Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Geophysical Research - Atmospheres”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77Linked to original sources
USGS2012

Implications of the Surveyor 7 results

The chemical and television data from the Surveyor 7 mission are discussed. The significance of the α-scattering analysis is found to depend on whether the flow unit underlying the spacecraft was laid down by mass flow at the time of the Tycho-forming impact. The chemical composition of the site is significantly lower in Fe than the composition of the previously analyzed mare sites; no other resolvable distinctions can be made. The higher albedo of the highlands is attributed to the lower iron content in the silicate minerals. By assigning the atomic composition to minerals common in basaltic rocks, we estimate-the highland rock density to be 3.0 and the mare density to be 3.2. The densities may be incorporated into a discussion of recent information on the gravitational field of the moon, yielding estimates of crustal thickness in the highlands around 30 to 50 km. A number of television pictures of rocks and fragments are shown, and we offer some suggestions about the type and origin of these objects. They compose a heterogeneous population in which the brighter rocks seem to be more resistant to mechanical breakdown than the dark rocks. The characteristics of the fine-grained component of the surface mantle are found to be similar to those at earlier Surveyor sites. The process of eroding exposed rocks and covering them with a blanket of fine particles appears to be relatively less advanced than at the sites previously studied; A bright line of light was seen on the western horizon after sunset, as was observed during Surveyor 5 and 6; this rather puzzling phenomenon is discussed again.

Journal of Geophysical Research↗
USGS2012

Observations of the lunar regolith and the Earth from the television camera on Surveyor 7

Surveyor 7, the last spacecraft of the Surveyor series, landed about 30 km north of the rim crest of Tycho, one of the most prominent and well-known features in the southern part of the moon. About 21,000 pictures were transmitted during two lunar days of operation. At the Surveyor 7 site, the cumulative size-frequency distribution of craters 13 cm to 3 meters in diameter follows closely the distribution of craters observed at the other Surveyor sites in the lunar maria. This distribution of small craters is believed to be a steady-state distribution.

Journal of Geophysical Research↗
USGS2012

Surface coating effects in remote sensing measurements

Measurements of the infrared spectra of a liquid-(water) coated quartz substrate and a solid-(pyrophyllite) coated quartzite are compared to theoretical values. Results demonstrate that in the case of the water-coated quartz, a loss in spectral contrast of the quartz emission occurs at the principal restrahlen wavelengths of 8.5, 9.0, and 12.5 µ but is most pronounced at 12.5 µ. In the case of pyrophyllite-coated quartzite, additional spectral features appear between 8.0 and 10.0 µ as the exposure of quartzite through the pyrophyllite coating is increased. Addition of the pure quartzite and pyrophyllite spectra, weighted by exposed area, is shown to satisfactorily describe the composite spectra.

Journal of Geophysical Research↗
USGS2012

Energy and plane waves in linear viscoelastic media

The mathematical framework for describing plane waves in elastic and linear anelastic media is presented. Theoretical results suggest that the nature of plane waves in anelastic materials is distinctly different from the nature of plane waves in elastic materials. In elastic media the only type of inhomogeneous plane wave ( P or S ) that can propagate is one for which planes of constant phase are perpendicular to planes of constant amplitude. However, in anelastic media this is the only type of inhomogeneous wave that cannot propagate. For an inhomogeneous P or S plane wave the particle motion is elliptical, the velocity is less than that of a corresponding homogeneous wave, the maximum attenuation is greater than that of a corresponding homogeneous wave, and the direction of maximum energy flow is not the direction of phase propagation. Expressions for the energy flux, energy densities, dissipated energy, stored energy, and Q −1 are derived from an explicit energy conservation relation, valid for an arbitrary steady state viscoelastic radiation field. Each energy expression is valid for homogeneous or inhomogeneous P or S plane waves in elastic or linear anelastic media.

