Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Engineering Structures”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8Linked to original sources
USGS1993

Estimation of flood volumes and simulation of flood hydrographs for ungaged small rural streams in Ohio

Methods are presented for estimating flood volumes and simulating flood hydrographs of rural streams in Ohio whose drainage areas are less than 6.5 square miles. The methods were developed to assist engineers in the design of hydraulic structures for which the temporary storage of water is a critical element of the design criteria. Examples of how to use the methods also are presented. Multiple-regression equations were developed to estimate maximum flood volumes of d-hour duration and T-year recurrence interval (dVT). Flood-volume data for all combinations of six durations (1, 2, 4, 8, 16, and 32 hours) and six recurrence intervals (2, 5, 10, 25, 50, and 100 years) were analyzed. The significant independent variables in the resulting 36 equations are drainage area, average annual precipitation, main-channel slope, and forested area. Standard errors of prediction for the 36 dVT equations range from +28 percent to +44 percent. A method is described for simulating flood hydrographs by applying a peak discharge and an estimated basin lagtime to a dimensionless hydrograph. Peak discharge may be estimated from equations in which drainage area, main-channel slope, and storage area are the significant explanatory variables, and average standard errors of prediction range from +33 to +41 percent. An equation is developed for estimating basin lagtime in which main-channel slope, forested area, and storage area are the significant explanatory variables, and the average standard error of prediction is +37 percent. A dimensionless hydrograph developed for use in Georgia was verified for use in Ohio. Step-by-step examples show how to (1) simulate flood hydrographs and compute their volumes, and (2) estimate volume-duration-frequency relations of small ungaged rural streams in Ohio. The volumes estimated by the two methods are compared. Both methods yield similar results for volume estimates of short duration, which are applicable to convective-type storm runoff. The volume-duration-frequency equations can be used to compute volume estimates of long and short duration because the equations are based on maximum-annual-volume data of long and short duration. The dimensionless-hydrograph method is based on flood hydrographs of average duration and cannot be used to compute volume estimates of long duration. Volume estimates of long duration may be considerably greater than volume estimates of short duration and are applicable to runoff from frontal-type storms.

Ohio↗
USGS2025

Long‐term effects of low‐drop grade control structures on channel evolution in the Yazoo River Basin

Channel incision is a widespread problem, especially in river basins that have an extensive history of channel alterations. Because channel incision causes large ecological and economic consequences, the prevention of continued migration of headcuts, defined as a steep change in stream gradient over a short reach, has been the focus of many stream engineering projects. Low-drop grade control structures (GCS) are a type of structure installed to halt the upstream movement of a headcut and were widely installed in the rivers and streams of the Yazoo River Basin in northern Mississippi. The goal of this study was to evaluate the long-term effects of these structures 30+ years post installation. To assess GCS effects on channel morphology, stream cross-section surveys were used to calculate Bank Height Ratio, Width-to-Depth Ratio, and Entrenchment Ratio, while point estimates made along each transect were used to calculate the average sediment size distribution for each of 30 sites. Analyses revealed that the GCS were successful in checking channel incision moving headward in the streams: sites upstream of the GCS were less incised and had greater accumulations of fine substrates compared to sites downstream and sites on streams lacking erosion control structures. Given the widespread use of GCS, these results can inform efforts aimed at managing channel incision.

Mississippi↗
USGS2012

Control-structure ratings on the Chicago Sanitary and Ship Canal near Lockport, Illinois

The U.S. Army Corps of Engineers and the Metropolitan Water Reclamation District of Greater Chicago regulate flows through control structures along the Lake Michigan lakefront and the Chicago Sanitary and Ship Canal (CSSC) for Lake Michigan diversion accounting, flood control, sanitary, and navigation purposes. This report documents the measurement and computation of flow through the Lockport Controlling Works (LCW) and the Lockport Powerhouse. This analysis aided in evaluation of the ratings at both structures, and the development of new ratings at the controlling works. The LCW structure consists of seven 30-feet (ft) wide sluice gates and is used to divert water from the CSSC and into the Des Plaines River. The flow regimes for the sluice gate included both free and submerged weir. Forty and 491 flow values from U.S. Geological Survey streamflow-gaging stations were used to develop equations describing free- and submerged-weir flow, respectively, through the sluice gates. The equations were developed for canal headwater elevations ranging from -7.0 to -10.5 ft Chicago City Datum (CCD), and tailwater (Des Plaines River at Lockport) to headwater (CSSC-LCW-Base) ratios ranging from 0.31 to 0.66. The Lockport Powerhouse structure consists of nine 9-ft wide by 14-ft high sluice gates and two 10-ft diameter turbines. Both tailwater and no-tailwater effect flow regimes occurred during nine measurements. Also, the canal headwater elevations ranged from -2.74 to -8.45 ft CCD, and the gates were configured six different ways during the measurements.

