Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Hydrologic Unit”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76Linked to original sources

Post-fire, rainfall intensity-peak discharge relations for three mountainous watersheds in the Western USA

Wildfire alters the hydrologic response of watersheds, including the peak discharges resulting from subsequent rainfall. Improving predictions of the magnitude of flooding that follows wildfire is needed because of the increase in human population at risk in the wildland-urban interface. Because this wildland-urban interface is typically in mountainous terrain, we investigated rainfall-runoff relations by measuring the maximum 30 min rainfall intensity and the unit-area peak discharge (peak discharge divided by the area burned) in three mountainous watersheds (17-26.8 km 2 ) after a wildfire. We found rainfall-runoff relations that relate the unit-area peak discharges to the maximum 30 min rainfall intensities by a power law. These rainfall-runoff relations appear to have a threshold value for the maximum 30 min rainfall intensity (around 10 mm h -1 ) such that, above this threshold, the magnitude of the flood peaks increases more rapidly with increases in intensity. This rainfall intensity could be used to set threshold limits in rain gauges that are part of an early-warning flood system after wildfire. The maximum unit-area peak discharges from these three burned watersheds ranged from 3.2 to 50 m 3 s -1 km -2 . These values could provide initial estimates of the upper limits of runoff that can be used to predict floods after wildfires in mountainous terrain. Published in 2001 by John Wiley and Sons, Ltd.

Hydrological Processes↗

Geographic trend in mercury measured in common loon feathers and blood

The common loon ( Gavia immer ) is a high‐trophic‐level, long‐lived, obligate piscivore at risk from elevated levels of Hg through biomagnification and bioaccumulation. From 1991 to 1996 feather ( n = 455) and blood ( n = 381) samples from adult loons were collected between June and September in five regions of North America: Alaska, northwestern United States, Upper Great Lakes, New England, and the Canadian Maritimes. Concentrations of Hg in adults ranged from 2.8 to 36.7 μg/g (fresh weight) in feathers and from 0.12 to 7.80 μg/g (wet weight) in whole blood. Blood Hg concentrations in 3 to 6‐week‐old juveniles ranged from 0.03 to 0.78 μg/g (wet weight) ( n = 183). To better interpret exposure data, relationships between blood and feather Hg concentrations were examined among age and sex classes. Blood and feather Hg concentrations from the same individuals were significantly correlated and varied geographically ( r 2 ranged from 0.03 to 0.48). Blood and feather Hg correlated strongest in areas with the highest blood Hg levels, indicating a possible carryover of breeding season Hg that is depurated during winter remigial molt. Mean blood and feather Hg concentrations in males were significantly higher than concentrations in females for each region. The mean blood Hg concentration in adults was 10 times higher than that in juveniles, and feather Hg concentrations significantly increased over 1 to 4‐year periods in recaptured individuals. Geographic stratification indicates a significant increasing regional trend in adult and juvenile blood Hg concentrations from west to east. This gradient resembles U.S. Environmental Protection Agency‐modeled predictions of total anthropogenic Hg deposition across the United States. This gradient is clearest across regions. Within‐region blood Hg concentrations in adults and juveniles across nine sites of one region, the Upper Great Lakes, were less influenced by variations in geographic Hg deposition than by hydrology and lake chemistry. Loons breeding on low‐pH lakes in the Upper Great Lakes and in all lake types of northeastern North America are most at risk from Hg.

Alaska, Maine, Michigan, Minnesota, Montana, New B↗

Integration of eDNA-based biological monitoring within the US Geological Survey’s national streamgage network

This study explores the feasibility and utility of integrating environmental DNA (eDNA) assessments of species occurrences into the United States (U.S.) Geological Survey’s national streamgage network. We used an existing network of five gages in southwest Idaho to explore the type of information that could be gained as well as the associated costs and limitations. Hydrologic technicians were trained in eDNA sampling protocols and they collected samples during routine monthly visits to streamgages over an entire water year (2016). We analyzed the eDNA in the filtered water samples to determine the presence of two fish species: bull trout and rainbow trout. We then modeled the spatiotemporal distribution of each species using discharge and temperature data. To assess the influence of the spatial distribution of the gages on the biological information obtained, we also collected eDNA samples from locations between the gages three times during the water year. We found eDNA monitoring at the five gages provided meaningful information about the distribution of both species, especially when detection probabilities accounted for variations in temperature and discharge. Sampling between the gages provided additional information about bull trout distribution — the rarer of the two species. Our study suggests the integration of eDNA sampling into a streamgage network is feasible and could provide a novel and powerful source of biological information for riverine ecosystems in the U.S.

Idaho, Nebraska↗

Ground-penetrating radar methods used in surface-water discharge measurements

The U.S. Geological Survey (USGS) operates a network of about 7,000 streamflow-gaging stations that monitor open-channel water discharge at locations throughout the United States. The expense, technical difficulties, and concern for the safety of operational personnel under some field conditions have led to the search for alternate measurement methods. Ground- penetrating radar (GPR) has been used by the USGS in hydrologic, geologic, environmental, and bridge-scour studies by floating antennas on water or mounting antennas in boats. GPR methods were developed to measure and monitor remotely the cross-sectional area of rivers by suspending a 100-megahertz (MHz) radar antenna from a cableway car or bridge at four unstable streams that drained the slopes of Mount St. Helens in Washington. Based on the success of these initial efforts, an experiment was conducted in 1999 to see if a combination of complementary radar methods could be used to calculate the discharge of a river without having any of the measuring equipment in the water. The cross-sectional area of the 183- meter (m) wide Skagit River in Washington State was measured using a GPR system with a single 100-MHz antenna suspended 0.5 to 3 m above the water surface from a cableway car. A van- mounted, side-looking pulsed-Doppler (10 gigahertz) radar system was used to collect water-surface velocity data across the same section of the river. The combined radar data sets were used to calculate the river discharge and the results compared closely to the discharge measurement made by using the standard in-water measurement techniques. The depth to the river bottom, which was determined from the GPR data by using a radar velocity of 0.04 meters per nanosecond in water, was about 3 m, which was within 0.25 m of the manually measured values.

