Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geological Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78Linked to original sources
USGS2019

Estimating the pressure-limited dynamic capacity and costs of basin-scale CO2 storage in a Saline Formation

Deployment of carbon capture and storage (CCS) could be necessary to be able to satisfy baseload electricity demand, maintain diversity in the energy mix, and achieve mitigation of carbon dioxide (CO 2 ) emissions at lowest cost ( IPCC, 2015 ; U.S. DOE, 2016 ). If basin-, regional- or national-scale deployment of CCS is needed, it may be possible to store only a small fraction of the captured CO 2 in oil and natural gas reservoirs. The vast majority would likely have to be stored in saline formations. Pressure buildup as a result of injecting CO 2 into such reservoirs is expected to be an important source of risk associated with CO 2 storage, and could constrain dynamic storage capacities (maximum injection rates) to be far below estimates based on access to theoretical storage resources. Estimates of CO 2 storage costs based on an assumption of practical availability of the theoretical storage resource could lead to underestimation of the costs of CO 2 storage. In this study, simulation results suggest that the pressure-limited dynamic CO 2 storage capacity of the Mount Simon Sandstone could be less than 4% of the theoretical storage resource in this saline formation, and storage costs could be an order of magnitude higher than recent estimates. However, consideration of the geologic heterogeneity in this deep saline formation allowed definition of a high injectivity zone, and estimated costs of CO 2 storage in this “sweet spot” of the reservoir approached recent estimates that did not include costs for pressure management.

Illinois, Indiana, Kentucky↗
USGS2012

Compaction of basin sediments: Modeling based on time-temperature history

Porosity decrease of sandstones, carbonates, and shales during burial is modeled here in terms of time-temperature exposure rather than in terms of depth. Loss of porosity (ϕ) in the subsurface is represented by a power function, ϕ = A ( M ) B , where A and B are constants and M is a measure of integrated time-temperature history. Regression lines of carbonate and sandstone porosity upon Lopatin's time-temperature index of thermal maturity (TTI) generally fall within a rather narrow envelope whose axis is approximated by ϕ = 30(TTI) −0.33 . This equation is useful for regional modeling of carbonate and sandstone compaction. Dependence of porosity upon integrated time-temperature history implies that basin sediments are not in equilibrium but compact through geologic time. Calculations show that subsidence resulting from the loss of porosity with increasing time-temperature exposure (as opposed to deeper burial) can produce a second-stage, passively formed basin containing many hundreds of meters of sediments.

Journal of Geophysical Research Solid Earth↗
USGS1997

On the origin of diverse aftershock mechanisms following the 1989 Loma Prieta earthquake

We test the hypothesis that the origin at the diverse suite of aftershock mechanisms Following the 1989 M 7.1 Loma Prieta, California, earthquake is related to the post-main-shock static stress field We use a 3-D boundary-element algorithm to calculate static stresses combined with a Coulomb failure criterion to calculate conjugate failure planes at aftershock locations. The post-main-shock static stress field is taken as the of a sum of a pre-existing stress field and changes in stress due to the heterogeneous slip across the Loma Prieta rupture plane. The background stress field is assumed to be either a simple shear parallel to the regional trend of the San Andreas fault or approximately fault-normal compression A suite of synthetic aftershock mechanisms from the conjugate failure planes is generated and quantitatively compared (allowing for uncertainties in both mechanism parameters and earthquake locations) to well-constrained mechanisms reported in the US Geological Survey Northern California Seismic Network catalogue. We also compare calculated rakes with those observed by resolving the calculated stress tensor onto observed focal mechanism nodal planes, assuming either plane to be a likely rupture plane.

