Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75Linked to original sources
USGS2007

Thermal evolution and exhumation of deep-level batholithic exposures, southernmost Sierra Nevada, California

The Tehachapi complex lies at the southern end of the Sierra Nevada batholith adjacent to the Neogene-Quaternary Garlock fault. The complex is composed principally of high-pressure (8-10 kbar) Cretaceous batholithic rocks, and it represents the deepest exposed levels of a continuous oblique crustal section through the southern Sierra Nevada batholith. Over the southern ???100 km of this section, structural/petrologic continuity and geochronological data indicate that ???35 km of felsic to intermediate-composition crust was generated by copious arc magmatism primarily between 105 and 99 Ma. In the Tehachapi complex, these batholithic rocks intrude and are bounded to the west by similar-composition gneissic-textured high-pressure batholithic rocks emplaced at ca. 115-110 Ma. This lower crustal complex is bounded below by a regional thrust system, which in Late Cretaceous time tectonically eroded the underlying mantle lithosphere, and in series displaced and underplated the Rand Schist subduction assemblage by low-angle slip from the outboard Franciscan trench. Geophysical and mantle xenolith studies indicate that the remnants of this shallow subduction thrust descend northward through the crust and into the mantle, leaving the mantle lithosphere intact beneath the greater Sierra Nevada batholith. This north-dipping regional structure records an inflection in the Farallon plate, which was segmented into a shallow subduc-tion trajectory to the south and a normal steeper trajectory to the north. We combine new and published data from a broad spectrum of thermochronom-eters that together form a coherent data array constraining the thermal evolution of the complex. Integration of these data with published thermobarometric and petro-genetic data also constrains the tectonically driven decompression and exhumation history of the complex. The timing of arc magmatic construction of the complex, as denoted above, is resolved by a large body of U/Pb zircon ages. High-confidence thermochronometric data track a single retrogressing path commencing from widely established solidus conditions at ca. 100 Ma, and traversing through time-temperature space as follows: (1) Sm/Nd garnet ???770-680 ??C at ca. 102-95 Ma, (2) U/Pb titanite ???750-600 ??C at ca. 102-95 Ma, (3) Ar/Ar hornblende ???570-490 ??C at ca. 94-91 Ma, (4) Rb/Sr biotite ???390-260 ??C at ca. 90-86 Ma, (5) Ar/Ar biotite ???320-240 ??C at ca. 88-85 Ma, and (6) (U-Th)/He zircon ???230-170 ??C at ca. 88-83 Ma. Additional stratigraphic constraints place the complex at surface conditions in Paleocene-early Eocene time (ca. 66-55 Ma). Integration of these results with thermobarometric and structural data, including published data on the underlying Rand Schist, reveals a profound tectonic event whereby rapid cooling and exhumation at rates potentially as high as 100s ??C/m.y. and >5 mm/yr initiated at ca. 98 Ma and peaked between 96 and 94 Ma. Between 93 and 85 Ma, cooling rates remained high, but decelerated with or without significant exhumation. Subsequent cooling and exhumation rates are poorly constrained but were much slower and ultimately resulted in Paleocene-Eocene surface exposure. Initial rapid exhumation and cooling are hypothesized to have been driven by abrupt flattening in the corresponding segment of the Farallon plate and the resulting tectonic erosion of the underlying mantle lithosphere. Protolith as well as meta-morphic pressure-temperature and age constraints on the Rand Schist indicate its rapid low-angle subduction between 93 and 88 Ma. Comparison of the Rand Schist and Tehachapi complex pressure-temperature-time paths in conjunction with structural relations strongly suggest that the schist ascended the equivalent of ???4 kbar relative to the Tehachapi complex by low-angle normal displacement along the Rand fault between 88 and 80 Ma to attain its current underplated structural position. Such extensional tectonism is hypothesized to have been driven by slab rollback

