Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Environmental Science & Technology Letters”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

408 records · Page 8Linked to original sources
USGS2025

A newly identified creeping strand of the Concord fault, San Francisco Bay Area

The Concord fault constitutes a major branch of the Pacific–North America transform plate boundary in Northern California, bridging the strike‐slip Bartlett Springs ‐ Green Valley Fault system to the north with the Greenville and Calaveras Faults to the south. Like many faults in the San Francisco Bay Area its long‐term slip is partially accommodated by aseismic slip (creep). Although creep has been recognized and monitored on the northern half of the fault for decades, the precise location of the southern half of the fault and its slip rate—whether accommodated seismically or aseismically—has remained enigmatic. How slip transfers between the Concord and Greenville or Calaveras faults to the south remains an outstanding question. New field observations presented here indicate that the active trace of the fault south of downtown Concord is not where previously interpreted and is indeed actively creeping. We report observations of shallow creep continuing >7 km farther south along the Concord fault than previously reported, along a fault strand not previously recognized for most of its length. This is evident as right‐laterally deflected concrete curbs and sidewalk slabs on both sides of every street that crosses the fault at a high angle in southeast Concord and northeast Walnut Creek. We document the magnitude and location of these deflections to estimate accumulated right‐lateral aseismic slip expressed in engineered structures. Offsets of these piercing lines range from 8 to 18 cm, over widths varying from narrow breaks along centimeter‐scale concrete joints to 10‐m‐wide zones of deflection. Significantly, this active trace is ∼400 m west of where the Quaternary active trace has previously been inferred, placing it within—rather than bounding—the built area of suburban Concord. Slip along the fault has already caused infrastructure damage. These results revise our understanding of the southern Concord fault and help constrain its seismic potential.

California↗
USGS2025

SURF: An automated method for building nonplanar 3D fault models from earthquake hypocenters

Accurately characterizing 3D fault geometry is vital for improving our understanding of earthquake behavior and informing the development of seismic hazard models. Despite their importance, subsurface fault structures tend to be poorly constrained because of limitations in observational data. Improvements to the seismic networks and earthquake detection algorithms have increased the precision and volume of earthquake catalogs, which help illuminate detailed subsurface fault structure and provide the most direct information available about fault geometries at depth. We present a Python package to automate generating 3D fault geometries directly from hypocentral seismicity patterns. This method begins with clustering events based on their spatial density, identifying coherent patterns. Nearby clusters are then merged based on the similarity of their orientations. We fit nonplanar surfaces using support vector regression to balance surface accuracy with minimal deviations from planarity. The fault models are output as quadrilateral meshes at user‐defined resolution. In the process of generating the 3D fault surfaces, we compute the spatial density of seismicity around the surface and the planarity as quantitative metrics of the model outputs. As a proof of concept, we apply this approach to the San Andreas–Calaveras fault junction region and the 2019 Ridgecrest earthquake sequence, both in California, which contain complex subparallel faults well defined at the Earth’s surface and abundant microseismicity. These case studies demonstrate the method’s ability to model complex fault structures, including long continuous fault surfaces, crossing faults, variably dipping segments, and subparallel faults. We test the method on both standard network catalogs and double‐difference relocated catalogs. We find that our seismicity‐based fault model results align with published 3D models that incorporate additional constraints and interpretations ( Plesch et al. , 2020 ; Aagaard and Hirakawa, 2021 ). This workflow provides a low‐user‐input solution for estimating fault geometries at depth from earthquake catalogs.

