Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Coastal Sediments”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80Linked to original sources

Groundwater spatial variability within an atoll island: Assessing shallow aquifer heterogeneity with geophysical and physicochemical measurements

This study examines the spatial variability of shallow groundwater on Dhigelaabadhoo Island using electromagnetic induction surveys, groundwater monitoring, and sediment analyses. The research reveals how variations in island morphology—such as differences in elevation, reef flat width, and sediment composition—affect the spatial distribution of groundwater lenses and the overall aquifer dynamics. Saltwater intrusion is especially pronounced in low elevated areas, with narrow reef flat plate and areas where higher hydraulic conductivity—driven by the presence of coarser sediments—is observed, whereas regions characterized by finer sediments, higher elevation, and wider reef flat plates tend to support more symmetric and less saline groundwater lenses. The geophysical investigations reveal that tidal oscillations alter groundwater movement by markedly changing water levels and conductivity, thereby underscoring the critical need to account for temporal dynamics in atoll coastal aquifer systems and the importance of integrating tidal dynamics into the aquifer zone. The findings highlight the significant role of intrinsic morphological and external hydrodynamic factors in shaping groundwater distribution on atoll islands, offering critical insights for sustainable freshwater resource management.

Dhigelaabadhoo Island↗

Hydrogeologic framework of the North Carolina Coastal Plain aquifer system

The hydrogeologic framework of the North Carolina Coastal Plain aquifer system consists of ten aquifers separated by nine confining units. From top to bottom the aquifers are: the surficial aquifer, Yorktown aquifer, Pungo River aquifer, Castle Hayne aquifer, Beaufort aquifer, Peedee aquifer, Black Creek aquifer, upper Cape Fear aquifer, lower Cape Fear aquifer, and the Lower Cretaceous aquifer. The uppermost aquifer (the surficial aquifer in most places) is a water-table aquifer and the bottom of the system is underlain by crystalline bedrock. The sedimentary deposits forming the aquifers are of Holocene to Cretaceous age and are composed mostly of sand with lesser amounts of gravel and limestone. Confining units between aquifers are composed primarily of clay and silt. The thickness of the aquifers ranges from zero along the Fall Line to more than 10,000 feet at Cape Hatteras. Prominent structural features are the increasing easterly homoclinal dip of the sediments and the Cape Fear arch, the axis of which trends in a southeast direction. The stratigraphic continuity is determined from correlations of 161 geophysical logs along with data from drillers' and geologists' logs. Aquifers were defined by means of these logs plus water-level and water-quality data and evidence of the continuity of pumping effects. Eighteen hydrogeologic sections depict the correlation of these aquifers throughout the Coastal Plain.

North Carolina↗

Geologic framework of the northern North Carolina, USA inner continental shelf and its influence on coastal evolution

The inner continental shelf off the northern Outer Banks of North Carolina was mapped using sidescan sonar, interferometric swath bathymetry, and high-resolution chirp and boomer subbottom profiling systems. We use this information to describe the shallow stratigraphy, reinterpret formation mechanisms of some shoal features, evaluate local relative sea-levels during the Late Pleistocene, and provide new constraints, via recent bedform evolution, on regional sediment transport patterns. The study area is approximately 290 km long by 11 km wide, extending from False Cape, Virginia to Cape Lookout, North Carolina, in water depths ranging from 6 to 34 m. Late Pleistocene sedimentary units comprise the shallow geologic framework of this region and determine both the morphology of the inner shelf and the distribution of sediment sources and sinks. We identify Pleistocene sedimentary units beneath Diamond Shoals that may have provided a geologic template for the location of modern Cape Hatteras and earlier paleo-capes during the Late Pleistocene. These units indicate shallow marine deposition 15–25 m below present sea-level. The uppermost Pleistocene unit may have been deposited as recently as Marine Isotope Stage 3, although some apparent ages for this timing may be suspect. Paleofluvial valleys incised during the Last Glacial Maximum traverse the inner shelf throughout the study area and dissect the Late Pleistocene units. Sediments deposited in the valleys record the Holocene transgression and provide insight into the evolutionary history of the barrier-estuary system in this region. The relationship between these valleys and adjacent shoal complexes suggests that the paleo-Roanoke River did not form the Albemarle Shelf Valley complex as previously proposed; a major fluvial system is absent and thus makes the formation of this feature enigmatic. Major shoal features in the study area show mobility at decadal to centennial timescales, including nearly a kilometer of shoal migration over the past 134 yr. Sorted bedforms occupy ~ 1000 km2 of seafloor in Raleigh Bay, and indicate regional sediment transport patterns between Capes Hatteras and Lookout that help explain long-term sediment accumulation and morphologic development. Portions of the inner continental shelf with relatively high sediment abundance are characterized by shoals and shoreface-attached ridges, and where sediment is less abundant, the seafloor is dominated by sorted bedforms. These relationships are also observed in other passive margin settings, suggesting a continuum of shelf morphology that may have broad application for interpreting inner shelf sedimentation patterns.

