Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Environmental Science and Technology - Water”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,666 records · Page 76Linked to original sources
USGS2024

Distribution of ancient carbon in groundwater and soil gas from degradation of petroleum near the Red Hill Bulk Fuel Storage Facility, O‘ahu, Hawai‘i

The groundwater below the Red Hill Bulk Fuel Storage Facility (the facility) in Oʻahu, Hawaiʻi, contains fuel compounds from past spills. This study used carbon-14 analyses to distinguish fuel-derived carbon from background carbon, along with other biodegradation indicators, to address two goals: (1) determine the extent and migration direction of groundwater affected by residual fuel below the facility and (2) determine if residual fuel locations in the subsurface could be identified by analyzing soil gas at the surface above the facility. Groundwater from 19 wells was sampled between September 2022 and April 2023. Nonvolatile dissolved organic carbon (NVDOC) from a well presumed to be unaffected by past spills contained 38 percent ancient carbon indicating a natural source of ancient carbon in the subsurface. The NVDOC concentrations and ancient carbon percentages indicate fuel biodegradation products are likely present on the north and south of Red Hill with the greatest effects at well RHMW02 near the 2014 spill site. The NVDOC concentrations are almost three times higher than diesel range organic (DRO) concentrations in groundwater from the same sites. Major ion data indicate that iron reduction is an important biodegradation process. Soil probe samples and soil carbon traps were used to determine the carbon-14 content of soil carbon dioxide. Ancient carbon from fuel biodegradation was not detected at any soil probe or carbon trap site in contrast to a 2017 study which reported ancient carbon detections. A reanalysis of the 2017 results using a range of local values for background carbon-14 indicates that ancient carbon from fuel biodegradation was probably only detected in lower tunnel exhaust system samples and not in any soil carbon trap samples. Measurements of carbon dioxide efflux with a dynamic closed chamber were highly variable. The soil gas results indicate that soil gas measurements at land surface were not useful for detecting residual fuel at the facility.

Hawaii↗
USGS2025

Late Pleistocene kinematics of the Great Southern Puerto Rico Fault Zone, Puerto Rico

Several onshore faults in southern Puerto Rico have recently been recognized as Quaternary active. However, the kinematics of these faults, particularly any lateral component, remain largely unconstrained. It is difficult to characterize low strain‐rate faults, partially due to extensive erosional and anthropogenic landscape modification, steep relief, and frequent landsliding, limiting the preservation of geomorphic features that could serve as recorders of fault motion. Here, we constrain the kinematics along sections of the Great Southern Puerto Rico Fault Zone (GSPRFZ) on the southern coastal plain of Puerto Rico. We integrate ∼1‐m‐resolution light detection and ranging (lidar)‐derived topography, historical air photos, and field mapping to identify a series of ∼50–1200‐m‐long fault scarps and lineaments that trend northwest–southeast and extend for ≥25 km across the southern coastal plain. Fault scarps are primarily south facing, cut across topography, and displace Quaternary deposits and landforms. We document multiple offset geomorphic markers, including channel thalwegs and interfluves formed in deposits previously mapped as Quaternary piedmont alluvial plain. We observe both vertical (south‐side‐down) and right‐lateral meter‐scale displacements, which indicate that the GSPRFZ accommodates right‐lateral oblique motion in the late Pleistocene, consistent with northeast motion of the Puerto Rico and the Virgin Islands microplate away from the Hispaniola block.

Puerto Rico↗
USGS2026

A methods framework for evaluating measurement consistency across spectrometers for multispectral uncrewed aerial system vegetation mapping applications

