Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80Linked to original sources

Temporal evolution of continental lithospheric strength in actively deforming regions

It has been agreed for nearly a century that a strong, load-bearing outer layer of earth is required to support mountain ranges, transmit stresses to deform active regions and store elastic strain to generate earthquakes. However the dept and extent of this strong layer remain controversial. Here we use a variety of observations to infer the distribution of lithospheric strength in the active western United States from seismic to steady-state time scales. We use evidence from post-seismic transient and earthquake cycle deformation reservoir loading glacio-isostatic adjustment, and lithosphere isostatic adjustment to large surface and subsurface loads. The nearly perfectly elastic behavior of Earth's crust and mantle at the time scale of seismic wave propagation evolves to that of a strong, elastic crust and weak, ductile upper mantle lithosphere at both earthquake cycle (EC, ???10?? to 103 yr) and glacio-isostatic adjustment (GIA, ???103 to 104 yr) time scales. Topography and gravity field correlations indicate that lithosphere isostatic adjustment (LIA) on ???106-107 yr time scales occurs with most lithospheric stress supported by an upper crust overlying a much weaker ductile subtrate. These comparisons suggest that the upper mantle lithosphere is weaker than the crust at all time scales longer than seismic. In contrast, the lower crust has a chameleon-like behavior, strong at EC and GIA time scales and weak for LIA and steady-state deformation processes. The lower crust might even take on a third identity in regions of rapid crustal extension or continental collision, where anomalously high temperatures may lead to large-scale ductile flow in a lower crustal layer that is locally weaker than the upper mantle. Modeling of lithospheric processes in active regions thus cannot use a one-size-fits-all prescription of rheological layering (relation between applied stress and deformation as a function of depth) but must be tailored to the time scale and tectonic setting of the process being investigated.

GSA Today↗

The Great Acceleration and the disappearing surficial geologic record

The surficial geologic record is the relatively thin veneer of young (<~1 Ma) and mostly unconsolidated sediments that cover portions of Earth’s terrestrial surface (Fig. 1). Once largely ignored as “overburden” by geologists, surficial deposits are now studied to address a wide range of issues related to the sustainability of human societies. Geologists use surficial deposits to determine the frequency and severity of past climatic changes, quantify natural and anthropogenic erosion rates, identify hazards, and calculate recurrence intervals associated with earthquakes, landslides, tsunamis, and volcanic eruptions. Increasingly, however, humans are eradicating the surficial geologic record in many key areas through progressive modification of Earth’s surface.

GSA Today↗

Chemical compositions of rock types as factors in our environment

The types of rocks that form geologic units in the Earth’s crust supply most of the raw materials from which soils are formed and from which water derives its inorganic constituents. The compositions of what we eat and drink thus depend in part upon the compositions of the source rocks. Igneous rocks are formed by crystallization and solidification of a rock melt. Metamorphic rocks are formed by recrystallization of both igneous and sedimentary rocks caused by heat and pressure within the Earth’s crust. Sedimentary rocks are formed chiefly by the deposition in water of weathering and erosion products of pre-existing igneous, metamorphic, or other sedimentary rocks. The compositions of metamorphic rocks are generally similar to the compositions of the rocks that were metamorphosed, and only igneous and sedimentary rock compositions are considered here. Igneous rocks range in SiO 2 content from about 40 to nearly 80 percent, and other constituents increase in amount as SiO 2 decreases. The changes in the other constituents are not large, however, except for the quantitatively unimportant least silicic rocks; these contain conspicuously more magnesium and less aluminum than the other kinds of igneous rocks. Sedimentary rocks range in SiO 2 content from nearly zero for the carbonate rocks to almost 100 percent for quartzite and pure sandstone. Shale and clay contain intermediate amounts of SiO 2 and as much as 25 percent AI 2 O 3 , more than any of the igneous rocks. Carbonate rocks are composed mostly of calcium and magnesium carbonates. The contents of individual trace elements vary widely with rock type. Chromium, titanium, nickel, and cobalt are conspicuously concentrated in low-silica igneous rocks that are quantitatively unimportant. Arsenic, iodine, molybdenum, and selenium are conspicuously concentrated in shale and clay. In addition, most other elements occur in largest amounts in shale and clay compared to other sedimentary rocks, and in amounts nearly equal to those in igneous rocks. Soils derived from different kinds of igneous rocks do not differ from each other as much as do soils derived from different kinds of sedimentary rocks. This is partly because igneous rocks generally are more resistant to weathering than sedimentary rocks that were deposited in water. Some of the important constituents of sedimentary rocks have been precipitated from solution, which makes them more susceptible to weathering and re-solution. Similarly, sedimentary rocks have a greater effect than igneous rocks on the composition of ground water. Determination of areal variations in composition should be more detailed than normal petrologic investigations if the results are to be usable for environmental studies. Statistical principles should be used in planning the sampling, analysis, and interpretation of results.

