Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Environment and Health”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8Linked to original sources
USGS1998

The environmental occurrence of herbicides: The importance of degradates in ground water

Numerous studies are being conducted to investigate the occurrence, fate, and effects on human health and the environment from the extensive worldwide use of herbicides to control weeds. Few studies, however, are considering the degradates of these herbicides in their investigations. Our study of herbicides in aquifers across Iowa found herbicide degradates to be prevalent in ground water, being detected in about 75% of the wells sampled. With the exception of atrazine, the frequencies of detection in ground water for a given herbicide increased multifold when its degradates were considered. Furthermore, a majority of the measured concentration for a given herbicide was in the form of its degradates—even for a relatively persistent compound such as atrazine. For this study, degradates comprised from 60 to over 99% of a herbicide's measured concentration. Because herbicide degradates can have similar acute and chronic toxicity as their parent compounds, these compounds have environmental significance as well as providing a more complete understanding of the fate and transport of a given herbicide. Thus, it is essential that degradates are included in any type of herbicide investigation.

Iowa↗
USGS2007

Biodegradation of PAHs and PCBs in soils and sludges

Results from a multi-year, pilot-scale land treatment project for PAHs and PCBs biodegradation were evaluated. A mathematical model, capable of describing sorption, sequestration, and biodegradation in soil/water systems, is applied to interpret the efficacy of a sequential active-passive biotreatment process of organic chemicals on remediation sites. To account for the recalcitrance of PAHs and PCBs in soils and sludges during long-term biotreatment, this model comprises a kinetic equation for organic chemical intraparticle sequestration process. Model responses were verified by comparison to measurements of biodegradation of PAHs and PCBs in land treatment units; a favorable match was found between them. Model simulations were performed to predict on-going biodegradation behavior of PAHs and PCBs in land treatment units. Simulation results indicate that complete biostabilization will be achieved when the concentration of reversibly sorbed chemical (S RA) reduces to undetectable levels, with a certain amount of irreversibly sequestrated residual chemical (S IA) remaining within the soil particle solid phase. The residual fraction (S IA) tends to lose its original chemical and biological activity, and hence, is much less available, toxic, and mobile than the "free" compounds. Therefore, little or no PAHs and PCBs will leach from the treatment site and constitutes no threat to human health or the environment. Biotreatment of PAHs and PCBs can be terminated accordingly. Results from the pilot-scale testing data and model calculations also suggest that a significant fraction (10-30%) of high-molecular-weight PAHs and PCBs could be sequestrated and become unavailable for biodegradation. Bioavailability (large K d , i.e., slow desorption rate) is the key factor limiting the PAHs degradation. However, both bioavailability and bioactivity (K in Monod kinetics, i.e., number of microbes, nutrients, and electron acceptor, etc.) regulate PCBs biodegradation. The sequential active-passive biotreatment can be a cost-effective approach for remediation of highly hydrophobic organic contaminants. The mathematical model proposed here would be useful in the design and operation of such organic chemical biodegradation processes on remediation sites. ?? 2007 Springer Science+Business Media B.V.

Water, Air, & Soil Pollution↗
USGS1987

Economics of the coal industry east of the Mississippi, 1973-1982

Government regulations on health, safety and environment have been poppular blamed for the declining productivity in U.S. coal mines since 1970. The stagnation in the coal industry east of the Mississippi is alleged to have been caused by this declining productivity and by the growth of cheaper and cleaner coal production west of the Mississippi. Economic evidence suggests, however, that productivity declines were more due to a relative lowering of labor costs in comparison with coal prices and due to work stoppages. The development of western coals fields was spurred by growth in local demand and had only a relatively small impact on coal production east of the Mississippi. Problems of the eastern coal industry are rooted mainly in slow economic growth in eastern U.S. which must be addressed in the long-term interests of the eastern coal industry.