California↗
USGS2025

Deterministic physics-based earthquake sequence simulators match empirical ground-motion models and enable extrapolation to data poor regimes: Application to multifault multimechanism ruptures

We use the deterministic earthquake simulator RSQSim to generate complex sequences of ruptures on fault systems used for hazard assessment. We show that the source motions combined with a wave propagation code create surface ground motions that fall within the range of epistemic uncertainties for the Next Generation Attenuation‐West2 set of empirical models. We show the model is well calibrated where there are good data constraints, and has good correspondence in regions with fewer data constraints. We show magnitude, distance, and mechanism dependence all arising naturally from the same underlying friction. The deterministic physics‐based approach provides an opportunity for better understanding the physical origins of ground motions. For example, we find that reduced stress drops in shallow layers relative to constant stress drop with depth lead to peak ground velocities in the near field that better match empirical models. The simulators may also provide better extrapolations into regimes that are poorly empirically constrained by data because physics, rather than surface shaking data parameterizations, is underlying the extrapolations. Having shown the model is credible, we apply it to a problem where observations are lacking. We examine the case of crustal faults above a shallow subduction interface seen to break coseismically in simulations of the New Zealand fault system. These types of events were left out of consideration in the most recent New Zealand national seismic hazard model due to the modeling complexity and lack of observational data to constrain ground‐motion models (GMMs). Here, we show that in the model, by breaking up the coseismic crustal and interface rupturing fault motions into two separate subevents, and then recombining the resulting ground‐motion measures in a square‐root‐of‐sum‐of‐squares incoherent manner, we reproduce well the ground‐motion measures from the full event rupture. This provides a new method for extrapolating GMMs to more complex multifault ruptures.

Seismological Research Letters↗
USGS2025

The GorDAS Distributed Acoustic Sensing experiment above the Cascadia locked zone and subducted Gorda Slab

The southernmost portion of the Cascadia Subduction zone in Northern California produces high rates of moderate and large earthquakes owing to subduction of the Gorda slab and deformation associated with the Mendocino Triple Junction. Distributed Acoustic Sensing (DAS) is rapidly advancing as a method for detecting earthquakes and imaging crustal structure. We have begun a long-term DAS monitoring experiment on buried telecom fiber in Arcata, California, with the goal of increasing the available recordings of moderate to large earthquakes as well as imaging seismogenic structures. We have recorded over a year's worth of data, including most aftershocks of the 2022 M w 6.4 Ferndale earthquake, though not the mainshock itself. The dataset includes numerous magnitude 3.5 and larger earthquakes including the 2023/01/01 M w 5.4 Rio Dell earthquake. Here we present initial results comparing an earthquake detection algorithm, run in real-time on the processing unit of the interrogator system, with both the ShakeAlert earthquake early warning system as well as a post-processed earthquake catalog developed with deep-learning phase-picker algorithms. The rapid onboard processing of the detector demonstrates the potential utility of DAS-based edge computing for earthquake early warning. We also verify the quality of the strain waveforms both in terms of peak amplitudes and waveform similarity using about five months of nodal seismometer data. These instruments were deployed roughly every 300 m along the ~15km long cable and validate large variations in peak strain over short distances that are seen in the DAS data. All data from time windows surrounding both the local and teleseismic earthquakes are publicly available, which will improve our understanding of both the performance of DAS systems in moderate earthquakes and earthquake hazards associated with the Gorda subduction zone.

California↗
USGS2026

A ground-motion model derived using a generalized mean rupture distance for large slab interface earthquakes

Source–station distance is a central input to ground‐motion models (GMMs) for predicting seismic shaking. GMM development uses distance metrics including the Joyner–Boore distance, which is the shortest distance from an observation point to the surface projection of the earthquake rupture, and R rup the shortest distance to the rupture in three dimensions. Thompson and Baltay (2018) proposed the generalized mean rupture distance R p to address observed near‐fault ground‐motion saturation. R p accounts for the contribution to the shaking of all parts of the rupture and provides a simple method for incorporating spatially variable slip. They used R p to develop a GMM for shallow crustal earthquakes, assuming uniform slip. Here, we investigate the improvement offered by an R p ‐based GMM for large subduction interface earthquakes by recalibrating the path term for a published GMM ( Parker et al. , 2022 ) using R p derived from distributed slip models (DSMs). Inspection of within‐event and total residuals indicates that the recalibrated model fits the data at least as well as an alternative in which the path term was recalibrated using R rup and the same dataset. Incorporating slip information in its entirety or trimming the DSM geometry is preferable to assuming uniform moment release on a prescribed model fault that extends beyond the actual ruptured area. R p tuned to minimize model uncertainty is closer to the maximum distance to rupture for peak ground velocity (PGV) than acceleration, possibly reflecting the contribution to high‐frequency shaking of slip on local asperities. However, when the moment is concentrated far from stations, PGV is fit adequately with R p closer to R rup ⁠ . Our results suggest incorporating slip‐derived moment release through R p could improve GMMs for slab interface events, especially if the implementation of R p ‐based models is refined using a larger dataset of earthquakes with greater geographic diversity to account for regional ground‐motion variations.

