SEARCH · Geology Reports

Results for “Rocks & Minerals”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78Linked to original sources

USGS2014

The Rôle of volatiles in the formation of Virginia titanium deposits

The feldspathic rock with which the titanium deposits of Virginia are associated appears to be an anorthosite, although the plagioclase is somewhat more sodic than in normal anorthosites. That is, this rock shows evidence of having been introduced as a mush‐like mass of crystals and intersititial magma, and of undergoing very thorough crushing during introduction. This rook was later very thoroughly altered by hydrothermal solutions which migrated through the fractures in the feldspar rook and new minerals including the titanium minerals—rutile and ilmenite—were introduced. The elements introduced into the feldspathic rock ware TiO 2 FeO, MgO, P 2 O 5 , and F. The other elements that went into the formation of new minerals were derived from the feldspar originally present. There was a distinct order in the abstraction of the introduced elements from the carrying solutions, as shown by the zonal relatione of the secondary minerals. Ferrous iron was abstracted first in the formation of the ferromagnesian silicates and ilmenite. Magnesium and titanium, in the absence of iron, traveled farther from the source of the solutions and deposited rutile and magnesian silicates. At greater distances most of the introduced elements had been abstracted from the solutions but notwithstanding this the feldspar was extensively altered, but without any marked changes between the chemical composition of the original feldspar rook and the resulting altered rook. ©1934. American Geophysical Union. All Rights Reserved.

Virginia↗

USGS1955

Reconnaissance examination of the uranium deposits northeast of Winston, Broadwater County, Montana

Anomalous radioactivity and a yellow secondary uranium mineral tentatively identified as carnotite have been found in Tertiary sedimentary rocks about 3 miles northeast of Winston, Mont. The uranium is in tuffs and tuffaceous shales and particularly in beds rich in organic matter. Carnotite(?) was identified from three localities, principally coating fractures but in places part replacing organic material, and anomalous radioactivity without recognizable uranium minerals has been detected at four localities. Six of the seven localities are at approximately the same stratigraphic horizon. The deposits are virtually unexplored and consequently their size and grade are not known. Selected specimens assay as high as 0.36 percent eU. Exploitable deposits of uranium may be found in this area, as well as in similar areas of western Montana that are underlain by Tertiary tuffaceous rocks.

Trace Elements Memorandum↗

USGS1976

Carbon, hydrogen, and oxygen isotope studies of the regional metamorphic complex at Naxos, Greece

At Naxos, Greece, a migmatite dome is surrounded by schists and marbles of decreasing metamorphic grade. Sillimanite, kyanite, biotite, chlorite, and glaucophane zones are recognized at successively greater distances from the migmatite dome. Quartz-muscovite and quartz-biotite oxygen isotope and mineralogie temperatures range from 350 to 700°C. The metamorphic complex can be divided into multiple schist-rich (including migmatites) and marblerich zones. The δ 18 O values of silicate minerals in migmatite and schist units and quartz segregations in the schist-rich zones decrease with increase in metamorphic grades. The calculated δ 18 O H2O values of the metamorphic fluids in the schist-rich zones decrease from about 15‰ in the lower grades to an average of about 8.5‰ in the migmatite. The δD values of OH-minerals (muscovite, biotite, chlorite, and glaucophane) in the schist-rich zones also decrease with increase in grade. The calculated δD H2O values for the metamorphic fluid decrease from −5‰ in the glaucophane zone to an average of about −70‰ in the migmatite. The δD values of water in fluid inclusions in quartz segregations in the higher grade rocks are consistent with this trend. Theδ 18 O values of silicate minerals and quartz segregations in marble-rich zones are usually very large and were controlled by exchange with the adjacent marbles. The δD values of the OH minerals in some marble-rich zones may reflect the value of water contained in the rocks prior to metamorphism. Detailed data on 20 marble units show systematic variations of δ 18 O values which depend upon metamorphic grade. Below the 540°C isograd very steep δ 18 O gradients at the margins and large δ 18 O values in the interior of the marbles indicate that oxygen isotope exchange with the adjacent schist units was usually limited to the margins of the marbles with more exchange occurring in the stratigraphic bottom than in the top margins. Above the 540°C isograd lower δ 18 O values occur in the interior of the marble units reflecting a greater degree of recrystallization and the occurrence of Ca-Mg-silicates. Almost all the δ 13 C values of the marbles are in the range of unaltered marine limestones. Nevertheless, the δ 13 C values of most marble units show a general correlation with δ 18 O values. The CO 2 H 2 O "> CO 2 H 2 O mole ratio of fluid inclusions in quartz segregations range from 0.01 to 2. Theδ 13 C values of the CO 2 range from −8.0 to 3.6‰ and indicate that at some localities CO 2 in the metamorphic fluid was not in carbon isotopic equilibrium with the marbles.