International Journal of Coal Geology↗
USGS2011

Characterizing near-surface CO2 conditions before injection - Perspectives from a CCS project in the Illinois Basin, USA

The Midwest Geological Sequestration Consortium is conducting a large-scale carbon capture and storage (CCS) project in Decatur, Illinois, USA to demonstrate the ability of a deep saline formation to store one million tonnes of carbon dioxide (CO 2 ) from an ethanol facility. Beginning in early 2011, CO 2 will be injected at a rate of 1,000 tonnes/day for three years into the Mount Simon Sandstone at a depth of approximately 2,100 meters. An extensive Monitoring, Verification, and Accounting (MVA) program has been undertaken for the Illinois Basin Decatur Project (IBDP) and is focused on the 0.65 km2 project site. Goals include establishing baseline conditions to evaluate potential impacts from CO 2 injection, demonstrating that project activities are protective of human health and the environment, and providing an accurate accounting of stored CO 2 . MVA efforts are being conducted pre-, during, and post- CO 2 injection. Soil and net CO 2 flux monitoring has been conducted for more than one year to characterize near-surface CO 2 conditions. More than 2,200 soil CO 2 flux measurements have been manually collected from a network of 118 soil rings since June 2009. Three ring types have been evaluated to determine which type may be the most effective in detecting potential CO 2 leakage. Bare soil, shallow-depth rings were driven 8 cm into the ground and were prepared to minimize surface vegetation in and near the rings. Bare soil, deep-depth rings were prepared similarly, but were driven 46 cm. Natural-vegetation, shallow-depth rings were driven 8 cm and are most representative of typical vegetation conditions. Bare-soil, shallow-depth rings had the smallest observed mean flux (1.78 μmol m −2 s −1 ) versus natural-vegetation, shallow-depth rings (3.38 μmol m −2 s −1 ). Current data suggest bare ring types would be more sensitive to small CO 2 leak signatures than natural ring types because of higher signal to noise ratios. An eddy covariance (EC) system has been in use since June 2009. Baseline data from EC monitoring is being used to characterize pre-injection conditions, and may then be used to detect changes in net exchange CO 2 fluxes (Fc) that could be the result of CO 2 leakage into the near-surface environment during or following injection. When injection at IBDP begins, soil and net CO 2 monitoring efforts will have established a baseline of near-surface conditions that will be important to help demonstrate the effectiveness of storage activities.

Illinois↗
USGS2011

Applying monitoring, verification, and accounting techniques to a real-world, enhanced oil recovery operational CO2 leak

The use of carbon dioxide (CO 2 ) for enhanced oil recovery (EOR) is being tested for oil fields in the Illinois Basin, USA. While this technology has shown promise for improving oil production, it has raised some issues about the safety of CO 2 injection and storage. The Midwest Geological Sequestration Consortium (MGSC) organized a Monitoring, Verification, and Accounting (MVA) team to develop and deploy monitoring programs at three EOR sites in Illinois, Indiana, and Kentucky, USA. MVA goals include establishing baseline conditions to evaluate potential impacts from CO 2 injection, demonstrating that project activities are protective of human health and the environment, and providing an accurate accounting of stored CO 2 . This paper focuses on the use of MVA techniques in monitoring a small CO 2 leak from a supply line at an EOR facility under real-world conditions. The ability of shallow monitoring techniques to detect and quantify a CO 2 leak under real-world conditions has been largely unproven. In July of 2009, a leak in the pipe supplying pressurized CO 2 to an injection well was observed at an MGSC EOR site located in west-central Kentucky. Carbon dioxide was escaping from the supply pipe located approximately 1 m underground. The leak was discovered visually by site personnel and injection was halted immediately. At its largest extent, the hole created by the leak was approximately 1.9 m long by 1.7 m wide and 0.7 m deep in the land surface. This circumstance provided an excellent opportunity to evaluate the performance of several monitoring techniques including soil CO 2 flux measurements, portable infrared gas analysis, thermal infrared imagery, and aerial hyperspectral imagery. Valuable experience was gained during this effort. Lessons learned included determining (1) hyperspectral imagery was not effective in detecting this relatively small, short-term CO 2 leak, (2) even though injection was halted, the leak remained dynamic and presented a safety risk concern during monitoring activities and, (3) the atmospheric and soil monitoring techniques used were relatively cost-effective, easily and rapidly deployable, and required minimal manpower to set up and maintain for short-term assessments. However, characterization of CO 2 distribution near the land surface resulting from a dynamic leak with widely variable concentrations and fluxes was challenging.

