Geology ReportsSearch

SEARCH · Geology Reports

Results for “Elementa: Science of the Anthropocene”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,687 records · Page 76Linked to original sources

Evaluation of submersible pressure transducers for streamflow monitoring in small streams

Compact streamgages requiring minimal infrastructure and equipped with submersible pressure transducers (PTs) are increasingly used to monitor small streams, yet disparate implementations obscure their accuracy under real-world conditions. This study isolated instrumentation-derived uncertainty in stage monitoring by co-locating various combinations of commercial vented and unvented PTs with seven U.S. Geological Survey (USGS) reference streamgages on small streams. Multi-year PT stage records from compact streamgages, collected and corrected following USGS protocols, were compared to concurrent reference observations. Vented PTs demonstrated an average measurement uncertainty of ±0.005 m and mean absolute percent error (MAPE) of ±0.2%. Unvented PTs exhibited higher uncertainty, averaging ±0.009 m and ±0.4% MAPE. Although both sensor types had stage errors up to ±0.3 m, 95% of vented PT and unvented PT observations were within 0.01 and 0.02 m of reference stage, respectively. Analysis of additional unvented PTs revealed stage errors of up to ±1.2% when using barometric sensors within 15 km of the in-water sensor. Propagation of stage error to discharge using reference rating models resulted in cumulative discharge MAPEs of ±4.5% for vented and ±5.5% for unvented PTs. These findings highlight PTs as practical alternatives to reference instrumentation when deployed with standardized procedures, potentially expanding access to reliable streamflow data.

conterminous United States

Debris-flow entrainment modelling under climate change: Considering antecedent moisture conditions along the flow path

Debris-flow volumes can increase along their flow path by entraining sediment stored in the channel bed and banks, thus also increasing hazard potential. Theoretical considerations, laboratory experiments and field investigations all indicate that the saturation conditions of the sediment along the flow path can greatly influence the amount of sediment entrained. However, this process is usually not considered for practical applications. This study aims to close this gap by combining runout and hydrological models into a predictive framework that is calibrated and tested using unique observations of sediment erosion and debris-flow properties available at a Swiss debris-flow observation station (Illgraben). To this end, hourly water input to the erodible channel is predicted using a simple, process-based hydrological model, and the resulting water saturation level in the upper sediment layer of the channel is modelled based on a Hortonian infiltration concept. Debris-flow entrainment is then predicted using the RAMMS debris-flow runout model. We find a strong correlation between the modelled saturation level of the sediment on the flow path and the channel-bed erodibility for single-surge debris-flow events with distinct fronts, indicating that the modelled water content is a good predictor for erosion simulated in RAMMS. Debris-flow properties with more complex flow behaviour (e.g., multiple surges or roll waves) are not as well predicted using this procedure, indicating that more physically complete models are necessary. Finally, we demonstrate how this modelling framework can be used for climate change impact assessment and show that earlier snowmelt may shift the peak of the debris-flow season to earlier in the year. Our novel modelling framework provides a plausible approach to reproduce saturation-dependent entrainment and thus better constrain event volumes for current and future hazard assessment.

Illgraben basin

Factors regulating the potential for freshwater mineral soil wetlands to function as natural climate solutions

There are increasing global efforts and initiatives aiming to tackle climate change and mitigate its impacts via natural climate solutions (NCS). Wetlands have been considered effective NCS given their capacity to sequester and retain atmospheric carbon dioxide (CO 2 ) while also providing a myriad of other ecosystem functions that can assist in mitigating the impacts of climate change. However, wetlands have a dual impact on climate, influencing the atmospheric concentrations of both CO 2 and methane (CH 4 ). The cooling effect associated with wetland CO 2 sequestration can be counterbalanced by the warming effect caused by CH 4 emissions from wetlands. The relative ability of wetlands to sequester CO 2 versus emit CH 4 is dependent on a suite of interacting physical, chemical, and biological factors, making it difficult to determine if/which wetlands are considered important NCS. The fact that wetlands are embedded in landscapes with surface and subsurface hydrological connections to other wetlands (i.e., wetlandscapes) that flow over and through geochemically active soils and sediments adds a new layer of complexity and poses further challenges to understanding wetland carbon sequestration and greenhouse gas fluxes at large spatial scales. Our review demonstrates how additional scientific advances are required to understand the driving mechanisms associated with wetland carbon cycling under different environmental conditions. It is vital to understand wetland functionality at both wetland and wetlandscape scales to effectively implement wetlands as NCS to maximize ecological, social, and economic benefits.