Geochimica et Cosmochimica Acta↗

USGS1944

"Ribbon rock", an unusual beryllium-bearing tactite

The beryllium deposits at Iron Mountain, near the northern end of the Sierra Cuchillo in Sierra and Socorro Counties, New Mexico, are unusual products of contact metamorphism. They occur in irregular bodies of tactile formed by replacement of Paleozoic limestone, generally at or near contacts with small intrusive masses of rhyolite, aplite, and fine-grained granite. The metamorphism took place in mid-Tertiary time. Beryllium is present chiefly in the complex silicate minerals helvite and danalite, and is a minor constituent of the garnet grossularite, a boron-bearing idocrase, and chlorite. These minerals are known to occur in noteworthy concentrations in only one type of rock, a peculiar rhythmically layered variety of tactile to which the name "ribbon rock" is given. The structure of such tactite is very conspicuous, and appears in section as thin, finely crenulated bands of magnetite alternating with similar bands of silicate minerals and finely crystalline fluorite. Concentric banding about fluorite-rich pod-like masses is common. Bodies of "ribbon rock" range in size from inch-thick lenses to large masses amounting to thousands of tons; most appear to have been formed along contacts between re-crystallized limestone and massive magnetite-andradite tactite, chiefly by replacing fluids penetrating the limestone from fractures. The layered structure is interpreted as a diffusion effect.The formation of massive and "ribbon rock" tactites can be traced through a range of falling temperature from a stage characterized by deposition from iron-rich vapors to a stage in which hydrothermal solutions were dominant. Both vapors and liquids appear to have been acid. Reducing conditions undoubtedly existed during the latter part of the hydrothermal stage. The occurrence of beryllium in "ribbon rock," but not in typical massive tactite, may signify that its compounds in deposits at or near intrusive contacts are confined to rocks of hydrothermal origin. The occurrence of "ribbon rock" is suggested as a potentially useful clue for recognition of beryllium-bearing contact deposits elsewhere; at least two other occurrences of what apparently is "ribbon rock" have been described in the literature.

New Mexico↗

USGS1971

Evolution of thought on ore controls in east Tennessee

All early students of the zinc and barite deposits of East Tennessee, noting the geographic coincidence of the principal mining area with complex late Paleozoic geologic structure, concluded that (1) the ore-bearing breccias were produced by Appalachian tectonic forces and that (2) mineralizing solutions gained access through fault-produced channelways. In 1931, Ulrich suggested that the breccias were produced by collapse and fragmentation resulting from solution of the carbonate rocks. This idea was promptly rejected by most geologists, and for the next 15 years nearly all papers on these deposits contained refutations of Ulrich's hypothesis and "proof" of the late Paleozoic tectonic origin of the breccias. Recognition by Odell in 1950 of a spatial association between thinning of the lime-stone zone of the Kingsport Formation and the presence of ore bodies, plus the observation that all identifiable blocks in the breccias were displaced downward as much as 30 to 50 feet, led him to suggest that foundering of the rocks over solution-thinned zones produced the breccias. Hydrothermal fluids, rather than ordinary ground water, were thought to be the dissolving agent.Kendall, in 1960, described a stratified "varved" matrix with detrital sphalerite grains in many breccias at Jefferson City, in which lamination is parallel to bedding of the host Kingsport Formation, indicating that both brecciation and mineralization occurred while the rocks were horizontal. Ruskell about 1960 pointed out the similarity between cross sections of southwest Wisconsin ore bodies and those of East Tennessee when the latter were rotated to a horizontal position. Detailed studies of the post-Knox unconformity led to recognition of a paleokarst topography of considerable relief developed on this surface. Regional stratigraphic studies of the Knox Group by Harris demonstrated the probability of pre-Middle Ordovician exposure of the Kingsport somewhere to the north or northwest, providing a recharge area for ground waters at that time. Detailed mapping of ore bodies, barren areas, and related structures by the mining-company geologists, plus application of the principles of ground-water hydrology and rock mechanics, has led to the theory, generally accepted in the district, of solution-collapse origin of the breccias, probably during Ordovician time.

Tennessee↗

USGS2005

"Sour gas" hydrothermal jarosite: Ancient to modern acid-sulfate mineralization in the southern Rio Grande Rift