Conference Paper↗
USGS2009

Recent faulting in the Gulf of Santa Catalina: San Diego to Dana Point

We interpret seismic-reflection profiles to determine the location and offset mode of Quaternary offshore faults beneath the Gulf of Santa Catalina in the inner California Continental Borderland. These faults are primarily northwest-trending, right-lateral, strike-slip faults, and are in the offshore Rose Canyon-Newport-Inglewood, Coronado Bank, Palos Verdes, and San Diego Trough fault zones. In addition we describe a suite of faults imaged at the base of the continental slope between Dana Point and Del Mar, California. Our new interpretations are based on high-resolution, multichannel seismic (MCS), as well as very high resolution Huntec and GeoPulse seismic-reflection profiles collected by the U.S. Geological Survey from 1998 to 2000 and MCS data collected by WesternGeco in 1975 and 1981, which have recently been made publicly available. Between La Jolla and Newport Beach, California, the Rose Canyon and Newport-Inglewood fault zones are multistranded and generally underlie the shelf break. The Rose Canyon fault zone has a more northerly strike; a left bend in the fault zone is required to connect with the Newport-Inglewood fault zone. A prominent active anticline at mid-slope depths (300-400 m) is imaged seaward of where the Rose Canyon fault zone merges with the Newport-Inglewood fault zone. The Coronado Bank fault zone is a steeply dipping, northwest-trending zone consisting of multiple strands that are imaged from south of the U.S.-Mexico border to offshore of San Mateo Point. South of the La Jolla fan valley, the Coronado Bank fault zone is primarily transtensional; this section of the fault zone ends at the La Jolla fan valley in a series of horsetail splays. The northern section of the Coronado Bank fault zone is less well developed. North of the La Jolla fan valley, the Coronado Bank fault zone forms a positive flower structure that can be mapped at least as far north as Oceanside, a distance of ??35 km. However, north of Oceanside, the Coronado Bank fault zone is more discontinuous and in places has no strong physiographic expression. The San Diego Trough fault zone consists of one or two well-defined linear fault strands that cut through the center of the San Diego Trough and strike N30??W. North of the La Jolla fan valley, this fault zone steps to the west and is composed of up to four fault strands. At the base of the continental slope, faults that show recency of movement include the San Onofre fault and reverse, oblique-slip faulting associated with the San Mateo and Carlsbad faults. In addition, the low-angle Oceanside detachment fault is imaged beneath much of the continental slope, although reflectors associated with the detachment are more prominent in the area directly offshore of San Mateo Point. North of San Mateo Point, the Oceanside fault is imaged as a northeast-dipping detachment surface with prominent folds deforming hanging-wall strata. South of San Mateo point, reflectors associated with the Oceanside detachment are often discontinuous with variable dip as imaged in WesternGeco MCS data. Recent motion along the Oceanside detachment as a reactivated thrust fault appears to be limited primarily to the area between Dana and San Mateo Points. Farther south, offshore of Carlsbad, an additional area of folding associated with the Carlsbad fault also is imaged near the base of the slope. These folds coincide with the intersection of a narrow subsurface ridge that trends at a high angle to and intersects the base of the continental slope. The complex pattern of faulting observed along the base of the continental slope associated with the San Mateo, San Onofre, and Carlsbad fault zones may be the result of block rotation. We propose that the clockwise rotation of a small crustal block between the Newport-Inglewood-Rose Canyon and Coronado Bank fault zones accounts for the localized enhanced folding along the Gulf of Santa Catalina margin. Prominent subsurface basement ridges imaged offshore of Dana Point m

Special Paper of the Geological Society of America↗
USGS2010

Geometry and kinematics of the eastern Lake Mead fault system in the Virgin Mountains, Nevada and Arizona

The Lake Mead fault system is a northeast-striking, 130-km-long zone of left-slip in the southeast Great Basin, active from before 16 Ma to Quaternary time. The northeast end of the Lake Mead fault system in the Virgin Mountains of southeast Nevada and northwest Arizona forms a partitioned strain field comprising kinematically linked northeast-striking left-lateral faults, north-striking normal faults, and northwest-striking right-lateral faults. Major faults bound large structural blocks whose internal strain reflects their position within a left step-over of the left-lateral faults. Two north-striking large-displacement normal faults, the Lakeside Mine segment of the South Virgin–White Hills detachment fault and the Piedmont fault, intersect the left step-over from the southwest and northeast, respectively. The left step-over in the Lake Mead fault system therefore corresponds to a right-step in the regional normal fault system. Within the left step-over, displacement transfer between the left-lateral faults and linked normal faults occurs near their junctions, where the left-lateral faults become oblique and normal fault displacement decreases away from the junction. Southward from the center of the step-over in the Virgin Mountains, down-to-the-west normal faults splay northward from left-lateral faults, whereas north and east of the center, down-to-the-east normal faults splay southward from left-lateral faults. Minimum slip is thus in the central part of the left step-over, between east-directed slip to the north and west-directed slip to the south. Attenuation faults parallel or subparallel to bedding cut Lower Paleozoic rocks and are inferred to be early structures that accommodated footwall uplift during the initial stages of extension. Fault-slip data indicate oblique extensional strain within the left step-over in the South Virgin Mountains, manifested as east-west extension; shortening is partitioned between vertical for extension-dominated structural blocks and south-directed for strike-slip faults. Strike-slip faults are oblique to the extension direction due to structural inheritance from NE-striking fabrics in Proterozoic crystalline basement rocks. We hypothesize that (1) during early phases of deformation oblique extension was partitioned to form east-west–extended domains bounded by left-lateral faults of the Lake Mead fault system, from ca. 16 to 14 Ma. (2) Beginning ca. 13 Ma, increased south-directed shortening impinged on the Virgin Mountains and forced uplift, faulting, and overturning along the north and west side of the Virgin Mountains. (3) By ca. 10 Ma, initiation of the younger Hen Spring to Hamblin Bay fault segment of the Lake Mead fault system accommodated westward tectonic escape, and the focus of south-directed shortening transferred to the western Lake Mead region. The shift from early partitioned oblique extension to south-directed shortening may have resulted from initiation of right-lateral shear of the eastern Walker Lane to the west coupled with left-lateral shear along the eastern margin of the Great Basin.

