Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Internal Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77Linked to original sources
USGS1983

Petroleum and mineral resources of Antarctica

No known petroleum or mineral resources occur in Antarctica. The data on these subjects have been collected, mainly since the IGY (International Geophysical Year), 1957-58, as a part of other research carried out by geologists and geophysicists from a number of countries. Specific resource-related studies have not been made. Wright and Williams (1974) summarized what was known of Antarctic mineral resources a decade ago. The U.S. Geological Survey has been actively pursuing various investigations in Antarctica since 194 7. In the course of this work and that of our colleagues elsewhere in the United States and in other countries, much information relevant to petroleum and mineral resources has been obtained. Since 1976, modern state-of-the-art multichannel seismic reflection and aeromagnetic surveys by several countries over the continental margin of Antarctica have indicated thick sedimentary basins. However, no offshore drilling beneath the continental shelf has taken place since the DSDP (Deep Sea Drilling Project) holes in the Ross Sea in 1973. Geologic field investigations begun at the turn of the twentieth century have been intensified in the past two decades; most rock outcrops have been visited and samples collected. Technology to exploit resources, particularly in the Arctic, has been developing at a rapid rate, and much of it could be applied to Antarctica. As a result of the petroleum price increases of the past decade, the attention of a number of countries has turned to Antarctica, but under the policy of "voluntary restraint" adopted by the Antarctic Treaty nations, no active petroleum or mineral exploration is taking place. The Antarctic treaty countries are in the process of negotiating an Antarctic mineral resources regime that is anticipated to be completed within the next several years. Therefore it seemed timely to us to readdress the question of petroleum and mineral resources. These reports review and summarize the available information. The first report summarizes the information relevant to petroleum resources. Although uneconomic at present, petroleum is generally considered more likely to be exploited (if supergiant fields were ever found) in the next few decades than hard minerals. The second report reviews the reported occurrences of minerals in Antarctica and discusses their significance. The final report discusses the Dufek layered mafic intrusion, second only to the Bushveld Complex in size in the world; the Dufek intrusion might be considered as a potential target for mineral exploration.

Circular↗
USGS2021

Managed aquifer recharge suitability—Regional screening and case studies in Jordan and Lebanon

The U.S. Geological Survey, at the request of the U.S. Agency for International Development, led a 5-year regional project to develop and apply methods for water availability and suitability mapping for managed aquifer recharge (MAR) in the Middle East and North Africa region. A regional model of surface runoff for the period from 1984 to 2015 was developed to characterize water availability using remote sensing data on climate, vegetation, and topography in Jordan, Lebanon, and surrounding areas. Surface runoff was accumulated to characterize potential streamflow available for MAR and these data were combined with land surface slope to prepare a regional screening map of MAR suitability, illustrating suitability mapping concepts and methods. The application of the methods is demonstrated by the evaluation of water availability and suitability for potential MAR in study areas in Jordan and Lebanon. Locations suitable for MAR are present in both Jordan and Lebanon, but limitations exist in both countries, related primarily to water availability in Jordan and land areas of suitable terrain in Lebanon. An additional feasibility study including field investigations would likely provide decision makers with essential information for further development of the use of MAR in Jordan, Lebanon, and the region.

Open-File Report↗
USGS2017

Groundwater flux and nutrient loading in the northeast section of Bear Lake, Muskegon County, Michigan, 2015

Bear Lake in North Muskegon, Michigan, is listed as part of the Muskegon Lake area of concern as designated by the U.S. Environmental Protection Agency. This area of concern was designated as a result of eutrophication and beneficial use impairments. On the northeast end of Bear Lake, two man-made retention ponds (Willbrandt Pond East and Willbrandt Pond West), formerly used for celery farming, may contribute nutrients to Bear Lake. Willbrandt Ponds (East and West) were previously muck fields that were actively used for celery farming from the early 1900s until 2002. The restoration and reconnection of the Willbrandt Ponds into Bear Lake prompted concerns of groundwater nutrient loading into Bear Lake. Studies done by the State of Michigan and Grand Valley State University revised initial internal phosphorus load estimates and indicated an imbalance in the phosphorus budget in Bear Lake. From June through November 2015, the U.S. Geological Survey (USGS) did an investigative study to quantify the load of nutrients from shallow groundwater around the Willbrandt Ponds in an effort to update the phosphorus budget to Bear Lake. Seven sampling locations were established, including five shallow groundwater wells and two surface-water sites, in the Willbrandt pond study area and Bear Lake. A total of 12 nutrient samples and discrete water-level measurements were collected from each site from June through November 2015. Continuous water-level data were recorded for both surface-water monitoring locations for the entire sampling period. Water-level data indicated that Willbrandt Pond West had the highest average water-level elevation of all sites monitored, which indicated the general direction of flux is from Willbrandt Pond West to Bear Lake. Nutrient and chloride loading from Willbrandt Pond West to Bear Lake was calculated using two distinct methods: Dupuit and direct seepage methods. Shallow groundwater loading calculations were determined by using groundwater levels to first determine a flux of shallow groundwater, then nutrient concentrations to determine a load. It was determined that Willbrandt Pond East and Willbrandt Pond West contributed between 2 to 4 percent of the total annual phosphorus load to Bear Lake by way of shallow groundwater flow. Annual loads calculated for other constituents include orthophosphate (40–100 pounds per year [lb P/yr]), total nitrogen (200–830 lb/yr), chloride (12,700–32,100 lb/yr), and ammonia (130–670 lb N/yr). Study results indicated that mean groundwater and surface-water nutrient concentrations calculated in this study were higher than reported Michigan statewide values. The data collected in this study allow understanding of groundwater nutrient loading into Bear Lake in an effort to help inform future restoration and management decisions.