Geophysical Journal International↗
USGS1998

Mapping the Gulf of Maine with side-scan sonar: A new bottom-type classification for complex seafloors

The bedrock-framed seafloor in the northwestern Gulf of Maine is characterized by extreme changes in bathymetric relief and covered with a wide variety of surficial materials. Traditional methods of mapping cannot accurately represent the great heterogeneity of such a glaciated region. A new mapping scheme for complex seafloors, based primarily on the interpretation of side-scan sonar imagery, utilizes four easily recognized units: rock, gravel, sand and mud. In many places, however, the seafloor exhibits a complicated mixture or extremely 'patchy' distribution of the four basic units, which are too small to map individually. Twelve composite units, each a two-component mixture of the basic units, were established to represent this patchiness at a small scale (1:100,000). Using a geographic information system, these and all other available data (seismic profiles, grab samples, submersible dives and cores) were referenced to a common geographic base, superimposed on bathymetric contours and then integrated into surficial geologic maps of the regional inner continental shelf. This digital representation of the seafloor comprises a multidimensional, interactive model complete with explicit attributes (depth, bottom type) that allow for detailed analysis of marine environments.

Journal of Coastal Research↗
USGS1981

Geological considerations in hazardous waste disposal

Present regulations assume that long-term isolation of hazardous wastes - including toxic chemical, biological, radioactive, flammable and explosive wastes - may be effected by disposal in landfills that have liners of very low hydraulic conductivity. In reality, total isolation of wastes in humid areas is not possible; some migration of leachate from wastes buried in the gound will always occur. Regulations should provide performance standards applicable on a site-by-site basis rather than rigid criteria for site selection and design. The performance standards should take into account several factors: (1) the categories, segregation, degradation and toxicity of the wastes; (2) the site hydrogeology, which governs the direction and rate of contaminant transport; (3) the attenuation of contaminants by geochemical interactions with geologic materials; and (4) the release rate of unattenuated pollutants to surface or groundwater. An adequate monitoring system is essential. The system should both test the extent to which the operation of the site meets performance standards and provide sufficient warning of pollution problems to allow implementation of remedial measures. In recent years there has been a trend away from numerous, small disposal sites toward fewer and larger sites. The size of a disposal site should be based on the attenuation capacity of the geologic material, which has a finite, though generally not well-defined, limit. For slowly degradable wastes, engineered sites with leachate-collection systems appear to be only a temporary solution since the leachate collected will also require final disposal.

Journal of Hydrology↗
USGS1992

Decomposition techniques

Sample decomposition is a fundamental and integral step in the procedure of geochemical analysis. It is often the limiting factor to sample throughput, especially with the recent application of the fast and modern multi-element measurement instrumentation. The complexity of geological materials makes it necessary to choose the sample decomposition technique that is compatible with the specific objective of the analysis. When selecting a decomposition technique, consideration should be given to the chemical and mineralogical characteristics of the sample, elements to be determined, precision and accuracy requirements, sample throughput, technical capability of personnel, and time constraints. This paper addresses these concerns and discusses the attributes and limitations of many techniques of sample decomposition along with examples of their application to geochemical analysis. The chemical properties of reagents as to their function as decomposition agents are also reviewed. The section on acid dissolution techniques addresses the various inorganic acids that are used individually or in combination in both open and closed systems. Fluxes used in sample fusion are discussed. The promising microwave-oven technology and the emerging field of automation are also examined. A section on applications highlights the use of decomposition techniques for the determination of Au, platinum group elements (PGEs), Hg, U, hydride-forming elements, rare earth elements (REEs), and multi-elements in geological materials. Partial dissolution techniques used for geochemical exploration which have been treated in detail elsewhere are not discussed here; nor are fire-assaying for noble metals and decomposition techniques for X-ray fluorescence or nuclear methods be discussed.