Arizona, Nevada↗
USGS2013

Late Miocene-Pleistocene evolution of a Rio Grande rift subbasin, Sunshine Valley-Costilla Plain, San Luis Basin, New Mexico and Colorado

The Sunshine Valley-Costilla Plain, a structural subbasin of the greater San Luis Basin of the northern Rio Grande rift, is bounded to the north and south by the San Luis Hills and the Red River fault zone, respectively. Surficial mapping, neotectonic investigations, geochronology, and geophysics demonstrate that the structural, volcanic, and geomorphic evolution of the basin involves the intermingling of climatic cycles and spatially and temporally varying tectonic activity of the Rio Grande rift system. Tectonic activity has transferred between range-bounding and intrabasin faults creating relict landforms of higher tectonic-activity rates along the mountain-piedmont junction. Pliocene–Pleistocene average long-term slip rates along the southern Sangre de Cristo fault zone range between 0.1 and 0.2 mm/year with late Pleistocene slip rates approximately half (0.06 mm/year) of the longer Quaternary slip rate. During the late Pleistocene, climatic influences have been dominant over tectonic influences on mountain-front geomorphic processes. Geomorphic evidence suggests that this once-closed subbasin was integrated into the Rio Grande prior to the integration of the once-closed northern San Luis Basin, north of the San Luis Hills, Colorado; however, deep canyon incision, north of the Red River and south of the San Luis Hills, initiated relatively coeval to the integration of the northern San Luis Basin. Long-term projections of slip rates applied to a 1.6 km basin depth defined from geophysical modeling suggests that rifting initiated within this subbasin between 20 and 10 Ma. Geologic mapping and geophysical interpretations reveal a complex network of northwest-, northeast-, and north-south–trending faults. Northwest- and northeast-trending faults show dual polarity and are crosscut by north-south– trending faults. This structural model possibly provides an analog for how some intracontinental rift structures evolve through time.

Colorado, New Mexico↗
USGS2013

Deformational and erosional history for the Abiquiu and contiguous area, north-central New Mexico: Implications for formation of the Abiquiu embayment and a discussion of new geochronological and geochemical analysis

