Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Structure”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78Linked to original sources
USGS2014

Petrology and structure of the Moa Chromite district, Oriente Province, Cuba

Chromite deposits In the Moa district, on the north coast of Oriente Province, Cuba, form one facies of the ultramafic complex in which they occur. Two planar structures, one a compositional layering due to variations in the relative proportions of olivine, pyroxene, plagioclase feldspar, and chromite, and the other a foliation caused by the orientation of pyroxene crystals in peridotite, are in general parallel, but diverge in a few places. Dips are fairly constant, being moderate to the northwest over most of the area, but sharp reversals occur immediately adjacent to irregularities in the chromite deposits. Two prominent joint sets are present: (1) Cross joints striking parallel to the strike of the foliation and dipping approximately at right angles to it; and (2) longitudinal joints striking parallel to the direction of dip of the foliation and nearly vertical. Gabbro dikes follow the first set, chrysotlle veins the second. Within the ore bodies dikes are commonly coarser‐grained, larger, and far more abundant than in peridotite; they enclose coarse, angular fragments of chromite. ©1947. American Geophysical Union. All Rights Reserved.

Eos, Transactions, American Geophysical Union↗
USGS2014

Thrust faults and related structures in eastern Cuba

Detailed areal mapping in central Camagüey Province and reconnaissance mapping in northern and eastern Oriente Province, Cuba, have revealed two major structural zones: (1) A zone of intense deformation, including thrust faulting, which lies north of the geographic axis of the island; and (2) a belt of domical mountains bounded on the north by Nipe Bay and the coast, and on the south by the Cauto trough and Guantilnamo basin. In Camagüey, extensive masses of serpentine and overlying tuffs have been complexly folded and overridden from the north by a block, at least 25 miles long, of limestones that form the Sierra de Cubitas and Sierra de Camaján. The overthrust carried a northern fades of Cretaceous and Eocene limestones over a southern fades of tuffaceous rocks of similar age, and had a displacement of at least six miles. In places serpentine was thrust over younger formations, and most of the shearing in the serpentine is attributed to diastrophism. A thrust zone exposed in Loma La Vigía, 15 miles north of Holguín, suggests a similar tectonic history for northern Oriente Province. Chaotic giant breccias that include waterlaid debris indicate that the overthrusts moved across the ancient land surface in both Camagüey and Oriente districts. The folding apparently began in the Cretaceous and culminated in overthrusting during early middle Eocene time. Post‐Eocene deformation appears to be limited to warping or doming to maximum angles of about 20 degrees. The zone of domical mountains is somewhat more than 100 miles long from east to west by 25 to 30 miles wide, and comprises three main units: (1) the Sierra de Nipe and (2) Sierra del Cristal domes, principally of serpentine; and (3) the Cuchillas uplift, which includes the Cuchillas de Toar and Sierra de Purlal, composed of serpentine and pre‐serpentine rocks. These uplifts are overlapped progressively on all sides by sediments ranging in age from Upper Cretaceous to Oligocene and Miocene, the older beds in places being highly folded. The mountains owe their present relief of 2000 to 4000 feet to the doming of an extensive erosion surface in the late Pliocene or early Pleistocene. The north and east flanks of the Cuchillas uplift extend below sea level, and drowned streams and elevated coral reefs show regional instability since the last major doming. ©1947. American Geophysical Union. All Rights Reserved.

Eos, Transactions, American Geophysical Union↗
USGS1993

Seismological mapping of fine structure near the base of the Earth's mantle

The Earth's core–mantle boundary (CMB) juxtaposes liquid iron and crystalline silicates, and is a region of large vertical thermal gradients. The D" region, which extends up to 200–300 km above the CMB, often has elevated shear-wave velocity and suggestions of lateral variations in structure 1 . Recent improvements in our ability to assemble and analyse records from regional seismic networks have allowed us to examine long profiles of travel times, amplitudes and waveforms from more than a thousand short-period seismometers 2 . We observe, across Canada and the United States, P waves that have grazed the CMB from the powerful nuclear test in Lop Nor, China, on 21 May 1992. First-arrival travel times and large secondary arrivals are consistent with a 1.5% compressional velocity increase with depth ∼ 130 km above the CMB—about half the thickness of D" in this locality 3 . Our observations, together with evidence for the absence of such a thin, fast layer in neighbouring regions, suggest the presence of lateral heterogeneity in composition or phase at the base of the mantle.

