Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Diversity and Distributions”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78Linked to original sources
USGS2018

Understanding the influence of nutrients on stream ecosystems in agricultural landscapes

Sustaining the quality of the Nation’s water resources and the health of our diverse ecosystems depends on the availability of sound water-resources data and information to develop effective, science-based policies. Effective management of water resources also brings more certainty and efficiency to important economic sectors. Taken together, these actions lead to immediate and long-term economic, social, and environmental benefits that make a difference to the lives of the almost 400 million people projected to live in the United States by 2050. In 1991, Congress established the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) to address where, when, why, and how the Nation’s water quality has changed, or is likely to change in the future, in response to human activities and natural factors. Since then, NAWQA has been a leading source of scientific data and knowledge used by national, regional, State, and local agencies to develop science-based policies and management strategies to improve and protect water resources used for drinking water, recreation, irrigation, energy development, and ecosystem needs ( https://water.usgs.gov/nawqa/applications/ ). Plans for the third decade of NAWQA (2013–23) address priority water-quality issues and science needs identified by NAWQA stakeholders, such as the Advisory Committee on Water Information and the National Research Council, and are designed to meet increasing challenges related to population growth, increasing needs for clean water, and changing land-use and weather patterns. Excess nutrients are a pervasive problem of streams, lakes, and coastal waters. The current report, “The Quality of Our Nation’s Waters—Understanding the Effects of Nutrients on Stream Ecosystems in Agricultural Landscapes,” presents a summary of results from USGS investigations conducted from 2003 to 2011 on processes that influence nutrients and how nutrient enrichment can alter biological components of agricultural streams. This study included collecting data from 232 sites distributed among eight study areas. This report summarizes findings on processes that influence nutrients and how nutrient enrichment can alter biological communities in agricultural streams. These findings are relevant to local, State, regional, and national decision-makers involved in efforts to (1) better understand the influence of nutrients on agricultural streams, (2) develop nutrient criteria for streams and rivers, (3) reduce nutrients to streams and downstream receiving waters, and (4) develop tools for tracking nutrient and biological conditions following nutrient reduction strategies. All NAWQA reports are available online at https://water.usgs.gov/nawqa/bib/ . We hope this publication will provide you with insights and information to meet your water-resource needs and will foster increased citizen awareness and involvement in the protection and restoration of our Nation’s waters. The information in this report is intended primarily for those interested or involved in resource management and protection, conservation, regulation, and policymaking at the regional and national levels.

Central Columbia-Yakima River Basins, Great River ↗
USGS2024

Ground deformation and gravity for volcano monitoring

Introduction When magma accumulates or migrates, it can cause pressurization and related ground deformation. Characterization of surface deformation provides important constraints on the potential for future volcanic activity, especially in combination with seismic activity, gas emissions, and other indicators. A wide variety of techniques and instrument types have been applied to the study of ground deformation at volcanoes (sidebar, p. 2; Dzurisin, 2000, 2003, 2007). Geodetic instruments include continuously recording Global Navigation Satellite System (GNSS; of which the United States’ Global Positioning System is one example) stations (fig. D1), borehole tiltmeters, and interferometric synthetic aperture radar (InSAR) measurements (from satellites, occupied and unoccupied aircraft systems, and ground-based sensors). Additional geodetic measurements like continuous- and survey-mode gravity (fig. D2) can contribute substantially to interpreting these data. Borehole strainmeters (see chapter K , this volume, by Hurwitz and Lowenstern, 2024) also have outstanding utility for monitoring deformation, although because of cost and permitting challenges, we do not include them as part of standard volcano monitoring networks for U.S. volcanoes. Still other techniques like light detection and ranging (lidar), structure from motion, and optical satellite data can be used to derive gross topographic changes, which can be used to map volcanic deposits, infer eruption rates, and gain insights into the source processes associated with eruptive activity (see chapter G , this volume, on tracking surface changes caused by volcanic activity; Orr and others, 2024). Experience has shown that no single geodetic monitoring technique is adequate to detect and track the entire range of ground-motion patterns that occur at volcanoes, primarily because of the temporal and spatial diversity of volcano deformation (fig. D3). Similarly, the magnitude of surface deformation varies widely. Geodetic monitoring strategies should therefore include multiple techniques and instrument types to cover a wide range of spatial and temporal scales. In identifying recommendations for geodetic instrumentation for volcano monitoring networks, we attempted to maximize the diversity of instrument types to measure the full range of deformation signals and minimize their expense and number; thus, we do not include several well-known deformation-monitoring techniques in our recommendations. Extensometers, for example, measure strains over distances of a few meters and have an excellent record of success in detecting changes in preeruptive localized ground motion across existing cracks, including at Mount St. Helens, Washington (Iwatsubo and others, 1992), and Piton de la Fournaise, Réunion Island (Peltier and others, 2006). Despite being relatively inexpensive, extensometers are best used primarily when localized ground displacements (for example, ground cracks) need to be tracked, and are not necessary at all volcanoes. In considering volcano deformation monitoring strategies, two complicating factors are deserving of special attention. First, not all deformation is driven by subsurface magmatic activity—for example, at many large stratovolcanoes (for example, Mount Rainier), flank collapses and landslides are significant geologic hazards (Reid and others, 2001) that may occur even in the absence of magmatic activity. Monitoring the stability of volcanoes is thus another critical application of geodetic monitoring networks to inform hazard assessment. One of the most famous examples of edifice instability is the large flank collapse that initiated the May 18, 1980, eruption of Mount St. Helens. Deformation monitoring had detected a bulge on the north flank of the mountain in April 1980 that was expanding by several meters per day (Lipman and others, 1981). Given that flank collapses can happen at any time during a period of volcanic unrest (or even outside a period of unrest), the capability to assess edifice stability is critical. Second, although volcanoes are commonly treated as idealized structures that erupt from single points, like centralvent stratovolcanoes, many are characterized by long rift zones from which eruptions may originate, and distributed volcanic fields are characterized by broadly spaced vents. For example, linear dikes are common at Kīlauea, Mauna Loa, and between Mount Shasta and Medicine Lake in California. At Kīlauea, one of these linear dikes emerged more than 40 kilometers (km) away from the summit of the volcano during the lower East Rift Zone eruption in 2018. Other volcanic fields, like Lassen volcanic center, California, or the San Francisco Volcanic Field, Arizona, have many small vents spread over a wide area. Although the instrumentation guidelines presented in this chapter remain phrased for central-vent volcanoes, they should be modified as needed in the context of the eruptive characteristics of each individual volcanic system. Spatial analysis of geodetic network coverage could help to ensure adequate instrumentation in areas where volcanism can occur over a broad area as opposed to a central vent. As an example, consider the adjacent volcanoes Mount Shasta and Medicine Lake. If station locations are chosen based only on the distance from the centers of the volcanoes, then any geodetic anomalies between the two volcanoes—an area of potential volcanism as indicated by the presence of volcanic features—may remain undetected by ground-based instrumentation. The spatial analysis is accomplished via a grid of pressure point sources (Mogi, 1958) evenly distributed across the map area, at a depth of 5 km in this example (fig. D4). Each source is inflated until predicted deformations exceed the GNSS white noise uncertainty estimates at one site (Langbein, 2017; Murray and Svarc, 2017). This volume of detectable magma provides a measure of the quality of the coverage (fig. D4). The results indicate that, as of 2022, there is a large area between Mount Shasta and Medicine Lake volcano with existing mapped dikes in which a substantial amount of magma could intrude without being detected geodetically. Applying this style of analysis to individual volcanic systems can provide a guide for designing network geometry given the expected locations of future eruptions.

