Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “World & I”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79Linked to original sources
USGS1973

Karst hydrology: A review

Karst regions of the world are characterized by limestones and other soluble rocks at or near land surface that have been modified by solutional erosion. Such surface features as sinks, long dry valleys, sparse streams, and bare rock and such subsurface features as caverns, arterial solution openings leading to large springs, and a deep water table are typical of karst terranes. These features result in an uneven distribution of permeability in karst systems and surface and subsurface hydrologic conditions that require special hydrogeologic studies. Local high permeability at shallow depth in mature karst regions leads to an ecology associated with a soilless and water-scarce surface environment. Many practical problems result from this high permeability, including: (1) scarcity and poor predictability of groundwater supplies; (2) scarcity of surface-water supplies; (3) instability of the ground; (4) leakage of surface reservoirs; and (5) an unreliable waste-disposal environment. Interest in karst hydrology has increased greatly in the past decade; this interest has resulted in the international exchange of numerous published reports on local areas and on special topical karst problems. Many of these reports have been used by the authors in preparing this paper, which synthesizes results of many workers and focuses attention on: (1) the development of karst features through hydrologic processes; and (2) hydrologic systems of karst terranes.

Journal of Hydrology↗
USGS1990

Theory and application of an approximate model of saltwater upconing in aquifers

Motion and mixing of salt water and fresh water are vitally important for water-resource development throughout the world. An approximate model of saltwater upconing in aquifers is developed, which results in three non-linear coupled equations for the freshwater zone, the saltwater zone, and the transition zone. The description of the transition zone uses the concept of a boundary layer. This model invokes some assumptions to give a reasonably tractable model, considerably better than the sharp interface approximation but considerably simpler than a fully three-dimensional model with variable density. We assume the validity of the Dupuit-Forchheimer approximation of horizontal flow in each layer. Vertical hydrodynamic dispersion into the base of the transition zone is assumed and concentration of the saltwater zone is assumed constant. Solute in the transition zone is assumed to be moved by advection only. Velocity and concentration are allowed to vary vertically in the transition zone by using shape functions. Several numerical techniques can be used to solve the model equations, and simple analytical solutions can be useful in validating the numerical solution procedures. We find that the model equations can be solved with adequate accuracy using the procedures presented. The approximate model is applied to the Smoky Hill River valley in central Kansas. This model can reproduce earlier sharp interface results as well as evaluate the importance of hydrodynamic dispersion for feeding salt water to the river. We use a wide range of dispersivity values and find that unstable upconing always occurs. Therefore, in this case, hydrodynamic dispersion is not the only mechanism feeding salt water to the river. Calculations imply that unstable upconing and hydrodynamic dispersion could be equally important in transporting salt water. For example, if groundwater flux to the Smoky Hill River were only about 40% of its expected value, stable upconing could exist where hydrodynamic dispersion into a transition zone is the primary mechanism for moving salt water to the river. The current model could be useful in situations involving dense saltwater layers.

Journal of Hydrology↗
USGS1996

Analytical solutions to non-Fickian subsurface dispersion in uniform groundwater flow

Analytical solutions are obtained by the Fourier transform technique for the one-, two-, and three-dimensional transport of a conservative solute injected instantaneously in a uniform groundwater flow. These solutions account for dispersive non-linearity caused by the heterogeneity of the hydraulic properties of aquifer systems and can be used as building blocks to construct solutions by convolution (principle of superposition) for source conditions other than slug injection. The dispersivity is assumed to vary parabolically with time and is thus constant for the entire system at any given time. Two approaches for estimating time-dependent dispersion parameters are developed for two-dimensional plumes. They both require minimal field tracer test data and, therefore, represent useful tools for assessing real-world aquifer contamination sites. The first approach requires mapped plume-area measurements at two specific times after the tracer injection. The second approach requires concentration-versus-time data from two sampling wells through which the plume passes. Detailed examples and comparisons with other procedures show that the methods presented herein are sufficiently accurate and easier to use than other available methods.