North Carolina↗

Aquifer geochemistry at potential aquifer storage and recovery sites in coastal plain aquifers in the New York city area, USA

The effects of injecting oxic water from the New York city (NYC) drinking-water supply and distribution system into a nearby anoxic coastal plain aquifer for later recovery during periods of water shortage (aquifer storage and recovery, or ASR) were simulated by a 3-dimensional, reactive-solute transport model. The Cretaceous aquifer system in the NYC area of New York and New Jersey, USA contains pyrite, goethite, locally occurring siderite, lignite, and locally varying amounts of dissolved Fe and salinity. Sediment from cores drilled on Staten Island and western Long Island had high extractable concentrations of Fe, Mn, and acid volatile sulfides (AVS) plus chromium-reducible sulfides (CRS) and low concentrations of As, Pb, Cd, Cr, Cu and U. Similarly, water samples from the Lloyd aquifer (Cretaceous) in western Long Island generally contained high concentrations of Fe and Mn and low concentrations of other trace elements such as As, Pb, Cd, Cr, Cu and U, all of which were below US Environmental Protection Agency (USEPA) and NY maximum contaminant levels (MCLs). In such aquifer settings, ASR operations can be complicated by the oxidative dissolution of pyrite, low pH, and high concentrations of dissolved Fe in extracted water.The simulated injection of buffered, oxic city water into a hypothetical ASR well increased the hydraulic head at the well, displaced the ambient groundwater, and formed a spheroid of injected water with lower concentrations of Fe, Mn and major ions in water surrounding the ASR well, than in ambient water. Both the dissolved O2 concentrations and the pH of water near the well generally increased in magnitude during the simulated 5-a injection phase. The resultant oxidation of Fe2+ and attendant precipitation of goethite during injection provided a substrate for sorption of dissolved Fe during the 8-a extraction phase. The baseline scenario with a low (0.001M) concentration of pyrite in aquifer sediments, indicated that nearly 190% more water with acceptably low concentrations of dissolved Fe could be extracted than was injected. Scenarios with larger amounts of pyrite in aquifer sediments generally resulted in less goethite precipitation, increased acidity, and increased concentrations of dissolved Fe in extracted water. In these pyritic scenarios, the lower amounts of goethite precipitated and the lower pH during the extraction phase resulted in decreased sorption of Fe2+ and a decreased amount of extractable water with acceptably low concentrations of dissolved Fe (5.4??10-6M). A linear decrease in recovery efficiency with respect to dissolved Fe concentrations is caused by pyrite dissolution and the associated depletion of dissolved O2 (DO) and increase in acidity. Simulations with more than 0.0037M of pyrite, which is the maximum amount dissolved in the baseline scenario, had just over a 50% recovery efficiency. The precipitation of ferric hydroxide minerals (goethite) at the well screen, and a possible associated decrease in specific capacity of the ASR well, was not apparent during the extraction phase of ASR simulations, but the model does not incorporate the microbial effects and biofouling associated with ferric hydroxide precipitation.The host groundwater chemistry in calcite-poor Cretaceous aquifers of the NYC area consists of low alkalinity and moderate to low pH. The dissolution of goethite in scenarios with unbuffered injectate indicates that corrosion of the well could occur if the injectate is not buffered. Simulations with buffered injectate resulted in greater precipitation of goethite, and lower concentrations of dissolved Fe, in the extracted water. Dissolved Fe concentrations in extracted water were highest in simulations of aquifers (1) in which pyrite and siderite in the aquifer were in equilibrium, and (2) in coastal areas affected by saltwater intrusion, where high dissolved-cation concentrations provide a greater exchange of Fe2+ (FeX2). Results indicate that ASR in pyrite-beari

Applied Geochemistry↗

National assessment of nor’easter-induced coastal erosion hazards: mid- and northeast Atlantic coast

Beaches serve as a natural buffer between the ocean and inland communities, ecosystems, and natural resources. However, these dynamic environments move and change in response to winds, waves, and currents. During extreme storms, changes to beaches can be great, and the results are sometimes catastrophic. Lives may be lost, communities destroyed, and millions of dollars spent on rebuilding. During storms, large waves may erode beaches, and high storm surge may shift the erosive force of the waves higher on the beach. In some cases, the combined effects of waves and surge may cause overwash (when waves and surge overtop the dune, transporting sediment inland) or flooding. Buildings and infrastructure on or near a dune can be undermined during wave attack and subsequent erosion. A number of strong northeast storms—storms with winds tending to blow from the northeast direction—referred to as nor’easters, have hit the mid- and northeast Atlantic coast of the United States in recent years (February 2013 and January 2015). Waves from these storms caused severe erosion, flooding, and undermining of roads in many areas along the northeast Atlantic coast. Waves overtopping a dune can transport water and sand inland, covering roads and blocking evacuation routes or impeding emergency relief. If storm surge inundates barrier island dunes, currents flowing across the island can create a breach, or a new inlet, completely severing evacuation routes. Extreme coastal changes caused by hurricanes or nor’easters may increase the vulnerability of communities both during a storm and to future storms. For example, when sand dunes are substantially eroded, inland structures are exposed to storm surge and waves. On barrier islands, absent or low dunes allow water to flow inland across the island.