Scientific Investigations Report↗
USGS2013

Traces in the dark: sedimentary processes and facies gradients in the upper shale member of the Upper Devonian-Lower Mississippian Bakken Formation, Williston Basin, North Dakota, U.S.A.

Black, organic-rich rocks of the upper shale member of the Upper Devonian–Lower Mississippian Bakken Formation, a world-class petroleum source rock in the Williston Basin of the United States and Canada, contain a diverse suite of mudstone lithofacies that were deposited in distinct facies belts. The succession consists of three discrete facies associations (FAs). These comprise: 1) siliceous mudstones; 2) quartz- and carbonate-bearing, laminated mudstones; and 3) macrofossil-debris-bearing massive mudstones. These FAs were deposited in three facies belts that reflect proximal to distal relationships in this mudstone system. The macrofossil-debris-bearing massive mudstones (FA 3) occur in the proximal facies belt and contain erosion surfaces, some with overlying conodont and phosphate–lithoclast lag deposits, mudstones with abundant millimeter-scale siltstone laminae showing irregular lateral thickness changes, and shell debris. In the medial facies belt, quartz- and carbonate-bearing, laminated mudstones dominate, exhibiting sub-millimeter-thick siltstone layers with variable lateral thicknesses and localized mudstone ripples. In the distal siliceous mudstone facies belt, radiolarites, radiolarian-bearing mudstones, and quartz- and carbonate-bearing, laminated mudstones dominate. Overall, total organic carbon (TOC) contents range between about 3 and 10 wt %, with a general proximal to distal decrease in TOC content. Abundant evidence of bioturbation exists in all FAs, and the lithological and TOC variations are paralleled by changes in burrowing style and trace-fossil abundance. While two horizontal traces and two types of fecal strings are recognized in the proximal facies belt, only a single horizontal trace fossil and one type of fecal string characterize mudstones in the distal facies belt. Radiolarites intercalated into the most distal mudstones are devoid of traces and fecal strings. Bedload transport processes, likely caused by storm-induced turbidity currents, were active across all facies belts. Suspended sediment settling from near the ocean surface, however, most likely played a role in the deposition of some of the mudstones, and was probably responsible for deposition of the radiolarites. The distribution pattern of high-TOC sediments in proximal and lower-TOC deposits in some distal facies is interpreted as a function of higher accumulation rates during radiolarian depositional events leading to a decrease in suspension-derived organic carbon in radiolarite laminae. The presence of burrows in all FAs and nearly all facies in the upper Bakken shale member indicates that dysoxic conditions prevailed during its deposition. This study shows that in intracratonic high-TOC mudstone successions such as the upper Bakken shale member bed-load processes most likely dominated sedimentation, and conditions promoted a thriving infaunal benthic community. As such, deposition of the upper Bakken shale member through dynamic processes in an overall dysoxic environment represents an alternative to conventional anoxic depositional models for world-class source rocks.

North Dakota↗
USGS1999

Fraser River watershed, Colorado — Assessment of available water-quantity and water-quality data through water year 1997

The water-quantity and water-quality data for the Fraser River watershed through water year 1997 were compiled for ground-water and surface-water sites. In order to assess the water-quality data, the data were related to land use/land cover in the watershed. Data from 81 water-quantity and water-quality sites, which consisted of 9 ground-water sites and 72 surface-water sites, were available for analysis. However, the data were limited and frequently contained only one or two water-quality analyses per site. The Fraser River flows about 28 miles from its headwaters at the Continental Divide to the confluence with the Colorado River. Ground-water resources in the watershed are used for residential and municipal drinking-water supplies. Surface water is available for use, but water diversions in the upper parts of the watershed reduce the flow in the river. Land use/land cover in the watershed is predominantly forested land, but increasing urban development has the potential to affect the quantity and quality of the water resources. Analysis of the limited ground-water data in the watershed indicates that changes in the land use/land cover affect the shallow ground-water quality. Water-quality data from eight shallow monitoring wells in the alluvial aquifer show that iron and manganese concentrations exceeded the U.S. Environmental Protection Agency secondary maximum contaminant level. Radon concentrations from these monitoring wells exceeded the U.S. Environmental Protection Agency proposed maximum contaminant level. The proposed radon contaminant level is currently being revised. The presence of volatile organic compounds at two monitoring wells in the watershed indicates that land use affects the shallow ground water. In addition, bacteria detected in three samples are at concentrations that would be a concern for public health if the water was to be used as a drinking supply. Methylene blue active substances were detected in the ground water at some sites and are a possible indication of contamination from wastewater. Age of the alluvial ground water ranged from 10 to 30 years; therefore, results of land-management practices to improve water quality may not be apparent for many years. Surface-water-quality data for the Fraser River watershed are sparse. The surface-water-quality data show that elevated concentrations of selected constituents generally are related to specific land uses in the watershed. For one sample (about 2 percent; 1 of 53), dissolved manganese concentration exceeded the U.S. Environmental Protection Agency secondary maximum contaminant level. Two samples from two surface-water sites in the watershed exceeded the un-ionized ammonia chronic criterion. Spatial distribution of nutrient species (ammonia, nitrite, nitrate, and total phosphorus) shows that elevated concentrations occur primarily downstream from urban areas. Sites with five or more years of record were analyzed for temporal trends in concentration of nutrient species. Downward trends were identified for ammonia and nitrite for three surface-water sites. For nitrate, no trends were observed at two sites and a downward trend was observed at one site. Total phosphorus showed no trend for the site near the mouth of the Fraser River. Downward trends in the nutrient species may reflect changes in the wastewater-treatment facilities in the watershed. Bacteria sampling completed in the watershed indicates that more bacteria are present in the water near urban settings. The limited ground-water and surface-water data for the Fraser River watershed provide a general assessment of the quantity and quality of these resources. Concentrations of most water-quality constituents generally are less than ground- and surface-water-quality standards, but the presence of bacteria, some volatile organic compounds, methylene blue active substances, and increased nutrients in the water may indicate that land use is affecting the water quality.