Wetlands

Pathways for potential exposure to onshore oil and gas wastewater: What we need to know to protect human health

Produced water is a chemically complex waste stream generated during oil and gas development. Roughly four trillion liters were generated onshore in the United States in 2021 (ALL Consulting, 2022, https://www.gwpc.org/wp-content/uploads/2021/09/2021_Produced_Water_Volumes.pdf ). Efforts are underway to expand historic uses of produced water to offset freshwater needs in water-stressed regions, avoid induced seismic activity associated with its disposal, and extract commodities. Understanding the potential exposures from current and proposed produced water uses and management practices can help to inform health-protective practices. This review summarizes what is known about potential human exposure to produced water from onshore oil and gas development in the United States. We synthesize 236 publications to create a conceptual model of potential human exposure that illustrates the current state of scientific inquiry and knowledge. Exposure to produced water can occur following its release to the environment through spills or leaks during its handling and management. Exposure can also arise from authorized releases, including permitted discharges to surface water, crop irrigation, and road treatment. Knowledge gaps include understanding the variable composition and toxicity of produced water released to the environment, the performance of treatment methods, migration pathways through the environment that can result in human exposure, and the significance of the exposures for human and ecosystem health. Reducing these uncertainties may help in realizing the benefits of produced water use while simultaneously protecting human health.

Environmental Health Perspectives

The National Map Corps—Federal Emergency Management Agency and Oak Ridge National Laboratory pilot project report

This report provides an overview of the U.S. Geological Survey National Map Corps —Federal Emergency Management Agency and Oak Ridge National Laboratory pilot project in St. James Parish, Louisiana, that began in February 2024 and ended at the end of March 2024. The project used the power of The National Map Corps’ volunteer community to improve building classifications in the original Federal Emergency Management Agency’s U.S.A. Structures dataset. The report highlights the project’s completion and details the work and results achieved through a collaborative effort to enhance geospatial data quality and utility.

Open-File Report

Case definitions for wildlife diseases

Welcome to the first manual of “Case Definitions for Wildlife Diseases,” a “living” electronic publication. The plan is to add and update this manual’s case definitions periodically as warranted; thus, this manual will never be completed, and readers should download the latest versions of specific chapters (that is, definitions) when available. Constructive suggestions from readers are welcome and will help guide adjustments as this project progresses. The purpose of this manual is to provide case definitions for selected diseases of importance to wildlife in Canada and the United States. Case definitions provide standard sets of criteria for classifying the degree of certainty of a particular diagnosis and help improve surveillance data quality and comparability. Better data and standardization allow for improved data sharing, which increases geographic and species surveillance coverage and permits more robust analyses. The definitions included in this manual have been developed by veterinary pathologists, epidemiologists, and wildlife biologists primarily from the U.S. Geological Survey National Wildlife Health Center (NWHC) and Canadian Wildlife Health Cooperative (CWHC). Pathologists from each organization reviewed and finalized the definitions. Each case definition has been peer reviewed by two scientific experts before publication. This manual begins with the case definition template. This generic template includes four sections: “Individual, Place, and Time Criteria for Diagnosis and Testing,” “Field Criteria for Diagnosis,” “Laboratory Criteria for Diagnosis,” and “Epidemiological Linkage Criteria for Diagnosis” and can be used to guide development of new case definitions. Information in each section is then combined to provide an overall case classification. Disease diagnoses are classified as “Confirmed,” “Presumptive,” or “Suspected;” and evidence of a pathogen or toxin is classified as “Exposed” or “Present/Detected.” Each subsequent chapter is then a case definition for a specific disease of wildlife, and infectious and non-infectious diseases are included.