Journal of Hydrology↗
USGS1984

Discovery of two new large submarine canyons in the Bering Sea

The Beringian continental margin is incised by some of the world's largest submarine canyons. Two newly discovered canyons, St. Matthew and Middle, are hereby added to the roster of Bering Sea canyons. Although these canyons are smaller and not cut back into the Bering shelf like the five very large canyons, they are nonetheless comparable in size to most of the canyons that have been cut into the U.S. eastern continental margin and much larger than the well-known southern California canyons. Both igneous and sedimentary rocks of Eocene to Pliocene age have been dredged from the walls of St. Matthew and Middle Canyons as well as from the walls of several of the other Beringian margin canyons, thus suggesting a late Tertiary to Quaternary genesis of the canyons. We speculate that the ancestral Yukon and possibly Anadyr Rivers were instrumental in initiating the canyon-cutting processes, but that, due to restrictions imposed by island and subsea bedrock barriers, cutting of the two newly discovered canyons may have begun later and been slower than for the other five canyons.

Bering Sea↗
USGS1976

Foraminiferal biostratigraphy of the shelf edge: a key to late Quaternary paleoenvironments

Foraminiferal assemblages in eight piston cores from West Flower Garden Bank at the edge of the Texas continental shelf contain a nearly complete record of late Quaternary paleoclimatic and geologic events. The faunas are divisible into three distinct successive biofacies on the basis of both planktonic and benthic foraminifers: the basal Inflata Facies accumulated in cool shallow waters during late Pleistocene glaciation; the middle Crassaformis Facies represents a deepening sea that had warming surface waters; the upper Cultrata Facies is characteristic of the Holocene outer-shelf environment. Sea level was at -73 m and -53 m at the end of deposition of the Inflata and Crassaformis Facies, respectively. The biostratigraphic events at West Flower Garden Bank can be accurately correlated with those recorded in the middle and inner shelf and in deep-sea cores. The sequence of late Quaternary sea level and paleotemperature changes in the northern Gulf of Mexico can thereby be reconstructed. Eventually, this knowledge can be integrated with similar data from the shelf edge in other parts of the world to help bridge the gap between the known Quaternary record of the deep sea and that of the continents. ?? 1976.

Palaeogeography, Palaeoclimatology, Palaeoecology↗
USGS1981

The terminal Eocene event and the Polish connection

The Eocene/Oligocene boundary in Europe is marked by major discontinuities in all environments: the “Grande Coupure” in continental mammals; the elimination of semitropical elements from high-latitude floras; the virtually complete replacement of the shallow-marine malacofauna; and an extraordinary downslope excursion of carbonate deposition in deep-ocean basins (drop in the CCD). These phenomena collectively represent the “Terminal Eocene Event” (TEE). In the Carpathian Mountains, the TEE is manifested in the thin but regionally persistent Globigerina Marl, a calcareous unit containing abundant cool-water microplankton that occurs within very thick, siliceous, bathyal flysch sequences. In southern Poland, the marl is of very latest Eocene age, within planktonic foraminifera zone P17, calcareous nannoplankton zone NP19/20, and the zone of the dinoflagellate Rhomdodinium perforatum . Zircons from bentonites bracketing the marl are dated by fission-track analysis; at Polany, two underlying bentonites are 41.7 and 39.8 Ma, and at Znamirowice two overlying bentonites are 34.6 and 28.9 Ma, in sequence. This accords with glauconite K/Ar ages in Western Europe by which the Eo/Oligocene boundary age is estimated at 37–38 Ma. Global correlations indicate that the TEE corresponds to a major glacio-eustatic regression with a duration of about 0.5 Ma, in which a large Antarctic ice cap was formed, the ocean circulation was permanently changed to the psychrospheric condition, and world climate shifted irreversibly towards the modern state.

