Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Near Surface Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

735 records · Page 8Linked to original sources
USGS2026

The United States Magnetotelluric Array and the National Impedance Map

The United States Magnetotelluric Array (USMTArray) data set, collected in the years 2006–2024, consists of more than 1,700 long-period magnetotelluric stations covering the entirety of the contiguous United States on a quasi-regular 70 km grid. Funding across multiple federal agencies was critical to sustaining this effort to its completion. Important components of the project included active guidance and participation from the MT community, the open and timely availability of all data, and the application of consistent instrumentation and robust data processing. Together with parallel advancement in the development of publicly available three-dimensional (3D) inversion codes, the USMTArray has revitalized the US magnetotelluric community and increased the visibility of magnetotellurics within the Earth-science community. Taken as a whole, these data are visualized as the National Impedance Map, which, together with a 3D synthesis conductivity model of the nation, reveals the electrical architecture of the contiguous US. USMTArray data are used by researchers worldwide for fundamental and applied studies, including investigations of continental architecture and evolution, estimation of hazards to critical infrastructure due to geomagnetic storms, and assessment of the nation's undiscovered geothermal and mineral resources. We here review the history and development of the project, discuss the challenges and successes in its execution, present the National Impedance Map and synthesis conductivity model, and highlight the breadth of research stemming from this rich data set.

conterminous United States↗
USGS2026

Corundum discovered by SuperCam and the Perseverance rover at Jezero crater, Mars

Mars is primarily composed of mafic mineral assemblages and their alteration products, but small, scattered rocks strewn across the landscape offer clues to greater petrological diversity. While traversing the Jezero crater rim, the Perseverance rover encountered several plagioclase-rich light-toned float rocks. SuperCam identified the distinctive signature of corundum (α-Al 2 O 3 ) in these rocks using time-resolved luminescence spectroscopy. Two strong peaks (692.7 and 694.1 nm) with millisecond lifetimes, and additional supporting lines, are consistent with Cr 3+ substitution for Al 3+ in corundum. Corundum forms in Al-rich, Si-depleted environments through magmatic or metamorphic processes. Given the rocks' small size, association with plagioclase, and location on the crater rim, we interpret the most plausible formation scenario to be impact induced metamorphism at the interface of a felsic and a mafic/ultramafic member with the likely action of fluids at some stage, although other possibilities are not excluded.

Geophysical Research Letters↗
USGS2026

Regional variations in sea ice and primary productivity in the Bering Sea during Marine Isotope Stage 11

Marine Isotope Stage (MIS) 11 (424-374 ka) has long been an analog for Holocene climate, because it is the most recent interglacial period with similar orbital conditions. However, there is significant global and regional variability in the climate response to MIS 11 warmth. Here, we review sediment core records from across the Bering Sea to investigate changes in paleoceanographic conditions during Marine Isotope Stages 12-10. Sea ice was present over much of the Bering Sea during MIS 11, but today, none of the sites investigated are ever ice-covered. This suggests that sea ice regimes in the Bering Sea during MIS 11 were different to those of the Holocene. There are also regional differences in the response of sea ice to MIS 11 warming. At the Umnak Plateau, Southeastern Bering Sea, sea ice concentrations decline during deglaciation, but they remain high at the slope sites until Peak MIS 11. Sea ice re-advances over the Umnak Plateau during peak interglacial warmth, at the same time that it declines over the slope sites. Late MIS 11 is characterized by high concentrations of seasonal sea ice at the Umnak Plateau, whilst sea ice at the slope sites fluctuates between consolidated and unconsolidated ice cover. This east-west dichotomy may be explained by changes in the behavior of the Aleutian Low. Productivity increases dramatically during deglaciation due to increased upwelling and sea level rise bringing fresh nutrients into the oceans. This is characterized by increased diatom productivity, increased terrestrial carbon deposition, and laminations at all sites.