Colorado↗
USGS2020

Wildfire reveals transient changes to individual traits and population responses of a native bumble bee ( Bombus vosnesenskii )

1. Fire-induced changes in the abundance and distribution of organisms, especially plants, can alter resource landscapes for mobile consumers driving bottom-up effects on their population sizes, morphologies, and reproductive potential. We expect these impacts to be most striking for obligate visitors of plants, like bees and other pollinators, but these impacts can be difficult to interpret due to the limited information provided by forager counts in the absence of survival or fitness proxies. 2. Increased bumble bee worker abundance is often coincident with the pulses of flowers that follow recent fire. However, it is unknown if observed postfire activity is due to underlying population growth or a stable pool of colonies recruiting more foragers to abundant resource patches. This distinction is necessary for determining the net impact of disturbance on bumble bees: are there population-wide responses or do just a few colonies reap the rewards? 3. We estimated colony abundance before and after fire in burned and unburned areas using a genetic mark-recapture framework. We paired colony abundance estimates with measures of body size, counts of queens, and estimates of foraging and dispersal to assess changes in worker size, reproductive output, and landscape-scale movements. 4. Higher floral abundance following fire not only increased forager abundance, but also the number of colonies from which those foragers came. Importantly, despite a larger population size we also observed increased mean worker size. Two years following fire, queen abundance was higher in both burned and unburned sites, potentially due to the dispersal of queens from burned into unburned areas. The effects of fire were transient; within two growing seasons, worker abundance was substantially reduced across the entire sampling area and body sizes were similar between burned and unburned sites. 5. Our results reveal how disturbance can temporarily release populations from resource limitation, boosting the genetic diversity, body size, and reproductive output of populations. Given that the effects of fire on bumble bees acted indirectly through pulsed resource availability, it is likely our results are generalizable to other situations, such as habitat restorations, where resource density is enhanced within the landscape.

California↗
USGS2020

Mapping croplands of Europe, Middle East, Russia, and Central Asia using Landsat 30-m data, machine learning algorithms and Google Earth Engine

Accurate and timely information on croplands is important for environmental, food security, and policy studies. Spatially explicit cropland datasets are also required to derive information on crop type, crop yield, cropping intensity, as well as irrigated areas. Large area defined as continental to global cropland mapping is challenging due to differential manifestation of croplands, wide range of cultivation practices and limited reference data availability. This study presents the results of a cropland extent mapping of 64 Countriescovering large parts of Europe, Middle East, Russia and Central Asia. To cover such a vast area, roughly 160,000 Landsat scenes from 3,351 footprints between 2014 and 2016 were processed within the Google Earth Engine (GEE) cloud-platform. We used the pixel-based supervised Random Forest (RF) machine learning algorithm with a set of satellite data inputs capturing diverse spectral, temporal and topographical characteristics across twelve agroecological zones (AEZs). The reference data to train the classification model were collected from very high spatial resolution imagery (VHRI) and ancillary datasets. The result is a binary map showing cultivated/non-cultivated areas ca. 2015. The map produced an overall accuracy of 94 percent with roughly 14 percent omission and commission errors for the cropland class based on a large set of independent validation samples. The map suggests the entire study area has a total 546 million hectares (Mha) of croplands occupying 18 percent of the land area. Comparison between national cropland area estimates from United Nations Food and Agricultural Organizations (FAO) and those derived from this work also showed an R-square value of 0.95. For the entire Landsat-derived 30-m product the overall accuracy was 93.8% with cropland class providing producers accuracy of 86.5% (errors of omissions = 13.5%) and users accuracy of 85.7% (errors of commissions = 14.3%). This Landsat-derived 30-m cropland product (GFSAD30) provided 10-30% greater cropland areas compared to UN FAO in the 64 Countries. Finally, the map-to-map comparison between GFSAD30 with several other cropland products revealed that the best similarity matrix was with the 30m global land cover (GLC30) product providing an overall accuracy of 88.8 percent (Kappa 0.7) with producers cropland similarity of 89.2 percent (errors of omissions = 10.8%) and users cropland similarity of 81.8 percent (errors of commissions = 8.1%). GFSAD30 captured the missing croplands in GLC30 product around significantly irrigated agricultural areas in Germany and Belgium and rainfed agriculture in Italy. This study also established that the real strength of GFSAD30 product, compared to other products, were in: 1. Identifying precise location of croplands, and 2. Capturing fragmented croplands. The cropland extent map dataset is available through NASAs Land Processes Distributed Active Archive Center (LP DAAC) at https://doi.org/10.5067/MEaSUREs/GFSAD/GFSAD30EUCEARUMECE.001, while the training and reference data as well as visualization are available at the Global Croplands website.

ISPRS Journal of Photogrammetry and Remote Sensing↗
USGS2024

The potential for species distribution models to distinguish source populations from sinks

1. While species distribution models (SDM) are frequently used to predict species occurrences to help inform conservation management, there is limited evidence evaluating whether habitat suitability can reliably predict intrinsic growth rates or distinguish source from sink populations. Filling this knowledge gap is critical for conservation science, as applications of SDMs for management purposes ultimately depend on these typically unobserved population or metapopulation dynamics. 2. Using regression, we associate previously published population level estimates of intrinsic growth and abundance derived from a Bayesian analysis of mark-recapture data for 17 bird species found in the contiguous United States with SDM habitat suitability estimates fitted here to opportunistic data for these same species. We then use AUC to measure how well SDMs can distinguish populations categorized as sources and sinks, depending on their intrinsic growth rates estimated from the mark-recapture data. We built SDMs using two different approaches, boosted regression trees (BRT) and Generalized Linear Models (GLM), and compared their predictive performance. Each SDM was built with presence points obtained from eBird and 10 environmental variables previously selected to model intrinsic growth rates and abundance for these species. 3. We show that SDMs built with opportunistic data are poor predictors of species demography in general; both BRT and GLM explained very little spatial variation of intrinsic growth rate and population abundance (median R2 across 17 species was close to 0.1 for both SDM methods). SDMs do, however, estimate higher suitability for source populations as compared to sinks. Out of 13 species which had both source and sink populations, both BRT and GLM had AUC values greater than 0.7 for 7 species when discriminating between sources and sinks. 4. Habitat suitability have the potential to be a useful measure to indicate a population’s ability to sustain itself as a source population, however more research on a diverse set of taxa is essential to fully explore this potential. This interpretation of habitat suitability can be particularly useful for conservation practice, and identification of explicit cases of when and how SDMs fail to match population demography can be informative for advancing ecological theory.

Journal of Animal Ecology↗
USGS2025

Soil moisture partitioning between under canopy and interspace environments in shrublands of the northern Chihuahuan Desert