Delaware, Maine, Maryland, Massachusetts, New Hamp↗

Processes of fluvial island formation, with examples from Plum Creek, Colorado and Snake River, Idaho

A fluvial island is a landform, elevated above and surrounded by stream-channel branches or waterways, that persists sufficiently long to establish permanent vegetation. Natural fluvial islands occur in any part of a drainage network but most commonly in montane, piedmont-valley, and coastal flood-plain environments. Processes, often interactive, by which islands form include avulsion (the sudden separation of land by a flood or by an abrupt change in the course of a stream), rapid and gradual channel incision, channel migration, dissection of both rapidly and slowly deposited bed sediment, and deposition of bed sediment on a vegetated surface or behind a channel obstruction. Products of high-energy conditions, fluvial islands typically lack stability over decades to millennia. Fluvial islands in Plum Creek, Colorado, USA, results of sorting processes following a recent high-magnitude flood, and in the Snake River, Idaho, USA, partly results of the Pleistocene Bonneville Flood, illustrate how islands form, develop, and disappear. The examples consider differing conditions of island shape, size, height, sediment, and vegetation.

Colorado, Idaho↗

A pollution history of Chesapeake Bay

Present day anthropogenic fluxes of some heavy metals to central Chesapeake Bay appear to be intermediate to those of the southern California coastal region and those of Narragansett Bay. The natural fluxes, however, are in general higher. On the bases of Pb-210 and Pu-239 + 240 geochronologies and of the time changes in interstitial water compositions, there is a mixing of the upper 30 or so centimeters of the sediments in the mid-Chesapeake Bay area through bioturbation by burrowing mollusks and polychaetes. Coal, coke and charcoal levels reach one percent or more by dry weight in the deposits, primarily as a consequence of coal mining operations. ?? 1978.

Geochimica et Cosmochimica Acta↗

Modeling of barrier breaching during Hurricanes Sandy and Matthew

Physical processes driving barrier island change during storms are important to understand to mitigate coastal hazards and to evaluate conceptual models for barrier evolution. Spatial variations in barrier island topography, landcover characteristics, and nearshore and back-barrier hydrodynamics can yield complex morphological change that requires models of increasing resolution and physical complexity to predict. Using the Coupled Ocean-Atmosphere-Wave-Sediment Transport (COAWST) modeling system, we investigated two barrier island breaches that occurred on Fire Island, NY during Hurricane Sandy (2012) and at Matanzas, FL during Hurricane Matthew (2016). The model employed a recently implemented infragravity (IG) wave driver to represent the important effects of IG waves on nearshore water levels and sediment transport. The model simulated breaching and other changes with good skill at both locations, resolving differences in the processes and evolution. The breach simulated at Fire Island was 250 m west of the observed breach, whereas the breach simulated at Matanzas was within 100 m of the observed breach. Implementation of the vegetation module of COAWST to allow three-dimensional drag over dune vegetation at Fire Island improved model skill by decreasing flows across the back-barrier, as opposed to varying bottom roughness that did not positively alter model response. Analysis of breach processes at Matanzas indicated that both far-field and local hydrodynamics influenced breach creation and evolution, including remotely generated waves and surge, but also surge propagation through back-barrier waterways. This work underscores the importance of resolving the complexity of nearshore and back-barrier systems when predicting barrier island change during extreme events.

Florida, New York↗

Mesozoic California and the underflow of Pacific mantle

The Mesozoic evolution of California is interpreted as dominated by the underflow of oceanic mantle beneath the continental margin. Underflow during part of Late Cretaceous time of more than 2000 km of the eastern Pacific plate seems required by the marine magnetic data. Correspondingly, varied oceanic environments—abyssal hill, island arc, trench, oceanic crust, and upper mantle, perhaps also continental rise and abyssal plain—appear to be represented in the eugeosynclinal terranes of California. The rock juxtapositions accord with the concept that these materials were scraped off against the continent as the oceanic plate slid beneath it along Mesozoic Benioff seismic zones, which are now seen as serpentine belts separating profoundly different rock assemblages. The chaotic Franciscan Formation of coastal California consists of deep-ocean Late Jurassic to Late Cretaceous sedimentary, volcanic, crustal, and mantle materials. As open-ocean abyssal oozes and the oceanic crust beneath them were swept into the Benioff-zone trench at the continental margin, they were covered by terrigenous clastic sediments, and the entire complex was carried beneath the correlative continental-shelf and continental-slope deposits (Great Valley sequence) and the older Mesozoic complexes. The other eugeosynclinal terranes of California can be interpreted, albeit with less confidence, in similar terms of underflow of Pacific mantle. In the Klamath Mountains and northern Sierra Nevada, for example, Ordovician and Silurian ocean-floor materials, overlain by or juxtaposed against an Upper Silurian to Permian island arc, were swept in first to the continent, along with a large fragment of oceanic crust and mantle and another fragment of an old orogenic belt. This debris was followed by Permian and Triassic ocean-floor deposits. Late Triassic and Jurassic volcanic products from stocks and batholiths forming in the welded complexes lapped across both landward and oceanward sides of the region. Reversal of Cenozoic extension, strike-slip faulting, and volcanic crustal growth in the western United States reveals a Cretaceous tectonic pattern strikingly like the modern pattern of the Andes, so the paleotectonic setting of North America can be inferred from the South American present. The Mesozoic batholiths of North America, like the late Cenozoic volcanic belt of the central Andes, are products of the same rapid motion of oceanic plates that carried oceanic sediments against the continent to form eugeosynclinal terranes. Magmas generated in the Benioff zones formed the batholiths and the volcanic fields which initially capped them.

