Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geological & Geophysical Surveys”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78Linked to original sources
USGS1996

Estimated depth to the water table and estimated rate of recharge in outcrops of the Chicot and Evangeline aquifers near Houston, Texas

In 1989, the U.S. Geological Survey, in cooperation with the Harris-Galveston Coastal Subsidence District, began a field study to determine the depth to the water table and to estimate the rate of recharge in outcrops of the Chicot and Evangeline aquifers near Houston, Texas. The study area comprises about 2,000 square miles of outcrops of the Chicot and Evangeline aquifers in northwest Harris County, Montgomery County, and southern Walker County. Because of the scarcity of measurable water-table wells, depth to the water table below land surface was estimated using a surface geophysical technique, seismic refraction. The water table in the study area generally ranges from about 10 to 30 foot below land surface and typically is deeper in areas of relatively high land-surface altitude than in areas of relatively low land- surface altitude. The water table has demonstrated no long-term trends since ground-water development began, with the probable exception of the water table in the Katy area: There the water table is more than 75 feet deep, probably due to ground-water pumpage from deeper zones. An estimated rate of recharge in the aquifer outcrops was computed using the interface method in which environmental tritium is a ground-water tracer. The estimated average total recharge rate in the study area is 6 inches per year. This rate is an upper bound on the average recharge rate during the 37 years 1953-90 because it is based on the deepest penetration (about 80 feet) of postnuclear-testing tritium concentrations. The rate, which represents one of several components of a complex regional hydrologic budget, is considered reasonable but is not definitive because of uncertainty regarding the assumptions and parameters used in its computation.

Texas↗
USGS2006

Spirit rover localization and topographic mapping at the landing site of Gusev crater, Mars

By sol 440, the Spirit rover has traversed a distance of 3.76 km (actual distance traveled instead of odometry). Localization of the lander and the rover along the traverse has been successfully performed at the Gusev crater landing site. We localized the lander in the Gusev crater using two-way Doppler radio positioning and cartographic triangulations through landmarks visible in both orbital and ground images. Additional high-resolution orbital images were used to verify the determined lander position. Visual odometry and bundle adjustment technologies were applied to compensate for wheel slippage, azimuthal angle drift, and other navigation errors (which were as large as 10.5% in the Husband Hill area). We generated topographic products, including 72 ortho maps and three-dimensional (3-D) digital terrain models, 11 horizontal and vertical traverse profiles, and one 3-D crater model (up to sol 440). Also discussed in this paper are uses of the data for science operations planning, geological traverse surveys, surveys of wind-related features, and other science applications.

Journal of Geophysical Research E: Planets↗
USGS1963

Natural radioactivity in Washington County, Maryland

Natural gamma- radioactivity patterns in Washington County , Maryland , reflect the principal variations in lithology. The highest radioactivity is associated with the more argillaceous parts of the geologic section and with soils derived from high-potassium carbonate rocks. Surface radiation intensity ranges from about 5 to 30 microroentgens per hour, of which the rocks contribute 30 to 90 percent. From the aerial survey data, the surface radiation intensity from extended sources can be estimated to within about three microroentgens per hour and the equivalent uranium content can be estimated to within approximately 5 ppm.

Maryland↗
USGS2007

Seismic Shear Wave Reflection Imaging at the Former Fort Ord, Monterey, California

At the former Fort Ord in Monterey County, California, contamination threatens an aquifer that provides drinking water for local communities. Assessment and remediation require accurate hydrological modeling, which in turn require a thorough understanding of aquifer stratigraphy. In order to help guide remediation efforts at the site, the U.S. Geological Survey, in cooperation with the U.S. Army Corps of Engineers, has undertaken seismic reflection surveys, testing compressional (P) and horizontally polarized shear (SH) waves. Sledgehammer-source SH data show reflections from interfaces up to approximately 60 m deep, which correspond with the major boundaries between aquifers and aquitards. In contrast, P-wave data show only the reflection from the water table at approximately 30 m depth. We collected SH data along two transects and processed these data to produce reflection images. The interpreted SH-wave images agree with available well information, constrain the geology for ground-water models, and provide guidance for future geophysical studies. These favorable results demonstrate the effectiveness of SH reflection methods for imaging unconsolidated aquifer layers at the former Fort Ord and at other sites with similar geologic conditions.

