SEARCH · Geology Reports

Results for “Rock Products”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78Linked to original sources

USGS2007

Late Cenozoic Climate History of the Ross Embayment from the AND-1B Drill Hole: Culmination of Three Decades of Antarctic Margin Drilling

Because of the paucity of exposed rock, the direct physical record of Antarctic Cenozoic glacial history has become known only recently and then largely from offshore shelf basins through seismic surveys and drilling. The number of holes on the continental shelf has been small and largely confined to three areas (McMurdo Sound, Prydz Bay, and Antarctic Peninsula), but even in McMurdo Sound, where Oligocene and early Miocene strata are well cored, the late Cenozoic is poorly known and dated. The latest Antarctic geological drilling program, ANDRILL, successfully cored a 1285-m-long record of climate history spanning the last 13 m.y. from subsea-floor sediment beneath the McMurdo Ice Shelf (MIS), using drilling systems specially developed for operating through ice shelves. The cores provide the most complete Antarctic record to date of ice-sheet and climate fluctuations for this period of Earth’s history. The >60 cycles of advance and retreat of the grounded ice margin preserved in the AND-1B record the evolution of the Antarctic ice sheet since a profound global cooling step in deep-sea oxygen isotope records ~14 m.y.a. A feature of particular interest is a ~90-m-thick interval of diatomite deposited during the warm Pliocene and representing an extended period (~200,000 years) of locally open water, high phytoplankton productivity, and retreat of the glaciers on land.

Open-File Report↗

USGS2016

Time-slice maps showing age, distribution, and style of deformation in Alaska north of 60° N.

The structural architecture of Alaska is the product of a complex history of tectonism that occurred along the Cordilleran and Arctic margins of North America through interactions with ancient and modern ocean plates and with continental elements derived from Laurentia, Siberia, and Baltica. To unravel the tectonic history of Alaska, we constructed maps showing the age, distribution, structural style, and kinematics of contractional and penetrative extensional deformation in Alaska north of latitude 60° N. at a scale of 1:5,000,000. These maps use the Geologic Map of the Arctic (Harrison and others, 2011) as a base map and follow the guidelines in the Tectonic Map of the Arctic project (Petrov and others, 2013) for construction, including use of the International Commission on Stratigraphy time scale (Cohen and others, 2013) divided into 20 time intervals. We find evidence for deformation in 14 of the 20 time intervals and present maps showing the known or probable extent of deformation for each time interval. Maps and descriptions of deformational style, age constraints, kinematics, and information sources for each deformational episode are discussed in the text and are reported in tabular form. This report also contains maps showing the lithologies and structural geology of Alaska, a terrane map, and the distribution of tectonically important units including post-tectonic sedimentary basins, accretionary complexes, ophiolites, metamorphic rocks. These new maps show that most deformational belts in Alaska are relatively young features, having developed during the late Mesozoic and Cenozoic. The oldest episode of deformation recognized anywhere in Alaska is found in the basement of the Farewell terrane (~1.75 Ga). Paleozoic and early Mesozoic deformational events, including Devonian deformation in the Arctic Alaska terrane, Pennsylvanian deformation in the Alexander terrane, Permian deformation in the Yukon Composite (Klondike orogeny) and Farewell terranes (Browns Fork orogeny), Early and Late Jurassic deformation in the Peninsular-Wrangellia terranes, and Early Cretaceous deformation in northern Alaska (early Brookian orogeny) show that within-terrane amalgamation events occurred prior to assembly of Alaska. Widespread episodes of deformation in the Late Cretaceous and early Cenozoic, in contrast, affected multiple terranes, indicating they occurred during or following the time of assembly of most of Alaska. The primary deformational event in northern Alaska was the Late Jurassic and Early Cretaceous (early) Brookian orogeny, which affected most terranes north and west of the early Cenozoic Tintina, Victoria Creek, Kaltag, and Poorman dextral-slip faults in central Alaska. In southern Alaska, formation of the southern Alaska accretionary complex (Chugach, Prince William, Yakutat terranes) and associated magmatism in the Peninsular-Wrangellia terrane began near the Triassic-Jurassic boundary and continued episodically throughout the remainder of the Mesozoic and the Cenozoic. The collision of these terranes with the Farewell and Yukon Composite terranes in central Alaska is recorded by contractional deformation that emanated from the intervening basins in the Late Cretaceous. The boundary between northern and central Alaska is constrained to late Early Cretaceous but is enigmatic and not obviously marked by contractional deformation. Early Cenozoic shortening and transpressional deformation is the most widespread event recorded in Alaska and produced the widespread late Brookian orogenic event in northern Alaska. Middle and late Cenozoic shortening and transpression is significant in southern Alaska inboard of the underthrusting Yakutat terrane at the Pacific margin subduction zone as well as in northeastern Alaska.

Alaska↗

USGS2008

Ground-Water Flow in the Vicinity of the Ho-Chunk Nation Communities of Indian Mission and Sand Pillow, Jackson County, Wisconsin

An analytic element ground-water-flow model was constructed to help understand the ground-water-flow system in the vicinity of the Ho-Chunk Nation communities of Indian Mission and Sand Pillow in Jackson County, Wisconsin. Data from interpretive reports, well-drillers' construction reports, and an exploratory augering program in 2003 indicate that sand and gravel of varying thickness (0-150 feet[ft]) and porous sandstone make up a composite aquifer that overlies Precambrian crystalline rock. The geometric mean values for horizontal hydraulic conductivity were estimated from specific-capacity data to be 61.3 feet per day (ft/d) for sand and gravel, 6.6 ft/d for sandstone, and 12.0 ft/d for the composite aquifer. A ground-water flow model was constructed, the near field of which encompassed the Levis and Morrison Creeks Watershed. The flow model was coupled to the parameter-estimation program UCODE to obtain a best fit between simulated and measured values of ground-water levels and estimated Q50 flow duration (base flow). Calibration of the model with UCODE provided a ground-water recharge rate of 9 inches per year and a horizontal hydraulic conductivity of 13 ft/d for the composite aquifer. Using these calibrated parameter values, simulated heads from the model were on average within 5 ft of the measured water levels. In addition, these parameter values provided an acceptable base-flow calibration for Hay, Dickey, and Levis Creeks; the calibration was particularly close for Levis Creek, which was the most frequently measured stream in the study area. The calibrated model was used to simulate ground-water levels and to determine the direction of ground-water flow in the vicinity of Indian Mission and Sand Pillow communities. Backward particle tracking was conducted for Sand Pillow production wells under two pumping simulations to determine their 20-year contributing areas. In the first simulation, new production wells 6, 7, and 8 were each pumped at 50 gallons per minute (gal/min). In the second simulation, new production wells 6, 7, and 8 and existing production well 5 were each pumped at 50 gal/min. The second simulation demonstrated interference between the existing production well 5 and the new production wells when all were pumping at 50 gal/min.