Washington↗

Volcano-tectonic history of Crater Flat, southwestern Nevada, as suggested by new evidence from drill hole USW-VH-1 and vicinity

New evidence for a possible resurgent dome in the caldera related to eruption of the Bullfrog Member of the Crater Flat Tuff has been provided by recent drilling of a 762-meter (2,501-foot) hole in central Crater Flat. Although no new volcanic units were penetrated by the drill hole (USW-VH-1), the positive aeromagnetic anomaly in the vicinity of the drill hole appears to result in part from the unusually thick, densely welded tuff of the Bullfrog. Major units penetrated include alluvium, basalt of Crater Flat, Tiva Canyon and Topopah Spring Members of the Paintbrush Tuff, and Prow Pass and Bullfrog Members of the Crater Flat Tuff. In addition, the drill hole provided the first subsurface hydrologic information for the area. The water table in the hole is at about 180 meters (600 feet), and the temperature gradient appears slightly higher than normal for the region.

Nevada↗

Water resources of Monroe County, New York, water years 2003-08: Streamflow, constituent loads, and trends in water quality

This report, the sixth in a series published since 1994, presents analyses of hydrologic data in Monroe County for the period October 2002 through September 2008. Streamflows and water quality were monitored at nine sites by the Monroe County Department of Health and the U.S. Geological Survey. Streamflow yields (flow per unit area) were highest in Northrup Creek, which had sustained flows from year-round inflow from the village of Spencerport wastewater-treatment plant and seasonal releases from the New York State Erie (Barge) Canal. Genesee River streamflow yields also were high, at least in part, as a result of higher rainfall and lower evapotranspiration rates in the upper part of the Genesee River Basin than in the other study basins. The lowest streamflow yields were measured in Honeoye Creek, which reflected a decrease in flows due to the withdrawals from Hemlock and Canadice Lakes for the city of Rochester water supply. Water samples collected at nine monitoring sites were analyzed for nutrients, chloride, sulfate, and total suspended solids. The loads of constituents, which were computed from the concentration data and the daily flows recorded at each of the monitoring sites, are estimates of the mass of the constituents that was transported in the streamflow. Annual yields (loads per unit area) also were computed to assess differences in constituent transport among the study basins. All urban sites - Allen Creek and the two downstream sites on Irondequoit Creek - had seasonally high concentrations and annual yields of chloride. Chloride loads are attributed to the application of road-deicing salts to the county's roadways and are related to population and road densities. The less-urbanized sites in the study - Genesee River, Honeoye Creek, and Oatka Creek - had relatively low concentrations and yields of chloride. The highest concentrations and yields of sulfate were measured in Black Creek, Oatka Creek, and Irondequoit Creek at Railroad Mills and are attributable to dissolution of sulfate from gypsum (calcium sulfate) deposits in Silurian shale bedrock that crops out upstream from these monitoring sites. Northrup Creek had the highest concentrations of phosphorus, orthophosphate, and nitrogen, and high yields of nitrate plus nitrite nitrogen and ammonia plus organic nitrogen. These results are attributed to discharges from the Spencerport wastewater-treatment plant (which ceased operation in June 2008), diversions from the New York State Erie (Barge) Canal, and manure and fertilizers applied to agricultural fields. Concentrations and yields of nitrate plus nitrite nitrogen also were high in Oatka Creek and Black Creek; basins with substantial agricultural land uses. Allen Creek had the second highest yield of ammonia plus organic nitrogen. Honeoye Creek, which drains a relatively undeveloped basin, had the lowest yields of nitrogen constituents. The second highest median concentrations and highest sample concentrations of phosphorus and orthophosphate, as well as the highest phosphorus yields, were measured in the Genesee River. A comparison of the yields computed for the two downstream sites on Irondequoit Creek - above Blossom Road and at Empire Boulevard - permitted an assessment of the mitigative effects of the Ellison Park wetland on constituent loads, which would otherwise be transported to Irondequoit Bay. These effects also include those provided by a flow-control structure (installed mid-way through the wetland during February 1997), which was designed to increase the dispersal and short-term detention of stormflows in the wetland. The wetland decreased yields of particulate constituents - phosphorus and ammonia plus organic nitrogen - but had little effect on the yields of dissolved constituents - chloride, sulfate, and nitrate plus nitrite nitrogen. Trends in flow-adjusted concentrations were identified at all sites for most of the nutrient constituents that were evaluated. All of the linear time tren

Scientific Investigations Report↗

Hydrology of carbonate aquifers in southwestern Linn County and adjacent parts of Benton, Iowa, and Johnson Counties, Iowa

