Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “American Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80Linked to original sources

Differentiating pedogenesis from diagenesis in early terrestrial paleoweathering surfaces formed on granitic composition parent materials

Unconformable surfaces separating Precambrian crystalline basement and overlying Proterozoic to Cambrian sedimentary rocks provide an exceptional opportunity to examine the role of primitive soil ecosystems in weathering and resultant formation of saprolite (weathered rock retaining rock structure) and regolith (weathered rock without rock structure), but many appear to have been affected by burial diagenesis and hydrothermal fluid flow, leading some researchers to discount their suitability for such studies. We examine one modern weathering profile (Cecil series), four Cambrian paleoweathering profiles from the North American craton (Squaw Creek, Franklin Mountains, Core SQ-8, and Core 4), one Neoproterozoic profile (Sheigra), and one late Paleoproterozoic profile (Baraboo), to test the hypothesis that these paleoweathering profiles do provide evidence of primitive terrestrial weathering despite their diagenetic and hydrothermal overprinting, especially additions of potassium. We employ an integrated approach using (1) detailed thin-section investigations to identify characteristic pedogenic features associated with saprolitization and formation of well-drained regoliths, (2) electron microprobe analysis to identify specific weathered and new mineral phases, and (3) geochemical mass balance techniques to characterize volume changes during weathering and elemental gains and losses of major and minor elements relative to the inferred parent materials. There is strong pedogenic evidence of paleoweathering, such as clay illuviation, sepic-plasmic fabrics, redoximorphic features, and dissolution and alteration of feldspars and mafic minerals to kaolinite, gibbsite, and Fe oxides, as well as geochemical evidence, such as whole-rock losses of Na, Ca, Mg, Si, Sr, Fe, and Mn greater than in modern profiles. Evidence of diagenesis includes net additions of K, Ba, and Rb determined through geochemical mass balance, K-feldspar overgrowths in overlying sandstone sections, and K-feldspars with reaction rims in weathered basement. The sub-Cambrian paleoweathering profiles formed on granite are remarkably similar to modern weathering profiles formed on granite, in spite of overprinting by potassium diagenesis. ?? 2007 by The University of Chicago. All rights reserved.

Journal of Geology↗

Hydrogeology and paths of flow in the carbonate bedrock aquifer, northwestern Indiana

The U.S. Geological Survey (USGS) is assessing the ground.water resources of the carbonate bedrock aquifers in Indiana and Ohio as part of their Regional Aquifer Systems Analysis program. Part of this assessment includes the determination of unknown aspects of the hydraulic characteristics, boundaries, and flow paths of the carbonate aquifer. To accomplish this, the USGS drilled three wells through the carbonate aquifer near the Kankakee River in northwestern Indiana. Geophysical logs were used to help determine depths and thicknesses for testing and to help describe geology at the three wells. Packer tests were used to determine direction of ground-water flow and to provide data for an analysis of the distribution of transmissivity in the carbonate aquifer. Transmissivity of the carbonates is associated with two physical characteristics of the rocks: fractures and interconnected porosity. Almost all of the transmissivity is derived from horizontal fracturing; however, only a few of the fractures present in the carbonate are transmissive. Some transmissivity is associated with a zone of fossiliferous, vuggy dolomite, which yields water from the rock matrix. Most of the transmissivity is associated with large fractures and solution crevices in the upper 30 feet of the bedrock; less transmissivity is associated with the deeper vuggy reef material, even where extensively fractured. Transmissivity of individual fractures and fossiliferous zones ranges from 300 to 27,000 feet squared per day. The aquifer bottom is defined by a lack of transmissive fractures and an increased shale content near the contact of the Silurian and Ordovician sections. Water-level data from the three wells indicate that flow is horizontal at well site 1 north of the Kankakee River, upward at well site 2 near the river, and downward at well site 3 south of the river. Most of the flow occurs in the upper part of the carbonate bedrock where fracturing and solution-enlarged crevices are most developed. Water levels indicate the the Kankakee River is a hydrologic boundary for the regional carbonate bedrock aquifer.

Indiana↗

Discussion of “Forecasting stream‐flow of the Salt River, Arizona”

Matthew I. Rorabaugh (U.S. Geological Survey, Louisville, Kentucky, August 27, 1945)—In regions where snow is not a factor there is some advantage in making forecasts based on the effects of travel time and base flow. However, the runoff which results from precipitation during the period of forecast usually constitutes a substantial portion of the flow in many streams, and accordingly these predictions may be highly speculative. The authors state that on March 1 an average of 52 per cent of the winter flow of Parker Creek has passed the gaging station on that creek while only 36 per cent of the winter flow of the Salt River has reached Roosevelt Reservoir. The forecast is based on this lag, which would approximate 16 per cent of the winter flow of the Salt River or about 25 per cent of the flow during March to May. In giving reasons for the lag the authors minimize the effect of accumulated snow, because less than 15 per cent of the Salt River Basin is thought to have accumulated snow. It may be, however, that the snow on this portion of the basin is the principal reason for the lag. The snow cover accumulates at high altitudes, where precipitation is heaviest and temperatures lowest. As losses will be proportionally less in these low‐temperature areas than in the remainder of the basin, it follows that storage of 25 per cent of the flow could result from snow accumulation on less than 15 per cent of the basin.