Techniques and Methods

Identifying transportation data and system needs for a Federal lands transportation data platform

Executive Summary Modern transportation and land-use planning efforts include information from many sources to address topics such as safety, efficiency, commercial, and social needs. This wide breadth of topics provides opportunities for collaboration and development of common tools for diverse users. In many cases, different information systems provide the spatial data and geographic content necessary for transportation and land-use planners to consider multiple lines of evidence. The Federal Highway Administration Office of Federal Lands Highway (FLH) and Federal Land Management Agency partners use detailed spatial and quantitative data to inform transportation decisions. However, logistic challenges to data sharing exist because data are often managed by separate agencies; data-exchange frameworks and interagency data agreements are insufficient; and consistency from aggregated data requires maintenance, coordination, and supporting infrastructure. The FLH and U.S. Geological Survey collaboratively examined (1) use and availability of spatial data for transportation planning and (2) a possible mechanism to use more shared and consistent data in a common planning environment. The goals of this collaborative effort were to describe data needs from the perspective of planners and to identify opportunities for shared data resources. Results presented here focus on two workshops and a subsequent investigation of data and tools available from partner agencies. The objectives of this report are to (1) describe information used in transportation planning with geographic data; (2) identify spatially explicit data that inform transportation plans and could be shared among all partners; and (3) describe current platforms, planning and administrative opportunities, and potential barriers to developing an integrated planning tool. Key information and data needs were identified in three major classes: system, user, and influential factors. System data are parts of the transportation network and information about the condition of individual segments and the network. User data provide details about the function of the system and insights into potential needs; for example, user trips between source and destinations inform road and network demands that can lead to congestion and safety issues (in the future, user data might also include scenarios and projections based on land-use plans). Influential data represent social and environmental factors that influence transit demands and network conditions. These factors could be popular locations or seasonal events that influence demand and congestion; wildlife habitat or migration intersections that affect safety and management priorities; or geologic features that influence hazards, maintenance, and safety. Responses described here provide specific information for web-tool design and give a framework for interagency communication and cooperation to address specific information needs for integrated planning. Existing web-mapping and web-services, and the data that inform them, are also described. Commonly, these data are created and published by one agency, and the core users are outside of that agency; for example, threatened species distributions are published by the U.S. Fish and Wildlife Service for consideration by planners in advance of National Environmental Policy Act (42 U.S.C. 4321 et seq.) evaluation. This report is provided to inform FLH leaders and Federal Land Management Agency partners by articulating user needs and requirements for integrated planning tool(s). Programmers creating a secure web-based data-sharing platform (with data-viewing, -analysis and -download functions) can use the information presented here to organize data and user interfaces. This integrated perspective can help FLH and Federal Land Management Agency partners develop transportation networks that better serve the needs of people in local communities and across States and the Nation.

Open-File Report

Critical Minerals in Ores (CMiO) database

Critical minerals are commodities essential to modern industrial and strategic technologies and are highly vulnerable to supply chain disruption. The Critical Minerals Mapping Initiative (CMMI) is a collaboration among the U.S. Geological Survey (USGS), the Geological Survey of Canada, and Geoscience Australia that aims to deepen global understanding of where critical minerals are located. A key output of this initiative is the Critical Minerals in Ores (CMiO) database that is advancing our collective understanding of critical minerals distributions. For instance, publicly available data on the concentrations of many critical minerals are sparse because these commodities can only be produced in small, yet essential, quantities compared to the primary commodities like copper and zinc. The CMiO database helps bridge this gap by offering high-quality, multielement geochemical data from a wide variety of critical mineral-bearing deposits around the world. Importantly, it uses a novel consensus deposit environment, group, and type classification scheme developed by the agencies that allows comparisons among ore deposits from different regions. The CMiO database contains geochemical data for more than 20,000 samples from more than 100 deposit types comprising 10 deposit environments.