California↗

Clostridium perfringens in Long Island Sound sediments: An urban sedimentary record

Clostridium perfringens is a conservative tracer and an indicator of sewage-derived pollution in the marine environment. The distribution of Clostridium perfringens spores was measured in sediments from Long Island Sound, USA, as part of a regional study designed to: (1) map the distribution of contaminated sediments; (2) determine transport and dispersal paths; (3) identify the locations of sediment and contaminant focusing; and (4) constrain predictive models. In 1996, sediment cores were collected at 58 stations, and surface sediments were collected at 219 locations throughout the Sound. Elevated concentrations of Clostridium perfringens in the sediments indicate that sewage pollution is present throughout Long Island Sound and has persisted for more than a century. Concentrations range from undetectable amounts to 15,000 spores/g dry sediment and are above background levels in the upper 30 cm at nearly all core locations. Sediment focusing strongly impacts the accumulation of Clostridium perfringens spores. Inventories in the cores range from 28 to 70,000 spores/cm2, and elevated concentrations can extend to depths of 50 cm. The steep gradients in Clostridium perfringens profiles in muddier cores contrast with concentrations that are generally constant with depth in sandier cores. Clostridium perfringens concentrations rarely decrease in the uppermost sediment, unlike those reported for metal contaminants. Concentrations in surface sediments are highest in the western end of the Sound, very low in the eastern region, and intermediate in the central part. This pattern reflects winnowing and focusing of Clostridium perfringens spores and fine-grained sediment by the hydrodynamic regime; however, the proximity of sewage sources to the westernmost Sound locally enhances the Clostridium perfringens signals.

Connecticut, Massachusetts, New Hampshire, New Jer↗

Geological effects and implications of the 2010 tsunami along the central coast of Chile

Geological effects of the 2010 Chilean tsunami were quantified at five near-field sites along a 200 km segment of coast located between the two zones of predominant fault slip. Field measurements, including topography, flow depths, flow directions, scour depths, and deposit thicknesses, provide insights into the processes and morphological changes associated with tsunami inundation and return flow. The superposition of downed trees recorded multiple strong onshore and alongshore flows that arrived at different times and from different directions. The most likely explanation for the diverse directions and timing of coastal inundation combines (1) variable fault rupture and asymmetrical slip displacement of the seafloor away from the epicenter with (2) resonant amplification of coastal edge waves. Other possible contributing factors include local interaction of incoming flow and return flow and delayed wave reflection by the southern coast of Peru. Coastal embayments amplified the maximum inundation distances at two sites (2.4 and 2.6 km, respectively). Tsunami vertical erosion included scour and planation of the land surface, inundation scour around the bases of trees, and channel incision from return flow. Sheets and wedges of sand and gravel were deposited at all of the sites. Locally derived boulders up to 1 m in diameter were transported as much as 400 m inland and deposited as fields of dispersed clasts. The presence of lobate bedforms at one site indicates that at least some of the late-stage sediment transport was as bed load and not as suspended load. Most of the tsunami deposits were less than 25 cm thick. Exceptions were thick deposits near open-ocean river mouths where sediment supply was abundant. Human alterations of the land surface at most of the sites provided opportunities to examine some tsunami effects that otherwise would not have been possible, including flow histories, boulder dispersion, and vegetation controls on deposit thickness.

Central Coast↗

Mercury in fish, bed sediment, and water from streams across the United States, 1998-2005

Mercury (Hg) was examined in top-predator fish, bed sediment, and water from streams that spanned regional and national gradients of Hg source strength and other factors thought to influence methylmercury (MeHg) bioaccumulation. Sampled settings include stream basins that were agricultural, urbanized, undeveloped (forested, grassland, shrubland, and wetland land cover), and mined (for gold and Hg). Each site was sampled one time during seasonal low flow. Predator fish were targeted for collection, and composited samples of fish (primarily skin-off fillets) were analyzed for total Hg (THg), as most of the Hg found in fish tissue (95-99 percent) is MeHg. Samples of bed sediment and stream water were analyzed for THg, MeHg, and characteristics thought to affect Hg methylation, such as loss-on-ignition (LOI, a measure of organic matter content) and acid-volatile sulfide in bed sediment, and pH, dissolved organic carbon (DOC), and dissolved sulfate in water. Fish-Hg concentrations at 27 percent of sampled sites exceeded the U.S. Environmental Protection Agency human-health criterion of 0.3 micrograms per gram wet weight. Exceedances were geographically widespread, although the study design targeted specific sites and fish species and sizes, so results do not represent a true nationwide percentage of exceedances. The highest THg concentrations in fish were from blackwater coastal-plain streams draining forests or wetlands in the eastern and southeastern United States, as well as from streams draining gold- or Hg-mined basins in the western United States (1.80 and 1.95 micrograms THg per gram wet weight, respectively). For unmined basins, length-normalized Hg concentrations in largemouth bass were significantly higher in fish from predominantly undeveloped or mixed-land-use basins compared to urban basins. Hg concentrations in largemouth bass from unmined basins were correlated positively with basin percentages of evergreen forest and also woody wetland, especially with increasing proximity of these two land-cover types to the sampling site; this underscores the greater likelihood for Hg bioaccumulation to occur in these types of settings. Increasing concentrations of MeHg in unfiltered stream water, and of bed-sediment MeHg normalized by LOI, and decreasing pH and dissolved sulfate were also important in explaining increasing Hg concentrations in largemouth bass. MeHg concentrations in bed sediment correlated positively with THg, LOI, and acid-volatile sulfide. Concentrations of MeHg in water correlated positively with DOC, ultraviolet absorbance, and THg in water, the percentage of MeHg in bed sediment, and the percentage of wetland in the basin.

