an important space weather parameter. ESA is considering the implementation of the EEF as a dedicated inversion chain in the Level-2 Facility. In 2006, NASA launched a minisatellite magnetometer constellation mission (ST-5) to test technologies and software. The ST-5 constellation featured the first along-track gradient measurements. NASA has also initiated efforts to study geomagnetism mission concepts after Swarm. One of the ideas under consideration is the systematic measurement of radial field gradients. Instrument development, and geomagnetic observatories, are also an integral part of the US effort. The past decade has seen significant advances in the development of a self-calibrating vector helium magnetometer, and in the automation of the US observatory network. Working in coordination with Intermagnet, the USGS Geomagnetism Program has made operational 1-second data acquisition at 13 of its magnetic observatories. The Program is also developing a realtime 1-minute and 1-hour Dst service. Within the past decade, US scientists have been leaders in the development of models that describe the global geomagnetic environment, including comprehensive models (the CM series), maps of the lithospheric field from satellite (MF-series), near surface maps of the lithospheric field (WDMAM-series), models of the thickness of the magnetic crust, the IGRF and World Magnetic Model series, ionospheric models such as the EEJM1, JVDM1, and the IRI, and data assimilation-based models (MoSST-series) that predict the future state of the geomagneic field.

Conference Paper↗
USGS2018

An updated method for estimating landslide‐event magnitude

Summary statistics derived from the frequency–area distribution (FAD) of inventories of triggered landslides allows for direct comparison of landslides triggered by one event (e.g. earthquake, rainstorm) with another. Such comparisons are vital to understand links between the landslide‐event and the environmental characteristics of the area affected. This could lead to methods for rapid estimation of landslide‐event magnitude, which in turn could lead to estimates of the total triggered landslide area. Previous studies proposed that the FAD of landslides follows an inverse power‐law, which provides the basis to model the size distribution of landslides and to estimate landslide‐event magnitude ( mLS ), which quantifies the severity of the event. In this study, we use a much larger collection of earthquake‐induced landslide (EQIL) inventories ( n =45) than previous studies to show that size distributions are much more variable than previously assumed. We present an updated model and propose a method for estimating mLS and its uncertainty that better fits the observations and is more reproducible, robust, and consistent than existing methods. We validate our model by computing mLS for all of the inventories in our dataset and comparing that with the total landslide areas of the inventories. We show that our method is able to estimate the total landslide area of the events in this larger inventory dataset more successfully than the existing methods.

Earth Surface Processes and Landforms↗