Scientific Investigations Report↗

USGS1995

The Geysers-Clear Lake geothermal area, California - An updated geophysical perspective of heat sources

The Geysers-Clear Lake geothermal area encompasses a large dry-steam production area in The Geysers field and a documented high-temperature, high-pressure, water-dominated system in the area largely south of Clear Lake, which has not been developed. Both systems have been extensively studied with geophysical techniques, drilling, and geological mapping during the past 20 years. An updated view is presented of the geological/geophysical complexities of the crust in The Geysers-Clear Lake region in order to address key unanswered questions about the heat source and tectonics. Early geophysical interpretations used a gravity low centered in the area between Clear Lake and The Geysers to suggest that a large magma chamber existed at depths starting at about 7 km. This first-order assumption of a large magma chamber expressed in the gravity data was used as a guide in subsequent geophysical and geological interpretations. Drill-hole temperature evidence is strongly suggestive of a shallow, hot-intrusive body, but in this paper the complexities are documented of the geological and geophysical data sets that make it difficult to pinpoint the location of “magma” or hot, solidified intrusive material. Forward modeling, multidimensional inversions, and ideal body analysis of the gravity data, new electromagnetic sounding models, and arguments made from other geophysical data sets suggest that many of the geophysical anomalies have significant contributions from rock property and physical state variations in the upper 7 km and not from ”magma“ at greater depths. Regional tectonic and magmatic processes are analyzed to develop an updated scenario for pluton emplacement that differs substantially from earlier interpretations. In addition, a rationale is outlined for future exploration for geothermal resources in The Geysers-Clear Lake area.

Geothermics↗

USGS2002

Geohydrology of Southeastern Pennsylvania

Rapid population growth in southeastern Pennsylvania has increased the demand for ground water. In an effort to address the increased ground-water needs, a ground-water investigation in a 5,200-square-mile area of southeastern Pennsylvania was initiated. Information on the geohydrologic system of the area and the water-bearing capabilities of 51 geohydrologic units in six physiographic provinces or sections (Coastal Plain, Piedmont Upland, Piedmont Lowland, Gettysburg-Newark Lowland, South Mountain, and Reading Prong) has been summarized. Also included are statistical summaries by geohydrologic unit for well construction and discharge data (according to water use), as well as inorganic and radiochemical ground-water-quality data. Characteristics of the ground-water-flow system in the study area, as well as aquifer hydrologic properties, are related to geology, but can be modified by human development. Ground-water flow in the Coastal Plain Physiographic Province, is through intergranular or primary openings under either unconfined or confined aquifer conditions. Historically, ground-water flowed toward the Delaware and Schuylkill Rivers, but the original flow paths and water quality have been altered significantly by urbanization. In igneous and metamorphic rocks (Piedmont Upland, South Mountain, and Reading Prong), ground-water flows through a network of interconnected secondary openings (fractures, joints, cleavage planes). Ground water in the carbonate rocks (Piedmont Lowland) also flows through a network of secondary openings, but these openings have been enlarged by solution. In the Triassic sedimentary rocks (Gettysburg-Newark Lowland), thin tabular aquifers are separated by much thicker, strata-bound aquitards. The fractured Triassic bedrock forms a very complex, anisotropic, and heterogeneous aquifer with horizontal permeability much greater than vertical permeability. In general, ground-water flow in southeastern Pennsylvania takes place within local flow systems that discharge within days or weeks to adjacent stream valleys or surface-water bodies. Intermediate (South Mountain) and regional (Gettysburg-Newark Lowland) scale systems, however, in which residence times have been measured in months or years discharge to major streams or rivers that are located in different physiographic provinces or sections or tens of miles distant. Well depths, casing lengths, reported yields, and specific capacities can vary significantly by geohydrologic unit, use of well, and topographic setting. Wells drilled in the Weverton and Loudon Formations, undivided, and the Montalto Quartzite Member (South Mountain) have median well and casing lengths of 374 and 130 feet, respectively, significantly greater than in almost every other geohydrologic unit in the study area. Wells drilled in the Peach Bottom Slate and Cardiff Conglomerate, undivided (Piedmont Upland) are typically shallow, with a median well depth of 90 feet. Wells in the Marburg Schist (Piedmont Upland) have the lowest median casing length—5.5 feet. Wells in the Stonehenge Formation (Piedmont Lowland), the most productive unit in the study area, have a median reported yield of 200 gallons per minute and a median specific capacity of 27 gallons per minute per foot. The Cocalico Formation (Piedmont Lowland) is the least productive unit with a median reported well yield of 2.5 gallons per minute and a median specific capacity of 0.01 gallons per minute per foot. In general, high-demand wells are significantly deeper, use significantly more casing, and have significantly greater yields than domestic wells drilled in the same unit. Commonly, wells drilled in valleys will have greater reported yields and specific capacities than wells drilled in the same unit on slopes or hilltops. Except where adversely affected by human activities, the quality of ground water in southeastern Pennsylvania is suitable for most purposes. Yet several water-quality criteria are exceeded in many wells throughout the area. Water from 51 percent of 2,075 wells sampled had a pH higher or lower than the range specified in the U.S. Environmental Protection Agency (USEPA) secondary maximum contaminant level (SMCL). Of water samples analyzed, about 1 percent of 1,623 wells contained concentrations of chloride and 27 percent of 1,624 wells sampled contained concentrations of iron that exceeded the USEPA SMCL. Twenty-seven percent of 1,397 wells sampled contained water with manganese concentrations greater than the USEPA SMCL. Sulfate concentrations in the water of 3 percent of 1,699 wells sampled and total dissolved solids in the water from 10 percent of 1,590 wells sampled exceeded the USEPA SMCL. Concentrations of cadmium, chromium, cyanide, mercury, nickel, radium-226, selenium, and zinc in the water exceeded the USEPA maximum contaminant level (MCL) in less than 5 percent of the 183 to 620 wells sampled. Nine percent of 625 wells sampled contained water with lead concentrations that exceeded the USEPA MCL. Radon concentrations in the water of 92 percent of the 285 wells sampled exceeded the proposed USEPA MCL. Radium-228 in the water of 10 percent of the 240 wells sampled and nitrate in the water of 13 percent of 1,413 wells sampled exceeded the USEPA MCL. Gross-alpha activity in the water was measured only in the Chickies and Harpers Formations of the Piedmont Upland, with 23 percent of the 168 wells sampled exceeding the USEPA MCL.