Alaska↗
USGS2026

Hydrothermal manganese-oxide mineralization of a carbonate ooze, Samoan hotspot region, South Pacific Ocean

Low-temperature hydrothermal manganese oxides occur throughout the global oceans. However, the hydrothermal replacement of a carbonate ooze by manganese oxides is described here for the first time. The 24 samples dredged from three locations around the Territory of American Samoa in the South Pacific Ocean include six samples with remnant carbonate and volcaniclastic sediments, which we refer to as “low Mn,” and 18 samples in which the mineralization is pervasive and has replaced most original sediment, termed “high Mn.” The 18 high-Mn samples exhibit a mean Mn content of 51 wt.%. Higher Li and Mn contents and lower Fe contents in the high-Mn samples indicate a hydrothermal origin and distinguish these samples from hydrogenetic ferromanganese crusts. Mn-oxide layers are up to 90 mm thick, some with columns to 44 mm long and 10 mm wide, the magnitude of which has not been described previously. Samples are composed of birnessite and 10 Å phyllomanganate minerals. Textures of the thickest Mn layers indicate mineralization below the seabed from ascending fluids during multiple hydrothermal pulses. Mineralization took place by complete to partial replacement and cementation of foraminiferal sediments intermixed with volcaniclastic sediments in varying amounts. Our results highlight the production of carbonate sediment-hosted hydrothermal Mn oxides from multiple hydrothermal sources within the Samoan volcanic chain. The potential extensive distribution on the regional scale of this newly described mineralization process and unique element enrichments raise questions about its broader distribution globally and potential importance to hydrothermal processes, element mass balance, and seabed mineral resources.

Geochemistry, Geophysics, Geosystems↗
USGS2025

Speleothem evidence for Late Miocene extreme Arctic amplification – An analogue for near-future anthropogenic climate change?

The Miocene provides an excellent climatic analogue for near-future runaway anthropogenic warming, with atmospheric CO 2 concentrations and global average temperatures similar to those projected for the coming century under extreme-emissions scenarios. However, the magnitude of Miocene Arctic warming remains unclear due to the scarcity of reliable proxy data. Here we use stable oxygen isotope and trace element analyses, alongside clumped isotope and fluid inclusion palaeothermometry of speleothems to reconstruct palaeo-environmental conditions near the Siberian Arctic coast during the Tortonian (8.68 ± 0.09 Ma ). Stable oxygen isotope records suggest warmer-than-present temperatures. This is supported by temperature estimates based on clumped isotopes and fluid inclusions giving mean annual air temperatures between + 6.6 and + 11.1 °C , compared with − 12.3 °C today. Trace elements records reveal a highly seasonal hydrological environment. Our estimate of > 18 °C of Arctic warming supports the wider consensus of a warmer-than-present Miocene and provides a rare palaeo-analogue for future Arctic amplification under high-emissions scenarios. The reconstructed increase in mean surface temperature far exceeds temperatures projected in fully coupled global climate models, even under extreme-emissions scenarios. Given that climate models have consistently underestimated the extent of recent Arctic amplification, our proxy data suggest Arctic warming may exceed current projections.

Lena River delta↗
USGS2026

Geochemical disequilibrium at the brittle-ductile transition

We investigate the microtextural, microchemical, and isotopic effects of late-stage ductile deformation in quartzite mylonites and kyanite–muscovite–quartz veins from the Raft River shear zone (Utah). Quartz microstructures record pervasive disequilibrium, expressed by unannealed features including undulatory extinction, deformation lamellae, and poorly defined fabrics, typical of waning deformation in shear zones. Microchemical disequilibrium is best preserved in kyanite quartzites, where CL-zoned kyanite records repeated fractures, overgrowth, and mineral precipitation, and in muscovite from muscovite-poor quartzite mylonites that shows minor-element zoning consistent with syn-deformational overgrowth on detrital cores. In contrast, muscovite from muscovite-rich kyanite quartzites exhibits minimal chemical zoning. These microchemical variations correlate with 40 Ar/ 39 Ar age systematics. Chemically zoned muscovite preserves variable single-step ages, including ∼150 Ma ages, reflecting retention of detrital cores. In contrast, syndeformational muscovite consistently yields Miocene ages, indicating recrystallization and new growth below argon closure temperatures that reset inherited isotopic signatures. Similar trends are observed in quartzite mylonites, where increasing quartz recrystallization and stronger crystallographic preferred orientations occur toward deeper structural levels. Together, these observations indicate increasing retrograde deformation and recrystallization with depth in the Raft River shear zone and demonstrate that strain-driven recrystallization exerts a first-order control on muscovite ages. We suggest that apparent thermochronologic gradients in retrograde shear zones may reflect recrystallization gradients rather than temperature gradients. Where cooling limits the thermal driving force for recrystallization, isotopic relics are preserved, and local deformation and fluid availability control re-equilibration. Consequently, isotopic disequilibrium—particularly in the 40 Ar/ 39 Ar system—may be the rule rather than the exception of retrograde tectonic environments.