Fact Sheet

Site-specific amplifications in Northwestern Turkiye: A generic approach

In this study, we derive generic site amplification functions applicable to Northwestern Türkiye and follow guidance on site classifications established by the United States National Earthquake Hazards Reduction Program (NEHRP). We employ the one-dimensional (1-D) equivalent linear ground response analysis method and focus on recordings from a select suite of free-field strong motion (SM) stations. These particular SM stations are associated with a comprehensive geotechnical site conditions dataset comprising 76 shear-wave velocity profiles. Despite their varying resolutions and depths, this diversity allows for a more representative analysis across different site conditions, enhancing the robustness of our findings. For analyses, we utilize a robust set of global ground motion records, selected from both within and outside of Türkiye, to serve as strong and weak input bedrock motions. Site amplification is determined by propagating these bedrock records through 76 site-specific Afet ve Acil Durum Yönetimi Başkanlığı (AFAD) station profiles and calculating the spectral acceleration ratio between the ground surface and the input motion. Our analyses reveal substantial disparities between the amplification functions derived from 1-D site response analyses using strong and weak input motions. These disparities are central to our analysis and inform the subsequent comparison with site amplification functions reported in the literature. We compare the generic site amplification functions derived in this study with those reported in the literature for regions with similar geological and seismic conditions to Northwestern Türkiye. For example, site amplification functions for NEHRP Site Classes C and D have been documented for Greece and the United States utilizing frequency-dependent methods such as the quarter-wavelength approximation. Our findings reveal that the generic site amplification functions derived in this study exhibit differences in peak amplitudes and predominant frequencies compared to those in the literature, reflecting regional variations in geotechnical and seismic properties. This study represents an initial effort to formulate generic site amplification functions for Türkiye, with a particular emphasis on the Northwestern region. A thorough literature review indicated no prior studies have proposed such functions specifically for this area.

Northwestern Turkiye

The 2023 Alaska National Seismic Hazard Model

US Geological Survey (USGS) National Seismic Hazard Models (NSHMs) are used extensively for seismic design regulations in the United States and earthquake scenario development, as well as risk assessment and mitigation for both buildings and infrastructure. This 2023 update of the long-term, time-independent Alaska NSHM includes substantial changes to both the earthquake rupture forecast (ERF) and ground motion models (GMMs). The ERF includes numerous additions to the finite-fault model, considers two deformation models, and introduces updated declustering and smoothing algorithms in the gridded background seismicity model. For the Alaska–Aleutian subduction zone, megathrust earthquakes occur on an updated structural and segmentation model, and the moment magnitude (M) 8+ rupture and rate model include a logic tree branch that considers slip rates derived from geodetic models of interface coupling. The megathrust model considers multiple models of down-dip width, and magnitudes are computed using newly developed scaling relations. For subduction intraslab events and subduction interface events with M < 7, the 2023 update uses a smoothed seismicity model with rupture depths derived from Slab2. The 2023 model updates GMMs in all tectonic settings using the recently published Next Generation Attenuation Subduction (NGA-Sub) GMMs for subduction interface and intraslab events, and the NGA-West2 GMMs for active crustal settings. Collectively, additions and updates to the Alaska NSHM result in hazard increases across most of south-central Alaska relative to the previous model, published in 2007. These changes are primarily due to the adoption of updated rate models for the large-magnitude interface events and the NGA-Sub GMMs that have much higher aleatory variability (sigma), consistent with global observations, and that include models of epistemic uncertainty.

