Geology ReportsSearch

SEARCH · Geology Reports

Results for “California Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8Linked to original sources

Pacific coastal and marine science of the U.S. Geological Survey in Santa Cruz, California

Introduction The Pacific Coastal and Marine Science Center is one of three U.S. Geological Survey science centers that serve the mission of the Coastal and Marine Hazards and Resources Program, the primary Federal marine geology and physical science research program focused on the Nation’s coastal and marine landscape. Our portfolio of coastal and marine projects in the Pacific Ocean provides the scientific information necessary to sustainably manage coastal and marine resources, to prepare for natural hazard events such as landslides and tsunamis, and to build resilience in coastal communities vulnerable to the effects of climate change, as well as storms, flooding, and risks to groundwater resources. The Nation’s demand for societally relevant coastal and marine science has never been greater, and we invite you to explore some of our ongoing Pacific Coastal and Marine Science Center activities in these pages.

General Information Product

Geologic framework of Mount Diablo, California

The basic stratigraphic and structural framework of Mount Diablo is described using a revised geologic map, gravity data, and aeromagnetic data. The mountain is made up of two distinct stratigraphic assemblages representing different depocenters that were juxtaposed by ~20 km of late Pliocene and Quaternary right-lateral offset on the Greenville-Diablo-Concord fault. Both assemblages are composed of Cretaceous and Cenozoic strata overlying a compound basement made up of the Franciscan and Great Valley complexes. The rocks are folded and faulted by late Neogene and Quaternary compressional structures related to both regional plate-boundary–normal compression and a restraining step in the strike-slip fault system. The core of the mountain is made up of uplifted basement rocks. Late Neogene and Quaternary deformation is overprinted on Paleogene extensional deformation that is evidenced at Mount Diablo by significant attenuation in the basement rocks and by an uptilted stepped graben structure on the northeast flank. Retrodeformation of the northeast flank suggests that late Early to early Late Cretaceous strata may have been deposited against and across a steeply west-dipping basement escarpment. The location of the mountain today was a depocenter through the Late Cretaceous and Paleogene and received shallow-marine deposits periodically into the late Miocene. Uplift of the mountain itself happened mostly in the Quaternary.

California

Laboratory electrical resistivity analysis of geologic samples from Fort Irwin, California

Correlating laboratory resistivity measurements with geophysical resistivity models helps constrain these models to the geology and lithology of an area. Throughout the Fort Irwin National Training Center area, 111 samples from both cored boreholes and surface outcrops were collected and processed for laboratory measurements. These samples represent various lithologic types that include plutonic and metamorphic (basement) rocks, lava flows, consolidated sedimentary rocks, and unconsolidated sedimentary deposits that formed in a series of intermountain basins. Basement rocks, lava flows, and some lithified tuffs are generally resistive (≥100 ohm-meters [Ω·m]) when saturated. Saturated unconsolidated samples are moderately conductive to conductive, with resistivities generally less than 100 Ω·m, and many of these samples are less than 50 Ω·m. The unconsolidated samples can further be separated into two broad groups: (1) younger sediments that are moderately conductive, owing to their limited clay content, and (2) older, more conductive sediments with a higher clay content that reflects substantial amounts of originally glassy volcanic ash subsequently altered to clay. The older sediments are believed to be Tertiary. Time-domain electromagnetic (TEM) data were acquired near most of the boreholes, and, on the whole, close agreements between laboratory measurements and resistivity models were found.

California

Geologic map of southwestern Sequoia National Park, Tulare County, California

This map shows the geology of 675 km 2 (260 mi 2 ) on the west slope of the Sierra Nevada, California, mainly in Sequoia National Park and Sequoia National Forest. It was produced by the U.S. Geological Survey (USGS) at the request of the National Park Service to complete the geologic map coverage of Kings Canyon and Sequoia National Parks. The area includes the Mineral King 15’ topographic quadrangle (sheet 1) and strips along the east and northeast edges of the Kaweah 15’ topographic quadrangle (sheet 2), both in Tulare County. Mapping was performed mainly on the 1:24,000-scale Mineral King, Silver City, Quinn Peak, Moses Mountain, Case Mountain, and Dennison Peak 7.5’ topographic quadrangle bases. Rocks within the study area are chiefly Cretaceous granites and granodiorites of the Sierra Nevada batholith that intruded coherent masses of Mesozoic metasedimentary and metavolcanic rocks. Quaternary till and talus are the principal surficial deposits, with the exception of a large bouldery alluvial apron near the southwest corner of the map area. The study area includes the headwaters of the Kaweah River (East and South Forks), Tule River (North Fork and North Fork of the Middle Fork), and the Little Kern River. Relief is considerable, with elevations spanning from 1,500 feet along the Middle Fork Kaweah River to 12,432 feet at the summit of Florence Peak along the crest of the Great Western Divide.

