Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Contribution”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78Linked to original sources

Studies of angiospermous woods in Australian brown coal by nuclear magnetic resonance and analytical pyrolysis: new insight into early coalification

Many Tertiary coals contain abundant fossilized remains of angiosperms, which commonly dominated the ancient peat-swamp environments; modern analogs of such swamps can be found in tropical and subtropical regions of the world. Comparisons of angiospermous wood from Australian brown coal with similar wood buried in modern peat swamps of Indonesia have provided some new insights into coalification reactions. These comparisons were made by using solid-state 13 C nuclear magnetic resonance (NMR) techniques and pyrolsis-gas chromatography-mass spectrometry (py-gc-ms). These two modern techniques are especially suited for detailed structural evaluation of the complex macromolecules in coal. The earliest transformation (peatification) of organic matter in angiospermous wood is the degradation and removal of cellulosic components and the concomitant selective preservation of lignin-derived components. The angiospermous lignin that becomes enriched in wood as a result of cellulose degradation also is modified by coalification reactions; this modification, however, does not involve degradation and removal of the lignin. Rather, the early coalification process transforms the lignin phenols (guiacyl and syringyl) to eventually yield the aromatic structures typically found in brown coal. One such transformation, which is determined from NMR data, involves the cleavage of aryl-ether bonds that link guaiacyl and syringyl units in lignin, and this transformation leads to the formation of free lignin phenols. Another transformation, which is also determined from the NMR data, involves the loss of methoxyl groups, probably via demethylation, to produce catechol-like structures. Coincident with ether-cleavage and demethylation, the aromatic rings derived from lignin phenols become more carbon-substituted and cross linked, as determined by dipolar-dephasing NMR studies. This cross linking is probably responsible for preventing the lignin phenols, which are freed from the lignin macromolecule by ether cleavage, from being removed from the coal by dissolution. Pyrolysis data suggest that the syringyl units are altered more readily than are guaiacyl units, and this difference in resistance leads to an enrichment of the guaiacyl units in fossil angiospermous woods. Many of the coalification reactions noted above occur to some degree in all angiospermous fossil wood examined; however, some significant differences are observed in the degree of coalification of the fossil wood samples from the same burial depth in the brown coal. These differences indicate that the depth and duration of burial are probably not entirely responsible for the variations in degree of coalification. Different rates of degradation in peat may have contributed to the variations in the apparent degree of coalification; some woods may have been altered more rapidly at the peat stage than others. Although preliminary, this systematic study of botanically related wood in peat and coal results in a more detailed differentiation of coalification reactions than have previous investigations. The combined use of solid-state 13 C NMR and py-gc-ms has facilitated this detailed insight into the coalification of angiospermous wood.

International Journal of Coal Geology↗

Tectonics and metallogenic provinces

Various theories have been advanced to explain the well-known uneven distribution of metals and ore-deposit types in space and time. Primordial differences in the mantle, preferential concentration of elements in the crust, the prevalence of ore-forming processes at certain times and (or) places, and combinations of one or several of these factors have all been called upon to account for the "metallogenic provinces," which can be defined loosely as regions containing similar deposits of one or a group of metals or minerals. Because many, perhaps most, provinces have complex, multistage origins, the relative importance of inheritance vs. process is still controversial. In recent years the geographic relationship of many geologically young provinces to present-day plate-tectonic positions (accreting or consuming margins, intraplate structures, etc.) has been widely recognized, and the presumption is strong that older provinces had similar relationships to former plates. As most ore deposits resulted from a favorable conjunction of geological processes that are no longer operative, elucidation of their genesis requires reconstruction of the geologic history of the province, with particular emphasis on events coeval with mineralization. Tectonic analysis is an important aspect of this reconstruction; data from orbiting satellites have contributed greatly to this analysis, as the voluminous literature of the past decade testifies. Both the synoptic view of large areas and the ability to emphasize faint contrasts have revealed linear, curvilinear, and circular features not previously recognized from field studies. Some of these undoubtedly reflect basement structures that have contributed to the development, or limit the extent, of metallogenic provinces. Their recognition and delineation will be increasingly valuable to the assessment of resources available and as guides to exploration for the ores needed by future generations. ?? 1983.