Alaska

Uranium—Deposits, production and resources, market dynamics, and supply chain risks

Introduction Interest in nuclear power for the generation of electricity has risen with the increase in the need for more diverse baseload power, enhanced energy security, and the development of new technologies, such as small modular reactors (SMRs), which could provide power for remote areas, industrial applications, and artificial intelligence (AI) data centers. In 2024, the U.S. Department of Energy received $2.7 billion in congressional funding to bolster the domestic uranium production and nuclear fuel supply chain and address reliance on imports from foreign suppliers. In 2025, the U.S. Government issued several Executive and Secretary’s orders aimed at revitalizing the U.S. nuclear sector. If SMRs are to be as widely deployed in the United States and worldwide as envisioned, demand for uranium (nuclear reactor fuel) will likely increase. After the Fukushima nuclear accident in 2011, the market spot price of uranium began a decline, followed by a decrease in U.S. and global uranium exploration and mine development expenditures that led to a uranium supply deficit until 2020, when prices started to recover, prompting a resurgence in uranium exploration and development. In January of 2024, the uranium spot price rose to a 17-year high $106 (U.S. dollars) per pound of U3O8 (triuranium oxide, commonly known as “yellowcake”), which is expected to increase uranium exploration, mine development, and uranium production domestically and worldwide.

Fact Sheet

Computational electromagnetic geophysics for groundwater system studies: A review on established practices and recent advances

Identifying effective solutions for locating groundwater resources and ensuring the quality of drinking water is increasingly urgent, given the challenges posed by climate change and population growth. This review investigates electromagnetic geophysical imaging techniques, in both time- and frequency-domain, that can provide valuable insights for groundwater assessment. We explore computational electromagnetic methods used to evaluate electromagnetic data and several recent hydrogeophysical case studies. As open-source frameworks for modeling electromagnetic geophysical problems become available, a broader range of researchers can interpret their data with computationally advanced software. We provide an overview of documented open-source codes for evaluating electromagnetic data and analyze various hydrological targets in relation to their electromagnetic surveying technique and the computational method applied. Furthermore, we evaluate the potential of advanced computational techniques, including three-dimensional modeling, non-deterministic inversion and machine learning, to couple geophysical with numerical groundwater modeling and apply it in groundwater system studies. Despite obstacles such as complexity and resource demands, our findings indicate that the quantification and integration of predictive uncertainties from both electromagnetic and hydrological data and simulations would significantly improve the reliability of hydrogeophysical models. This can lead to a deeper understanding of groundwater systems and improved management practices.

Journal of Hydrology

Northern bobwhites select for native grasses on working grazing land

Northern bobwhite ( Colinus virginianus ; bobwhite) populations have experienced an 85% decline across most of its range since the 1960s. The most drastic decreases have been in the southeastern United States where biologists attribute the decline to widespread habitat loss, including conversion of native grasslands to tall fescue ( Lolium arundinaceum ) and other exotic cool-season grass (CSG) pasture and hayfields. Including agricultural lands in conservation programs could improve habitat conditions on a regional scale. One working-lands conservation strategy involves the use of native warm-season grasses (NWSGs) rather than cool-season exotic grasses as economically viable cattle forage. To evaluate this management practice for creating bobwhite habitat, we conducted a field study on a bobwhite population in eastern Kentucky, USA, where grazed NWSG and burned NWSG fields were adjacent to exotic grazed and exotic hayed CSG fields. Between April 2019 and October 2022, we used radio telemetry to track bobwhites to evaluate resource selection at second- and third-order scales. Bobwhites used traditionally managed CSGs less than would be expected by chance at the second-order scale in both breeding and non-breeding seasons. Bobwhite use of grazed NWSG and burned NWSG was greater than would be expected by chance at the second-order scale in both breeding and non-breeding seasons. Similarly, at the third-order scale, bobwhites used CSGs less than would be expected by chance, whereas NWSGs and woody stems were used more than by chance alone. Our study suggests that bobwhites select NWSGs at multiple spatial scales despite broad-scale availability of managed exotic CSGs. Under a working-lands framework, the integration of NWSGs into working lands could create bobwhite habitat in the southeastern United States, especially if woody stems are present.