Journal of Geochemical Exploration↗
USGS2006

Geologic, hydrologic, and geochemical interpretations of mineral deposits as analogs for understanding transport of environmental contaminants

Base- and precious-metal mineral deposits comprise anomalous concentrations of metals and associated elements, which may be useful subjects for study as analogs for migration of environmental contaminants. In the geologic past, hydrothermal mineral deposits formed at the intersection of favorable geologic, hydrologic and geochemical gradients. In the present, weathering of these sulfide-rich deposits occurs as a result of the interplay between rates of oxygen supply versus rates of ground or surface-water flow. Transport and spatial dispersion of elements from a mineral deposit occurs as a function of competing rates of water flow versus rates of attenuation mechanisms such as adsorption, dilution, or (co)precipitation. In this paper we present several case studies from mineralized and altered sedimentary and crystalline aquifers in the western United States to illustrate the geologic control of ground-water flow and solute transport, and to demonstrate how this combined approach leads to a more complete understanding of the systems under study as well as facilitating some capability to predict major flow directions in aquifers.

Journal of Geochemical Exploration↗
USGS1998

Radar attenuation tomography using the centroid frequency downshift method

A method for tomographically estimating electromagnetic (EM) wave attenuation based on analysis of centroid frequency downshift (CFDS) of impulse radar signals is described and applied to cross-hole radar data. The method is based on a constant- Q model, which assumes a linear frequency dependence of attenuation for EM wave propagation above the transition frequency. The method uses the CFDS to construct the projection function. In comparison with other methods for estimating attenuation, the CFDS method is relatively insensitive to the effects of geometric spreading, instrument response, and antenna coupling and radiation pattern, but requires the data to be broadband so that the frequency shift and variance can be easily measured. The method is well-suited for difference tomography experiments using electrically conductive tracers. The CFDS method was tested using cross-hole radar data collected at the U.S. Geological Survey Fractured Rock Research Site at Mirror Lake, New Hampshire (NH) during a saline-tracer injection experiment. The attenuation-difference tomogram created with the CFDS method outlines the spatial distribution of saline tracer within the tomography plane.

Journal of Applied Geophysics↗
USGS1999

Assessment of Mars Pathfinder landing site predictions

Remote sensing data at scales of kilometers and an Earth analog were used to accurately predict the characteristics of the Mars Pathfinder landing site at a scale of meters. The surface surrounding the Mars Pathfinder lander in Ares Vallis appears consistent with orbital interpretations, namely, that it would be a rocky plain composed of materials deposited by catastrophic floods. The surface and observed maximum clast size appears similar to predictions based on an analogous surface of the Ephrata Fan in the Channeled Scabland of Washington state. The elevation of the site measured by relatively small footprint delay-Doppler radar is within 100 m of that determined by two-way ranging and Doppler tracking of the spacecraft. The nearly equal elevations of the Mars Pathfinder and Viking Lander 1 sites allowed a prediction of the atmospheric conditions with altitude (pressure, temperature, and winds) that were well within the entry, descent, and landing design margins. High-resolution (~38 m/pixel) Viking Orbiter 1 images showed a sparsely cratered surface with small knobs with relatively low slopes, consistent with observations of these features from the lander. Measured rock abundance is within 10% of that expected from Viking orbiter thermal observations and models. The fractional area covered by large, potentially hazardous rocks observed is similar to that estimated from model rock distributions based on data from the Viking landing sites, Earth analog sites, and total rock abundance. The bulk and fine-component thermal inertias measured from orbit are similar to those calculated from the observed rock size-frequency distribution. A simple radar echo model based on the reflectivity of the soil (estimated from its bulk density), and the measured fraction of area covered by rocks was used to approximate the quasi-specular and diffuse components of the Earth-based radar echos. Color and albedo orbiter data were used to predict the relatively dust free or unweathered surface around the Pathfinder lander compared to the Viking landing sites. Comparisons with the experiences of selecting the Viking landing sites demonstrate the enormous benefit the Viking data and its analyses and models had on the successful predictions of the Pathfinder site. The Pathfinder experience demonstrates that, in certain locations, geologic processes observed in orbiter data can be used to infer surface characteristics where those processes dominate over other processes affecting the Martian surface layer. Copyright 1999 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗
USGS2017

Satellite-tagged osprey nearly sets longevity record and productivity response to initial captures