Soil moisture is a key link between hydrologic and ecologic processes in desert shrublands. Understanding how soil moisture is spatially distributed in desert shrublands provides valuable insights into how shrubs use and impact limiting water resources, and how shrublands may respond to future meteorological and climate change. Our goals were to determine how soil moisture is partitioned between soil volumes under canopies and in the bare soil interspaces across multiple desert shrublands, and to evaluate the roles of physical soil properties, shrub-type characteristics, meteorology, and measurement resolution in influencing and observing variation in soil moisture partitioning. Utilizing two long-term soil moisture datasets (monthly resolution, 30 years, whole soil profile measurements; and 30 min resolution, 10 years, 10–30 cm measurements), we compared soil moisture partitioning across nine northern Chihuahuan Desert shrubland sites (three sites dominated by creosotebush [ Larrea tridentata ], three by honey mesquite [ Prosopis glandulosa ], and three by tarbush [ Flourensia cernua ]) in the Jornada Basin, southern New Mexico, USA. Over 30 years, monthly, whole profile data showed that soil moisture in mesquite shrublands was consistently higher in bare soil interspaces compared to under canopies, whereas soil moisture under and between shrubs was more similar in creosotebush and tarbush shrublands. Physical soil properties were linked as explanatory variables of long-term soil moisture partitioning (monthly whole profile dataset), whereas 30-minute data showed that shorter-term periods of higher precipitation promoted greater near surface soil moisture (10–30 cm) in bare soil interspaces that was not captured at monthly time steps. Thus, although the long-term average partitioning of soil moisture in these shrublands is strongly controlled by soil physical properties, soil moisture partitioning varies at shorter timescales (daily to weekly) in response to precipitation events. Moreover, shrub-type characteristics influenced soil moisture partitioning, with dense and tall mesquite shrubs having lower under canopy soil moisture than tarbush, and root architecture potentially influencing partitioning across creosotebush sites. These results illustrate diversity in soil moisture partitioning both between and within shrublands of the northern Chihuahuan Desert, and elucidate how physical soil properties, shrub-type characteristics, and meteorological variation interact to shape their soil moisture dynamics.

New Mexico↗
USGS2017

Critical mineral resources of the United States—Economic and environmental geology and prospects for future supply

Summary Mineral commodities are vital for economic growth, improving the quality of life, providing for national defense, and the overall functioning of modern society. Minerals are being used in larger quantities than ever before and in an increasingly diverse range of applications. With the increasing demand for a considerably more diverse suite of mineral commodities has come renewed recognition that competition and conflict over mineral resources can pose significant risks to the manufacturing industries that depend on them. In addition, production of many mineral commodities has become concentrated in relatively few countries (for example, tungsten, rare-earth elements, and antimony in China; niobium in Brazil; and platinum-group elements in South Africa and Russia), thus increasing the risk for supply disruption owing to political, social, or other factors. At the same time, an increasing awareness of and sensitivity to potential environmental and health issues caused by the mining and processing of many mineral commodities may place additional restrictions on mineral supplies. These factors have led a number of Governments, including the Government of the United States, to attempt to identify those mineral commodities that are viewed as most “critical” to the national economy and (or) security if supplies should be curtailed. This book presents resource and geologic information on the following 23 mineral commodities currently among those viewed as important to the national economy and national security of the United States: antimony (Sb), barite (barium, Ba), beryllium (Be), cobalt (Co), fluorite or fluorspar (fluorine, F), gallium (Ga), germanium (Ge), graphite (carbon, C), hafnium (Hf), indium (In), lithium (Li), manganese (Mn), niobium (Nb), platinum-group elements (PGE), rare-earth elements (REE), rhenium (Re), selenium (Se), tantalum (Ta), tellurium (Te), tin (Sn), titanium (Ti), vanadium (V), and zirconium (Zr). For a number of these commodities—for example, graphite, manganese, niobium, and tantalum—the United States is currently wholly dependent on imports to meet its needs. The first two chapters (A and B) deal with general information pertinent to the study of mineral resources. Chapters C through V describe individual mineral commodities and include an overview of current uses of the commodity, identified resources and their distribution nationally and globally, the state of current geologic knowledge, the potential for finding additional deposits nationally and globally, and geoenvironmental issues that may be related to the production and uses of the commodity. These chapters are updates of the commodity chapters published in 1973 in U.S. Geological Survey Professional Paper 820, “United States Mineral Resources.”

Professional Paper↗
USGS2014

Simulation of the Lower Walker River Basin hydrologic system, west-central Nevada, using PRMS and MODFLOW models

Walker Lake is a terminal lake in west-central Nevada with almost all outflow occurring through evaporation. Diversions from Walker River since the early 1900s have contributed to a substantial reduction in flow entering Walker Lake. As a result, the lake is receding, and salt concentrations have increased to a level in which Oncorhynchus clarkii henshawi (Lahontan Cutthroat trout) are no longer present, and the lake ecosystem is threatened. Consequently, there is a concerted effort to restore the Walker Lake ecosystem and fishery to a level that is more sustainable. However, Walker Lake is interlinked with the lower Walker River and adjacent groundwater system which makes it difficult to understand the full effect of upstream water-management actions on the overall hydrologic system including the lake level, volume, and dissolved-solids concentrations of Walker Lake. To understand the effects of water-management actions on the lower Walker River Basin hydrologic system, a watershed model and groundwater flow model have been developed by the U.S. Geological Survey in cooperation with the Bureau of Reclamation and the National Fish and Wildlife Foundation. The watershed model was developed using the precipitation runoff modeling system (PRMS) and the groundwater flow model was constructed using the MODular groundwater FLOW model (MODFLOW) and both were calibrated for the lower Walker River Basin. These models can be incorporated in an integrated Groundwater and Surface-water FLOW (GSFLOW) model of the lower Walker River Basin. Additionally, the MODFLOW model developed for this study is useful for efficiently simulating long-term and large-scale effects of water-management actions on groundwater hydrology, streamflow, and Walker Lake level, volume, and dissolved-solids concentrations. The lower Walker River Basin PRMS model (LWR_PRMS) was constructed using a subbasin approach to aid in development and calibration, and simulates a 30-year period from 1978 to 2007 using daily time steps. The LWR_PRMS was used to estimate the distribution of groundwater recharge specified in the MODFLOW model. The highest rates of groundwater recharge occur in the Wassuk Range beneath perennial and ephemeral stream channels, whereas lower rates of recharge occur beneath alluvial fans along mountain fronts. The total groundwater recharge estimated using PRMS was about 25,000 acre-feet per year. The lower Walker River Basin MODFLOW (LWR_MF) model simulates an 89-year period using monthly time steps. The LWR_MF was constructed with an initial steady-state simulation to represent dynamic equilibrium conditions from 1908 to 1918 and then a transient simulation representing the period 1919–2007. The model was calibrated using a combination of manual and automated methods of adjusting model parameters to minimize errors between model simulated results and weighted observations of groundwater levels, streamflows, and lake level. Hydrologic conditions simulated with the LWR_MF include the movement and change in storage of groundwater, and the water budgets for Walker River, Walker Lake, and the groundwater system. The LWR_MF computed dissolved-solids concentrations for Walker Lake using simulated lake volume and an assumed constant internal salt mass of 37.2 million tons. Effects of potential changes in water management on future conditions (scenarios) of the lower Walker River Basin hydrologic system and Walker Lake from 2011 to 2070 were evaluated. Several water-management scenarios were considered, including a baseline scenario that represents no changes in system management, improved irrigation efficiencies for the Walker River Indian Irrigation Project (WRIIP), a range of increased streamflows entering the lower Walker River Basin, and, the fallowing of fields on the WRIIP. For the baseline scenario, it was assumed that streamflow conditions from 1981 to 2010 will be repeated in the future. Results indicate that Walker Lake level and volume continue to decline but at a slower rate as the surface area of the lake becomes smaller and lake evaporation decreases. Dissolved-solids concentrations in Walker Lake continue to increase and increase much more rapidly during periods when minimal flows reach the lake due to a diminished lake volume. Alternatively, in years with high runoff, lake level increases are greater and dissolved-solids decreases are greater, compared with equivalent runoffs experienced during 1981–2010. The simulated effects of improving WRIIP efficiencies on Walker River streamflows, Walker Lake inflow, level, and dissolved-solids concentrations, and crop consumptive use, are compared with the baseline reference scenario for a range of irrigation efficiency improvements from 0 to 25 percent over 60 years. Results indicate that water is conserved through a reduction in irrigation-induced groundwater recharge and subsequent groundwater discharge through evapotranspiration. The conserved water mostly goes to increased streamflow to Walker Lake, followed by increased crop consumptive use, then increased evaporation from Weber Reservoir. The simulated effects of increased streamflows at Walker River at Wabuska streamgage (10301500) on Walker Lake inflow, level, and dissolved-solids concentrations, and crop consumptive use, are compared with the baseline scenario after 60 years under two different management methods for Weber Reservoir. Results indicate Walker Lake level and dissolved-solids concentrations stabilized with increased irrigation-season streamflow of about 40,000 acre-feet per year at the Walker River at Wabuska streamgage. Walker Lake level increased, and dissolved-solids concentration decreased, with increased flows of 50,000 acre-feet per year or more. After 60 years with additional irrigation-season streamflows of 50,000 acre-feet per year, Walker Lake level increased by about 48 feet, and lake dissolved-solids concentrations decreased by about 3,000 milligrams per liter (mg/L). With 75,000 acre-feet per year of additional streamflow, Walker Lake level increased by 70 feet, and dissolved-solids concentration decreased by 7,600 milligrams per liter. The effects of fallowing of Walker River Indian Irrigation Project fields from 2007 to 2010 on Walker Lake inflow, level, and dissolved solids were evaluated. Fallowing resulted in a near doubling of Walker River inflow to Walker Lake during this period, an increase in Walker Lake level of about 1.4 feet, and a decrease in dissolved-solids concentration of about 540 mg/L.