Michigan↗
USGS1978

Physiography and surficial geology of the copper-nickel study region, northeastern Minnesota

The Copper-Nickel study region lies in the Superior Upland physiographic province and is located approximately 60 miles north of Duluth and 100 miles southeast of International Falls, Minnesota. It straddles the Laurentian Divide, which separates Hudson Bay and Lake Superior drainage. The topography exhibits a southwesterly trending lineation that parallels the strike of southeastward-dipping bedrock units and the southwestward direction of ice movement during Pleistocene glaciation. For this study, the region has been divided into seven physiographic areas based on geomorphic features related to the bedrock surface, glacial deposits, and hydrogeologic significance. The surficial geology is largely a result of two southwestward advances of the Rainy Lobe of the Laurentian ice sheet. The Toimi Drumlin Field, the oldest glacial deposit, covers much of the southern part of the region. It is bounded on the north by the Vermilion Moraine Complex, an east-west trending series of terminal and recessional moraines that mark the southerly extent of the second advance of the Rainy Lobe. Thin ground moraine and small outwash deposits occur both within and north of the Vermilion Moraine Complex except in the Embarrass and Dunka River basins where outwash deposits up to 200 feet in thickness fill a deep bedrock valley.

Minnesota↗
USGS2013

Hydrology and water quality of Shell Lake, Washburn County, Wisconsin, with special emphasis on the effects of diversion and changes in water level on the water quality of a shallow terminal lake