Illinois↗
USGS1953

Interpreting geologic maps for engineering purposes: Hollidaysburg quadrangle, Pennsylvania

This set of maps has been prepared to show the kinds of information, useful to engineers, that can be derived from ordinary geologic maps. A few additional bits of information, drawn from other sources, are mentioned below. Some of the uses of such maps are well known; they are indispensable tools in the modern search for oil or ore deposits; they are the first essential step in unraveling the story of the earth we live on. Less well known, perhaps, is the fact that topographic and geologic maps contain many of the basic data needed for planning any engineering construction job, big or little. Any structure built by man must fit into the topographic and geologic environment shown on such maps. Moreover, most if not all construction jobs must be based on knowledge of the soils and waters, which also are intimately related to this same environment. The topographic map shows the shape of the land the hills and valleys, the streams and swamps, the man-made features such as roads, railroads, and towns. The geologic map shows the kinds and shapes of the rock bodies that form the land surface and that lie beneath it. These are the facts around which the engineer must build.

Pennsylvania↗
USGS2020

Breeding birds of the upper Mississippi River floodplain forest: One community in a changing forest, 1994 to 1997

Floodplain forest on the upper Mississippi River (UMR), a unique habitat in the Midwest that is important for many bird species, has been reduced and is undergoing continued reduction and changes in structure and species diversity because of river engineering and invasive species. Hydrological changes are causing tree diversity to decline favoring Acer saccharinum (silver maple) and Fraxinus pennsylvanica (green ash). Invasive Phalaris arundinacea (reed canary grass, Phalaris ) threatens tree regeneration, and recent Agrilus planipennis (emerald ash borer) arrival threatens to decimate the important ash component of the forest canopy. During the 1990s, virtually no information was available about breeding songbird species and abundances on the UMR floodplain forest from along many river miles and a broad range of forest situations (for example, mainland, island, edge, interior). From 1994 to 1997, we surveyed breeding birds and sampled vegetation at 391 random points on UMR floodplain forest along a latitudinal gradient from Red Wing, Minnesota, to Clinton, Iowa, to characterize bird assemblages and associations with gradients in forest structure at survey points (local scale) and land cover composition within a 200-meter radius of survey points (landscape scale). Eighty-six bird species were detected during the study, but 28 species comprised 90 percent of all detections. Species that are typically associated with woodland edge or are tolerant of fragmentation were the most common: Setophaga ruticilla (American Redstart), Troglodytes aedon (House Wren), Turdus migratorius (American Robin), Quiscalus quiscula (Common Grackle), and Vireo gilvus (Warbling Vireo). Species typically associated with large forest patches— Setophaga cerulea (Cerulean Warbler), Hylocichla mustelina (Wood Thrush), and Dryocopus pileatus (Pileated Woodpecker)—were rare. Principal components analyses consistently described local habitat gradients related to canopy cover and Phalaris presence and described landscape gradients related to forest area and areas of open land cover types. However, nonmetric multidimensional scaling revealed no pattern in bird assemblages. Canonical correspondence analyses with local habitat variables for each year revealed that bird assemblages were affected by canopy cover, the presence of Phalaris , and the number of tree species. Four bird species were consistently associated with Phalaris presence or negatively with canopy cover, and no species were associated with the number of tree species variable. Although landscape variables were significantly related to the bird assemblage in canonical correspondence analyses, no bird species were consistently related to any landscape variable. These results indicate that there is one assemblage of forest birds on the UMR composed mainly of edge-tolerant species. Species associated with lower canopy cover and Phalaris presence may be favored to increase in abundance as canopy cover opens as trees die and Phalaris becomes more prevalent.