Water-Resources Investigations Report↗

USGS2000

Geochemistry and geodynamics of a Late Cretaceous bimodal volcanic association from the southern part of the Pannonian Basin in Slavonija (Northern Croatia)

In this paper we present petrological and geochemical information on a bimodal basalt-rhyolite suite associated with A-type granites of Late Cretaceous age from the South Pannonian Basin in Slavonija (Croatia). Basalts and alkali-feldspar rhyolites, associated in some places with ignimbrites, occur in volcanic bodies that are interlayered with pyroclastic and fossiliferous Upper Cretaceus sedimentary rocks. The petrology and geochemistry of the basalts and alkali-feldspar rhyolites are constrained by microprobe analyses, major and trace element analyses including REE, and radiogenic and stable isotope data. Basalts that are mostly transformed into metabasalts (mainly spilites), are alkalic to subalkalic and their geochemical signatures, particularly trace element and REE patterns, are similar to recent back-arc basalts. Alkali-feldspar rhyolites have similar geochemical features to the associated cogenetic A-type granites, as shown by their large variation of Na 2 O and K 2 O (total 8–9%), very low MgO and CaO, and very high Zr contents ranging between 710 and 149 ppm. Geochemical data indicate an amphibole lherzolite source within a metasomatized upper mantle wedge, with the influence of upper mantle diapir with MORB signatures and continental crust contamination. Sr incorporated in the primary basalt melt had an initial 87 Sr/ 86 Sr ratio of 0.7039 indicating an upper mantle origin, whereas the 87 Sr/ 86 Sr ratio for the alkali-feldspar rhyolites and associated A-type granites is 0.7073 indicating an apparent continental crust origin. However, some other geochemical data favour the idea that they might have mainly originated by fractionation of primary mafic melt coupled with contamination of continental crust. Only one rhyolite sample appears to be the product of melting of continental crust. Geological and geodynamic data indicate that the basalt-rhyolite association was probably related to Alpine subduction processes in the Dinaridic Tethys which can be correlated with recent back-arc basins. The difference in geological and isotope ages between the bimodal basalt-rhyolite volcanism with A-type granite plutonism (72 Ma) and the final synkinematic S-type granite plutonism (48 Ma) can be taken as a lifetime of the presumed BARB system of the Dinaridic Tethys. Remnants of this presumed subduction zone can be traced for 300 km along the surrounding northernmost Dinarides.

Pannonian Basin↗

USGS1946

The quartz crystal deposits of western Arkansas

Extensive geological investigations of domestic deposits of quartz crystals were undertaken by the Geological Survey of the United States Department of the Interior in the fall of 1942 in response to the urgent demand for crystals for war purposes. The work was continued throughout 1943 and took survey geologists into some 20 states in which over 1,400 deposits or reports of deposits were examined. Of the numerous highly varied occurrences of quartz examined, only the deposits in western Arkansas, in the Piedmont and Blue Ridge provinces of Virginia, North Carolina and Georgia and the placer quartz of Mokelumne Hill, California, were of sufficient promise to warrant detailed work. Production in 1943 from these areas totaled slightly less than 4 tons of oscillator quartz, over 85 per cent of which came from Arkansas.The Arkansas deposits occur throughout the thick, deformed Paleozoic shales, sandstones, and cherts exposed along the central belt of the Ouachita Mountains. Steeply dipping fractures closely related to the major folds control the deposition of most quartz.Clear quartz is confined largely to the terminal parts of primary crystals, which have developed without disturbance or interference, are commonly elongate parallel to their C axes and are bounded by relatively simple forms. Deposition of silica during and subsequent to the fracturing of crystals resulted in the formation of complex crystals which are characterized by extensive optical twinning and lineage structures, and commonly are bounded by aggregates of the simpler crystal forms. The principal defects in all types of crystals are twinning, smokiness, cavities, solid inclusions and fractures.The Arkansas quartz deposits include veins, sheeted zones and stock-works. They are largely cavity fillings, apparently deposited by rising, attenuated, hydrothermal solutions, at relatively low temperatures and pressures. Minerals associated with the quartz, which constitutes 90 per cent or more of the cavity fillings, include dickite and carbonaceous material, calcite, adularia, and chlorite. The constituents of the cavity fillings could have been derived principally from magmatic sources or more probably from underlying rocks, with small additions from the rocks enclosing the cavities. The complex vein fabrics apparently resulting from intermittent regional deformation during the deposition of the quartz, and certain structural relations of the deposits, indicate that they were formed in the final stages of the Ouachita orogeny, probably in mid-Pennsylvanian time.