Groundwater is the major source of water in Linn County and the surrounding area. Approximately 90 percent of the groundwater production is from Silurian, Devonian, and Quaternary aquifers. The Silurian and Devonian aquifers consist of limestone and dolomite with minor shale beds, which have a regional dip to the southwest of approximately 20 feet per mile. The Silurian aquifer in east-central Iowa is confined from below by Upper Ordovician, Maquoketa Formation shales, and from above by the Kenwood Member of the Wapsipinicon Formation and the Otis and Bertram formations. The Quaternary aquifer consists of unconsolidated sand and gravel beds in the glacial drift, and in the alluvium which is associated with modern streams. The alluvium consists of lenticular beds of poorly-to well-sorted silt, sand, and gravel. The sand and gravel beds are interlayered with relatively-impermeable beds of till, silt, and clay. Water moves through the Silurian aquifer in part due to a complex distribution of porous and dense carbonate facies. Horizons containing skeletal molds in the Silurian dolomite have porosities as much as 39 percent, and are laterally equivalent to dolomites with porosities as little as less than one percent. Because of subsequent fracturing and solutional enlargement of these porous horizons, hydrologic correlation of the primary water-yielding zones is not always possible. One horizon, however, does occur approximately 70 to 105 feet above the base of the Silurian, and is the most consistently productive water-yielding unit in the area. This horizon is Informally referred to as the Farmers Creek aquifer. The potentiometric surface of the Silurian aquifer has a gradient towards the Cedar River, indicating discharge from the aquifer through the alluvium into the river. By comparison, the potentiometric surface of the overlying Devonian aquifer is equal to that of the Silurian and may range to more than 40 feet higher. Yields to individual wells completed in the Silurian and Devonian carbonate aquifers vary from less than 10 to about 500 gallons per minute. Individual wells completed in the Quaternary aquifer yield as much as 2,000 gallons per minute. Water analyses from the Devonian and Silurian aquifers indicate that they are of similar chemical quality at most locations in the study area. However, they may commonly contain concentrations of sulfate that exceed 1,000 mil grams per liter. Dissolved-solids concentrations as much as 2,350 milligrams per liter occur in the Silurian aquifer in the western and southwestern part of the study area. Water from the Quaternary aquifer generally is suitable for most uses and dissolved-solids concentrations generally are less than 750 milligrams per liter.

Iowa↗

Floods of Selected Streams in Arkansas, Spring 2008

Floods can cause loss of life and extensive destruction to property. Monitoring floods and understanding the reasons for their occurrence are the responsibility of many Federal agencies. The National Weather Service, the U.S. Army Corps of Engineers, and the U.S. Geological Survey are among the most visible of these agencies. Together, these three agencies collect and analyze floodflow information to better understand the variety of mechanisms that cause floods, and how the characteristics and frequencies of floods vary with time and location. The U.S. Geological Survey (USGS) has monitored and assessed the quantity of streamflow in our Nation's streams since the agency's inception in 1879. Because of ongoing collection and assessment of streamflow data, the USGS can provide information about a range of surface-water issues including the suitability of water for public supply and irrigation and the effects of agriculture and urbanization on streamflow. As part of its streamflow-data collection activities, the USGS measured streamflow in multiple streams during extreme flood events in Arkansas in the spring of 2008. The analysis of streamflow information collected during flood events such as these provides a scientific basis for decision making related to resource management and restoration. Additionally, this information can be used by water-resource managers to better define flood-hazard areas and to design bridges, culverts, dams, levees, and other structures. Water levels (stage) and streamflow (discharge) currently are being monitored in near real-time at approximately 150 locations in Arkansas. The streamflow-gaging stations measure and record hydrologic data at 15-minute or hourly intervals; the data then are transmitted through satellites to the USGS database and displayed on the internet every 1 to 4 hours. Streamflow-gaging stations in Arkansas are part of a network of over 7,500 active streamflow-gaging stations operated by the USGS throughout the United States in cooperation with other Federal, State, and local government agencies. In Arkansas, the major supporters of the streamflow-gaging network are the U.S. Army Corps of Engineers, Arkansas Natural Resources Commission, Arkansas Department of Environmental Quality, and Arkansas Geological Survey. Many other Federal, State, and local government entities provide additional support for streamflow-gaging stations. It is the combined support of the USGS and all funding partners that make it possible to maintain an adequate streamflow-gaging network in Arkansas. Data collected over the years at streamflow-gaging stations can be used to characterize the relative magnitude of flood events and their statistical frequency of occurrence. These analyses provide water-resource managers with accurate and reliable hydrologic information based on present and historical flow conditions. Continued collection of streamflow data, with consideration of changes in land use, agricultural practices, and climate change, will help scientists to more accurately characterize the magnitude of extreme floods in the future.

Fact Sheet↗

Simulated Effects of Seasonal Ground-Water Pumpage for Irrigation on Hydrologic Conditions in the Lower Apalachicola-Chattahoochee-Flint River Basin, Southwestern Georgia and Parts of Alabama and Florida, 1999-2002