Shell Lake is a relatively shallow terminal lake (tributaries but no outlets) in northwestern Wisconsin that has experienced approximately 10 feet (ft) of water-level fluctuation over more than 70 years of record and extensive flooding of nearshore areas starting in the early 2000s. The City of Shell Lake (City) received a permit from the Wisconsin Department of Natural Resources in 2002 to divert water from the lake to a nearby river in order to lower water levels and reduce flooding. Previous studies suggested that water-level fluctuations were driven by long-term cycles in precipitation, evaporation, and runoff, although questions about the lake’s connection with the groundwater system remained. The permit required that the City evaluate assumptions about lake/groundwater interactions made in previous studies and evaluate the effects of the water diversion on water levels in Shell Lake and other nearby lakes. Therefore, a cooperative study between the City and U.S. Geological Survey (USGS) was initiated to improve the understanding of the hydrogeology of the area and evaluate potential effects of the diversion on water levels in Shell Lake, the surrounding groundwater system, and nearby lakes. Concerns over deteriorating water quality in the lake, possibly associated with changes in water level, prompted an additional cooperative project between the City and the USGS to evaluate efeffects of changes in nutrient loading associated with changes in water levels on the water quality of Shell Lake. Numerical models were used to evaluate how the hydrology and water quality responded to diversion of water from the lake and historical changes in the watershed. The groundwater-flow model MODFLOW was used to simulate groundwater movement in the area around Shell Lake, including groundwater/surface-water interactions. Simulated results from the MODFLOW model indicate that groundwater flows generally northward in the area around Shell Lake, with flow locally converging toward the lake. Total groundwater inflow to Shell Lake is small (approximately 5 percent of the water budget) compared with water entering the lake from precipitation (83 percent) and surface-water runoff (13 percent). The MODFLOW model also was used to simulate average annual hydrologic conditions from 1949 to 2009, including effects of the removal of 3 billion gallons of water during 2003–5. The maximum decline in simulated average annual water levels for Shell Lake due to the diversion alone was 3.3 ft at the end of the diversion process in 2005. Model simulations also indicate that although water level continued to decline through 2009 in response to local weather patterns (local drought), the effects of the diversion decreased after the diversion ceased; that is, after 4 years of recovery (2006–9), drawdown attributable to the diversion alone decreased by about 0.6 ft because of increased groundwater inflow and decreased lake-water outflow to groundwater caused by the artificially lower lake level. A delayed response in drawdown of less than 0.5 ft was transmitted through the groundwater-flow system to upgradient lakes. This relatively small effect on upgradient lakes is attributed in part to extensive layers of shallow clay that limit lake/groundwater interaction in the area. Data collected in the lake indicated that Shell Lake is polymictic (characterized by frequent deep mixing) and that its productivity is limited by the amount of phosphorus in the lake. The lake was typically classified as oligotrophic-mesotrophic in June, mesotrophic in July, and mesotrophic-eutrophic in August. In polymictic lakes like Shell Lake, phosphorus released from the sediments is not trapped near the bottom of the lake but is intermittently released to the shallow water, resulting in deteriorating water quality as summer progresses. Because the productivity of Shell Lake is limited by phosphorus, the sources of phosphorus to the lake were quantified, and the response in water quality to changes in phosphorus inputs were evaluated by means of eutrophication models. During 2009, the total input of phosphorus to Shell Lake was 1,730 pounds (lb), of which 1,320 lb came from external sources (76 percent) and 414 lb came from internal loading from sediments in the lake (24 percent). The largest external source was from surface-water runoff, which delivered about 52 percent of the total phosphorus load compared with about 13 percent of the water input. The second largest source was from precipitation (wetfall and dryfall), which delivered 19 percent of the load compared to about 83 percent of the water input. Contributions from septic systems and groundwater accounted for about 3 and 2 percent, respectively. Increased runoff raises water levels in the lake but does not necessarily increase phosphorus loading because phosphorus concentrations in the tributaries decline during increased flow, possibly because of shorter retention times in upstream wetlands. Phosphorus loading to the lake in 2009 represented what occurred after a series of dry years; therefore, this information was combined with data from 2011, a wet year, to estimate phosphorus loading during a range of hydrologic conditions by estimating loading from each component of the phosphorus budget for each year from 1949 to 2011. Comparisons of historical water-quality records with historical water levels and applications of a hydrodynamic model (Dynamic Lake Model, DLM) and empirical eutrophication models were used to understand how changes in water level and the coinciding changes in phosphorus loading affect the water quality of Shell Lake. DLM simulations indicate that large changes in water level (approximately 10 ft) affect the persistence of stratification in the lake. During periods with low water levels, the lake is a well-mixed, polymictic system, with water quality degrading slightly as summer progresses. During periods with high water levels, the lake is more stratified, and phosphorus from internal loading is trapped in the hypolimnion and released later in summer, which results in more extreme seasonality in water quality and better clarity in early summer. Results of eutrophication model simulations using a range in external phosphorus inputs illustrate how water quality in Shell Lake (phosphorus and chlorophyll a concentrations and Secchi depths) responds to changes in external phosphorus loading. Results indicate that a 50-percent reduction in external loading from that measured in 2009 would be required to change phosphorus concentrations from 0.018 milligram per liter (mg/L) (measured in 2009) to 0.012 mg/L (estimated for the mid-1800s from analysis of diatoms in sediment cores). Such reductions in phosphorus loading cannot be accomplished by targeting septic systems or internal loading alone because septic systems contribute only about 3 percent of the phosphorus input to the lake, and internal loading from the sediments of Shell Lake contributes only about 25 percent of phosphorus input. Complete elimination of phosphorus from septic systems and internal loading would decrease the phosphorus concentrations in the lake by 0.003–0.004 mg/L. Therefore, reducing phosphorus concentration in the lake more than by 0.004 mg/L requires decreasing phosphorus loading from surface-water contributions, primarily runoff to the lake. Reconstructed changes in water quality from 1860 to 2010, based on changes in the diatom communities archived in the sediments and eutrophication model simulations, suggest that anthropogenic changes in the watershed (sawmill construction in 1881; the establishment of the village of Shell Lake; and land-use changes in the 1920s, including increased agriculture) had a much larger effect on water quality than the natural changes associated with fluctuations in water level. Although the effects of natural changes in water level on water quality appear to be small, changes in water level do have a modest effect on water quality, primarily manifested as small improvements during higher water levels. Fluctuations in water level, however, have a larger effect on the seasonality of water-quality patterns, with better water quality, especially increased Secchi depths, in early summer during years with high water levels.