Advances in Space Research↗

Mechanisms for trace metal enrichment at the surface microlayer in an estuarine salt marsh

The relative contributions of adsorption to particulate surfaces, complexation with surface-active organic ligands and uptake by micro-organisms were evaluated with respect to their importance in the surface microlayer enrichment (‘partitioning’) of Cd, Pb and Cu. The contributions of each process were inferred from field data in which partitioning of the dissolved and particulate forms of Cd, Pb and Cu, total and dissolved organic carbon, particles and total bacteria were observed. In the South San Francisco Bay estuary, particle enrichment appears to control trace metal partitioning. Trace metal association with the particulate phase and the levels of partitioning observed were in the order Pb > Cu > Cd and reflect the calculated equilibrium chemical speciation of these metals in computer-simulated seawater matrices.

Marine Chemistry↗

Computer simulations of large asteroid impacts into oceanic and continental sites--Preliminary results on atmospheric, cratering and ejecta dynamics

Computer simulations have been completed that describe passage of a 10-km-diameter asteroid through the Earth's atmosphere and the subsequent cratering and ejecta dynamics caused by impact of the asteroid into both oceanic and continental sites. The asteroid was modeled as a spherical body moving vertically at 20 km/s with a kinetic energy of 2.6 × 10 30 ergs (6.2 × 10 7 Mt ). Detailed material modeling of the asteroid, ocean, crustal units, sedimentary unit, and mantle included effects of strength and fracturing, generic asteroid and rock properties, porosity, saturation, lithostatic stresses, and geothermal contributions, each selected to simulate impact and geologic conditions that were as realistic as possible. Calculation of the passage of the asteroid through a U.S. Standard Atmosphere showed development of a strong bow shock wave followed by a highly shock compressed and heated air mass. Rapid expansion of this shocked air created a large low-density region that also expanded away from the impact area. Shock temperatures in air reached ∼20, 000K near the surface of the uplifting crater rim and were as high as ∼2000K at more than 30 km range and 10 km altitude. Calculations to 30 s showed that the shock fronts in the air and in most of the expanding shocked air mass preceded the formation of the crater, ejecta, and rim uplift and did not interact with them. As cratering developed, uplifted rim and target material were ejected into the very low density, shock-heated air immediately above the forming crater, and complex interactions could be expected. Calculations of the impact events showed equally dramatic effects on the oceanic and continental targets through an interval of 120 s. Despite geologic differences in the targets, both cratering events developed comparable dynamic flow fields and by ∼29s had formed similar-sized transient craters ∼39km deep and ∼62km across. Transient-rim uplift of ocean and crust reached a maximum altitude of nearly 40 km at ∼30s and began to decay at velocities of 500 m/s to develop large-tsunami conditions. After ∼30s, strong gravitational rebound drove both craters toward broad flat-floored shapes. At 120 s, transient crater diameters were ∼80km (continental) and ∼105km (oceanic) and transient depths were ∼27km; crater floors consisting of melted and fragmented hot rock were rebounding rapidly upward. By 60 s, the continental crater had ejected ∼2 × 10 14 t, about twice the mass ejected from the oceanic crater. By 120 s, ∼70, 000km 3 (continental) and ∼90, 000km 3 (oceanic) target material were excavated (no mantle) and massive ejecta blankets were formed around the craters. We estimate that in excess of ∼70% of the ejecta would finally lie within ∼3 crater diameters of the impact, and the remaining ejecta (∼10 13 t), including the vaporized asteroid, would be ejected into the atmosphere to altitudes as high as the ionosphere. Effects of secondary volcanism and return of the ocean over hot oceanic crater floor could also be expected to contribute substantial material to the atmosphere.

International Journal of Impact Engineering↗

Lead isotopes in iron and manganese oxide coatings and their use as an exploration guide for concealed mineralization