Eos, Transactions, American Geophysical Union↗

Strange bedfellows - A deep-water hermatypic coral reef superimposed on a drowned barrier island; Southern Pulley Ridge, SW Florida platform margin

The southeastern component of a subtle ridge feature extending over 200 km along the western ramped margin of the south Florida platform, known as Pulley Ridge, is composed largely of a non-reefal, coastal marine deposit. Modern biostromal reef growth caps southern Pulley Ridge (SPR), making it the deepest hermatypic reef known in American waters. Subsurface ridge strata are layered, lithified, and display a barrier island geomorphology. The deep-water reef community is dominated by platy scleractinian corals, leafy green algae, and coralline algae. Up to 60% live coral cover is observed in 60-75 m of water, although only 1-2% of surface light is available to the reef community. Vertical reef accumulation is thin and did not accompany initial ridge submergence during the most recent sea-level rise. The delayed onset of reef growth likely resulted from several factors influencing Gulf waters during early stages of the last deglaciation (???14 kyr B.P.) including; cold, low-salinity waters derived from discrete meltwater pulses, high-frequency sea-level fluctuations, and the absence of modern oceanic circulation patterns. Currently, reef growth is supported by the Loop Current, the prevailing western boundary current that impinges upon the southwest Florida platform, providing warm, clear, low-nutrient waters to SPR. The rare discovery of a preserved non-reefal lowstand shoreline capped by rich hermatypic deep-reef growth on a tectonically stable continental shelf is significant for both accurate identification of late Quaternary sea-level position and in better constraining controls on the depth limits of hermatypic reefs and their capacity for adaptation to extremely low light levels. ?? 2004 Elsevier B.V. All rights reserved.

Florida↗

Effects of land use and sample location on nitrate-stream flow hysteresis descriptors during storm events

The U.S. Geological Survey's New Jersey and Iowa Water Science Centers deployed ultraviolet-visible spectrophotometric sensors at water-quality monitoring sites on the Passaic and Pompton Rivers at Two Bridges, New Jersey, on Toms River at Toms River, New Jersey, and on the North Raccoon River near Jefferson, Iowa to continuously measure in-stream nitrate plus nitrite as nitrogen (NO 3 + NO 2 ) concentrations in conjunction with continuous stream flow measurements. Statistical analysis of NO 3 + NO 2 vs . stream discharge during storm events found statistically significant links between land use types and sampling site with the normalized area and rotational direction of NO 3 + NO 2 -stream discharge (N-Q) hysteresis patterns. Statistically significant relations were also found between the normalized area of a hysteresis pattern and several flow parameters as well as the normalized area adjusted for rotational direction and minimum NO 3 + NO 2 concentrations. The mean normalized hysteresis area for forested land use was smaller than that of urban and agricultural land uses. The hysteresis rotational direction of the agricultural land use was opposite of that of the urban and undeveloped land uses. An r 2 of 0.81 for the relation between the minimum normalized NO 3 + NO 2 concentration during a storm vs . the normalized NO 3 + NO 2 concentration at peak flow suggested that dilution was the dominant process controlling NO 3 + NO 2 concentrations over the course of most storm events.

Iowa, New Jersey↗

Global daily reference evapotranspiration modeling and evaluation

Accurate and reliable evapotranspiration (ET) datasets are crucial in regional water and energy balance studies. Due to the complex instrumentation requirements, actual ET values are generally estimated from reference ET values by adjustment factors using coefficients for water stress and vegetation conditions, commonly referred to as crop coefficients. Until recently, the modeling of reference ET has been solely based on important weather variables collected from weather stations that are generally located in selected agro-climatic locations. Since 2001, the National Oceanic and Atmospheric Administration’s Global Data Assimilation System (GDAS) has been producing six-hourly climate parameter datasets that are used to calculate daily reference ET for the whole globe at 1-degree spatial resolution. The U.S. Geological Survey Center for Earth Resources Observation and Science has been producing daily reference ET (ETo) since 2001, and it has been used on a variety of operational hydrological models for drought and streamflow monitoring all over the world. With the increasing availability of local station-based reference ET estimates, we evaluated the GDAS-based reference ET estimates using data from the California Irrigation Management Information System (CIMIS). Daily CIMIS reference ET estimates from 85 stations were compared with GDAS-based reference ET at different spatial and temporal scales using five-year daily data from 2002 through 2006. Despite the large difference in spatial scale (point vs . ∼100 km grid cell) between the two datasets, the correlations between station-based ET and GDAS-ET were very high, exceeding 0.97 on a daily basis to more than 0.99 on time scales of more than 10 days. Both the temporal and spatial correspondences in trend/pattern and magnitudes between the two datasets were satisfactory, suggesting the reliability of using GDAS parameter-based reference ET for regional water and energy balance studies in many parts of the world. While the study revealed the potential of GDAS ETo for large-scale hydrological applications, site-specific use of GDAS ETo in complex hydro-climatic regions such as coastal areas and rugged terrain may require the application of bias correction and/or disaggregation of the GDAS ETo using downscaling techniques.