Journal of Geophysical Research↗
USGS2012

Geochemistry of thermal waters in Long Valley, Mono County, California

Thermal springs and wells in Long Valley, California, issue sodium bicarbonate‐chloride waters containing 1000–1420 mg/l of dissolved solids. Thermal waters of sodium bicarbonate‐chloride composition are usually associated with hot‐water reservoirs. Chloride concentrations and stable isotope data indicate that the thermal waters have had varied histories. All of the thermal springs issue a mixture of fluid from the thermal reservoir and less saline, cooler water from one or more shallow aquifers. The composition of springs in Hot Creek Gorge may have been further altered by minor subsurface boiling. Thermal springs between Hot Creek and Lake Crowley issue mixtures of fresh and thermal waters which have lost heat by conductive cooling and changed composition by reaction with rock in the shallow aquifer. The silica content of water from Magma Richie 5 and mixing calculations based on the concentrations of silica in thermal waters collected from springs in Hot Creek Gorge and along Little Hot Creek indicate a temperature of at least 200°C in the thermal reservoir. The sodium‐potassium‐calcium geothermometer yields a reservoir temperature estimate near 200°C for most of the thermal springs. If geothermal energy is developed in Long Valley, the high concentrations of arsenic (up to 2.2 mg/l), boron (up to 15 mg/l), and total dissolved solids in the thermal fluids will make it necessary to isolate the effluent of production wells from the freshwater system.

California↗
USGS2012

Preseismic and coseismic deformation associated with the Hollister, California, earthquake of November 28, 1974

The epicenter of the Hollister earthquake ( M L = 5.1) of November 28, 1974, is located near the center of an 81‐line trilateration network which has been surveyed annually since 1971. Five lines in the neighborhood of the epicenter were surveyed just 2 days before the earthquake, and two other lines nearby were surveyed 48 days earlier. Although some of these measurements suggest a possible preearthquake anomaly in line length, the anomaly is within the uncertainty in measurement. A comparison of the most recent preearthquake survey (June 1974) and the most immediate postearthquake survey (December 1974 to January 1975) of the entire network indicates a uniform linear contraction of about 0.8 ppm. This is most reasonably attributed to survey error even though a systematic error of that magnitude is unexpected. We conclude that no demonstrable preseismic or coseismic deformation was detected and suggest that an upper limit for these phenomena is less than 1 ppm in line length. A reasonable dislocation model for the Hollister earthquake yields coseismic changes in line length not greater than a few parts in 10 7 , well below the limit of detection in Geodolite surveys.

California↗
USGS2012

Determination of three‐dimensional velocity anomalies under a seismic array using first P arrival times from local earthquakes: 1. A homogeneous initial model

Geiger's method of locating local earthquakes has been extended to include the effect of P velocity variation along the ray paths in three dimensions. The crustal structure was modeled by rectangular blocks, and a parameter was assigned to each block describing the perturbation of P wave slowness in the block. On the basis of an initial model, a set of linear equations for the observed first P arrival times was formulated in terms of the source and medium parameters. The source parameters for all the earthquakes in the data set and medium parameters for all the blocks penetrated by the seismic rays were then determined simultaneously by the damped least squares method. A computer program has been written for the case of a homogeneous initial medium model with constant P velocity. It has been tested with artificial data and applied to a set of local earthquakes recorded by a dense seismic array in Bear Valley, California. The resultant velocity distribution in the top 5 km shows a narrow low‐velocity zone of about 5 km/s in the San Andreas fault zone sandwiched between high‐velocity regions of about 6 km/s.

California↗
USGS2012

Relocation of local earthquakes by seismic ray tracing

Seismic ray tracing is used to relocate a set of local earthquakes recorded by a dense seismic array in Bear Valley, California. The crustal velocity structure is two-dimensional and incorporates most of the known and inferred velocity differences in the region. Relocated hypocenters fall within the San Andreas fault zone, and P residuals, without elevation or station corrections, now appear to be more internally consistent in the rms sense. Ray takeoff angles and azimuths are distinctly different from those of a uniformly layered earth model. Focal mechanism solutions using only traced data are well determined and have few inconsistent data. Zones of convergence and divergence of rays suggest large variations in observed amplitudes across the local network.