Open-File Report↗
USGS2014

Stitching the western Piedmont of Virginia: Early Paleozoic tectonic history of the Ellisville Pluton and the Potomac and Chopawamsic Terranes

The theme of the 2014 Virginia Geological Field Conference is the tectonic development, economic geology, and seismicity of the western Piedmont of Louisa County, Virginia. It is timely for the conference to turn its attention here, for during the past decade these aspects of western Piedmont geology have garnered the renewed attention of researchers. In terms of regional tectonics, it has been hypothesized that the major structure in the region, the Chopawamsic fault system, represents the most significant boundary in the Appalachian orogen, the main Iapetan suture (Hibbard et al., 2014). Economically, recent elevated market values of metals— particularly that of gold—has spurred reconsideration of the economic geology of the western Piedmont. Finally, the August 23, 2011, M5.8 earthquake, with its epicenter in our field area, startled the North American east coast and has revived awareness of the seismic potential of the region. This renewed interest in the geology of the western Piedmont of north-central Virginia has led to new detailed bedrock mapping, detailed surficial mapping, high-resolution UPb TIMS zircon geochronology, U-Pb LA-ICPMS detrital zircon geochronology, radiogenic isotope geochemistry, major/minor/REE geochemistry, and geophysical studies (e.g. Bailey et al., 2005, 2008; Bailey and Owens, 2012: Berti et al., 2012; Burton et al., 2014; Burton, in progress; Harrison, 2012; Horton et al., 2010, in press; Hughes, 2010, 2014; Hughes et al., 2013a, 2013b, 2014, in press a, in press b; Malenda, in progress; Owens et al., 2013; Spears and Gilmer 2012; Spears et al. 2013, Terblanche, 2013; Terblanche and Nance, 2012). A host of institutions have taken part in the research, including North Carolina State University, the Virginia Department of Mines, Minerals, and Energy, the U.S. Geological Survey, Virginia Tech, Lehigh University, and the College of William and Mary. Many of these investigations remain active. The majority of the data presented herein is the product of research conducted from 2010 to 2014 by geologists at North Carolina State University. This field trip guide is intended to complement a Geological Society of America field guide (Hughes et al., 2014) that covers the western Piedmont geology along strike to the northeast in the vicinity of Fredericksburg. Geologic mapping and geochronologic and geochemical sampling were coordinated between these two areas as part of a study funded in part by the National Science Foundation and the USGS EDMAP program. Some of the stops in this guide have previously been written up in past field guides (Hughes, 2010; Burton et al., 2014) and are reused here because of their ease of access for large groups and because of new data that update the context and our understanding of the outcrops.

Virginia↗
USGS2006

Applications of geophysical methods to volcano monitoring

The array of geophysical technologies used in volcano hazards studies - some developed originally only for volcano monitoring - ranges from satellite remote sensing including InSAR to leveling and EDM surveys, campaign and telemetered GPS networks, electronic tiltmeters and strainmeters, airborne magnetic and electromagnetic surveys, short-period and broadband seismic monitoring, even microphones tuned for infrasound. They include virtually every method used in resource exploration except large-scale seismic reflection. By “geophysical ” we include both active and passive methods as well as geodetic technologies. Volcano monitoring incorporates telemetry to handle high-bandwith cameras and broadband seismometers. Critical geophysical targets include the flux of magma in shallow reservoir and lava-tube systems, changes in active hydrothermal systems, volcanic edifice stability, and lahars. Since the eruption of Mount St. Helens in Washington State in 1980, and the eruption at Pu’u O’o in Hawai’i beginning in 1983 and still continuing, dramatic advances have occurred in monitoring technology such as “crisis GIS” and lahar modeling, InSAR interferograms, as well as gas emission geochemistry sampling, and hazards mapping and eruption predictions. The on-going eruption of Mount St. Helens has led to new monitoring technologies, including advances in broadband Wi-Fi and satellite telemetry as well as new instrumentation. Assessment of the gap between adequate monitoring and threat at the 169 potentially dangerous Holocene volcanoes shows where populations are dangerously exposed to volcanic catastrophes in the United States and its territories . This paper focuses primarily on Hawai’ian volcanoes and the northern Pacific and Cascades volcanoes. The US Geological Survey, the US National Park System, and the University of Utah cooperate in a program to monitor the huge Yellowstone volcanic system, and a separate observatory monitors the restive Long Valley caldera in collaboration with the US Forest Service.