Journal of the American Water Resources Associatio↗

Harmonization of a water withdrawal dataset for the conterminous United States

The U.S. Geological Survey is developing nationally consistent water-use modeling approaches to replace previous methods relying on locally specific reported and estimated data. These national assessments require datasets that incorporate water withdrawal variability across the United States and over long periods. However, source data often have unclear definitions, missing or varied units, differing temporal resolutions, varied data quality, and inconsistent formats, which hinder automation and require individualized processing. The public-supply datasets described in this paper were used in machine learning models to estimate annual and monthly public-supply water use for 2000–2020 for the conterminous United States (CONUS) and in a model to estimate public-supply deliveries. Public-supply withdrawal data were acquired for the CONUS and the District of Columbia; however, 11 states had annual data for only 1 year, and 10 states had no monthly data. Annual withdrawal data were acquired for 81% of public-supply water service areas, and monthly withdrawal data were acquired for 47% for at least 1 year from 2000 to 2020. These datasets and methods provide the most comprehensive collection of reported public-supply withdrawals to date and can be used by water-use managers, the scientific community, and the broader public. The extensive data processing described herein can be applicable to datasets representing other categories of water use.

conterminous United States↗

Using a mechanistic model to develop management strategies to cool Apache Trout streams under the threat of climate change

User‐friendly stream temperature models populated with on‐site data may help in developing strategies to manage temperatures of individual stream reaches that are subject to climate change. We used the field‐tested Stream Segment Temperature model (U.S. Geological Survey) to simulate how altering discharge, groundwater input, channel wetted width, and shade prevents the temperatures of White Mountain, Arizona, stream reaches from exceeding the thermal tolerance of Apache Trout Oncorhynchus apache , both under existing conditions and under a climate change scenario. Simulations suggested increasing shade, either through streamside planting of specific numbers and species of plants or by other means, would be most effective and feasible for cooling the stream reaches we studied. Ponderosa pine Pinus ponderosa and Douglas fir Pseudotsuga menziesii provided the most shade followed in order by Engelman spruce Picea engelmannii , Bebb's willow Salix bebbiana , Arizona alder Alnus oblongifolia , and finally coyote willow Salix exigua . Vegetation survival depends on the appropriateness of site conditions at present and under climate change, and planting in buffer strips minimizes additional water removal from the watershed through evapotranspiration. Alternative shading options, including thick sedge growth, shade cloth, or felled woody vegetation, may be considered when environmental conditions do not support plantings. Increasing groundwater input can cool streams, but additional sources are scarce in the region. Decreasing the width‐to‐depth ratio would succeed best on reaches with widths greater than 2.0 m. Increasing discharge from upstream may lower water temperature on reaches with an initial discharge greater than 0.5 m 3 /s. Existing models provide suggestions to cool stream reaches. Further development of accessible software packages that incorporate evaporation, fragmentation, and other projected climate change effects into their routines will provide additional tools to help manage climate change effects.

Arizona↗

Geologic framework of lower Cook Inlet, Alaska

Three seismic reflectors are present throughout the lower Cook Inlet basin and can be correlated with onshore geologic features. The reflections come from unconformities at the base of the Tertiary sequence, at the base of Upper Cretaceous rocks, and near the base of Upper Jurassic strata. A contour map of the deepest horizon shows that Mesozoic rocks are formed into a northeast-trending syncline. Along the southeast flank of the basin, the northwest-dipping Mesozoic rocks are truncated at the base of Tertiary rocks. The Augustine-Seldovia arch trends across the basin axis between Augustine Island and Seldovia. Tertiary rocks thin onto the arch from the north and south. Numerous anticlines, smaller in structural relief and breadth than the Augustine-Seldovia arch, trend northeast parallel with the basin, and intersect the arch at oblique angles. The stratigraphic record shows four cycles of sedimentation and tectonism that are bounded by three regional unconformities in lower Cook Inlet and by four thrust faults and the modern Benioff zone in flysch rocks of the Kenai Peninsula and the Gulf of Alaska. The four cycles of sedimentation are, from oldest to youngest, the early Mesozoic, late Mesozoic, early Cenozoic, and late Cenozoic. Data on organic geochemistry of the rocks from one well suggest that Middle Jurassic strata may be a source of hydrocarbons. Seismic data show that structural traps are formed by northeast-trending anticlines and by structures formed at the intersections of these anticlines with the transbasin arch. Stratigraphic traps may be formed beneath the unconformity at the base of Tertiary strata and beneath unconformities within Mesozoic strata.