The U.S. Geological Survey collects remote sensing data to support national scientific assessments of natural resources, hazards, and landscape change. Spectrometers and spectroradiometers are essential for gathering point-based spectral measurements used in applications such as uncrewed aerial systems (UAS) multispectral image calibration, validation, and analysis. Evaluating how different instruments perform in laboratory and field environments helps determine whether they provide consistent, interoperable measurements. Such verification can expand access to spectral ground data during UAS operations by allowing scientists to use alternative instruments when budgets, logistics, or field conditions limit options. We propose and test a methodological framework for evaluating spectrometers for measurement consistency during UAS multispectral vegetation mapping applications. There are three central evaluation components to the framework: laboratory, field, and relative to UAS multispectral imagery. By evaluating the instruments in both relatively controlled and uncontrolled environments, we thoroughly examine measurement consistency and when/why measurements may differ. We opportunistically selected two instruments for a case study in a coastal marsh setting: a compact laboratory spectrometer we modified for field use and a field-ready spectroradiometer. The instruments produced consistent measurements in both environments. We found differences between the field spectra and UAS spectra that likely reflect the perspectives of ground vs. aerial data and indicate that further radiometric calibration may be needed.

Massachusetts↗
USGS2026

Regional variations in sea ice and primary productivity in the Bering Sea during Marine Isotope Stage 11

Marine Isotope Stage (MIS) 11 (424-374 ka) has long been an analog for Holocene climate, because it is the most recent interglacial period with similar orbital conditions. However, there is significant global and regional variability in the climate response to MIS 11 warmth. Here, we review sediment core records from across the Bering Sea to investigate changes in paleoceanographic conditions during Marine Isotope Stages 12-10. Sea ice was present over much of the Bering Sea during MIS 11, but today, none of the sites investigated are ever ice-covered. This suggests that sea ice regimes in the Bering Sea during MIS 11 were different to those of the Holocene. There are also regional differences in the response of sea ice to MIS 11 warming. At the Umnak Plateau, Southeastern Bering Sea, sea ice concentrations decline during deglaciation, but they remain high at the slope sites until Peak MIS 11. Sea ice re-advances over the Umnak Plateau during peak interglacial warmth, at the same time that it declines over the slope sites. Late MIS 11 is characterized by high concentrations of seasonal sea ice at the Umnak Plateau, whilst sea ice at the slope sites fluctuates between consolidated and unconsolidated ice cover. This east-west dichotomy may be explained by changes in the behavior of the Aleutian Low. Productivity increases dramatically during deglaciation due to increased upwelling and sea level rise bringing fresh nutrients into the oceans. This is characterized by increased diatom productivity, increased terrestrial carbon deposition, and laminations at all sites.

Alaska↗
USGS2026

Hydrothermal manganese-oxide mineralization of a carbonate ooze, Samoan hotspot region, South Pacific Ocean

Low-temperature hydrothermal manganese oxides occur throughout the global oceans. However, the hydrothermal replacement of a carbonate ooze by manganese oxides is described here for the first time. The 24 samples dredged from three locations around the Territory of American Samoa in the South Pacific Ocean include six samples with remnant carbonate and volcaniclastic sediments, which we refer to as “low Mn,” and 18 samples in which the mineralization is pervasive and has replaced most original sediment, termed “high Mn.” The 18 high-Mn samples exhibit a mean Mn content of 51 wt.%. Higher Li and Mn contents and lower Fe contents in the high-Mn samples indicate a hydrothermal origin and distinguish these samples from hydrogenetic ferromanganese crusts. Mn-oxide layers are up to 90 mm thick, some with columns to 44 mm long and 10 mm wide, the magnitude of which has not been described previously. Samples are composed of birnessite and 10 Å phyllomanganate minerals. Textures of the thickest Mn layers indicate mineralization below the seabed from ascending fluids during multiple hydrothermal pulses. Mineralization took place by complete to partial replacement and cementation of foraminiferal sediments intermixed with volcaniclastic sediments in varying amounts. Our results highlight the production of carbonate sediment-hosted hydrothermal Mn oxides from multiple hydrothermal sources within the Samoan volcanic chain. The potential extensive distribution on the regional scale of this newly described mineralization process and unique element enrichments raise questions about its broader distribution globally and potential importance to hydrothermal processes, element mass balance, and seabed mineral resources.