Arkansas↗

USGS2018

Quaternary sediment thickness and bedrock topography of the glaciated United States east of the Rocky Mountains

Beginning roughly 2.6 million years ago, global climate entered a cooling phase known as the Pleistocene Epoch. As snow in northern latitudes compacted into ice several kilometers thick, it flowed as glaciers southward across the North American continent. These glaciers extended across the northern United States, dramatically altering the landscape they covered. East of the Rocky Mountains, the ice coalesced into continental glaciers (called the Laurentide Ice Sheet) that at times blanketed much of the north-central and northeastern United States. To the west of the Laurentide Ice Sheet, glaciers formed in the mountains of western Canada and the United States and coalesced into the Cordilleran ice sheet; this relatively smaller ice mass extended into the conterminous United States in the northernmost areas of western Montana, Idaho, and Washington. Throughout the Pleistocene, landscape alteration occurred by (1) glacial erosion of the rocks and sediments; (2) redeposition of the eroded earth materials in a form substantially different from their source rocks, in terms of texture and overall character; and (3) disruption of preexisting drainage patterns by the newly deposited sediments. In many cases, pre-glacial drainage systems (including, for example, the Mississippi River) were rerouted because their older drainage courses became blocked with glacial sediment. The continental glaciers advanced and retreated many times across those areas. During each ice advance, or glaciation, erosion and deposition occurred, and the landscape was again altered. Through successive glaciations, the landscape and the bedrock surface gradually came to resemble their present configurations. As continental ice sheets receded and the Pleistocene ended, erosion and deposition of sediment (for example in stream valleys) continued to shape the landscape up to the present day (albeit to a lesser extent than during glaciation). The interval of time since the last recession of the glaciers is called the Holocene and, together with the Pleistocene, constitutes the Quaternary Period of geologic time; this publication characterizes the three-dimensional geometry of the Quaternary sediments and the bedrock surface that lies beneath. The pre-glacial landscape was underlain mostly by weathered bedrock generally similar in nature to that found in many areas of the non-glaciated United States. Glacial erosion and redeposition of earth materials produced a young, mineral-rich soil that formed the basis for the highly productive agricultural economy in the U.S. midcontinent. Extensive buried sands and gravels within the glacial deposits also provided a stimulus to other economic sectors by serving as high-quality aquifers supplying groundwater to the region’s industry and cities. An understanding of the three-dimensional distribution of these glacial sediments has direct utility for addressing various societal issues including groundwater quality and supply, and landscape and soil response to earthquake-induced shaking. The Quaternary sediment thickness map and bedrock topographic map shown here provide a regional overview and are intended to supplement the more detailed work on which they are based. Detailed mapping is particularly useful in populated areas for site-specific planning. In contrast, regional maps such as these serve to place local, detailed mapping in context; to permit the extrapolation of data into unmapped areas; and to depict large-scale regional geologic features and patterns that are beyond the scope of local, detailed mapping. They also can enhance the reader’s general understanding of the region’s landscape and geologic history and provide a source of information for regional decision making that could benefit by improved predictability of bedrock depth beneath the unconsolidated Quaternary sediments. To enable these maps to be analyzed in conjunction with other types of information, this publication also includes the map data in GIS compatible format.

Scientific Investigations Map↗

USGS2018

Near-solidus melts of MORB + 4 wt% H2O at 0.8 – 2.8 GPa applied to issues of subduction magmatism and continent formation

Experiments on MORB + 4 wt% H 2 O at 0.8–2.8 GPa and 700–950 °C (Liu in High pressure phase equilibria involving the amphibolite–eclogite transformation. PhD dissertation, Stanford University, Stanford, California, 1997; Liu et al. in Earth Planet Sci Lett 143:161–171, 1996) were reexamined for their major and trace element melt compositions and melting relations. Degree of melting diminishes at greater pressures, with corresponding evolution of melt from andesitic at the lowest pressures and hottest temperatures to high-silica rhyolitic at the greatest pressure and coolest temperature. Quartz contributes greatly to the production of near-solidus melts of basaltic eclogite, with the result that melt productivity falls markedly following quartz exhaustion. This limits the extent of melting attainable in the basaltic eclogite portions of sub-arc subducting plates to no more than ~ 2 × the modal wt% quartz in the mafic eclogite protolith. Synthesized residual mineral assemblages lack an epidote-series mineral at temperatures > 750 °C, and as a result, melts from the rutile eclogite and rutile-amphibole eclogite facies have elevated concentrations of light rare earth elements, U, Th, have elevated Ba, K, and Sr, high Sr/Y, and are strongly depleted in Nb, Y, and the heavy rare earth elements. Models of eclogite partial melt reacting with peridotite of the mantle wedge reproduce major and trace element characteristics of parental arc magmas so long as the proportions of infiltrating melt to peridotite are relatively high, consistent with channelized ascent. Melt mass is estimated to increase roughly three- to ten-fold, consistent with H 2 O concentrations of 3–7 wt% in the magmas produced by reaction. Partial melts of subducting basaltic eclogite are predicted to have positive Sr concentration anomalies, relative to Ce and Nd, that persist through melt-peridotite reactions. Primitive arc magmas commonly have positive Sr anomalies, whereas such anomalies are smaller in estimates of the bulk continental crust. Overall, Sr anomalies diminish passing from primitive to more evolved arc volcanic rocks, consistent with extensive mineral-melt differentiation (crystallization, partial remelting) involving plagioclase. On the order of 50 wt% differentiation would be necessary to eliminate Sr positive anomalies, based on geochemical variations in the Cascade and western Aleutian magmatic arcs. Loss to the mantle of cumulates and restites with high Sr anomalies, in abundances broadly equal to the mass of the preserved crust, would be required to form the continents via processes similar to present-day subduction magmatism.

Contributions to Mineralogy and Petrology↗

USGS2014

Significance of a near-source tephra-stratigraphic sequence to the eruptive history of Hayes Volcano, south-central Alaska