Alaska↗

Fish assemblages and environmental correlates in least-disturbed streams of the upper Snake River basin

Fish assemblages and environmental variables were evaluated from 37 least‐disturbed, 1st‐ through 6th‐order streams and springs in the upper Snake River basin, western USA. Data were collected as part of the efforts by the U.S. Geological Survey National Water Quality Assessment Program and the Idaho State University Stream Ecology Center to characterize aquatic biota and associated habitats in least‐disturbed coldwater streams. Geographically, the basin comprises four ecoregions. Environmental variables constituting various spatial scales, from watershed characteristics to instream habitat measures, were used to examine distribution patterns in fish assemblages. Nineteen fish species in the families Salmonidae, Cottidae, Cyprinidae, and Catostomidae were collected. Multivariate analyses showed high overlap in stream fish assemblages among the ecoregions. Major environmental factors determining species distributions in the basin were stream gradient, watershed size, conductivity, and percentage of the watershed covered by forest. Lowland streams (below 1,600 m in elevation), located mostly in the Snake River Basin/High Desert ecoregion, displayed different fish assemblages than upland streams (above 2,000 m elevation) in the Northern Rockies, Middle Rockies, and Northern Basin and Range ecoregions. For example, cottids were not found in streams above 2,000 m in elevation. In addition, distinct fish assemblages were found in tributaries upstream and downstream from the large waterfall, Shoshone Falls, on the Snake River. Fish metrics explaining most of the variation among sites included the total number of species, number of native species, number of salmonid species, percent introduced species, percent cottids, and percent salmonids. Springs also exhibited different habitat conditions and fish assemblages than streams. The data suggest that the evolutionary consequences of geographic features and fish species introductions transcend the importance of ecoregion boundaries on fish distributions in the upper Snake River basin.

Idaho, Oregon, Washington, Wyoming↗

Reevaluating the age of the Walden Creek Group and the kinematic evolution of the western Blue Ridge, southern Appalachians

An integrated synthesis of existing datasets (detailed geologic mapping, geochronologic, paleontologic, geophysical) with new paleontologic and geochemical investigations of rocks previously interpreted as part of the Neoproterozoic Walden Creek Group in southeastern Tennessee suggest a necessary reevaluation of the kinematics and structural architecture of the Blue Ridge Foothills. The western Blue Ridge of Tennessee, North Carolina, and Georgia is composed of numerous northwest-directed early and late Paleozoic thrust sheets, which record pronounced variation in stratigraphic/structural architecture and timing of metamorphism. The detailed spatial, temporal, and kinematic relationships of these rocks have remained controversial. Two fault blocks that are structurally isolated between the Great Smoky and Miller Cove-Greenbrier thrust sheets, here designated the Maggies Mill and Citico thrust sheets, contain Late Ordovician-Devonian conodonts and stable isotope chemostratigraphic signatures consistent with a mid-Paleozoic age. Geochemical and paleontological analyses of Walden Creek Group rocks northwest and southeast of these two thrust sheets, however, are more consistent with a Late Neoproterozoic (550–545 Ma) depositional age. Consequently, the structural juxtaposition of mid-Paleozoic rocks within a demonstrably Neoproterozoic-Cambrian succession between the Great Smoky and Miller Cove-Greenbrier thrust sheets suggests that a simple foreland-propagating thrust sequence model is not applicable in the Blue Ridge Foothills. We propose that these younger rocks were deposited landward of the Ocoee Supergroup, and were subsequently plucked from the Great Smoky fault footwall as a horse, and breached through the Great Smoky thrust sheet during Alleghanian emplacement of that structure.

North Carolina, Tennessee↗

Crystalline-rock ejecta and shocked minerals of the Chesapeake Bay impact structure, USGS-NASA Langley core, Hampton, Virginia, with supplemental constraints on the age of impact