Scientific Investigations Report↗

Regional and other general factors bearing on evaluation of earthquake and other geologic hazards to coastal communities of southeastern Alaska

The great Alaska earthquake of March 27, 1964, brought into sharp focus the need for engineering geologic studies in seismically active regions. As a result, nine communities in southeastern Alaska were selected for reconnaissance investigations as an integral part of an overall program to evaluate earthquake and other geologic hazards in most of the larger Alaska coastal communities. This report gives background information on the regional and other general factors that bear on these evaluations. Southeastern Alaska, about 525 miles long and averaging about 125 miles in width, consists of a narrow mainland strip and numerous islands. For the most part, it is a region of rugged relief with numerous glaciers capping many of the higher mountainous areas and with long linear fiords forming the inland waterways. A maritime climate prevails with mild winters and cool summers. The southeastern part of the region receives the highest precipitation in the continental United States. Ketchikan, with a population of 6,994 in 1970, is the largest city. Geology and structure of the area are complex. Igneous, metamorphic, and sedimentary rocks crop out and range in age from Paleozoic to Tertiary. Surficial deposits of Pleistocene and Holocene age mantle many areas. All of southeastern Alaska, except probably the highest peaks, was covered by glacier ice advances of late Pleistocene age. Major deglaciation was well advanced by 10,000 years ago--a time which approximately marks the end of the Pleistocene and the beginning of the Holocene. There followed a period of warm climate called the Hypsithermal, which in southeastern Alaska began 7,000-8,000 years ago and ended about 4,800-3,500 years ago. Glaciers in most places receded back of their present positions. The Hypsithermal was followed by an interval (termed Neoglaciation) of cooler climate and resurgence of glacier ice which continues to the present, although most glaciers are now rapidly receding. During the past 10,000 years worldwide sea level has risen about 100 feet, but during the past 4,000 years it has risen only about 10 feet or about 0.03 inch per year. With sea level used as a datum, the amount of sea-level rise must be added to the apparent uplift of land for the time under consideration to determine the actual amount of land uplift. The widespread presence of emergent marine deposits, several hundred feet above sea level, demonstrates that the land in southeastern Alaska has been uplifted since the last major deglaciation. The greatest known has been uplifted since the last major deglaciation. The greatest known uplift is in the vicinity of Juneau where glaciomarine deposits are present 750 feet above present sea level. Part of southeastern Alaska is presently undergoing one of the most rapid rates of uplift of any place in the world. The fastest emergence is occurring in the Glacier Bay area where the land is being uplifted relative to sea level approximately 3.9 cm per year. Most or all of the uplift appears to be due to rebound as a result of deglaciation. Southeastern Alaska lies within the circum-Pacific earthquake belt, one of the world's greatest zones of seismic activity. During historic time, there have been five earthquakes in the region with magnitudes of 8 or greater, three with magnitudes of 7 to 8, eight with magnitudes of 6 to 7, more than 15 with magnitudes of 5 to 6, and about 140 recorded earthquakes with magnitudes smaller than 5 or of unassigned magnitudes. All of the earthquakes with magnitudes 8 or greater, and a large proportion of the others, appear to be related to the active Fairweather- Queen Charlotte Islands fault system or its western extension, the Chugach-St. Elias fault. Earthquake epicenters on the Denali fault system, the other major fault system in southeastern Alaska, are few in comparison. However, because high microearthquake activity has been recorded recently on this system and earthquakes of moderate size have occurred on some of its segments, the Denali fault system probably should not be dismissed as a relict fault system of no current tectonic importance. There are numerous other known faults, as well as lineaments that may be faults of varying degrees of tectonic activity in southeastern Alaska, adjacent Canada, and eastern Alaska. One of these elements is the Totschunda fault system, which connects with the Denali fault system in eastern Alaska; it has been very active during Holocene time but few historical earthquake epicenters appear to be related to it. Both historical seismicity and geologic conditions, such as frequency and recency of faulting, must be considered together to permit an assessment of the future earthquake probability of an area. Data are too few for both factors for an accurate evaluation to be made of earthquake probability in southeastern Alaska. However, information compiled in the form of strain-release and seismic-zone maps permit some generalizations. Thus, it is tentatively concluded that most, if not all, of southeastern Alaska should be placed in seismic zone 3, a zone in which earthquakes of magnitude greater than 6 will occur from time to time and where there may be major damage to manmade structures. Inferred effects from future earthquakes in southeastern Alaska include: (1) surface displacement along faults and other tectonic land-level changes, (2) ground shaking, (3) compaction, (4) liquefaction in cohesionless materials, (5) reaction of sensitive and quick clays, (6) water-sediment ejection and associated subsidence and ground fracturing, (7) earthquake-induced sub aerial slides and slumps, (8) earthquake induced subaqueous slides, (9) effects on glaciers and related features, (10) effects on ground water and stream flow, and (11) tsunamis, seiches, and other abnormal water waves. Because of the reconnaissance nature of our studies in the coastal communities and the sparsity of laboratory data on physical properties of geologic units in each area studied, the inferred effects must be largely empirical and generalized. Therefore, the inferences are based in large part upon the effects of past major earthquakes in Alaska and elsewhere, particularly upon the well-documented effects of the Alaska earthquake of March 27, 1964. Buildings, highways, bridges, tunnels, harbor facilities, pipelines, canals, and other manmade structures may be severely damaged or destroyed by fault displacement or related tectonic land-level changes in southeastern Alaska. Direct damage from fault rupture would be restricted virtually to structures built directly athwart the fault. In California and Nevada, fault rupture almost always accompanies shocks of magnitude 6.5 or greater. The Alaska earthquake of March 27, 1964, and the Chilean earthquake of May 22, 1960, dramatically illustrated the severe adverse effects that can result from uplift or subsidence over a wide area. The variable most responsible for the degree of shaking at any epicentral distance is the type of ground. Generally, shaking is considerably greater in poorly consolidated deposits than in hard bedrock, particularly if the deposits are water saturated. Severe shaking of alluvial deposits and manmade fill, with resultant heavy damage, is well documented from the records of many past earthquakes. Damage commonly has been heavy as a result of ground settlement caused by compaction of loose sediments by shaking during an earthquake. This has been especially true where compaction was accompanied by tectonic downdrop of land, such as occurred during the Chilean earthquake of 1960 and the Alaska earthquake of 1964. Loosely emplaced manmade fill, deltaic deposits, beach deposits, and alluvial deposits