Kentucky

Deep groundwater total dissolved solids mapping in the Dakota Group, Williston Basin, USA

Growing concern about the quantity of available freshwater around the world has led to interest in surveying groundwater total dissolved solids (TDS) below water well depths. Deep TDS has not been systematically mapped, and there is much to learn about the distribution and controls on deeper groundwater. In sedimentary basins across the United States, groundwater resources often overlie hydrocarbon resources, providing an opportunity to use borehole geophysical data collected for hydrocarbons to characterize groundwater and pore space resources. This study adapts a recently developed subsurface geostatistical and geophysical modeling approach to continuously map groundwater TDS, porosity, and temperature in the Dakota Group of the Williston Basin—an undercharacterized regional aquifer system overlying deeper hydrocarbon reservoirs. Groundwater TDS in the Dakota Group ranges from approximately 4800 to 26,900 mg/L. TDS patterns are stratified with higher TDS in the lower and upper Dakota Group, and relatively lower TDS in the middle Dakota Group. The lower TDS in the middle zone may represent a preferential regional flow path for lower-TDS meteoric recharge from the west. The alternating pattern of TDS may also be evidence of higher-TDS inflows into the Dakota Group from underlying and potentially from overlying aquifers. Porosity is lower near the center of the Williston Basin and tends to be higher to the east, which may be related to grain size distributions. The new regional TDS and porosity modeling serves as a quantitative reference for water users and provides supporting evidence for hypotheses on Dakota Group recharge.

Montana, North Dakota, South Dakota

Groundwater-level elevations in the Denver Basin bedrock aquifers and Upper Black Squirrel Creek alluvial aquifer, El Paso County, Colorado, 2021–24

El Paso County is the second-most populous county in Colorado and is projected to grow another 15 percent by 2030. Within El Paso County is the Upper Black Squirrel Creek Designated Groundwater Basin (Black Squirrel Basin), an area where surface water is scarce and water users rely primarily on groundwater from five different aquifers (the Upper Black Squirrel Creek alluvial aquifer and four bedrock aquifers within the Denver Basin aquifer system: the lower Dawson, Denver, Arapahoe, and Laramie-Fox Hills aquifers) to meet their needs. Currently (2024), land within the Upper Black Squirrel Creek Basin is primarily used for rural grazing and agriculture; however, municipal development is ongoing. In 2021, the U.S. Geological Survey, in cooperation with the Upper Black Squirrel Creek Ground Water Management District, began a study to establish a baseline dataset and assess the groundwater resources of the aquifers within the Black Squirrel Basin. A network of 39 wells was established in 2021; discrete groundwater-level measurements were made bimonthly. Nine of the 39 wells were equipped with pressure transducers to record hourly groundwater-level data. Seven wells had statistically significant seasonal trends, and trends at 3 wells were negative. For the discrete data, 16 wells had a significant trend for the study period, and 4 wells had negative trends. For the time-series data, 8 wells had significant trends, and 3 wells had negative trends. Potentiometric surface maps were created for this study using discrete, static groundwater levels measured in April 2023. These maps showed the estimated groundwater flow direction from the north-northwest to the south-southeast in the alluvial aquifer and from the northwest to the east-southeast for the lower Dawson and Denver aquifer wells. This study indicates the potential benefit of monitoring wells in the areas near municipal pumping. Additional monitoring could lead to a better understanding of connectivity between aquifers and be an important tool for assessing long-term sustainability of groundwater use.