Illinois, Indiana, and Kentucky↗
USGS2011

Risk management in a large-scale CO2 geosequestration pilot project, Illinois, USA

Like most large-scale infrastructure projects, carbon dioxide (CO 2) geological sequestration (GS) projects have multiple success criteria and multiple stakeholders. In this context "risk evaluation" encompasses multiple scales. Yet a risk management program aims to maximize the chance of project success by assessing, monitoring, minimizing all risks in a consistent framework. The 150,000-km2 Illinois Basin underlies much of the state of Illinois, USA, and parts of adjacent Kentucky and Indiana. Its potential for CO2 storage is first-rate among basins in North America, an impression that has been strengthened by early testing of the injection well of the Midwest Geological Sequestration Consortium's (MGSC's) Phase III large scale demonstration project, the Illinois Basin - Decatur Project (IBDP). The IBDP, funded by the U.S. Department of Energy's National Energy Technology Laboratory (NETL), represents a key trial of GS technologies and project-management techniques. Though risks are specific to each site and project, IBDP risk management methodologies provide valuable experience for future GS projects. IBDP views risk as the potential for negative impact to any of these five values: health and safety, environment, financial, advancing the viability and public acceptability of a GS industry, and research. Research goals include monitoring one million metric tonnes of injected CO2 in the subsurface. Risk management responds to the ways in which any values are at risk: for example, monitoring is designed to reduce uncertainties in parameter values that are important for research and system control, and is also designed to provide public assurance. Identified risks are the primary basis for risk-reduction measures: risks linked to uncertainty in geologic parameters guide further characterization work and guide simulations applied to performance evaluation. Formally, industry defines risk (more precisely risk criticality) as the product L*S, the Likelihood multiplied by the Severity of negative impact. L and S are each evaluated on five-point scales, yielding a theoretical spread in risk values of 1 through 25. So defined, these judgment-based values are categorical and ordinal - they do not represent physically measurable quantities, but are nonetheless useful for comparison and therefore decision support. The "risk entities" first evaluated are FEPs - conceptual Features, Events, and Processes based on the list published by Quintessa Ltd. After concrete scenarios are generated based on selected FEPs, scenarios become the critical entities whose associated risks are evaluated and tracked. In IBDP workshops, L and S values for 123 FEPs were generated through expert elicitation. About 30 experts in the project or in GS in general were assigned among six facilitated working groups, and each group was charged to envision risks within a sphere of project operations. Working groups covered FEPs with strong spatial characteristics - such as those related to the injection wellbore and simulated plume footprint - and "nonspatial" FEPs related to finance, regulations, legal, and stakeholder issues. Within these working groups, experts shared information, examined assumptions, refined and extended the FEP list, calibrated responses, and provided initial L and S values by consensus. Individual rankings were collected in a follow-up process via emailed spreadsheets. For each of L and S, three values were collected: Lower Bound, Best Guess, and Upper Bound. The Lower-Upper Bound ranges and the spreads among experts can be interpreted to yield rough confidence measures. Based on experts' responses, FEPs were ranked in terms of their L*S risk levels. FEP rankings were determined from individual (not consensus or averaged) results, thus no high-risk responses were damped out. The higher-risk FEPs were used to generate one or more concrete, well defined risk-bearing scenarios for each FEP. Any FEP scored by any expert as having associated risk of

Conference Paper↗
USGS2023

Photochemical mobilization of dissolved hydrocarbon oxidation products from petroleum contaminated soil into a shallow aquifer activate human nuclear receptors