To determine the effects of seasonal ground-water pumpage for irrigation, a finite-element ground-water flow model was developed for the Upper Floridan aquifer in the lower Flint River Basin area, including adjacent parts of the Chattahoochee and Apalachicola River Basins. The model simulates withdrawal from the aquifer at 3,280 irrigation, municipal, and industrial wells; stream-aquifer flow between the aquifer and 36 area streams; leakage to and from the overlying upper semiconfining unit; regional ground-water flow at the lateral boundaries of the model; and water-table recharge in areas where the aquifer is at or near land surface. Steady-state calibration to drought conditions of October 1999 indicated that the model could adequately simulate measured groundwater levels at 275 well locations and streamflow gains and losses along 53 reaches of area streams. A transient simulation having 12 monthly stress periods from March 2001 to February 2002 incorporated time-varying stress from irrigation pumpage, stream and lake stage, head in the overlying upper semiconfining unit, and infiltration rates. Analysis of simulated water budgets of the Upper Floridan aquifer provides estimates of the source of water pumped for irrigation. During October 1999, an estimated 127 million gallons per day (Mgal/d) of irrigation pumpage from the Upper Floridan aquifer in the model area were simulated to be derived from changes in: stream-aquifer flux (about 56 Mgal/d, or 44 percent); leakage to or from the upper semiconfining unit (about 49 Mgal/d, or 39 percent); regional flow (about 18 Mgal/d, or 14 percent); leakage to or from Lakes Seminole and Blackshear (about 2.7 Mgal/d, or 2 percent); and flux at the Upper Floridan aquifer updip boundary (about 1.8 Mgal/d, or 1 percent). During the 2001 growing season (May-August), estimated irrigation pumpage ranged from about 310 to 830 Mgal/ d, about 79 percent of the 12-month total. During the growing season, irrigation pumpage was derived from decreased discharge or increased recharge of stream-aquifer flux (from about 23 to 39 percent), leakage to or from the upper semiconfining unit (from about 30 to 36 percent), regional flow (from about 8 to 11 percent), Lakes Seminole and Blackshear (about 2 percent), and flux at the Upper Floridan aquifer updip boundary (about 1 percent). Storage effects (decreased storage gain or increased storage loss) contributed from about 11 to 36 percent of irrigation pumpage during the growing season. Water managers can use the model to determine where and how much additional ground-water pumpage for irrigation should be permitted based on a variety of hydrologic constraints. For example, the model results may indicate that in some critical locations, additional ground-water pumpage during a prolonged drought might reduce stream-aquifer flux enough to cause noncompliance of established minimum instream flow conditions.

Alabama, Florida, Georgia↗

Surficial geologic map of the Amboy 30' x 60' quadrangle, San Bernardino County, California

The surficial geologic map of the Amboy 30' x 60' quadrangle presents characteristics of surficial materials for an area of approximately 5,000 km2 in the eastern Mojave Desert of southern California. This map consists of new surficial mapping conducted between 2000 and 2007, as well as compilations from previous surficial mapping. Surficial geologic units are mapped and described based on depositional process and age categories that reflect the mode of deposition, pedogenic effects following deposition, and, where appropriate, the lithologic nature of the material. Many physical properties were noted and measured during the geologic mapping. This information was used to classify surficial deposits and to understand their ecological importance. We focus on physical properties that drive hydrologic, biologic, and physical processes such as particle-size distribution (PSD) and bulk density. The database contains point data representing locations of samples for both laboratory determined physical properties and semiquantitative field-based information in the database. We include the locations of all field observations and note the type of information collected in the field to help assist in assessing the quality of the mapping. The publication is separated into three parts: documentation, spatial data, and printable map graphics of the database. Documentation includes this pamphlet, which provides a discussion of the surficial geology and units and the map. Spatial data are distributed as ArcGIS Geodatabase in Microsoft Access format and are accompanied by a readme file, which describes the database contents, and FGDC metadata for the spatial map information. Map graphics files are distributed as Postscript and Adobe Portable Document Format (PDF) files that provide a view of the spatial database at the mapped scale.

Scientific Investigations Map↗

Surficial geologic map of the Amboy 30' x 60' quadrangle, San Bernardino County, California

The surficial geologic map of the Amboy 30' x 60' quadrangle presents characteristics of surficial materials for an area of approximately 5,000 km 2 in the eastern Mojave Desert of southern California. This map consists of new surficial mapping conducted between 2000 and 2007, as well as compilations from previous surficial mapping. Surficial geologic units are mapped and described based on depositional process and age categories that reflect the mode of deposition, pedogenic effects following deposition, and, where appropriate, the lithologic nature of the material. Many physical properties were noted and measured during the geologic mapping. This information was used to classify surficial deposits and to understand their ecological importance. We focus on physical properties that drive hydrologic, biologic, and physical processes such as particle-size distribution (PSD) and bulk density. The database contains point data representing locations of samples for both laboratory determined physical properties and semiquantitative field-based information in the database. We include the locations of all field observations and note the type of information collected in the field to help assist in assessing the quality of the mapping. The publication is separated into three parts: documentation, spatial data, and printable map graphics of the database. Documentation includes this pamphlet, which provides a discussion of the surficial geology and units and the map. Spatial data are distributed as ArcGIS Geodatabase in Microsoft Access format and are accompanied by a readme file, which describes the database contents, and FGDC metadata for the spatial map information. Map graphics files are distributed as Postscript and Adobe Portable Document Format (PDF) files that provide a view of the spatial database at the mapped scale.