Lead isotopes from Fe and Mn oxides that coat stream pebbles from around the Mount Emmons porphyry molybdenum deposit in Colorado were studied to assess the feasibility of using Pb isotopes to detect concealed mineral deposits. The Fe/Mn oxide coatings were analyzed to determine their elemental concentrations using ICP-AES. The Pb isotope compositions of solutions from a selected suite of samples were measured, using both thermal ionization and ICP mass spectrometry, to compare results determined by the two analytical methods. Heavy mineral concentrates from the same sites were also analyzed to compare the Pb isotope compositions of the Fe/Mn coatings with those found in panned concentrates. The Fe/Mn and 206 Pb/ 204 Pb ratios of the oxide coatings are related to the lithology of the host rocks; Fe/Mn oxide coatings on pebbles of black shale have higher Fe/Mn values than do the coatings on either sandstone or igneous rocks. The shale host rocks have a more radiogenic signature (e.g. higher 206 Pb/ 204 Pb) than the sandstone or igneous host rocks. The Pb isotope data from sandstone and igneous hosts can detect concealed mineralized rock on both a regional and local scale, even though there are contributions from: (1) metals from the main-stage molybdenite ore deposit; (2) metals from the phyllic alteration zone which has a more radiogenic Pb isotope signature reflecting hydrothermal leaching of Pb from the Mancos Shale; (3) Pb-rich base metal veins with a highly variable Pb isotope signature; and (4) sedimentary country rocks which have a more radiogenic Pb isotope signature. An investigation of within-stream variation shows that the Pb isotope signature of the molybdenite ore zone is retained in the Fe/Mn oxide coatings and is not camouflaged by contributions from Pb-rich base-metal veins that crop out upstream. In another traverse, the Pb isotope data from Fe/Mn oxide coatings reflect a complex mixing of Pb from the molybdenite ore zone and its hornfels margin, Pb-rich base-metal veins, and sedimentary country rocks. Stream-sediment anomalies detected using oxalic acid leaches can be evaluated using Pb isotope analysesof selected geochemical anomalies. Such an evaluation procedure, given regional target Pb isotope signatures for concealed mineralization, can greatly reduce the cost of exploration for undiscovered ore deposits concealed beneath barren overburden. Lead isotope measurements on aliquots of the same solutions showed that ICP-MS determinations are of low precision and vary non-systematically when compared with the Pb isotope values of the higher precision thermal ionization method. These variations and lower precision of the ICP-MS measurements are attributed to matrix effects.

Colorado↗

Reproduction and reproductive strategies relevant to management of Whooping Cranes ex situ

Due to the small population size (∼400 birds) and continuing threats to wild Whooping Cranes ( Grus americana ), an ex situ (captive) population is maintained to contribute to the recovery of the species. The goals of the captive breeding program are to provide opportunity for research and birds for reintroduction. However, reproduction among captive birds is far from optimal. Specifically, whooping cranes maintained ex situ experience delayed onset of reproduction as well as low rates of egg production and egg fertility when compared to wild populations. To improve the contribution of the captive population to Whooping Crane recovery, there is a need to (1) advance the understanding about the mechanisms regulating ovarian function and egg production, especially the influence of males (their presence and behavior) on endocrine and reproductive behavior in females, as well as (2) identify the underlying cause(s) of poor reproduction in Whooping Cranes housed ex situ. In this chapter, we summarize current knowledge of Whooping Crane reproduction with a focus on egg production and fertility. We also discuss management strategies, such as environmental management, and reproductive technologies, including artificial insemination and sperm cryopreservation that may benefit captive reproduction, and finish with a discussion of future research priorities.

Book chapter↗

The San Andreas Fault System--Complexities along a major transform fault system and relation to earthquake hazards

The San Andreas Fault System is a 1300-km-long transform boundary that accommodates motion between the North American and Pacific Plates. New technologies and data reveal rich details about the present configuration of faults, distribution of strain and associated seismic hazard on this complex network of faults. This contribution provides a brief summary of the geologic history of the San Andreas Fault System, followed by an introduction to recent research that has changed understanding of the hazards along the main faults. Organized by region, we highlight a selection of recent research using new geodetic techniques, improved topographic data, advanced geochronologic methods, and high-resolution geophysics. The contribution ends with a review of the historic earthquakes on the San Andreas and San Jacinto Faults, comparing these to past ruptures interpreted from paleoseismic studies.

California↗

Near surface sediments introduce low frequency noise into gravity models

3D geologic modeling and mapping often relies on gravity modeling to identify key geologic structures, such as basin depth, fault offset, or fault dip. Such gravity models generally assume either homogeneous or spatially uncorrelated densities within modeled rock bodies and overlying sediments, with average densities typically derived from surface and drill-hole sampling. The noise contributed to the gravity anomaly by these density assumptions is zero in the homogeneous case and typically <200 μGal in the uncorrelated case. Rock bodies and sediments, however, show both a range of densities and spatial correlation of these densities, in both surface and drill-hole samples, and this correlation causes an increase in power in the low frequency content of the resulting gravity anomaly. Spatial correlation of densities can be modeled as a Gaussian random field (GRF), with the random field parameters derived from drill-hole and geologic map data. Data from alluvial fan sediments in southern Nevada indicate correlation lengths of up to 300 m in the vertical dimension and kilometers in the horizontal dimension. The resulting GRF density models show that the noise contributed to the measured gravity anomaly is of low frequency and can be several mGal in amplitude, contradicting the common attribution of lower frequencies to deeper sources. This low-frequency noise increases in power with an increase in sediment thickness. Its presence increases the ambiguity of interpretations of subsurface geologic body shape, such as basin analyses that attempt to quantify concealed basement fault depths, offsets, and dip angles. In the southwestern United States, where basin analyses are important for natural resource applications, such ambiguity increases the uncertainty of subsequent process modeling.