The USGS-NASA Langley corehole at Hampton , Va., was drilled 2000 as the first in a series of new coreholes drilled in the late Eocene Chesapeake Bay impact structure to gain a comprehensive understanding of its three-dimensional character. This understanding is important for assessing ground-water resources in the region, as well as for learning about marine impacts on Earth. We studied crystalline-rock ejecta and shock-metamorphosed minerals from the Langley core to determine what they reveal about the geology of crystalline rocks beneath the Atlantic Coastal Plain and how those rocks were affected by the impact . An unusual polymict diamicton, informally called the Exmore beds (upper Eocene), is 33.8 meters (m; 110.9 feet (ft)) thick and lies at a depth of 269.4 to 235.65 m (884.0 to 773.12 ft) in the core . This matrix-supported sedimentary deposit contains clasts of Tertiary and Cretaceous sediment (ranging up to boulder size) and sparse pebbles of crystalline rock . The matrix consists of muddy sand that contains abundant quartz grains and minor glauconite and potassium feldspar. Significantly, the sandy matrix of the Exmore beds contains sparse quartz grains (0.1 to 0.3 millimeter (0.004 to 0.012 inch) in diameter) that contain multiple sets of intersecting planar deformation features formerly referred to as shock lamellae. As many as five different sets have been observed in some quartz grains. Planar deformation features also occur in quartz grains in reworked crystalline-rock clasts in the Exmore beds. Such grains are clearly of shock-metamorphic origin. The presence of these features indicates that the quartz grains have experienced pressures greater than 6 gigapascals (GPa) and strain rates greater than 10 6 /second. Thus, the shock-metamorphosed quartz grains, although rare, provide clear and convincing evidence that the Exmore beds are of hybrid impact origin. Identification of shocked quartz grains in the Langley core adds to the number of sites in the structure where their presence is confirmed. Most of the clasts of crystalline rock that are in and just below the Exmore beds are rounded, detrital, and typical of coastal plain sediments. However, a few have angular shapes and consist of cataclastically deformed felsite having aphanitic-porphyritic to aphanitic texture and peraluminous rhyolite composition. Three of these clasts contain quartz grains that display two sets of planar deformation features of shock-metamorphic origin. Shock-metamorphosed quartz is an integral part of the cataclastic fabric in these three clasts, indicating that both the fabric and the shocked quartz were produced by the same high-energy impact event. Some felsite clasts have spherulitic textures that may be features either of an impact melt or of preimpact volcanic rocks. A weighted-mean total-fusion 40 Ar/ 39 Ar age of 35.3±0.1 Ma (±lσ) for 19 analyses of 4 North American tektites records the age of the late Eocene Chesapeake Bay impact event.

Chesapeake Bay↗

Cascadia Margin cold seeps: Subduction zone fluids, gas hydrates, and chemosynthetic habitats