Nevada↗
USGS1989

Oligocene caldera complex and calc-alkaline tuffs and lavas of the Indian Peak volcanic field, Nevada and Utah

The Indian Peak volcanic field is representative of the more than 50,000 km 3 of ash-flow tuff and tens of calderas in the Great Basin that formed during the Oligocene-early Miocene "ignimbrite flareup" in southwestern North America. The field formed about 32 to 27 Ma in the southeastern Great Basin and consists of the centrally positioned Indian Peak caldera complex and a surrounding blanket of related ash-flow sheets distributed over an area of about 55,000 km 2 . The field has a volume on the order of 10,000 km 3 . A cluster of two obscure source areas and four calderas comprise the ∼80 x 120 km caldera complex. Only minor volumes of rhyolite and two pyroxene andesite lavas were extruded episodically throughout the lifetime of the magma system that formed the field, chiefly during its youth and old age. Six ash-flow sequences alternate between rhyolite and dacite in a volume ratio of about 1:8, and a culminating seventh is trachytic. The first, fourth, and sixth tuff units are of rhyolite that contains sparse to modest amounts of phenocrysts, chiefly plagioclase and biotite, and abundant lithic and pumice lapilli; these deposits are confined within the caldera complex and form multiple and compound cooling units that are normally zoned with respect to bulk chemical composition and crystal type, content, and size. The second, third, and fifth tuff sequences are of crystal-rich dacite that forms extensive simple cooling-unit outflow sheets and partial caldera fillings of compound cooling units. Each dacite unit contains similar amounts of plagioclase, biotite, hornblende, quartz, two pyroxenes, and Fe-Ti oxides; trace amounts of sanidine and titanite also occur in the youngest. Cognate inclusions in the dacites show only slight intra- and inter-unit differences in bulk chemical composition. The seventh eruptive sequence consists of several cooling units of trachydacite tuff containing small to modest amounts of plagioclase and two pyroxenes. These dominantly high-K calc-alkaline rocks are a record of the birth, maturation, and death of a large, open, continental magma system that was probably initiated and sustained by influx of mafic magma derived from a southward-migrating locus of magma production in the mantle. The small volumes of chemically diverse andesitic rocks were derived from separately evolving magma bodies but are modified representatives of the mantle power supply. Recurrent production of very large batches (some greater than 3,000 km 3 ) of quite uniform dacite magmas appears to have required combination of andesite magma and crustal silicic material in vigorously convecting chambers. Compositional data indicate that rhyolites are polygenetic. As the main locus of mantle magma production shifted southward, trachydacite magma could have been produced by fractionation of andesitic magma within the crust.

Nevada, Utah↗
USGS2014

Methods for estimating annual exceedance-probability discharges and largest recorded floods for unregulated streams in rural Missouri

Regression analysis techniques were used to develop a set of equations for rural ungaged stream sites for estimating discharges with 50-, 20-, 10-, 4-, 2-, 1-, 0.5-, and 0.2-percent annual exceedance probabilities, which are equivalent to annual flood-frequency recurrence intervals of 2, 5, 10, 25, 50, 100, 200, and 500 years, respectively. Basin and climatic characteristics were computed using geographic information software and digital geospatial data. A total of 35 characteristics were computed for use in preliminary statewide and regional regression analyses. Annual exceedance-probability discharge estimates were computed for 278 streamgages by using the expected moments algorithm to fit a log-Pearson Type III distribution to the logarithms of annual peak discharges for each streamgage using annual peak-discharge data from water year 1844 to 2012. Low-outlier and historic information were incorporated into the annual exceedance-probability analyses, and a generalized multiple Grubbs-Beck test was used to detect potentially influential low floods. Annual peak flows less than a minimum recordable discharge at a streamgage were incorporated into the at-site station analyses. An updated regional skew coefficient was determined for the State of Missouri using Bayesian weighted least-squares/generalized least squares regression analyses. At-site skew estimates for 108 long-term streamgages with 30 or more years of record and the 35 basin characteristics defined for this study were used to estimate the regional variability in skew. However, a constant generalized-skew value of -0.30 and a mean square error of 0.14 were determined in this study. Previous flood studies indicated that the distinct physical features of the three physiographic provinces have a pronounced effect on the magnitude of flood peaks. Trends in the magnitudes of the residuals from preliminary statewide regression analyses from previous studies confirmed that regional analyses in this study were similar and related to three primary physiographic provinces. The final regional regression analyses resulted in three sets of equations. For Regions 1 and 2, the basin characteristics of drainage area and basin shape factor were statistically significant. For Region 3, because of the small amount of data from streamgages, only drainage area was statistically significant. Average standard errors of prediction ranged from 28.7 to 38.4 percent for flood region 1, 24.1 to 43.5 percent for flood region 2, and 25.8 to 30.5 percent for region 3. The regional regression equations are only applicable to stream sites in Missouri with flows not significantly affected by regulation, channelization, backwater, diversion, or urbanization. Basins with about 5 percent or less impervious area were considered to be rural. Applicability of the equations are limited to the basin characteristic values that range from 0.11 to 8,212.38 square miles (mi 2 ) and basin shape from 2.25 to 26.59 for Region 1, 0.17 to 4,008.92 mi 2 and basin shape 2.04 to 26.89 for Region 2, and 2.12 to 2,177.58 mi 2 for Region 3. Annual peak data from streamgages were used to qualitatively assess the largest floods recorded at streamgages in Missouri since the 1915 water year. Based on existing streamgage data, the 1983 flood event was the largest flood event on record since 1915. The next five largest flood events, in descending order, took place in 1993, 1973, 2008, 1994 and 1915. Since 1915, five of six of the largest floods on record occurred from 1973 to 2012.