Geochemistry, Geophysics, Geosystems↗
USGS2026

Ground-motion simulations for the 2024 Mw 4.8 Tewksbury, New Jersey, earthquake

Ground-motion simulations of notable earthquakes in the central and eastern United States are limited and typically assume one-dimensional (1D) Earth structure. In this study, we use a three-dimensional (3D) seismic velocity model to better constrain the depth and focal mechanism of the April 5th, 2024, moment magnitude 4.8 Tewksbury earthquake and investigate the spatial variability of earthquake ground motions and the effects of nearby sedimentary basins. We perform earthquake ground-motion simulations up to 0.5 Hz using the 3D spectral-element wave-propagation solver SPECFEM3D over a region 280-km wide by 260-km long by 77-km deep. Topography and subsurface geophysical structure are assigned using the U.S. Geological Survey National Crustal Model with a minimum shear-wave velocity of 200 m/s. We use earthquake time series from 13 broadband seismic stations in the region that have a uniform azimuthal distribution and epicentral distances ranging from 76 to 131 km to compare with synthetics and explore the effects of 1D versus 3D seismic structure on focal mechanism and depth solutions. Ground-motion intensity metrics are also presented relative to the NGA-East ground-motion models (GMMs) currently used in seismic hazard assessments for the region. We find that the 3D model, which reveals a wide spatial variability of period-dependent ground motions, yields better predictions of earthquake ground motions relative to the 1D model and the NGA-East ergodic ground-motion model, with 76 percent reduction of residual variance in observed ground motions averaged over 3-, 5-, 7-, and 10-second periods. Use of the 3D model to solve for a focal mechanism yields a shallower focal depth at 4 km and a shallower east-dipping focal plane relative to the U.S. Geological Survey regional moment tensor and Global Centroid Moment Tensor. Our study demonstrates that use of 3D seismic velocity models can improve estimates of earthquake focal mechanisms, ground motions, and seismic hazard.

New Jersey↗
USGS2024

Developments in African industrial minerals for renewable energy

Introduction Africa is emerging as a leading source for minerals used in the manufacture of batteries for electric vehicles and in other renewable energy applications. New graphite, lithium, and rare-earth mines have or could be opened in African countries from 2017 through 2026. Estimates of production capacities for graphite, lithium, and rare-earth mines for 2023 and beyond are based upon supply-side assumptions, such as announced plans for new capacity construction and bankable feasibility studies, as well as projected trends that could affect current producing facilities in 2023 and planned new facilities projected to come online by 2026. Forward-looking information, including estimates of future production capacities, graphite flake distributions, and timing of the start of operations, are subject to risk factors and uncertainties that could cause actual events or results to differ significantly from expected outcomes. Projects listed in this report are presented as an indication of industry plans and are not a U.S. Geological Survey (USGS) prediction of what will take place. Only projects with planned startup dates are included in this report; ther graphite, lithium, and rare-earth projects in Africa without startup dates were known to be in various stages of development but are not included in this fact sheet.

Fact Sheet↗
USGS2024

From exploration to production: Understanding the development dynamics of lithium mining projects

Recently, there has been considerable recent controversy whether current and new lithium mines will be able to supply the rapidly growing needs of the electromobility transition. Mineral exploration projects are typically active for many years, and only some become operational mines. From exploration to production, the projects go through several stages of characterisation and evaluation. At each stage, decisions are made by companies and stakeholders to advance, continue or stop the project. This is a complex process, and even projects with very similar geological and technical characteristics may take very different trajectories, depending on external factors such as global market conditions and local regulatory environments. The present study investigates the dynamics of this process for lithium exploration projects. A global database of 397 lithium projects was compiled, covering their progression through major development stages between 2004 and 2022. Ordinal logistic regression was used for the statistical analysis of this data. Different explanatory variables were tested, including economic, geological, technical, and geographic factors, to identify the best predictors for project progress at each development stage. The results suggest an essential role for lithium carbonate prices, and a variable role for other factors at each stage. Critically, the already elapsed lead time and project economics, which are traditionally considered important for the prediction of the start-up of individual mines, do not appear to be relevant in all cases. The results provide important insights into the dynamics of lithium supply and may eventually allow more realistic forecasts to be made for future lithium market dynamics.