Elevated non-volatile dissolved organic carbon (NVDOC) concentrations in groundwater monitoring wells under oil-contaminated hydrophobic soils originating from a pipeline rupture at the National Crude Oil Spill & Natural Attenuation Research Site near Bemidji, MN are documented.. We hypothesized the elevated NVDOC is comprised of water-soluble photooxidation products transported from the surface to the aquifer. We use field and laboratory samples in combination with complementary analytical methods to test this hypothesis and determine the biological response to these products. Observations from optical spectroscopy and ultrahigh-resolution mass spectrometry reveal a significant correlation between the chemical composition of NVDOC leached from photochemically weathered soils and groundwater monitoring wells with high NVDOC concentrations measured in the aquifer beneath the contaminated soil. Conversely, the chemical composition from the uncontaminated soil photoleachate, matches the NVDOC observed in the uncontaminated wells. Contaminated groundwater and photodissolution leachates from contaminated soil activated biological targets indicative of xenobiotic metabolism and exhibited potential for adverse effects. Newly formed hydrocarbon oxidation products (HOPs) from fresh oil could be distinguished from those downgradient. This study illustrates another pathway for dissolved HOPs to infiltrate groundwater and potentially affect human health and the environment.

Minnesota↗
USGS2018

A critical time for mercury science to inform global policy

Mercury is a global pollutant released into the biosphere by varied human activities including coal combustion, mining, artisanal gold mining, cement production, and chemical production. Once released to air, land and water, the addition of carbon atoms to mercury by bacteria results in the production of methylmercury, the toxic form that bioaccumulates in aquatic and terrestrial food chains resulting in elevated exposure to humans and wildlife. Global recognition of the mercury contamination problem has resulted in the Minamata Convention on Mercury, which came into force in 2017. The treaty aims to protect human health and the environment from human-generated releases of mercury curtailing its movement and transformations in the biosphere. Coincident with the treaty’s coming into force, the 13th International Conference of Mercury as a Global Pollutant (ICMGP-13) was held in Providence, Rhode Island USA. At ICMGP-13, cutting edge research was summarized and presented to address questions relating to global and regional sources and cycling of mercury, how that mercury is methylated, the effects of mercury exposure on humans and wildlife, and the science needed for successful implementation of the Minamata Convention. Human activities have the potential to enhance mercury methylation by remobilizing previously released mercury, and increasing methylation efficiency. This synthesis concluded that many of the most important factors influencing the fate and effects of mercury and its more toxic form, methylmercury, stem from environmental changes that are much broader in scope than mercury releases alone. Alterations of mercury cycling, methylmercury bioavailability and trophic transfer due to climate and land use changes remain critical uncertainties in effective implementation of the Minamata Convention. In the face of these uncertainties, important policy and management actions are needed over the short-term to support the control of mercury releases to land, water and air. These include adequate monitoring and communication on risk from exposure to various forms of inorganic mercury as well as methylmercury from fish and rice consumption. Successful management of global and local mercury pollution will require integration of mercury research and policy in a changing world.

Environmental Science & Technology↗
USGS2001

Occurrence of cyanazine compounds in groundwater: Degradates more prevalent than the parent compound