Conference Paper↗
USGS2010

Western Mineral and Environmental Resources Science Center--providing comprehensive earth science for complex societal issues

Minerals in the environment and products manufactured from mineral materials are all around us and we use and come into contact with them every day. They impact our way of life and the health of all that lives. Minerals are critical to the Nation's economy and knowing where future mineral resources will come from is important for sustaining the Nation's economy and national security. The U.S. Geological Survey (USGS) Mineral Resources Program (MRP) provides scientific information for objective resource assessments and unbiased research results on mineral resource potential, production and consumption statistics, as well as environmental consequences of mining. The MRP conducts this research to provide information needed for land planners and decisionmakers about where mineral commodities are known and suspected in the earth's crust and about the environmental consequences of extracting those commodities. As part of the MRP scientists of the Western Mineral and Environmental Resources Science Center (WMERSC or 'Center' herein) coordinate the development of national, geologic, geochemical, geophysical, and mineral-resource databases and the migration of existing databases to standard models and formats that are available to both internal and external users. The unique expertise developed by Center scientists over many decades in response to mineral-resource-related issues is now in great demand to support applications such as public health research and remediation of environmental hazards that result from mining and mining-related activities. Western Mineral and Environmental Resources Science Center Results of WMERSC research provide timely and unbiased analyses of minerals and inorganic materials to (1) improve stewardship of public lands and resources; (2) support national and international economic and security policies; (3) sustain prosperity and improve our quality of life; and (4) protect and improve public health, safety, and environmental quality. The MRP supports approximately 40 USGS research specialists who utilize cooperative agreements with universities, industry, and other governmental agencies to support their collaborative research and information exchange. Scientists of the WMERSC study how and where non-fuel mineral resources form and are concentrated in the earth's crust, where mineral resources might be found in the future, and how mineral materials interact with the environment to affect human and ecosystem health. Natural systems (ecosystems) are complex - our understanding of how ecosystems operate requires collecting and synthesizing large amounts of geologic, geochemical, biologic, hydrologic, and meteorological information. Scientists in the Center strive to understand the interplay of various processes and how they affect the structure, composition, and health of ecosystems. Such understanding, which is then summarized in publicly available reports, is used to address and solve a wide variety of issues that are important to society and the economy. WMERSC scientists have extensive national and international experience in these scientific specialties and capabilities - they have collaborated with many Federal, State, and local agencies; with various private sector organizations; as well as with foreign countries and organizations. Nearly every scientific and societal challenge requires a different combination of scientific skills and capabilities. With their breadth of scientific specialties and capabilities, the scientists of the WMERSC can provide scientifically sound approaches to a wide range of societal challenges and issues. The following sections describe examples of important issues that have been addressed by scientists in the Center, the methods employed, and the relevant conclusions. New directions are inevitable as societal needs change over time. Scientists of the WMERSC have a diverse set of skills and capabilities and are proficient in the collection and integration of

Circular↗
USGS2016

Altitudes and thicknesses of hydrogeologic units of the Ozark Plateaus aquifer system in Arkansas, Kansas, Missouri, and Oklahoma

A hydrogeologic framework was constructed to represent the altitudes and thicknesses of hydrogeologic units within the Ozark Plateaus aquifer system as part of a regional groundwater-flow model supported by the U.S. Geological Survey Water Availability and Use Science Program. The Ozark Plateaus aquifer system study area is nearly 70,000 square miles and includes parts of Arkansas, Kansas, Missouri, and Oklahoma. Nine hydrogeologic units were selected for delineation within the aquifer system and include the Western Interior Plains confining system, the Springfield Plateau aquifer, the Ozark confining unit, the Ozark aquifer, which was divided into the upper, middle, and lower Ozark aquifers to better capture the spatial variation in the hydrologic properties, the St. Francois confining unit, the St. Francois aquifer, and the basement confining unit. Geophysical and well-cutting logs, along with lithologic descriptions by well drillers, were compiled and interpreted to create hydrologic altitudes for each unit. The final compiled dataset included more than 23,000 individual altitude points (excluding synthetic points) representing the nine hydrogeologic units within the Ozark Plateaus aquifer system.