As many as 29 mining districts along the Rio Grande Rift in southern New Mexico contain Rio Grande Rift-type (RGR) deposits consisting of fluorite-barite??sulfide-jarosite, and additional RGR deposits occur to the south in the Basin and Range province near Chihuahua, Mexico. Jarosite occurs in many of these deposits as a late-stage hydrothermal mineral coprecipitated with fluorite, or in veinlets that crosscut barite. In these deposits, many of which are limestone-hosted, jarosite is followed by natrojarosite and is nested within silicified or argillized wallrock and a sequence of fluorite-barite??sulfide and late hematite-gypsum. These deposits range in age from ???10 to 0.4 Ma on the basis of 40Ar/39Ar dating of jarosite. There is a crude north-south distribution of ages, with older deposits concentrated toward the south. Recent deposits also occur in the south, but are confined to the central axis of the rift and are associated with modern geothermal systems. The duration of hydrothermal jarosite mineralization in one of the deposits was approximately 1.0 my. Most ??18OSO4-OH values indicate that jarosite precipitated between 80 and 240 ??C, which is consistent with the range of filling temperatures of fluid inclusions in late fluorite throughout the rift, and in jarosite (180 ??C) from Pen??a Blanca, Chihuahua, Mexico. These temperatures, along with mineral occurrence, require that the jarosite have had a hydrothermal origin in a shallow steam-heated environment wherein the low pH necessary for the precipitation of jarosite was achieved by the oxidation of H2S derived from deeper hydrothermal fluids. The jarosite also has high trace-element contents (notably As and F), and the jarosite parental fluids have calculated isotopic signatures similar to those of modern geothermal waters along the southern rift; isotopic values range from those typical of meteoric water to those of deep brine that has been shown to form from the dissolution of Permian evaporite by deeply circulating meteoric water. Jarosite ??34S values range from -24??? to 5???, overlapping the values for barite and gypsum at the high end of the range and for sulfides at the low end. Most ??34S values for barite are 10.6??? to 13.1???, and many ??34S values for gypsum range from 13.1??? to 13.9??? indicating that a component of aqueous sulfate was derived from Permian evaporites (??34 S=12??2???). The requisite H2SO4 for jarosite formation was derived from oxidation of H2S which was likely largely sour gas derived from the thermochemical reduction of Permian sulfate. The low ??34S values for the precursor H2S probably resulted from exchange deeper in the basin with the more abundant Permian SO42- at ???150 to 200 ??C. Jarosite formed at shallow levels after the pH buffering capacity of the host rock (typically limestone) was neutralized by precipitation of earlier minerals. Some limestone-hosted deposits contain caves that may have been caused by the low pH of the deep basin fluids due to the addition of deep-seated HF and other magmatic gases during periods of renewed rifting. Caves in other deposits may be due to sulfuric acid speleogenesis as a result of H2S incursion into oxygenated groundwaters. The isotopic data in these "sour gas" jarosite occurrences encode a record of episodic tectonic or hydrologic processes that have operated in the rift over the last 10 my. ?? 2004 Elsevier B.V. All rights reserved.

Chemical Geology↗

USGS2017

Using mineral geochemistry to decipher slab, mantle, and crustal input in the generation of high-Mg andesites and basaltic andesites from the northern Cascade Arc

To better understand the role of slab melt in the petrogenesis of North Cascades magmas, this study focuses on petrogenesis of high-Mg lavas from the two northernmost active volcanoes in Washington. High-Mg andesites (HMA) and basaltic andesites (HMBA) in the Cascade Arc have high Mg# [molar Mg/(Mg+Fe 2+ )] relative to their SiO 2 contents, elevated Nd/Yb, and are Ni- and Cr-enriched. The rock units examined here include the Tarn Plateau HMBA (51.8–54.0 wt% SiO 2 , Mg# 68–70) and Glacier Creek HMA (58.3–58.7 wt% SiO 2 , Mg# 63–64) from the Mount Baker Volcanic Field, and the Lightning Creek HMBA (54.8–54.6 SiO 2 , Mg# 69–73) from Glacier Peak. This study combines major and trace element compositions of minerals and whole rocks to test several petrogenetic hypotheses and to determine which, if any, are applicable to North Cascades HMA and HMBA. In the Tarn Plateau HMBA, rare earth element (REE) equilibrium liquids calculated from clinopyroxene compositions have high Nd/Yb that positively correlates with Mg#. This correlation suggests an origin similar to that proposed for Aleutian adakites, where intermediate, high Nd/Yb slab-derived melts interact with the overlying mantle to become Mg-rich, and subsequently mix with low Nd/Yb, mantle-derived mafic magmas with lower Mg#. In the Glacier Creek HMA, elevated whole-rock MgO and SiO 2 contents resulted from accumulation of xenocrystic olivine and differentiation processes, respectively, but the cause of high Nd/Yb is less clear. However, high whole-rock Sr/P (fluid mobile/fluid immobile) values indicate a mantle source that was fluxed by an enriched, hydrous slab component, likely producing the observed high Nd/Yb REE signature. The Lightning Creek HMBA is a hybridized rock unit with at least three identifiable magmatic components, but only one of which has HMA characteristics. Cr and Mg contents in Cr-spinel and olivine pairs in this HMA component suggest that its source is a strongly depleted mantle, and high whole-rock Sr/P values indicate mantle melting that was induced through hydration, likely adding the component responsible for the observed high Nd/Yb REE pattern. The elevated SiO 2 contents (54.6 wt%) of the HMA component resulted from differentiation or high degrees of partial melting of ultramafic material through the addition of H 2 O. Therefore the Lightning Creek HMBA is interpreted to have originated from a refractory mantle source that underwent melting through interaction with an enriched slab component. Our results indicate that in addition to slab-derived fluids, slab-derived melts also have an important role in the production of HMA and HMBA in the north Cascade Arc.

American Mineralogist↗

USGS2014

Succession of Laramide magmatic and magmatic-hydrothermal events in the Patagonia Mountains, Santa Cruz County, Arizona