Illinois, Iowa, Minnesota, Wisconsin↗
USGS2014

Pros and cons of rotating ground motion records to fault-normal/parallel directions for response history analysis of buildings

According to the regulatory building codes in the United States (e.g., 2010 California Building Code), at least two horizontal ground motion components are required for three-dimensional (3D) response history analysis (RHA) of building structures. For sites within 5 km of an active fault, these records should be rotated to fault-normal/fault-parallel (FN/FP) directions, and two RHAs should be performed separately (when FN and then FP are aligned with the transverse direction of the structural axes). It is assumed that this approach will lead to two sets of responses that envelope the range of possible responses over all nonredundant rotation angles. This assumption is examined here, for the first time, using a 3D computer model of a six-story reinforced-concrete instrumented building subjected to an ensemble of bidirectional near-fault ground motions. Peak values of engineering demand parameters (EDPs) were computed for rotation angles ranging from 0 through 180° to quantify the difference between peak values of EDPs over all rotation angles and those due to FN/FP direction rotated motions. It is demonstrated that rotating ground motions to FN/FP directions (1) does not always lead to the maximum responses over all angles, (2) does not always envelope the range of possible responses, and (3) does not provide maximum responses for all EDPs simultaneously even if it provides a maximum response for a specific EDP.

Journal of Structural Engineering↗
USGS2015

Geologic Cross Section I–I′ Through the Appalachian Basin from the Eastern Margin of the Illinois Basin, Jefferson County, Kentucky, to the Valley and Ridge Province, Scott County, Virginia

Geologic cross section I‒I’ is the fourth in a series of cross sections constructed by the U.S. Geological Survey to document and improve understanding of the geologic framework and petroleum systems of the Appalachian basin. Cross section I‒I’ provides a regional view of the structural and stratigraphic framework of the Appalachian basin from the eastern margin of the Illinois basin in central Kentucky, across the Cincinnati arch (Lexington dome), to the Valley and Ridge province in southwestern Virginia, a distance of approximately 280 miles. This cross section is a companion to cross sections E‒E’ , D‒D’ , and C‒C’ that are located about 200 to 300 miles to the northeast. Cross section I‒I’ either updates or complements earlier geologic cross sections through the central Kentucky and southwestern Virginia part of the Appalachian basin. Although other published cross sections through parts of the basin show more structural and stratigraphic detail, these other cross sections are of more limited extent geographically and (or) stratigraphically. Cross section I‒I ’ contains much information that is useful for evaluating energy resources in the Appalachian basin. Many of the key elements of the Appalachian basin petroleum systems (such as source rocks, reservoir rocks, seals, and traps) can be inferred from lithologic units, unconformities, and geologic structures shown on the cross section. Other aspects of petroleum systems (such as the timing of petroleum generation and petroleum migration pathways) may be evaluated by burial history, thermal history, and fluid flow models on the basis of what is shown on the cross section. Cross section I‒I’ also provides a stratigraphic and structural framework for the Pennsylvanian coal-bearing section. In addition, geologists and engineers could use cross section I‒I’ as a reconnaissance tool to identify plausible geologic structures and strata for the subsurface storage of liquid waste or for the sequestration of carbon dioxide.

