Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Agricultural, Biological and Environmental Statistics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,689 records · Page 78Linked to original sources
USGS2025

Groundwater salinity: Applying the specific conductance and water type proxy

Groundwater is increasingly needed for water supplies but may have limited utility in some locations because of its salinity. Salinity, often expressed as total dissolved solid (TDS), is frequently estimated using specific conductance (SC) measurements. However, the commonly used proxy (0.65 multiplied by SC to indicate TDS, common in many handheld meters) can result in inaccurate TDS estimates. First, the TDS–SC relationship is not linear over the entire concentration range of groundwater. Furthermore, the TDS (and salinity)–SC relationships vary substantially depending on the major-ion composition. Here we develop a proxy method utilizing SC and major-ion water type to estimate TDS and salinity specifically for groundwaters. Compared to most surface waters, groundwater tends to have a wider range of salinity (fresh to highly saline) and higher concentrations of bedrock-derived solutes such as carbonate ions, silica, and many other ions. The dataset used to develop the proxies includes water chemistry data from 149,059 discrete groundwater samples. The groundwater proxies, which employ nonlinear log–log relations, utilize five water types (HCO 3 , Cl, Ca-Mg-SO 4 , Na-K-SO 4 , and mixed waters), are accurate (median percent difference between TDS and salinity determined using the proxy compared to discrete measurements was <±0.8%) over a wide range of SC (up to 200 mS/cm), rapid, cost-effective, and can be measured on-site.

Groundwater↗
USGS2024

Preliminary observations of the April 5th, 2024, Mw4.8 New Jersey earthquake

On 5 April 2024, 10:23 a.m. local time, a moment magnitude 4.8 earthquake struck Tewksbury Township, New Jersey, about 65 km west of New York City. Millions of people from Virginia to Maine and beyond felt the ground shaking, resulting in the largest number (>180,000) of U.S. Geological Survey (USGS) “Did You Feel It?” reports of any earthquake. A team deployed by the Geotechnical Extreme Events Reconnaissance Association and the National Institute of Standards and Technology documented structural and nonstructural damage, including substantial damage to a historic masonry building in Lebanon, New Jersey. The USGS National Earthquake Information Center reported a focal depth of about 5 km, consistent with a lack of signal in Interferometric Synthetic Aperture Radar data. The focal mechanism solution is strike slip with a substantial thrust component. Neither mechanism’s nodal plane is parallel to the primary northeast trend of geologic discontinuities and mapped faults in the region, including the Ramapo fault. However, many of the relocated aftershocks, for which locations were augmented by temporary seismic deployments, form a cluster that parallels the general northeast trend of the faults. The aftershocks lie near the Tewksbury fault, north of the Ramapo fault.

New Jersey↗
USGS1976

Uranium analysis of single drops of natural waters using the fission-track technique

The fission-track technique has been applied to uranium analysis of natural waters using a single drop of water. Samples may be collected in the field by evaporating a drop of water on a detector, and samples may then be analyzed by returning the detector to the laboratory. A sample collecting kit has been assembled, which facilitates the designed sampling method. Some unique advantages of this technique are picogram sensitivity (10 -12 g) for uranium on single drops of water, maintenance of sample integrity during transport and storage, and the ability to discern whether the uranium is in solution or in the suspended material. Counting the tracks is the most time-consuming part of the analysis, but it can be reduced by using automatic counting systems. The analytical error is generally ± 10 percent over the entire range of concentrations.

Open-File Report↗
USGS2024

Effective site coefficients for the 2024 International Building Code (IBC)