Book chapter↗

Chapter 5: Petrology and geochemistry of the metaluminous to peraluminous Chemehuevi Mountains Plutonic Suite, southeastern California

Structural relief resulting from middle Tertiary extensional deformation in the Chemehuevi Mountains exposes a unique cross section through a temporally and compositionally zoned (both vertically and horizontally), laccolith-shaped intrusion of Late Cretaceous age. The calc-alkalic, metaluminous to peraluminous Chemehuevi Mountains Plutonic Suite exhibits crude normal, vertical, and temporal zonation. The zones are progressively younger and more felsic away from the roof and walls; the most differentiated material is concentrated toward the center and floor of the intrusion. Hornblende-biotite- and biotite granodiorite are metaluminous and form the outer margin of the intrusion along the northern and southern walls, and sill-like bodies in an older suite of granitoids and Proterozoic basement rocks. Locally these rocks bear a sub-horizontal, southwest-trending, mylonitic lineation, considered to be synchronous with regional mylonitic deformation. Later and more evolved units are subequigranular to porphyritic, metaluminous to weakly peraluminous biotite granodiorite to granite, and make up the greatest proportion of the intrusion. The youngest, most leucocratic members of the suite are undeformed, locally garnetiferous muscovite granite and granodiorite that form the central part of the intrusion. Major, trace, and rare earth element data indicate that the magmas of the Cheme-huevi Mountains Plutonic Suite became progressively enriched in Si, K, Rb, Mn, Y, U, and heavy rare earth elements (REE). Fractional crystallization of some REE–rich accessory minerals was important in producing some of these trends. Although modest compositional breaks occur across internal contacts, the general continuity of trends from field, modal, and chemical data suggests that these rocks constitute a comagmatic intrusive suite. Estimates for the pressure of emplacement of the suite vary from 4 to 6 kbar, or a minimum depth of 12 km. Preliminary Pb-, Sr-, and oxygen-isotopic data, together with the REE chemistry, suggest that the Chemehuevi Mountains Plutonic Suite was derived from a heterogeneous crustal source. Compositional variations within the plutonic suite are consistent with open-system fractionation, involving fractional crystallization of discrete batches of magma derived from the melting of a heterogeneous crustal source under H 2 O-saturated conditions.

California↗

Arc-continent collision and the formation of continental crust: A new geochemical and isotopic record from the Ordovician Tyrone Igneous Complex, Ireland

Collisions between oceanic island-arc terranes and passive continental margins are thought to have been important in the formation of continental crust throughout much of Earth's history. Magmatic evolution during this stage of the plate-tectonic cycle is evident in several areas of the Ordovician Grampian-Taconic orogen, as we demonstrate in the first detailed geochemical study of the Tyrone Igneous Complex, Ireland. New U-Pb zircon dating yields ages of 493 2 Ma from a primitive mafic intrusion, indicating intra-oceanic subduction in Tremadoc time, and 475 10 Ma from a light rare earth element (LREE)-enriched tonalite intrusion that incorporated Laurentian continental material by early Arenig time (Early Ordovician, Stage 2) during arc-continent collision. Notably, LREE enrichment in volcanism and silicic intrusions of the Tyrone Igneous Complex exceeds that of average Dalradian (Laurentian) continental material that would have been thrust under the colliding forearc and potentially recycled into arc magmatism. This implies that crystal fractionation, in addition to magmatic mixing and assimilation, was important to the formation of new crust in the Grampian-Taconic orogeny. Because similar super-enrichment of orogenic melts occurred elsewhere in the Caledonides in the British Isles and Newfoundland, the addition of new, highly enriched melt to this accreted arc terrane was apparently widespread spatially and temporally. Such super-enrichment of magmatism, especially if accompanied by loss of corresponding lower crustal residues, supports the theory that arc-continent collision plays an important role in altering bulk crustal composition toward typical values for ancient continental crust. ?? 2009 Geological Society of London.