This investigation of the space-time progression of magmatism and hydrothermal activity in the Patagonia Mountains of southern Arizona is based on field and paragenetic relationships, and on U-Pb and 40 Ar/ 39 Ar geochronology of igneous and hydrothermal minerals. The Patagonia Mountains consist of Precambrian, Paleozoic, and Mesozoic sedimentary, granitic, and volcanic rocks, Laramide volcanic rocks, and a core of Laramide intrusions that comprise the Patagonia Mountains batholith. Laramide igneous rocks and adjacent Paleozoic and Mesozoic rocks contain significant porphyry Cu-Mo deposits, Mo-Cu breccia pipes, Ag replacement deposits, and numerous other Cu-Pb-Zn-Ag replacement and vein deposits. Ages of igneous and hydrothermal minerals from 20 U-Pb and 52 40 Ar/ 39 Ar determinations define four magmatic and magmatic-hydrothermal events that formed the batholith and altered parts of it and adjacent rocks; cumulatively the events span at least 16 m.y., from ~74 to 58 Ma. The oldest event of this succession includes the 74 Ma Washington Camp stock and spatially associated Cu-Pb-Zn-Ag replacement deposits in Paleozoic carbonate rocks of the Washington Camp-Duquesne district. Eruption of 73 to 68 Ma volcanic rocks in the northern part of the range was the next youngest event, which coincides temporally with replacement and vein deposits in Paleozoic carbonate rocks at the Flux mine (~71 Ma). An event at 65 to 62 Ma is marked by emplacement of small-volume quartz monzonite, granodiorite, and diorite intrusions, formation of the Ventura breccia deposit in Jurassic granite at 65 to 64 Ma, and formation of other Pb-Zn-Ag-Cu replacement and vein deposits (~62 Ma; Blue Nose and Morning Glory). The Red Mountain porphyry Cu-Mo system is hosted by ~62 Ma granodiorite and Laramide volcanic rocks (73–68 Ma) at the northern end of the batholith. It includes a deep, chalcopyrite-bornite resource (~60 Ma) that is associated with potassic and sericitic alteration and a near-surface chalcocite-enargite resource (60 Ma) that is associated with advanced, supergene-enriched argillic alteration. The youngest event includes the Sunnyside porphyry Cu-Mo system and a Cu-Mo breccia deposit at Red Hill (Four Metals mine), both of which formed in large-volume quartz monzonite, granodiorite, quartz monzonite porphyry, and quartz feldspar porphyry (~61–59 Ma). Similar to the Red Mountain system, the Sunnyside system consists of a deep chalcopyrite resource that occurs in ~60 to 59 Ma quartz feldspar porphyry, and a near-surface, slightly younger (~59–58 Ma) enargite-chalcocite-tennantite resource that occurs in quartz feldspar porphyry, quartz monzonite porphyry, and Mesozoic rocks. The Red Hill Cu-Mo breccia deposit is hosted by large-volume quartz monzonite, granodiorite, and quartz monzonite porphyry (~61–59 Ma). Discrepancies between field and paragenetic relationships and some analytic ages at Sunnyside and Red Hill preclude precise dating of mineralization stages, and may reflect disturbance of isotope systems by multiple, co-spatial to juxtaposed intrusive and hydrothermal events, and/or by unrecognized intrusions. Numerous vein and replacement deposits at the northern end of the batholith, including the Hardshell Ag resource and the Three R supergene chalcocite resource, are distal deposits of the Sunnyside and Red Mountain systems. Small, ~61 to 59 Ma Cu-Mo deposits in large-volume intrusions in the southern part of the batholith consist of hydrothermal quartz, biotite, K-feldspar, muscovite, chalcopyrite, and molybdenite. The age span of magmatic and magmatic-hydrothermal events in the Patagonia Mountains, minimally 16 m.y., is comparable to that of certain other magmatic-hydrothermal successions that contain porphyry Cu-Mo systems. Magmatic-hydrothermal events of the Wasatch-Oquirrh igneous trend, Utah, and the Boulder batholith, Montana, both span ~17 m.y. and include the Bingham and Butte porphyry Cu-Mo, vein and replacement deposits, respectively. Plutons and mineral deposits in the Pima district, Arizona, which includes the porphyry Cu-Mo deposits at Sierrita-Esperanza, Mission-Pima-San Xavier North, and Twin Buttes, formed over an interval of ~14 m.y. The diversity of igneous and hydrothermal products likely reflects evolutionary processes occurring at multiple sites in the lithosphere and at different time scales from >10 m.y. to less than the geochronologic precision currently achievable.

Arizona↗

USGS2022

Perspectives on premetamorphic stratabound tourmalinites

Stratabound tourmalinites are metallogenically important rocks that locally show a close spatial association with diverse types of mineralization, especially volcanogenic massive sulfides (VMS) and clastic-dominated (CD) Zn-Pb deposits. These tourmalinite occurrences pan the geologic record from Eoarchean to Jurassic. Host lithologies are dominated by clastic metasedimentary rocks but in some areas include metavolcanic rocks, marble, or metaevaporites. Stratabound and stratiform (conformable) tourmalinites commonly display sedimentary structures such as graded beds, cross-beds, and rip-up clasts. In most cases, field and microtextural relationships are consistent with a synsedimentary to the early diagenetic introduction of boron as a precursor to tourmaline formation. Whole-rock geochemical data for major, trace, and rare earth elements (REE) provide valuable insights into tourmalinite origins. Al-normalized values relative to those for least-altered host metasedimentary rocks suggest that tourmalinites in proximal settings at or near hydrothermal vent sites characterized by high fluid/rock regimes (e.g., Sullivan Pb-Zn-Ag deposit, Canada) have very different signatures than those in low fluid/rock, distal settings (e.g., Broken Hill Pb-Zn-Ag deposit, Australia). The high fluid/rock regimes at Sullivan show large mass changes of +60 % for Mg and +180 % for Mn, as well as large variations in abundances of light and middle REE. In contrast, tourmalinite formation in low fluid/rock regimes yields minimal Al-normalized changes in major elements, trace elements, and REE. Boron isotope values of tourmalinite-hosted tourmaline vary widely from -26.1 to +27.5 ‰, and are attributed mainly to boron sources (e.g., sediments, evaporites) with generally minor influence from processes such as formational temperature, fluid/rock ratio, and secular variation in seawater δ 11 B values. Laterally extensive stratiform tourmalinites formed mainly by syngenetic or early diagenetic processes on or beneath the seafloor. The syngenetic process is attributed to the interaction of vented B-rich brines with aluminous minerals in sediments, whereas the diagenetic process involves the selective replacement of aluminous sediments by B-rich fluids. Modern examples of tourmalinites, as yet undiscovered, may exist in metalliferous sediments of the Red Sea and the eastern Pacific Ocean, in altered volcaniclastic sediments within active seafloor-hydrothermal systems of the South Pacific, and in hydrothermal mounds and vents associated with mafic sill complexes in extensional basins as in the North Sea and South China Sea. Stratabound tourmalinites that contain base-metal sulfides, high Mn concentrations (>1 wt. % MnO), or positive Eu anomalies can be valuable exploration guides for base-metal sulfide deposits in sedimentary and volcanic terranes.