Missouri↗
USGS1948

Discharge and sediment loads in the Boise River drainage basin, Idaho 1939-40

The Boise River project is a highly developed agricultural area comprising some 520 square miles of valley and bench lands in southwestern Idaho. Water for irrigation is obtained from the Boise River and its tributaries which are regulated by storage in Arrow Rock and Deer Flat reservoirs. Distribution of water to the farms is effected by 27 principal canals and several small farm laterals which divert directly from the river. The- New York Canal, which is the largest, not only supplies water to smaller canals and farm laterals, but also is used to fill Deer Flat Reservoir near Nampa from which water is furnished to farms in the lower valley. During the past 15 years maintenance costs in a number of those canals have increased due to deposition of sediment in them and in the river channel itself below the mouth of Moore Creek. Interest in determining the runoff and sediment loads from certain areas in the Boise River drainage basin led to an investigation by the Flood Control Coordinating Committee of the Department of Agriculture. Measurements of daily discharge and sediments loads were made by the Geological Survey at 13 stations in the drainage basin during the 18-month period ended June 30, 1940. The stations were on streams in areas having different kinds of vegetative cover and subjected to different kinds of land-use practice. Data obtained during the investigation furnish a basis for certain comparisons of runoff and sediment loads from several areas arid for several periods of time. Runoff measured at stations on the. Boise River near Twin Springs and on Moore Creek near Arrow Rock was smaller during 1939 than during 1940 and was below the average annual runoff for the period of available record. Runoff measured at the other stations on the project also was smaller during 1939 than during 1940 and probably did not exceed the average for the previous 25 years. The sediment loads measured during the spring runoff in 1939 were smaller at most stations than those measured during the spring runoff in 1940. At those stations where the flow was not affected, or only slightly affected, by upstream diversions or by placer-mining operations, the largest sadiment loads per unit of drainage area were measured in Grouse Creek during both 1939 and 1940, amounting to 3,460 and 2,490 tons per square mile, respectively, and the smallest loads per unit of drainage area were measured in Bannock Creek during 1939 and in the Boise River near Twin Springs during 1940, amounting to 14 and 83 tons per square mile, respectively. Size anaylses of a large number of samples of suspended and deposited sediments give an indication of the origin of sediments carried past some of the stations. The analyses show that most of the sediment measured at the five stations in the Moore Creek drainages basin above Idaho City consisted largely of coarse material. They show, also, that the sediment measured at the station on Moore Creek above Thorn Creek consisted almost entirely of fine material during practically the entire period of the investigation. Most of the coarse material passing the stations above Idaho City probably was retained behind the dikes or in the pools usually formed by tailings from dredging operations in the placer-mining area below Idaho City, and much of the fine material measured at the station on Moore Creek above Thorn Creek probably was contributed by placer-mining activity. During the years when the spring runoff is greater than that measured during 1939 and 1940, it is probable that the dikes and pools will be less effective in retaining coarse sediments within the placered area. Records of sediment loads measured in the New York Canal indicate that a negligible amount of sediment was deposited there during 1939, but that in 1940 from 10 to 15 percent of the total load at the gaging station consisted of coarse sediment which was later deposited on the canal bottom. Most of the fine material was doubtless carried through the canal and eventually deposited in diversion ditches and on farm land. Because the sediment carried past the station on Moore Creek above Thorn Creek consisted almost entirely of fine material, it is probable, that a considerable part of the coarse sediment carried in the New York Canal during the 1940 spring runoff period was scoured from the large bed of deposited material in the Boise River above Diversion- Dam, and that the remainder came from Grimes Creek. Arrow Rock Reservoir was not sluiced during the investigation, and it is therefore unlikely that any of the coarse sediment in the New York Canal came from the Boise River above Moore Creek during 1939 and 1940. The average dry weight of 71 samples of deposited sediments collected from several parts of the Boise River drainage basin is about 90 pounds per cubic foot. The average specific gravity of 77 samples of deposited sediments is 2.57.

Idaho↗
USGS2002

Hydrology, vegetation, and soils of riverine and tidal floodplain forests of the lower Suwannee River, Florida, and potential impacts of flow reductions