Applied Computing and Geosciences↗

Transport of biologically important nutrients by wind in an eroding cold desert

Wind erosion following fire is an important landscape process that can result in the redistribution of ecologically important soil resources. In this study we evaluated the potential for a fire patch in a desert shrubland to serve as a source of biologically important nutrients to the adjacent, downwind, unburned ecosystem. We analyzed nutrient concentrations (P, K, Ca, Mg, Cu, Fe, Mn, Al) in wind-transported sediments, and soils from burned and adjacent unburned surfaces, collected during the first to second growing seasons after a wildfire that burned in 2007 in Idaho, USA in sagebrush steppe; a type of cold desert shrubland. We also evaluated the timing of potential wind erosion events and weather conditions that might have contributed to nutrient availability in downwind shrubland. Findings indicated that post-fire wind erosion resulted in an important, but transient, addition of nutrients on the downwind shrubland. Aeolian sediments from the burned area were enriched relative to both the up- and down-wind soil and indicated the potential for a fertilization effect through the deposition of the nutrient-enriched sediment during the first, but not second, summer after wildfire. Weather conditions that could have produced nutrient transport events might have provided increased soil moisture necessary to make nutrients accessible for plants in the desert environment. Wind transport of nutrients following fire is likely important in the sagebrush steppe as it could contribute to pulses of resource availability that might, for example, affect plant species differently depending on their phenology, and nutrient- and water-use requirements.

Idaho↗

Sustainable aquifer management for food security

In aquifer-dependent regions, balancing aquifer protection, desalination, economic development, agricultural irrigation, and food security can be better managed through discovery and development of sources of sustainable groundwater pumping. Aquifer desalination for irrigation to protect food security can mitigate pressure on local freshwater aquifers. Despite its importance, little peer reviewed work to date has identified the economic capacity to pay for aquifer desalination for irrigation to mitigate freshwater aquifer drawdown. The novel contribution of this work is the development and application of an innovative method to assess the economic capacity to pay for aquifer desalination for irrigation for a recently discovered large saline aquifer. It develops an original framework to assess the capacity to pay for aquifer desalination, the results of which can help guide policymakers on efficient and sustainable pumping approaches across users, aquifers, and time periods. A mathematical programming model is developed to economically analyze the 200 billion cubic meter Lotikipi Aquifer, discovered in 2013 in northern Kenya using modern remote sensing methods. While initial pumping of the Lotikipi Aquifer was halted due to high groundwater salinity levels, interest remains strong in assessing the economic capacity to pay for groundwater desalination because of its potential role in protecting regional food security generated by aquifer pumping for irrigation. The model is formulated by calibrating optimized pumping patterns in two existing freshwater aquifers to replicate observed historical pumping levels. Based on that exercise, a second model is developed to identify a least cost set of pumping restrictions that return each of three regional aquifers to starting conditions over a seven-year time period. A third model extends the second by adding a constraint of a minimum required level of food grain security supported by irrigation pumping from the aquifer system. Results show that the economic capacity to pay for aquifer desalination for irrigated agriculture lies in the range of $0.08 - $0.18 USD per cubic meter under current economic conditions and desalination technologies available. While this economic capacity to pay is lower than its current cost in most places, the future could be more optimistic. Advances in desalination technology, higher crop prices, technical advance in agriculture, and development of drought-resistant crops can all contribute to a future capacity to economically justify the expense of desalination.