Arkansas, Kansas, Missouri, Oklahoma↗
USGS2018

Analysis ready data: Enabling analysis of the Landsat archive

Data that have been processed to allow analysis with a minimum of additional user effort are often referred to as Analysis Ready Data (ARD). The ability to perform large scale Landsat analysis relies on the ability to access observations that are geometrically and radiometrically consistent, and have had non-target features (clouds) and poor quality observations flagged so that they can be excluded. The United States Geological Survey (USGS) has processed all of the Landsat 4 and 5 Thematic Mapper (TM), Landsat 7 Enhanced Thematic Mapper Plus (ETM+), Landsat 8 Operational Land Imager (OLI) and Thermal Infrared Sensor (TIRS) archive over the conterminous United States (CONUS), Alaska, and Hawaii, into Landsat ARD. The ARD are available to significantly reduce the burden of pre-processing on users of Landsat data. Provision of pre-prepared ARD is intended to make it easier for users to produce Landsat-based maps of land cover and land-cover change and other derived geophysical and biophysical products. The ARD are provided as tiled, georegistered, top of atmosphere and atmospherically corrected products defined in a common equal area projection, accompanied by spatially explicit quality assessment information, and appropriate metadata to enable further processing while retaining traceability of data provenance.

Remote Sensing↗
USGS2004

Results of Electrical Resistivity Data Collected near the Town of Guernsey, Platte County, Wyoming

As part of a study to investigate subsurface geologic conditions as they relate to ground-water flow in an abandoned landfill near the town of Guernsey, Wyoming, geophysical direct current (DC) resistivity data were collected. Eight vertical resistivity soundings and eight horizontal resistivity profiles were made using single channel and multi-channel DC instruments. Data collected in the field were converted from apparent resistivity to inverted resistivity with depth using a numerical inversion of the data. Results of the inverted resistivity data are presented as horizontal profiles and as profiles derived from the combined horizontal profile and vertical sounding data. The data sets collected using the single-channel and multi-channel DC systems provided for the resistivity investigation to extend to greater depth. Similarity of the electrical properties of the bedrock formations made interpretation of the resistivity profiles more difficult. High resistivity anomalies seen in the profiles are interpreted as quartzite lenses and as limestone or metadolomite structures in the eastern part of the study area. Terrace gravels were mapped as resistive where dry and less resistive in the saturated zone. The DC resistivity methods used in this study illustrate that multi-electrode DC resistivity surveying and more traditional methodologies can be merged and used to efficiently map anomalies of hydrologic interest in geologically complex terrain.

Open-File Report↗
USGS2015

Hexavalent and total chromium at low reporting concentrations in source-water aquifers and surface waters used for public supply in Illinois, 2013