The U.S. National Seismic Hazard Models (NSHMs), developed by the U.S. Geological Survey (USGS), have long been the scientific foundation of seismic design guidelines and have been used to compute design ground motions for construction of new buildings and retrofit of existing buildings in the United States and its territories. The 2018 NSHM is adopted by the 2024 International Building Code (IBC). Prior to the 2018 NSHM update, hazard calculations were required only at one reference site condition defined by V S30 =760 m/s (where V S30 is the time-averaged shear wave velocity from the surface to a depth of 30 m) and three periods (peak ground acceleration, PGA, and pseudo spectral accelerations at periods of 0.2 and 1 s, S s and S 1 ). Site coefficients, F PGA , F a , and F v , were then defined by the Building Seismic Safety Council (BSSC) Provisions Update Committee (PUC) in the site-specific procedures of National Earthquake Hazard Reduction Program (NEHRP) Recommended Seismic Provisions to calculate ground motions for other site classes with different V S30 values at the given periods. The design ground motions at other periods were then estimated using a generic spectral shape that was also defined by the BSSC PUC in NEHRP provisions. In recent years, the engineering community has realized there were deficiencies with the F a and F v site coefficients and the generic spectral shape. To avoid potentially dangerous underestimations of design ground motions for long period structures on soft site conditions in high seismicity regions, the BSSC PUC recommended the use of multi-period response spectra (MPRS) in 2017. As a result, the USGS produced multi-period and multi-V S30 response spectral values in the 2018 NSHM for calculations of design ground motions and the site coefficients F a and F v were eliminated from the 2020 NEHRP Provisions. As these site coefficients were widely used inside and outside of the United States, in this study we back-calculate the “effective” site coefficients F a,eff , and F v,eff by comparing MPRS for various site classes with the MPRS for the reference site condition, and discuss the changes that are observed in the 2024 IBC compared to its previous version in 2021. The effective site coefficients are presented for test site locations and their dependence on various factors including period, ground motion intensity, and regional models are discussed. Ratio maps between the new effective site coefficients and the old ones are then presented for soft site classes and for short and long periods. For soft site classes at short periods, the new effective site coefficients are lower than the old site coefficients for high seismicity regions and higher for low seismicity regions. As it was expected, for soft site classes at long periods and high seismicity regions, the new effective site coefficients are much larger than the old site coefficients without imposing the 50% increase as a penalty that was suggested in the 2021 IBC, whereas they could be much smaller if the 50% increase would have been imposed particularly around New Madrid and Charleston high seismicity regions. For low seismicity regions, the long period effective site coefficients can be smaller or larger by 20% compared to the 2021 IBC coefficients.

Conference Paper↗
USGS2024

Wildfire, extreme precipitation and debris flows, oh my! Channel response to compounding disturbances in a mountain stream in the Upper Colorado Basin, USA

Compounding changes in climate and human activities stand to increase sediment input to rivers in many landscapes, including via discrete perturbations such as post-fire debris flows. Because sediment supply is a dominant control on river morphology, understanding mountain river responses to sediment regime perturbations is critical to predicting and addressing downstream effects to infrastructure, water security and aquatic habitat. A growing body of literature explores the causes, likelihood, size and composition of post-fire debris flows, but the channel response to these disturbances remains poorly studied. This study used repeat field surveys, time-lapse photographs and pre- and post-disturbance remote sensing datasets to document and analyse space- and time-varying channel response to post-fire debris flows along a steep mountain stream in the Upper Colorado River Basin, USA. Specifically, we evaluated channel morphology and bed composition changes, correlations between channel changes and valley and channel attributes, and the relative importance of spring snowmelt versus summer monsoon events. Several cross-sectional channel change types were observed from lidar a month after post-fire debris-flow events, including channelized and braided incision into deposits, incision into the pre-fire channel bed, bank erosion and no change. Channel changes were most correlated with pre-fire channel width, valley width and unit stream power, and these relationships could be tested in other burned locations to evaluate their transferability. Repeat channel surveys before and after snowmelt indicate rapid recovery and channel narrowing following major sediment disturbances, although sediment deposits remained in the channel margins. Together, these results highlight the importance of field and remote sensing-based channel surveys to improve understanding of, and potential to predict, mountain channel response to compounding climate disturbances.