California

A summary report of the regional geology, environmental geology, OCS resource appraisal, petroleum potential, and operational considerations in the area of proposed lease sale 73, offshore California

This report reviews geological, geophysical and technological data pertinent to proposed Lease Sale 73. Under consideration is the entire continental margin of California that is bounded on the west by the 2500 meter isobath. This area encompasses the whole of the southern California Borderland, the continental shelves of central and northern California, and the upper part of the continental slope from Mexico on the south to Oregon on the north. The area includes both leased and unleased tracts and lies adjacent to highly productive coastal basins of central and northern California . Because the geology of the south and north parts of this large area differ, they are considered separately in this report.

California

A geologic interpretation of seismic-refraction results in northeastern California

In 1981, the U.S. Geological Survey conducted a seismic-refraction experiment in northeastern California designed to study the Klamath Mountains, Cascade Range, Modoc Plateau, and Basin and Range provinces. Key profiles include 135-km-long, north-south lines in the Klamath Mountains and Modoc Plateau provinces and a 260-km-long, east-west line crossing all of the provinces. The seismic-velocity models for the Klamath and Modoc lines are comparatively homogeneous laterally but are quite different from each other. The Klamath model is finely layered from the surface to at least 14-km depth, consisting of a series of high-velocity layers (6.1–6.7 km/s), ranging in thickness from 1 to 4 km, with alternating positive and negative velocity gradients. A layer with an unreversed velocity of 7.0 km/s extends from 14 km to an unknown depth. The Modoc model, in contrast, is relatively thickly layered and has lower velocities than does the Klamath model at all depths down to 25 km. An upper layer, 4.5 km thick, of low-velocity material (2.1–4.4 km/s) overlies a basement with a considerably higher velocity (6.2 km/s). Velocity increases slowly with depth, with a small velocity step (to 6.4 km/s) at 11 km and a 7.0-km/s layer beginning at 25-km depth. Moho is probably 38–45 km deep under the Modoc Plateau, but its depth is unknown under the Klamath Mountains. A combined velocity-density model for the east-west line consists of a western part similar in configuration to the Klamath velocity model, an eastern part similar to the Modoc velocity model, and laterally changing velocity-density structure in between, in the Cascade Range. Beneath its upper layer, the velocity model for the Modoc Plateau is similar to that determined by other researchers for the adjacent Sierra Nevada. The velocity model is unlike those for rift areas, to which the Modoc Plateau has been compared by some authors. We theorize that beneath a veneer of volcanic and sedimentary rocks (the upper layer), the Modoc Plateau is underlain by a basement of granitic and metamorphic rocks that, like rocks in the Sierra Nevada, are the roots of one or more magmatic arcs. The fine layering in the Klamath seismic-velocity model is consistent with the geologic structure of the Klamath Mountains, characterized by imbricate thrusting of oceanic rock layers of various compositions and ages. Independent modeling of aeromagnetic data indicates that the base of the Trinity ultramafic sheet, the second major rock layer down in the structural sequence, corresponds to a velocity step to 6.7 km/s at 7-km depth in our model. The 6.7-km/s layer beneath the Trinity ultramafic sheet apparently corresponds to rocks of the central metamorphic belt, which are mafic schists. Rock units structurally deeper than rocks of the central metamorphic belt can be correlated with velocity layers below the 6.7-km/s layer, but with less certainty. In the model for the east-west line, the region of laterally changing velocity structure beneath the Cascade Range includes a 10-km step down to the east in the top of the 7.0-km/s layer. This region of lateral velocity change we interpret to be a fault, fold, or intrusive contact (or some combination of the three) between the stack of oceanic rock layers that underlie the Klamath Mountains and the buried roots of magmatic arcs inferred to underlie the Modoc Plateau. Magmas forming the modern Cascade Range arc apparently rise through this region.