Idaho, Utah↗
USGS2025

Using subducting plate motion to constrain Cascadia slab geometry and interface strength

Subduction zones are home to multiple geohazards driven by the evolution of the regional tectonics, including earthquakes, volcanic eruptions and landslides. Past evolution builds the present-day structure of the margin, while the present-day configuration of the system determines the state-of-stress in which individual hazardous events manifest. Regional simulations of subduction zones provide a tool to synthesize the tectonic history of a region and investigate how geologic features lead to variations in the state of stress across the subduction system. However, it is challenging to design regional models that provide a force-balance that is consistent with the large-scale motion of surrounding tectonic plates while also not over-constraining the solution. Here, we present new models for the Cascadia subduction zone that meet these criteria and demonstrate how the motion of the subducting Juan de Fuca plate can be used to determine the along-strike variations in the viscous (long-term) coupling across the plate boundary. All successful models require lower viscous coupling in the northern section of the trench compared to the central and southern sections. However, due to uncertainties in the geometry of the Cascadia slab, we find that there is a trade-off between along-strike variation in viscous coupling and slab shape. Better constraints on the slab shape, and/or use of other observations are needed to resolve this trade-off. The approach presented here provides a framework for further exploring how geologic features in the overriding plate and the properties of the plate boundary region affect the state-of-stress across this and other subduction zones.

Cascadia subduction zone↗
USGS2024

Mesoproterozoic to Paleozoic tectonics, Pleistocene landforms, and Holocene seismicity in the Blue Ridge: Results from integrated studies of the 9 August 2020, Mw 5.1 earthquake area near Sparta, North Carolina, USA

This field trip examines the results of integrated geologic studies of the 9 August 2020, M w 5.1 earthquake near Sparta, North Carolina, USA. The earthquake generated ~4 km of coseismic surface rupture of the Little River fault and uplifted a surface area of ~11 km 2 . The Little River fault is a thrust fault oriented 110–130°/45–70°SW, and mapped fault segments are en echelon with scarp heights from <5–30 cm. The epicenter is in polydeformed rocks of the Ashe and Alligator Back Metamorphic Suites in the eastern Blue Ridge. Bedrock structure formed during multiple Paleozoic orogenies; the regional foliation strikes NE-SW and dips SE (mean orientation 063°/52°SE). Mapping identified late Paleozoic veins and shear zones, a regional joint set striking 330–340° and 250–240°, and brittle faults that cut the Paleozoic foliation. Brittle faults oriented similar to the Little River fault are mapped up to 4 km along strike from the coseismic rupture along Bledsoe Creek valley, and the combined length of the Little River fault system is ~8 km. Paleoseismic trenches across the Little River fault corroborate the reactivation of an older fault by the 2020 earthquake and reveal two events during late Pleistocene (<50 ka). Surficial mapping identified several terrace deposits, including a deposit along Bledsoe Creek that yielded a 26 Al/ 10 Be isochron burial age of 0.46 ± 0.13 Ma and overlies a brittle fault, thus constraining the timing of movement of the fault at that location. Paleoliquefaction studies document soft-sediment deformation features in alluvium that may represent paleoseismic events. Collectively, these results highlight long-lived paleoseismicity of the Blue Ridge and that the 9 August 2020 earthquake reactivated an older, suitably oriented brittle fault in the bedrock. The Little River fault is an example of a previously unknown but active fault lying outside of known seismic zones with demonstrated recurrence of paleo-ruptures, raising questions about the assumption that damaging earthquakes are limited to areas of ongoing background seismicity, which is counter to seismic hazard assessments in the eastern United States. Bedrock mapping separates eastern Blue Ridge lithostratigraphy of the Lynchburg Group and Ashe and Alligator Back Metamorphic Suites into separate fault-bound packages juxtaposed over various 1.3–1.0 Ga basement rocks of the northern French Broad massif by the Gossan Lead fault.