Earth Surface Processes and Landforms↗
USGS2025

40Ar/39Ar geochronology supporting mineral resources research at USGS Denver

The 40 Ar/ 39 Ar geochronology method is used to date potassium-bearing rocks and minerals, based on the decay of 40 K to 40 Ar, which provides important temporal constraints for geological events. The USGS Denver Argon Geochronology Laboratory dates samples from a variety of projects, mainly in the USGS Mineral Resource Program and the National Cooperative Geologic Mapping Program, facilitating in-depth research into the timing of geological events and processes. Recent applications of this method include geochronological studies in the Yellow Pine district, revealing mineralization ages that range from 51 to 70 Ma, and investigations into the Bear Lodge alkaline complex, providing insights into the timing of REE carbonatite formation. Additionally, studies at Alunite Ridge highlight the method's potential for understanding concealed mineral deposits. Ongoing projects continue to leverage 40 Ar/ 39 Ar data to enhance understanding of geologic frameworks and mineral resources, underpinning its importance in modern geochronology and mineral resource assessment.

Conference Paper↗
USGS2025

Analysis of the potential effects of Uzbekistan’s mineral endowment on the critical mineral supply of tungsten

Tungsten appears on the 2018 and 2022 U.S. Geological Survey critical mineral lists in part because of a very high global production concentration in China, which produces almost 83 percent of the world’s mined tungsten. Using known parameters and values from other tungsten mining operations, we created hypothetical scenarios in which three tungsten deposits in Uzbekistan are considered for development. Our results show that all three deposits are likely to be economically viable to develop under 2024 market conditions. If the three studied tungsten deposits were put into production, Uzbekistan could become the third-leading tungsten-producing country in the world and increase world output of tungsten by 2.7 percent. Putting these tungsten deposits in Uzbekistan into production could slightly reduce the tungsten global market concentration, therefore reducing the supply disruption potential for tungsten.

Open-File Report↗
USGS2025

Road salt collection and redistribution at an urban rain garden on sandy soil, Gary, Indiana

Rain gardens installed as green infrastructure to divert storm runoff from entering combined sewers also collect dissolved constituents and particulates. An urban rain garden in northwestern Indiana, USA, was continuously monitored from November 2019 to May 2021 to evaluate the fate of dissolved constituents entering the rain garden in runoff. Physical and chemical properties of soils in the rain garden were also monitored, along with underlying groundwater. Linear regression models relating specific conductance to chloride concentration indicated that the 0.0371-ha (3998 square feet) rain garden collected approximately 1490 kg (3285 pounds) of road salt from the surrounding 0.2228 ha (24,500 square feet) of impervious surfaces. Soils and groundwater were seasonally affected by road salt application but carryover from year to year was not indicated. Rain garden soil permeability (5.20 × 10 −5 to 9.72 × 10 −5 m/s) remained unchanged during the study period and soil organic carbon generally increased under native vegetation. The results suggest that a rain garden built on sandy soil can divert substantial quantities of runoff and dissolved constituents from combined sewers; however, chloride is transported to sub-infrastructure groundwater that eventually discharges to adjacent waterways with concentrations lower than those observed in runoff.

Indiana↗
USGS2026

Rewilding the upper Klamath River Basin: Rapid recolonization of Chinook salmon following the world’s largest dam removal

Habitat fragmentation is a global driver of decline in biodiversity, yet evaluations of ecological response following re-connection remain rare. In 2024, four hydroelectric dams on the Klamath River were removed, reconnecting over 640 km of anadromous habitat and marking the largest dam removal project completed to date. We used a stationary high-resolution multi-beam imaging SONAR to quantify adult Chinook salmon ( Oncorhynchus tshawytscha ) passage into newly reopened reaches during the first two migratory seasons following dam removal. An estimated 7,742 (95% CI: 7,702–7,778) Chinook salmon migrated upstream in 2024 and 13,310 (95% CI: 12,876–13,733) in 2025, representing 18–19% of fish returning to the Klamath River Basin. Within this period, Chinook salmon recolonized 88% of their documented historical distribution, expanding into 345 km of reconnected habitats and reaching elevations of up to 1,250 m. Recolonization required fish to swim through dam removal sites, complex hydraulic corridors and engineered fishways, demonstrating the propensity for rapid recolonization at basin scale despite these challenges. These findings provide the first quantitative assessment of salmon response to the world’s largest dam removal and demonstrate how reconnection can catalyze large-scale recolonization in historically fragmented river networks.