may be susceptible to compaction in southeastern Alaska during a severe earthquake. Liquefaction of sand and silt is a fairly common effect of large earthquakes. It was well illustrated at Niigata, Japan, during the earthquake of June 16, 1964, and resulted in extensive damage. When part of a sloping soil mass liquefies, the entire mass can undergo catastrophic failure and can flow as a high-density liquid. In southeastern Alaska, deltaic deposits probably would be most susceptible to liquefaction. Sensitive and quick clays, which lose a considerable part of their strength when shaken, commonly fail during an earthquake and become rapid earthflows. Extensive studies were made of the sensitivity of the Bootlegger Cove Clay at Anchorage because of the marked loss of shear strength and dramatic failures of the deposits during the Alaska earthquake of 1964. If similar sensitive clays are present in some places in southeastern Alaska, they most likely are in some of the emergent fine-grained marine deposits; supporting data to confirm their presence, however, are largely lacking. Records of some 50 major earthquakes show that in at least half of the instances water and sediment have been ejected from surficial deposits Water-sediment ejection and associated subsidence and ground fracturing commonly cause extensive damage to the works of man. Ejecta may fill basements and other low-lying parts of buildings. Agricultural land can be covered with a blanket of infertile soils, and small ponds can be filled or made shallow. In southeastern Alaska these phenomena are most likely to occur on valley floors, deltas, tidal flats, alluvial fans, swamps, and lakeshores. Earthquake-induced sliding on land generally is confined to steep slopes but may take place in fine-grained deposits on moderately to nearly flat surfaces if the deposits are subject to liquefaction. A large rockslide triggered by the Lituya Bay, Alaska, earthquake of July 10, 1958, generated a wave that surged up the opposite wall of the inlet to a record height of 1,740 feet. During the Hebgen Lake, Montana, earthquake of August 17, 1959, a spectacular rockslide plunged into the Madison River canyon, buried 28 people, dammed the river, and created a large lake. Earthquake-records are replete with accounts of sliding of surficial deposits during moderate to large earthquakes. Most or all of the general factors that favor subaerial landsliding are present in southeastern Alaska. Earthquake-induced subaqueous slides can produce adverse effects both nearshore and some distance offshore. Nearshore sliding may progress shoreward and destroy harbor facilities and other structures, commonly with substantial loss of life. Disastrous large submarine slides occurred along the fronts of deltas in Seward and Valdez during the Alaska earthquake of 1964. In similar fashion, the largest submarine slides in southeastern Alaska likely will be triggered along the larger delta fronts. Sliding farther offshore can constitute a threat to navigation because of changes in water depths. Also underwater sliding can break communication cables. Glaciers were not greatly affected by the Alaska earthquake of 1964 despite the fact that about 20 percent of the area that underwent strong shaking is covered by ice. In contrast, the cataclysmic avalanche of ice and rock that fell from a high glacier-covered peak in Peru during the earthquake of May 31, 1970, produced devastating effects downvalley on man and his works in the form of mudflows. Most towns in southeastern Alaska are sufficiently distant from glaciers so as not be to directly affected. Both the Alaska earthquake of 1964 and the Hebgen Lake, Montana, earthquake of 1959 significantly affected ground- and surface-water regimens. Water levels in some wells declined whereas in others flow increased. Some springs discharged at a rate three times as much as normal; flow of others decreased or stopped. Discharge of many streams increased markedly. Most or all of the effects described above could occur in parts of southeastern Alaska during future large earthquakes. Tsunamis, seiches, and other abnormal water waves associated with large earthquakes commonly cause vast property damage and heavy loss of life. Tsunami effects can be devastating to coastal areas as far as many thousands of miles from their generation source. Seiche effects generally are confined to inland bodies of water or to relatively enclosed coastal bodies of water. Abnormal waves generated by submarine sliding or by subaerial sliding into water generally produce only local effects but may be highly devastating. Tsunami waves resulting from the Chilean earthquake of 1960 inflicted extensive damage and loss of life on coastal communities throughout a large part of southern Chile, and significant runups and damage were recorded in many places throughout the Pacific Ocean area. The tsunami waves generated by the Alaska earthquake of 1964 struck with devastating force along a broad stretch of the Alaska coast and produced heavy property damage and loss of life as far away as Crescent City, Calif. Seiche waves generated by that earthquake reached runup heights of 20-30 feet on some lakes in Alaska, and water-level fluctuations were recorded on streams, reservoirs, lakes, and swimming pools in States bordering the Gulf of Mexico. Waves generated by submarine sliding struck violently at a number of places during or immediately after the quake and were the major cause of loss of life and damage to property. Slide-generated waves probably would have a higher destructive potential in southeastern Alaska than either tsunami waves or seiche waves because of their possibly higher local runups and because they can hit the shores almost without warning during or immediately after an earthquake. Nonearthquake-related geologic hazards, although generally far less dramatic than those related to earthquakes, tend to occur so much more frequently or persistently that their aggregate effects can be significant. Three kinds of geologic hazards of this type are discussed: (1) nonearthquake-induced landsliding and subaqueous sliding, (2) flooding, and (3) land uplift. The potential for nonearthquake-triggered landsliding in southeastern Alaska ranges widely from place to place. Past sliding generally furnishes the clue in the prediction of where and in what materials future sliding will occur. Fast-moving rockslides, debris slides, and mudflows can be expected to occur from time to time on steep slopes and be highly destructive to highways, power plants, pipelines, buildings, and other facilities located on a slope or at its base. Present slow downslope movement of talus can be expected to continue at the same general rate unless conditions are changed by man or there are climatic changes. Snow and debris avalanches can be especially hazardous during winter months. Long-inactive landslides may be triggered into renewed activity or new slides may be created by man-induced modifications. Accelerated slope erosion and debris flows may follow large-scale clearing and cutting of timber. Subaqueous sliding can be expected to occur periodically along fronts of deltas and on other oversteepened underwater slopes. Floods have been common in parts of southeastern Alaska because of heavy precipitation and rapid runoff from steep slopes with resulting heavy damage to roads and other facilities. Continued damage can be expected in the future unless more remedial measures are taken. Current uplift of land in southeastern Alaska, although probably not affecting man significantly in a short period of time, may have some adverse long-term effects. These long-term effects should be borne in mind when facilities such as docks and boat harbors are constructed on or near the shore, where there is a critical relation between height of land and water.