North Carolina↗
USGS2024

Mafic alkaline magmatism and rare earth element mineralization in the Mojave Desert, California: The Bobcat Hills connection to Mountain Pass

Occurrences of alkaline and carbonatite rocks with high concentrations of rare earth elements (REE) are a defining feature of Precambrian geology in the Mojave Desert of southeastern California. The most economically important occurrence is the carbonatite stock at Mountain Pass, which constitutes the largest REE deposit in the United States. A central scientific goal is to understand the genesis of the carbonatite ore body in the context of widespread REE-rich igneous activity. A swarm of mafic alkaline (shonkinite) dikes has been mapped and sampled at Bobcat Hills, 65 km southeast of the Mountain Pass mine. Whole-rock geochemistry and zircon geochronology demonstrate a clear affinity to the ca. 1.4 Ga Mountain Pass intrusive system. Bobcat Hills dikes have comparably high REE concentrations (La ∼1,000× chondritic) and an error-weighted mean 207 Pb/ 206 Pb zircon crystallization age of 1,426 ± 2 Ma (2 σ ). Unlike the alkaline intrusions at Mountain Pass, which have abundant inherited zircon from Paleoproterozoic basement rocks and crustally influenced oxygen isotope compositions (δ 18 O zircon = 6.5–7.5‰), the Bobcat Hills dikes lack any evidence of crustal assimilation and have oxygen isotope values that overlap a mantle range (Bobcat Hills average δ 18 O zircon = 5.6 ± 0.3‰). The dikes were a high-temperature, early center of mafic alkaline magmatism in the Mojave Desert that serve as a snapshot of melt generation from a spatially extensive, metasomatized mantle source. We propose that modification of the crust over many tens of Myr at Mountain Pass created an environment that favored crustal assimilation and enabled ascent of late-stage, REE-rich carbonatite magmas.

California↗
USGS2025

New paleomagnetic constraints on the eruption timing, stratigraphy, and post-emplacement deformation of the Picture Gorge Basalt within the Columbia River Basalt Group

The Picture Gorge Basalt (PGB) is part of the Miocene Columbia River Basalt Group (CRBG). The PGB, which outcrops in eastern Oregon, is considered coincident in time with the voluminous Grande Ronde Basalt. New radiometric ages have expanded the age‐range of the PGB, suggesting it began erupting prior to the Steens Basalt to its south and continued until after cessation of the Grande Ronde Basalt eruptions, an interval of 1.5 Ma. However, the existing paleomagnetism of the PGB implies this eruption timeline is an overestimate. To reconcile the radiometric and paleomagnetic timescales for the PGB, we conducted a paleomagnetic study on sections of the PGB to construct a detailed, high‐quality magnetostratigraphy. Our data indicate the stratigraphically lowest lava flows in the PGB are of reversed polarity, revealing a new paleomagnetic transition with the PGB and a reversed (R)–normal (N)–reversed (R) sequence. This suggests one of two timeline possibilities for PGB volcanism: (a) eruptions began and during through CRBG polarity chrons R0–N0–R1, penecontemporaneous with Steens Basalt, or (b) eruptions began and persisted during CRBG polarity chrons R1–N1–R2. Our work supports a longer interval of PGB volcanism than was suggested by previous paleomagnetic data but is at odds with the suggestion that PGB eruptions lasted through the entire main CRBG. We favor a scenario wherein PGB eruptions begin with R0 and continue into the R1 paleomagnetic interval. The paleomagnetic results also record a ∼18° vertical‐axis rotation of east‐central Oregon after ∼16 Ma with respect to stable North America.