A study relating hydrologic conditions, soils, and vegetation of floodplain forests to river flow was conducted in the lower Suwannee River, Florida, from 1996 to 2000. The study was done by the U.S. Geological Survey in cooperation with the Suwannee River Water Management District to help determine the minimum flows and levels required for wetlands protection. The study area included forests within the 10-year floodplain of the Suwannee River from its confluence with the Santa Fe River to the tree line (lower limit of forests) near the Gulf of Mexico, and covered 18,600 hectares (ha) of forests, 75 percent of which were wetlands and 25 percent uplands. The floodplain was divided into three reaches, riverine, upper tidal, and lower tidal, based on changes in hydrology, vegetation, and soils with proximity to the coast. The Suwannee River is the second largest river in Florida in terms of average discharge. Median flow at the confluence of the Suwannee and Santa Fe Rivers is approximately 181 cubic meters per second (m3/s) or 6,480 cubic feet per second (ft3/s) (1933-99). At the upper end of the riverine reach, river stages are unaffected by tides and have a typical annual range of 4.1 meters (m). Tides affect river stages at low and medium flows in the upper tidal reach, and at all flows in the lower tidal reach. Median tidal range at the mouth of the Suwannee River is about 1 m. Salinity of river water in the lower tidal reach increases with decreasing flow and proximity to the Gulf of Mexico. Vertically averaged salinity in the river near the tree line is typically about 5 parts per thousand at medium flow. Land-surface elevation and topographic relief in the floodplain decrease with proximity to the coast. Elevations range from 4.1 to 7.3 m above sea level at the most upstream riverine transect and from 0.3 to 1.3 m above sea level on lower tidal transects. Surface soils in the riverine reach are predominantly mineral and dry soon after floods recede except in swamps. Surface soils in upper and lower tidal reaches are predominantly organic, saturated mucks. In the downstream part of the lower tidal reach, conductivities of surface soils are high enough (greater than 4 milli-mhos per centimeter) to exclude many tree species that are intolerant of salinity. Species richness of canopy and subcanopy plants in wetland forests in the lower Suwannee River is high compared to other river floodplains in North America. A total of 77 tree, shrub, and woody vine species were identified in the canopy and subcanopy of floodplain wetland forests (n = 8,376). Fourteen specific forest types were mapped using digitized aerial photographs, defined from vegetative sampling, and described in terms of plant species composition. For discussion purposes, some specific wetland types were combined, resulting in three general wetland forest types for each reach. Riverine high bottomland hardwoods have higher canopy species richness than all other forest types (40-42 species), with Quercus virginiana the most important canopy tree by basal area. The canopy composition of riverine low bottomland hardwoods is dominated by five species with Quercus laurifolia the most important by basal area. Riverine swamps occur in the lowest and wettest areas with Taxodium distichum the most important canopy species by basal area. Upper tidal bottomland hardwoods are differentiated from riverine forests by the presence of Sabal palmetto in the canopy. Upper tidal mixed forests and swamps are differentiated from riverine forests, in part, by the presence of Fraxinus profunda in the canopy. Nyssa aquatica, the most important canopy species by basal area in upper tidal swamps, is absent from most forests in the lower tidal reach where its distribution is probably restricted by salinity. Hydric hammocks, a wetland type that is rare outside of Florida, are found in the lower tidal reach and are flooded every 1-2 years by either storm surge or river floods. Lower tidal mixed forests and swamps have continuously saturated muck soils and are differentiated from upper tidal forests, in part, by the presence of Magnolia virginiana in the canopy. Lower tidal swamps have the highest density of canopy trees (about 1,200 trees per hectare) of all floodplain forest types, with Nyssa biflora the most important canopy species by basal area. Water use in the Suwannee River basin in Florida and Georgia is expected to increase over time because of anticipated growth and development in the region and adjacent areas. If increased water consumption reduced river flow, river stage would decrease and salinity would increase, resulting in a variety of impacts on forest composition, wetland biogeochemical processes, and fish and wildlife habitat. Forest composition in the floodplain is primarily determined by duration of inundation and saturation, depth and frequency of floods, and salinity. Long-term flow reductions would result in shallower flood depths, allowing drier and more tidal species to invade wetland forests of the riverine and upper tidal reaches. If flows were reduced 2.8-56 m3/s (100-2,000 ft3/s), an estimated 52-1,140 ha, respectively, would change to a drier forest type, and 36-788 ha, respectively, would change to a more tidal forest type. The greatest impacts would occur in swamps, where important swamp species such as Taxodium distichum and Nyssa aquatica could have increased competition not only from drier or more tidal species, but also from opportunistic bottomland hardwoods or invasive exotic species. Reduced flows could also result in a conversion of some wetland forests to uplands, increasing vulnerability to human disturbance, and decreasing tree basal area, species richness, and diversity of wildlife habitat. Salt-intolerant species would move upstream if flow reductions increased salinity in the lower tidal reach. If flows were reduced 2.8-56 m3/s (100-2,000 ft3/s), the area of forests along the tree line that would convert to marshes is estimated to be 72-618 ha, respectively. Loss of forests at the tree line would result in a loss of complex vertical structural diversity and woody micro-habitats that are used by many animals. These changes are already occurring due to sea level rise, but changes would occur more quickly if salinities increased as a result of flow reductions. The amount of inundated and saturated area in the floodplain forest of the riverine reach would decrease if flows were reduced. The greatest impacts would result from flow reductions that occurred at low flows, when inundated and saturated areas in the floodplain are limited. Drier conditions would result in oxidation of organic matter in swamp soils, which would reduce the soil's water-holding capacity and ability to retain water during droughts. Drier soils would increase vulnerability of the floodplain to fire and could also reduce the ability of riverine forests to remove nitrates and other pollutants from river water. Loss of inundated areas resulting from flow reductions at low flow would eliminate aquatic habitats that are critical to the survival of floodplain fishes and aquatic invertebrates, and are important to many other animals that use the floodplain. If flow reductions occurred during high flows, main channel fishes could decrease in diversity and abundance because they are seasonally dependent on flooded forests for food, shelter, and reproduction. In addition, aquatic organisms in the river and estuary could be adversely affected because they depend on particulate organic detritus and other floodplain exports as food sources.

Florida↗
USGS2012

Titan's fluvial valleys: Morphology, distribution, and spectral properties

Titan's fluvial channels have been investigated based on data obtained by the Synthetic Aperture Radar (SAR) instrument and the Visible and Infrared Mapping Spectrometer (VIMS) onboard the Cassini spacecraft. In this paper, a database of fluvial features is created based on radar-SAR data aiming to unveil the distribution and the morphologic and spectral characteristics of valleys on Titan on a global scale. It will also study the spatial relations between fluvial valleys and Titan's geologic units and spectral surface units which have become accessible thanks to Cassini-VIMS data. Several distinct morphologic types of fluvial valleys can be discerned by SAR-images. Dendritic valley networks appear to have much in common with terrestrial dendritic systems owing to a hierarchical and tree-shaped arrangement of the tributaries which is indicative of an origin from precipitation. Dry valleys constitute another class of valleys resembling terrestrial wadis, an indication of episodic and strong flow events. Other valley types, such as putative canyons, cannot be correlated with rainfall based on their morphology alone, since it cannot be ruled out that they may have originated from volcanic/tectonic action or groundwater sapping. Highly developed and complex fluvial networks with channel lengths of up to 1200 km and widths of up to 10 km are concentrated only at a few locations whereas single valleys are scattered over all latitudes. Fluvial valleys are frequently found in mountainous areas. Some terrains, such as equatorial dune fields and undifferentiated plains at mid-latitudes, are almost entirely free of valleys. Spectrally, fluvial terrains are often characterized by a high reflectance in each of Titan's atmospheric windows, as most of them are located on Titan's bright ‘continents’. Nevertheless, valleys are spatially associated with a surface unit appearing blue due to its higher reflection at 1.3 μ m "> 1.3μm in a VIMS false color RGB composite with R: 1.59 / 1.27 μ m "> 1.59/1.27μm , G: 2.03 / 1.27 μ m "> 2.03/1.27μm , and B: 1.27 / 1.08 μ m "> 1.27/1.08μm ; the channels either dissect pure bluish surface units or they are carved into terrain with a mixed spectral signature between bright and bluish surface materials. The global picture of fluvial flows clearly indicates a high diversity of parameters controlling fluvial erosion, such as climatic processes, as well as surface and bedrock types. Recent fluvial activity is very likely in the north polar region in contrast to more arid conditions at lower latitudes and at the south pole of Titan. This divergence is probably an indication of seasonal climatic asymmetries between the hemispheres. However, traces of previous fluvial activity are scattered over all latitudes of Titan, which is indicative of previous climatic conditions with at least episodic rainfall.