Seismological Research Letters↗
USGS2026

Ground-motion simulations for the 2024 Mw 4.8 Tewksbury, New Jersey, earthquake

Ground-motion simulations of notable earthquakes in the central and eastern United States are limited and typically assume one-dimensional (1D) Earth structure. In this study, we use a three-dimensional (3D) seismic velocity model to better constrain the depth and focal mechanism of the April 5th, 2024, moment magnitude 4.8 Tewksbury earthquake and investigate the spatial variability of earthquake ground motions and the effects of nearby sedimentary basins. We perform earthquake ground-motion simulations up to 0.5 Hz using the 3D spectral-element wave-propagation solver SPECFEM3D over a region 280-km wide by 260-km long by 77-km deep. Topography and subsurface geophysical structure are assigned using the U.S. Geological Survey National Crustal Model with a minimum shear-wave velocity of 200 m/s. We use earthquake time series from 13 broadband seismic stations in the region that have a uniform azimuthal distribution and epicentral distances ranging from 76 to 131 km to compare with synthetics and explore the effects of 1D versus 3D seismic structure on focal mechanism and depth solutions. Ground-motion intensity metrics are also presented relative to the NGA-East ground-motion models (GMMs) currently used in seismic hazard assessments for the region. We find that the 3D model, which reveals a wide spatial variability of period-dependent ground motions, yields better predictions of earthquake ground motions relative to the 1D model and the NGA-East ergodic ground-motion model, with 76 percent reduction of residual variance in observed ground motions averaged over 3-, 5-, 7-, and 10-second periods. Use of the 3D model to solve for a focal mechanism yields a shallower focal depth at 4 km and a shallower east-dipping focal plane relative to the U.S. Geological Survey regional moment tensor and Global Centroid Moment Tensor. Our study demonstrates that use of 3D seismic velocity models can improve estimates of earthquake focal mechanisms, ground motions, and seismic hazard.

New Jersey↗
USGS2024

Evidence for low effective stress within the crust of the subducted Gorda plate from the 2022 December Mw 6.4 Ferndale earthquake sequence

Stress levels on and adjacent to megathrust faults at seismogenic depths remain a key but difficult to constrain parameter for assessing seismic hazard in subduction zones. Although strong ground motions have been observed to be generated from distinct, high-stress regions on the downdip end of the megathrust rupture areas in many great earthquakes, we lack direct constraints on the stress level in the lower seismogenic portion of the Cascadia megathrust. On 2022 December 20, a M w 6.4 strike-slip earthquake occurred near Ferndale, California in southern Cascadia and likely ruptured the Gorda slab crust in the lower seismogenic portion, providing an opportunity to assess the stress level in this region. Here, we relocate the Ferndale mainshock and the first two weeks of aftershocks using a high-resolution 3-D velocity model and estimate rupture dimensions, directivity, and stress drop for several M w 4-5 aftershocks and recent earthquakes. The aftershocks define a strike-slip fault in the slab crust striking ENE, consistent with the mainshock focal mechanism. The orientation of this fault is about 45 ° off the ideally oriented fault plane given the stress state in the slab. The aftershock zone is extensive and broad in the forward direction of the mainshock rupture but still constrained within the volume of high Vp/Vs within the slab crust. Our stress drop estimates are generally lower for M w 4-5 earthquakes located within the slab crust compared to those a few km deeper in the slab mantle. Combined, our results support a relatively low effective stress level in the vicinity of the megathrust in the lower portion of the seismogenic zone in southern Cascadia, likely due to elevated fluid pressures. Consequently, the ground motion in the onshore region above this low-stress seismogenic portion in southern Cascadia may not be as intense as that observed during great earthquakes in other subduction zones.