Journal of Geosciences↗

USGS1999

Determination of chemical-constituent loads during base-flow and storm-runoff conditions near historical mines in Prospect Gulch, upper Animas River watershed, southwestern Colorado

Prospect Gulch is a major source of iron, aluminum, zinc, and other metals to Cement Creek. Information is needed to prioritize remediation and develop strategies for cleanup of historical abandoned mine sites in Prospect Gulch. Chemical-constituent loads were determined in Prospect Gulch, a high-elevation alpine stream in southwestern Colorado that is affected by natural acid drainage from weathering of hydro-thermally altered igneous rock and acidic metal-laden discharge from historical abandoned mines. The objective of the study was to identify metal sources to Prospect Gulch. A tracer solution was injected into Prospect Gulch during water-quality sampling so that loading of geochemical constituents could be calculated throughout the study reach. A thunderstorm occurred during the tracer study, hence, metal loads were measured for storm-runoff as well as for base flow. Data from different parts of the study reach represents different flow conditions. The beginning of the reach represents background conditions during base flow immediately upstream from the Lark and Henrietta mines (samples PG5 to PG45). Other samples were collected during storm runoff conditions (PG100 to PG291); during the first flush of metal runoff following the onset of rainfall (PG303 to PG504), and samples PG542 to PG700 were collected during low-flow conditions. During base-flow conditions, the percentage increase in loads for major constituents and trace metals was more than an order of magnitude greater than the corresponding 36 % increase in stream discharge. Within the study reach, the highest percentage increases for dissolved loads were 740 % for iron (Fe), 465 % for aluminum (Al), 500 % for lead (Pb), 380 % for copper (Cu), 100 % for sulfate (SO4), and 50 % for zinc (Zn). Downstream loads near the mouth of Prospect Gulch often greatly exceeded the loads generated within the study reach but varied by metal species. For example, the study reach accounts for about 6 % of the dissolved-Fe load, 13 % of the dissolved-Al load, and 18 % of the dissolved-Zn load; but probably contributes virtually all of the dissolved Cu and Pb. The greatest downstream gains in dissolved trace-metal loads occurred near waste-rock dumps for the historical mines. The major sources of trace metals to the study reach were related to mining. The major source of trace metals in the reach near the mouth is unknown, however is probably related to weathering of highly altered igneous rocks, although an unknown component of trace metals could be derived from mining sources The late-summer storm dramatically increased the loads of most dissolved and total constituents. The effects of the storm were divided into two distinct periods; (1) a first flush of higher metal concentrations that occurred soon after rainfall began and (2) the peak discharge of the storm runoff. The first flush contained the highest loads of dissolved Fe, total and dissolved Zn, Cu, and Cd. The larger concentrations of Fe and sulfate in the first flush were likely derived from iron hydroxide minerals such as jarosite and schwertmanite, which are common on mine dumps in the Prospect Gulch drainage basin. Peak storm runoff contained the highest measured loads of total Fe, and of total and dissolved calcium, magnesium, silica and Al, which were probably derived from weathering of igneous rocks and clay minerals in the drainage basin.

Colorado↗

USGS2011

Ages and sources of components of Zn-Pb, Cu, precious metal, and platinum group element deposits in the goodsprings district, Clark County, Nevada