Resources Policy↗
USGS2025

Do Graviquakes exist?

The “Graviquake” model, proposed in 2015 as an alternative to the elastic dislocation model, posits that normal faults are passive features dominated by coseismic gravitational collapse into a dilated crustal wedge, and that normal faulting is fundamentally distinct from strike‐slip and reverse faulting. Developed using finite‐element modeling before the 2016 central Apennines earthquake sequence, the model was revamped based on interpreted Differential Interferometric Synthetic Aperture Radar data from these events and used as evidence for a gravitational collapse episode. However, this interpretation relies on miscalculated elevation changes and is not corroborated by independent geophysical and seismological observations. Our analysis exposes fundamental flaws in the Graviquake model. By assuming that faults are passive players, it underrepresents the dynamic role of strain accumulation and release in rocks adjacent to faults. The hypothesized rapid expulsion of overpressurized fluids appears inconsistent with observed diffusion rates and lacks supporting seismological evidence. Part of the uplifted–subsided volume imbalance is likely an artifact arising from data processing, and in part is a transient effect due to the delayed response of the lower crust. Moment tensor analyses detect no isotropic components indicative of gravitational collapse, and observed ground motion and stress‐drop levels remain fully consistent with elastic dislocation theory. In addition, finite‐element modeling of normal faulting replicates observed surface deformation without invoking a collapsing wedge. The Graviquake model proposes a representation of normal‐faulting mechanics that differs significantly from established models and observations. Gravity does play a role in normal faulting, but the elastic dislocation theory remains the definitive framework of fault mechanics. Reinterpreting the 2016 earthquakes as a cascade of gravitational episodes, based on incorrect data processing and modeling, fails to substantiate the Graviquake hypothesis. Persistence in advocating this model could mislead seismic hazard assessment and undermine our understanding of normal faulting.

Bulletin of the Seismological Society of America↗
USGS2026

Landslide volume estimation from seismic waveform features using a global catalog of seismogenic events

Seismic waves generated by large, rapid landslides encode information about the source and can be analyzed rapidly following an event. Even remote landslides can pose hazards to downstream communities, so rapid detection and characterization using existing seismic monitoring networks could be beneficial. In this study, we expand on past regionally limited work by presenting a globally applicable method for estimating landslide volume from seismic features that could be integrated into future landslide seismic monitoring frameworks. We train the model using multivariable linear regression and five seismic features derived from recordings of 129 landslide events of a range of styles and locations with independently estimated volumes. We present two preferred models, one that combines long‐period (LP) and high‐frequency (HF) features and one for use on smaller landslides without observed long‐period signals. We find that our best‐performing model, applicable to landslides larger than 100,000 m 3 with signals containing observable long‐period energy, requires only two features: LP (20–100 s) absolute maximum amplitude and HF (1–5 Hz) rise time (time between the signal start and the maximum envelope amplitude) and has an R 2 score of 0.79. This model predicted volumes within one order of magnitude for 55 out of 58 events. We find that this combination mitigates the trade‐off between mass and acceleration and other variations of landslide style that limit methods based on amplitude alone.

Seismological Research Letters↗
USGS2024

Geologic map of the southern Stillwater Range, Nevada

The southern Stillwater Range in west-central Nevada contains the western part of the Oligocene Stillwater-Clan Alpine caldera complex, which extends about 55 kilometers (km) east from the west side of the Stillwater Range to the northwestern Desatoya Mountains. The complex consists of at least seven nested ignimbrite calderas and subjacent plutonic rocks emplaced into a complex basement composed of Mesozoic metasedimentary and metavolcanic rocks and Cretaceous granitic plutons. The calderas formed during large-volume (100s to greater than (>) 2,500 cubic kilometers [km 3 ]) eruptions of silicic ignimbrites between about 30.4 and 25.1 million years before present (Ma). The Job Canyon and Poco Canyon calderas and the western part of the much larger Elevenmile Canyon caldera, and their plutonic roots, are exposed in the southern Stillwater Range. There, the caldera complex was steeply tilted during large-magnitude crustal extension in the middle Miocene, and further exhumed during the late Miocene to Holocene Basin and Range extension that formed the modern Stillwater Range. This tilted crustal section affords an exceptional opportunity to view structural cross sections of ignimbrite calderas and their plutonic roots to paleodepths as much as 9–10 km.