Bluffs along the Hayes River valley, 31 km northeast and 40 km downstream from Hayes Volcano, reveal volcanic deposits that shed new light on its eruptive history. Three thick (>10 cm) and five thin (<10 cm) tephra-fall deposits are dacitic in whole rock composition and contain high proportions of amphibole to pyroxene and minor biotite and broadly correlate to Hayes tephra set H defined by earlier investigators. Two basal ages for the tephra-fall sequence of 3,690±30 and 3,750±30 14 C yr B.P. are also consistent with the Hayes tephra set H timeframe. Distinguishing among Hayes tephra set H units is critical because the set is an important time-stratigraphic marker in south-central Alaska and this section provides a new reference section for Hayes tephra set H. Analysis of Fe-Ti oxide grains in the tephras shows promise for identifying individual Hayes deposits. Beneath the dacitic tephra sequence lies an older, poorly sorted tephra (tephra A) that contains dacite and rhyolite lapilli and whose basal age is 4,450±30 14 C yr B.P. Immediately below the tephra-fall sequence (Unit III) lies a series of mass-flow deposits that are rich in rhyodacitic clasts (Unit II). Below Unit II and possibly coeval with it, is a 20–30 m thick pumiceous pyroclastic-flow deposit (Unit I) that extends to the valley floor. Here informally named the Hayes River ignimbrite, this deposit contains pumice clasts of rhyolite with quartz, sanidine, plagioclase, and biotite phenocrysts, an assemblage that is unique among known Quaternary volcanic products of Hayes and other Alaskan volcanoes. Units I, II, and tephra A of Unit III represent at least two previously unrecognized eruptions of Hayes Volcano that occurred prior to ~3,700 yr B.P. No compositionally equivalent distal tephra deposits correlative with Hayes Volcano rhyodacites or rhyolites have yet been identified, perhaps indicating that some of these deposits are pre-Holocene, and were largely removed by glacial ice during the last ice age. More field and analytical work is needed to further refine the eruptive history of Hayes Volcano.

Alaska↗

USGS1981

Rare-earth element geochemistry of the island-arc volcanic rocks of Rabaul and Talasea, New Britain

The island-arc volcanic rocks of Rabaul and Talasea, New Britain, range in composition from basalt through rhyolite. Rare-earth elements have been determined by mass-spectrometric isotope dilution in 16 samples. Chondrite-normalized rare-earth element patterns are distinct for each volcanic center, but all are relatively flat (Ce/Yb E.F. = 1.1 to 3.0). Within each center, rare-earth element concentrations increase from basalt to dacite, and Eu anomalies become progressively more negative from basalt to dacite (Eu/Eu* = 1.0 to 0.8). Lavas inferred to contain cumulate phenocrysts show positive Eu anomalies (Eu/Eu* of up to 1.2). The observed variations are consistent with fractional crystallization of basalt or basaltic andesite by removal or accumulation of the observed phenocrysts, including olivine, plagioclase, pyroxene, and opaque minerals. Quantitative trace-element models for Talasea lavas indicate precipitation of 50 wt percent of phenocrysts from basalt to produce andesite and an additional 22 wt percent to produce dacite. A total-equilibrium model provides the best approximation to observed concentrations, implying that the process took place at a depth sufficient to allow slow cooling of the magma as precipitation proceeded. The “least fractionated” basalts and basaltic andesites are similar in rare-earth element pattern to those of corresponding type suites in other oceanic-island arcs, implying a widespread uniformity of source and process in the production of each magma type.

Geological Society of America Bulletin↗

USGS2015

Chesapeake Bay impact structure: A blast from the past

About 35 million years ago, a 2-mile-wide meteorite smashed into Earth in what is now the lower Chesapeake Bay in Virginia. The oceanic impact vaporized, melted, fractured, and displaced rocks and sediments and sent billions of tons of water, sediments, and rocks into the air. Glassy particles of solidified melt rock rained down as far away as Texas and the Caribbean. Large tsunamis affected most of the North Atlantic basin. The resulting impact structure is more than 53 miles wide and has a 23-mile-wide, filled central crater surrounded by collapsed sediments. Now buried by hundreds of feet of younger sediments, the Chesapeake Bay impact structure is among the 20 largest known impact structures on Earth. Since its discovery in the early 1990s, scientists have conducted deep drilling and geophysical surveys of the impact structure to find out more about its size, composition, structure, age, and biological effects and to understand its lingering influences on the regional groundwater system. These efforts culminated in the drilling of a 1-mile-deep, continuously sampled corehole in 2005 by an international group of scientists and agencies.

Chesapeake Bay↗

USGS2010

Timing, distribution, and volume of proximal products of the 2006 eruption of Augustine Volcano: Chapter 8 in The 2006 eruption of Augustine Volcano, Alaska

During and after the 2006 eruption of Augustine Volcano, we compiled a geologic map and chronology of new lava and flowage deposits using observational flights, oblique and aerial photography, infrared imaging, satellite data, and field investigations. After approximately 6 months of precursory activity, the explosive phase of the eruption commenced with two explosions on January 11, 2006 (events 1 and 2) that produced snow-rich avalanches; little or no juvenile magma was erupted. Seismicity suggests that a small lava dome may have extruded on January 12, but, if so, it was subsequently destroyed. A series of six explosions on January 13–14 (events 3–8) produced widespread but thin (0–30 cm) pyroclastic-current deposits on the upper flanks above 300 m altitude and lobate, 0.5- to 2-m-thick pyroclastic flows that traveled down most flanks of the volcano. Between January 14 and 17, a smooth lava lobe formed in the east half of the roughly 400-m-wide summit crater and was only partially covered by later deposits. An explosion on January 17 (event 9) opened a crater in the new lava dome and produced a ballistic fall deposit and pyroclastic flow on the southwest flank. During the interval from January 17 to 27, a rubbly lava dome effused. On January 27, explosive event 10 generated a pyroclastic current that left a deposit, rich in dense clasts, on the north-northwest flank. Immediately following the pyroclastic current, a voluminous 4.7-km-long pyroclastic flow swept down the north flank. Three more explosive blasts on January 27 and 28 produced unknown but likely minor on-island deposits. The cumulative volume of erupted material from the explosive phase, including domes, flows, and fall deposits (Wallace and others, this volume), was 30×10 6 m 3 dense-rock equivalent (DRE). The continuous phase of the eruption (January 28 through February 10) began with a 4-day period of nearly continuous block-and-ash flows, which deposited small individual flow lobes that cumulatively formed fans to the north and northeast of the summit. A single larger pyroclastic flow on January 30 formed a braided deposit on the northwest flank. Roughly 9×10 6 m 3 (DRE) of magma erupted during this period. Around February 2, the magma flux rate waned and a northward lava flow effused and reached a length of approximately 900 m by February 10. Approximately 11×10 6 m 3 (DRE) of magma erupted during the second half of the continuous phase. After a 23-day hiatus, lava effusion recommenced in early March (the effusive phase) and was accompanied by frequent (but volumetrically minor) block-and-ash flows. From March 7 to 14, extrusion increased markedly; two blocky lava-flow lobes, each tens of meters thick, moved down the north and northeast flank of the volcano; and a new summit lava dome grew to be ~70 m taller than the pre-2006 summit. This phase produced 26×10 6 m 3 (DRE) of lava. Active effusion had ceased about March 16, but, in April and May, three gravitational collapses from the west margin of the north lava flow produced additional block-and-ash flows. The basic sequence of the 2006 eruption closely matches that of eruptions in 1976 and 1986.