California↗
USGS2026

Distributed faulting of the northern West Napa Fault Zone in Napa Valley, California

Mapped surface ruptures from the 24 August 2014 M w 6.0 South Napa earthquake in the Napa Valley, California, show a 2‐km‐wide zone of distributed faulting in the southern and central West Napa fault zone (WNFZ). In the northern WNFZ at Hendry Winery (HW), however, the mapped 2014 surface ruptures encompass an ∼100‐m‐wide zone, implying significant narrowing of the near‐surface fault zone to the north. We present a tomographic shear‐wave velocity ( ⁠⁠ V S ) model and guided‐wave data that indicate the northern WNFZ is at least 400‐m wide, with multiple near‐surface fault traces. Our V S model shows that the 2014 surface ruptures are underlain by discrete low‐velocity zones (LVZs), and coincident guided‐wave data show that the LVZs carry fault‐zone guided waves. If nearby (<500 m) mapped faults to the east of HW are part of the WNFZ, the entire WNFZ is more than 1 km wide in the northern Napa Valley. WNFZ guided waves travel up to 38% slower than S body waves, and low‐strain guided‐wave shaking is up to five times stronger than the associated body‐wave shaking. Our data suggest that guided waves, traveling along distributed faults, may result in an increased shaking hazard over a 1‐km‐wide area of the northern Napa Valley during future significant earthquakes. In places, the 2014 surface ruptures were difficult to find one year after the earthquake, and paleoseismic trenching showed only weak evidence for faulting, which may not have been identified in trenches if the locations of the 2014 surface ruptures had not been previously mapped ( Prentice et al. , 2015 ). Guided‐wave and V S tomography data, however, show strong evidence for faulting beneath the 2014 surface ruptures and at locations to the east. Although paleoseismic trenching is the gold standard for identifying near‐surface faulting, methods such as peak ground velocities of guided waves may better identify immature near‐surface fault traces.

California↗
USGS2024

Geologic input databases for the 2025 Puerto Rico – U.S. Virgin Islands National Seismic Hazard Model update: Crustal faults component

The last National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI) was published in 2003. In advance of the 2025 PRVI NSHM update, we created three geologic input databases to summarize new onshore and offshore fault source information in the northern Caribbean region between 62°–70° W and 16°–21° N. These databases, of fault sections, fault‐zone polygons, and geologic estimates of fault activity (fault‐slip rate and earthquake recurrence intervals) at specific sites, document updates to fault parameters used in prior seismic hazard models in PRVI. Fault sources were reviewed from published studies since 2003, which document substantial changes to the understanding of fault location, geometry, or activity. New fault section sources were added for features that meet the criteria of (1) length ≥7 km, (2) unequivocal evidence of recurrent tectonic Quaternary activity, and (3) documentation that is publicly available in a peer‐reviewed source. In addition, we revised several broad areal sources, such as the Mona and Anegada extensional zones. The 2003 model included three fault sections and two fault‐zone polygons (areal sources). These databases include 35 fault sections, 6 fault‐zone polygons, and 51 earthquake geology sites. To characterize fault activity rates, slip‐rate bins were assigned based on landscape expression and paleoseismic trench observations for faults without published slip‐rate sites. Additional fault sources were evaluated but not included in these databases due to a lack of published information about fault location, geometry, or recurrent Quaternary activity. The PRVI NSHM 2025 geologic input databases describe crustal faulting; the geometries and coupling of Puerto Rico subduction zone and Muertos Trough models are considered in a separate database. Updates to the fault sections, fault‐zone polygons, and earthquake geology databases can help inform the location and recurrence rate of damaging earthquakes in the PRVI NSHM implementation.