GSA Bulletin

Three-dimensional geologic mapping of the Cenozoic basin fill, Amargosa Desert basin, Nevada and California

Understanding the subsurface geologic framework of the Cenozoic basin fill that underlies the Amargosa Desert in southern Nevada and southeastern California has been improved by using borehole data to construct three-dimensional lithologic and interpreted facies models. Lithologic data from 210 boreholes from a 20-kilometer (km) by 90-km area were reduced to a limited suite of descriptors based on geologic knowledge of the basin and distributed in three-dimensional space using interpolation methods. The resulting lithologic model of the Amargosa Desert basin portrays a complex system of interfingered coarse- to fine-grained alluvium, playa and palustrine deposits, eolian sands, and interbedded volcanic units. Lithologic units could not be represented in the model as a stacked stratigraphic sequence due to the complex interfingering of lithologic units and the absence of available time-stratigraphic markers. Instead, lithologic units were grouped into interpreted genetic classes, such as playa or alluvial fan, to create a three-dimensional model of the interpreted facies data. Three-dimensional facies models computed from these data portray the alluvial infilling of a tectonically formed basin with intermittent internal drainage and localized regional groundwater discharge. The lithologic and interpreted facies models compare favorably to resistivity, aeromagnetic, and geologic map data, lending confidence to the interpretation.

California;Nevada

Age, distribution, and stratigraphic relationship of rock units in the San Joaquin Basin Province, California: Chapter 5 in Petroleum systems and geologic assessment of oil and gas in the San Joaquin Basin Province, California

The San Joaquin Basin is a major petroleum province that forms the southern half of California’s Great Valley, a 700-km-long, asymmetrical basin that originated between a subduction zone to the west and the Sierra Nevada to the east. Sedimentary fill and tectonic structures of the San Joaquin Basin record the Mesozoic through Cenozoic geologic history of North America’s western margin. More than 25,000 feet (>7,500 meters) of sedimentary rocks overlie the basement surface and provide a nearly continuous record of sedimentation over the past ~100 m.y. Further, depositional geometries and fault structures document the tectonic evolution of the region from forearc setting to strike-slip basin to transpressional margin. Sedimentary architecture in the San Joaquin Basin is complicated because of these tectonic regimes and because of lateral changes in depositional environment and temporal changes in relative sea level. Few formations are widespread across the basin. Consequently, a careful analysis of sedimentary facies is required to unravel the basin’s depositional history on a regional scale. At least three high-quality organic source rocks formed in the San Joaquin Basin during periods of sea level transgression and anoxia. Generated on the basin’s west side, hydrocarbons migrated into nearly every facies type in the basin, from shelf and submarine fan sands to diatomite and shale to nonmarine coarse-grained rocks to schist. In 2003, the U.S. Geological Survey (USGS) completed a geologic assessment of undiscovered oil and gas resources and future additions to reserves in the San Joaquin Valley of California (USGS San Joaquin Basin Province Assessment Team, this volume, chapter 1). Several research aims supported this assessment: identifying and mapping the petroleum systems, modeling the generation, migration, and accumulation of hydrocarbons, and defining the volumes of rock to be analyzed for additional resources. To better understand the three dimensional relationships between hydrocarbon source and reservoir rocks, we compiled a database consisting of more than 13,000 well picks and of one-mile resolution seismic grids. Both the well picks and the seismic grids characterize the depths to the top of key stratigraphic units. This database formed the basis of subsequent numerical modeling efforts, including the construction of a three- dimensional geologic model (Hosford Scheirer, this volume, chapter 7) and simulation of the petroleum systems in space and time (Peters, Magoon, Lampe, and others, this volume, chapter 12). To accomplish this modeling, we synthesized the age, geographic distribution, lithology, and petroleum characteristics of hydrocarbon source and reservoir rocks in the basin. The results of that synthesis are presented in this paper in the form of new stratigraphic correlation columns for the northern, central, and southern San Joaquin Valley (fig. 5.1; note that all figures are at the back of this report, following the References Cited). The stratigraphic relationships and ages published here draw heavily on published and unpublished studies of the San Joaquin Basin. The stratigraphy presented in each of the columns necessarily idealizes the subsurface geology over a relatively large area, instead of representing the specific geology at an individual well, oil and gas field, or outcrop. In this paper we present the background rationale for defining the geographic divisions of the basin (inset map, fig. 5.1), the paleontological time scales used for assigning absolute ages to rock units (figs. 5.2 and 5.3), and the supporting maps illustrating the geographic distribution of each rock type included in the stratigraphic column (figs. 5.4 through 5.64).