Oregon↗
USGS2025

Identification of representative earthquakes for probabilistic tsunami hazard analysis (PTHA) using earthquake rupture forecasts and machine learning

As probabilistic tsunami hazard analysis (PTHA) focuses more on assessments for localized, populous regions, techniques are needed to identify a subsample of representative earthquake ruptures to make the computational requirements for producing high-resolution hazard maps tractable. Moreover, the greatest epistemic uncertainty in seismic PTHA is related to source characterization, which is often poorly defined and subjective. We address these two salient issues by applying streamlined earthquake rupture forecasts (ERFs), based on combinatorial optimization methods, to an unsupervised machine learning workflow for identifying representative ruptures. ERFs determine the optimal distribution of a millennia-scale sample of earthquakes by inverting the observed slip rate on major faults. We use two previously developed combinatorial optimization ERFs, integer programming and greedy sequential, to produce the optimal location of ruptures with seismic moments sampled from a regional Gutenberg–Richter magnitude–frequency distribution. These ruptures in turn are used to calculate peak nearshore tsunami amplitude, using computationally efficient tsunami Green's functions. An unsupervised machine learning workflow is then used to identify a small subsample of the earthquakes input to ERFs for onshore PTHA analysis. We eliminate epistemic uncertainty related to source distribution under traditional PTHA analysis; in its place, a quantifiable, less subjective and generally smaller uncertainty related to the input to ERFs is included. The Nankai subduction zone is used as a test case, where previous ERFs have been conducted. Results indicate that the locations of representative earthquakes are sensitive to choice of magnitude–area relation and to whether a minimum cumulative stress objective is imposed on the fault. In general, incorporating ERFs into PTHA provide a physically self-consistent method to incorporate fault slip information in determining representative earthquakes for onshore PTHA, eliminating a major source of epistemic uncertainty.

Nankai subduction zone↗
USGS2024

Conceptual hydrogeologic framework and groundwater budget near the southeastern part of Puget Sound, Washington

More than 1 million people live within the active model area (AMA) in the southeastern part of the lowlands surrounding Puget Sound, or Puget Lowland, Washington, and groundwater is the source for approximately one-half of their public, domestic, and irrigation water demands. The 887-square-mile AMA, located in King and Pierce Counties, represents the area of analysis for the conceptual hydrogeologic framework and numerical groundwater-flow models within the study area and includes the Puyallup River and Chambers-Clover Creek watersheds. To assess the potential hydrologic and anthropogenic impacts to groundwater and the connected surface-water resources, conceptual and numerical groundwater-flow models of groundwater flow were developed by the U.S. Geological Survey Washington Water Science Center in close cooperation with 18 water-resource agencies and stakeholders. This report presents information used to characterize the groundwater-flow system and the development of a numerical model in the AMA. Included are descriptions of the geology and conceptual hydrogeologic framework, groundwater levels and flow directions, groundwater recharge and discharge, numerical groundwater-flow model construction and results, and model limitations. The study area encompasses the western part of Pierce County and the southwestern part of King County, Washington. The study area extends south to the Nisqually River, southwest to Tanwax Creek, northeast to the Green River, and north through the valley near Auburn and adjacent uplands. It is bounded on the east by foothills of the Cascade Range, and on the northwest by Puget Sound.

Washington↗
USGS2025

The systematics of stable hydrogen (δ2H) and oxygen (δ18O) isotopes and tritium (3H) in the hydrothermal system of the Yellowstone Plateau volcanic field, USA

To improve our understanding of hydrothermal activity on the Yellowstone Plateau volcanic field, we collected and analyzed a large data set of δ 2 H, δ 18 O, and the 3 H concentrations of circum-neutral and alkaline waters. We find that (a) hot springs are fed by recharge throughout the volcanic plateau, likely focused through fractured, permeable tuff units. Previous work had stressed the need for light δ 2 H water recharge restricted to the northern part of the plateau or recharge during past cold periods. However, new data from the Y-7 drill hole suggests that recharge is not restricted to a certain area or a cold period. (b) δ 18 O values of thermal waters in the geyser basins are shifted from the global meteoric water line by temperature-dependent water-rock reactions with higher subsurface temperatures resulting in a greater shift. (c) Large temporal variations in the isotopic composition of meteoric water recharge and small temporal variability in the isotopic composition of hot spring discharge implies that the volume of groundwater in, and around the Yellowstone caldera is substantially larger than the volume of annual water recharge. (d) Hot springs discharged through different rhyolitic units correlate with identifiable differences in δ 2 H and δ 18 O compositions, 3 H concentrations, and water chemistry that imply equilibration at different temperatures and travel along different flow paths. (e) Based on measured 3 H concentrations, we calculate that hot spring waters in the central part of the geyser basins mostly contain <2% post-1950 meteoric water, whereas waters discharged at the basin margins contain larger fractions of post-1950s meteoric water.