A recently developed analytical method using liquid chromatography/mass spectrometry was used to investigate the occurrence of cyanazine and its degradates cyanazine acid (CAC), cyanazine amide (CAM), deethylcyanazine (DEC), and deethylcyanazine acid (DCAC) in groundwater. This research represents some of the earliest data on the occurrence of cyanazine degradates in groundwater. Although cyanazine was infrequently detected in the 64 wells across Iowa sampled in 1999, cyanazine degradates were commonly found during this study. The most frequently detected cyanazine compound was DCAC (32.8%) followed by CAC (29.7%), CAM (17.2%), DEC (3.1%), and cyanazine (3.1%). The frequency of detection for cyanazine or one or more of its degradates (CYTOT) was more than 12-fold over that of cyanazine alone (39.1% for CYTOT versus 3.1% for cyanazine). Of the total measured concentration of cyanazine, only 0.2% was derived from its parent compound - with DCAC (74.1%) and CAC (18.4%) comprising 92.5% of this total. Thus, although DCAC and CAC had similar frequencies of detection, DCAC was generally present in higher concentrations. No concentrations of cyanazine compounds for this study exceeded water-quality criteria for the protection of human health. Only cyanazine, however, has such a criteria established. Nevertheless, because these cyanazine degradates are still chlorinated, they may have similar toxicity as their parent compound - similar to what has been found with the chlorinated degradates of atrazine. Thus, the results of this study documented that data on the degradates for cyanazine are critical for understanding its fate and transport in the hydrologic system. Furthermore, the prevalence of the chlorinated degradates of cyanazine found in groundwater suggests that to accurately determine the overall effect on human health and the environment from cyanazine its degradates should also be considered. In addition, because CYTOT was found in 57.6% of the samples collected from alluvial aquifers, about 2-5 times more frequently than the other major aquifer types (glacial drift, bedrock/karst, bedrock/nonkarst) under investigation, this finding has long-term implications for the occurrence of CYTOT in streams. It is anticipated that low-level concentrations of CYTOT will continue to be detected in streams for years after the use of cyanazine has terminated (scheduled for the year 2000 in the United States), primarily through its movement from groundwater into streams during base-flow conditions.

Iowa↗
USGS2002

Effects of sludge filtrate on the survival and reproduction of Ceriodaphnia dubia

The objective of this study was to determine if the runoff from croplands fertilized with municipal sludge was toxic to aquatic biota and, therefore, a potential threat to either public health or the environment. Seven-day bioassays with Ceriodaphnia dubia showed that the No-Observed-Effect-Concentration (NOEC) was 24 g/L and the Lowest-Observed-Effect-Concentration (LOEC) for survival was 30 g/L for soil samples treated with 35.2 metric tonnes (MT)/ha of municipal sludge. For soil samples treated with 0 and 17.6 MT/ha of sludge, the survival rates of C. dubia were not significantly affected at concentrations of 6-30 g/L of soil. Reproduction was suppressed by 25% when daphnids were exposed to 3.3 g/L concentration of soil treated with sludge at 35.2 MT/ha. A 50% suppression of reproduction occurred when daphnids were exposed to 15 g/L concentration of soil treated with sludge at 17.6MT/ha. A sludge application rate of 17.6MT/ha suppressed reproduction at a treatment concentration of 18g/L. These data indicate that the runoff from agricultural lands treated with municipal sludge has the potential to affect reproduction in daphnids and, therefore, the environment through the aquatic food chain.

Ecotoxicology↗
USGS2023

VogCast: A framework for modeling volcanic air pollution and its application to the 2022 eruption of Mauna Loa Volcano, Hawai'i

Volcanic activity and the associated gas emissions into the atmosphere often result in adverse air quality conditions and present a hazard to human health and the environment. Building on a decade-long effort to provide operational surface sulfur dioxide and sulfate aerosol forecasts for the State of Hawai'i, we present an air quality modeling framework called VogCast. VogCast is designed to simplify ensemble air quality prediction on a regional scale by linking together multiple state-of-the-art models of meteorology, emissions, and dispersion. The framework is open-source and introduces a new dynamic plume-rise algorithm for distributing pollutants vertically. Using radar and satellite data, we demonstrate that VogCast reasonably captured the mean injection height, the location, and the general envelope of the vog plume during Mauna Loa's 2022 eruption. The results suggest that during the 12-day eruption period model performance varied between days with trade and non-trade wind conditions. Our findings also highlight the importance of sulfur dioxide emission rate and vent parameter inputs for improving forecast accuracy. The broad goal of this work is to better our understanding of vog dispersion and improve air quality prediction for impacted communities.