California

Seismic hazard mapping of California considering site effects

In this paper, we have combined the U.S. Geological Survey's National Seismic Hazard Maps model with the California geologic map showing 17 generalized geologic units that can be defined by their VS30. We regrouped these units into seven VS30 values and calculated a probabilistic seismic hazard map for the entire state for each VS30 value. By merging seismic hazard maps based on the seven different V S30 values, a suite of seismic hazard maps was computed for 0.2 and 1.0 s spectral ordinates at 2% probability of exceedance (PE) in 50 years. The improved hazards maps explicitly incorporate the site effects and their spatial variability on ground motion estimates. The spectral acceleration (SA) at 1.0 s map of seismic shaking potential for California has now been published as California Geological Survey Map Sheet 48.

California

Innovation in monitoring: The U.S. Geological Survey Sacramento–San Joaquin River Delta, California, flow-station network

The U.S. Geological Survey (USGS) installed the first gage to measure the flow of water into California’s Sacramento–San Joaquin River Delta from the Sacramento River in the late 1800s. Today, a network of 35 hydro-acoustic meters measure flow throughout the delta. This region is a critical part of California’s freshwater supply and conveyance system. With the data provided by this flow-station network—sampled every 15 minutes and updated to the web every hour—state and federal water managers make daily decisions about how much freshwater can be pumped for human use, at which locations, and when. Fish and wildlife scientists, working with water managers, also use this information to protect fish species affected by pumping and loss of habitat. The data are also used to help determine the success or failure of efforts to restore ecosystem processes in what has been called the “most managed and highly altered” watershed in the country.

California

Location and age database for selected foraminifer samples collected by Exxon Petroleum geologists in California

Most of the geologic maps published for central California before 1960 were made without the benefit of age determinations from microfossils. The ages of Cretaceous and Tertiary rocks in the mostly poorly exposed and structurally complex sedimentary rocks represented in the Coast Ranges are critical in determining stratigraphic succession or lack of it, and in determining whether the juxtaposition of similar appearing but different age formations means a fault is present. Since the 1930’s, at least, oil company geologists have used microfossils to assist them in geologic mapping and in determining the environments of deposition of the sediment containing the microfossils. This information has been so confidential that some companies even coded the names of foraminifers to prevent disclosure. In the past 20 years, however, the attitude of petroleum companies about this information has changed, and many of the formerly confidential materials and reports are now available. We report here on 1,964 Exxon foraminifer samples mostly from surface localities in the San Francisco Bay region, and elsewhere in California. Most but not all the samples were plotted on U. S. Geological Survey (USGS) 7.5’ topographic maps or on obsolete USGS 15’ maps. The information from the slides can be used to update geologic maps prepared without the benefit of microfossil data, to analyze the depth and temperature of ocean water covering parts of California during the Mesozoic and Cenozoic Eras, and for solving nomenclature and other scientific problems. A similar report on more than 30,000 slides for surface samples collected by Chevron geologists has been released (Brabb and Parker, 2003), and another report provides information on slides for more than 2000 oil test wells in Northern California (Brabb, Powell, and Brocher, 2001).

California

State summaries: California

According to the United States Geological Survey (USGS), California ranked second behind Arizona among the states in nonfuel mineral production during 2005. It accounted for 7% of the US's total. The market value of mineral production for California amounted to $3.7 billion. During the year, California produced 30 varieties of industrial minerals. The nonfuel minerals came from 820 active mines.

Mining Engineering

A four-dimensional petroleum systems model for the San Joaquin Basin Province, California: Chapter 12 in Petroleum systems and geologic assessment of oil and gas in the San Joaquin Basin Province, California