California↗
USGS2012

Heat-flow data and their relation to observed geothermal phenomena near Klamath Falls, Oregon

Two holes were drilled to depths of about 180 m in the Lower Klamath Lake basin south of Klamath Falls, Oregon, to obtain heat flow data and to provide estimates of the thermal conductivity of the valley fill. Twenty-nine thermal conductivity determinations on eight cores give a mean conductivity of 1.82 mcal/cm s °C (0.75 W/m °K). Curvature in the upper 50 m of both terriperature profiles indicates a decrease in surface temperature of about 1.8°C, presumably resulting frorn reclamation of what was marshland in the early part of this century. A surprisingly low heat flow of 0.3 HFU (1 HFU = 10 −6 cal/cm 2 s = 41.8 mW/m 2 ) was measured at site LS near the center of the basin. At site OC-1, 7 km east of LS and 2 km from the Klamath Hills geothermal zone, the heat flow was 1.44 HFU, also a low value in this setting. Temperature profiles in 15 unused water wells in the area had linear gradients ranging from 47° to 170°C/km. The corresponding lower limits of heat flow (conductivities measured at the two heat flow sites being used) range from 0.8 to 3.1 HFU. These variations in heat flow evidently are caused by temperature variations in a convecting system within the near-surface volcanic rocks and do not provide firm constraints on the nature of heat sources at depth.

Journal of Geophysical Research↗
USGS2012

Strain accumulation on the San Andreas Fault near Palmdale, California

Precise distance measurements of a 10×25 km 15‐station trilateration network that spans the San Andreas fault west of Palmdale, California, have been repeated annually in the period 1971–1975. The network appears to be deforming under simple uniform tensor shear of about 0.21±0.03 μstrain/yr with the direction of maximum right‐lateral shear parallel to the local strike of the San Andreas fault. Comparison of trilateration with triangulation surveys of the same network shows that the rate of strain accumulation has been constant over the past 40 yr. The strain accumulation can be explained by conventional dislocation models (i.e., slip at depth beneath a locked section) of the San Andreas fault with 30‐ to 50‐mm/yr slip. Leveling surveys along a 16‐km line that crosses the fault at Palmdale indicate significant changes in tilt but with frequent reversals, so that no net tilt has accumulated in the overall period 1935–1975.

California↗
USGS2012

Implications of a magnetic model of the Long Valley caldera, California

A quantitative magnetic model of Long Valley, California, shows that the magnetic field above this caldera is dominated by intracaldera Bishop tuff, part of the ash flow tuff whose eruption precipitated the caldera collapse. We propose that about half of the 350 km 3 of intracaldera Bishop tuff, or that part beneath the resurgent dome, has been subjected to extensive hydrothermal alteration. The heat that produced this alteration is apparently associated with the residual magma chamber, and much of the formation may still be hot (>200°C). The magnetic minerals in the remaining intracaldera Bishop tuff have not been drastically altered, presumably because the tuff was not heated sufficiently. As a result, the tuff may not be very hot today. The model also reveals the existence of parts of two large precaldera mountains beneath the caldera fill. The resolving power attained in this investigation was possible because we were dealing with large, magnetically distinct lithologic units and a large amount of geological and geophysical data were available constraints to produce the solution.

California↗
USGS2012

Paleomagnetism of welded tuffs of the Yellowstone group

Two of the three ash flow tuffs of the Yellowstone Group are stably magnetized throughout their extent: the Lava Creek tuff (0.60 m.y.) in a normal direction and the Mesa Falls tuff (1.22 m.y.) in a reversed direction. In contrast, much of the Huckleberry Ridge tuff, which was erupted during a polarity transition or field excursion 1.92 m.y. ago and initially magnetized in an intermediate direction ( D = 214.5°, I = −2.2°, and α 95 = 4.1°), has been partially remagnetized in a normal field. Much of the overprint of the Huckleberry Ridge tuff is carried in low‐temperature oxidation products with low coercivities and low blocking temperatures, so that it is commonly removed in peak alternating fields less than 200 Oe or at temperatures less than 400°C. Hematite, having higher coercivities and blocking temperatures, is partly responsible for remagnetization in some specimens, but neither alternating field nor thermal demagnetization enables recovery of the original thermal remanent magnetization in these samples. The chemical overprinting is most pronounced in the devitrified tuff of the flow interior. Stable magnetization is observed in the Huckleberry Ridge tuff in the less porous densely welded portions at the base and boundaries of partial cooling units and in the tuff of the distal margins, where groundwater influences were minimal. Paleomagnetic directions of chilled margins within compound cooling units of the Lava Creek and Huckleberry Ridge tuffs support geological evidence that eruption of each ash flow sheet was rapid and that the source calderas were formed during a short period of time.