We equipped adult Ospreys ( Pandion haliaetus ) from 24 nests in Oregon/Washington with satellite-tracked battery-powered radios, known as platform transmitter terminals (PTTs), in 1996–1999. These Ospreys from the lower Columbia River (river miles 76–286), and the Willamette Valley in western Oregon were part of a larger study of Osprey fall migration, wintering ecology, and spring migration, which included additional adults from the Upper Midwest and East Coast of the United States ( Martell et al. 2001 , 2014 , Washburn et al. 2014 ). These early-generation PTTs weighed 30–35 g (Microwave Telemetry Inc., Columbia, MD U.S.A.) and utilized the ARGOS tracking system ( www.argos-system.org ). We placed PTTs on the birds' backs using Teflon ribbon (Bally Ribbon, Bally, PA U.S.A.) in a standard backpack configuration ( Kenward 2001 ). With the mass of adult male Ospreys 1400 to 1500 g ( Poole et al. 2002 ), the ratio of tag mass to body mass was 2.0 to 2.5%. Ospreys also received a standard size 8 bird band (U.S. Geological Survey) on one leg and a numbered color band on the other. For more details on trapping techniques, attachment procedures, the battery-powered units, turn-on, turn-off cycles, and tracking equipment, see Martell et al. (2001) .

Oregon, Washington↗
USGS2011

Geographical and geological data from caves and mines infected with white-nose syndrome (WNS) before September 2009 in the eastern United States

Since 2006, a white fungus named Geomyces destructans has been observed on the muzzles, noses, ears, and (or) wings of bats in the eastern United States, and bat colonies that are infected with this fungus have experienced dramatic incidences of mortality. Although it is not exactly certain how and why these bats are dying, this condition has been named white-nose syndrome (WNS). WNS appears to have spread from an initial infection site at a cave that is connected to a commercial cave in New York, and by the end of August 2009 was identified in at least 74 other sites in the eastern United States. Although detailed geographical and geological data are limited, a review of the available data shows that sites infected with WNS before September 2009 include both natural caves and mines. These infected sites extend from New Hampshire to Virginia, and known site elevations range from 84 to 2693 feet above sea level. In terms of geological setting, the infected sites include sedimentary, metamorphic, and igneous rocks of ages ranging from Precambrian to Jurassic. However, by the end of August 2009, no infected sites had been identified in strata of Mississippian, Cretaceous, or Triassic age. Meteorological data are sparse, but most of the recorded air temperatures in the known WNS-infected caves and mines range from 0 to 13.9 degrees C, and humidity measurements range from 68 to 100 percent. Although it is not certain which environmental parameters are important for WNS, it is hoped that the geographical and geological information presented in this paper will inform and clarify some of the debate about WNS, lead to greater understanding of the environmental parameters associated with WNS, and highlight the paucity of scientific data from caves in the eastern United States.

Journal of Cave and Karst Studies↗
USGS2010

A review of sediment budget imbalances along Fire Island, New York: Can nearshore geologic framework and patterns of shoreline change explain the deficit?

Sediment budget analyses conducted for annual to decadal timescales report variable magnitudes of littoral transport along the south shore of Long Island, New York. It is well documented that the primary transport component is directed alongshore from east to west, but relatively little information has been reported concerning the directions or magnitudes of cross-shore components. Our review of budget calculations for the Fire Island coastal compartment (between Moriches and Fire Island Inlets) indicates an average deficit of 217,700 m3/y. Updrift shoreline erosion, redistribution of nourishment fills, and reworking of inner-shelf deposits have been proposed as the potential sources of additional sediment needed to rectify budget residuals. Each of these sources is probably relevant over various spatial and temporal scales, but previous studies of sediment texture and provenance, inner-shelf geologic mapping, and beach profile comparison indicate that reworking of inner-shelf deposits is the source most likely to resolve budget discrepancies over the broadest scales. This suggests that an onshore component of sediment transport is likely more important along Fire Island than previously thought. Our discussion focuses on relations between geomorphology, inner-shelf geologic framework, and historic shoreline change along Fire Island and the potential pathways by which reworked, inner-shelf sediments are likely transported toward the shoreline.