Journal of the Geological Society↗

The dynamical core, physical parameterizations, and basic simulation characteristics of the atmospheric component AM3 of the GFDL global coupled model CM3

The Geophysical Fluid Dynamics Laboratory (GFDL) has developed a coupled general circulation model (CM3) for the atmosphere, oceans, land, and sea ice. The goal of CM3 is to address emerging issues in climate change, including aerosol–cloud interactions, chemistry–climate interactions, and coupling between the troposphere and stratosphere. The model is also designed to serve as the physical system component of earth system models and models for decadal prediction in the near-term future—for example, through improved simulations in tropical land precipitation relative to earlier-generation GFDL models. This paper describes the dynamical core, physical parameterizations, and basic simulation characteristics of the atmospheric component (AM3) of this model. Relative to GFDL AM2, AM3 includes new treatments of deep and shallow cumulus convection, cloud droplet activation by aerosols, subgrid variability of stratiform vertical velocities for droplet activation, and atmospheric chemistry driven by emissions with advective, convective, and turbulent transport. AM3 employs a cubed-sphere implementation of a finite-volume dynamical core and is coupled to LM3, a new land model with ecosystem dynamics and hydrology. Its horizontal resolution is approximately 200 km, and its vertical resolution ranges approximately from 70 m near the earth’s surface to 1 to 1.5 km near the tropopause and 3 to 4 km in much of the stratosphere. Most basic circulation features in AM3 are simulated as realistically, or more so, as in AM2. In particular, dry biases have been reduced over South America. In coupled mode, the simulation of Arctic sea ice concentration has improved. AM3 aerosol optical depths, scattering properties, and surface clear-sky downward shortwave radiation are more realistic than in AM2. The simulation of marine stratocumulus decks remains problematic, as in AM2. The most intense 0.2% of precipitation rates occur less frequently in AM3 than observed. The last two decades of the twentieth century warm in CM3 by 0.32°C relative to 1881–1920. The Climate Research Unit (CRU) and Goddard Institute for Space Studies analyses of observations show warming of 0.56° and 0.52°C, respectively, over this period. CM3 includes anthropogenic cooling by aerosol–cloud interactions, and its warming by the late twentieth century is somewhat less realistic than in CM2.1, which warmed 0.66°C but did not include aerosol–cloud interactions. The improved simulation of the direct aerosol effect (apparent in surface clear-sky downward radiation) in CM3 evidently acts in concert with its simulation of cloud–aerosol interactions to limit greenhouse gas warming.

Journal of Climate↗

Projected future changes in vegetation in western North America in the 21st century

Rapid and broad-scale forest mortality associated with recent droughts, rising temperature, and insect outbreaks has been observed over western North America (NA). Climate models project additional future warming and increasing drought and water stress for this region. To assess future potential changes in vegetation distributions in western NA, the Community Earth System Model (CESM) coupled with its Dynamic Global Vegetation Model (DGVM) was used under the future A2 emissions scenario. To better span uncertainties in future climate, eight sea surface temperature (SST) projections provided by phase 3 of the Coupled Model Intercomparison Project (CMIP3) were employed as boundary conditions. There is a broad consensus among the simulations, despite differences in the simulated climate trajectories across the ensemble, that about half of the needleleaf evergreen tree coverage (from 24% to 11%) will disappear, coincident with a 14% (from 11% to 25%) increase in shrubs and grasses by the end of the twenty-first century in western NA, with most of the change occurring over the latter half of the twenty-first century. The net impact is a ~6 GtC or about 50% decrease in projected ecosystem carbon storage in this region. The findings suggest a potential for a widespread shift from tree-dominated landscapes to shrub and grass-dominated landscapes in western NA because of future warming and consequent increases in water deficits. These results highlight the need for improved process-based understanding of vegetation dynamics, particularly including mortality and the subsequent incorporation of these mechanisms into earth system models to better quantify the vulnerability of western NA forests under climate change.