Wyoming↗
USGS2025

Pre-eruptive characteristics of “suspect” silicic magmas in Carlin-type Au-forming systems

World-class Carlin-type Au deposits hosted in sedimentary rock were formed when profuse Eocene silicic magmatism swept across northern Nevada in response to arc migration. Carlin-type Au deposits formed along with porphyry/skarn Cu-Mo-W-Au deposits, epithermal Ag-Au deposits, and distal disseminated Ag-Au deposits. But unlike these other Au-bearing deposits that have clear associations with igneous intrusions, Carlin-type ore deposits appear to have formed distant from concealed plutons, and their origin remains controversial. Despite decades of abundant geophysical, geochronological, and geochemical studies suggesting the involvement of magmas, concrete evidence for magmatic involvement is still lacking. Consequently, the involvement of contemporaneous igneous systems remains inferred based on age, proximity, and variable isotopic, geochemical, and geophysical clues. A recent synthesis of deposit models postulates that Carlin-type Au deposits are intrusion-related, but that the causative magmas reside deeper (∼6–12 km) than in typical porphyry and peripheral systems (∼3–5 km), meaning that Carlin-type deposits are perhaps more distal expressions of igneous intrusions. We investigate a collection of “suspect” magmatic systems over a ∼7 m.y. timespan (∼41–34 Ma) that are contemporaneous with and near known Carlin-type ore deposits. We report results of a multifaceted array of in situ geochemical analyses (FTIR, EMP, SHRIMP-RG, LA-ICP-MS) of quartz-hosted melt inclusions, biotite, and quartz to better characterize the pre-eruptive characteristics of these magmas. We also report results of thermobarometry and thermodynamic phase equilibria modeling to help place constraints on magmatic reservoir depths and processes. Rather than a single “flavor” of silicic magma, we observe a surprisingly broad compositional spectrum of rhyolites, with one end of the spectrum exhibiting more arc-like (I-type) characteristics and the other end displaying more post-subduction, thick-crust extensional (A-type) characteristics. This broad compositional spectrum suggests a more complex picture of silicic crustal magmatism operating over a narrow span of time during slab rollback. Despite this spectrum, magmatic systems in this study are consistently ferroan and generally peraluminous, which we interpret as an expression of the relatively elevated geotherm at the time and incorporation of variable amounts of highly peraluminous metasedimentary crustal components. The silicic magma spectrum encompasses a range of mineralization associations, including subduction-related Cu-Mo-W-Au-Ag and post-subduction, thick-crust extensional rare-metal Mo-Sn-W-F-Be-Ag-Au, consistent with the prolific and diverse array of ore deposits that formed during this time. Carlin-type Au deposition appears to be associated with nearly the entire magmatic spectrum. This apparent indifference to silicic magma “flavor” would seem to imply that if magmas are involved in Carlin-type Au deposit genesis, they perhaps do not need to be compositionally specialized and/or possibly are only relevant as heat sources driving circulation to remobilize and redistribute metals.

Nevada↗
USGS2025

Refinements to the attenuated propagation of local earthquake shaking (APPLES) ground-motion-based earthquake early warning algorithm