Nature↗
USGS2023

Permafrost microbial communities and functional genes are structured by latitudinal and soil geochemical gradients

Permafrost underlies approximately one quarter of Northern Hemisphere terrestrial surfaces and contains 25–50% of the global soil carbon (C) pool. Permafrost soils and the C stocks within are vulnerable to ongoing and future projected climate warming. The biogeography of microbial communities inhabiting permafrost has not been examined beyond a small number of sites focused on local-scale variation. Permafrost is different from other soils. Perennially frozen conditions in permafrost dictate that microbial communities do not turn over quickly, thus possibly providing strong linkages to past environments. Thus, the factors structuring the composition and function of microbial communities may differ from patterns observed in other terrestrial environments. Here, we analyzed 133 permafrost metagenomes from North America, Europe, and Asia. Permafrost biodiversity and taxonomic distribution varied in relation to pH, latitude and soil depth. The distribution of genes differed by latitude, soil depth, age, and pH. Genes that were the most highly variable across all sites were associated with energy metabolism and C-assimilation. Specifically, methanogenesis, fermentation, nitrate reduction, and replenishment of citric acid cycle intermediates. This suggests that adaptations to energy acquisition and substrate availability are among some of the strongest selective pressures shaping permafrost microbial communities. The spatial variation in metabolic potential has primed communities for specific biogeochemical processes as soils thaw due to climate change, which could cause regional- to global- scale variation in C and nitrogen processing and greenhouse gas emissions.

The ISME Journal↗
USGS2019

Genetic structure of Mycoplasma ovipneumoniae informs pathogen spillover dynamics between domestic and wild Caprinae in the western United States

Spillover diseases have significant consequences for human and animal health, as well as wildlife conservation. We examined spillover and transmission of the pneumonia-associated bacterium Mycoplasma ovipneumoniae in domestic sheep, domestic goats, bighorn sheep, and mountain goats across the western United States using 594 isolates, collected from 1984 to 2017. Our results indicate high genetic diversity of M. ovipneumoniae strains within domestic sheep, whereas only one or a few strains tend to circulate in most populations of bighorn sheep or mountain goats. These data suggest domestic sheep are a reservoir, while the few spillovers to bighorn sheep and mountain goats can persist for extended periods. Domestic goat strains form a distinct clade from those in domestic sheep, and strains from both clades are found in bighorn sheep. The genetic structure of domestic sheep strains could not be explained by geography, whereas some strains are spatially clustered and shared among proximate bighorn sheep populations, supporting pathogen establishment and spread following spillover. These data suggest that the ability to predict M. ovipneumoniae spillover into wildlife populations may remain a challenge given the high strain diversity in domestic sheep and need for more comprehensive pathogen surveillance.

Arizona, California, Colorado, Idaho, Kansas, Mont↗
USGS2012

Structure, spectroscopy and dynamics of layered H2O and CO2 ices

Molecular dynamics simulations of structural, spectroscopic and dynamical properties of mixed water–carbon dioxide (H 2 O–CO 2 ) ices are discussed over temperature ranges relevant to atmospheric and astrophysical conditions. The simulations employ multipolar force fields to represent electrostatic interactions which are essential for spectroscopic and dynamical investigations. It is found that at the water/CO 2 interface the water surface acts as a template for the CO 2 component. The rotational reorientation times in both bulk phases agree well with experimental observations. A pronounced temperature effect on the CO 2 reorientation time is observed between 100 K and 200 K. At the interface, water reorientation times are nearly twice as long compared to water in the bulk. The spectroscopy of such ices is rich in the far-infrared region of the spectrum and can be related to translational and rotational modes. Furthermore, spectroscopic signatures mediated across the water/CO 2 interface are found in this frequency range (around 440 cm −1 ). These results will be particularly important for new airborne experiments such as planned for SOFIA.