Palaeogeography, Palaeoclimatology, Palaeoecology↗
USGS1981

Arid land monitoring using Landsat albedo difference images

The Landsat albedo, or percentage of incoming radiation reflected from the ground in the wavelength range of 0.5 [mu]m to 1.1 [mu]m, is calculated from an equation using the Landsat digital brightness values and solar irradiance values, and correcting for atmospheric scattering, multispectral scanner calibration, and sun angle. The albedo calculated for each pixel is used to create an albedo image, whose grey scale is proportional to the albedo. Differencing sequential registered images and mapping selected values of the difference is used to create quantitative maps of increased or decreased albedo values of the terrain. All maps and other output products are in black and white rather than color, thus making the method quite economical. Decreases of albedo in arid regions may indicate improvement of land quality; increases may indicate degradation. Tests of the albedo difference mapping method in the Desert Experimental Range in southwestern Utah (a cold desert with little long-term terrain change) for a four-year period show that mapped changes can be correlated with erosion from flash floods, increased or decreased soil moisture, and increases or decreases in the density of desert vegetation, both perennial shrubs and annual plants. All terrain changes identified in this test were related to variations in precipitation. Although further tests of this method in hot deserts showing severe "desertification" are needed, the method is nevertheless recommended for experimental use in monitoring terrain change in other arid and semiarid regions of the world.

Utah↗
USGS1969

Blueschist-facies metamorphism related to regional thrust faulting

Rocks of the blueschist (glaucophane schist) facies occur throughout the world in narrow tectonic belts associated with ultramafic rocks. In the Coast Range province of California, blueschist rocks are devloped in the eugeosynclinal Franciscan Formation of Late Mesozoic age. The blueschist rocks form a narrow belt for more than 800 km along the eastern margin of this province and commonly are separated from rocks of an overlying thrust plate by serpentinite. Increasing metamorphism upward toward the thrust fault is indicated mineralogically by a transition from pumpellyite to lawsonite and texturally by a transition from metagraywacke to schist. The blueschist metamorphism probably occurred during thrusting in a zone of anomalously high water pressure in the lower plate along the sole of the thrust fault. This tectonic mode of origin for blueschist differs from the generally accepted hypothesis involving extreme depth of burial. Other belts of blueschist-facies rocks, including the Sanbagawa belt of Japan, the marginal synclinal belt of New Zealand, and the blueschist-ultramafic belts of Venezuela, Kamchatka, Ural mountains, and New Caledonia have similar geologic relations and might be explained in the same manner.

Tectonophysics↗
USGS1983

Accumulation of fossil fuels and metallic minerals in active and ancient rift lakes

A study of active and ancient rift systems around the world suggests that accumulations of fossil fuels and metallic minerals are related to the interactions of processes that form rift valleys with those that take place in and around rift lakes. The deposition of the precursors of petroleum, gas, oil shale, coal, phosphate, barite, Cu-Pb-Zn sulfides, and uranium begins with erosion of uplifted areas, and the consequent input of abundant nutrients and solute loads into swamps and tectonic lakes. Hot springs and volcanism add other nutrients and solutes. The resulting high biological productivity creates oxidized/reduced interfaces, and anoxic and H 2 S-rich bottom waters which preserves metal-bearing organic tissues and horizons. In the depositional phases, the fine-grained lake deposits are in contact with coarse-grained beach, delta, river, talus, and alluvial fan deposits. Earthquake-induced turbidites also are common coarse-grained deposits of rift lakes. Postdepositional processes in rifts include high heat flow and a resulting concentration of the organic and metallic components that were dispersed throughout the lakebeds. Postdepositional faulting brings organic- and metal-rich sourcebeds in contact with coarse-grained host and reservoir rocks. A suite of potentially economic deposits is therefore a characteristic of rift valleys.