Puerto Rico, U.S. Virgin Islands↗
USGS2025

A review of abrupt permafrost thaw: Definitions, usage, and a proposed conceptual framework

Purpose of Review We review how ‘abrupt thaw’ has been used in published studies, compare these definitions to abrupt processes in other Earth science disciplines, and provide a definitive framework for how abrupt thaw should be used in the context of permafrost science. Recent Findings We address several aspects of permafrost systems necessary for abrupt thaw to occur and propose a framework for classifying permafrost processes as abrupt thaw in the future. Based on a literature review and our collective expertise, we propose that abrupt thaw refers to thaw processes that lead to a substantial persistent environmental change within a few decades. Abrupt thaw typically occurs in ice-rich permafrost but may be initiated in ice-poor permafrost by external factors such as hydrologic change (i.e., increased streamflow, soil moisture fluctuations, altered groundwater recharge) or wildfire. Summary Permafrost thaw alters greenhouse gas emissions, soil and vegetation properties, and hydrologic flow, threatening infrastructure and the cultures and livelihoods of northern communities. The term ‘abrupt thaw’ has emerged in scientific discourse over the past two decades to differentiate processes that rapidly impact large depths of permafrost, such as thermokarst, from more gradual, top-down thaw processes that impact centimeters of near-surface permafrost over years to decades. However, there has been no formal definition for abrupt thaw and its use in the scientific literature has varied considerably. Our standardized definition of abrupt thaw offers a path forward to better understand drivers and patterns of abrupt thaw and its consequences for global greenhouse gas budgets, impacts to infrastructure and land-use, and Arctic policy- and decision-making.

Current Climate Change Reports↗
USGS2026

Surface rupture and slip distribution of the 2025 Mw7.7 Mandalay earthquake and updated length scaling of supershear earthquakes

The 2025 M w 7.7 Mandalay, Burma (Myanmar), earthquake ruptured 475 km of the central Sagaing fault and is the longest continental strike-slip rupture on record. The observed rupture length is 1.6–4.7 times the value expected (100–300 km) from existing length-magnitude scaling relations for strike-slip earthquakes. The earthquake resulted from shallow dextral faulting and ruptured bilaterally with supershear speeds south of the epicenter, rupturing close to three major cities in Myanmar and exposing over six million people to violent or extreme shaking. We report on the surface rupture character, length, and slip distribution based on sub-pixel correlation of Sentinel-2 (10 m) and Planet Dove (3 m) optical images and visual analysis of SkySat and WorldView (0.3–0.5 m) optical images. The earthquake had moderate surface slip (average = 3.3 m, maximum = 5.6 m, 25–75% range = 3.0–4.0 m), narrow deformation zone width (1–10 pixels in sub-pixel correlation and up to 190 meters for the detailed surface rupture mapping), and simple fault geometry (no stepovers or large changes in strike, 87% of the rupture that was mapped in detail is single-stranded). We attribute the extreme length of the Mandalay earthquake to supershear rupture speed, simple fault geometry, narrow down-dip width, and moderate surface slip. Based on a compilation of 25 supershear strike-slip earthquakes ( M w 6.5–8.6; 1979–2025), we find that the rupture length of supershear earthquakes does not fit empirical scaling relationships for strike-slip earthquakes that predict length from magnitude. A length-magnitude scaling relationship based on supershear earthquakes has a best fit of log 10 (surface rupture length) = 0.89 M w – 4.44, indicating that supershear earthquakes tend to be longer than their subshear counterparts for any given magnitude and thus may expose a greater population to shaking.