Hawaii↗
USGS2026

Development of a SWAT+ model to improve conservation practice efficacy for protecting stream health in karst pasturelands

Placing appropriate conservation practices in critical source areas of pollutants can benefit stream health in karst environments susceptible to agricultural pollution. Watershed models, such as the Soil and Water Assessment Tool+ (SWAT+), can optimize both practice selection and placement across the landscape, but to our knowledge no studies have tested this model in karst pasturelands. Our goal was to understand pollutant dynamics in pasturelands with karst topography in southwest Virginia, United States. We built a SWAT+ model to predict streamflow and pollutant loads for four watersheds. SWAT+ predicted that streamflow estimates were most affected by setting the available water capacity to zero and increasing the hydraulic conductivity of the soil, revealing that water, and associated pollutants, move primarily through subsurface pathways. Predicted sediment yield was negatively associated with agricultural land cover and was strongly influenced by channel erodibility—indicating that the predominant sediment source may be streambanks. Therefore, practices that stabilize stream banks (e.g., fencing cattle out of streams) may be most effective at reducing sediment loads. The model unsatisfactorily predicted total nitrogen and total phosphorus loads. The utility of SWAT+ for cattle grazing operations in karst regions could be improved by more accurately representing the effects of cattle grazing on streambank erosion and the dynamic subsurface movement of pollutants.

Virginia↗
USGS2019

Examining the extraction efficiency of petroleum-derived dissolved organic matter in contaminated groundwater plumes

The extraction efficiency of petroleum-derived dissolved organic matter (DOM) was examined for groundwater samples from an aquifer contaminated with crude oil. Four different types of extraction were used to determine which method is best suited for the analysis of potentially toxic petroleum-derived DOM. The four types were a liquid-liquid extraction (LLE) with dichloromethane (EPA method 3510C), and three solid-phase extraction (SPE) stationary phases that are routinely used for extraction of polar analytes from water. For the LLE, that is selective for non-polar compounds, the extraction efficiency of petroleum-derived DOM decreased downgradient as the petroleum-derived DOM becomes increasingly polar due to biodegradation. In contrast, the average extraction efficiency by the SPE methods was greater than 65 % across the gradient. The results showed that SPE is more efficient for extracting petroleum-derived DOM at hydrocarbon-contaminated sites. The use of a method with greater extraction efficiency for partially-oxidized hydrocarbons may prove useful in determining relationships between their composition and structure and potential for risks to human health or the environment.

Ground Water Monitoring and Remediation↗
USGS2010

Prevention of infectious diseases in aquaculture

Infectious diseases remain one of the most important limitations to the successful propagation of aquatic animals. Most of the losses caused by pathogens in aquaculture could be prevented by health inspection, adequate environment and sound management practices. Effective control measures, mainly based upon 1) avoidance of pathogens 2) modification of the environment 3) improvement of host resistance 4) vaccination and 5) chemoprophylaxis are described.

Journal of Veterinary Medicine, Series B↗
USGS2018

Evaluating potential distribution of high-risk aquatic invasive species in the water garden and aquarium trade at a global scale based on current established populations

Aquatic non‐native invasive species are commonly traded in the worldwide water garden and aquarium markets, and some of these species pose major threats to the economy, the environment, and human health. Understanding the potential suitable habitat for these species at a global scale and at regional scales can inform risk assessments and predict future potential establishment. Typically, global habitat suitability models are fit for freshwater species with only climate variables, which provides little information about suitable terrestrial conditions for aquatic species. Remotely sensed data including topography and land cover data have the potential to improve our understanding of suitable habitat for aquatic species. In this study, we fit species distribution models using five different model algorithms for three non‐native aquatic invasive species with bioclimatic, topographic, and remotely sensed covariates to evaluate potential suitable habitat beyond simple climate matches. The species examined included a frog (Xenopus laevis), toad (Bombina orientalis), and snail (Pomacea spp.). Using a unique modeling approach for each species including background point selection based on known established populations resulted in robust ensemble habitat suitability models. All models for all species had test area under the receiver operating characteristic curve values greater than 0.70 and percent correctly classified values greater than 0.65. Importantly, we employed multivariate environmental similarity surface maps to evaluate potential extrapolation beyond observed conditions when applying models globally. These global models provide necessary forecasts of where these aquatic invasive species have the potential for establishment outside their native range, a key component in risk analyses.