Tectonophysics↗
USGS1984

A review of crust and upper mantle structure studies of the Snake River Plain-Yellowstone volcanic system: A major lithospheric anomaly in the western U.S.A.

The Snake River Plain-Yellowstone volcanic system is one of the largest, basaltic, volcanic field in the world. Here, there is clear evidence for northeasterly progression of rhyolitic volcanism with its present position in Yellowstone. Many theories have been advanced for the origin of the Snake River Plain-Yellowstone system. Yellowstone and Eastern Snake River Plain have been studied intensively using various geophysical techniques. Some sparse geophysical data are available for the Western Snake River Plain as well. Teleseismic data show the presence of a large anomalous body with low P- and S-wave velocities in the crust and upper mantle under the Yellowstone caldera. A similar body in which compressional wave velocity is lower than in the surrounding rock is present under the Eastern Snake River Plain. No data on upper mantle anomalies are available for the Western Snake River Plain. Detailed seismic refraction data for the Eastern Snake River Plain show strong lateral heterogeneities and suggest thinning of the granitic crust from below by mafic intrusion. Available data for the Western Snake River Plain also show similar thinning of the upper crust and its replacement by mafic material. The seismic refraction results in Yellowstone show no evidence of the low-velocity anomalies in the lower crust suggested by teleseismic P-delay data and interpreted as due to extensive partial melting. However, the seismic refraction models indicate lower-than-normal velocities and strong lateral inhomogeneities in the upper crust. Particularly obvious in the refraction data are two regions of very low seismic velocities near the Mallard Eake and Sour Creek resurgent domes in the Yellowstone caldera. The low-velocity body near the Sour Creek resurgent dome is interpreted as partially molten rock. Together with other geophysical and thermal data, the seismic results indicate that a sub-lithospheric thermal anomaly is responsible for the time-progressive volcanism along the Eastern Snake River Plain. However, the exact mechanism responsible for the volcanism and details of magma storage and migration are not yet fully understood.

California, Idaho, Montana, Nevada, Oregon, Washin↗
USGS1989

The Richter scale: its development and use for determining earthquake source parameters

The M L scale, introduced by Richter in 1935, is the antecedent of every magnitude scale in use today. The scale is defined such that a magnitude-3 earthquake recorded on a Wood-Anderson torsion seismometer at a distance of 100 km would write a record with a peak excursion of 1 mm. To be useful, some means are needed to correct recordings to the standard distance of 100 km. Richter provides a table of correction values, which he terms -log A o , the latest of which is contained in his 1958 textbook. A new analysis of over 9000 readings from almost 1000 earthquakes in the southern California region was recently completed to redetermine the -log A o values. Although some systematic differences were found between this analysis and Richter's values (such that using Richter's values would lead to under and overestimates of M L at distances less than 40 km and greater than 200 km, respectively), the accuracy of his values is remarkable in view of the small number of data used in their determination. Richter's corrections for the distance attenuation of the peak amplitudes on Wood-Anderson seismographs apply only to the southern California region, of course, and should not be used in other areas without first checking to make sure that they are applicable. Often in the past this has not been done, but recently a number of papers have been published determining the corrections for other areas. If there are significant differences in the attenuation within 100 km between regions, then the definition of the magnitude at 100 km could lead to difficulty in comparing the sizes of earthquakes in various parts of the world. To alleviate this, it is proposed that the scale be defined such that a magnitude 3 corresponds to 10 mm of motion at 17 km. This is consistent both with Richter's definition of M L at 100 km and with the newly determined distance corrections in the southern California region. Aside from the obvious (and original) use as a means of cataloguing earthquakes according to size, ML has been used in predictions of ground shaking as a function of distance and magnitude; it has also been used in estimating energy and seismic moment. There is a good correlation of peak ground velocity and the peak motion on a Wood-Anderson instrument at the same location, as well as an observationally defined (and theoretically predicted) nonlinear relation between M L and seismic moment. An important byproduct of the establishment of the M L scale is the continuous operation of the network of Wood-Anderson seismographs on which the scale is based. The records from these instruments can be used to make relative comparisons of amplitudes and waveforms of recent and historic earthquakes; furthermore, because of the moderate gain, the instruments can write onscale records from great earthquakes at teleseismic distances and thus can provide important information about the energy radiated from such earthquakes at frequencies where many instruments have saturated.