On the basis of their recent review of the human health effects of hexavalent chromium [Cr(VI)] in public drinking water, the U.S. Environmental Protection Agency is considering the need for Federal regulation of Cr(VI). Presently, only total chromium is regulated, at a Maximum Contaminant Level (MCL) of 100 micrograms per liter (µg/L). The occurrence of Cr(VI) in groundwater and surface waters generally is attributed to industrial sources, but can be of natural origin. California’s recently established MCL for Cr(VI) of 10 µg/L illustrates the drinking-water concerns associated with Cr(VI). To improve understanding of the possible impact of a Cr(VI)-specific standard that approximates the California level on the management of Illinois’ public drinking water, the U.S. Geological Survey, in cooperation with the Illinois Environmental Protection Agency, assessed the occurrence and distribution of Cr(VI) in the State’s public-water supplies. During 2013, untreated water samples were collected to be analyzed for Cr(VI) and total chromium [Cr(T)] at 119 water-supply wells and 32 surface-water intakes; also, 32 treated surface-water samples were collected near the point of treatment and 32 near the furthest point of distribution. Public-supply sample sites were selected by a stratified random method. Samples typically were analyzed within 24 hours of collection at reporting limits of 0.02 µg/L for Cr(VI) and 0.1 µg/L for Cr(T). The occurrence of Cr(VI) was compared with selected geophysical, physical, and sampling factors that might more fully explain its distribution and magnitude of concentrations. The maximum concentration of Cr(VI) in groundwater was 2.1 µg/L. Maximum concentrations in untreated and treated surface water were 0.29 µg/L and 2.4 µg/L, respectively. All sample concentrations were below the California MCL; only 35 percent were below that State’s non-enforceable public health goal of 0.02 of µg/L. Cr(VI) was undetected in 43 percent of untreated groundwater samples, with a median of 0.06 µg/L when detected. All but two (94 percent) of untreated surface-water samples had detections. In untreated surface water, the median concentration was 0.09 µg/L, whereas in treated (tap and distributed) water the median was 0.20 µg/L. Surface waters treated with lime for softening typically had the greatest Cr(VI) concentrations (maximum, 2.4 µg/L; median, 1.2 µg/L). The maximum concentration of Cr(T) in groundwater was 1.8 µg/L. Maximum concentrations in untreated and treated surface water were 1.8 µg/L and 2.5 µg/L, respectively. All sample concentrations were below the Federal MCL. Total chromium was detected in 65 percent of untreated groundwater samples, with a median of 0.40 µg/L, when detected. All but one (97 percent) of untreated surface-water samples had detections. In untreated surface water, the median concentration was 0.40 µg/L, whereas in treated (tap and distributed) water the median was 0.30 µg/L. As with Cr(VI), surface waters treated with lime typically had the greatest Cr(T) concentrations. Examination of factors that might account for or be associated with the occurrence of Cr(VI) in public-supply source waters found few clearly evident factors. Associations in frequencies of occurrence and range of concentrations indicate that surface waters and groundwaters of shallow, unconsolidated, unconfined aquifers, particularly alluvial aquifers, are possibly most commonly affected by anthropogenic sources of Cr(VI). Groundwaters of deep (greater than 500 feet) bedrock aquifers, particularly the Cambrian-Ordovician aquifer system, are possibly most commonly affected by geologic sources of Cr(VI). Additional study, with supporting geologic and geochemical data that were not collected in this study, would be necessary to verify these associations. There was a weak positive relation (ρ = 0.23) between concentrations of Cr(VI) and Cr(T) in untreated water samples, with a much stronger positive relation (ρ = 0.86 and ρ = 0.90, respectively) in samples collected soon after treatment and near the endpoint of distribution. The stronger relation and greater similarity between Cr(VI) and Cr(T) concentrations in treated water samples indicate that Cr(VI) represents a greater proportion of the measured concentrations of Cr(T) in treated waters than in untreated waters. The analysis of spikes and other quality-assurance samples indicate uncertainties associated with obtaining or confirming consistently accurate analytical results for Cr(VI) at near the applied reporting limit of 0.02 µg/L.

Illinois↗
USGS2015

Hydrogeologic data and water-quality data from a thick unsaturated zone at a proposed wastewater-treatment facility site, Yucca Valley, San Bernardino County, California, 2008-11

The Hi-Desert Water District, in the community of Yucca Valley, California, is considering constructing a wastewater-treatment facility and using the reclaimed water to recharge the aquifer system through surface spreading. The Hi-Desert Water District is concerned with possible effects of this recharge on water quality in the underlying groundwater system; therefore, an unsaturated-zone monitoring site was constructed by the U.S. Geological Survey (USGS) to characterize the unsaturated zone, monitor a pilot-scale recharge test, and, ultimately, to monitor the flow of reclaimed water to the water table once the treatment facility is constructed. In June and July 2008, a borehole (YVUZ-5) was drilled by the USGS through the unsaturated zone in the vicinity of the proposed wastewater-treatment facility site by using an overburden drilling method. In addition to a variety of unsaturated-zone instrumentation, an observation well screened near the water table was installed in the borehole. The drilling procedures, lithologic and geophysical data, construction details, physical properties of unsaturated alluvial deposits, and instrumentation installed in YVUZ-5 are described in this report. Core material was analyzed for bulk-density, porosity, effective porosity, volumetric water content, residual water content, saturation, effective saturation, matric-potential, and saturated hydraulic conductivity. Concentrations of soluble anions, including bromide, chloride, fluoride, sulfate, nitrate, nitrite, phosphate, and orthophosphate, in unsaturated-zone sediment and dissolved in unsaturated-zone water were determined by analyzing water extracted from drill-cutting material. A 0.1-acre pilot-scale infiltration pond was constructed in the vicinity of YVUZ-5. Water was applied to the pond over a period of about 8 months and allowed to infiltrate into the underlying unsaturated zone. Data were collected on chemical and isotopic composition of the groundwater, unsaturated-zone water, and infiltration pond water before, during, and after infiltration of water from the constructed pond. Selected drill cuttings and core samples collected during drilling were analyzed for the presence or absence of denitrifying and nitrate-reducing bacteria. Water levels in the observation well ranged from about 367 to 370 feet below land surface during the period of the study. Measured saturated hydraulic conductivity of core material ranged from 2.1 to 11.0 feet per day. Average vertical infiltration rates in the pilot-scale infiltration pond ranged from 0.7 to 2.4 feet per day. Both denitrifying and nitrate-reducing bacteria were present in drill cutting material in most probable numbers ranging from below detection limits to 2,400,000 for denitrifying and to 93,000 for nitrate-reducing bacteria.