Colorado

Paleoproterozoic vein graphite mineralization caused by decarbonation in the Ruby Range, Montana, USA

Hydrothermal graphite veins are a possible source for modern battery materials and require better understanding of their carbon source(s) and absolute timing to develop mapable criteria for exploration models. We present new observations of graphite vein and alteration paragenesis and U-Pb LA-ICP-MS titanite age data from the Ruby prospect, Montana, USA, that constrain mineralization timing and source. The graphite veins cut high-temperature metamorphic rocks of the lower Christensen Range suite and are associated with intense diopside (Di0.69Hd0.27Jo0.04) alteration of marble. The oldest titanite ages in fresh marble and partially altered calc-silicate gneiss are ca. 2,500 – 2,450 Ma, show elevated REE values, and Eu/Eu* <1.5, consistent with growth during early regional metamorphism. Titanite in diopside-graphite alteration, interpreted as part of the hydrothermal vein-forming episode, cluster around 1,750 Ma, are characterized by lower REE values, and show Eu/Eu* >2; suggesting a low fO 2 fluid generated from metamorphism during the Big Sky orogeny. Our paragenetic observations and titanite ages indicate graphite vein formation via skarnoid decarbonation reactions in marble late in regional orogenesis. Granulite-facies, carbonate-bearing, supracrustal rock terranes are thus favorable for hydrothermal graphite vein deposits.

Montana

Potential warming-induced changes in stream water sources between proglacial and non-glacial streams, south-central Alaska

Snow and ice-melt are essential for global water resources. Rising air temperatures are causing vegetation encroachment and shrubification of previously snow- and ice-covered landscapes, and precipitation regimes are changing. Collectively, these changes will likely affect the hydrology of mountain environments, although the exact ways in which the hydrology will change are poorly understood. Changing source waters (i.e., the proportion of ice-melt, snowmelt, rain and groundwater) affect the timing and magnitude of streamflow and affect stream temperature, sediment, solute and nutrient fluxes. We investigate spatial and seasonal source water contributions across sub-watersheds of the Nellie Juan River watershed on Alaska's Kenai Peninsula, which differ in glacier cover, elevation and land cover, using a space-for-time approach. To do so, we use a three-endmember mixing model to quantify the contribution of rain, snow/ice-melt and deep groundwater. We show that snow/ice-melt peak later in proglacial streams compared to non-glacial streams. Endmember contributions in non-glacial streams generally vary with elevation and season. We also found that groundwater is a major contributor to streamflow across the study area, contributing between 12% and 47% seasonally, and may become increasingly important as snowpack and ice-melt decrease. This research characterises the shift from a glacierised to a deglaciating landscape through the lens of source water contribution. Broadly, these findings could help improve understanding of how water resources in glacierised watersheds are affected by warming air temperatures.

Alaska

Increased flood exposure in the Pacific Northwest following earthquake-driven subsidence and sea-level rise

Climate-driven sea-level rise is increasing the frequency of coastal flooding worldwide, exacerbated locally by factors like land subsidence from groundwater and resource extraction. However, a process rarely considered in future sea-level rise scenarios is sudden (over minutes) land subsidence associated with great (>M8) earthquakes, which can exceed 1 m. Along the Washington, Oregon, and northern California coasts, the next great Cascadia subduction zone earthquake could cause up to 2 m of sudden coastal subsidence, dramatically raising sea level, expanding floodplains, and increasing the flood risk to local communities. Here, we quantify the potential expansion of the 1% floodplain (i.e., the area with an annual flood risk of 1%) under low (~0.5 m), medium (~1 m), and high (~2 m) earthquake-driven subsidence scenarios at 24 Cascadia estuaries. If a great earthquake occurred today, floodplains could expand by 90 km 2 (low), 160 km 2 (medium), or 300 km 2 (high subsidence), more than doubling the flooding exposure of residents, structures, and roads under the high subsidence scenario. By 2100, when climate-driven sea-level rise will compound the hazard, a great earthquake could expand floodplains by 170 km 2 (low), 240 km 2 (medium), or 370 km 2 (high subsidence), more than tripling the flooding exposure of residents, structures, and roads under the high subsidence scenario compared to the 2023 floodplain. Our findings can support decision-makers and coastal communities along the Cascadia subduction zone as they prepare for compound hazards from the earthquake cycle and climate-driven sea-level rise and provide critical insights for tectonically active coastlines globally.

California, Oregon, Washington