Journal of Coastal Research↗
USGS2012

An interpretation of episodic slip on the Calaveras fault near Hollister, California

Data from a precision multi-wavelength distance measuring (MWDM) instrument, located near Hollister, California, have been analyzed in terms of strike-slip faulting in the region covered by the network. Four episodes of deformation that are readily identifiable in the MWDM data for the year following September 1975 can be modeled as slip on the Calaveras fault. Creepmeter data tend to support this interpretation, since the creep events and the observed episodes of deformation appear to be correlated in a temporal sense. Lower bounds on the moment for each episode of slip can be determined from the MWDM data by the technique of linear programing. The results indicate that aseismic slip is the dominant mechanism for strain release, since the combined moment of 1.16 × 10 24 dyn cm for the four episodes far exceeds the moment of all of the earthquakes that occurred during the year. Creepmeter data and geologic evidence that are taken in conjunction with the lower bound of the moment indicate that the depth of aseismic slip for some of the episodes of fault slip could extend to below the greatest depth of earthquake hypocenters for this region of central California.

Journal of Geophysical Research Solid Earth↗
USGS2012

Changes in faunal and vegetation communities along a soil calcium gradient in northern hardwood forests

Depletion of Ca from forest soils due to acidic deposition has had potentially pervasive effects on forest communities, but these impacts remain largely unknown. Because snails, salamanders, and plants play essential roles in the Ca cycle of northern hardwood forests, we hypothesized that their community diversity, abundance, and structure would vary with differences in biotic Ca availability. To test this hypothesis, we sampled 12 upland hardwood forests representing a soil Ca gradient in the Adirondack Mountains, New York (USA), where chronic deposition has resulted in acidified soils but where areas of well-buffered soils remain Ca rich due to parent materials. Along the gradient of increasing soil [Ca 2+ ], we observed increasing trends in snail community richness and abundance, live biomass of redback salamanders (Plethodon cinereus (Green, 1818)), and canopy tree basal area. Salamander communities were dominated by mountain dusky salamanders (Desmognathus ochrophaeus Cope, 1859) at Ca-poor sites and changed continuously along the Ca gradient to become dominated by redback salamanders at the Ca-rich sites. Several known calciphilic species of snails and plants were found only at the highest-Ca sites. Our results indicated that Ca availability, which is shaped by geology and acidic deposition inputs, influences northern hardwood forest ecosystems at multiple trophic levels, although the underlying mechanisms require further study.

New York↗
USGS2025

The 2014–2015 Holuhraun lava flow-field in Iceland as a planetary analog for young volcanic terrains in Elysium Planitia, Mars

Elysium Planitia is the youngest volcanic terrain on Mars, and the only region that exhibits evidence of ongoing magmatic activity today. This makes Elysium Planitia crucial for understanding the tectonic, magmatic, volcanic, and thermal state of the planet. The 2014–2015 Holuhraun eruption in the Icelandic Highland provides a unique opportunity to study a large-volume, fissure-fed eruption—with associated lava–water interactions—that serves as a terrestrial analog for volcanic terrains in Elysium Planitia. Here, we detail the key similarities between the Holuhraun and Elysium Planitia sites, including their geological settings, prominent lava morphologies, and implications for inferring eruption dynamics. Even in the absence of global plate tectonics on Mars, both locations exhibit young fissure systems, indicating an extensional tectonic setting. Detailed investigations of lava morphologies offer valuable insights into the dynamics and evolution of fissure-fed eruptions. Of particular importance are “transitional” lavas, which, at the Holuhraun site, are associated with different effusion rates and eruption stages. The presence of inflation features with disrupted surfaces in Elysium Planitia supports the interpretation that these are rubbly lava flows formed in association with high local strain rates, implying an initial high effusion rate. However, both locations exhibit polygonal terrain, which is indicative of low strain rate conditions, implying a change to cooling under broadly stagnant conditions. Due to its variety of recent geologic processes, including volcanic and potentially aqueous flows, the presence of pristine surfaces, as well as associated tectonic and magmatic activity, Elysium Planitia is a compelling target for future exploration.