Nevada↗
USGS2025

Regional characterization of coal resources in the U.S. Gulf Coast

There is increasing interest in extracting critical minerals (CM), including rare earth elements (REE), from coals in the United States to address the overreliance on imported REE. The U.S. Gulf Coast and the Williston basins are the two major lignite-bearing basins within the country. Recent REE and CM studies of the lignite in these basins have indicated that the coals may be a viable source material for REE and CM extraction. To evaluate in-place coal as a potential source of REE and CM, the coal resources need to be quantified. This study presents the results of a regional analysis of the U.S. Gulf Coast lignite and bituminous coal resources that might be available as potential sources of REE and CM. The resource analysis used kriging methods to develop isopleth maps of cumulative coal thickness throughout the region using data from 31,181 drill holes and other data points. The estimated total coal resource in the Gulf Coast is about 83 billion metric tons in the upper 90 m (~ 300 ft) of the subsurface. Texas accounted for 40 percent (32 billion metric tons) of the total resource, followed by Mississippi (24 %, 20 billion metric tons), Louisiana (14 %, 12 billion metric tons), Tennessee (10 %, 8.5 billion metric tons), and Arkansas (6 %, 5.1 billion metric tons). The remaining states each accounted for less than 5 percent of the total resource. Georgia had the smallest resource estimated at 7 million metric tons. Here we report the first known state-wide lignite resource estimates for Georgia, Kentucky (820 million metric tons), and Missouri (1,800 million metric tons). A comparison of the results of this study with those of previous Gulf Coast and Williston Basin resource studies is difficult because each study used different data sources, assessment methodologies, overburden depths, and qualifying coal thicknesses. Coal-power electric generation has sharply decreased in past decades and mining of these coals for CM and REE could provide additional co-products such as activated carbon and other uses such as fertilizer (soil enhancer).

EarthArXiv↗
USGS2024

Are field observations of surface rupture useful? An example from the 2023 Mw 7.8 Pazarcık, Turkey (Türkiye), earthquake

Field investigations have long been an important component of the scientific response to surface‐faulting earthquakes. However, in light of advances in remote data and models, the question arises whether field‐based observations of surface rupture remain useful for understanding rupture processes and seismic hazards. We approach this question using a field‐based study of the central 2023 M w 7.8 Pazarcık, Turkey (Türkiye), earthquake rupture, at the intersection of the east Anatolian fault (EAF) and Narlı fault. Our field observations include the surface rupture expression and extent of the central EAF and northernmost Narlı fault in generally forested and steep terrain and 68 measurements of left‐lateral surface displacement. These data improve our understanding of the Pazarcık rupture complexity, resolve the surface geometry of the Narlı fault–EAF connection, and exhibit a clear (>2 m) change in surface displacement across this intersection zone that confirms remote‐based coseismic slip models. Our study shows that focusing field efforts in areas of obscured or low‐resolution remote data can yield essential data for refining rupture extent, documenting perishable on‐fault displacement, and improving postearthquake situational awareness. A comparison of similarly large‐magnitude continental surface‐rupturing earthquakes indicates that displacement uncertainties relate to a complex set of factors, including measurement methods, rupture complexity, and displacement magnitude. Our study validates the need for postearthquake field observations, which, when driven by clear motivating questions and knowledge of methodological strengths and limitations, provide high‐resolution rupture data that complement remote‐based models.