Wisconsin↗
USGS2014

The offshore benthic fish community

Lake Ontario’s offshore benthic fish community includes primarily slimy sculpin, lake whitefish, rainbow smelt, lake trout, burbot, and sea lamprey. Of these, lake trout have been the focus of an international restoration effort for more than three decades (Elrod et al. 1995; Lantry and Lantry 2008). The deepwater sculpin and three species of deepwater ciscoes (Coregonus spp.) that were historically important in the offshore benthic zone became rare or were extirpated by the 1960s (Christie 1973; Owens et al. 2003; Lantry et al. 2007b; Roth et al. 2013). Ecosystem changes continue to influence the offshore benthic fish community, including the effects of dreissenid mussels, the near disappearance of burrowing amphipods (Diporeia spp.) (Dermott et al. 2005; Watkins et al. 2007), and the increased abundance and expanded geographic distribution of round goby (see Nearshore Fish Community chapter) (Lantry et al. 2007b). The fish-community objectives for the offshore benthic fish community, as described by Stewart et al. (1999), are: The offshore benthic fish community will be composed of self-sustaining native fishes characterized by lake trout as the top predator, a population expansion of lake whitefish from northeastern waters to other areas of the lake, and rehabilitated native prey fishes.

New York↗
USGS2018

Inland waters

1. The total flux of carbon—which includes gaseous emissions, lateral flux, and burial—from inland waters across the conterminous United States (CONUS) and Alaska is 193 teragrams of carbon (Tg C) per year. The dominant pathway for carbon movement out of inland waters is the emission of carbon dioxide gas across water surfaces of streams, rivers, and lakes (110.1 Tg C per year), a flux not identified in the First State of the Carbon Cycle Report (SOCCR1; CCSP 2007). Second to gaseous emissions are the lateral fluxes of carbon through rivers to coastal environments (59.8 Tg C per year). Total carbon burial in lakes and reservoirs represents the smallest flux for CONUS and Alaska (22.5 Tg C per year) (medium confidence). 2. Based on estimates presented herein, the carbon flux from inland waters is now understood to be four times larger than estimates presented in SOCCR1. The total flux of carbon from inland waters across North America is estimated to be 507 Tg C per year based on a modeling approach that integrates high-resolution U.S. data and continental-scale estimates of water area, discharge, and carbon emissions. This estimate represents a weighted average of 24 grams of carbon per m2 per year of continental area exported and removed through inland waters in North America (low confidence). 3. Future research can address critical knowledge gaps and uncertainties related to inland water carbon fluxes. This chapter, for example, does not include methane emissions, which cannot be calculated as precisely as other carbon fluxes because of significant data gaps. Key to reducing uncertainties in estimated carbon fluxes is increased temporal resolution of carbon concentration and discharge sampling to provide better representations of storms and other extreme events for estimates of total inland water carbon fluxes. Improved spatial resolution of sampling also could potentially highlight anthropogenic influences on the quantity and quality of carbon fluxes in inland waters and provide information for land-use planning and management of water resources. Finally, uncertainties could likely be reduced if the community of scientists working in inland waters establishes and adopts standard measurement techniques and protocols similar to those maintained through collaborative efforts of the International Ocean Carbon Coordination Project and relevant governmental agencies from participating nations.

Book chapter↗
USGS2025

Confocal laser-scanning microscopy (CLSM)-based thermal maturity of Tasmanites and progress in standardization of fluorescence microspectrometry

Evaluation of thermal maturity in vitrinite-free or vitrinite-deficient sediments via fluorescence microspectrometry can provide relevant information related to petroleum exploration and thermal history assessment. However, variation in spectral fluorescence properties of alginite macerals with increasing thermal maturity is largely underexplored. Here, authors of this study have applied confocal laser-scanning microscopy (CLSM) in conjunction with fluorescence microspectrometry to a maturity series of marine Upper Devonian Tasmanites algae from the Ohio Shale (Huron Member) and a single sample from the Marcellus Formation of the Appalachian Basin. Spectral fluorescence properties of Tasmanites were evaluated in relation to orientation, measurement location, and the number of measurements per sample, and were compared to published literature. Emission spectra of Tasmanites from continuous wave laser excitation (405 nm) were acquired from sections perpendicular and parallel to bedding and at different positions within individual Tasmanites bodies. The results showed a progressive red-shift in emission maxima (λ max ) in a large sample sized maturity series ( N = 19), e.g., 493 to 578 nm for the perpendicular section at middle position. Further, blue-shifted apex and mineral-adjacent positions within sections perpendicular to bedding were observed, with the latter being reported here for the first time. While blue-shift at apex positions can be attributed to mechanical deformation-induced reorientation of photoselected fluorophores, the blue-shifted mineral-adjacent positions could result from strain loading and development of a plastic deformation region at the mineral contact zone with Tasmanites . A decrease in standard deviation with increasing number of measured emission maxima is well-observed, and 15 to 20 individual measurements per sample appears sufficient for low standard deviation and coefficient of variance. CLSM-derived thermal maturity parameters indicated that a moderate positive correlation of red/green quotient (Q 650/500 ; R 2 = 0.67) with solid bitumen reflectance (BR o in %) exists. For reproducible results, the determination of λ max and Q 650/500 should be conducted exclusively in the middle position at perpendicular and parallel sections of the polished whole-rock pellets, where the lowest standard deviation in measurement was observed. These results strengthen the suitability and relevance of the CLSM technique in thermal maturity studies of dispersed organic matter (DOM) and contribute to the standardization of fluorescence microspectrometry methods in organic petrology investigation.