California↗

Water Resources Data Massachusetts and Rhode Island Water Year 1999

INTRODUCTION The Water Resources Division of the U.S. Geological Survey, in cooperation with State agencies, obtains a large amount of data pertaining to the water resources of Massachusetts and Rhode Island each water year. These data, accumulated during many water years, constitute a valuable data base for developing an improved understanding of the water resources of the States. To make these data readily available to interested parties outside the Geological Survey, the data are published annually in this report series entitled 'Water Resources Data-Massachusetts and Rhode Island.' Hydrologic data are also available through the Massachusetts-Rhode Island District Home Page on the world-wide web (http://ma.water.usgs.gov). Historical data and real-time data (for sites equipped with satellite gage-height telemeter) are also available. The home page also contains a link to the U.S. Geological Survey National Home Page where streamflow data from locations throughout the United States can be retrieved. This report series includes records of stage, discharge, and water quality of streams; contents of lakes and reservoirs; water levels of ground-water wells; and water quality of ground-water wells. This volume contains discharge records at 90 gaging stations; stage records at 2 gaging stations; monthend contents of 4 lakes and reservoirs; water quality at 31 gaging stations; water quality at 27 observation wells; and water levels for 139 observation wells. Locations of these sites are shown in figures 1 and 2. Short-term water-quality data were collected at 21 gaging stations and 27 observation wells and are shown in figure 3. Miscellaneous hydrologic data were collected at various sites that were not involved in the systematic data-collection program and are published as miscellaneous discharge measurements. The data in this report represent that part of the National Water Data System operated by the U.S. Geological Survey and cooperating State and Federal agencies in Massachusetts and Rhode Island. This series of annual reports for Massachusetts and Rhode Island began with the 1961 water year with a report that contained only data relating to the quantities of surface water. For the 1964 water year, a similar report was introduced that contained only data relating to water quality. Beginning with the 1975 water year, the report format was changed to present, in one volume, data on quantities of surface water, quality of surface and ground water, and ground-water levels. Prior to introduction of this series and for several water years concurrent with it, water-resources data for Massachusetts and Rhode Island were published in U.S. Geological Survey Water-Supply Papers. Data on stream discharge and stage and on lake or reservoir contents and stage, through September 1960, were published annually under the title 'Surface-Water Supply of the United States, Parts 1A and 1B.' For the 1961 through 1970 water years, the data were published in two 5-year reports. Data on chemical quality, temperature, and suspended sediment for the 1941 through 1970 water years were published annually under the title 'Quality of Surface Waters of the United States,' and water levels for the 1939 through 1974 water years were published under the title 'Ground-Water Levels in the United States.' The above mentioned Water-Supply Papers may be consulted in the libraries of the principal cities of the United States and may be purchased from U.S. Geological Survey, Information Services, Box 25286, Denver Federal Center, Box 25425, Denver, CO 80225-0286. Publications similar to this report are published annually by the Geological Survey for all States. These official Survey reports have an identification number consisting of the two-letter State abbreviation, the last two digits of the water year, and the volume number. For example, this volume is identified as 'U.S. Geological Survey Water-Data Report MARI-98-1.' For archiving and general d

Water Data Report↗

Attributes for NHDPlus Catchments (Version 1.1) for the Conterminous United States: Mean Annual R-factor, 1971-2000

This data set represents the average annual R-factor, rainfall-runoff erosivity measure, compiled for every catchment of NHDPlus for the conterminous United States. The source data are from Christopher Daly of the Spatial Climate Analysis Service, Oregon State University, and George Taylor of the Oregon Climate Service, Oregon State University (2002), who developed spatially distributed estimates of R-factor for the period 1971-2000 for the conterminous United States. The NHDPlus Version 1.1 is an integrated suite of application-ready geospatial datasets that incorporates many of the best features of the National Hydrography Dataset (NHD) and the National Elevation Dataset (NED). The NHDPlus includes a stream network (based on the 1:100,00-scale NHD), improved networking, naming, and value-added attributes (VAAs). NHDPlus also includes elevation-derived catchments (drainage areas) produced using a drainage enforcement technique first widely used in New England, and thus referred to as "the New England Method." This technique involves "burning in" the 1:100,000-scale NHD and when available building "walls" using the National Watershed Boundary Dataset (WBD). The resulting modified digital elevation model (HydroDEM) is used to produce hydrologic derivatives that agree with the NHD and WBD. Over the past two years, an interdisciplinary team from the U.S. Geological Survey (USGS), and the U.S. Environmental Protection Agency (USEPA), and contractors, found that this method produces the best quality NHD catchments using an automated process (USEPA, 2007). The NHDPlus dataset is organized by 18 Production Units that cover the conterminous United States. The NHDPlus version 1.1 data are grouped by the U.S. Geologic Survey's Major River Basins (MRBs, Crawford and others, 2006). MRB1, covering the New England and Mid-Atlantic River basins, contains NHDPlus Production Units 1 and 2. MRB2, covering the South Atlantic-Gulf and Tennessee River basins, contains NHDPlus Production Units 3 and 6. MRB3, covering the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy River basins, contains NHDPlus Production Units 4, 5, 7 and 9. MRB4, covering the Missouri River basins, contains NHDPlus Production Units 10-lower and 10-upper. MRB5, covering the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf River basins, contains NHDPlus Production Units 8, 11 and 12. MRB6, covering the Rio Grande, Colorado and Great Basin River basins, contains NHDPlus Production Units 13, 14, 15 and 16. MRB7, covering the Pacific Northwest River basins, contains NHDPlus Production Unit 17. MRB8, covering California River basins, contains NHDPlus Production Unit 18.

Data Series↗

Assessment of water availability in the Osage Nation using an integrated hydrologic-flow model