Mandalay↗
USGS2025

Nanometer-scale relationships between sedimentary organic matter molecular composition, fluorescence, cathodoluminescence, and reflectance: The importance of oxygen content at low thermal maturities

Molecular characterization of sedimentary organic matter (SOM), termed macerals, is a common goal when seeking to understand petroleum generation as well as other geologic processes in deep time. However, unambiguous measurement of discrete macerals is challenging due to the small size of organic particles in sedimentary rocks, the proximity of different organic matter types to one another, mineral-organic matter interactions, and maceral mixing that occurs during SOM isolation prior to ex situ analysis. The recent advent of infrared spectrometers capable of nanometer-scale resolution and the application of these technologies to geologic samples has enabled advances in rapid, in situ molecular characterization of SOM allowing for insights into paleoenvironmental processes, such as organic matter productivity and preservation, among others. Here we employ one such technology, optical photothermal infrared (OPTIR) spectroscopy, to map SOM functional group distributions at 500-nm resolution in a sample from the Lower Cretaceous Sunniland Limestone of the South Florida Basin. Examined fields of view include occurrences of amorphous organic matter (AOM), inertinite, micrinite, solid bitumen, telalginite, and vitrinite. OPTIR data from these macerals are compared against traditional organic petrographic data from the same organic grains including fluorescence intensity and white light reflectance as well as against cathodoluminescence response, an emerging organic petrographic approach. Maceral oxygen content (using carbonyl functional group abundance as a proxy) is observed to vary widely between maceral types but correlates strongly with fluorescence and cathodoluminescence intensity as well as against reflectance. These findings highlight the important role that oxygen content plays in determining the optical properties of SOM and further demonstrate the ability of OPTIR to discriminate subtle molecular differences between SOM types.

Organic Geochemistry↗
USGS2025

The 3D National Topography Model Call for Action—Part 2: The Next Generation 3D Elevation Program

The three-dimensional (3D) National Topography Model initiative to integrate elevation and hydrography data includes the next generation of hydrography data from the 3D Hydrography Program and the next generation of elevation data from the 3D Elevation Program (3DEP). The first-ever collection of light detection and ranging (lidar) data for the nation (IfSAR for Alaska) provides a critical baseline reference, and the addition of multiple repeat elevation mapping projects as part of the next generation of 3DEP would substantially expand analysis capabilities. As the U.S. Geological Survey (USGS) is closing in on our goal of complete coverage with 3DEP data available or in progress for 98.3 percent of the Nation at the end of fiscal year 2024, the USGS is already transitioning to the next generation of 3DEP. Based on the 3D Nation Study results and input from a broad range of stakeholders, the USGS National Geospatial Program has finalized a new design for 3DEP that provides increased lidar quality levels and refresh rates. The new program is designed with more flexibility to meet changing user needs and take advantage of improvements in mapping technologies. The program will aim to expand the level of interagency coordination for topobathymetric lidar acquisition for inland rivers. The next generation of 3DEP will also aim to emphasize research, including advancing program design, products, and services and engaging and leveraging the evolving 3D industry. Research goals also include becoming more flexible in meeting user needs and taking advantage of evolving remote-sensing technologies. The program also plans to move from focusing on producing standard products to producing a concept of a 3D Nation Ecosystem with a variety of inputs, products, and services.

Circular↗
USGS2026

Assessment of groundwater quantity and quality contributions to Lake Huron

Lake Huron, one of the five Great Lakes, borders the United States and Canada, with Michigan as the only U.S. State on its shoreline. Like other freshwater lakes, it faces water-quality challenges from nutrients and chemicals applied across its drainage basin. Although past studies focused on surface-water sources, groundwater contributions remain less understood. To address this gap, the U.S. Geological Survey, as part of the Cooperative Science and Monitoring Initiative, classified drainage basins to Lake Huron into eight hydrogeologic zones based on bedrock rock type and glacial sediment transmissivity. Utilizing existing data and empirical field data, we quantified groundwater discharge and identified areas of concern for loading of chloride and nitrate to Lake Huron. Groundwater contributions, including indirect and shoreline discharge, ranged from 5.8 to 11.5 inches annually, totaling 1.9 cubic miles and 0.09 cubic mile, respectively. Hydrogeologic zones with higher glacial sediment transmissivity yielded greater indirect groundwater discharge. Chloride levels above the U.S. Environmental Protection Agency’s 250-mg/L recommendation were mainly in the Saginaw lowlands, whereas nitrate above the 10-mg/L standard was rare—found in only 11 wells. Together, the analysis of where groundwater discharge is occurring in the Lake Huron Basin and the identification of areas with potential groundwater-quality concerns can help prioritize areas that are critical to protecting the long-term health of Lake Huron.