Kentucky, Ohio, Virginia, West Virginia↗
USGS2011

Deposit model for volcanogenic uranium deposits

Volcanism is a major contributor to the formation of important uranium deposits both close to centers of eruption and more distal as a result of deposition of ash with leachable uranium. Hydrothermal fluids that are driven by magmatic heat proximal to some volcanic centers directly form some deposits. These fluids leach uranium from U-bearing silicic volcanic rocks and concentrate it at sites of deposition within veins, stockworks, breccias, volcaniclastic rocks, and lacustrine caldera sediments. The volcanogenic uranium deposit model presented here summarizes attributes of those deposits and follows the focus of the International Atomic Energy Agency caldera-hosted uranium deposit model. Although inferred by some to have a volcanic component to their origin, iron oxide-copper-gold deposits with economically recoverable uranium contents are not considered in this model. The International Atomic Energy Agency's tabulation of volcanogenic uranium deposits lists 100 deposits in 20 countries, with major deposits in Russia, Mongolia, and China. Collectively these deposits are estimated to contain uranium resources of approximately 500,000 tons of uranium, which amounts to 6 percent of the known global resources. Prior to the 1990s, these deposits were considered to be small (less than 10,000 tons of uranium) with relatively low to moderate grades (0.05 to 0.2 weight percent of uranium). Recent availability of information on volcanogenic uranium deposits in Asia highlighted the large resource potential of this deposit type. For example, the Streltsovskoye district in eastern Russia produced more than 100,000 tons of uranium as of 2005; with equivalent resources remaining. Known volcanogenic uranium deposits within the United States are located in Idaho, Nevada, Oregon, and Utah. These deposits produced an estimated total of 800 tons of uranium during mining from the 1950s through the 1970s and have known resources of 30,000 tons of uranium. The most recent estimate of speculative resources proposed an endowment of 200,000 tons of uranium.

Open-File Report↗
USGS2008

The Gogebic Iron Range — A sample of the northern margin of the Penokean fold and thrust belt