Alaska↗

Puerto Rico: Marine sediments, terrestrial and seafloor imagery, and tectonic interpretations

Introduction: Puerto Rico is an island situated in the plate boundary zone between the Caribbean and the North American Plates. This is a geologically fascinating, tectonically active region, where the Caribbean Plate has over-ridden the North American Plate and is now sliding past it with strike-slip motion. The details of this tectonic interaction are poorly understood, largely because much of the region lies under water, making it difficult to study. The geologic setting of Puerto Rico has created or contributed to several pressing societal issues, related to human safety, environmental health, and economic development. Because the island lies on an active plate boundary, earthquakes are a constant threat and the densely populated coastal areas are vulnerable to tsunamis. Coastal erosion is a concern in many coastal areas, but is particularly serious to an island economy which relies heavily on a thriving tourist industry. In Puerto Rico, illegal mining of beach sands for use as aggregate has exacerbated coastal erosion and left coastal communities more exposed to the ravages of storms and tsunamis. The serious need for an affordable local source of aggregate to use in the growing construction industry on the island has created a strong interest in locating and evaluating offshore sand and gravel deposits. During the last 20 years the U.S. Geological Survey, often in cooperation with the Puerto Rico Department of Natural Resources and/or the University of Puerto Rico, has conducted a variety of projects to address the geologic aspects of these pressing societal issues. The papers and data presented here are the results of these projects. Some have been previously published elsewhere; others, such as the database of surficial sediments of the Puerto Rico insular shelf, interpretation of side-looking airborne radar imagery of the island, and the GIS data, are presented here for the first time. The purpose of this CD is to make the results of these diverse studies available in a readily accessible digital form, so that managers, planners, and other researchers can utilize the results.