Elysium Planitia, Mars↗
USGS1998

Gas hydrates in the Messoyakha gas field of the West Siberian Basin - A re-examination of the geologic evidence

The amount of natural gas within the gas hydrate accumulations of the world is believed to greatly exceed the volume of known conventional natural gas reserves. The hydrocarbon production history of the Russian Messoyakha field, located in the West Siberian Basin, has been used as evidence that gas hydrates are an immediate source of natural gas that can be produced by conventional means. Re-examination of available geologic, geochemical and hydrocarbon production data suggests, however, that gas hydrates may not have contributed to gas production in the Messoyakha field. More field and laboratory studies are needed to assess the historical contribution of gas hydrate production in the Messoyakha field.

International Journal of Offshore and Polar Engine↗
USGS2009

HRSC: High resolution stereo camera

The High Resolution Stereo Camera (HRSC) on Mars Express has delivered a wealth of image data, amounting to over 2.5 TB from the start of the mapping phase in January 2004 to September 2008. In that time, more than a third of Mars was covered at a resolution of 10-20 m/pixel in stereo and colour. After five years in orbit, HRSC is still in excellent shape, and it could continue to operate for many more years. HRSC has proven its ability to close the gap between the low-resolution Viking image data and the high-resolution Mars Orbiter Camera images, leading to a global picture of the geological evolution of Mars that is now much clearer than ever before. Derived highest-resolution terrain model data have closed major gaps and provided an unprecedented insight into the shape of the surface, which is paramount not only for surface analysis and geological interpretation, but also for combination with and analysis of data from other instruments, as well as in planning for future missions. This chapter presents the scientific output from data analysis and highlevel data processing, complemented by a summary of how the experiment is conducted by the HRSC team members working in geoscience, atmospheric science, photogrammetry and spectrophotometry. Many of these contributions have been or will be published in peer-reviewed journals and special issues. They form a cross-section of the scientific output, either by summarising the new geoscientific picture of Mars provided by HRSC or by detailing some of the topics of data analysis concerning photogrammetry, cartography and spectral data analysis.

Conference Paper↗
USGS2014

Volcanic tremor masks its seismogenic source: Results from a study of noneruptive tremor recorded at Mount St. Helens, Washington

On 2 October 2004, a significant noneruptive tremor episode occurred during the buildup to the 2004–2008 eruption of Mount St. Helens (Washington). This episode was remarkable both because no explosion followed, and because seismicity abruptly stopped following the episode. This sequence motivated us to consider a model for volcanic tremor that does not involve energetic gas release from magma but does involve movement of conduit magma through extension on its way toward the surface. We found that the tremor signal was composed entirely of Love and Rayleigh waves and that its spectral bandwidth increased and decreased with signal amplitude, with broader bandwidth signals containing both higher and lower frequencies. Our modeling results demonstrate that the forces giving rise to this tremor were largely normal to conduit walls, generating hybrid head waves along conduit walls that are coupled to internally reflected waves. Together these form a crucial part of conduit resonance, giving tremor wavefields that are largely a function of waveguide geometry and velocity. We find that the mechanism of tremor generation fundamentally masks the nature of the seismogenic source giving rise to resonance. Thus multiple models can be invoked to explain volcanic tremor, requiring that information from other sources (such as visual observations, geodesy, geology, and gas geochemistry) be used to constrain source models. With concurrent GPS and field data supporting rapid rise of magma, we infer that tremor resulted from drag of nearly solid magma along rough conduit walls as magma was forced toward the surface.

Washington↗