Idaho, Montana, Wyoming↗
USGS2012

Geomagnetic paleointensities from radiocarbon‐dated lava flows on Hawaii and the question of the Pacific nondipole low

Radiocarbon ages have been published for nine basaltic lava flows on the island of Hawaii; the ages range from 2600 to somewhat older than 17,900 years B.P. By using the Thelliers' method in vacuum, geomagnetic paleointensity values were obtained from eight of the lavas; the ninth proved unsuitable. The paleointensities for the four youngest flows (2600–4600 years B.P.) yield virtual dipole moments (VDM's) that are 20% greater to more than twice the worldwide values for those times obtained by V. Bucha from archeomagnetic data. The dispersion of virtual geomagnetic poles for the eight lavas is 15.5°, appreciably larger than the average for older lava flows on Hawaii. These results contrast with the historic magnetic field in the region of Hawaii, in which both secular variation and nondipole components are very low. At about 10,000 years B.P. the measured VDM is not very different from the long‐term worldwide average but differs considerably from a smooth extrapolation of Bucha's average curve. At about 18,000 years B.P. the measured VDM is very low and is associated with an unusually shallow paleomagnetic inclination for the latitude of Hawaii. These new paleointensity and paleodirectional data strongly suggest that sizable nondipole geomagnetic fields have existed in the vicinity of Hawaii at various times during the Holocene epoch and perhaps earlier.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Paleomagnetic results from the Lassiter Coast, Antarctica, and a test for oroclinal bending of the Antarctic Peninsula

Paleomagnetic results from 17 magnetically stable units of Upper Cretaceous (‘Andean’) plutons and dikes of the Lassiter Coast, on the southern Antarctic Peninsula, define a mean paleomagnetic pole at 87°S, 131°W (α 95 = 11.5°). This indicates that little latitudinal movement of the southern Antarctic Peninsula has occurred during the past 100 m.y. All magnetically stable intrusives are normally polarized and are believed to have been emplaced during the Late Cretaceous epoch of predominantly normal polarity. There is no evidence of postemplacement remagnetization. The uncertainty in declination at the 95% confidence level is computed for both the Lassiter Coast data and those data available from other Andean sites in the Antarctic Peninsula. Within the limits of uncertainty, data from four localities north of 68°S support the contention of Dalziel et al. (1973) that there has not been any apparent post‐Late‐Cretaceous oroclinal bending in the northern half of the peninsula. For sites to the south in the Lassiter Coast, the uncertainty in declination, due to steep inclinations, is too large to support reliably or deny any large‐scale structural bending.

Antarctic Peninsula, Lassiter Coast↗
USGS2012

Geodimeter measurements of strain during the Southern California Uplift

A review of geodimeter measurements made along the ‘big‐bend’ section of the San Andreas fault in southern California indicates no significant increment in strain during the period of major uplift (late 1959 to mid‐1963). Specifically, no evidence of an increment in compressional strain normal to the San Andreas fault at the time of the uplift was found. Geodolite measurements at four networks along the big bend independently indicate that the strain rate during the 1974–1977 episode of subsidence was essentially a uniaxial north‐south compression at the rate of about ⅓ μstrain/yr. Whether the 1974–1977 rate is significantly different from earlier rates determined by triangulation is not clear owing to a rather large variability in the earlier determinations.

California↗
USGS2012

Revised geomagnetic polarity time scale for the interval 0–5 m.y. B.P.