Priority Geographic Area: The outer continental shelf and upper continental slope from Canada/U.S. border offshore Washington State to the Mendocino Fracture Zone (Northern California), entirely within the U.S. Exclusive Economic Zone (EEZ), from the outermost shelf to at least 2000 m water depth (Figure 1). Description of Priority Area: Since 2015, over a thousand water column gas plumes originating at seafloor gas seeps have been discovered landward of the Cascadia deformation front (e.g., Embley et al., 2016; Johnson et al., 2015, 2019; Merle and Embley, 2016; NA-95 Cruise Report, 2018; Riedel et al., 2018), adding to those that had long been known on Hydrate Ridge (e.g., Heeschen et al., 2003; Tréhu et al., 2004). The recently-discovered seeps stretch from offshore Vancouver Island to the Mendocino Fracture Zone and from the outer shelf to ~2000 m water depth, occurring both landward and seaward of the nominal limit for gas hydrate stability zone on the upper continental slope (Figure 1). Hundreds of seeps likely remain undiscovered. Water column imaging is incomplete both within the target geographic area and farther seaward, between the 2000 m isobath and the deformation front, which is the subject of an imaging study described in a white paper by Watt et al. The recently-discovered Cascadia Margin cold seeps partially overlap an important active margin gas hydrate province (Spence et al., 2001; Tréhu et al., 2003, 2004), as well as an area where sediments on the North American plate are folded and faulted and affected by fluids generated in the subduction complex beneath the Cascadia forearc (e.g., Saffer and Tobin, 2011). Several Ocean Drilling Program expeditions have focused on hydrate systems offshore Vancouver and Oregon (e.g., Riedel et al., 2009; Tréhu et al., 2004) and on the connection between the shallow and deep hydrogeologic systems. Cabled observatories now continuously monitor physical, chemical, and venting processes on south Hydrate Ridge (OOI; e.g., Philip et al., 2016a) and offshore Vancouver Island (NEPTUNE; e.g. Römer et al., 2016). Outside of these well-studied gas hydrate areas, a subset of the recently-discovered Cascadia seeps, including some that we visited with R/V Falkor in 2019 (e.g., https://schmidtocean.org/cruise/methane-seeps-at-edge-of-hydrate-stability/), also likely emit methane associated with shallow subseafloor gas hydrate systems. Other seeps are delivering not only methane, but also deep-derived gases (Baumberger et al., 2018, 2020) to the seafloor. Many Cascadia Margin seeps have also been recognized at water depths too shallow (e.g., 175 m) to be connected to gas hydrate dynamics. These seeps are postulated to be emitting gas and fluids that originated deep in accretionary wedge before migrating up normal faults generated during forearc extension associated with large earthquakes (Johnson et al., 2019). Only a small fraction of the recently discovered U.S. Cascadia Margin water column gas plumes has so far been verified by ROVs (Hercules from E/V Nautilus in 2016 and 2018; SuBastian from R/V Falkor in 2018 and 2019) to correspond to seafloor seeps. Careful scientific mapping, investigation, and sampling at the seeps have also been limited (e.g., Baumberger et al., 2018, 2020; Merle and Embley, 2016; Seabrook et al., 2018; Greinert et al. 2019). This white paper focuses on expanding exploration of already-identified U.S. Cascadia Margin cold seeps through a multipronged and multidisciplinary discovery program that could be accomplished with a variety of NOAA assets. The goals of the proposed exploration activities are to develop high-resolution maps of seep fields from deep ocean vehicles; to verify (and sample) seafloor gas emissions at the locations of water column plumes for compositional and isotopic studies; to map, sample, and conduct analyses on chemosynthetic communities and deep-sea coral habitats near seep sites to document species distributions and habitats as a function of depth and latitude along the margin; to collect seep geologic samples that can constrain the timing of methane emissions through geochronology; and to record environmental data (e.g., CTD) near the seafloor and in the water column above the seeps. Seafloor mapping using shipboard systems (multibeam/backscatter) would be needed to characterize seafloor features near seep sites. Water column imaging (EK60/80 and/or multibeam WCD data) conducted before and after seafloor explorations would capture active methane plumes and constrain temporal variations in seep emissions (e.g., Kannberg et al., 2013; Philip et al., 2016a, 2016b), which are known to vary on time scales as rapid as tidal cycles on this margin (e.g., Römer et al., 2016). What are the characterization and data needs in this area? Check all that apply: __x_ Biology, Geology, Physical Oceanography, Chemistry ___ Marine Archaeology ___ Other Provide a list or brief description of the data needed within this area, from your perspective: 1. Water column backscatter to image active gas plumes 2. High-resolution multibeam bathymetry, seafloor backscatter, and shallow sub-bottom imaging 3. Visual characterization and ground truthing of potential seeps, including high-resolution mapping and photography from near-seafloor vehicles; collection of seep-associated species, corals, sediments, authigenic carbonates, gases, and seawater Describe relevance to national security, conservation, and/or the economy: The Cascadia margin seeps provide significant ecosystem services, including habitat for commercially important fishes and support for diversity along the continental margin. Methane seeps are also biological hotspots for krill, plankton, and crustaceans, which in turn sustain higher trophic levels (e.g., whales). Methane-derived authigenic carbonates serve as a hard substrate for deep-sea corals and sponges on millennial time scales. The studies proposed here will elucidate the relationship among seep environments, deep-sea corals, sponges, fisheries, and other organisms and provide new insight into subduction zone and hydrate-associated fluids in this important seismogenic zone. The studies address fishery management concerns and inform future conservation of sensitive species (e.g., deep-sea corals) and benthic habitats. From your perspective, what makes this area unique? The Cascadia Margin seeps are a critical component of the leaky margin that stretches from Baja California to the Aleutian Arc along the Pacific coastline of North America. Cold seeps have been intensely studied on the Gulf of Mexico and U.S. Atlantic passive margins with a focus on chemosynthetic communities, deep-sea corals, and leakage of microbially-generated and/or thermogenic hydrocarbons; however, the recently-discovered Cascadia Margin seeps, as well as active margin seep systems in general, remain more poorly characterized. Such seeps not only contribute to the ocean carbon cycle (e.g., Pohlman et al., 2011), thereby fueling the base of the food chain in these settings, but also emit subduction zone fluids that provide clues about processes within the seismogenic zone and the accretionary complex. The Cascadia seeps area allows both biological (e.g., benthic habitats, coral distributions) and physical processes (e.g., generation of subduction zone fluids) to be studied along both depth (perpendicular to the deformation front) and latitudinal gradients.

California, Oregon, Washington↗

Effects of electrofishing gear type on spatial and temporal variability in fish community sampling

Fish community data collected from 24 major river basins between 1993 and 1998 as part of the U.S. Geological Survey's National Water-Quality Assessment Program were analyzed to assess multiple-reach (three consecutive reaches) and multiple-year (three consecutive years) variability in samples collected at a site. Variability was assessed using the coefficient of variation (CV; SD/mean) of species richness, the Jaccard index (JI), and the percent similarity index (PSI). Data were categorized by three electrofishing sample collection methods: backpack, towed barge, and boat. Overall, multiple-reach CV values were significantly lower than those for multiple years, whereas multiple-reach JI and PSI values were significantly greater than those for multiple years. Multiple-reach and multiple-year CV values did not vary significantly among electrofishing methods, although JI and PSI values were significantly greatest for backpack electrofishing across multiple reaches and multiple years. The absolute difference between mean species richness for multiple-reach samples and mean species richness for multiple-year samples was 0.8 species (9.5% of total species richness) for backpack samples, 1.7 species (10.1%) for towed-barge samples, and 4.5 species (24.4%) for boat-collected samples. Review of boat-collected fish samples indicated that representatives of four taxonomic families - Catostomidae, Centrarchidae, Cyprinidae, and Ictaluridae - were collected at all sites. Of these, catostomids exhibited greater interannual variability than centrarchids, cyprinids, or ictalurids. Caution should be exercised when combining boat-collected fish community data from different years because of relatively high interannual variability, which is primarily due to certain relatively mobile species. Such variability may obscure longer-term trends.