The Osage Nation of northeastern Oklahoma, conterminous with Osage County, covers about 2,900 square miles. The area is primarily rural with 62 percent of the land being native prairie grass, and much of the area is used for cattle ranching and extraction of petroleum and natural gas. Protection of water rights are important to the Osage Nation because of its reliance on cattle ranching and the potential for impairment of water quality by petroleum extraction. Additionally, the potential for future population increases, demands for water from neighboring areas such as the Tulsa metropolitan area, and expansion of petroleum and natural-gas extraction on water resources of this area further the need for the Osage Nation to better understand its water availability. Therefore, the U.S. Geological Survey, in cooperation with the Osage Nation, completed a hydrologic investigation to assess the status and availability of surface-water and groundwater resources in the Osage Nation. A transient integrated hydrologic-flow model was constructed using the U.S. Geological Survey fully integrated hydrologic-flow model called the MODFLOW One-Water Hydrologic Model. The integrated hydrologic-flow model, called the Osage Nation Integrated Hydrologic Model (ONIHM), was constructed and uses an orthogonal grid of 276 rows and 289 columns, and each grid cell measures 1,312.34 feet (ft; 400 meters) per side, with eight variably thick vertical layers that represented the alluvial and bedrock aquifers within the study area, including the alluvial aquifer, the Vamoosa-Ada aquifer, and the minor Pennsylvanian bedrock aquifers, and the confining units. Landscape and groundwater-flow processes were simulated for two periods: (1) the 1950–2014 period from January 1950 through September 2014 and (2) the forecast period from October 2014 through December 2099. The 1950–2014 period ONIHM simulated past conditions using measured or estimated inputs, and the forecast-period ONIHM simulated three separate potential forecast conditions under constant dry, average, or wet climate conditions using calibrated input values from the 1950–2014 period ONIHM. The 1950–2014 period ONIHM was calibrated by linking the Parameter Estimation software (PEST) with the MODFLOW One-Water Hydrologic Model. PEST uses statistical parameter estimation techniques to identify the best set of parameter values to minimize the difference between measured or estimated calibration targets and their simulated equivalent values (residuals). Tikhonov regularization and singular-value decomposition-assist features of PEST were used during the calibration process. The 1950–2014 period ONIHM was calibrated to 713 measured groundwater levels at 195 wells; 95,636 estimated monthly mean groundwater levels at 124 wells; 5,307 measured streamflows at 13 streamgages; and 8,679 simulated mean monthly streamflows at 10 streamgages extracted from a surface-water model by adjusting 231 parameters. The estimated groundwater-level observations and streamflows were included as observations to improve the spatial and temporal density of observation targets during calibration. The best set of parameter values obtained during the calibration process of the 1950–2014 model was then used as the input parameter values for the forecast model simulations. A comparison of the calibration targets to their corresponding simulated values indicated that the model adequately reproduced streamflows and groundwater levels for some streamgages and wells and underestimated streamflows and groundwater levels at other locations. Measured and simulated streamflows correlated adequately with a coefficient of determination of 0.938, as did water levels with a coefficient of determination of 0.795. The 1950–2014 period ONIHM underestimated certain groundwater levels and streamflows, but generally measured or estimated calibration targets correlated well with simulated equivalents, which indicated that the model can adequately simulate the response of the hydrologic system to stresses in the 1950–2014 and forecast periods. In the 1950–2014 period ONIHM, the calibrated mean horizontal hydraulic conductivity for layer 1 alluvial aquifer was 30.7 feet per day, and the seven lower layers had a calibrated mean horizontal hydraulic conductivity of less than 3.3 feet per day. The mean calibrated groundwater-level residual was 16.6 ft, and the mean calibrated streamflow residual of the Arkansas River at Ralston, Oklahoma, streamgage (U.S. Geological Survey station 07152500) was within 6 percent (373 cubic feet per second) of mean measured streamflow for the 1950–2014 period ONIHM. The ONIHM simulated landscape fluxes of precipitation; groundwater applied by irrigation wells; evapotranspiration from precipitation, groundwater, and irrigation; runoff from precipitation; and deep percolation from precipitation. The largest loss of water from the landscape was evapotranspiration from precipitation with a calibrated mean annual outflow of 32 inches (in.): mean annual precipitation was about 36 in. Calibrated mean annual runoff and deep percolation (recharge to the water table) rates were 4.7 inches per year (in/yr) and 0.70 in/yr, respectively, for the 1950–2014 period ONIHM. The calibrated 1950–2014 period ONIHM groundwater fluxes included net farm net recharge (calculated as the difference between the inflow of recharge to the water table and the outflow of evapotranspiration from the water table such that negative values indicate that evapotranspiration from the water table was greater than deep percolation [recharge to the water table] and vice versa). Net farm net recharge was the largest flux from the groundwater system with a mean annual net outflow of 153.4 cubic feet per second. Stream leakage was the largest flux to the groundwater system with a mean annual net inflow of 152.5 cubic feet per second, indicating that, on average, the groundwater/surface-water interaction was a “losing” system where stream water leaked into the subsurface and recharged the water table. Simulated monthly trends demonstrated that net stream leakage was the largest inflow to the groundwater-flow system for 10 of the 12 months; for the other 2 months (January and March), farm net recharge (January) and net storage (March) were the largest inflow to the groundwater-flow system. A saline groundwater interface map was created for the study and compared to the water levels from the final stress period of the 1950–2014 model to identify the presence of fresh/marginal groundwater throughout the study area. Fresh/marginal groundwater was characterized as groundwater with less than 1,500 milligrams per liter of total dissolved solids. Fresh/marginal groundwater thickness ranged from 0 to 438.2 ft within the study area. The thickest regions of fresh/marginal groundwater were in the eastern part of the study area near Sand Creek, Bird Creek, and Hominy Creek and in the Arkansas River alluvial aquifer in the region downstream from the Arkansas River at Ralston, Okla. Like the 1950–2014 model, forecast model results for the landscape indicated that transpiration from precipitation was the largest flux out of the landscape for all three forecasts, constituting 77, 73, and 58 percent of precipitation for the dry, average, and wet forecasts, respectively. The dry and average forecast landscape fluxes demonstrated similar trends and magnitudes, whereas the wet forecast landscape fluxes indicated the largest changes compared to the average forecast fluxes. Most notably, runoff increased from a mean of 1.1 and 1.6 in/yr for the dry and average forecasts, respectively, to 10 in/yr for the wet forecast. Similar changes occurred for the other wet forecast landscape fluxes. The calibrated 1950–2014 period ONIHM simulated three forecasts to assess the effects of potential climatic changes on the hydrologic system from October 2014 to December 2099. The three forecasts simulated theoretical dry, average, and wet conditions using precipitation and potential evapotranspiration datasets from selected years in the calibrated 1950–2014 period ONIHM. Annual precipitation amounts were 26.89, 35.47, and 50.73 in. for the dry, average, and wet forecasts, respectively. Groundwater-flow component forecast results indicated that stream leakage is always a net inflow to the groundwater-flow system for dry, average, and wet conditions, meaning the study area stream network is always predominantly a “losing” regime where stream water infiltrates into the underlying aquifer. Storage was only a net outflow from the groundwater-flow system and indicated a replenishment to groundwater storage that resulted in an increase in groundwater levels only during the wet forecast. Further, these gains in groundwater storage for the wet forecast occurred only during February through June. Mean fresh/marginal groundwater saturated thicknesses were 125 and 126 ft for the dry and average forecast conditions, respectively, and wet forecast average thickness was 145 ft and ranged from 0 to 443 ft. The spatial extents of fresh/marginal groundwater at the end of the dry, average, and wet forecast model periods (December 2099) did not change substantially from the end of the 1950–2014 model period (September 2014).