The Goodsprings district, Clark County, Nevada, includes zinc-dominant carbonate replacement deposits of probable late Paleozoic age, and lead-dominant carbonate replacement deposits, copper ± precious metal-platinum group element (PGE) deposits, and gold ± silver deposits that are spatially associated with Late Triassic porphyritic intrusions. The district encompasses ~500 km 2 although the distribution of all deposits has been laterally condensed by late Mesozoic crustal contraction. Zinc, Pb, and Cu production from about 90 deposits was ~160,000 metric tons (t) (Zn > Pb >> Cu), 2.1 million ounces (Moz) Ag, 0.09 Moz Au, and small amounts of PGEs—Co, V, Hg, Sb, Ni, Mo, Mn, Ir, and U—were also recovered. Zinc-dominant carbonate replacement deposits (Zn > Pb; Ag ± Cu) resemble Mississippi Valley Type (MVT) Zn-Pb deposits in that they occur in karst and fault breccias in Mississippian limestone where the southern margin of the regional late Paleozoic foreland basin adjoins Proterozoic crystalline rocks of the craton. They consist of calcite, dolomite, sphalerite, and galena with variably positive S isotope compositions ( δ 34 S values range from 2.5–13‰), and highly radiogenic Pb isotope compositions ( 206 Pb/ 204 Pb >19), typical of MVT deposits above crystalline Precambrian basement. These deposits may have formed when southward flow of saline fluids, derived from basinal and older sedimentary rocks, encountered thinner strata and pinch-outs against the craton, forcing fluid mixing and mineral precipitation in karst and fault breccias. Lead-dominant carbonate replacement deposits (Pb > Zn, Ag ± Cu ± Au) occur among other deposit types, often near porphyritic intrusions. They generally contain higher concentrations of precious metals than zinc-dominant deposits and relatively abundant iron oxides after pyrite. They share characteristics with copper ± precious metal-PGE and gold ± silver deposits including fine-grained quartz replacement of carbonate minerals in ore breccias and relatively low S and Pb isotope values ( δ 34 S values vary from 0–~4‰; 206 Pb/ 204 Pb <18.5). Copper ± precious metal-PGE deposits (Cu, Co, Ag, Au, Pd, and Pt) consist of Cu carbonate minerals (after chalcocite and chalcopyrite) and fine-grained quartz that have replaced breccia clasts and margins of fissures in Paleozoic limestones and dolomites near porphyritic intrusions. Gold ± silver deposits occur along contacts and within small-volume stocks and dikes of feldspar porphyry, one textural variety of porphyritic intrusions. Lead isotope compositions of copper ± precious metal-PGE, gold ± silver, and lead-dominant carbonate replacement deposits are similar to those of Mojave crust plutons, indicating derivation of Pb from 1.7 Ga crystalline basement or from Late Proterozoic siliciclastic sedimentary rocks derived from 1.7 Ga crystalline basement. Four texturally and modally distinctive porphyritic intrusions are exposed largely in the central part of the district: feldspar quartz porphyry, plagioclase quartz porphyry, feldspar biotite quartz porphyry, and feldspar porphyry. Intrusions consist of 64 to 70 percent SiO 2 and variable K 2 O/Na 2 O (0.14–5.33) that reflect proportions of K-feldspar and albite phenocrysts and megacrysts as well as partial alteration to K-mica; quartz and biotite phenocrysts are present in several subtypes. Albite may have formed during emplacement of magma in brine-saturated basinal strata, whereas hydrothermal alteration of matrix, phenocrystic, and megacrystic feldspar and biotite to K-mica, pyrite, and other hydrothermal minerals occurred during and after intrusion emplacement. Small volumes of garnet-diopside-quartz and retrograde epidote-mica-amphibole skarn have replaced carbonate rocks adjacent to one intrusion subtype (feldspar-quartz porphyry), but alteration of carbonate rocks at intrusion contacts elsewhere is inconspicuous. Uranium-lead ages of igneous zircons vary inconsistently from ~ 180 to 230 Ma and are too imprecise to distinguish age differences among intrusion subtypes; most ages are 210 to 225 Ma, yielding a mean of 217 ± 1 Ma. K-Ar and 40 Ar/ 39 Ar ages of magmatic (plagioclase, biotite) and hydrothermal (K-mica) minerals span a similar range (183–227 Ma), demonstrating broadly contemporaneous intrusion emplacement and hydrothermal alteration but allowing for multiple Late Triassic magmatic-hydrothermal events. Imprecision and range of isotopic ages may have resulted from burial beneath Mesozoic and Tertiary strata and multiple intrusion of magmas, causing thermal disturbance to Ar systems and Pb loss from zircons in intrusions. Separate late Paleozoic (zinc-dominant carbonate replacement deposits) and Late Triassic (all other deposits) mineralizing events are supported by form, distribution, and host rocks of metal deposits, by hydrothermal mineral assemblages, isotope compositions, metal abundances, and metal diversity, and by small intrusion volumes. These characteristics collectively distinguish the Goodsprings district from larger intrusion related carbonate replacement districts in the western United States. They can be used to evaluate proximity to unexposed porphyritic intrusions associated with PGE and gold ± silver mineralization.

Nevada↗

USGS1979

Detection and mapping of hydrothermally altered rocks in the vicinity of the Comstock Lode, Virginia Range, Nevada, using enhanced Landsat images