Journal of Climate↗

The abiotic background as a central component of a Sample Safety Assessment Protocol for Mars Sample Return

Martian rock and regolith samples are being collected and cached by NASA’s Perseverance rover, with the goal of returning them to Earth as soon as the mid-2030s. Upon return, samples would be housed in a sample receiving facility under biological containment to prevent exposing Earth’s biosphere to any potential biohazards that might be present. Samples could be released from high containment for scientific investigations if they are found to be safe or are sterilized. The Sample Safety Assessment Protocol Tiger Team (SSAP-TT) was convened by the Sample Receiving Project between August 2023 and August 2024 and tasked with the development of a Sample Safety Assessment Protocol (SSAP). The result of this work is a proposed three-step protocol, supported by Bayesian statistical hypothesis testing, to assess the risk as to whether returned samples contain modern martian biology that could represent a biohazard. The proposed protocol outlines procedures to determine whether the samples could be safely released from high containment without sterilization or require a “hold and review” step. This article presents the central concept of the SSAP approach—comparing returned samples to the abiotic baseline. Organic molecules, which exist throughout the solar system, can have either biotic or abiotic origins. However, biotically produced organic molecules exhibit distinct complexity, distribution, and abundance characteristics that differentiate them from those formed through abiotic chemistry. The proposed protocol would examine the organic inventory of returned samples by using multiple techniques, including morphological and spectral assessments, to determine whether any signals exceed the abiotic baseline; that is, whether the organic molecular inventory could be explained solely by abiotic chemical synthesis. This approach provides a rigorous, yet feasible, safety assessment protocol by using modern techniques while minimizing sample consumption. We also identify key areas for future research and development, which include detection limits and further characterization of the martian abiotic background.

Astrobiology↗

Towards coordinated regional multi-satellite InSAR volcano observations: Results from the Latin America pilot project

Within Latin America, about 319 volcanoes have been active in the Holocene, but 202 of these volcanoes have no seismic, deformation or gas monitoring. Following the 2012 Santorini Report on satellite Earth Observation and Geohazards, the Committee on Earth Observation Satellites (CEOS) developed a 4-year pilot project (2013-2017) to demonstrate how satellite observations can be used to monitor large numbers of volcanoes cost-effectively, particularly in areas with scarce instrumentation and/or difficult access. The pilot aims to improve disaster risk management (DRM) by working directly with the volcano observatories that are governmentally responsible for volcano monitoring as well as with the international space agencies (ESA, CSA, ASI, DLR, JAXA, NASA, CNES). The goal is to make sure that the most useful data are collected at each volcano following the guidelines of the Santorini report that observation frequency is related to volcano activity, and to communicate the results to the local institutions in a timely fashion. Here we highlight how coordinated multi-satellite observations have been used by volcano observatories to monitor volcanoes and respond to crises. Our primary tool is measurements of ground deformation made by Interferometric Synthetic Aperture Radar (InSAR), which have been used in conjunction with other observations to determine the alert level at these volcanoes, served as an independent check on ground sensors, guided the deployment of ground instruments, and aided situational awareness. During this time period, we find 26 volcanoes deforming, including 18 of the 28 volcanoes that erupted - those eruptions without deformation were less than 2 on the VEI scale. Another 7 volcanoes were restless and the volcano observatories requested satellite observations, but no deformation was detected. We describe the lessons learned about the data products and information that are most needed by the volcano observatories in the different countries using information collected by questionnaires. We propose a practical strategy for regional to global satellite volcano monitoring for use by volcano observatories in Latin America and elsewhere to realize the vision of the Santorini report.

Journal of Applied Volcanology↗

Hole-to-surface resistivity measurements

Hole-to-surface resistivity measurements over a layered volcanic tuff sequence illustrate procedures for gathering, reducing, and interpreting hole-to-surface resistivity data. The magnitude and direction of the total surface electric field resulting from a buried current source is calculated from orthogonal potential difference measurements for a grid of closely spaced stations. A contour map of these data provides a detailed map of the distribution of the electric field away from the drill hole. Resistivity anomalies can be enhanced by calculating the difference between apparent resistivities calculated from the total surface electric field and apparent resistivities for a layered earth model.Lateral discontinutities in the geoelectric section are verified by repeating the surface field measurments for current sources in several drill holes. A qualitative interpretation of the anomalous bodies within a layered earth can be made by using a three-dimensional (3-D) resistivity model in a homogeneous half-space. The general nature of resistive and conductive bodies causing anomalies away from the source drill holes is determined with the aid of data from several source holes, layered models, and 3-D models.