Transactions of the American Fisheries Society↗

Relation between selected water-quality variables and lake level in Upper Klamath and Agency Lakes, Oregon

Upper Klamath Lake is a large (140 square-mile), shallow (mean depth about 8 ft) lake in south-central Oregon that the historical record indicates has been eutrophic since its discovery by non-Native Americans. In recent decades, however, the lake has had annual occurrences of near- monoculture blooms of the blue-green alga Aphanizomenon flos-aquae. In 1988 two sucker species endemic to the lake, the Lost River sucker (Deltistes luxatus) and the shortnose sucker (Chasmistes brevirostris), were listed as endangered by the U.S. Fish and Wildlife Service, and it has been proposed that the poor water quality conditions associated with extremely long and productive blooms are contributing to the decline of those species. It has also been proposed that the low lake levels made possible by the construction of a dam at the outlet from the lake in 1921 have contributed to worsening water quality through a variety of possible mechanisms (Jacob Kann, Klamath Tribes, written commun., 1995). One such mechanism would be an increase in internal phosphorus loading from resuspended sediments (Jacoby and others, 1982), resulting from an increase in bottom shear stresses at lower lake levels (Laenen and LeTourneau, 1996), leading in turn to more intense algal blooms. Another possible mechanism is an earlier triggering of algal blooms. When early spring lake levels are low, greater light intensity at the sediment surface might speed recruitment of algal cells from the sediments. Sediment recruitment has been shown to be an important contributor to water column biomass increases in A. flos aquae (Barbiero and Kann, 1994) and Gloeotrichia echinulata (Barbiero, 1993). An earlier bloom could result in poor water quality conditions occurring earlier in the year, when young-of-the-year fish may be more susceptible to those conditions. Lake level can also influence water quality directly. An increased frequency of sediment resuspension at lower lake levels could increase chemical and biological oxygen demand, resulting in decreased dissolved oxygen concentrations. Sediment oxygen demand also may be enhanced at lower lake levels because it is concentrated over a smaller volume of water. Some compensation for increased oxygen demand at lower lake levels might be provided by increased reaeration, if the water column mixes from top to bottom more frequently. Based on the analysis of data that they have been collecting for several years, the Klamath Tribes recently recommended that the Bureau of Reclamation (Reclamation) modify the operating plan for the dam to make the minimum lake levels for the June-August period more closely resemble pre-dam conditions (Jacob Kann, written commun., 1995). The U.S. Geological Survey (USGS) was asked to analyze the available data for the lake and to assess whether the evidence exists to conclude that year-to-year differences in certain lake water-quality variables are related to year-to-year differences in lake level. The results of the analysis will be used as scientific input in the process of developing an operating plan for the Link River Dam.

Oregon↗

Peak discharge, flood frequency, and peak stage of floods on Big Cottonwood Creek at U.S. Highway 50 near Coaldale, Colorado, and Fountain Creek below U.S. Highway 24 in Colorado Springs, Colorado, 2016

The U.S. Geological Survey (USGS), in cooperation with the Colorado Department of Transportation, determined the peak discharge, annual exceedance probability (flood frequency), and peak stage of two floods that took place on Big Cottonwood Creek at U.S. Highway 50 near Coaldale, Colorado (hereafter referred to as “Big Cottonwood Creek site”), on August 23, 2016, and on Fountain Creek below U.S. Highway 24 in Colorado Springs, Colorado (hereafter referred to as “Fountain Creek site”), on August 29, 2016. A one-dimensional hydraulic model was used to estimate the peak discharge. To define the flood frequency of each flood, peak-streamflow regional-regression equations or statistical analyses of USGS streamgage records were used to estimate annual exceedance probability of the peak discharge. A survey of the high-water mark profile was used to determine the peak stage, and the limitations and accuracy of each component also are presented in this report. Collection and computation of flood data, such as peak discharge, annual exceedance probability, and peak stage at structures critical to Colorado’s infrastructure are an important addition to the flood data collected annually by the USGS. The peak discharge of the August 23, 2016, flood at the Big Cottonwood Creek site was 917 cubic feet per second (ft 3/s ) with a measurement quality of poor (uncertainty plus or minus 25 percent or greater). The peak discharge of the August 29, 2016, flood at the Fountain Creek site was 5,970 ft 3/s with a measurement quality of poor (uncertainty plus or minus 25 percent or greater). The August 23, 2016, flood at the Big Cottonwood Creek site had an annual exceedance probability of less than 0.01 (return period greater than the 100-year flood) and had an annual exceedance probability of greater than 0.005 (return period less than the 200-year flood). The August 23, 2016, flood event was caused by a precipitation event having an annual exceedance probability of 1.0 (return period of 1 year, or the 1-year storm), which is a statistically common (high probability) storm. The Big Cottonwood Creek site is downstream from the Hayden Pass Fire burn area, which dramatically altered the hydrology of the watershed and caused this statistically rare (low probability) flood from a statistically common (high probability) storm. The peak flood stage at the cross section closest to the U.S. Highway 50 culvert was 6,438.32 feet (ft) above the North American Datum of 1988 (NAVD 88). The August 29, 2016, flood at the Fountain Creek site had an estimated annual exceedance probability of 0.5505 (return period equal to the 1.8-year flood). The August 29, 2016, flood event was caused by a precipitation event having an annual exceedance probability of 1.0 (return period of 1 year, or the 1-year storm). The peak stage during this flood at the cross section closest to the U.S. Highway 24 bridge was 5,832.89 ft (NAVD 88). Slope-area indirect discharge measurements were carried out at the Big Cottonwood Creek and Fountain Creek sites to estimate peak discharge of the August 23, 2016, flood and August 29, 2016, flood, respectively. The USGS computer program Slope-Area Computation Graphical User Interface was used to compute the peak discharge by adding the surveyed cross sections with Manning roughness coefficient assignments to the high-water marks. The Manning roughness coefficients for each cross section were estimated in the field using the Cowan method.