Planetary and Space Science↗
USGS2024

Evaluating mountain lion diet before and after a removal of feral horses in a semiarid environment

Non-native species can affect ecosystems by influencing native predator-prey dynamics. Therefore, management interventions designed to remove non-natives may inadvertently lead to increased predation on native species. Feral horses are widely distributed throughout the arid parts of western North America. A growing body of research indicates that horses can be an important prey species to mountain lions in ecosystems where they overlap. In December 2020, the Bureau of Land Management removed 455 horses from the Delamar Mountains, Nevada, USA. We leveraged this management intervention to implement a before–after–control–impact study to test hypotheses about predation on horses and native ungulates. We predicted (1) that horses would comprise an important part of the diet in this mixed-prey community, (2) following removal, the proportion of horses in the diet would decrease and native ungulates would increase, and (3) mountain lion home ranges overlapping the treatment areas would increase in response to decreased prey availability. From 2018 to 2022, we investigated 1360 clusters from 29 GPS-collared lions and identified 1056 prey items. To model the probability of a predation event (a kill), we fit a mixed-effects logistic regression model for ungulate prey as a function of lion sex, treatment area (in/out), and treatment period (pre-/post-removal). We used a log-linear regression model to evaluate changes in home range size. The most common prey were mule deer (55%), feral horses (32%), and coyotes (4%). Twenty-two of 29 lions consumed horses, although the rate of horse consumption was highly variable across individuals. Horses of both sexes and all age classes were predated. In contrast to predictions, our models detected no effect of removals on diet composition (β interaction = 0.30 ± 1.1), nor did the removal influence home range size (β interaction = 0.02 ± 0.02). Despite a 46% reduction in horse abundance, we found no evidence for prey-switching following the horse removal treatment. Removal magnitude, rapid horse immigration, and/or behavioral specialization of individual mountain lions may help explain these results. Our findings have important implications for mountain lion and feral horse management in arid environments characterized by high prey diversity, but low prey abundance.

Nevada↗
USGS2015

Discharge, suspended sediment, and salinity in the Gulf Intracoastal Waterway and adjacent surface waters in South-Central Louisiana, 1997–2008

Discharge, suspended sediment, and salinity data collected between 1997 and 2008 indicate that the Gulf Intracoastal Waterway (GIWW) is an important distributary of river water and suspended sediments to coastal wetlands in south-central coastal Louisiana. Following natural hydraulic gradients, the GIWW passively distributes freshwater and suspended sediments from the Atchafalaya River to areas at least 30 to 50 miles west and east, respectively, of Morgan City. The magnitude and reach of the discharge in the GIWW increase as stage of the Wax Lake Outlet at Calumet and Lower Atchafalaya River (LAR) at Morgan City increase. The magnitude and duration of discharge vary from year to year depending on the flow regime of the Atchafalaya River. Annual discharge of water in the GIWW was greater during years when stage of the LAR remained anomalously high throughout the year, compared with average and peak flood years. During years when Atchafalaya River flow is low, Bayou Boeuf, a waterway draining the Verret subbasin, becomes a major source of water maintaining the eastward flow in the GIWW. The GIWW is the only means of getting river water to some parts of coastal Louisiana. The length of time stage of the LAR at Morgan City exceeds a given height has increased from the 1940s to 2008. This shift has increased the length of time the GIWW functions as a predictable distributary of river water each year. Similar shifts in the future could be expected to increase the duration and amounts of river water reaching coastal Louisiana wetlands through the GIWW. Median suspended-sediment concentrations in the GIWW to the west of Morgan City were around 160 milligrams per liter (mg/L). In the GIWW east of Morgan City, median concentrations were 120–160 mg/L, except in Bayou Boeuf at Railroad Bridge in Amelia and the parts of the GIWW between Bayou Boeuf and the Houma Navigation Canal; median concentrations here were around 100 mg/L. River water penetrates much of the Louisiana coast, as demonstrated by the large year-to-year fluctuations in salinity regimes of intradistributary basins in response to differences in flow regimes of the Mississippi and the Atchafalaya Rivers. This occurs directly through inflow along the GIWW and through controlled diversions and indirectly by transport into basin interiors after mixing with the Gulf of Mexico. The GIWW plays an important role in moderating salinity in intradistributary basins; for example, salinity in surface waters just south of the GIWW between Bayou Boeuf and the Houma Navigation Canal remained low even during a year with prolonged low water (2000).

Louisiana↗
USGS2018

Review of the geochemistry and metallogeny of approximately 1.4 Ga granitoid intrusions of the conterminous United States

The conterminous United States hosts numerous volumetrically significant and geographically dispersed granitoid intrusions that range in age from 1.50 to 1.32 billion years before present (Ga). Although previously referred to as A-type granites, most are better described as ferroan granites. These granitoid intrusions are distributed in the northern and central Rocky Mountains, the Southwest, the northern midcontinent, and a swath largely buried beneath Phanerozoic cover across the Great Plains and into the southern midcontinent. These intrusions, with ages that are bimodally distributed between about 1.455–1.405 Ga and 1.405–1.320 Ga, are dispersed nonsystematically with respect to age across their spatial extents. Globally, although A-type or ferroan granites are genetically associated with rare-metal deposits, most U.S. 1.4 Ga granitoid intrusions do not contain significant deposits. Exceptions are the light rare-earth element deposit at Mountain Pass, California, and the iron oxide-apatite and iron oxide-copper-gold deposits in southeast Missouri. Most of the U.S. 1.4 Ga granitoid intrusions are composed of hornblende ± biotite or biotite ± muscovite monzogranite, commonly with prominent alkali feldspar megacrysts; however, modal compositions vary widely. These intrusions include six of the eight commonly identified subtypes of ferroan granite: alkali-calcic and calc-alkalic peraluminous subtypes; alkalic, alkali-calcic, and calc-alkalic metaluminous subtypes; and the alkalic peralkaline subtype. The U.S. 1.4 Ga granitoid intrusions also include variants of these subtypes that have weakly magnesian compositions. Extreme large-ion lithophile element enrichments typical of ferroan granites elsewhere are absent among these intrusions. Chondrite-normalized rare-earth element patterns for these intrusions have modest negative slopes and moderately developed negative europium anomalies. Their radiogenic isotopic compositions are consistent with mixing involving primitive, mantle-derived components and evolved, crust-derived components. Each compositional subtype can be ascribed to a relatively unique petrogenetic history. The numerically dominant ferroan, peraluminous granites probably represent low-degree, relatively high-pressure partial melting of preexisting, crust-derived, intermediate-composition granitoids. The moderately numerous, weakly magnesian, peraluminous granites probably reflect similar partial melting but at a higher degree and in a lower pressure environment. In contrast, the ferroan but metaluminous granites may be the result of extensive differentiation of tholeiitic basalt. Finally, the peralkaline igneous rocks at Mountain Pass have compositions potentially derived by differentiation of alkali basalt. The varying alkalic character of each subtype probably reflects polybaric petrogenesis and the corresponding effect of diverse mineral stabilities on ultimate melt compositions. Mantle-derived mafic magma and variably assimilated partial melts of mainly juvenile Paleoproterozoic crustal components are required to generate the relatively low initial strontium (87Sr/86Sr) and distinctive neodymium isotope compositions characteristic of the U.S. 1.4 Ga granitoid intrusions. The characteristics of these intrusions are consistent with crustal melting in an extensional/decompressional, intracratonic setting that was triggered by mantle upwelling and emplacement of tholeiitic basaltic magma at or near the base of the crust. Composite magmas, formed by mingling and mixing mantle components with partial melts of Paleoproterozoic crust, produced variably homogenized storage reservoirs that continued polybaric evolution as intrusions lodged at various crustal depths.

Scientific Investigations Report↗