Pazarcık↗
USGS2025

Advancing current understanding of Martian impact-generated hydrothermal systems through novel coupled modeling: Insights from Gale, Jezero, and other craters

Impact-generated hydrothermal systems are considered potentially habitable environments on Mars, Earth, and other planetary bodies for microbial life. However, there is an ongoing debate regarding what geological features on Mars provide definitive evidence for such systems. Although earlier studies have modeled hydrothermal processes in Martian craters, they often lacked integration with shock physics hydrocodes to constrain initial impact conditions. The importance of this two-code coupling was demonstrated by successfully replicating alteration signatures in the Earth's Haughton impact structure. In this study, we use a similar two-code approach, combining the iSALE hydrocode with the HYDROTHERM hydrothermal model to simulate the full evolution of impact-generated hydrothermal systems. We apply this method to craters the size of Jezero (∼50 km) and Gale (∼154 km) in diameter. Although Jezero's interior is largely buried, our results align with hypothesized hydrothermal vents and alteration minerals near central uplifts in similarly sized exposed craters, such as Toro and Auki. Furthermore, our models correspond to alteration patterns observed by the Curiosity in the lower layers of Mount Sharp, which may represent remnants of impact-driven hydrothermal activity. A key finding is that these systems may persist much longer than previously estimated. Our simulations suggest that a Jezero-sized system could remain habitable for thermophiles for approximately 720,000 years, whereas a Gale-sized system could persist for nearly 2 million years. Additionally, simulations under unsaturated crustal conditions reveal that air-dominated near-surface layers can suppress vertical fluid flow, enabling deep subsurface alteration without producing detectable mineral signatures at the surface.

Journal of Geophysical Research - Planets↗
USGS2026

Site-specific amplifications in Northwestern Turkiye: A generic approach

In this study, we derive generic site amplification functions applicable to Northwestern Türkiye and follow guidance on site classifications established by the United States National Earthquake Hazards Reduction Program (NEHRP). We employ the one-dimensional (1-D) equivalent linear ground response analysis method and focus on recordings from a select suite of free-field strong motion (SM) stations. These particular SM stations are associated with a comprehensive geotechnical site conditions dataset comprising 76 shear-wave velocity profiles. Despite their varying resolutions and depths, this diversity allows for a more representative analysis across different site conditions, enhancing the robustness of our findings. For analyses, we utilize a robust set of global ground motion records, selected from both within and outside of Türkiye, to serve as strong and weak input bedrock motions. Site amplification is determined by propagating these bedrock records through 76 site-specific Afet ve Acil Durum Yönetimi Başkanlığı (AFAD) station profiles and calculating the spectral acceleration ratio between the ground surface and the input motion. Our analyses reveal substantial disparities between the amplification functions derived from 1-D site response analyses using strong and weak input motions. These disparities are central to our analysis and inform the subsequent comparison with site amplification functions reported in the literature. We compare the generic site amplification functions derived in this study with those reported in the literature for regions with similar geological and seismic conditions to Northwestern Türkiye. For example, site amplification functions for NEHRP Site Classes C and D have been documented for Greece and the United States utilizing frequency-dependent methods such as the quarter-wavelength approximation. Our findings reveal that the generic site amplification functions derived in this study exhibit differences in peak amplitudes and predominant frequencies compared to those in the literature, reflecting regional variations in geotechnical and seismic properties. This study represents an initial effort to formulate generic site amplification functions for Türkiye, with a particular emphasis on the Northwestern region. A thorough literature review indicated no prior studies have proposed such functions specifically for this area.

Northwestern Turkiye↗
USGS2026

Efficient physics‐informed ground‐motion simulations with reduced‐order models: CyberShake implications and high‐resolution site terms for southern San Andreas fault earthquakes