Puerto Rico↗

The stream net as an indicator of cryptic systematic fracturing in Louisiana

The stream net in many parts of Louisiana includes straight reaches with preferred alignment in a few directions, with some examples spanning tens of kilometers. In places the reaches form classic rectangular drainage patterns. These characteristics are obvious on maps at a variety of scales, and are recognizable on some portion of nearly every 7.5-minute quadrangle in the state, excepting those quadrangles situated entirely within the Ho??ocene coastal marshes or the Holocene flood plains of the larger rivers. Such patterns of lineaments are reminiscent of patterns associated with systematic fracturing in other regions. In Louisiana, however, verification and measurement of fractures that may exist in the vicinity of rectilinear drainage anomalies is problematic because surface deposits are comparatively young and sparsely exposed, and tend, especially near waterways, to be heavily weathered and vegetated. An indirect approach to evaluating the potential influence on drainage by fracturing involves evaluating the frequency distribution of stream-course orientations based on its degree of similarity with that of the strikes of previously mapped or reported fractures (faults and/or joints). A rose diagram of orientation frequencies for the stream net of the entire state, created utilizing a publicly available line dataset processed into 100-m segments (N 290,000), shows a nonrandom distribution with three visually identifiable trends: the strongest, oriented essentially N-S; a subsidiary trend oriented N20??-30??W; and a weak trend oriented N80??-90??W. The entire population of orientations yields a mean direction of N17.5??W ?? 4.2?? with a probability of 95 percent. The strike frequencies of mapped faults show little correspondence with these trends. This suggests, if mapped faults are at least representative of actual faults, that insofar as apparent lineaments reflect structure and not the influence of a south-southeasterly regional drainage gradient, they predominantly reveal the influence of joints. These could reflect either a Quaternary stress regime, or propagation in young sediment of a structural pattern in underlying older strata. The data available at present do not compel either interpretation, though in south Louisiana at least, where reactivated early Tertiary growth faults have surface expression that in places is juxtaposed with differently oriented drainage lineaments, propagation of a preexisting pattern from depth appears plausible. Widespread systematic fracturing in this predominantly Quaternary coastal-plain setting could have important implications for groundwater flow and for other processes that depend substantially on permeability.

Southeastern Geology↗

Biochemical indicators for the bioavailability of organic carbon in ground water

The bioavailability of total organic carbon (TOC) was examined in ground water from two hydrologically distinct aquifers using biochemical indicators widely employed in chemical oceanography. Concentrations of total hydrolyzable neutral sugars (THNS), total hydrolyzable amino acids (THAA), and carbon‐normalized percentages of TOC present as THNS and THAA (referred to as “yields”) were assessed as indicators of bioavailability. A shallow coastal plain aquifer in Kings Bay, Georgia, was characterized by relatively high concentrations (425 to 1492 μM; 5.1 to 17.9 mg/L) of TOC but relatively low THNS and THAA yields (∼0.2%–1.0%). These low yields are consistent with the highly biodegraded nature of TOC mobilized from relatively ancient (Pleistocene) sediments overlying the aquifer. In contrast, a shallow fractured rock aquifer in West Trenton, New Jersey, exhibited lower TOC concentrations (47 to 325 μM; 0.6 to 3.9 mg/L) but higher THNS and THAA yields (∼1% to 4%). These higher yields were consistent with the younger, and thus more bioavailable, TOC being mobilized from modern soils overlying the aquifer. Consistent with these apparent differences in TOC bioavailability, no significant correlation between TOC and dissolved inorganic carbon (DIC), a product of organic carbon mineralization, was observed at Kings Bay, whereas a strong correlation was observed at West Trenton. In contrast to TOC, THNS and THAA concentrations were observed to correlate with DIC at the Kings Bay site. These observations suggest that biochemical indicators such as THNS and THAA may provide information concerning the bioavailability of organic carbon present in ground water that is not available from TOC measurements alone.

Ground Water↗

Observations and morphodynamic modeling of decadal-scale morphologic change in estuaries under sea level rise

Sea level rise is expected to affect coastal areas all around the world, including the estuarine environment. New bathymetry collected in 2014 provided a unique opportunity to test the modeling of Elmilady et al. (2019), who presented a morphodynamic DELFT3D model of San Pablo Bay, California, that included detailed tidal water movement, wind-wave action, sediment transport, and resulting bed level updates. Their hindcasts (1856–1983) showed significant skill in reproducing observed patterns and volumes of deposition and erosion in San Pablo Bay. Their forecasts (1983–2100) showed that sea level rise results in increased deposition, loss of intertidal flats because of drowning, and a greater channel volume. The model, in general, forecasted observed trends in change from 1983 to 2014. Morphodynamic modeling is a promising approach for identifying the effect of sea level rise on estuarine environments.

California↗

Quantitative x-ray diffraction mineralogy of Los Angeles basin core samples

This report contains X-ray diffraction (XRD) analysis of mineralogy for 81 sediment samples from cores taken from three drill holes in the Los Angeles Basin in 2000-2001. We analyzed 26 samples from Pier F core, 29 from Pier C core, and 26 from the Webster core. These three sites provide an offshore-onshore record across the Southern California coastal zone. This report is designed to be a data repository; these data will be used in further studies, including geochemical modeling as part of the CABRILLO project. Summary tables quantify the major mineral groups, whereas detailed mineralogy is presented in three appendices. The rationale, methodology, and techniques are described in the following paper.

Open-File Report↗