Geophysics↗

Geotechnical aspects of the January 2003 Tecoma'n, Mexico, earthquake

Ground failure was the most prominent geotechnical engineering feature of the 21 January 2003 M w 7.6 Tecoma&acute;n earthquake. Ground failure impacted structures, industrial facilities, roads, water supply canals, and other critical infrastructure in the state of Colima and in parts of the neighboring states of Jalisco and Michoaca&acute;n. Landslides and soil liquefaction were the most common type of ground failure, followed by seismic compression of unsaturated materials. Reinforced earth structures generally performed well during the earthquake, though some structures experienced permanent lateral deformations up to 10 cm. Different ground improvement techniques had been used to enhance the liquefaction resistance of several sites in the region, all of which performed well and exhibited no signs of damage or significant ground deformation. Earth dams in the region experienced some degree of permanent deformation but remained fully functional after the earthquake.

Earthquake Spectra↗

Future opportunities and challenges in remote sensing of drought

The value of satellite remote sensing for drought monitoring was first realized more than two decades ago with the application of Normalized Difference Index (NDVI) data from the Advanced Very High Resolution Radiometer (AVHRR) for assessing the effect of drought on vegetation. Other indices such as the Vegetation Health Index (VHI) were also developed during this time period, and applied to AVHRR NDVI and brightness temperature data for routine global monitoring of drought conditions. These early efforts demonstrated the unique perspective that global imagers such as AVHRR could provide for operational drought monitoring through their near-daily, global observations of Earth's land surface. However, the advancement of satellite remote sensing of drought was limited by the relatively few spectral bands of operational global sensors such as AVHRR, along with a relatively short period of observational record. Remote sensing advancements are of paramount importance given the increasing demand for tools that can provide accurate, timely, and integrated information on drought conditions to facilitate proactive decision making (NIDIS, 2007). Satellite-based approaches are key to addressing significant gaps in the spatial and temporal coverage of current surface station instrument networks providing key moisture observations (e.g., rainfall, snow, soil moisture, ground water, and ET) over the United States and globally (NIDIS, 2007). Improved monitoring capabilities will be particularly important given increases in spatial extent, intensity, and duration of drought events observed in some regions of the world, as reported in the International Panel on Climate Change (IPCC) report (IPCC, 2007). The risk of drought is anticipated to further increase in some regions in response to climatic changes in the hydrologic cycle related to evaporation, precipitation, air temperature, and snow cover (Burke et al., 2006; IPCC, 2007; USGCRP, 2009). Numerous national, regional, and global efforts such as the Famine and Early Warning System (FEWS), National Integrated Drought Information System (NIDIS), and Group on Earth Observations (GEO), as well as the establishment of regional drought centers (e.g., European Drought Observatory) and geospatial visualization and monitoring systems (e.g, NASA SERVIR) have been undertaken to improve drought monitoring and early warning systems throughout the world. The suite of innovative remote sensing tools that have recently emerged will be looked upon to fill important data and knowledge gaps (NIDIS, 2007; NRC, 2007) to address a wide range of drought-related issues including food security, water scarcity, and human health.

Book chapter↗

Landsat yesterday and today: An American vision and an old challenge

Since the late 1960s, the United States government has invested more than $1 billion in designing, launching, and operating the Landsat (land satellite) series of Earth-observing satellites. Global change researchers, geologists, and environmental scientists have used images gathered by the satellites for purposes ranging from human health research, energy exploration, and pollution detection to agricultural assessments, urban growth monitoring, and earthquake lineament studies. The earliest data were captured on a digital medium called wide-band video tape (WBVT). However, two decades of unsound media storage conditions and a poorly maintained processing system have left the physically deteriorating WBVTs with no mechanism for interpretation. A national treasure was in jeopardy. With seed money from the National Aeronautics and Space Administration (NASA), the U.S. Geological Survey (USGS) began a project to rescue the data. More than 21,000 tapes from the 1970s have been transcribed to stable, archival media, preserving the data for future studies in Earth System Science.