Recent advances in Probabilistic Seismic Hazard Analysis (PSHA) leverage physics‐based ground‐motion simulations to estimate seismic hazard, such as the CyberShake project. However, computational costs quickly escalate when performing PSHA for numerous faults or sites and can become prohibitively expensive. To reduce computational demands, CyberShake uses reciprocity and interpolates physics‐informed corrections from simulations conducted at fewer locations, but the accuracy of these interpolations remains poorly quantified. To quantify the interpolation accuracy, we derive high‐resolution, frequency‐dependent site terms for southern California and compare them with interpolated site terms using the CyberShake approach. We accomplish this by performing a set of earthquake point‐source simulations distributed along the nonplanar fault geometry for the southern San Andreas fault (SSAF) extending from Bombay Beach to Lake Hughes. Using SeisSol, we simulate three minutes of viscoelastic seismic wave propagation for these sources and store the horizontal‐component Green’s functions for 480,000 sites. We then use a scientific machine learning approach based on interpolated proper orthogonal decomposition to construct an accurate reduced‐order model of the Green’s functions to efficiently predict effective amplitude spectra (EAS) for finite‐source rupture models of SSAF earthquakes. Using minimum curvature interpolation with tension, as used in CyberShake, we compare the interpolated site terms against our high‐resolution site terms. We identify local discrepancies with EAS differing by up to a factor of approximately three. Furthermore, we identify locations where unexpectedly high or low ground motions are missed when using the interpolated dataset for these earthquakes. We estimate that our approach may be used within CyberShake to reduce the time‐to‐solution by a factor of 336 for the entire earthquake rupture forecast. Our analysis of physics‐based site terms provides more insight into the seismic hazard due to SSAF ruptures and guides future developments by combining high‐performance computing and reduced‐order modeling techniques for PSHA.

California↗
USGS2025

Paleoproterozoic vein graphite mineralization caused by decarbonation in the Ruby Range, Montana, USA

Hydrothermal graphite veins are a possible source for modern battery materials and require better understanding of their carbon source(s) and absolute timing to develop mapable criteria for exploration models. We present new observations of graphite vein and alteration paragenesis and U-Pb LA-ICP-MS titanite age data from the Ruby prospect, Montana, USA, that constrain mineralization timing and source. The graphite veins cut high-temperature metamorphic rocks of the lower Christensen Range suite and are associated with intense diopside (Di0.69Hd0.27Jo0.04) alteration of marble. The oldest titanite ages in fresh marble and partially altered calc-silicate gneiss are ca. 2,500 – 2,450 Ma, show elevated REE values, and Eu/Eu* <1.5, consistent with growth during early regional metamorphism. Titanite in diopside-graphite alteration, interpreted as part of the hydrothermal vein-forming episode, cluster around 1,750 Ma, are characterized by lower REE values, and show Eu/Eu* >2; suggesting a low fO 2 fluid generated from metamorphism during the Big Sky orogeny. Our paragenetic observations and titanite ages indicate graphite vein formation via skarnoid decarbonation reactions in marble late in regional orogenesis. Granulite-facies, carbonate-bearing, supracrustal rock terranes are thus favorable for hydrothermal graphite vein deposits.

Montana↗
USGS2025

Global patterns of coseismic landslide runout mobility differ from aseismic landslide trends

Coseismic landslides significantly contribute to human and economic losses during and immediately following earthquakes, yet very little data on the runout of such landslides exist. While well-established behavior of aseismic (e.g., hydrologically triggered) landslide runout mobility suggests strong correlation between landslide size and mobility, limited studies of coseismic landslide runout find conflicting mobility trends. We present a global dataset of runout lengths produced from a new automated method for estimating landslide runout, developed and validated using 1726 manually mapped landslides from five unique earthquakes. We then apply the automated runout tool to 23 global earthquake-induced landslide inventories, producing a compiled database of 73,665 measured and estimated runout lengths of coseismic landslides to assess mobility trends. We find a significant divergence between well-established aseismic mobility trends and that of coseismic landslides, with far greater scatter and more complex mobility patterns in earthquake-triggered landslides. As a function of landslide size, we observe global coseismic landslide mobility patterns are bilinear, becoming increasingly less mobile with increasing size above some threshold. This discordance between aseismic and coseismic landslide mobility may be a function of landslide type, kinematics, hydrology, and or setting that systematically differ between triggering mechanisms and should be explored in more depth to develop predictive models of these unique runout patterns. These results suggest hazard and risk models for coseismic landslides may significantly under-predict or over-predict impacts, depending on the size of triggered landslides.

Engineering Geology↗