The Virginia Range, immediately southeast of Reno, Nev., consists mainly of flows, breccias, and turfs of Miocene age. Most of these volcanic rocks are of intermediate composition; rhyodacite is the most common rock type. Basalt, rhyolite and rhyolite tuff, and tuffaceous sedimentary rocks of Miocene and Pliocene age also cover substantial areas in the range. Pre-Tertiary metasedimentary, metavolcanic, and granitic rocks are exposed in scattered inliers, mostly along the southern and eastern margins of the range. Several large areas and many small areas within the volcanic pile were subjected to hydrothermal alteration during and after the period of intermediate volcanic activity. Economic precious metal mineralization is spatially and temporally associated with the hydrothermal alteration in several areas. The most important deposit is the Comstock Lode, which produced 192 million troy ounces of silver and 8.3 million troy ounces of gold from epithermal veins (Bonham, 1969). The hydrothermally altered rocks include silicified, advanced argillic, montmorillonite-bearing argillic, and propylitic types. The first three types typically contain pyrite, and some propylitic rocks contain pyrite as well. Supergene oxidation of these pyritic rocks produces limonitic bleached rocks. The term 'limonite,' as used here, refers to any combination of the minerals hematite, goethite, and Jarosite. Where vegetation cover is sparse to moderate, these limonitic rocks are readily identified on Landsat images enhanced by the color-ratio composite technique developed by Rowan and others (1974), so the altered areas can be mapped. About 30 percent tree cover (here mainly pinyon pine) is sufficient to change the spectral signature of individual picture elements (pixels) enough so that limonitic materials can no longer be uniquely identified. As in all other areas where this technique has been applied, limonitic unaltered rocks with intermediate to high albedos have the same appearance on the color-ratio composite as limonitic altered rocks. This problem represents the most important limitation to the use of enhanced Landsat images for detection and mapping of hydrothermally altered rocks. Reflectance spectra of altered and unaltered rocks taken in the field in the Virginia Range show that most altered rocks have a conspicuous absorption band near 2.2 ?m produced by clay minerals or alunite, whereas unaltered rocks have no features in this spectral region. Thus spectral information for selected bands in the 1.1-2.5 ?m region may allow discrimination between limonitic altered and limonitic unaltered rocks (Rowan and others, 1977; Abrams and others, 1977; Rowan and Abrams, 1978). Another potential limitation is loss of spectral information on slopes with low effective sun angle. Although a minor problem in the Virginia Range, loss of information sufficient to preclude identification of limonitic altered rocks occurs with effective sun angle lower than 20-25 degrees. Thus, even at moderate latitudes substantial parts of areas with high topographic relief may be lost to observation.

Open-File Report↗

USGS2021

Hydrothermal alteration can result in pore pressurization and volcano instability

The collapse of a volcanic flank can be destructive and deadly. Hydrothermal alteration is common to volcanoes worldwide and is thought to promote volcano instability by decreasing rock strength. However, some laboratory studies have shown that not all alteration reduces rock strength. Our new laboratory data for altered rhyodacites from Chaos Crags (Lassen volcanic center, California, USA) show that pore- and crack-filling mineral precipitation can reduce porosity and permeability and increase strength, Young's modulus, and cohesion. A significant reduction in permeability, by as much as four orders of magnitude, will inhibit fluid circulation and create zones of high pore fluid pressure. We explored the consequences of pore fluid pressurization on volcano stability using large-scale numerical modeling. Upscaled physical and mechanical properties for hydrothermally altered rocks were used as input parameters in our modeling. Results show that a high-pore-pressure zone within a volcano increases volcano deformation and that increasing the size of this zone increases the observed deformation. Hydrothermal alteration associated with mineral precipitation, and increases to rock strength, can therefore promote pore pressurization and volcano deformation, increasing the likelihood of volcano spreading, flank collapses, and phreatic/phreatomagmatic explosions. We conclude that porosity-decreasing alteration, explored here, and porosity-increasing alteration can both promote volcano instability and collapse, but by different mechanisms. Hydrothermal alteration should therefore be monitored at volcanoes worldwide and incorporated into hazard assessments.

Geology↗

USGS2012

Sequestration of non-pure carbon dioxide streams in iron oxyhydroxide-containing saline repositories

Iron oxyhydroxide, goethite (α-FeOOH), was evaluated as a potential formation mineral reactant for trapping CO 2 in a mineral phase such as siderite (FeCO 3 ), when a mixture of CO 2 -SO 2 flue gas is injected into a saline aquifer. Two thermodynamic simulations were conducted, equilibrating a CO 2 -SO 2 fluid mixture with a NaCl-brine and Fe-rich rocks at 150 °C and 300 bar. The modeling studies evaluated mineral and fluid composition at equilibrium and the influence of pH buffering in the system. Results show siderite precipitates both in the buffered and unbuffered system; however, the presence of an alkaline pH buffer enhances the stability of the carbonate. Based on the model, an experiment was designed to compare with thermodynamic predictions. A CO 2 -SO 2 gas mixture was reacted in 150 ml of NaCl-NaOH brine containing 10 g of goethite at 150 °C and 300 bar for 24 days. Mineralogical and brine chemistry confirmed siderite as the predominant reaction product in the system. Seventy-six mg of CO 2 are sequestered in siderite per 10 g of goethite.

