Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geologic Quadrangle”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77Linked to original sources
USGS1994

Geologic map of the MTM -85080 quadrangle (revised), Planum Australe region of Mars

Published geologic maps of south polar region of Mars have been based on either Mariner 9 (Condit Soderblom, 1978; Scott and Carr, 1978) or Viking Orbiter (Tanaka and Scott, 1987) images. The mapped extent of the southern layered deposits differs in many places on these maps and on our maps. These differences reflect the difficulty in accurately determining the location of the contact between the layered deposits and subjacent units. The polar layered deposit gradually thin toward their margin in many places, and the smooth surface features that characterize the layered deposits are also found on other sedimentary blankets in the south polar region (Murray and others, 1972; Sharp, 1973). Previous workers have also reached different conclusions regarding the origin of the lower member of the Dorsa Argentea Formation, which was named by Tanaka and Scott (1987) and interpreted by them as volcanic in origin (based on observation of flow fronts in areas far outside this quadrangle). The lower member, previously called pitted material, and other sedimentary, and other sedimentary units were recognized in Mariner 9 images and described by Murray and others (1972), Sharp (1973), and Cutts (1973b). Sharp (1973) argued for exhumation of pits by wind, perhaps aided by sublimation of volatiles. He concluded that the massive pitted sediments of the lower member unconformably overlie older massive units. We have mapped one of these older units ridged and knobby material. Condit and Soderblom (1978) found some layered deposits within pits, which indicates that erosion of the pits was completed before accumulation of the layered deposits commenced. Howard’s (1981) suggestion that the pits may be formed by basal melting of ground ice is consistent with either a volcanic or sedimentary origin for the lower (pitted) member. Plaut and others (1988) mapped the extent of the pitted material and found that it overlies volcanic plains wherever the contact is visible. They concluded that the pitted material is no more than 1 km thick and is about 3.3 billion years old (Late Hesperian).

IMAP↗
USGS2003

Surficial and bedrock geologic map database of the Kelso 7.5 Minute quadrangle, San Bernardino County, California

This geologic map database describes geologic materials for the Kelso 7.5 Minute Quadrangle, San Bernardino County, California. The area lies in eastern Mojave Desert of California, within the Mojave National Preserve (a unit of the National Parks system). Geologic deposits in the area consist of Proterozoic metamorphic rocks, Cambrian-Neoproterozoic sedimentary rocks, Mesozoic plutonic and hypabyssal rocks, Tertiary basin fill, and Quaternary surficial deposits. Bedrock deposits are described by composition, texture, and stratigraphic relationships. Quaternary surficial deposits are classified into soil-geomorphic surfaces based on soil characteristics, inset relationships, and geomorphic expression. The surficial geology presented in this report is especially useful to understand, and extrapolate, physical properties that influence surface conditions, and surface- and soil-water dynamics. Physical characteristics such as pavement development, soil horizonation, and hydraulic characteristics have shown to be some of the primary drivers of ecologic dynamics, including recovery of those ecosystems to anthropogenic disturbance, in the eastern Mojave Desert and other arid and semi-arid environments.

California↗
USGS2001

Spatial digital database for the geologic map of the east part of the Pullman 1° x 2° quadrangle, Idaho

The paper geologic map of the east part of the Pullman 1° x 2° degree quadrangle, Idaho (Rember and Bennett, 1979) was scanned and initially attributed by Optronics Specialty Co., Inc. (Northridge, CA) and remitted to the U.S. Geological Survey for further attribution and publication of the geospatial digital files. The resulting digital geologic map GIS can be queried in many ways to produce a variety of geologic maps. This digital geospatial database is one of many being created by the U.S. Geological Survey as an ongoing effort to provide geologic information in a geographic information system (GIS) for use in spatial analysis. Digital base map data files (topography, roads, towns, rivers and lakes, and others.) are not included: they may be obtained from a variety of commercial and government sources. This database is not meant to be used or displayed at any scale larger than 1:250,000 (for example, 1:100,000 or 1:24,000). The digital geologic map graphics and plot files (pull250k.gra/.hp /.eps) that are provided in the digital package are representations of the digital database.