A change in the constants used in K‐Ar dating and a significant increase in new data have made a recompilation and recomputation of data used to define the Late Cenozoic K‐Ar polarity time scale highly desirable at this time. All available data in the range 0–5 m.y. have been recalculated using the refined constants, with 354 data points in this time interval now meeting the minimum criteria for acceptability. Recalculation of the major polarity epoch boundaries has yielded ages of 0.73 m.y. for the Brunhes‐Matuyama, 2.48 m.y. for the Matuyama‐Gauss, and 3.40 m.y. for the Gauss‐Gilbert boundaries. A revised polarity time scale has been constructed based on available K‐Ar data and information obtained from marine magnetic anomalies and deep‐sea sedimentary cores.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Deformation across the Salton Trough, California, 1973-1977

A trilateration network extending across the San Andreas, San Jacinto, and Elsinore faults in the vicinity of the Salton Sea, California, has been surveyed to very high precision several times in the 5‐year interval 1973–1977. The average strain across the entire network is essentially a uniaxial north‐south contraction at the rate of about 0.3 μstrain/a. There is no substantial strain perpendicular to the Salton trough, indicating no tendency to either open or close that rift. The observed uniaxial north‐south contraction differs from a pure shear parallel to the major faults by a uniform dilatation of about −0.25 μstrain/a that is only partly explained. The shear strain across the network reaches a maximum near the San Jacinto fault and could be explained by right lateral slip at depth on that fault. The displacement pattern also suggests right lateral slip at depth on the San Jacinto fault with total right lateral relative movement near 50 mm/a across the 120‐km breadth of the network. The deformation appears to be uniform in time in the 1973–1977 interval. A dislocation model of the deformation suggests about 50±15 mm/a of relative right lateral slip at depth distributed between the San Andreas, San Jacinto, and Elsinore faults and demonstrates that a significant average dilatation can be generated by pure strike slip on several subparallel faults.

California↗
USGS2012

Geomagnetic paleointensities by the Thelliers' method from submarine pillow basalts: Effects of seafloor weathering

Measurements of geomagnetic paleointensity using the Thelliers' double‐heating method in vacuum have been made on 10 specimens of submarine pillow basalt obtained from 7 fragments dredged from localities 700,000 years old or younger. In the magnetic minerals, the titanium/iron ratio parameter x and the cation deficiency (oxidation) parameter x were determined by X‐ray diffraction and Curie temperature measurement. Fresh material ( z ≅ 0) provided excellent results: most of the natural remanent magnetization (NRM) could be thermally demagnetized before the magnetic minerals became altered, and the NRM‐TRM lines were straight and well constrained, and geologically reasonable paleointensities were obtained. Somewhat oxidized material ( z ≅ 0.2) also provided apparently valid paleointensities: values were similar to those from fresh specimens cut from the same fragments, although only half or less of the NRM could be thermally demagnetized before alteration of the magnetic minerals. More highly oxidized material ( z ≅ 0.6) gave a result seriously in error: the paleointensity value is much too low, because of continuous disproportionation of titanomaghemite during the heating experiments and because seafloor weathering had decreased the NRM intensity. From limited published data, the extent of oxidation of titanomagnetite to cation deficient titanomaghemite in pillow basalt exposed on the seafloor appears to be approximately z = 0.3 at 0.2–0.5 m.y., z = 0.6 at 1 m.y., and z = 0.8–1.0 at 10–100 m.y. This implies that valid paleointensities can be obtained from exposed submarine basalt, but only if the basalt is younger than a few hundred thousand years. Equally good paleointensities were obtained from strongly magnetized (L‐type) basalt and moderately magnetized (L‐type) basalt. The degree of low‐temperature oxidation of cubic iron‐titanium oxides in submarine basalts correlates very well with the diminution of amplitude of linear magnetic anomalies when both are compared as a function of crustal age. Systematic radial variation of Curie temperature is a primary feature of submarine basalt pillows, so that estimation of the oxidation parameter z from the Curie temperature alone by assuming a value for x can be in error. Reasonably precise and self‐consistent values of both x and z can be obtained if both the cubic cell dimension and the Curie temperature of the cubic oxide are measured.

Journal of Geophysical Research B: Solid Earth↗