Michigan↗
USGS2026

Coastal and Marine Hazards and Resources Program decadal science strategy 2020–2030

Overview The decadal science strategy of the Coastal and Marine Hazards and Resources Program (CMHRP) of the U.S. Geological Survey for 2020 to 2030 describes the CMHRP's vision and mission and the strategic framework needed to support key program goals: Conduct research and develop science-based tools that lead to safer, more productive coastal communities and improved stewardship of natural resources.

Circular↗
USGS2026

Nonstationary demographic state-space models using unreplicated counts for species undergoing environmental stressors

A fundamental task in ecological statistics is to estimate abundance and growth rate distributions from wildlife monitoring data to inform conservation management. Modeling time series of wildlife populations presents a number of challenges from both statistical and ecological perspectives, including discreteness; lack of replication; nonstationarity; and observation, demographic, and other phenomenological processes. Nonstationary dynamics are often exhibited by populations undergoing environmental stressors. Models must account for these characteristics to produce reliable estimates of abundance and trends, yet estimation can be challenging with unreplicated data. We propose nonstationary demographic state-space models using unreplicated counts for populations undergoing environmental stressors. A reduced growth rate model matches the complexity of the unreplicated count data, and a fecundity bound on growth rate distributions allows the separation of processes affecting growth rates like environmental stressors from those affecting abundance external to growth rates like migration. NDSSMs allow for the embedding of nonstationary model components, and we explore the use of changepoints, volatility clustering, and migration processes. We apply the proposed nonstationary models in case studies of herons affected by predator/competitor reestablishment and three bat species affected by a fungal pathogen causing white-nose syndrome. Nonstationary models outperform stationary models and generalized linear mixed effects models according to model scoring and visual inspection of predictions, and provide estimates more consistent with published values. Incorporating migration improves model fit universally, even with approximate one-way immigration, most likely because populations are extirpated, recolonized, and increase multiple-fold over the upper bound set by species fecundity. In addition, estimates of the timing and severity of the environmental stressor differed for models with migration. Including nonstationary and demographic components in a fecundity-bounded growth rate model improves inference and benefits interpretability of hyperparameters. In turn, this adjusts uncertainties in predictions of abundance and growth rates over time, providing the ingredients needed for informed conservation analysis and for directing future monitoring of at-risk species.

Journal of Agricultural, Biological and Environmen↗
USGS2025

Woods Hole Coastal and Marine Science Center—2023 annual report

The 2023 annual report of the U.S. Geological Survey Woods Hole Coastal and Marine Science Center highlights accomplishments of 2023, includes a list of 2023 publications, and summarizes the work of the center, as well as the work of each of its science groups. This product allows readers to gain a general understanding of the focus areas of the center’s scientific research and learn more about specific projects and progress made throughout 2023, all while enjoying photographs taken in various environments and laboratories, and applicable maps and figures.

Circular↗
USGS2026

Woods Hole Coastal and Marine Science Center—2024 annual report

The 2024 annual report of the U.S. Geological Survey Woods Hole Coastal and Marine Science Center highlights accomplishments of 2024, includes a list of 2024 publications, and summarizes the work of the center, as well as the work of each of its science groups. This product allows readers to gain a general understanding of the focus areas of the center’s scientific research and learn more about specific projects and progress made throughout 2024, all while enjoying photographs taken in various environments and laboratories, and applicable maps and figures.

Circular↗