The Gogebic iron range is an elongate belt of Paleoproterozoic strata extending from the west shore of Lake Gogebic in the upper peninsula of Michigan for about 125 km westward into northern Wisconsin. It is one of six major informally named iron ranges in the Lake Superior region and produced about 325 million tons of direct-shipping ore between 1887 and 1967. A significant resource of concentrating-grade ore remains in the western and eastern parts of the range. The iron range forms a broad, gently southward-opening arc where the central part of the range exposes rocks that were deposited somewhat north of the eastern and western parts. A fundamental boundary marking both the tectonic setting of deposition and the later deformation within the Penokean orogen lies fortuitously in an east-west direction along the range so that the central part of the range preserves sediments deposited north of that boundary, whereas the eastern and western parts of the range were deposited south of the boundary. Thus, the central part of the range provides a record of sedimentation and very mild deformation in a part of the Penokean orogen farthest from the interior of the orogen to the south. The eastern and western parts of the range, in contrast, exhibit a depositional and deformational style typical of parts closer to the interior of the orogen. A second fortuitous feature of the iron range is that the entire area was tilted from 40° to 90° northward by Mesoproterozoic deformation so that the map view offers an oblique cross section of the Paleoproterozoic sedimentary sequence and structures. Together, these features make the Gogebic iron range a unique area in which to observe (1) the lateral transition from deposition on a stable platform to deposition in a tectonically and volcanically active region, and (2) the transition from essentially undeformed Paleoproterozoic strata to their folded and faulted equivalents. Paleoproterozoic strata in the Gogebic iron range are part of the Marquette Range Supergroup. They were deposited unconformably on Neoarchean rocks consisting of a diverse volcanic suite (the Ramsay Formation) which was intruded by granitic rocks of the Puritan Quartz Monzonite. The Marquette Range Supergroup in this region consists of a basal sequence of orthoquartzite (Sunday Quartzite) and dolomite (Bad River Dolomite), both of which are part of the Chocolay Group. The group is preserved only in the eastern and western parts of the range but was probably present throughout before the erosion interval that separated it from the overlying Menominee Group. The Menominee Group consists of basal clastic rocks (Palms Formation) that grade upward into the Ironwood Iron-Formation, which is the principal iron-bearing unit of the range. The Ironwood interfingers with the Emperor Volcanic Complex in the eastern part of the range and with volcanic rocks and gabbro in the western part of the range. The Ironwood is overlain unconformably by the Tyler Formation in the central and western parts of the range and by the Tyler’s equivalent, the Copps Formation, in the eastern part of the range. Strata in the central part of the iron range are entirely sedimentary. Deposition occurred in a relatively stable tectonic setting, at least until the deposition of the Tyler Formation. The Tyler consists largely of turbidites deposited in a foreland basin in advance of accreting volcanic arcs to the south. Penokean deformation in the central part of the range was very minor; the evidence of deformation consists of steep faults with small offsets and a few bedding-parallel faults that also have small offsets and that are recognized only in mine workings. In both the eastern and western parts of the iron range, abrupt facies changes mark a passage into a more tectonically and volcanically active belt. These relationships are especially well displayed in the east where a graben, the Presque Isle trough, began to subside during deposition of the Ironwood Iron-Formation. The thickness of the Ironwood increases into the graben and its internal stratigraphy also changes. The most prominent changes in the graben are the presence of a thick volcanic unit, the Emperor Volcanic Complex of the Menominee Group, and comagmatic gabbro sills that interfinger with the Ironwood. In the western part of the range, volcanic rocks and comagmatic gabbro sills are also present in the Ironwood, but a graben that is equivalent to the Presque Isle trough is not evident. Penokean structures are well developed in both the eastern and western parts of the iron range. They consist of folds ranging from outcrop to regional scale and thrust faults which, in places, either repeated the section or detached it from Neoarchean basement. The sharp transition from the little-deformed central part of the range to the more intensely deformed eastern and western parts coincides closely with the earlier developed transition from the stable sedimentary setting in the central part to the tectonically active sedimentation in the east and west parts. The extensional structures that formed during sedimentation may have helped to control the extent of later Penokean compressional structures.

Michigan, Wisconsin↗
USGS1976

Soil moisture in the Black River Basin, New York, during 1972-73: International Field Year for the Great Lakes (IFYGL)

Soil-moisture data were collected and analyzed to provide an estimate of the quantity of water in temporary storage in the Black River Basin, New York, during the International Field Year for the Great Lakes (IFYGL) (April 1, 1972 to March 31, 1973). A portable neutron logger was used to record monthly soil-moisture profiles in the unsaturated zone at 11 sites in the basin. Moisture content, computed in inches of depth over the basin, ranged from 51.41 inches in April to 37.62 inches in August. Thickness of the unsaturated zone was greatest in April and was least in June. The observed absence of a pulse, or wave, of moisture moving down through the soil at most sites may be due to the infrequency of measurements, the location of sites in sandy, well-drained areas, and a relatively constant source of moisture (precipitation) at the surface. The study does not indicate a strong correlation between volume of snowmelt and soil-moisture; this may be due to the high porosity and permeability of soil material at the observation sites. Although nine pairs of monthly basin runoff and soil-moisture content data during IFYGL has a linear correlation coefficient of 0.82, too few data are available to develop a statistical relationship. (Woodard-USGS)

Open-File Report↗
USGS1979

Mesozoic stratigraphy: the key to tectonic analysis of southern and central Alaska

Southern and central Alaska constitutes an enormous tectonic mosaic composed of separate structural blocks and fragments that accreted to North America during Mesozoic and early Cenozoic time. Some of these blocks are far traveled, as shown by paleomagnetic and paleontologic studies. More than 25 discrete tectonostratigraphic terranes now are known, each of which exhibits a characteristic internal stratigraphic sequence that differs markedly from that of neighboring terranes. Lower Mesozoic rocks, which are widely distributed in these terranes, provide the most complete information for analyzing regional depositional and structural patterns. Sedimentary and volcanic facies of this age include: nonmarine red beds with minor intercalated basalt flows; extensive subaerial plateau basalt flows; shallow marine sandstone, conglomerate, and siltstone; inner to outer platform carbonate rocks; deep-water limestone, chert, cherty crystal tuff, and argillite; pillow basalt with associated deep-water volcaniclastic sedimentary rocks; and andesitic flows, tuffs, and volcanoclastic rocks with marine fossils. No systematic depositional patterns are perceived that indicate that these contrasting facies were deposited in their present structural positions; instead, large-scale tectonic juxtaposition is required. The dominant structures produced during accretion were thrust faults that were modified by concurrent and later strike-slip faults. Some terranes may be enormous nappes, but much more detailed stratigraphic and structural studies are needed, with emphasis on the age and stratigraphy of deep-water siliceous and carbonate rocks, before the complex history of deposition and subsequent accretion can be adequately elucidated.