California↗
USGS1989

Dikes, joints, and faults in the upper mantle

Three different types of macroscopic fractures are recognized in upper-mantle and lower-crustal xenoliths in volcanic rocks from around the world: 1. (1) joints that are tensile fractures not occupied by crystallized magma products 2. (2) dikes that are tensile fractures occupied by mafic magmas crystallized to pyroxenites, gabbros or hydrous-mineral-rich rocks, 3. (3) faults that are unfilled shear fractures with surface markings indicative of shear displacement. In addition to intra-xenolith fractures, xenoliths commonly have polygonal or faceted shapes that represent fractures exploited during incorporation of the xenoliths into the host magma that brought them to the surface. The various types of fractures are considered to have formed in response to the pressures associated with magmatic fluids and to the ambient tectonic stress field. The presence of fracture sets and crosscutting relations indicate that both magma-filled and unfilled fractures can be contemporaneous and that the local stress field can change with time, leading to repeated episodes of fracture. These observations give insight into the nature of deep fracture processes and the importance of fluid-peridotite interactions in the mantle. We suggest that unfilled fractures were opened by volatile fluids exsolved from ascending magmas to the tops of growing dikes. These volatile fluids are important because they are of low viscosity and can rapidly transmit fluid pressure to dike and fault tips and because they lower the energy and tectonic stresses required to extend macroscopic cracks and to allow sliding on pre-existing fractures. Mantle seismicity at depths of 20-65 km beneath active volcanic centers in Hawaii corresponds to the depth interval where CO2-rich fluids are expected to be liberated from ascending basaltic magmas, suggesting that such fluids play an important role in facilitating earthquake instabilities in the presence of tectonic stresses. Other phenomena related to the fractures include permeation of peridotite by fluid inclusions derived by degassing of magmas, partial melting of peridotite and dike rocks, and metasomatic alteration of peridotite host rock by magmas emplaced in fractures. These effects of magmatism generally reduce the bulk density of peridotite and might also reduce seismic velocities. The velocity contrasts between fractured and unfractured peridotite might be detected by seismic-velocity profiling techniques.

Tectonophysics↗
USGS1994

Third-order Middle Miocene-Early Pliocene depositional sequences in the prograding delta complex of the Pannonian Basin

Few studies exist in the geologic literature that show the distribution of seismic facies and depositional sequences within a lacustrine basin. The Pannonian Basin of Central Europe offers a unique opportunity to evaluate the influence of the eustatic signal on lacustrine deposition. Seismic stratigraphie and sedimentological studies indicate that the Middle Miocene-Early Pliocene infill of the transtensional Pannonian Basin was formed by large delta systems. Systematic sequence stratigraphie analysis of 6000 km of reflection seismic data and more than 100 hydrocarbon exploration wells in Hungary allowed the identification of twelve third-order sequence boundaries in the late Neogene sedimentary fill. This number of depositional sequences corresponds to that of the published global eustatic curve for this time period. Furthermore, based on magnetostratigraphic and radiometric data, the ages of these depositional sequences can be tentatively correlated with the global eustatic curve. The Pannonian Basin became isolated from the world sea at the Sarmatian/Pannonian (11.5 Ma) boundary and formed a large lake. The stratal patterns and sedimentary facies of individual systems tracts within the lacustrine sequences display the same characteristics as marine depositional sequences. The relatively low rate of thermal subsidence and the high rate of sediment supply resulted in a good sequence resolution. Within the third-order sequences higher-order sequences can be recognized with an average duration of about 0.1-0.5 Ma.