Idaho↗
USGS2022

Bedrock geologic map of the Crown Point quadrangle, Essex County, New York, and Addison County, Vermont

The bedrock geology of the 7.5-minute Crown Point quadrangle consists of deformed and metamorphosed Mesoproterozoic gneisses of the Adirondack Highlands unconformably overlain by weakly deformed lower Paleozoic sedimentary rocks of the Champlain Valley. The Mesoproterozoic rocks occur on the eastern edge of the Adirondack Highlands and represent an extension of the Grenville Province of Laurentia. Granulite facies Mesoproterozoic paragneiss, marble, and amphibolite hosted the emplacement of granitic orthogneiss at approximately 1.18–1.15 giga-annum (Ga, billion years before present). The earliest of four phases of deformation (D1) is characterized by gneissosity, rarely preserved F1 isoclinal folds, and migmatite in the host rocks. Subsequent D2 deformation produced a composite penetrative gneissosity, migmatite, and isoclinal F2 folds. Towards the end of D2, felsic magmatism (including the regionally extensive Lyon Mountain Granite Gneiss, abbreviated “LMG”) spread by penetrative migration as semiconcordant alkali feldspar granite sheets subparallel to S2 into previously deformed lithologies. The LMG crystallized at approximately 1.15 Ga and displays synkinematic F2 folds thus constraining the time of D2 deformation. Exhumation during D3 produced F3 folds exhibited in regional domes and basins, such as the Keeney Mountain synform, local reactivation of the S2 foliation, partial melting, metamorphism, metasomatism, iron ore remobilization, and intrusion of magnetite-bearing pegmatite both as layer-parallel sills and crosscutting dikes. D4 created NE- and NW-trending boudinage, local high-grade ductile shear zones, and crosscutting granitic pegmatite dikes. Kilometer (km)-scale lineaments readily observed in lidar data are Ediacaran mafic dikes and Phanerozoic brittle faults. The Paleozoic rocks are part of the Early Cambrian to Late Ordovician great American carbonate bank on the ancient margin of Laurentia. Cambrian-Ordovician stratigraphy records an approximately 1-km-thick section and a transition from synrift clastics to passive margin peritidal carbonate buildups to gradually deeper water subtidal to shelf carbonates during foreland basin development associated with the Taconic orogeny. The Paleozoic rocks are weakly folded and block faulted. Large areas of the Champlain Valley are covered by undifferentiated glacial deposits, some of which contain mapped landslides. The map also shows waste rock piles and tailings from historical mining operations and large areas of artificial fill. This study was undertaken to improve our understanding of the bedrock geology in the Adirondack Highlands, establish a modern framework for 1:24,000-scale bedrock geologic mapping in the Adirondacks, provide a context for historical iron mines in the eastern Adirondacks, and update the stratigraphy of the Champlain Valley in New York and Vermont. This Scientific Investigations Map of the Crown Point 7.5-minute quadrangle consists of a map sheet, an explanatory pamphlet, and a geographic information system database that includes bedrock geologic units, faults, outcrops, and structural geologic information. The map sheet includes a bedrock geologic map, a correlation of map units, a description of map units, an explanation of map symbols, three cross sections, and a simplified surficial geologic map that includes lidar percent slope. The explanatory pamphlet includes a discussion of the geology. The bedrock geologic map on the map sheet is multi-layered and has been designed to enable the user to turn off the surficial map layer to view the concealed bedrock map units.

New York, Vermont↗
USGS1981

Surficial geology of part of Westdale quadrangle, Oswego County, New York

The location and extent of seven kinds of surficial deposits in part of Westdale quadrangle, Oswego County, N.Y., are mapped on a 7.5-minute U.S. Geological Survey topographic map. The map was compiled to indicate the lithology and potential for groundwater development at any specific location.

New York↗
USGS1972

Geologic map of the Clavius Quadrangle of the Moon

The Clavius quadrangle is in the southern lunar highlands about 500 km south of the Mare Nubium and 150 km south of the large young crater Tycho. This part of the M oon is characterized by densely cratered topography and the absence of mare materials. Geologic units in the quadrangle cannot be directly correlated with those in the vicinity of Mare Imbrium , 2500 km to the north, which define most of the lunar time-stratigraphic systems (Shoemaker and Hackman, 1962 ; Wilhelms , 1970). However, the relative ages of rock units, including crater materials, have been determined by established geologic methods, such as superposition and cross-cutting relations. In addition, crater materials have been positioned within the lunar time stratigraphic framework ( Offield , 1971) by estimates. Based on morphology, of their state of erosion ( Pohn and Offi e ld , 1970).

IMAP↗