Kentucky, Pensylvania↗
USGS2021

Multi-period response spectra

Multi-period response spectra (MPRS) are incorporated in the development of seismic design ground motions in the 2020 edition of the NEHRP Recommended Seismic Provisions for New Buildings and Other Structures (2020 NEHRP Provisions) and are approved for adoption in the American Society of Civil Engineers (ASCE) Standard, Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE/SEI 7-22). MPRS are incorporated in these design regulations because it was discovered that the standard spectral shape based on two periods and one reference site class was substantially understating spectral response in moderately long period structures located on soft soil sites where ground motion hazard is dominated by large magnitude events. These are the motions that are relevant to tall buildings in the Los Angeles region and of interest to the Los Angeles Tall Buildings Seismic Design Council (LATBSDC). The MPRS incorporation updated Chapters 11, 20, 21, and 22 of the 2020 NEHRP Provisions (a.k.a. FEMA P-2082); changes are described in detail in the commentary of FEMA P-2082. The MPRS also influenced the development of the 2018 U.S. Geological Survey (USGS) National Seismic Hazard Model (NSHM) for the conterminous U.S. because valid ground motion models for all periods and site classes of interest were required. FEMA P-2082 is complemented by the FEMA P-2078 technical report that provides a procedure for approximating MPRS outside of the conterminous U.S. This paper presents a condensed version of the relevant sections of FEMA P-2082 and FEMA P-2078 that would interest the LATBSDC.

Conference Paper↗
USGS2016

Use of structured decision-making to explicitly incorporate environmental process understanding in management of coastal restoration projects: Case study on barrier islands of the northern Gulf of Mexico

Coastal ecosystem management typically relies on subjective interpretation of scientific understanding, with limited methods for explicitly incorporating process knowledge into decisions that must meet multiple, potentially competing stakeholder objectives. Conversely, the scientific community lacks methods for identifying which advancements in system understanding would have the highest value to decision-makers. A case in point is barrier island restoration, where decision-makers lack tools to objectively use system understanding to determine how to optimally use limited contingency funds when project construction in this dynamic environment does not proceed as expected. In this study, collaborative structured decision-making (SDM) was evaluated as an approach to incorporate process understanding into mid-construction decisions and to identify priority gaps in knowledge from a management perspective. The focus was a barrier island restoration project at Ship Island, Mississippi, where sand will be used to close an extensive breach that currently divides the island. SDM was used to estimate damage that may occur during construction, and guide repair decisions within the confines of limited availability of sand and funding to minimize adverse impacts to project objectives. Sand was identified as more limiting than funds, and unrepaired major breaching would negatively impact objectives. Repairing minor damage immediately was determined to be generally more cost effective (depending on the longshore extent) than risking more damage to a weakened project. Key gaps in process-understanding relative to project management were identified as the relationship of island width to breach formation; the amounts of sand lost during breaching, lowering, or narrowing of the berm; the potential for minor breaches to self-heal versus developing into a major breach; and the relationship between upstream nourishment and resiliency of the berm to storms. This application is a prototype for using structured decision-making in support of engineering projects in dynamic environments where mid-construction decisions may arise; highlights uncertainty about barrier island physical processes that limit the ability to make robust decisions; and demonstrates the potential for direct incorporation of process-based models in a formal adaptive management decision framework.

Mississippi↗
USGS1995

Saving lives through better design standards

Over the past 30 years, scientists have put together a more complete picture of how the ground shakes during earthquakes. They have learned that shaking near the source of earthquakes is far more severe than once thought and that soft ground shakes more strongly than hard rock.This knowledge has enabled engineers to improve design standards so that structures arebetter able to survive strong earthquakes. When the 1989 Loma Prieta earthquake struck, 42 people tragically lost their lives in the collapse of a half-mile-long section of the Cypress structure, an elevated double-decker freeway in Oakland, California.Yet adjacent parts of this structure withstood the magnitude 6.9 temblor—why? The part that collapsed was built on man-made fill over soft mud, whereas adjacent sections stood on older, firmer sand and gravel deposits. Following the collapse, scientists set out instruments in the area to record the earthquake's many strong aftershocks. These instruments showed that the softer ground shook more forcefully than the firmer material-even twice as violently

California↗
USGS1995

Population modeling and its role in toxicological studies

A model could be defined as any abstraction from reality that is used to provide some insight into the real system. In this discussion, we will use a more specific definition that a model is a set of rules or assumptions, expressed as mathematical equations, that describe how animals survive and reproduce, including the external factors that affect these characteristics. A model simplifies a system, retaining essential components while eliminating parts that are not of interest. ecology has a rich history of using models to gain insight into populations, often borrowing both model structures and analysis methods from demographers and engineers. Much of the development of the models has been a consequence of mathematicians and physicists seeing simple analogies between their models and patterns in natural systems. Consequently, one major application of ecological modeling has been to emphasize the analysis of dynamics of often complex models to provide insight into theoretical aspects of ecology. 1