Agricultural Systems Journal↗

Use of spatial statistics and isotopic tracers to measure the influence of arsenical pesticide use on stream sediment chemistry in New England, USA

Arsenical pesticides and herbicides, principally Pb arsenate, Ca arsenate, and Na arsenate with lesser use of other metal-As pesticides, were widely applied on apple, blueberry, and potato crops in New England during the first half of the twentieth century. Agricultural census data for this time period is used to define an agricultural index that identifies areas that are inferred to have used arsenical pesticides extensively. Factor analysis on metal concentrations in 1597 stream sediment samples collected throughout New England, grouped by agricultural-index categories, indicate a positive association of areas with stream sediment sample populations that contain higher As and Pb concentrations than samples from the region as a whole with sample site settings having high agricultural-index values. Population statistics for As and Pb concentrations and factor scores for an As-Pb factor all increase systematically and significantly with increasing agricultural-index intensity in the region, as tested by Kruskal-Wallis analysis. Lead isotope compositions for 16 stream sediments from a range of agricultural-index settings generally overlap the observed variation in rock sulfides and their weathering products; however, sediments collected from high agricultural-index settings have slightly more radiogenic Pb compositions, consistent with an industrial Pb contribution to these samples. Although weathering products from rocks are likely to be the dominant source of As and metals to most of the stream sediment samples collected in the region, the widespread use of arsenical pesticides and herbicides in New England during the early 1900-1960s appears to be a significant anthropogenic source of As and metals to many sediments in agricultural areas in the region and has raised background levels of As in some regions. Elevated concentrations of As in stream sediments are of concern for two reasons. Stream sediments with elevated As concentrations delineate areas with elevated background concentrations of As from both natural rock and anthropogenic sources that may contribute As to groundwater systems used for drinking water supplies. Conversion of agricultural land contaminated with arsenical pesticide residues to residential development may increase the likelihood that humans will be exposed to As. In addition, many stream sediment sites have As concentrations that exceed sediment quality guidelines established for freshwater ecosystems. Thirteen percent of the New England sediment sample sites exceed 9.79 mg/kg As, the threshold effects concentration (TEC), below which harmful effects are unlikely to be observed. Arsenic concentrations exceed 33 mg/kg, the probable effects concentration (PEC), above which harmful effects on sediment-dwelling organisms are expected to occur frequently, at 1.25% of the sediment sample sites. The sample sites that exceed the PEC value occur predominately in agricultural areas that used arsenical pesticides.

Conference Paper↗

Net alkalinity and net acidity 1: Theoretical considerations

Net acidity and net alkalinity are widely used, poorly defined, and commonly misunderstood parameters for the characterization of mine drainage. The authors explain theoretical expressions of 3 types of alkalinity (caustic, phenolphthalein, and total) and acidity (mineral, CO2, and total). Except for rarely-invoked negative alkalinity, theoretically defined total alkalinity is closely analogous to measured alkalinity and presents few practical interpretation problems. Theoretically defined "CO 2-acidity" is closely related to most standard titration methods with an endpoint pH of 8.3 used for determining acidity in mine drainage, but it is unfortunately named because CO2 is intentionally driven off during titration of mine-drainage samples. Using the proton condition/mass- action approach and employing graphs to illustrate speciation with changes in pH, the authors explore the concept of principal components and how to assign acidity contributions to aqueous species commonly present in mine drainage. Acidity is defined in mine drainage based on aqueous speciation at the sample pH and on the capacity of these species to undergo hydrolysis to pH 8.3. Application of this definition shows that the computed acidity in mg L -1 as CaCO3 (based on pH and analytical concentrations of dissolved FeII, FeIII, Mn, and Al in mg L -1):aciditycalculated=50{1000(10-pH)+[2(FeII)+3(FeIII)]/56+2(Mn)/ 55+3(Al)/27}underestimates contributions from HSO4- and H+, but overestimates the acidity due to Fe3+ and Al3+. However, these errors tend to approximately cancel each other. It is demonstrated that "net alkalinity" is a valid mathematical construction based on theoretical definitions of alkalinity and acidity. Further, it is shown that, for most mine-drainage solutions, a useful net alkalinity value can be derived from: (1) alkalinity and acidity values based on aqueous speciation, (2) measured alkalinity minus calculated acidity, or (3) taking the negative of the value obtained in a standard method "hot peroxide" acidity titration, provided that labs report negative values. The authors recommend the third approach; i.e., net alkalinity = -Hot Acidity. ?? 2005 Elsevier Ltd. All rights reserved.