California, Oregon↗
USGS2025

What 25+ years of "Did You Feel It" intensities tell us about shaking in California

“When will the Big One happen?” is a question that people often have for earthquake scientists. But while waiting for the “Big One” to occur, people will usually experience frightening or damaging shaking from multiple relatively smaller‐magnitude earthquakes. Given this context, it raises the question: “Where does most of the damage come from?” Could smaller, yet more frequent, earthquakes account for the majority of reported impactful shaking? To explore this question, we consider reports of earthquake damage and felt shaking experiences from a catalog of community‐collected intensity values from the U.S. Geological Survey’s “Did You Feel It?” system. Comparing these intensities to expectations from a ground‐motion model, we find that earthquakes of magnitudes smaller than expected are responsible for most reported intensities of community decimal intensities (CDI) 4.5 and above (moderate and higher shaking intensity levels). (Here “expected value” is meant in its mathematical sense of the mean or equivalently median shaking intensity.) We also present a regional analysis of observed earthquake shaking for specific areas, detailing the maximum intensity experienced within a predetermined area. We identify several instances of M < 4.5 events that generated maximum intensities of CDI > 5 in regions in California surrounding the cities of Eureka, San Francisco, Los Angeles, and San Diego. Our results motivate the need to include smaller‐magnitude earthquakes in communications about earthquake hazard and risk reduction.

California↗
USGS2025

Flow heterogeneity controls dissolution dynamics in topologically complex rocks

Rock dissolution is a common subsurface geochemical reaction affecting pore space properties, crucial for reservoir stimulation, carbon storage, and geothermal energy. Predictive models for dissolution remain limited due to incomplete understanding of the mechanisms involved. We examine the influence of flow, transport, and reaction regimes on mineral dissolution using 29 time-resolved data from 3D rocks. We find that initial pore structure significantly influences the dissolution pattern, with reaction rates up to two orders of magnitude lower than batch conditions, given solute and fluid-solid boundary constraints. Flow unevenness determines the location and rate of dissolution. We propose two models describing expected dissolution patterns and effective reaction rates based on dimensionless metrics for flow, transport, and reaction. Finally, we analyze feedback between evolving flow and pore structure to understand conditions that regulate/reinforce dissolution hotspots. Our findings underscore the major impact of flow arrangement on reaction-front propagation and provide a foundation for controlling dissolution hotspots.

Geophysical Research Letters↗
USGS2025

Long-term trends in microseismicity during operational shut-ins at the Coso Geothermal Field, California

Pausing injection and production can lead to induced seismicity in a variety of settings, with some of the largest events occurring during these so-called shut-ins. In geothermal fields, shut-ins are periodically conducted for maintenance on wells and surface infrastructure, thereby offering recurring means of estimating stress changes in the subsurface that lead to increased seismicity rates. Here, we examine daily production and microseismicity data from the Coso Geothermal Field (CGF) in California between 1996 and 2010 to investigate the repetitive trends of operational shut-in microseismicity. Using 24 local seismic stations, we first analyze spatial and temporal trends of over 60,000 earthquakes with magnitudes between -0.4 to 3.8. We find that the northern region exhibits no significant seismicity changes during shut-ins, whereas the rest of the field experiences induced seismicity during almost every shut-in with an increasing intensity towards the southern and eastern portions of the field, highlighting local differences in stress within the CGF. Additionally, we cluster the seismicity using waveform cross-correlation, revealing several earthquake clusters primarily occurring during shut-in periods. These observations suggest that certain fracture and fault sections respond quicker to changes in pore pressure and poroelastic stresses within the geothermal system, possibly highlighting main fluid pathways.

California↗
USGS2024

Development of a hydrogeologic visualization model for western Sarpy County, Nebraska