Journal of Map & Geography Libraries↗

Ad hoc committee on global climate issues: Annual report

The AAPG Ad Hoc Committee on Global Climate Issues has studied the supposition of human-induced climate change since the committee's inception in January 1998. This paper details the progress and findings of the committee through June 1999. At that time there had been essentially no geologic input into the global climate change debate. The following statements reflect the current state of climate knowledge from the geologic perspective as interpreted by the majority of the committee membership. The committee recognizes that new data could change its conclusions. The earth's climate is constantly changing owing to natural variability in earth processes. Natural climate variability over recent geological time is greater than reasonable estimates of potential human-induced greenhouse gas changes. Because no tool is available to test the supposition of human-induced climate change and the range of natural variability is so great, there is no discernible human influence on global climate at this time.

American Association of Petroleum Geologists Bulle↗

Magmatic evolution of the Gulf of California rift

Magmatic events in the Baja peninsula-Gulf of California region are closely related to sequential tectonic regimes of: (1) late Tertiary subduction beneath the continental margin until ~16 to 12.5 Ma; and (2) continental to oceanic rifting that began about 13 Ma. Orogenic calcalkaline volcanic rocks formed subparallel belts of rhyolite ignimbrite of Oligocene age (~34 to 27 Ma) east of the Gulf in the Sierra Madre Occidental and andesite of Miocene age (~24 to 11 Ma) along the eastern Baja peninsula. Shutoff of the Miocene andesitic arc broadly corresponds to migration of the Pacific-Farallon (Guadalupe)-North America triple junction along the Baja peninsula. Orogenic andesitic volcanism ended at ~16 Ma in northern Baja, and at ~11 Ma in southern Baja, within ~1 to 2 Ma of cessation of subduction. Waning orogenic magmatism persisted along the southern Baja peninsula during the initial stages of rifting. Paleogeographic implications of the distribution of circum-Gulf volcanic rocks and their inferred easterly source areas suggest that, from about 13 to 8 Ma, the rift consisted of a narrow seaway along the eastern side of the present Gulf. By about 6 Ma, the Gulf had broadened westward to approximately its present width. The period from 13 to 10 Ma was a time of tectonic transition and magmatic diversity. During this interval, medium-K calcalkaline, high-K calcalkaline, alkalic, and tholeiitic magmas erupted from the central to southern part of the Baja peninsula-Gulf region, and from about 14 to 8 Ma, rhyolite ignimbrite erupted in the northern Gulf region. Since 10 Ma, volcanism on the western Baja peninsula has been dominated by alkalic magmas, the Gulf margins by calcalkaline magmas, and the Gulf by tholeiitic magmas. Postsubduction calcalkaline andesite to rhyolite erupted sporadically and locally along the northern Gulf margins from ~9 Ma through Holocene time. Alkalic magmas associated with rifting in the Gulf of California are unlike alkalic magmas from intraplate settings. They comprise nepheline- to quartz-normative, basaltic to andesitic rocks characterized by diverse trace element ratios. They are broadly similar to intraplate alkalic rocks in having high K, P, Ba, Sr and the light REE (rare earth elements), but have some trace element characteristics typical of orogenic magmas (low Nb and Ta relative to K, Ba, Sr, and La) that distinguish these alkalic rocks from intraplate or cratonic rift alkalic rocks. Rb abundances (mostly <25 ppm, as low as 5 ppm) are unusually low in these alkalic rocks, both in contrast to the high K (~1.7-4.1 wt% K 2 O), Ba (~800-2200 ppm), and Sr (~1000-3700 ppm), and in comparison to Rb abundances in mafic lavas in general; many samples have Rb at levels typically found in low-K tholeiites. The high K/Rb ratios, mostly ~1000 to 5000, are among the highest reported for any lavas. Samples ranging in SiO 2 from 48 to 61% have Mg’ ≥ 65, indicating that a broad range of compositions may represent primary melts. The generally high Mg’, and the low Rb, Th, Nb, and Ta in some lavas, suggest that depleted refractory mantle equivalent to a mid-ocean ridge basalt (MORB) source contributed to these melts. The distinctive trace element enrichments are attributed to the stabilization in the source of amphibole and apatite from metasomatic fluids related to prior subduction beneath the peninsula. In discrimination diagrams, these alkalic rocks typically cluster outside previously defined fields for various magma types. The common tectonic setting among these and geochemically similar alkalic suites is the occurrence in a continental margin that is undergoing extension, located along a recently or currently active convergent plate boundary. Tholeiitic basalts have erupted since the earliest stages of continental rifting through development of oceanic spreading centers. Gulf of California tholeiites exhibit an evolution distinguished particularly by differences in rare-earth-element (REE) abundances. Early-rift magmas are similar in trace element geochemistry to some intraplate tholeiites from ocean islands and continental flood basalts, and have convex-upward REE patterns. The most recent tholeiites from the East Pacific Rise in the mouth of the Gulf are equivalent to N-MORB (normal mid-ocean ridge basalt) from other mid-ocean rifts, and are depleted in the light-REE. The transition in tholeiite geochemistry from intraplate tholeiite to MORB is attributed to progressive fusion of more refractory mantle components. Incipient-rift tholeiites are derived from selective fusion of clinopyroxenite veins, and with continued melting, N-MORB are formed by fusion of peridotite. This tholeiite sequence reflects the evolution of mantle source regions in rifts that sustain an ensialic to oceanic transition.