Kansas, Oklahoma↗

Attributes for NHDPlus Catchments (Version 1.1) for the Conterminous United States: Base-Flow Index

This tabular data set represents the mean base-flow index expressed as a percent, compiled for every catchment in NHDPlus for the conterminous United States. Base flow is the component of streamflow that can be attributed to ground-water discharge into streams. The source data set is Base-Flow Index for the Conterminous United States (Wolock, 2003). The NHDPlus Version 1.1 is an integrated suite of application-ready geospatial datasets that incorporates many of the best features of the National Hydrography Dataset (NHD) and the National Elevation Dataset (NED). The NHDPlus includes a stream network (based on the 1:100,00-scale NHD), improved networking, naming, and value-added attributes (VAAs). NHDPlus also includes elevation-derived catchments (drainage areas) produced using a drainage enforcement technique first widely used in New England, and thus referred to as "the New England Method." This technique involves "burning in" the 1:100,000-scale NHD and when available building "walls" using the National Watershed Boundary Dataset (WBD). The resulting modified digital elevation model (HydroDEM) is used to produce hydrologic derivatives that agree with the NHD and WBD. Over the past two years, an interdisciplinary team from the U.S. Geological Survey (USGS), and the U.S. Environmental Protection Agency (USEPA), and contractors, found that this method produces the best quality NHD catchments using an automated process (USEPA, 2007). The NHDPlus dataset is organized by 18 Production Units that cover the conterminous United States. The NHDPlus version 1.1 data are grouped by the U.S. Geologic Survey's Major River Basins (MRBs, Crawford and others, 2006). MRB1, covering the New England and Mid-Atlantic River basins, contains NHDPlus Production Units 1 and 2. MRB2, covering the South Atlantic-Gulf and Tennessee River basins, contains NHDPlus Production Units 3 and 6. MRB3, covering the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy River basins, contains NHDPlus Production Units 4, 5, 7 and 9. MRB4, covering the Missouri River basins, contains NHDPlus Production Units 10-lower and 10-upper. MRB5, covering the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf River basins, contains NHDPlus Production Units 8, 11 and 12. MRB6, covering the Rio Grande, Colorado and Great Basin River basins, contains NHDPlus Production Units 13, 14, 15 and 16. MRB7, covering the Pacific Northwest River basins, contains NHDPlus Production Unit 17. MRB8, covering California River basins, contains NHDPlus Production Unit 18.

Data Series↗

Attributes for NHDPlus Catchments (Version 1.1) for the Conterminous United States: Mean Infiltration-Excess Overland Flow, 2002

This tabular data set represents the mean value for infiltration-excess overland flow as estimated by the watershed model TOPMODEL, compiled for every catchment of NHDPlus for the conterminous United States. Infiltration-excess overland flow, expressed as a percent of total overland flow, is simulated in TOPMODEL as precipitation that exceeds the infiltration capacity of the soil and enters the stream channel. The source data set is Infiltration-Excess Overland Flow Estimated by TOPMODEL for the Conterminous United States (Wolock, 2003). The NHDPlus Version 1.1 is an integrated suite of application-ready geospatial datasets that incorporates many of the best features of the National Hydrography Dataset (NHD) and the National Elevation Dataset (NED). The NHDPlus includes a stream network (based on the 1:100,00-scale NHD), improved networking, naming, and value-added attributes (VAAs). NHDPlus also includes elevation-derived catchments (drainage areas) produced using a drainage enforcement technique first widely used in New England, and thus referred to as "the New England Method." This technique involves "burning in" the 1:100,000-scale NHD and when available building "walls" using the National Watershed Boundary Dataset (WBD). The resulting modified digital elevation model (HydroDEM) is used to produce hydrologic derivatives that agree with the NHD and WBD. Over the past two years, an interdisciplinary team from the U.S. Geological Survey (USGS), and the U.S. Environmental Protection Agency (USEPA), and contractors, found that this method produces the best quality NHD catchments using an automated process (USEPA, 2007). The NHDPlus dataset is organized by 18 Production Units that cover the conterminous United States. The NHDPlus version 1.1 data are grouped by the U.S. Geologic Survey's Major River Basins (MRBs, Crawford and others, 2006). MRB1, covering the New England and Mid-Atlantic River basins, contains NHDPlus Production Units 1 and 2. MRB2, covering the South Atlantic-Gulf and Tennessee River basins, contains NHDPlus Production Units 3 and 6. MRB3, covering the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy River basins, contains NHDPlus Production Units 4, 5, 7 and 9. MRB4, covering the Missouri River basins, contains NHDPlus Production Units 10-lower and 10-upper. MRB5, covering the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf River basins, contains NHDPlus Production Units 8, 11 and 12. MRB6, covering the Rio Grande, Colorado and Great Basin River basins, contains NHDPlus Production Units 13, 14, 15 and 16. MRB7, covering the Pacific Northwest River basins, contains NHDPlus Production Unit 17. MRB8, covering California River basins, contains NHDPlus Production Unit 18.