Book chapter↗
USGS1969

Theoretical basis of the borehole deepening method of absolute stress measurement

Knowledge of the initial state of stress in rocks provides a key to the solution of many problems in rock mechanics. The initial state of stress is part of the basic data required for rational design of structures in rock, since its redistribution when engineering activities are conducted is a primary load on the rock portion of the engineering system. Knowledge of initial and subsequent changes in the state of stress is also relevant in the study of active faults and crustal strain. The purposes of stress measurements are not generally well served by methods which disclose only one of the stress components at a point. Recently, interest has centered on overcoring methods which though expensive and difficult have the important advantage of yielding data on three or more stress components. In a previous paper, the authors introduced a new method--termed borehole deepening--based on measurement of the deformations that occur close to the bottom of a borehole when it is deepened by further drilling without overcoring . The proposed method is at a disadvantage when compared with overcoring procedures in that the quantities to be measured are somewhat smaller and the measuring environment is more hostile. However, the borehole deepening method presents three distinct advantages in comparison with overcoring procedures: (1) Using the same borehole, both the initial and the subsequent changes in the state of stress can be obtained by borehole deepening. Stress changes with time are very significant for stability monitoring as well as in predicting earthquake activity in regions close to known active faults and volcanoes. (2) The necessity of completely unloading a portion of the rock mass where deformation measurements are being carried out in the overcoring methods is ill-suited to nonlinearly elastic materials such as rocks. The borehole deepening method, on the other hand, is based on a change of stress from one level to another, rather than complete strain relief and is therefore less affected by nonlinear behavior. (3) Numerous stress measurements can be carried out economically in a single borehole. Thus, the regional stress distribution can be more readily obtained. Such information is considerably more significant than a single stress measurement at a point; considering the variability of rock masses and the magnitudes and direction of the stresses acting on them from one region to another and within the regions themselves, the reliability of a single measurement when extrapolated for the entire region is not very reasonable. This advantage of more numerous measurements makes it possible to predetermine the initial state of stress with confidence before actual access and construction. It also makes it possible to consider studying regional tectonic systems. Integrated regional measurements of in-situ state of stress would provide the necessary information for plotting the variation of crustal stresses; this would be of great interest in evaluating the several theories of orogenesis and in delineating tectonically active regions. This chapter is concerned with the theoretical basis for the borehole deepening method--the "software" for converting deformation measurements into stress values.