Baja California, Baja California Sur↗

Natural thorium resources and recovery: Options and impacts

This paper reviews the front end of the thorium fuel cycle, including the extent and variety of thorium deposits, the potential sources of thorium production, and the physical and chemical technologies required to isolate and purify thorium. Thorium is frequently found within rare earth element&ndash;bearing minerals that exist in diverse types of mineral deposits, often in conjunction with other minerals mined for their commercial value. It may be possible to recover substantial quantities of thorium as a by-product from active titanium, uranium, tin, iron, and rare earth mines. Incremental physical and chemical processing is required to obtain a purified thorium product from thorium minerals, but documented experience with these processes is extensive, and incorporating thorium recovery should not be overly challenging. The anticipated environmental impacts of by-product thorium recovery are small relative to those of uranium recovery since existing mining infrastructure utilization avoids the opening and operation of new mines and thorium recovery removes radionuclides from the mining tailings.

Nuclear Technology↗

Geohydrologic considerations in the management of radioactive waste

Nongaseous radioactive wastes occur as liquids containing high-level concentrations of radionuclides, liquids containing low concentrations of radionuclides, and solids contaminated by radioactivity. Whether released by accident or design into the earth or onto the earth’s surface, only water is capable of transporting significant quantities of radionuclides away from burial sites. Geohydrologic information that must be determined to predict the velocity and direction of waste movement from a site include climate, hydrology, detailed subsurface geology, permeability, porosity, sorptive potential, seismic potential, and geologic history of the area. Since the late 1960’s mathematical models have been used to make predictions of waste transport in some hydrologic systems. Intensive field investigations at each site are needed before these models can be used.

Nuclear Technology↗

New generation hyperspectral sensors DESIS and PRISMA provide improved agricultural crop classifications

Using new remote sensing technology to study agricultural crops will support advances in food and water security. The recently launched, new generation spaceborne hyperspectral sensors, German DLR Earth Sensing Imaging Spectrometer (DESIS) and Italian PRecursore IperSpettrale della Missione Applicativa (PRISMA), provide unprecedented data in hundreds of narrow spectral bands for the study of the Earth. Therefore, our overarching goal in this study was to use these data to explore advances that can be made in agricultural research. We selected PRISMA and DESIS images during the 2020 growing season in California's Central Valley to study seven major crops. PRISMA and DESIS images were highly correlated (R 2of 0.9–0.95). Out of the 235 DESIS bands (400–1000 nm) and 238 PRISMA bands (400–2500 nm), 26 (11%) and 45 (19%) bands, respectively, were optimal to study agricultural crops. These optimal bands provided crop type classification accuracies of 83–90%. Hyperspectral vegetation indices to estimate plant pigment content, stress, biomass, moisture, and cellulose/lignin content were also identified.

California↗