Data Series↗

Attributes for NHDplus Catchments (Version 1.1) for the Conterminous United States: Population Density, 2000

This data set represents the average population density, in number of people per square kilometer multiplied by 10 for the year 2000, compiled for every catchment of NHDPlus for the conterminous United States. The source data set is the 2000 Population Density by Block Group for the Conterminous United States (Hitt, 2003). The NHDPlus Version 1.1 is an integrated suite of application-ready geospatial datasets that incorporates many of the best features of the National Hydrography Dataset (NHD) and the National Elevation Dataset (NED). The NHDPlus includes a stream network (based on the 1:100,00-scale NHD), improved networking, naming, and value-added attributes (VAAs). NHDPlus also includes elevation-derived catchments (drainage areas) produced using a drainage enforcement technique first widely used in New England, and thus referred to as "the New England Method." This technique involves "burning in" the 1:100,000-scale NHD and when available building "walls" using the National Watershed Boundary Dataset (WBD). The resulting modified digital elevation model (HydroDEM) is used to produce hydrologic derivatives that agree with the NHD and WBD. Over the past two years, an interdisciplinary team from the U.S. Geological Survey (USGS), and the U.S. Environmental Protection Agency (USEPA), and contractors, found that this method produces the best quality NHD catchments using an automated process (USEPA, 2007). The NHDPlus dataset is organized by 18 Production Units that cover the conterminous United States. The NHDPlus version 1.1 data are grouped by the U.S. Geologic Survey's Major River Basins (MRBs, Crawford and others, 2006). MRB1, covering the New England and Mid-Atlantic River basins, contains NHDPlus Production Units 1 and 2. MRB2, covering the South Atlantic-Gulf and Tennessee River basins, contains NHDPlus Production Units 3 and 6. MRB3, covering the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy River basins, contains NHDPlus Production Units 4, 5, 7 and 9. MRB4, covering the Missouri River basins, contains NHDPlus Production Units 10-lower and 10-upper. MRB5, covering the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf River basins, contains NHDPlus Production Units 8, 11 and 12. MRB6, covering the Rio Grande, Colorado and Great Basin River basins, contains NHDPlus Production Units 13, 14, 15 and 16. MRB7, covering the Pacific Northwest River basins, contains NHDPlus Production Unit 17. MRB8, covering California River basins, contains NHDPlus Production Unit 18.

Data Series↗

Attributes for NHDPlus Catchments (Version 1.1) for the Conterminous United States: Estimated Mean Annual Natural Groundwater Recharge, 2002

This data set represents the mean annual natural groundwater recharge, in millimeters, compiled for every catchment of NHDPlus for the conterminous United States. The source data set is Estimated Mean Annual Natural Ground-Water Recharge in the Conterminous United States (Wolock, 2003). The NHDPlus Version 1.1 is an integrated suite of application-ready geospatial datasets that incorporates many of the best features of the National Hydrography Dataset (NHD) and the National Elevation Dataset (NED). The NHDPlus includes a stream network (based on the 1:100,00-scale NHD), improved networking, naming, and value-added attributes (VAAs). NHDPlus also includes elevation-derived catchments (drainage areas) produced using a drainage enforcement technique first widely used in New England, and thus referred to as "the New England Method." This technique involves "burning in" the 1:100,000-scale NHD and when available building "walls" using the National Watershed Boundary Dataset (WBD). The resulting modified digital elevation model (HydroDEM) is used to produce hydrologic derivatives that agree with the NHD and WBD. Over the past two years, an interdisciplinary team from the U.S. Geological Survey (USGS), and the U.S. Environmental Protection Agency (USEPA), and contractors, found that this method produces the best quality NHD catchments using an automated process (USEPA, 2007). The NHDPlus dataset is organized by 18 Production Units that cover the conterminous United States. The NHDPlus version 1.1 data are grouped by the U.S. Geologic Survey's Major River Basins (MRBs, Crawford and others, 2006). MRB1, covering the New England and Mid-Atlantic River basins, containing NHDPlus Production Units 1 and 2. MRB2, covering the South Atlantic-Gulf and Tennessee River basins, contains NHDPlus Production Units 3 and 6. MRB3, covering the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy River basins, contains NHDPlus Production Units 4, 5, 7 and 9. MRB4, covering the Missouri River basins, contains NHDPlus Production Units 10-lower and 10-upper. MRB5, covering the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf River basins, contains NHDPlus Production Units 8, 11 and 12. MRB6, covering the Rio Grande, Colorado and Great Basin River basins, contains NHDPlus Production Units 13, 14, 15 and 16. MRB7, covering the Pacific Northwest River basins, contains NHDPlus Production Unit 17. MRB8, covering California River basins, contains NHDPlus Production Unit 18.

Data Series↗