Tectonophysics↗
USGS1981

Natural occurrence and significance of fluids indicating high pressure and temperature

Most natural minerals have formed from a fluid phase such as a silicate melt or a saline aqueous solution. Fluid inclusions are tiny volumes of such fluids that were trapped within the growing crystals. These inclusions can provide valuable but sometimes ambiguous data on the temperature, pressure, and composition of these fluids, many of which are not available from any other source. They also provide “visual autoclaves” in which it is possible to watch, through the microscope, the actual phase changes take place as the inclusions are heated. This paper reviews the methods of study and the results obtained, mainly on inclusions formed from highly concentrated solutions, at temperatures ≥500°C. Many such fluids have formed as a result of immiscibility with silicate melt in igneous or high-temperature metamorphic rocks. These include fluids consisting of CO 2 , H 2 O, or hydrosaline melts that were <50% H 2 O. From the fluid inclusion evidence it is clear that a boiling, very hot, very saline fluid was present during the formation of most of the porphyry copper deposits in the world. Similarly, from the inclusion evidence it is clear that early (common) pegmatites formed from essentially silicate melts and that the late, rare-element-bearing and chamber-type pegmatites formed from a hydrosaline melt or a more dilute water solution. The evidence on whether this change in composition from early to late solutions was generally continuous or involved immiscibility is not as clear.

Physics and Chemistry of the Earth↗
USGS1984

Accumulation of organic matter in Cretaceous oxygen-deficient depositional environments in the central Pacific Ocean

Complete records of organic-carbon-rich Cretaceous strata were continuouslycored on the flanks of the Mid-Pacific Mountains and southern Hess Rise in the central North Pacific Ocean during DSDP Leg 62. Organic-carbon-rich laminated silicified limestones were deposited in the western Mid-Pacific Mountains during the early Aptian, a time when that region was south of the equator and considerably shallower than at present. Organic-carbon-rich, laminated limestone on southern Hess Rise overlies volcanic basement and includes 136 m of stratigraphic section of late Albian to early Cenomanian age. This limestone unit was deposited rapidly as Hess Rise was passing under the equatorial high-productivity zone and was subsiding from shallow to intermediate depths. The association of volcanogenic components with organic-carbon-rich strata on Hess Rise in the Mid-Pacific Mountains is striking and suggests that there was a coincidence of mid-plate volcanic activity and the production and accumulation of organic matter at intermediate water depths in the tropical Pacific Ocean during the middle Cretaceous. Pyrolysis assays and analyses of extractable hydrocarbons indicate that the organic matter in the limestone on Hess Rise is composed mainly of lipid-rich kerogen derived from aquatic marine organisms and bacteria. Limestones from the Mid-Pacific Mountains generally contain low ratios of pyrolytic hydrocarbons to organic carbon and low hydrogen indices, suggesting that the organic matter may contain a significant proportion of land-derived material, possibly derived from numerous volcanic islands that must have existed before the area subsided. The organic carbon in all samples analyzed is isotopically light ( δ 13 C − 24 to − 29 per mil) relative to most modern rine organic carbon, and the lightest carbon is also the most lipid-rich. There is a positive linear correlation between sulfur and organic carbon in samples from Hess Rise and from the Mid-Pacific Mountains. The slopes and intercepts of C-S regression lines however, are different for each site and all are different from regression lines for samples from modern anoxic marine sediments and from Black Sea cores. The organic-carbon-rich limestones on Hess Rise, the Mid-Pacific Mountains, and other plateaus and seamounts in the Pacific Ocean are not synchronous but do occur within the same general middle Cretaceous time period as organic-carbon-rich lithofacies elsewhere in the world ocean, particularly in the Atlantic Ocean. Strata of equivalent age in the deep basins of the Pacific Ocean are not rich in organic carbon, and were deposited in oxygenated environments. This observation, together with the evidence that the plateau sites were considerably shallower and closse to the equator during the middle Creataceous suggests that local tectonic and hydrographic conditions may have resulted in high surface-water productivity and the preservation of organic matter in an oxygen-deficient environment where an expanded mid-water oxygen minimum developed and impinged on elevated platforms and seamounts.