We refined the Attenuated ProPagation of Local Earthquake Shaking (APPLES) ground-motion-based earthquake early warning (EEW) approach, and directly compare APPLES performance with that of the source-characterization-based U.S. ShakeAlert EEW system for a suite of historical earthquakes in the U.S. West Coast and Japan. APPLES is an extension of the Propagation of Local Undamped Motion (PLUM) algorithm in which observed shaking intensity at seismic stations is used to forward-predict intensity distributions to surrounding areas using an attenuation model derived from an intensity prediction equation. We test new configuration options within APPLES, such as using the second highest estimated ground motion rather than the maximum, to better match median ground-motion observations and reduce alerts for small magnitude earthquakes, both of which are key alerting priorities within ShakeAlert. We evaluate these configurations alongside ShakeAlert by comparing the ground-motion estimation accuracy and available warning times relative to station observations and ShakeMap distributions. Our preferred APPLES configuration produces accurate ground-motion estimates and corresponds better with median observations compared to ShakeAlert’s estimates. This preferred configuration substantially reduces alert issuance for M < 5.0 earthquakes compared to the previous APPLES configuration, and alert-release criteria can further restrict alerts to primarily M ≥ 5.5 earthquakes without requiring magnitude estimation. Prioritizing matching median-observed ground motions may reduce APPLES warning times compared to configurations that were tuned to avoid missed alerts (such as those that use the maximum estimated ground motions), which can lead to shorter warning times compared to ShakeAlert for the same alert threshold. However, station-based warning time assessments demonstrate that APPLES can outperform ShakeAlert for high target thresholds. APPLES is a simple, independent EEW approach that may improve the robustness of EEW for the West Coast of the U.S.

California, Oregon, Washington↗
USGS2024

Representation of surface-water flows using Gradient-Related Discharge in an Everglades Network

The Everglades Depth Estimation Network interpolates water-level gage data to produce daily water-level elevations for the Everglades in south Florida. These elevations were used to estimate flow vectors (gradients and directions) and volumetric flow rates using the Gradient-Related Discharge in an Everglades Network (GARDEN) application developed by the U.S. Geological Survey in cooperation with the U.S. Army Corps of Engineers. Flow rates in both the east-west and north-south directions were computed on a 400-meter square grid using modified parameters in the Manning’s equation. The frictional resistance parameter in the Manning’s equation was calibrated to measured flow rates at coastal creeks fed by Everglades Depth Estimation Network boundary flows. Levees and other features that act as barriers to flow were defined as “no-flow” grid cells where vectors were set to zero. The flow volume magnitudes were calibrated with 2020 daily values of coastal river flows, and verification was performed using 2021 data. Within a given day, the measured coastal river flows fluctuate more than the GARDEN boundary flows because of tidal and wind forcings. Because the GARDEN boundary flows were the upstream water source for the coastal rivers, calibration focused on matching average daily flow volumes rather than daily fluctuations. The Pearson’s correlation coefficient is 0.766 for the 2020 calibration period and 0.566 for the 2021 verification period. Applying GARDEN to periods with hydraulic-control-structure releases allows the propagation of structure flows to be seen in the daily flow-vector maps along with the multiday response of flows farther downgradient. Flow vectors may be overestimated near control structures because of difficulties in resolving the water gradient downstream from the structure. Flow vectors farther from the structure are more accurate than those near the structure.

Florida↗
USGS1989

An investigation of shallow ground-water quality near East Fork Poplar Creek, Oak Ridge, Tennessee