Applied Geochemistry↗

New isotopic evidence for the origin of groundwater from the Nubian Sandstone Aquifer in the Negev, Israel

The geochemistry and isotopic composition (H, O, S, O sulfate , C, Sr) of groundwater from the Nubian Sandstone (Kurnub Group) aquifer in the Negev, Israel, were investigated in an attempt to reconstruct the origin of the water and solutes, evaluate modes of water–rock interactions, and determine mean residence times of the water. The results indicate multiple recharge events into the Nubian sandstone aquifer characterized by distinctive isotope signatures and deuterium excess values. In the northeastern Negev, groundwater was identified with deuterium excess values of ∼16‰, which suggests local recharge via unconfined areas of the aquifer in the Negev anticline systems. The δ 18 O H2O and δ 2 H values (−6.5‰ and −35.4‰) of this groundwater are higher than those of groundwater in the Sinai Peninsula and southern Arava valley (−7.5‰ and −48.3‰) that likewise have lower deuterium excess values of ∼10‰. Based on the geochemical differences between groundwater in the unconfined and confined zones of the aquifer, a conceptual geochemical model for the evolution of the groundwater in the Nubian sandstone aquifer has been reconstructed. The isotopic composition of shallow groundwater from the unconfined zone indicates that during recharge oxidation of pyrite to SO 4 ( δ 34 S SO4 ∼−13‰; δ 18 O SO4 ∼+7.7‰) and dissolution of CaCO 3 ( 87 Sr/ 86 Sr ∼0.70787; δ 13 C DIC = −3.7‰) occur. In the confined zone of the aquifer, bacterial SO 4 reduction removes a significant part of dissolved SO 4 2 - "> SO42- , thereby modifying its isotopic composition ( δ 34 S SO4 ∼−2‰; δ 18 O SO4 ∼+8.5‰) and liberating dissolved inorganic C that contains little or no radiocarbon ( 14 C-free) with low δ 13 C DIC values (<−12‰). In addition to local recharge, the Sr and S isotopic data revealed contribution of external groundwater sources to the Nubian Sandstone aquifer, resulting in further modifications of the groundwater chemical and isotopic signatures. In the northeastern Negev, it is shown that SO 4 -rich groundwater from the underlying Jurassic aquifer contributes significantly to the salt budget of the Nubian Sandstone aquifer. The unique chemical and isotopic composition of the Jurassic groundwater ( δ 34 S SO4 ∼ +14‰; δ 18 O SO4 ∼ 14‰; 87 Sr/ 86 Sr ∼0.70764) is interpreted as reflecting dissolution of Late Triassic marine gypsum deposits. In the southern Arava Valley the authors postulate that SO 4 -rich groundwater with distinctively high Br/Cl (3 × 10 −3 ) low 87 Sr/ 86 Sr (0.70734), and high δ 34 S SO4 values (+15‰) is derived from mixing with underlying brines from the Paleozoic units. The radiocarbon measurements reveal low 14 C activities (0.2–5.8 pmc) in both the northeastern Negev and southern Arava Valley. Taking into account dissolution of carbonate rocks and bacterial SO 4 reduction in the unconfined area, estimated mean residence times of groundwater in the confined zone in the northeastern Negev are on the order of 21–38 ka, which suggests recharge predominantly during the last glacial period. The 14 C signal in groundwater from the southern Arava Valley is equally low but due to evidence for mixing with external water sources the residence time estimates are questionable.

Applied Geochemistry↗

Sulfide oxidation and distribution of metals near abandoned copper mines in coastal environments, Prince William Sound, Alaska, USA