Physical Chemistry Chemical Physics↗
USGS1986

X-ray crystallographic and tungsten-183 nuclear magnetic resonance structural studies of the [M4(H2O)2(XW9O34) 2]10- heteropolyanions (M = COII or Zn, X = P or As)

The crystal structures of K10[Co4(H2O)2(PW9O 34)2]??22H2O (1) and isomorphous K10[Zn4(H2O)2(AsW9O 34)2]??23H2O (2) have been determined {Mo-K?? radiation, space group P21/n, Z = 2; (1) a = 15.794(2), b = 21.360(2), c = 12.312(1) A??, ?? = 91.96??, R = 0.084 for 3 242 observed reflections [I ??? 3??(I)]; (2) a = 15.842(4), b = 21.327(5), c = 12.308(4) A??, ?? = 92.42(4)??, R = 0.066 for 4 675 observed reflections [F ??? 3??(F)]}. The anions have crystallographic symmetry 1 and non-crystallographic symmetry very close to 2/m (C2h). Each consists of two [XW9O34]9- moieties [??-B isomers; X = P (1) or As (2)] linked via four CoIIO6 or ZnO6 groups. Two Co or Zn atoms each carry a water ligand. The 183W n.m.r. spectra of the anions [Zn4(H2O)2(XW9O34) 2]10- (X = P or As) confirm that the anions retain 2/m symmetry in aqueous solution. Homonuclear coupling constants between 183W atoms are 5.8-9.0 Hz for adjacent WO6 octahedra sharing edges, and 19.6-25.0 Hz for octahedra sharing corners.

Journal of the Chemical Society, Dalton Transactio↗
USGS2003

Impact of structural and autocyclic basin-floor topography on the depositional evolution of the deep-water Valparaiso forearc basin, central Chile

The Valparaiso Basin constitutes a unique and prominent deep-water forearc basin underlying a 40-km by 60-km mid-slope terrace at 2.5-km water depth on the central Chile margin. Seismic-reflection data, collected as part of the CONDOR investigation, image a 3-3.5-km thick sediment succession that fills a smoothly sagged, margin-parallel, elongated trough at the base of the upper slope. In response to underthrusting of the Juan Ferna??ndez Ridge on the Nazca plate, the basin fill is increasingly deformed in the seaward direction above seaward-vergent outer forearc compressional highs. Syn-depositional growth of a large, margin-parallel monoclinal high in conjunction with sagging of the inner trough of the basin created stratal geometries similar to those observed in forearc basins bordered by large accretionary prisms. Margin-parallel compressional ridges diverted turbidity currents along the basin axis and exerted a direct control on sediment depositional processes. As structural depressions became buried, transverse input from point sources on the adjacent upper slope formed complex fan systems with sediment waves characterising the overbank environment, common on many Pleistocene turbidite systems. Mass failure as a result of local topographic inversion formed a prominent mass-flow deposit, and ultimately resulted in canyon formation and hence a new focused point source feeding the basin. The Valparaiso Basin is presently filled to the spill point of the outer forearc highs, causing headward erosion of incipient canyons into the basin fill and allowing bypass of sediment to the Chile Trench. Age estimates that are constrained by subduction-related syn-depositional deformation of the upper 700-800m of the basin fill suggest that glacio-eustatic sea-level lowstands, in conjunction with accelerated denudation rates, within the past 350 ka may have contributed to the increase in simultaneously active point sources along the upper slope as well as an increased complexity of proximal depositional facies.

Basin Research↗
USGS1998

Three-dimensional seismic structure and moment tensors of non-double-couple earthquakes at the Hengill-Grensdalur volcanic complex, Iceland

The volcanic and geothermal areas of Iceland are rich sources of non-double-couple (non-DC) earthquakes. A state-of-the-art digital seismometer network deployed at the Hengill–Grensdalur volcanic complex in 1991 recorded 4000 small earthquakes. We used the best recorded of these to determine 3-D V P and V P /V S structure tomographically and accurate earthquake moment tensors. The V P field is dominated by high seismic wave speed bodies interpreted as solidified intrusions. A widespread negative (−4 per cent) V P /V S anomaly in the upper 4km correlates with the geothermal field, but is too strong to be caused solely by the effect of temperature upon liquid water or the presence of vapour, and requires in addition mineralogical or lithological differences between the geothermal reservoir and its surroundings. These may be caused by geothermal alteration. Well-constrained moment tensors were obtained for 70 of the best-recorded events by applying linear programming methods to P - and S -wave polarities and amplitude ratios. About 25 per cent of the mechanisms are, within observational error, consistent with DC mechanisms consistent with shear faulting. The other 75 per cent have significantly non-DC mechanisms. Many have substantial explosive components, one has a substantial implosive component, and the deviatoric component of many is strongly non-DC. Many of the non-DC mechanisms are consistent, within observational error, with simultaneous tensile and shear faulting. However, the mechanisms occupy a continuum in source-type parameter space and probably at least one additional source process is occurring. This may be fluid flow into newly formed cracks, causing partial compensation of the volumetric component. Studying non-shear earthquakes such as these has great potential for improving our understanding of geothermal processes and earthquake source processes in general.