Alluvial soils and fill materials in and near the floodplain of East Fork Poplar Creek in Oak Ridge, Tennessee, are contaminated with various trace metals (primarily mercury), organic compounds, and radionuclides that were lost to the stream as a result of past operations at the Y-12 Plant, a nuclear-processing facility located within the U.S. Department of Energy’s Oak Ridge Reservation. Observation wells were installed in the shallow (above bedrock) aquifer in and near the floodplain of East Fork Poplar Creek and water-quality samples were collected to determine if contaminants found in the soils and fill are also present in the shallow ground water. The shallow aquifer in the East Fork Poplar Creek flood plain consists primarily of alluvial silt and clay with lesser amounts of sand and gravel. Thickness of the shallow aquifer ranges from essentially zero to as much as 20 feet. A silty-clay glei horizon is present between the base of the alluvium and the top of bedrock at most flood-plain locations and, where present, likely impedes downward ground-water movement. Water in the shallow aquifer near East Fork Poplar Creek occurs under water-table conditions. Recharge to the shallow aquifer is principally from precipitation, and discharge is through springs and seeps to East Fork Poplar Creek and its tributaries. During spring, summer; and fall, evapotranspiration also accounts for the removal of water in storage in the shallow aquifer. Water levels in the shallow aquifer fluctuate seasonally in response to variations in recharge and evapotranspiration. Generally, the depth to water in the observation wells ranged from about 1 to 4 feet below land surface in late winter, and from about 2 to 7 feet below land surface in late fall. During extremely dry periods, the water table recedes below the top of bedrock in some flood-plain areas, possibly causing East Fork Poplar Creek to lose water to the shallow aquifer along some reaches. Contaminants found in water samples collected from several of the observation wells in concentrations (total and (or) total-recoverable) which equaled or exceeded drinking-water standards established by the U.S. Environmental Protection Agency are antimony, chromium, lead, mercury, selenium, total phenols, and strontium-90. Total and dissolved uranium concentrations exceeded 1.0 microgram per liter in samples from nearly 70 percent of the wells in the East Fork Poplar Creek flood plain. Organic compounds that were identified in low concentrations in samples from a few wells in the flood plain are: Arochlor 1260, benzo(a)anthracene, benzo(b)fluoranthene, chrysene, 3,3-dichlorobenzidine, di-n-butylphthalate, N-nitrosodiphenylamine, and pyrene. Water from one well in the East Fork Poplar Creek flood plain at a contaminated fill site contained 37and 8 micrograms per liter of trichloroethene and trans-1,2-dichloroethene, respectively. Comparison of the results of total and (or) total-recoverable trace-metal determinations with those from dissolved determinations demonstrates that elevated concentrations of these substances in water collected from several of the wells in the East Fork Poplar Creek flood plain resulted from sorption of trace metals (and possibly organic compounds and radionuclides) by fine sediment suspended in the samples. The occurrence of contaminated sediment in these samples is suspected to be the result of borehole contamination during well installation.

Tennessee↗
USGS2026

Color-Shaded Relief Bathymetry of Lake Chelan, Washington

In 2023, the U.S. Geological Survey (USGS) completed a 3-week field operation in Lake Chelan, Washington, the third deepest lake in the conterminous United States, to acquire sediment cores, high-resolution bathymetry data, and chirp sub-bottom profiles. The high-resolution bathymetry displayed in this map publication was collected using a Norbit Winghead i67-curved array multibeam system; raw data were cleaned and gridded (3 by 3 meters [m]) in the Teledyne CARIS software. In some locations where the slopes of Lake Chelan are near-vertical, multibeam returns were sparse, resulting in artifacts resembling holes that appear as grey dots within the color-shaded bathymetric relief. Although the 2023 bathymetric mapping of Lake Chelan resulted in similar morphometric characteristics to previous hydrographic campaigns (table 1; Kendra and Singleton, 1987; Pelletier and others, 1989), these new data provide a much more detailed understanding of the two physiographic basins that comprise Lake Chelan: the deeper (as deep as 445.8 m [fig. 1]; previously reported as 453 m) and narrower (1–2 kilometers [km] wide) Lucerne Basin to the north, and the shallower (as deep as 127.8 m [fig. 1]), and wider (2–3 km wide) Wapato Basin to the south. With this detailed imaging of Lake Chelan, we find pervasive morphological evidence of slope failure and mass-transport deposits (MTDs) in at least 89 locations within the lake and 63 subaqueous deltas (fig. 2). The deeper Lucerne Basin is dominated by steep slopes and numerous subaqueous deltas fed by steep fluvial catchments, whereas the Wapato Basin contains numerous landslide scarps, scars, and debris aprons along the more gently sloping lake margins, and abundant relict kettle structures from the Pleistocene deglaciation. Lake Chelan’s geomorphic, geophysical, and sediment data contain important records of glacial retreat and advance, regional volcanic eruptions, and earthquakes that generate ground motions severe enough to induce landslides recorded in the sediment as MTDs. The epicenter of the 1872 Washington State Earthquake (M 6.5–7.2; Bakun and others, 2002; Brocher and others, 2017; Sherrod and others, 2021) is along the Spencer Canyon Fault, near the southern end of Lake Chelan. Shaking from this earthquake was strong enough to affect local aquifers, induce liquefaction of unconsolidated sediments, produce large seiches (Brocher and others, 2018), and likely cause landslides within Lake Chelan.

Washington↗