Colorado↗

Single-pass versus two-pass boat electrofishing for characterizing river fish assemblages: Species richness estimates and sampling distance

Determining adequate sampling effort for characterizing fish assemblage structure in nonwadeable rivers remains a critical issue in river biomonitoring. Two-pass boat electrofishing data collected from 500-1,000-m-long river reaches as part of the U.S. Geological Survey's National Water-Quality Assessment (NAWQA) Program were analyzed to assess the efficacy of single-pass boat electrofishing. True fish species richness was estimated by use of a two-pass removal model and nonparametric jackknife estimation for 157 sampled reaches across the United States. Compared with estimates made with a relatively unbiased nonparametric estimator, estimates of true species richness based on the removal model may be biased, particularly when true species richness is greater than 10. Based on jackknife estimation, the mean percent of estimated true species richness collected in the first electrofishing pass (p??j,s1) for all 157 reaches was 65.5%. The effectiveness of single-pass boat electrofishing may be greatest when the expected species richness is relatively low (>10 species). The second pass produced additional species (1-13) in 89.2% of sampled reaches. Of these additional species, centrarchids were collected in 50.3% of reaches and cyprinids were collected in 45.9% of reaches. Examination of relations between channel width ratio (reach length divided by wetted channel width) and p??j,s1 values provided no clear recommendation for sampling distances based on channel width ratios. Increasing sampling effort through an extension of the sampled reach distance can increase the percent species richness obtained from single-pass boat electrofishing. When single-pass boat electrofishing is used to characterize fish assemblage structure, determination of the sampling distance should take into account such factors as species richness and patchiness, the presence of species with relatively low probabilities of detection, and human alterations to the channel.

Transactions of the American Fisheries Society↗

Rank of coal beds of the Narragansett basin, Massachusetts and Rhode Island

Coal of the Narragansett basin generally has been considered to be anthracite and/or meta-anthracite. However, no single reliable method has been used to distinguish these two ranks in this basin. Three methods — chemical, X-ray, and petrographic — have been used with some degree of success on coal of the Narragansett basin, but too often the results are in conflict. Chemical methods have been limited by inadequate sampling on a coal-bed-by-coal-bed basis and by a lack of analyses made according to (American Society for Testing and Materials, 1974) standard specifications. In addition, when corrections are made by using the Parr formulas, as required by the ASTM (1974) procedures, the generally high to very high ash content of coal from the Narragansett basin causes the fixed-carbon content to appear higher than it actually is. X-ray methods using the degree of graphitization as a measure of rank are not reliable because some of the graphite is related to shearing and brecciation associated with folding and faulting. Petrographic methods using reflectance on vitrinite give results that are generally consistent with results from chemical determinations. However, it is not clear whether the mean maximum reflectance or mean bireflectance is a better indicator of similar rank of such high-rank coals that have been structurally deformed. Coal from the Cranston Mine, RI, is probably meta-anthracite and coal from the Portsmouth Mine is probably anthracite. These ranks are based on chemical,X-ray, and petrographic data and are supported by associated metamorphic mineral assemblages that indicate that the Cranston Mine is in a higher metamorphic zone than the zone containing the Porthmouth Mine. Interpretation of the rank of Mansfield, MA, coal on the basis of extant chemical data is difficult because it is an impure coal with an ash content of 33 to 50%. Reflectance data indicate that the Mansfield, Foxborough, and Plainville coals in the northern part of the Narragansett basin are meta-anthracite but this is in disagreement with the rank suggested by the low degree of metamorphism of the associated rocks.

International Journal of Coal Geology↗