Organic Geochemistry↗
USGS1995

A review of the geochemistry of methane in natural gas hydrate

The largest accumulations on Earth of natural gas are in the form of gas hydrate, found mainly offshore in outer continental margin sediment and, to a lesser extent, in polar regions commonly associated with permafrost. Measurements of hydrocarbon gas compositions and of carbon-isotopic compositions of methane from natural gas hydrate samples, collected in subaquatic settings from around the world, suggest that methane guest molecules in the water clathrate structures are mainly derived by the microbial reduction of CO 2 from sedimentary organic matter. Typically, these hydrocarbon gases are composed of > 99% methane, with carbon-isotopic compositions (δ 13 C PDB ) ranging from − 57 to − 73‰. In only two regions, the Gulf of Mexico and the Caspian Sea, has mainly thermogenic methane been found in gas hydrate. There, hydrocarbon gases have methane contents ranging from 21 to 97%, with δ 13 C values ranging from − 29 to − 57‰. At a few locations, where the gas hydrate contains a mixture of microbial and thermal methane, microbial methane is always dominant. Continental gas hydrate, identified in Alaska and Russia, also has hydrocarbon gases composed of > 99% methane, with carbon-isotopic compositions ranging from − 41 to − 49‰. These gas hydrate deposits also contain a mixture of microbial and thermal methane, with thermal methane likely to be dominant.

Organic Geochemistry↗
USGS1980

Ocean eddy structure by satellite radar altimetry required for iceberg towing

Models for the towing of large tabular icebergs give towing speeds of 0.5 knots to 1.0 knots relative to the ambient near surface current. Recent oceanographic research indicates that the world oceans are not principally composed of large steady-state current systems, like the Gulf Stream, but that most of the ocean momentum is probably involved in intense rings, formed by meanders of the large streams, and in mid-ocean eddies. These rings and eddies have typical dimensions on the order of 200 km with dynamic height anomalies across them of tens-of-centimeters to a meter. They migrate at speeds on the order of a few cm/sec. Current velocities as great as 3 knots have been observed in rings, and currents of 1 knot are common. Thus, the successful towing of icebergs is dependent on the ability to locate, measure, and track ocean rings and eddies. To accomplish this systematically on synoptic scales appears to be possible only by using satelliteborne radar altimeters. Ocean current and eddy structures as observed by the radar altimeters on the GEOS-3 and Seasat-1 satellites are presented and compared. Several satellite programs presently being planned call for flying radar altimeters in polar or near-polar orbits in the mid-1980 time frame. Thus, by the time tows of large icebergs will probably be attempted, it is possible synoptic observations of ocean rings and eddies which can be used to ascertain their location, size, intensity, and translation velocity will be a reality.

Cold Regions Science and Technology↗
USGS1990

The geology of selected peat-forming environments in temperate and tropical latitudes