Geophysical Journal International↗
USGS2001

Population structure of Atlantic salmon (Salmo salar L.): A range-wide perspective from microsatellite DNA variation

Atlantic salmon ( n = 1682) from 27 anadromous river populations and two nonanadromous strains ranging from south-central Maine, USA to northern Spain were genotyped at 12 microsatellite DNA loci. This suite of moderate to highly polymorphic loci revealed 266 alleles (5–37/locus) range-wide. Statistically significant allelic and genotypic heterogeneity was observed across loci between all but one pairwise comparison. Significant isolation by distance was found within and between North American and European populations, indicating reduced gene flow at all geographical scales examined. North American Atlantic salmon populations had fewer alleles, fewer unique alleles (though at a higher frequency) and a shallower phylogenetic structure than European Atlantic salmon populations. We believe these characteristics result from the differing glacial histories of the two continents, as the North American range of Atlantic salmon was glaciated more recently and more uniformly than the European range. Genotypic assignment tests based on maximum-likelihood provided 100% correct classification to continent of origin and averaged nearly 83% correct classification to province of origin across continents. This multilocus method, which may be enhanced with additional polymorphic loci, provides fishery managers the highest degree of correct assignment to management unit of any technique currently available.

Maine, New Bruinswick, Newfoundland and Labrador, ↗
USGS1987

Seismic response of dam with soil‐structure interaction

An analytical solution to the response of a long trapezoidal‐section dam on a foundation consisting of an elastic half‐space and subjected to simulated earthquake morion is developed. An optimum seismic design is achieved when the cross section of the dam is triangular. The effect of soil structure interaction is to lower the strain occurring in the dam.

Journal of Engineering Mechanics↗
USGS2012

Structural engineering research at the U.S. Geological Survey

The U.S. Geological Survey (USGS) is the lead federal agency of the National Earthquake Hazards Research Program (NEHRP) to conduct research related to earth sciences. Therefore, whether it is research on structures or other civil engineering disciplines, the subject matter of such research at USGS must meet NEHRP objectives. The most recent charges for USGS are outlined in the Draft of the NEHRP Strategic Plan (August 2000) which details several research issues on the effects of ground motions on built environment.

Conference Paper↗
USGS2012

Fish passage and abundance around grade control structures on incised streams

This paper summarizes research from separate studies of fish passage over weirs (Larson et al., 2004; Litvan, 2006; Litvan, et al., 2008a-c) and weir hydraulics (Papanicolaou and Dermisis, 2006; Papanicolaou and Dermisis, in press). Channel incision in the deep loess region of western Iowa has caused decreased biodiversity because streams have high sediment loads, altered flow regimes, lost habitat, and lost lateral connectivity with their former floodplains. In-stream grade control structures (GCS) are built to prevent further erosion, protect infrastructure, and reduce sediment loads. However, GCS can have a detrimental impact on fisheries abundance and migration, biodiversity, and longitudinal connectivity. Fish mark-recapture studies were performed on stretches of streams with and without GCS. GCS with vertical or 1:4 (rise/run) downstream slopes did not allow fish migration, but GCS with slopes ??? 1:15 did. GCS sites were characterized by greater proportions of pool habitat, maximum depths, fish biomass, slightly higher index of biotic integrity (IBI) scores, and greater macroinvertebrate abundance and diversity than non-GCS sites. After modification of three GCS, IBI scores increased and fish species exhibiting truncated distributions before were found throughout the study area. Another study examined the hydraulic performance of GCS to facilitate unimpeded fish passage by determining the mean and turbulent flow characteristics in the vicinity of the GCS via detailed, non-intrusive field tests. Mean flow depth (Y) and velocity (V) atop the GCS were critical for evaluating GCS performance. Turbulent flow measurements illustrated that certain GCS designs cause sudden constrictions which form eddies large enough to disorient fish. GCS with slopes ??? 1:15 best met the minimum requirements to allow catfish passage of a flow depth of ??? 0.31 m and a mean flow velocity of ??? 1.22 m/s. ?? 2009 ASCE.