The oxidation of sulfide-rich rocks, mostly leftover debris from Cu mining in the early 20th century, is contributing to metal contamination of local coastal environments in Prince William Sound, Alaska. Analyses of sulfide, water, sediment, precipitate and biological samples from the Beatson, Ellamar, and Threeman mine sites show that acidic surface waters generated from sulfide weathering are pathways for redistribution of environmentally important elements into and beyond the intertidal zone at each site. Volcanogenic massive sulfide deposits composed of pyrrhotite and (or) pyrite + chalcopyrite + sphalerite with subordinate galena, arsenopyrite, and cobaltite represent potent sources of Cu, Zn, Pb, As, Co, Cd, and Hg. The resistance to oxidation among the major sulfides increases in the order pyrrhotite ??? sphalerite < chalcopyrite ??? pyrite; thus, pyrrhotite-rich rocks are typically more oxidized than those dominated by pyrite. The pervasive alteration of pyrrhotite begins with rim replacement by marcasite followed by replacement of the core by sulfur, Fe sulfate, and Fe-Al sulfate. The oxidation of chalcopyrite and pyrite involves an encroachment by colloform Fe oxyhydroxides at grain margins and along crosscutting cracks that gradually consumes the entire grain. The complete oxidation of sulfide-rich samples results in a porous aggregate of goethite, lepidocrocite and amorphous Fe-oxyhydroxide enclosing hydrothermal and sedimentary silicates. An inverse correlation between pH and metal concentrations is evident in water data from all three sites. Among all waters sampled, pore waters from Ellamar beach gravels have the lowest pH (???3) and highest concentrations of base metals (to ???25,000 ??g/L), which result from oxidation of abundant sulfide-rich debris in the sediment. High levels of dissolved Hg (to 4100 ng/L) in the pore waters probably result from oxidation of sphalerite-rich rocks. The low-pH and high concentrations of dissolved Fe, Al, and SO4 are conducive to precipitation of interstitial jarosite in the intertidal gravels. Although pore waters from the intertidal zone at the Threeman mine site have circumneutral pH values, small amounts of dissolved Fe2+ in the pore waters are oxidized during mixing with seawater, resulting in precipitation of Fe-oxyhydroxide flocs along the beach-seawater interface. At the Beatson site, surface waters funneled through the underground mine workings and discharged across the waste dumps have near-neutral pH (6.7-7.3) and a relatively small base-metal load; however, these streams probably play a role in the physical transport of metalliferous particulates into intertidal and offshore areas during storm events. Somewhat more acidic fluids, to pH 5.3, occur in stagnant seeps and small streams emerging from the Beatson waste dumps. Amorphous Fe precipitates in stagnant waters at Beatson have high Cu (5.2 wt%) and Zn (2.3 wt%) concentrations that probably reflect adsorption onto the extremely high surface area of colloidal particles. Conversely, crystalline precipitates composed of ferrihydrite and schwertmannite that formed in the active flow of small streams have lower metal contents, which are attributed to their smaller surface area and, therefore, fewer reactive sorption sites. Seeps containing precipitates with high metal contents may contribute contaminants to the marine environment during storm-induced periods of high runoff. Preliminary chemical data for mussels (Mytilus edulis) collected from Beatson, Ellamar, and Threeman indicate that bioaccumulation of base metals is occurring in the marine environment at all three sites.

Applied Geochemistry↗

Application of iron and zinc isotopes to track the sources and mechanisms of metal loading in a mountain watershed

Here the hydrogeochemical constraints of a tracer dilution study are combined with Fe and Zn isotopic measurements to pinpoint metal loading sources and attenuation mechanisms in an alpine watershed impacted by acid mine drainage. In the tested mountain catchment, δ 56 Fe and δ 66 Zn isotopic signatures of filtered stream water samples varied by ∼3.5‰ and 0.4‰, respectively. The inherent differences in the aqueous geochemistry of Fe and Zn provided complimentary isotopic information. For example, variations in δ 56 Fe were linked to redox and precipitation reactions occurring in the stream, while changes in δ 66 Zn were indicative of conservative mixing of different Zn sources. Fen environments contributed distinctively light dissolved Fe (<−2.0‰) and isotopically heavy suspended Fe precipitates to the watershed, while Zn from the fen was isotopically heavy (>+0.4‰). Acidic drainage from mine wastes contributed heavier dissolved Fe (∼+0.5‰) and lighter Zn (∼+0.2‰) isotopes relative to the fen. Upwelling of Fe-rich groundwater near the mouth of the catchment was the major source of Fe ( δ 56 Fe ∼ 0‰) leaving the watershed in surface flow, while runoff from mining wastes was the major source of Zn. The results suggest that given a strong framework for interpretation, Fe and Zn isotopes are useful tools for identifying and tracking metal sources and attenuation mechanisms in mountain watersheds.

Applied Geochemistry↗

Continental-scale patterns in soil geochemistry and mineralogy: results from two transects across the United States and Canada