Population in western Sarpy County, Nebraska, has steadily increased over the last several decades and has led to increased groundwater use for domestic purposes. To meet the increase in demand, the Papio-Missouri River Natural Resources District is seeking to use all available sources of groundwater in western Sarpy County. Additionally, elevated groundwater nitrate plus nitrite as nitrogen concentrations were detected, indicating the need to better understand the groundwater quality of the area. Although the general geology of the area is understood, the area does not have detailed information on the extent of the various aquifers, particularly the Dakota aquifer. To characterize these aquifers, the Papio-Missouri River Natural Resources District invested in airborne electromagnetic surveys of the area to better understand the subsurface geology. Although these surveys improved understanding of the groundwater systems in the area, the Papio-Missouri River Natural Resources District wanted to integrate the subsurface information with available water-quality and groundwater-level data. In response, the U.S. Geological Survey, in cooperation with the Papio-Missouri River Natural Resources District, the Nebraska Natural Resources Commission, and the Nebraska Department of Natural Resources, assembled geologic, hydrogeologic and nitrate plus nitrite as nitrogen information for the selected area into a three-dimensional visualization computer software package called GeoScene3D. The completed GeoScene3D project was assembled to provide a visualization of the groundwater systems and associated water-quality results in Sarpy County and to provide the Papio-Missouri River Natural Resources District managers with information that can be used to make more informed groundwater resource-planning decisions in the future. This report details the development of a three-dimensional model created within GeoScene3D to visualize the subsurface, particularly the Dakota Sandstone in western Sarpy County.

Nebraska↗
USGS2025

Long-term dynamics of earthquake swarms in the Yellowstone caldera

The factors controlling the spatial distribution and temporal evolution of earthquake swarms in volcanic systems remain unclear. We leverage leading-edge deep learning algorithms and a detailed three-dimensional velocity model to construct a 15-year high-resolution earthquake catalog of the Yellowstone caldera region. More than half of the region’s earthquakes are clustered into swarm-like families characterized by episodes of hypocenter expansion and migration. Adjacent earthquake swarms, separated by long quiescent periods, are found to be a dominant feature. We suggest that these swarms are controlled by the interplay between slowly diffusing aqueous fluids and rapid episodic fluid injections, which may result from the breaking of permeability seals. Our analyses also indicate that clustered seismicity beneath the caldera occurs on relatively immature, rougher fault structures, compared to more planar faults outside. Our results provide additional context for understanding seismicity in hydrothermal systems, highlighting the key role played by long-term fluid diffusion processes in driving the occurrence of earthquake swarms.

Idaho, Montana, Wyoming↗
USGS2025

Seamless Geologic Map Database for the Intermountain West, United States: A foundational dataset for mineral systems analysis

The Intermountain West has a complex geologic history, resulting in the formation of a diverse array of mineral deposits. Effective mineral exploration requires understanding the spatial and temporal relationships among geologic processes and events, a key focus of the mineral systems approach to exploration. This paper presents the Intermountain West Seamless Geologic Map Database, a unified dataset designed to support mineral exploration. Integrating geologic provinces, structural settings, and hydrothermal alteration, the database leverages the Seamless Integrated Geologic Mapping (SIGMa) extension to the USGS Geologic Map Schema (GeMS) to standardize geologic data from varied sources. SIGMa's hierarchical stratigraphic organization and feature-level metadata enhance data interoperability and reusability, enabling seamless query, analysis, and visualization of lithology, structural features, mineral deposits, geochronology, hydrothermal alteration. volcanic activity, and By providing a regionally consistent and dynamically evolving geologic map, this database provides a foundational framework for mineral exploration and geologic research. It also allows for an efficient workflow that expedites the publication of integrated geologic map databases.

Conference Paper↗
USGS2026

Methodology for quantitative spatial sensitivity analysis of volcanic geodetic networks

Introduction This report introduces a methodology for assessing the state of the U.S. Geological Survey Volcano Observatories’ geodetic monitoring networks that measure how volcanoes deform or change shape. This new method uses a model-based approach that considers the uniqueness of the instrument environments at each volcano. This report focuses on simplified volcanic sources, is independent of the shape or size of the volcano, or the network geometry, and thus highlights the strengths and potential vulnerabilities of each volcano’s geodetic network in an actionable visual format. This analysis can help observatories to make informed decisions about whether volcanoes have an adequate level of geodetic monitoring and indicate where improvements are needed.