Conference Paper↗
USGS1975

Earthquake shaking and damage to buildings

Ground shaking close to the causative fault of an earthquake is more intense than it was previously believed to be. This raises the possibility that large numbers of buildings and other structures are not sufficiently resistant for the intense levels of shaking that can occur close to the fault. Many structures were built before earthquake codes were adopted; others were built according to codes formulated when less was known about the intensity of near-fault shaking. Although many building types are more resistant than conventional design analyses imply, the margin of safety is difficult to quantify. Many modern structures, such as freeways, have not been subjected to and tested by near-fault shaking in major earthquakes (magnitude 7 or greater). Damage patterns in recent moderate-sized earthquakes occurring in or adjacent to urbanized areas, however, indicate that many structures, including some modern ones designed to meet earthquake code requirements, cannot withstand the severe shaking that can occur close to a fault. It is necessary to review the ground motion assumed and the methods utilized in the design of important existing structures and, if necessary, to strengthen or modify the use of structures that are found to be weak. New structures situated close to active faults should be designed on the basis of ground motion estimates greater than those used in the past. The ultimate balance between risk of earthquake losses and cost for both remedial strengthening and improved earthquake-resistant construction must be decided by the public. Scientists and engineers must inform the public about earthquake shaking and its effect on structures. The exposure to damage from seismic shaking is steadily increasing because of continuing urbanization and the increasing complexity of lifeline systems, such as power, water, transportation, and communication systems. In the near future we should expect additional painful examples of the damage potential of moderate-sized earthquakes in urban areas. Over a longer time span, however, we can significantly reduce the risk to life and property from seismic shaking through better land utilization, improved building codes and construction practices, and at least the gradual replacement of poor buildings by more resistant buildings. Progress toward reducing risk from seismic shaking through better building design is slowed by deficiencies in our knowledge about the nature of damaging ground motion and the failure mechanisms in structures. For example, lacking observational data, seismologists must rely on simplified theoretical and numerical models of the earthquake process to estimate near-fault ground motion, especially for earthquakes as large as magnitude 7 and 8. Because such models have not been adequately tested against data, their reliability is unknown. Engineers lack detailed information about failure processes in structures during an earthquake. Although many structures have been instrumented to measure their response to an earthquake, few records have been obtained from buildings that actually sustained significant structural damage and few structures are properly instrumented to measure all the modes of deformation that are likely to contribute to failure. Moreover, the fact that many structures have withstood ground motion more intense than that assumed in their design indicates that conventional methods of design do not take into account important contributions to earthquake resistance by nonstructural elements and by the ability of structural elements to deform inelastically without necessarily causing failure of the structure. It is fortunate when such reserve resistance exists, but better understanding of the sources of reserve strength is needed to determine how large a margin of safety they confer and how they might be affected by changes in construction practices and materials with time. In the next few years we look forward to significant advances in knowledge and to more effective application of what is already known, largely because of substantial funding of research related to seismic engineering by the National Science Foundation . The increasing number of strong-motion seismographs operating in seismically active regions will likely provide for the first time a number of records of damaging levels of ground motion. Significant effort is being directed toward obtaining near-fault records, although many probable sites of future large earthquakes remain inadequately instrumented, especially outside the conterminous United States. New and more complete information on building response and damage mechanisms will be obtained by improved instrumentation of structures and through laboratory investigations of failure in structures and structural elements. Further developments in computer technology and in computer modeling techniques will permit more realistic simulations of the seismic response of soils and structures that take into account their inelastic behavior and their strain-dependent properties. Earthquake design codes will continually be revised to better utilize existing knowledge concerning the nature of strong ground motion and the dynamic behavior of buildings during earthquakes and to incorporate new knowledge and also experiences gained from future earthquakes. We believe that application of new knowledge, improvements in earthquake-resistant design and construction, and remedial strengthening or replacement of weak existing structures can significantly reduce our current level of exposure to earthquake hazards.

Science↗
USGS2002

GPS in pioneering dynamic monitoring of long-period structures

Global Positioning System (GPS) technology with 10-20-Hz sampling rates allows scientifically justified dynamic measurements of relative displacements of long-period structures. The displacement response of a simulated tall building in real time and permanent deployment of GPS units at the roof of a building are described. To the authors' best knowledge, this is the first permanent deployment of GPS units (in the world) for continuous dynamic monitoring of a tall building. Data recorded from the building during a windy day is analyzed to determine the structural characteristics. When recorded during extreme motions caused by earthquakes and strong winds, such measurements can be used to compute average drift ratios and changes in dynamic characteristics, and therefore can be used by engineers and building owners or managers to assess the structural integrity and performance by establishing pre-established thresholds. Such information can be used to secure public safety and/or take steps to improve the performance of the building.

Earthquake Spectra↗
USGS2006

Common clay and shale

At present, 150 companies produce common clay and shale in 41 US states. According to the United States Geological Survey (USGS), domestic production in 2005 reached 24.8 Mt valued at $176 million. In decreasing order by tonnage, the leading producer states include North Carolina, Texas, Alabama, Georgia and Ohio. For the whole year, residential and commercial building construction remained the major market for common clay and shale products such as brick, drain tile, lightweight aggregate, quarry tile and structural tile.