California↗
USGS2013

Borehole geophysical, fluid, and hydraulic properties within and near the freshwater/saline-water transition zone, San Antonio segment of the Edwards aquifer, south-central Texas, 2010-11

The freshwater zone of the San Antonio segment of the Edwards aquifer is used by residents of San Antonio and numerous other rapidly growing communities in south-central Texas as their primary water supply source. This freshwater zone is bounded to the south and southeast by a saline-water zone with an intermediate zone transitioning from freshwater to saline water (transition zone). As demands on this water supply increase, there is concern that the transition zone could potentially move, resulting in more saline water in current freshwater supply wells. Since 1985, the U.S. Geological Survey, San Antonio Water System, and other Federal and State agencies have conducted studies to better understand the transition zone.

Texas↗
USGS2007

Selected Hydrogeologic Data for the High Plains Aquifer in Southwestern Laramie County, Wyoming, 1931-2006

The U.S. Geological Survey, in cooperation with the Wyoming State Engineer's Office, created a hydrogeologic database for southwestern Laramie County, Wyoming. The database contains records from 166 wells and test holes drilled during 1931-2006. Several types of information, including well construction; well or test hole locations; lithologic logs; gamma, neutron, spontaneous-potential, and single-point resistivity logs; water levels; and transmissivities and storativities estimated from aquifer tests, are available in the database. Most wells and test holes in the database have records containing information about construction, location, and lithology; 77 wells and test holes have geophysical logs; 70 wells have tabulated water-level data; and 60 wells have records of aquifer-test results.

Open-File Report↗
USGS2011

Kirschenmann Road multi-well monitoring site, Cuyama Valley, Santa Barbara County, California

The U.S. Geological Survey (USGS), in cooperation with the Water Agency Division of the Santa Barbara County Department of Public Works, is evaluating the geohydrology and water availability of the Cuyama Valley, California (fig. 1). As part of this evaluation, the USGS installed the Cuyama Valley Kirschenmann Road multiple-well monitoring site (CVKR) in the South-Main subregion of the Cuyama Valley (fig. 1). The CVKR well site is designed to allow for the collection of depth-specific water-level and water-quality data. Data collected at this site provides information about the geology, hydrology, geophysics, and geochemistry of the local aquifer system, thus, enhancing the understanding of the geohydrologic framework of the Cuyama Valley. This report presents the construction information and initial geohydrologic data collected from the CVKR monitoring site, along with a brief comparison to selected supply and irrigation wells from the major subregions of the Cuyama Valley (fig. 1).

California↗
USGS2014

Time-domain electromagnetic surveys at Fort Irwin, San Bernardino County, California, 2010–12