A calibrated numerical model depicts the geometry and three-dimensional (3-D) evolution of petroleum systems through time (4-D) in a 249 x 309 km (155 x 192 mi) area covering all of the San Joaquin Basin Province of California. Model input includes 3-D structural and stratigraphic data for key horizons and maps of unit thickness, lithology, paleobathymetry, heat flow, original total organic carbon, and original Rock-Eval pyrolysis hydrogen index for each source rock. The four principal petroleum source rocks in the basin are the Miocene Antelope shale of Graham and Williams (1985; hereafter referred to as Antelope shale), the Eocene Kreyenhagen Formation, the Eocene Tumey formation of Atwill (1935; hereafter referred to as Tumey formation), and the Cretaceous to Paleocene Moreno Formation. Due to limited Rock-Eval/total organic carbon data, the Tumey formation was modeled using constant values of original total organic carbon and original hydrogen index. Maps of original total organic carbon and original hydrogen index were created for the other three source rocks. The Antelope shale was modeled using Type IIS kerogen kinetics, whereas Type II kinetics were used for the other source rocks. Four-dimensional modeling and geologic field evidence indicate that maximum burial of the three principal Cenozoic source rocks occurred in latest Pliocene to Holocene time. For example, a 1-D extraction of burial history from the 4-D model in the Tejon depocenter shows that the bottom of the Antelope shale source rock began expulsion (10 percent transformation ratio) about 4.6 Ma and reached peak expulsion (50 percent transformation ratio) about 3.6 Ma. Except on the west flank of the basin, where steep dips in outcrop and seismic data indicate substantial uplift, little or no section has been eroded. Most petroleum migration occurred during late Cenozoic time in distinct stratigraphic intervals along east-west pathways from pods of active petroleum source rock in the Tejon and Buttonwillow depocenters to updip sandstone reservoirs. Satisfactory runs of the model required about 18 hours of computation time for each simulation using parallel processing on a Linux-based cluster.

California

Implementation plan for the southern Pacific Border and Sierra-Cascade Mountains provinces

Introduction The National Cooperative Geologic Mapping Program (NCGMP) is publishing a strategic plan titled Renewing the National Cooperative Geologic Mapping Program as the Nation’s Authoritative Source for Modern Geologic Knowledge (Brock and others, in press). The plan provides a vision, mission, and goals for the program during the years 2020–2030, which are: Vision .—Create an integrated, three-dimensional, digital geologic map of the United States. Mission .—Characterize, interpret, and disseminate a national geologic framework model of the Earth through geologic mapping. Goal .—Focus on geologic mapping as a core function of the U.S. Geological Survey (USGS) within the long-term vision of adequately mapping the Nation’s geologic framework in three dimensions. In order to achieve the goals outlined in the strategic plan, the NCGMP has developed an implementation plan. This plan will guide the annual review of projects carried out by USGS staff (FEDMAP) described in the plan and the development of the annual FEDMAP prospectus that will ensure the effective application of the NCGMP strategy. This publication describes the implementation plan of the NCGMP strategy for the southern Pacific Border and Sierra-Cascade Mountains provinces, as defined by Fenneman (1917, 1928, and 1946). This implementation plan focuses on the geology of California and a sliver of Nevada surrounding Lake Tahoe. The southern Pacific Border and Sierra-Cascade Mountains provinces encompass the varied landscapes of the high Sierra Nevada, the Central Valley, and Coast Ranges in northern and central California and the Peninsular Ranges, Continental Borderland, Los Angeles Basin-San Gabriel-San Bernardino valleys, western and central Transverse Ranges, and northernmost Salton Trough in southern California. Societal demands create a need for earth-science data in each of these landscapes. The broader San Francisco Bay area, Central Valley, Los Angeles-San Gabriel-San Bernardino lowlands, and the coastal lowlands that border the Peninsular Ranges are densely populated (about 30 million people) areas at high risk of natural hazards. The mountains of the Sierra Nevada, Peninsular Ranges, and Transverse Ranges, and the coast all provide numerous recreational opportunities that attract visitors from around the world, whereas previously these ranges attracted people to mine their resources. The agricultural capacity of the Central Valley is a critical resource for the Nation that is increasingly water limited. The southern. Pacific Border and Sierra-Cascade Mountains provinces, at the edge of the North American continent, were profoundly influenced by subduction zone tectonics during the Mesozoic and early Cenozoic (ongoing in northernmost California) and subsequently by the inception, development, and present activity of the San Andreas transform margin system. Although the geology of this region is the poster child of fundamental conceptual models of subduction zone complexes, forearc basins, ophiolite obductions, magmatic arcs, and suspect terranes, as well as hosting one of Earth’s most notorious continental transform faults—the San Andreas Fault—important questions that have important societal consequences remain to be answered. Most of California’s population reside in these provinces and live within 30 miles of an active fault (according to www.earthquakeauthority.com ) yet new faults continue to be discovered, highlighting the importance of deformation off the main San Andreas Fault. Bedrock, surficial, and three-dimensional (3D) geologic maps depicting stratigraphic structure and depth to crystalline basement rocks provide critical context and information for understanding fault rupture, distributed deformation, fault connectivity, and history in addition to providing crucial data that enable forecasting of shaking amplitude and length from hypothetical earthquake scenarios. The tectonic evolution of California produced not only stunning mountains, with associated hazards from landslides and active volcanoes, but also fertile valleys that make California the top agricultural producer in the country in terms of cash receipts (according to www.ers.usda.gov/faqs ). These valleys lie atop large basins that not only store groundwater but, in many cases, host oil and gas fields, contributing to the fourth highest hydrocarbon production by State in the country in 2016 (according to https://www.aei.org/carpe-diem/animated-chart-of-us-oil-production-by-state-1981-2017 ). Water is a key resource increasingly stressed by growing agricultural, industrial, and residential needs. Warmer and drier conditions have led to an increased reliance on extracting groundwater resources, whose availability and quality are dictated at the first order by the 3D spatial distribution of bedrock and Quaternary surficial deposits. Thus, assessment of this critical resource is inextricably tied to knowledge of the surficial and subsurface geologic structure and material types.