Mining Engineering↗
USGS1990

Geotechnical engineering for ocean waste disposal. An introduction

As members of multidisciplinary teams, geotechnical engineers apply quantitative knowledge about the behavior of earth materials toward designing systems for disposing of wastes in the oceans and monitoring waste disposal sites. In dredge material disposal, geotechnical engineers assist in selecting disposal equipment, predict stable characteristics of dredge mounds, design mound caps, and predict erodibility of the material. In canister disposal, geotechnical engineers assist in specifying canister configurations, predict penetration depths into the seafloor, and predict and monitor canister performance following emplacement. With sewage outfalls, geotechnical engineers design foundation and anchor elements, estimate scour potential around the outfalls, and determine the stability of deposits made up of discharged material. With landfills, geotechnical engineers evaluate the stability and erodibility of margins and estimate settlement and cracking of the landfill mass. Geotechnical engineers also consider the influence that pollutants have on the engineering behavior of marine sediment and the extent to which changes in behavior affect the performance of structures founded on the sediment. In each of these roles, careful application of geotechnical engineering principles can contribute toward more efficient and environmentally safe waste disposal operations.

Conference Paper↗
USGS2024

Prefabricated Zero Ascend Omnispecies (ZAO) modular fish passage modules using advanced manufacturing techniques

The Zero Ascend Omnispecies (ZAO) fish passage attraction module “ZAO Attractor” is a novel system designed to facilitate upstream passage for a broad spectrum of fish species, with a particular focus on American shad and river herring (alewife and/or blueback herring). Combining the use of prefabricated, modular components with advanced manufacturing, the ZAO aims to provide a cost-effective and scalable solution for fish passage attractions across various hydropower sites. The system features a surface level entry, so fish do not need to climb. In addition, it is designed to be adjusted and repositioned to create the most effective attraction flows by managing the outflows from hydropower turbines. Budget Period 1 (BP1) focused on the design and modeling of the ZAO Attractor and demonstrated the engineering feasibility of a modular, prefabricated, hydrodynamically efficient structure with surface level entry and passage. During BP1, the hypothesis was that certain structural adaptations, such as the addition of long fins, could direct turbine outflows to create a desirable downstream flow. Simulations, however, were inconclusive, revealing the complex nature of fish preferences for hydraulic conditions. It was discovered that there were limited published studies on the direct correlation between quantified flow patterns and fish attraction, emphasizing the need for controlled studies to observe and measure these effects. In Budget Period 2 (BP2), controlled studies with live fish were prioritized to address these complexities. A partially scaled ZAO Attractor was evaluated in laboratory conditions using native river water to assess its capability to attract and guide fish. Despite challenges with flume flow conditions and the impact of flume dimensions on flow directionality and velocity, the studies provided insights into fish behavior and preferences, particularly the requirement for a consistent flow stream for migration cues. Adjustments to the fin structure demonstrated potential effectiveness in guiding fish toward the module. However, the hydraulic conditions within the flume environment did not accurately reflect typical in-river scenarios, therefore the results were inconclusive with respect to the optimal system configuration for in-river use. In the future, conducting comprehensive field studies can enhance understanding of the interactions between fish behavior and flow conditions created by the ZAO Attractor. Additionally, a design review is advised, particularly regarding the load scenarios throughout the seasons and positioning of the ZAO Attractor. These studies should continue to refine the design to achieve its intended benefits: economical and effective fish attraction and passage that can be adapted to specific site conditions while allowing for continued energy generation at sites up for re-licensure and adding hydropower generation to previously untapped resources in non-powered dams and new stream reaches. In conclusion, the ZAO fish passage attraction module presents a promising approach to fish passage at hydropower stations, with the potential to balance environmental concerns with renewable energy development. However, further field validation and optimization are necessary to ensure its effectiveness and practicality in real-world applications.

Final Technical Report↗
USGS2015

NGA-West 2 GMPE average site coefficients for use in earthquake-resistant design

Site coefficients corresponding to those in tables 11.4–1 and 11.4–2 of Minimum Design Loads for Buildings and Other Structures published by the American Society of Civil Engineers (Standard ASCE/SEI 7-10) are derived from four of the Next Generation Attenuation West2 (NGA-W2) Ground-Motion Prediction Equations (GMPEs). The resulting coefficients are compared with those derived by other researchers and those derived from the NGA-West1 database. The derivation of the NGA-W2 average site coefficients provides a simple procedure to update site coefficients with each update in the Maximum Considered Earthquake Response MCER maps. The simple procedure yields average site coefficients consistent with those derived for site-specific design purposes. The NGA-W2 GMPEs provide simple scale factors to reduce conservatism in current simplified design procedures.

Open-File Report↗