Risk Analysis↗
USGS2026

Cyanobacteria Assessment Network: Pilot study with Sentinel-2 derived chlorophyll data

Harmful algal blooms (HABs) affect global water quality, limiting uses like recreation and consumption because of excessive algal biomass and toxin production. These blooms cause surface scums, taste and odor issues, hypoxia, and negative health and socioeconomic impacts. The US Army Corps of Engineers (USACE) manages over 400 lakes and reservoirs and seeks to improve monitoring of HABs through Sentinel-2 (S2) satellite imagery. The purpose of this project is to develop workflows for a national chlorophyll-a product with 20 m spatial resolution, enabling HAB monitoring for over 270,000 lakes and reservoirs. The 1-year pilot study established a federal partnership to conduct preliminary S2 processing steps, using datasets from Florida, Ohio, and Oregon. Key steps included in situ data aggregation, data assimilation, S2 algorithm evaluation, spatial and temporal compositing, satellite sensor cross-validation, and web hosting of an example prototype product. The study covers 29 USACE reservoirs, with cross-validation using Sentinel-3 (S3) data from 212 lakes. The multiagency initiative aligns with federal agency missions to protect health and the environment, supports acts like the 2017 Harmful Algal Bloom and Hypoxia Research and Control Act, and has annual potential avoided costs of $42 million.

contiguous United States↗
USGS2011

Geochemical database of feed coal and coal combustion products (CCPs) from five power plants in the United States

The principal mission of the U.S. Geological Survey (USGS) Energy Resources Program (ERP) is to (1) understand the processes critical to the formation, accumulation, occurrence, and alteration of geologically based energy resources; (2) conduct scientifically robust assessments of those resources; and (3) study the impacts of energy resource occurrence and (or) their production and use on both the environment and human health. The ERP promotes and supports research resulting in original, geology-based, non-biased energy information products for policy and decision makers, land and resource managers, other Federal and State agencies, the domestic energy industry, foreign governments, non-governmental groups, and academia. Investigations include research on the geology of oil, gas, and coal, and the impacts associated with energy resource occurrence, production, quality, and utilization. The ERP's focus on coal is to support investigations into current issues pertaining to coal production, beneficiation and (or) conversion, and the environmental impact of the coal combustion process and coal combustion products (CCPs). To accomplish these studies, the USGS combines its activities with other organizations to address domestic and international issues that relate to the development and use of energy resources.

Data Series↗
USGS2013

Challenge theme 5: Current and future needs of energy and mineral resources in the Borderlands and the effects of their development: Chapter 7 in United States-Mexican Borderlands: Facing tomorrow's challenges through USGS science

Exploration and extraction activities related to energy and mineral resources in the Borderlands—such as coal-fired power plants, offshore drilling, and mining—can create issues that have potentially major economic and environmental implications. Resource assessments and development projects, environmental studies, and other related evaluations help to understand some of these issues, such as power plant emissions and the erosion/denudation of abandoned mine lands. Information from predictive modeling, monitoring, and environmental assessments are necessary to understand the full effects of energy and mineral exploration, development, and utilization. The exploitation of these resources can negatively affect human health and the environment, its natural resources, and its ecological services (air, water, soil, recreation, wildlife, etc.). This chapter describes the major energy and mineral issues of the Borderlands and how geologic frameworks, integrated interdisciplinary (geobiologic) investigations, and other related studies can address the anticipated increases in demands on natural resources in the region.

United States-Mexico Borderlands↗