In 2004, the US Geological Survey (USGS) and the Geological Survey of Canada (GSC) initiated a pilot study that involved collection of more than 1500 soil samples from 221 sites along two continental transects across Canada and the United States. The pilot study was designed to test and refine protocols for a soil geochemical survey of North America. The two transects crossed a wide array of soil parent materials, soil ages, climatic conditions, landforms, land covers and land uses. Sample sites were selected randomly at approximately 40-km intervals from a population defined as all soils of the continent. At each site, soils representing 0 to 5 cm depth, and the O, A, and C horizons, if present, were collected and analyzed for their near-total content of over 40 major and trace elements. Soils from 0–5 cm depth were also collected for analysis of organic compounds. Results from the transects confirm that soil samples collected at a 40-km spacing reveal coherent, continental- to subcontinental-scale geochemical and mineralogical patterns that can be correlated to aspects of underlying soil parent material, soil age and climate influence. The geochemical data also demonstrate that at the continental-scale the dominance of any of these major factors that control soil geochemistry can change across the landscape. Along both transects, soil mineralogy and geochemistry change abruptly with changes in soil parent materials. However, the chemical influence of a soil’s parent material can be obscured by changing climatic conditions. For the transects, increasing precipitation from west to east and increasing temperature from north to south affect both soil mineralogy and geochemistry because of climate effects on soil weathering and leaching, and plant productivity. Regional anomalous metal concentrations can be linked to natural variations in soil parent materials, such as high Ni and Cr in soils developed on ultramafic rocks in California or high P in soils formed on weathered Ordovician limestones in central Kentucky. On local scales, anomalous metal concentrations recognized in soil profiles, such as high P in soils from animal confinement sites, are consistent with local anthropogenic disturbances. At a larger scale, the distribution of Hg across the west to east transect demonstrates that it can be difficult to distinguish between natural or anthropogenic contributions and that many factors can contribute to an element’s spatial distribution. Only three samples in a subset of seventy-three 0–5 cm depth soil samples from the north to south transect had organochlorine pesticides values above the method detection limit, apparently related to historic usage of the pesticides DDT and dieldrin.

Applied Geochemistry↗

Geomorphic controls on mercury accumulation in soils from a historically mined watershed, Central California Coast Range, USA

Historic Hg mining in the Cache Creek watershed in the Central California Coast Range has contributed to the downstream transport of Hg to the San Francisco Bay-Delta. Different aspects of Hg mobilization in soils, including pedogenesis, fluvial redistribution of sediment, volatilization and eolian transport were considered. The greatest soil concentrations (>30 mg Hg kg -1 ) in Cache Creek are associated with mineralized serpentinite, the host rock for Hg deposits. Upland soils with non-mineralized serpentine and sedimentary parent material also had elevated concentrations (0.9-3.7 mg Hg kg -1 ) relative to the average concentration in the region and throughout the conterminous United States (0.06 mg kg -1 ). Erosion of soil and destabilized rock and mobilization of tailings and calcines into surrounding streams have contributed to Hg-rich alluvial soil forming in wetlands and floodplains. The concentration of Hg in floodplain sediment shows sediment dispersion from low-order catchments (5.6-9.6 mg Hg kg -1 in Sulphur Creek; 0.5-61 mg Hg kg -1 in Davis Creek) to Cache Creek (0.1-0.4 mg Hg kg -1 ). These sediments, deposited onto the floodplain during high-flow storm events, yield elevated Hg concentrations (0.2-55 mg Hg kg -1 ) in alluvial soils in upland watersheds. Alluvial soils within the Cache Creek watershed accumulate Hg from upstream mining areas, with concentrations between 0.06 and 0.22 mg Hg kg -1 measured in soils ~90 km downstream from Hg mining areas. Alluvial soils have accumulated Hg released through historic mining activities, remobilizing this Hg to streams as the soils erode.

Applied Geochemistry↗

Arsenic in sediments, groundwater, and streamwater of a glauconitic Coastal Plain terrain, New Jersey, USA-Chemical " fingerprints" for geogenic and anthropogenic sources

Glauconite-bearing deposits are found worldwide, but As levels have been determined for relatively few. The As content of glauconites in sediments of the Inner Coastal Plain of New Jersey can exceed 100 mg/kg, and total As concentrations (up to 5.95 μg/L) found historically and recently in streamwaters exceed the State standard. In a major watershed of the Inner Coastal Plain, chemical “fingerprints” were developed for streambed sediments and groundwater to identify contributions of As to the watershed from geologic and anthropogenic sources. The fingerprint for streambed sediments, which included Be, Cr, Fe and V, indicated that As was predominantly of geologic origin. High concentrations of dissolved organic C, nutrients (and Cl − ) in shallow groundwater indicated anthropogenic inputs that provided an environment where microbial activity released As from minerals to groundwater discharging to the stream. Particulates in streamwater during high flow constituted most of the As load; the chemical patterns for these particulates resembled the geologic fingerprint of the streambed sediments. The As/Cr ratio of these suspended particles likely indicates they derived not only from runoff, but from groundwater inputs, because As contributed by groundwater is sequestered on streambed sediments. Agricultural inputs of As were not clearly identified, although chemical characteristics of some sediments indicated vehicle-related inputs of metals. Sediment sampling during dry and wet years showed that, under differing hydrologic conditions, local anthropogenic fingerprints could be obscured but the geologic fingerprint, indicating glauconitic sediments as an As source, was robust.

New Jersey↗