We studied peat in several geologic and climatic settings: (1) a glaciated terrain in cold-temperate Maine and Minnesota, U.S.A.; (2) an island in a temperate maritime climate in the Atlantic Ocean off the coast of Maine, U.S.A., where sea level is rising rapidly and changing the environment of peat accumulation; (3) swamps along the warm-temperate U.S. Atlantic and Gulf Coastal Plains, where sea level has changed often, thus creating sites for accumulation; and (4) in a tropical climate along the coast of Sarawak, Malaysia, and the delta of the Batang Hari River, Sumatra, Indonesia (Figs. 1 and 2). With the exception of the deposits on the Atlantic and Gulf Coastal Plains, most of the deposits described are domed bogs in which peat accumulation continued above the surface of the surrounding soil. The bogs of the U.S. Atlantic and Gulf Coastal Plains have almost level surfaces. All domed bogs are not entirely ombrotrophic (watered only from precipitation); multidomed bogs that rise from irregular or hilly surfaces may be crossed by streams that supply water to the bogs. The geologic processes or organic sedimentation, namely terrestrialization and paludification, are similar in all peat deposits considered here. Differences in geomorphology affecting the quantity and that quality of peat that has ash contents of less than 25%, which are desirable for commercial purposes, depend chiefly on: (1) high humidity, which is favorable to luxuriant growth of peat-forming vegetation; (2) a depositional setting that permits extensive accumulation relatively free from inorganic contamination from sea water and streams and from dust and volcanic ash; and (3) a stable regional water table that controls the rate of decomposition under aerobic conditions and protects the deposit against the ravages of fire. Differences in peat textures are due to the type of vegetation and to the degree of decomposition. The rate of decomposition is largely the result of the amount of oxidation and aerobic microbial activity. Stratigraphic distribution of various textures and amounts of inorganic components within a peat deposit is largely determined by the vertical positions occupied by peat-forming environments, such as pond, marsh, swamp and heath where vegetation accumulated, and the depth to zones of unoxygenated water. Peat also differs in the rate of accumulation. On the basis of carbon-14 dating, an estimated 8 m of peat in the tropical Batang Hari River deposit in Sumatra has been accumulating at the rate of about 1.5 m/1,000 yr, whereas peat in the cold-temperate deposit in Maine has been accumulating at the rate of 0.66 m/1,000 yr. Accumulation rates in domed deposits such as these are affected not only by factors controlling volume of biomass and aerobic decay but also by stream erosion and fires that remove peat. Such disconformities (see Fig. 2) within the deposit may be recognized by sudden vertical changes in degree of decomposition and/or the presence of charcoal. The trace-element content of peat deposits is affected by the environments of their settings. Samples of peat that have an ash content of less than 25% dry weight and that are from small, almost level swamp deposits along the Atlantic Coastal Plain of North Carolina were compared with similar samples from small domed bogs in Maine, a glaciated area. Samples from Nort Carolina, which are from deposits in thick fluvial and nearshore marine sediments far from the bedrock source, are generally higher in Ti, Cr and Pb. The Maine samples from deposits in glacial drift close to the bedrock source contain more Zn, Mn, P, Ca, Na and Fe. The kind and amount of trace elements within the deposits appear to relate largely to depositional setting, to kinds of bedrock source, and to the modes of transportation from source to peat swamp. Trace-element concentrations in the extensive Sumatra peat deposit, which represents a potentially commercial coal bed, are similar to those found in Appalachian coals except for As and Au, which are higher in the former. This similarity most likely implies that geochemical controls on mineral matter controlled the concentrations in both. Most peat deposits found in the world today are not precursors of economic coal beds because they are too local in extent, lack beds of commercial-quality peat greater than 6 m thick, and/or are too far from sea level to be rapidly by marine or marginal marine sediments before destruction by erosion and decomposition. However, the two domed deposits in Sarawak and Sumatra described above are parts of extensive, thick, low-sulfur, fuel-quality peat deposits, which have bases below the levels of rivers on coastal deltas. These are likely to be preserved in their lower part and to become precursors of tropical coal seams of potential economic importance. The lenticular and tabular peat deposits of the Atlantic and Gulf Coastal Plains, which have little chance of survival, have features resembling those in Tertiary peat deposits in alluvial settings of western North America. The quality, shape, and extent of modern and ancient peat deposits are controlled by the same factors - humidity, vegetation type, ground- and surface-water regimes, and physiographic and geologic setting. Thus, a study of modern peat deposits may help in studies of the areal distribution and the thickness and quality of ancient coal beds.

International Journal of Coal Geology↗