Alaska↗

USGS1957

Ground-water possibilities south of the Snake River between Twin Falls and Pocatello, Idaho

The Snake River Plain and tributary valleys south of the Snake River between Twin Falls and Pocatello, Idaho (here called the South Side area), contain about 180,000 acres of irrigated land, of which 145,000 acres is irrigated with surface water and 35,000 is irrigated wholly or partly with ground water. The area also contains more than 200,000 acres of arable land that is idle or used only for grazing because it lacks irrigation water. Most of the surface-water supply is already used or reserved, and some land now irrigated needs supplemental water. The climate of the area ranges from semiarid on the Snake River Plain to subhumid on higher mountains. The average annual precipitation at lowland stations ranges from about 9 to 12 inches. The principal sources of ground water are extrusive volcanic rocks of silicic to intermediate composition, basalt, and sand and gravel. Ground water occurs commonly under artesian conditions in the silicic to intermediate volcanic rocks and in sand and gravel tongues and lenses in lake beds. Basalt and alluvium commonly contain unconfined water. The area of this report is divided into 13 roughly defined ground-water districts, some of which are further divided into subdistricts. The known geologic and hydrologic factors of each area are summarized and a preliminary appraisal is made of the ground-water resources in relation to land resources and to the regimen of streams. The current state of development, proposed new developments, and ground-water potential of each division are discussed. The Dry Creek district is the most intensively irrigated area in Idaho in which wells furnish the water supply. Ground water occurs under both artesian and water-table conditions. More than 53,000 acre-feet of ground water was pumped in 1954. There are large areas of undeveloped arable land in the district, but pumping in some parts of the district currently is approaching or surpasses the perennial yield of the ground-water reservoirs. The Golden Valley district contains considerable arable land but, owing to the relatively great depth to water and the generally poor yield of wells, the prospects for extensive ground-water development are not promising. In the Oakley district ground water is pumped from alluvium to supplement surface water and to bring new land into production. The ground water will be fully exploited within a few years if the present rate of development by individual landowners continues. The total area of nonirrigated land far exceeds the amount that could be irrigated with indigenous ground water. Both artesian and unconfined water occur in the Burley district. Most existing wells tap unconfined water in the southern part where there are still large tracts of idle arable land. Pumping lifts are rather high. The South Walcott district contains a considerable acreage of arable land and is underlain by excellent aquifers. The effect that heavy pumping would have on the flow of the Raft and Snake Rivers and on seepage from Lake Walcott is Taot well understood. Presumably substantial pumping would be feasible without direct deleterious effects. The Raft River basin, including the Elba and Almo-Yost subbasins, is the largest district in the South Side area. Ground water occurs in both unconfined and artesian aquifers. Possibly as much as 150,000 acres of dry land is irrigable, but the ground-water supply presumably is sufficient to irrigate only a few thousand acres in addition to the approximately 40,000 now irrigated with surface and ground water. Pumping of wells at some locations would deplete the base flow of the Raft River and would be competitive with surface-water use. The United States Bureau of Reclamation has started construction of the Michaud Flats Irrigation Project in the Western Michaud Flats district. The adopted reclamation plan is to irrigate about 10,000 acres, using surface water pumped from American Falls Reservoir and ground water pumped from wells. Ground water in part of the district is tributary to the reservoir. Withdrawals of ground water will be compensated in part by the return of waste water to the reservoir and to the Snake River. The Eastern Michaud Flats district contains more arable land and has better aquifers than the Western Michaud Flats district, but pumping might reduce noticeably the discharge of ground water to the American Falls Reservoir. The Bureau of Indian Affairs plans to develop about 13,600 acres of Indian land with water stored in Palisades and American Falls Reservoirs. Virtually nothing is known about ground-water conditions in the Arbon and Rockland Valleys and in several small areas such as the Basin district, the Albion basin, and along the northern border of the Sublett Range. Preliminary studies have been made in three areas, the Dry Creek, Raft River, and Western. Michaud Flats districts. None has been studied comprehensively. The available data for each district are summarized in tabular form. Further investigations in the area are needed and should include accurate hydrologic mapping. Studies are needed of the sources and amounts of groundwater recharge, of the effects of ground-water withdrawals on the total water supply, and of numerous related problems.

Idaho↗

USGS2000

Magma storage and mixing conditions for the 1953-1974 eruption of Southwest Trident volcano, Katmai National Park, Alaska

Between 1953 and 1974, approximately 0.5 km 3 of andesite and dacite erupted from a new vent on the southwest flank of Trident volcano in Katmai National Park, Alaska, forming an edifice now known as Southwest (or New) Trident. Field, analytical, and experimental evidence shows that the eruption commenced soon after mixing of dacite and andesite magmas at shallow crustal levels. Four lava flows (58.3–65.5 wt% SiO 2 ) are the dominant products of the eruption; these contain discrete andesitic enclaves (55.8–58.9 wt% SiO 2 ) as well as micro- and macro-scale compositional banding. Tephra from the eruption spans the same compositional range as lava flows; however, andesite scoria (56–58.1 wt% SiO 2 ) is more abundant relative to dacite tephra, and is the explosively erupted counterpart to andesite enclaves. Fe–Ti oxide pairs from andesite scoria show a limited temperature range, clustered around 1000 °C. Temperatures from grains found in dacite lavas possess a wider range; however, cores from large (>100 μm) magnetite and coexisting ilmenite give temperatures of ∼890 °C, taken to represent a pre-mixing temperature for the dacite. Water contents from dacite phenocryst melt inclusions and phase equilibria experiments on the andesite imply that the two magmas last resided at a water pressure of 90 MPa, and contained ∼3.5 wt% H 2 O, equivalent to 3 km depth if saturated. Unzoned pyroxene and sodic plagioclase in the dacite suggest that it likely underwent significant crystallization at this depth; highly resorbed anorthitic plagioclase from the andesite suggests that it originated at greater depths and underwent relatively rapid ascent until it reached 3 km, mixed with dacite, and erupted. Diffusion profiles in phenocrysts suggest that mixing preceded eruption of earliest lava by approximately one month. The lack of a compositional gap in the erupted rock suite indicates that thorough mixing of the andesite and dacite occurred quickly, via disaggregation of enclaves, phenocryst transfer from one magma to another, and direct mixing of compositionally distinct melt phases.