International Journal of Greenhouse Gas Control↗

USGS2017

Controls on pore types and pore-size distribution in the Upper Triassic Yanchang Formation, Ordos Basin, China: Implications for pore-evolution models of lacustrine mudrocks

Our main objectives are to (1) learn if pore-evolution models developed from marine mudrocks can be directly applied to lacustrine mudrocks, (2) investigate what controls the different pore types and sizes of Chang 7 organic matter (OM)-rich argillaceous mudstones of the Upper Triassic Yanchang Formation, and (3) describe the texture, fabric, mineralogy, and thermal maturity variation in the Chang 7 mudstones. Lacustrine mudstones from nine cored wells along a depositional dip in the southeastern Ordos Basin, China, were investigated. Helium porosimetry, nitrogen adsorption, and field-emission scanning electron microscopy of Ar-ion milled samples were applied. Measured average total porosity of samples from a proximal to distal transect ( ϕ = 5.0 % "> ϕ = 5.0 % ) is higher than those from the two adjacent cored wells ( ϕ = 2.3 % "> ϕ = 2.3 % ). This difference in porosity partly caused by differences in the clay mineral content implies that in the fluvial-deltaic-lacustrine depositional environment, reservoir quality can vary significantly in a short distance. Owing to the uneven distribution of the sample set from proximal to distal area, we mainly evaluate variations in the proximal setting. Results from nitrogen-gas adsorption experiments show that there are four distinct patterns of pore-size distribution within the Chang 7 member of the Yanchang Formation with no particular correlation with mineralogical composition and thermal maturity. The pore network within Chang 7 mudstones is dominated by OM-hosted pores, with a lesser abundance of interparticle and intraparticle pores. The size distribution of mineral-hosted pores within these mudstones is found to be closely related to the rock texture (sorting and grain size) and fabric. Mudstones with well-sorted grains and a higher percentage of coarser grains have more abundant mineral pores. The sizes of OM-hosted pores in these compaction-dominated lacustrine mudstones were one to two orders of magnitude smaller than those in the marine mudstones that display abundant early cementation.

Ordos basin↗

USGS2015

Association of anatase (TiO2) and microbes: unusual fossilization effect or a potential biosignature?

We combined microbial paleontology and molecular biology methods to study the Eyreville B drill core from the 35.3-Ma-old Chesapeake Bay impact structure,Virginia, USA. The investigated sample is a pyrite vein collected from the 1353.81-1353.89 m depth interval, located within a section of biotite granite. The granite is a pre-impact rock that was disrupted by the impact event. A search for inorganic (mineral) biosignatures revealed the presence of micron-size rod morphologies of anatase (TiO2) embedded in chlorite coatings on pyrite grains. Neither the Acridine Orange microbial probe nor deoxyribonucleic acid (DNA) extraction followed by polymerase chain reaction (PCR) amplifi cation showed the presence of DNA or ribonucleic acid (RNA) at the location of anatase rods, implying the absence of viable cells in the investigated area. A Nile Red microbial probe revealed the presence of lipids in the rods. Because most of the lipids are resistant over geologic time spans, they are good biomarkers, and they are an indicator of biogenicity for these possibly 35-Ma-old microbial fossils. The mineral assemblage suggests that rod morphologies are associated with low-temperature (<100 °C) hydrothermal alteration that involved aqueous fl uids. The temporal constraints on the anatase fossils are still uncertain because pre-impact alteration of the granite and postimpact heating may have provided identical conditions for anatase precipitation and microbial preservation.

Geological Society of America Bulletin↗

USGS2009

Geochemistry and geochronology of carbonate-hosted base metal deposits in the southern Brooks Range, Alaska: Temporal association with VMS deposits and metallogenic implications

The Brooks Range contains enormous accumulations of zinc and copper, either as VMS or sediment-hosted deposits. The Ruby Creek and Omar deposits are Cu-Co stratabound deposits associated with dolomitic breccias. Numerous volcanogenic Cu-Zn (+/-Ag, Au) deposits are situated ~20 km north of the Ruby Creek deposit. The carbonate-hosted deposits consist of chalcopyrite and bornite that fill open spaces, replace the matrix of the breccias, and occur in later cross-cutting veins. Cobaltiferous pyrite, chalcocite, minor tennantite-tetrahedrite, galena, and sphalerite are also present. At Ruby Creek, phases such as carrollite, renierite, and germanite occur rarely. The deposits have undergone post-depositional metamorphism (Ruby Creek, low greenschist facies; Omar, blueschist facies). The unusual geochemical signature includes Cu-Co +/- Ag, As, Au, Bi, Ge, Hg, Sb, and U with sporadic high Re concentrations (up to 2.7 ppm). New Re-Os data were obtained for chalcopyrite, bornite, and pyrite from the Ruby Creek deposit (analyses of sulfides from Omar are in progress). The data show extremely high Re abundances (hundreds of ppb, low ppm) and contain essentially no common Os. The Re-Os data provide the first absolute ages of ore formation for the Ruby Creek deposit and demonstrate that the Re-Os systematics of pyrite, chalcopyrite, and bornite are unaffected by greenschist metamorphism. The Re-Os data show that the main phase of Cu mineralization occurred at 384 +/-4.2 Ma, which coincides with zircon U-Pb ages from igneous rocks that are spatially and genetically associated with VMS deposits. This suggests a temporal link between regional magmatism and hydrothermal mineralization.

Alaska↗

USGS1989

Mineralogical studies of the nitrate deposits of Chile: VI. Hectorfloresite, Na9(IO3)(SO4)4, a new saline mineral

The new mineral hectorfloresite, known to occur in only one locality in the nitrate fields of northern Chile, consists of tiny prismatic crystals, generally less than 1 mm long and 0.2 mm in diameter, in cavities in dense nitrate ore consisting of saline-cemented silt, sand, and small rock fragments. The physical, optical and crystallographic properties of the new mineral are described. -from Authors

American Mineralogist↗