Conference Paper↗
USGS2012

Evaluation of ground motion scaling methods for analysis of structural systems

Ground motion selection and scaling comprises undoubtedly the most important component of any seismic risk assessment study that involves time-history analysis. Ironically, this is also the single parameter with the least guidance provided in current building codes, resulting in the use of mostly subjective choices in design. The relevant research to date has been primarily on single-degree-of-freedom systems, with only a few studies using multi-degree-of-freedom systems. Furthermore, the previous research is based solely on numerical simulations with no experimental data available for the validation of the results. By contrast, the research effort described in this paper focuses on an experimental evaluation of selected ground motion scaling methods based on small-scale shake-table experiments of re-configurable linear-elastic and nonlinear multi-story building frame structure models. Ultimately, the experimental results will lead to the development of guidelines and procedures to achieve reliable demand estimates from nonlinear response history analysis in seismic design. In this paper, an overview of this research effort is discussed and preliminary results based on linear-elastic dynamic response are presented.

Conference Paper↗
USGS2008

Bedrock structural controls on the occurrence of sinkholes and springs in the Northern Great Valley Karst, Virginia and West Virginia

Recent geologic mapping at a scale of 1:24,000 has enabled a qualitative correlation of the occurrence of springs and sinkholes with bedrock structures and ground-water conditions in the northern Great Valley of Virginia and West Virginia. Sinkholes tend to be concentrated in zones of faulting, local minor folding, and clustered within susceptible bedrock units at the noses and axes of large plunging folds. Alignment of sinkholes mainly occurs along strike of bedding. Enhanced rock solution and conduit formation correlates with carbonate units of greater limestone purity and finer grain size, suggesting some lithologic control on karst formation. In addition, there is an apparent topographic correlation, with sinkholes usually formed in elevated and flat (<5 degrees slope) areas, as well as frequent sinkhole occurrence proximal to entrenched surface streams. Density of sinkhole occurrence tends to increase in areas where water-table fluctuations are large. Large perennial springs occur along faults, and may lie above base level streams indicating upward flow gradients particularly where cross-strike faults and joints intersect bedding planes and strike-parallel faults. Sinkhole formation also frequently occurs in areas proximal to entrenched surface streams, reflecting subsequent vadose-zone modification and excavation of sediment-filled conduits where downward ground-water flow gradients are most steep. Geologic evidence indicates that deep karst development may have taken place by rising fluids under confined (hypogenic) conditions in the distant geologic past in this region.

Virginia, West Virginia↗
USGS2012

Ultra-high resolution four dimensional geodetic imaging of engineered structures for stability assessment

We used ground-based Tripod LiDAR (T-LiDAR) to assess the stability of two engineered structures: a bridge spanning the San Andreas fault following the M6.0 Parkfield earthquake in Central California and a newly built coastal breakwater located at the Kaumālapa`u Harbor Lana'i, Hawaii. In the 10 weeks following the earthquake, we found that the surface under the bridge shifted 7.1 cm with an additional 2.6 cm of motion in the subsequent 13 weeks, which deflected the bridge's northern I-beam support 4.3 cm and 2.1 respectively; the bridge integrity remained intact. T-LiDAR imagery was collected after the completion of armored breakwater with 817 35-ton interlocking concrete armor units, Core-Locs®, in the summers of 2007, 2008 and 2010. We found a wide range of motion of individual Core-Locs, from a few centimeters to >110 cm along the ocean side of the breakwater, with lesser movement along the harbor side.

Conference Paper↗
USGS2006

Evaluation of multilayered pavement structures from measurements of surface waves

A method is presented for evaluating the thickness and stiffness of multilayered pavement structures from guided waves measured at the surface. Data is collected with a light hammer as the source and an accelerometer as receiver, generating a synthetic receiver array. The top layer properties are evaluated with a Lamb wave analysis. Multiple layers are evaluated by matching a theoretical phase velocity spectrum to the measured spectrum. So far the method has been applied to the testing of pavements, but it may also be applicable in other fields such as ultrasonic testing of coated materials. ?? 2006 American Institute of Physics.

Conference Paper↗