Alaska↗

USGS2012

Assessing native and introduced fish predation on migrating juvenile salmon in Priest Rapids and Wanapum Reservoirs, Columbia River, Washington, 2009--11

Hydroelectric development on the mainstem Columbia River has created a series of impoundments that promote the production of native and non-native piscivores. Reducing the effects of fish predation on migrating juvenile salmonids has been a major component of mitigating the effects of hydroelectric development in the Columbia River basin. Extensive research examining juvenile salmon predation has been conducted in the lower Columbia River. Fewer studies of predation have been done in the Columbia River upstream of its confluence with the Snake River; the most comprehensive predation study being from the early 1990s. The Public Utility District No. 2 of Grant County, Washington initiated a northern pikeminnow removal program in 1995 in an attempt to reduce predation on juvenile salmonids. However, there has been no assessment of the relative predation within the Priest Rapids Project since the removal program began. Further, there is concern about the effects of piscivores other than northern pikeminnow ( Ptychocheilus oregonensis ), such as channel catfish ( Ictalurus punctatus ), smallmouth bass ( Micropterus dolomieu ), and walleye ( Sander vitreus , formerly Stizostedion vitreum ). The Public Utility District No. 2 of Grant County, Washington and the Priest Rapids Coordinating Committee requested that the U.S. Geological Survey, in collaboration with the Washington Department of Fish and Wildlife, assist them in evaluating the effects of native and introduced predatory fish on migrating juvenile salmon. From 2009 to 2010, we conducted sampling in the 103 kilometers (64 river miles) of the Columbia River from the tailrace of Rock Island Dam downstream to the tailrace of Priest Rapids Dam. To assess predation, we used electrofishing to collect northern pikeminnow, smallmouth bass, and walleye to analyze their diets during 2009 and 2010. In 2009, we used methods to allow comparisons to a previous study conducted in 1993. During 2009, we also used an alternate sampling strategy using habitat data and geographic information system software to select sites and allocate samples. In 2010, we used the data collected during 2009 to further refine our sampling design, with the intent of using the data collected during 2010 to formulate a design strategy for implementation during 2011. Based on the results of 2011, we would then propose a strategy for future studies. However, during 2011, our efforts were redirected to specifically address factors that may be affecting steelhead trout survival in the Priest Rapids Reservoir, Columbia River. We used the catch and diet data collected in 2009 and 2010 to estimate relative abundance, consumption, and predation indices for northern pikeminnow and smallmouth bass. Despite extensive sampling in the study area in 2009 and 2010, very few channel catfish and walleye were captured. The mean total lengths of northern pikeminnow were much lower than those observed in 1993; suggesting that efforts to remove northern pikeminnow in the study area may be shifting the population towards smaller fish. The northern pikeminnow predation index values were lower in 2009 than in the 1993 study. The reduced predation levels observed may be due to the prevalence of smaller pikeminnow in our catches than in catches reported in 1993. Predation by smallmouth bass was lower in 2009 than in 2010, and generally was greater than predation for northern pikeminnow. Predation for northern pikeminnow was concentrated in the tailrace areas of Priest Rapids, Wanapum, and Rock Island Dams; predation for smallmouth bass was concentrated in the forebay and mid-reservoir sections of the study area. Our results indicate areas where control measures for smallmouth bass could be concentrated to reduce predation in the Priest Rapids Project.

Washington↗

USGS2001

A spatially referenced regression model (SPARROW) for suspended sediment in streams of the Conterminous U.S.