Alaska↗
USGS2019

Monitoring live vegetation in semiarid and arid rangeland environments with satellite remote sensing in northern Kenya

As part of the U.S. Department of the Interior’s (DOI) commitment to provide technical assistance to the Kenyan Northern Rangelands Trust (NRT), the U.S. Geological Survey, in collaboration with the DOI International Technical Assistance Program and the U.S. Agency for International Development’s regional mission in East Africa, created a high spatial and time-sensitive live vegetation monitoring system for NRT. The system built with advanced field and sensor technologies produced directly calibrated and highly accurate satellite mapping that is extendable both forward and backward in time. The maps are produced in a simple 0–100-percent representation of live vegetation status and change over time. The backbone of the mapping is the Sentinel satellite remote sensing systems with 5-day collection frequencies and ground spatial resolutions of 10 meters. The European Space Agency (ESA) offers free Sentinel satellite image data through conveniently accessed websites and free user-friendly image processing software downloadable directly onto a personal workstation. ESA provides free online software support. The mapping capability was extended from the forward mapping of Sentinel back in time with the Landsat satellite remote sensing system that has an available and free data archive back to 1983. Although Landsat has coarser spatial resolution, the Landsat to Sentinel live vegetation mapping comparison supports the use of Landsat to provide NRT the historical recreation of prominent live vegetation changes.

Open-File Report↗
USGS2007

Short Course Introduction to Quantitative Mineral Resource Assessments

This is an abbreviated text supplementing the content of three sets of slides used in a short course that has been presented by the author at several workshops. The slides should be viewed in the order of (1) Introduction and models, (2) Delineation and estimation, and (3) Combining estimates and summary. References cited in the slides are listed at the end of this text. The purpose of the three-part form of mineral resource assessments discussed in the accompanying slides is to make unbiased quantitative assessments in a format needed in decision-support systems so that consequences of alternative courses of action can be examined. The three-part form of mineral resource assessments was developed to assist policy makers evaluate the consequences of alternative courses of action with respect to land use and mineral-resource development. The audience for three-part assessments is a governmental or industrial policy maker, a manager of exploration, a planner of regional development, or similar decision-maker. Some of the tools and models presented here will be useful for selection of exploration sites, but that is a side benefit, not the goal. To provide unbiased information, we recommend the three-part form of mineral resource assessments where general locations of undiscovered deposits are delineated from a deposit type's geologic setting, frequency distributions of tonnages and grades of well-explored deposits serve as models of grades and tonnages of undiscovered deposits, and number of undiscovered deposits are estimated probabilistically by type. The internally consistent descriptive, grade and tonnage, deposit density, and economic models used in the design of the three-part form of assessments reduce the chances of biased estimates of the undiscovered resources. What and why quantitative resource assessments: The kind of assessment recommended here is founded in decision analysis in order to provide a framework for making decisions concerning mineral resources under conditions of uncertainty. What this means is that we start with the question of what kinds of questions is the decision maker trying to resolve and what forms of information would aid in resolving these questions. Some applications of mineral resource assessments: To plan and guide exploration programs, to assist in land use planning, to plan the location of infrastructure, to estimate mineral endowment, and to identify deposits that present special environmental challenges. Why not just rank prospects / areas? Need for financial analysis, need for comparison with other land uses, need for comparison with distant tracts of land, need to know how uncertain the estimates are, need for consideration of economic and environmental consequences of possible development. Our goal is to provide unbiased information useful to decision-makers.

Open-File Report↗
USGS2023

An interoperability strategy for the next generation of SEEA accounting

The System of Environmental-Economic Accounting (SEEA) is a set of international environmental-economic standards, adopted by the UN Statistical Commission in 2012 (SEEA Central Framework) and 2021 (SEEA Ecosystem Accounting); the latter in particular requires the integration of large and diverse data streams. These include geospatial and other data sources, which have proven challenging for some National Statistical Offices (NSOs) to implement. Although a variety of ecosystem service modelling platforms have been built over the last 15 years to meet various user demands, they often duplicate efforts, rely on data that are siloed, and rarely effectively reuse the knowledge gained from past modelling efforts. By making the data and models that underlie SEEA interoperable, NSOs and the scientific community can advance the accessibility, speed, quality, and transparency of SEEA accounts by making it possible to rapidly integrate and share new scientific data and models. Doing so requires an understanding of the benefits of interoperability, the costs of the status quo, and concrete pathways toward community-endorsed approaches for interoperability. The ARIES Network, which powers the ARIES for SEEA Explorer web application, offers such a path toward interoperability, providing substantial benefits to NSOs and scientific and policy communities.