Lassen Peak, Mount Shasta↗
USGS2024

Evidence for low effective stress within the crust of the subducted Gorda plate from the 2022 December Mw 6.4 Ferndale earthquake sequence

Stress levels on and adjacent to megathrust faults at seismogenic depths remain a key but difficult to constrain parameter for assessing seismic hazard in subduction zones. Although strong ground motions have been observed to be generated from distinct, high-stress regions on the downdip end of the megathrust rupture areas in many great earthquakes, we lack direct constraints on the stress level in the lower seismogenic portion of the Cascadia megathrust. On 2022 December 20, a M w 6.4 strike-slip earthquake occurred near Ferndale, California in southern Cascadia and likely ruptured the Gorda slab crust in the lower seismogenic portion, providing an opportunity to assess the stress level in this region. Here, we relocate the Ferndale mainshock and the first two weeks of aftershocks using a high-resolution 3-D velocity model and estimate rupture dimensions, directivity, and stress drop for several M w 4-5 aftershocks and recent earthquakes. The aftershocks define a strike-slip fault in the slab crust striking ENE, consistent with the mainshock focal mechanism. The orientation of this fault is about 45 ° off the ideally oriented fault plane given the stress state in the slab. The aftershock zone is extensive and broad in the forward direction of the mainshock rupture but still constrained within the volume of high Vp/Vs within the slab crust. Our stress drop estimates are generally lower for M w 4-5 earthquakes located within the slab crust compared to those a few km deeper in the slab mantle. Combined, our results support a relatively low effective stress level in the vicinity of the megathrust in the lower portion of the seismogenic zone in southern Cascadia, likely due to elevated fluid pressures. Consequently, the ground motion in the onshore region above this low-stress seismogenic portion in southern Cascadia may not be as intense as that observed during great earthquakes in other subduction zones.

California↗
USGS2025

Wangyanite, PdNi8S8, a new Pd end-member mineral of the pentlandite group from the J-M reef, Stillwater Complex, Montana, USA

Wangyanite (IMA2024-008a), ideally PdNi 8 S 8 , is a Pd end-member mineral of the pentlandite group that was discovered in the J-M reef of the Stillwater Complex, Montana, USA. Wangyanite occurs as anhedral-subhedral granular crystals 200–400 µm in size, associated with isoferroplatinum, braggite, pentlandite, and chalcopyrite interstitial to plagioclase grains within anorthosite. Wangyanite exhibits a yellowish brown color with a black streak and a metallic luster. It is brittle with uneven fractures, and has a calculated density of 5.14 g/cm 3 . The mineral does not show discernible pleochroism, bireflectance, or anisotropy. It has an average composition of 9.95 wt.% Pd, 31.95 wt.% Ni, 25.02 wt.% Fe, 0.57 wt.% Co, 31.74 wt.% S, totaling 99.23 wt.%. The empirical formula, based on eight sulfur atoms per formula unit, is (Pd 0.76 Co 0.08 ) Σ0.84 (Ni 4.39 Fe 3.60 ) Σ7.99 S 8 . Wangyanite has a cubic cell with a space group of Fm -3 m (#225), having lattice parameters of a = 10.1167(12) Å, V = 1035.4(4) Å 3 , and Z = 4. Its crystal structure has been solved by single-crystal three-dimensional electron diffraction study. The strongest X-ray diffraction lines of wangyanite are claculated at [ d in Å ( I %)( hkl )]: 5.841(14.03)(111), 3.050(100)(311), 1.947(29.16)(115,333), 1.264(11.66)(800), 3.577(8.79)(220), 2.920(20.82)(222), and 2.321(9.34)(331). Wangyanite shares the same crystal structure as pentlandite, but the octahedrally coordinated site is mainly occupied by Pd in wangyanite. Based on the textural features and previous experimental Pd-Fe-Ni-S phase system, wangyanite could form by peritectic reaction between braggite, pentlandite and sulfide liquid. These mineral associations are stable in a Ni-Pd-rich sulfide melt system at about 550 °C or even lower temperature. Therefore, wangyanite can potentially serve as an indicator of the presence of Pd-rich residual melts. The mineral is named in honor of Prof. Christina Yan Wang, a well-known researcher on platinum-group element (PGE) occurrences and enrichment mechanisms in mafic-ultramafic intrusions, notably those deposits related to the Emeishan large igneous province in China.

Montana↗