Suspended sediment has long been recognized as an important contaminant affecting water resources. Besides its direct role in determining water clarity, bridge scour and reservoir storage, sediment serves as a vehicle for the transport of many binding contaminants, including nutrients, trace metals, semi-volatile organic compounds, a nd numerous pesticides (U.S. Environmental Protection Agency, 2000a). Recent efforts to addr ess water-quality concerns through the Total Maximum Daily Load (TMDL) process have iden tified sediment as the single most prevalent cause of impairment in the Nation’s streams a nd rivers (U.S. Environmental Protection Agency, 2000b). Moreover, sediment has been identified as a medium for the tran sport and sequestration of organic carbon, playing a potentia lly important role in understa nding sources and sinks in the global carbon budget (Stallard, 1998). A comprehensive understanding of sediment fate a nd transport is considered essential to the design and implementation of effective plans for sediment management (Osterkamp and others, 1998, U.S. General Accounting Office, 1990). An exte nsive literature addr essing the problem of quantifying sediment transport has produced a nu mber of methods for estimating its flux (see Cohn, 1995, and Robertson and Roerish, 1999, for us eful surveys). The accuracy of these methods is compromised by uncertainty in the concentration measurements and by the highly episodic nature of sediment movement, particul arly when the methods are applied to smaller basins. However, for annual or decadal flux es timates, the methods are generally reliable if calibrated with extended periods of data (Robertson and Roerish, 1999). A substantial literature also supports the Universal Soil Loss Equation (U SLE) (Soil Conservation Service, 1983), an engineering method for estimating sheet and rill erosion, although the empirical credentials of the USLE have recently been questioned (Tri mble and Crosson, 2000). Conversely, relatively little direct evidence is available concerning the fate of sediment. The common practice of quantifying sediment fate with a sediment deliv ery ratio, estimated from a simple empirical relation with upstream basin area, does not artic ulate the relative importance of individual storage sites within a basin (Wolman, 1977). Rates of sediment deposition in reservoirs and flood plains can be determined from empirical measurement s , but only a limited number of sites have been monitored, and net rates of deposition or loss from other potential sinks and sources is largely unknown (Stallard, 1998). In particular, little is known about how much sediment loss from fields ultimately makes its way to stream channels, and how much sediment is subsequently stored in or lost from th e streambed (Meade and Parker, 1985, Trimble and Crosson, 2000). This paper reports on recent progress made to a ddress empirically the question of sediment fate and transport on a national scale. The model pres ented here is based on the SPAtially Referenced Regression On Watershed attr ibutes (SPARROW) methodology, fi rst used to estimate the distribution of nutrients in str eams and rivers of the United Stat es, and subsequently shown to describe land and stream processes affecting the delivery of nutrients (Smith and others, 1997, Alexander and others, 2000, Preston and Brakeb ill, 1999). The model makes use of numerous spatial datasets, available at the national level, to explain long-term sediment water-quality conditions in major streams and rivers throughou t the United States. Sediment sources are identified using sediment erosion rates from the National Resources I nventory (NRI) (Natural Resources Conservation Service, 2000) and apportioned over the landscape according to 30- meter resolution land-use information from th e National Land Cover Data set (NLCD) (U.S. Geological Survey, 2000a). More than 76,000 reservoirs from the National Inventory of Dams (NID) (U.S. Army Corps of Engin eers, 1996) are identified as pot ential sediment sinks. Other, non-anthropogenic sources and sinks are identified using soil in formation from the State Soil Survey Geographic (STATSGO) data base (Schwarz and Alexander, 1995) and spatial coverages representing surficial rock t ype and vegetative cover. The SPA RROW model empirically relates these diverse spatial datasets to estimates of long-term, mean annual sediment flux computed from concentration and flow measurements co llected over the period 1985 -95 from more than 400 monitoring stations maintained by the Na tional Stream Quality Accounting Network (Alexander and others, 1998), the National Wa ter Quality Assessment Program, and U.S. Geological Survey District offices (Turcios and Gray, in press). Th e calibrated model is used to estimate sediment flux for over 60,000 stream segments included in the River Reach File 1 (RF1) stream network (Alexander and others, 1999). SPARROW uses statis tical methods to calibrate a simple, structural model of riverine water quality, one that imposes mass ba lance in accounting for changes in contaminant flux. As applied here, the mass-balance approach facilitates the interpretation of model results in terms of physical processes affecting sediment transport, and makes possible the estimation of various rates of sediment generation and loss associated with stream channels and features of the landscape. The statistical approach provides a basi s for assessing the error of these inferred rates and of the error in extrapolated estimates of sediment flux made for streams in the RF1 network. An important implication of the holistic modeling approach adopted in this analysis is that estimates of sediment production and loss ar e based on, and therefore consistent with, measurements of in-stream flux. Other ancillary information, such as direct measurements of long-term sediment storage and release from rese rvoirs (Steffen, 1996), is incorporated into the analysis by specifying additional equations expl aining these ancillary variables. The imposition of cross-equation constraints affords this info rmation a statistically consistent weight in explaining in-stream sediment flux. Thus, the me thodology described here represents a general framework for synthesizing a wide spectrum of available information relevant to the understanding of sediment fate and transport.

Conterminous United States↗

USGS2016

Paleozoic magmatism and porphyry Cu-mineralization in an evolving tectonic setting in the North Qilian Orogenic Belt, NW China

The NWW-striking North Qilian Orogenic Belt records the Paleozoic accretion–collision processes in NW China, and hosts Paleozoic Cu–Pb–Zn mineralization that was temporally and spatially related to the closure of the Paleo Qilian-Qinling Ocean. The Wangdian Cu deposit is located in the eastern part of the North Qilian Orogenic Belt, NW China. Copper mineralization is spatially associated with an altered early Paleozoic porphyritic granodiorite, which intruded tonalites and volcaniclastic rocks. Alteration zones surrounding the mineralization progress outward from a potassic to a feldspar-destructive phyllic assemblage. Mineralization consists mainly of quartz-sulfide stockworks and disseminated sulfides, with ore minerals chalcopyrite, pyrite, molybdenite, and minor galena and sphalerite. Gangue minerals include quartz, orthoclase, biotite, sericite, and K-feldspar. Zircon LA-ICPMS U–Pb dating of the ore-bearing porphyritic granodiorite yielded a mean 206 Pb/ 238 U age of 444.6 ± 7.8 Ma, with a group of inherited zircons yielding a mean U–Pb age of 485 ± 12 Ma, consistent with the emplacement age (485.3 ± 6.2 Ma) of the barren precursor tonalite. Rhenium and osmium analyses of molybdenite grains returned model ages of 442.9 ± 6.8 Ma and 443.3 ± 6.2 Ma, indicating mineralization was coeval with the emplacement of the host porphyritic granodiorite. Rhenium concentrations in molybdenite (208.9–213.2 ppm) suggest a mantle Re source. The tonalities are medium-K calc-alkaline. They are characterized by enrichment of light rare-earth elements (LREEs) and large-ion lithophile elements (LILEs), depletion of heavy rare-earth elements (HREEs) and high-field-strength elements (HFSEs), and minor negative Eu anomalies. They have ε Hf ( t ) values in the range of +3.6 to +11.1, with two-stage Hf model ages of 0.67–1.13 Ga, suggesting that the ca. 485 Ma barren tonalites were products of arc magmatism incorporating melts from the mantle wedge and the lithosphere. In contrast, the 40-m.y.-younger ore-bearing porphyritic granodiorite is sub-alkaline and peraluminous. They are enriched in LREEs and LILEs, depleted in HFSEs, and show weak negative Eu anomalies. They display ε Hf ( t ) values of captured or inherited zircons in the range of +8.5 to +10.0, and younger two-stage Hf model ages of 0.78 Ga and 0.86 Ga, similar to those of ca. 485 Ma tonalite. The ca. 445 Ma zircons have ε Hf ( t ) values of −2.1 to +9.9, with two-stage Hf model ages of 0.75–1.27 Ga. Moreover, they have relatively high oxygen fugacity than that of the precursor barren tonalite. The ca. 445 Ma magmas at Wangdian thus formed in a subduction setting, and incorporated melts from the subduction-modified lithosphere that had previously been enriched by additions of chalcophile and siderophile element-rich materials by the earlier magmatism and metasomatism during the Paleo Qilian-Qinling Ocean subduction event.

North Qilian Orogenic Belt↗