Report↗
USGS2018

Modeling the distributions of tegu lizards in native and potential invasive ranges

Invasive reptilian predators can have substantial impacts on native species and ecosystems. Tegu lizards are widely distributed in South America east of the Andes, and are popular in the international live animal trade. Two species are established in Florida (U.S.A.) - Salvator merianae (Argentine black and white tegu) and Tupinambis teguixin sensu lato (gold tegu) – and a third has been recorded there— S. rufescens (red tegu). We built species distribution models (SDMs) using 5 approaches (logistic regression, multivariate adaptive regression splines, boosted regression trees, random forest, and maximum entropy) based on data from the native ranges. We then projected these models to North America to develop hypotheses for potential tegu distributions. Our results suggest that much of the southern United States and northern México probably contains suitable habitat for one or more of these tegu species. Salvator rufescens had higher habitat suitability in semi-arid areas, whereas S. merianae and T. teguixin had higher habitat suitability in more mesic areas. We propose that Florida is not the only state where these taxa could become established, and that early detection and rapid response programs targeting tegu lizards in potentially suitable habitat elsewhere in North America could help prevent establishment and abate negative impacts on native ecosystems.

Scientific Reports↗
USGS1983

Pressure core barrel; application to the study of gas hydrates, Deep Sea Drilling Project Site 533, Leg 76

A pressure core barrel (PCB), developed by the Deep Sea Drilling Project, was used successfully to recover, at in situ pressure, sediments of the Blake Outer Ridge, offshore the southeastern United States. The PCB is a unique, wire-line tool, 10.4 m long, capable of recovering 5.8 m of core (5.8 cm in diameter), maintained at or below in situ pressures of 34.4 million Pascals (MPa), and 1.8 m of unpressurized core (5.8 cm in diameter). All excess internal pressure above the operating pressure of 34.4 MPa is automatically vented off as the barrel is retrieved. The PCB was deployed five times at DSDP Site 533 where geophysical evidence suggests the presence of gas hydrates in the upper 600 m of sediment. Three cores were obtained holding average in situ pressures of 30 MPa. Two other cores did not maintain in situ pressures. Three of the five cores were intermittently degassed at varying intervals of time, and portions of the vented gas were collected for analysis. Pressure decline followed paths indicative of gas hydrates and/or dissolved gas. The released gas was dominantly methane (usually greater than 90%), along with higher molecular-weight hydrocarbon gases and carbon dioxide. During degassing the ratio of methane to ethane did not vary significantly. On the other hand, concentrations of higher molecular-weight hydrocarbon gases increased, as did carbon dioxide concentrations. The results from the PCB experiments provide tentative but equivocal evidence for the presence of .gas hydrates at Site 533. The amount of gas hydrate indicated is small. Nevertheless, this work represents the first successful study of marine gas hydrates utilizing the PCB.

Initial Reports of the D.S.D.P.↗
USGS2011

Geologic assessment of undiscovered hydrocarbon resources of the Western Oregon and Washington Province

The purpose of the U.S. Geological Survey (USGS) National Oil and Gas Assessment is to develop geology-based hypotheses regarding the potential for additions to oil and gas reserves in priority areas of the United States, focusing on the distribution, quantity, and availability of oil and natural gas resources. The USGS has completed an assessment of the undiscovered, technically recoverable oil and gas resources in western Oregon and Washington (USGS Western Oregon and Washington Province 5004). The province includes all of Oregon and Washington north of the Klamath Mountains and west of the crest of the Cascade Range, and extends offshore to the 3-mi limit of State waters on the west and to the International Boundary in the Straits of Juan de Fuca and Canada on the north. It measures about 450 mi north-south and 50 to 160 mi east-west, encompassing more than 51,000 mi2. The assessment of the Western Oregon and Washington Province is geology based and used the total petroleum system (TPS) concept. The geologic elements of a TPS include hydrocarbon source rocks (source rock maturation and hydrocarbon generation and migration), reservoir rocks (quality and distribution), and traps for hydrocarbon accumulation. Using these geologic criteria, two conventional and one unconventional (continuous) total petroleum systems were defined, with one assessment unit (AU) in each TPS: (1) the Cretaceous-Tertiary Composite TPS and the Western Oregon and Washington Conventional Gas AU, (2) the Tertiary Marine TPS and the Tertiary-Marine Gas AU, and (3) the Tertiary Coalbed Gas TPS and the Eocene Coalbed Gas AU, in which a cell-based methodology was used to estimate coalbed-gas resources.

Data Series↗