California, Nevada

Quaternary tectonic setting of South-Central coastal California

Recent geodetic, geologic, and seismologic studies show that the south-central coast of California is a region of active Quaternary deformation. Northeast-directed crustal shortening is occurring in a triangular-shaped region between the Hosgri-San Simeon fault system on the west, the Southern Coast Ranges on the northeast, and the western Transverse Ranges on the south. We informally call this region the Los Osos domain. In this study, we conducted detailed geological, seismological, and geophysical investigations to characterize the nature and rates of deformation in the domain. Locations of active and potentially active faults and folds are compiled at a scale of 1:250,000 for the entire domain based primarily on onshore geologic data and offshore geophysical data. Crustal shortening in the domain is accommodated by a series of prominent northwest-trending reverse faults and localized folding. The reverse faults separate distinct structural blocks that have little or no internal deformation. Hangingwall blocks are being uplifted at rates of up to 0.2 mm/yr. Footwall blocks are either static or slowly subsiding at rates of 0.1 mm/yr or less, except for localized areas of concentrated subsidence directly adjacent to some faults. The cumulative rate of crustal shortening is about 1 to 2 mm/yr across the northern part of the domain based on observed geologic deformation. Cumulative shortening across the central and southern parts of the domain is poorly constrained by geologic data and may approach 2 to 3 mm/yr. Historical and instrumental seismicity generally are spatially associated with the uplifted blocks and bordering reverse faults to depths of about 10 km. Together with near-surface geological data and deeper crustal geophysical imaging that show high-angle faulting, the seismicity data indicate that the reverse faults probably extend to the base of the seismogenic crust. The base of the seismogenic crust may correspond with a mid-crustal detachment or decollement surface into which the reverse faults root. We speculate that the detachment may coincide, in part, with the top of a northeast-dipping slab of oceanic crust that extends beneath the western margin of the continent or with the brittle-ductile transition above the subducted slab. The Los Osos domain of north-northeast/south-southwest crustal shortening is structurally detached from the offshore Hosgri Fault Zones. Both the pattern and regional extent of deformation in the Los Osos domain contrast sharply with that of the offshore Santa Maria Basin. The basin is undergoing minor east-northeast/west-southwest crustal shortening at rates of less than 0.1 mm/yr and is moving northwestward at a rate of about 1 to 3 mm/yr relative to the Los Osos domain along the San Simeon and Hosgri Fault Zones. Geodetic data and the kinematics of north-northeast-directed crustal shortening of the Los Osos domain east of the Hosgri Fault Zone show that the rate and cumulative amount of right-slip along the Hosgri Fault Zone progressively decrease southward. Quaternary deformation within the Los Osos domain is related to distributed dextral simple shear associated with Pacific-North American plate motion. Paleomagnetic data show that clockwise rotation of the western Transverse Ranges has occurred along the southern boundary of the domain during the past 6 m.y. During this time, the Salinian crustal block, which forms the eastern boundary of the Los Osos domain, has remained relatively stable. Internal shortening of the Los Osos domain has accommodated the relative motions of these bordering crustal blocks, particularly the rotation of the western Transverse Ranges.

Bulletin

The use of geologic and seismologic information to reduce earthquake Hazards in California

Five examples illustrate how geologic and seismologic information can be used to reduce the effects of earthquakes Included are procedures for anticipating damage to critical facilities, preparing, adopting, or implementing seismic safety studies, plans, and programs, retrofitting highway bridges, regulating development in areas subject to fault-rupture, and strengthening or removing unreinforced masonry buildings. The collective effect of these procedures is to improve the public safety, health, and welfare of individuals and their communities. ?? 1984 Springer-Verlag New York Inc.

Environmental Geology and Water Sciences