Between 2010 and 2012, a total of 79 time-domain electromagnetic (TEM) soundings were collected in 12 groundwater basins in the U.S. Army Fort Irwin National Training Center (NTC) study area to help improve the understanding of the hydrogeology of the NTC. The TEM data are discussed in this chapter in the context of geologic observations of the study area, the details of which are provided in the other chapters of this volume. Selection of locations for TEM soundings in unexplored basins was guided by gravity data that estimated depth to pre-Tertiary basement complex of crystalline rock and alluvial thickness. Some TEM data were collected near boreholes with geophysical logs. The TEM response at locations near boreholes was used to evaluate sounding data for areas without boreholes. TEM models also were used to guide site selection of subsequent boreholes drilled as part of this study. Following borehole completion, geophysical logs were used to ground-truth and reinterpret previously collected TEM data. This iterative process was used to site subsequent TEM soundings and borehole locations as the study progressed. Although each groundwater subbasin within the NTC boundaries was explored using the TEM method, collection of TEM data was focused in those basins identified as best suited for development of water resources. At the NTC, TEM estimates of some lithologic thicknesses and electrical properties in the unsaturated zone are in good accordance with borehole data; however, water-table elevations were not easily identifiable from TEM data.

California↗
USGS1979

An experimental ground-magnetic and VLF-EM traverse over a buried paleochannel near Salisbury, Maryland

Since, 1963, the Maryland Geological Survey and the U.S. Geological Survey have been engaged in a study of the Pleistocene Series beneath a 230 square kilometer area around Salisbury, Maryland. (Hansen, 1966; Weigle, 1972; Zohdy and others, 1974, p.56) North of Salisbury a deep Pleistocene paleochannel was discovered; this channel was carved into an erosional plain at the top of the Miocene deposit, was filled and blanketed subsequently with deposits (mostly sand and gravel) of Pleistocene age. The channel is a prolific source of ground water, and has been outlined for a least 15 kilometers by means of power-augering and gamma-logging. A geophysical survey using ground magnetics and VLF-EM was made over the channel in an attempt to see if a more efficient method than augering could be developed to map the paleochannel at depth; the survey traverse was made over one of the better defined parts of the paleochannel (see figure 1.) where airborne magnetics and VLF studies could easily be done as a potential follow-up. We hoped to be able to map resistivity changes between aquifer and aquiclude facies with the VLF-EM, and perhaps identify other facies changes in black-sand concentrations with ground magnetics. The data is presented in Table 1 and plotted in figure 2. The traverse extended from north to south, with station spacing of 100 meters, for an over all length of 4.5 kilometers.

Maryland↗
USGS2021

Hydrogeology and gain/loss assessment of two lakes contaminated with per- and polyfluoroalkyl substances, vicinity of Joint Base McGuire-Dix-Lakehurst, New Jersey, 2020–21

Per- and polyfluoroalkyl substances (PFAS) have been identified in two lakes near Joint Base McGuire-Dix-Lakehurst (JBMDL) in New Jersey—Little Pine Lake in Pemberton Township and Pine Lake in Manchester Township. The streams that enter these lakes begin in or near JBMDL where sources of PFAS contamination are located. The U.S. Geological Survey, in cooperation with the U.S. Air Force Civil Engineer Center, performed a study of the hydrogeology and the gaining or losing conditions associated with these lakes. Hydrogeologic characteristics in the vicinity of both lakes were assessed using qualitative vertical hydraulic profiling of the subsurface. Groundwater was pumped from test intervals at various depths below land surface, then groundwater levels were measured until they recovered to static conditions. Low permeability aquifer intervals were identified within the aquifer underlying both lakes, consistent with silty and (or) clayey subunits of the Kirkwood-Cohansey aquifer system indicated on geophysical and lithologic logs. Gaining or losing conditions between groundwater and lake surface water were assessed with continuous monitoring of water levels and temperature in the lakes and in three piezometers per lake screened at different depths in the underlying aquifer from August 2020 through May 2021. At Little Pine Lake, surface water levels were consistently lower than groundwater levels, which is indicative of a gaining condition with groundwater flowing into the lake. Gaining conditions also support the lack of diurnal temperature fluctuations observed in groundwater, but poor response of surface-water temperature prevents complete analysis. The potential for losing conditions at other locations around Little Pine Lake necessitates further assessment in regard to possible PFAS contamination of groundwater in the underlying aquifer. Temperature results were inconclusive at Pine Lake, but surface water levels were consistently higher than groundwater levels throughout the monitoring period, which indicates a losing condition with lake water flowing into the underlying aquifer. Because of the downward vertical hydraulic gradient identified at Pine Lake, there is a strong possibility that PFAS in the lake water has also contaminated groundwater in its vicinity.

New Jersey↗