Geologic mapping, age determinations, and geochemistry of rocks exposed in the Abiquiu area of the Abiquiu embayment of the Rio Grande rift, north-central New Mexico, provide data to determine fault-slip and incision rates. Vertical-slip rates for faults in the area range from 16 m/m.y. to 42 m/m.y., and generally appear to decrease from the eastern edge of the Colorado Plateau to the Abiquiu embayment. Incision rates calculated for the period ca. 10 to ca. 3 Ma indicate rapid incision with rates that range from 139 m/m.y. on the eastern edge of the Colorado Plateau to 41 m/m.y. on the western part of the Abiquiu embayment. The Abiquiu area is located along the margin of the Colorado Plateau–Rio Grande rift and lies within the Abiquiu embayment, a shallow, early extensional basin of the Rio Grande rift. Cenozoic rocks include the Eocene El Rito Formation, Oligocene Ritito Conglomerate, Oligocene–Miocene Abiquiu Formation, and Miocene Chama–El Rito and Ojo Caliente Sandstone Members of the Tesuque Formation (Santa Fe Group). Volcanic rocks include the Lobato Basalt (Miocene; ca. 15–8 Ma), El Alto Basalt (Pliocene; ca. 3 Ma), and dacite of the Tschicoma Formation (Pliocene; ca. 2 Ma). Quaternary deposits consist of inset axial and side-stream deposits of the ancestral Rio Chama (Pleistocene in age), landslide and pediment alluvium and colluvium, and Holocene main and side-stream channel and floodplain deposits of the modern Rio Chama. The predominant faults are Tertiary normal high-angle faults that displace rocks basinward. A low-angle fault, referred to as the Abiquiu fault, locally separates an upper plate composed of the transitional zone of the Ojo Caliente Sandstone and Chama–El Rito Members from a lower plate consisting of the Abiquiu Formation or the Ritito Conglomerate. The upper plate is distended into blocks that range from about 0.1 km to 3.5 km long that may represent a larger sheet that has been broken up and partly eroded. Geochronology ( 40 Ar/ 39 Ar) from fifteen volcanic and intrusive rocks resolves discrete volcanic episodes in the Abiquiu area: (1) emplacement of Early and Late Miocene basaltic dikes at 20 Ma and ca. 10 Ma; (2) extensive Late Miocene–age lava flows at 9.5 Ma, 7.9 Ma, and 5.6 Ma; and (3) extensive basaltic eruptions during the early Pliocene at 2.9 Ma and 2.4 Ma. Clasts of biotite- and hornblende-rich trachyandesites and trachydacites from the base of the Abiquiu Formation are dated at ca. 27 Ma, possibly derived from the Latir volcanic field. The most-mafic magmas are interpreted to be generated from a similar lithospheric mantle during rifting, but variations in composition are correlated with partial melting at different depths, which is correlated with thinning of the crust due to extensional processes.

GSA Special Papers↗
USGS2013

Structure and tectonic evolution of the eastern Española Basin, Rio Grande rift, north-central New Mexico

We describe the structure of the eastern Española Basin and use stratigraphic and stratal attitude data to interpret its tectonic development. This area consists of a west-dipping half graben in the northern Rio Grande rift that includes several intrabasinal grabens, faults, and folds. The Embudo–Santa Clara–Pajarito fault system, a collection of northeast- and north-striking faults in the center of the Española Basin, defines the western boundary of the half graben and was active throughout rifting. Throw rates near the middle of the fault system (i.e., the Santa Clara and north Pajarito faults) and associated hanging-wall tilt rates progressively increased during the middle Miocene. East of Española, hanging-wall tilt rates decreased after 10–12 Ma, coinciding with increased throw rates on the Cañada del Almagre fault. This fault may have temporarily shunted slip from the north Pajarito fault during ca. 8–11 Ma, resulting in lower strain rates on the Santa Clara fault. East of the Embudo–Santa Clara–Pajarito fault system, deformation of the southern Barrancos monocline and the Cañada Ancha graben peaked during the early–middle Miocene and effectively ceased by the late Pliocene. The north-striking Gabeldon faulted monocline lies at the base of the Sangre de Cristo Mountains, where stratal dip relations indicate late Oligocene and Miocene tilting. Shifting of strain toward the Embudo–Santa Clara–Pajarito fault system culminated during the late Pliocene–Quaternary. Collectively, our data suggest that extensional tectonism in the eastern Española Basin increased in the early Miocene and probably peaked between 14–15 Ma and 9–10 Ma, preceding and partly accompanying major volcanism, and decreased in the Plio-Pleistocene.

New Mexico↗
USGS2014

Geology and neotectonism in the epicentral area of the 2011 M5.8 Mineral, Virginia, earthquake

This fi eld guide covers a two-day west-to-east transect across the epicentral region of the 2011 M5.8 Mineral, Virginia, earthquake, the largest ever recorded in the Central Virginia seismic zone. The fi eld trip highlights results of recent bedrock and surficial geologic mapping in two adjoining 7.5-min quadrangles, the Ferncliff and the Pendleton, which together encompass the epicenter and most of the 2011–2012 aftershocks. Tectonic history of the region includes early Paleozoic accretion of an island arc (Ordovician Chopawamsic Formation) to Laurentia, intrusion of a granodiorite pluton (Ordovician Ellisville pluton), and formation of a post-Chopawamsic successor basin (Ordovician Quantico Formation), all accompanied by early Paleozoic regional deformation and metamorphism. Local transpressional faulting and retrograde metamorphism occurred in the late Paleozoic, followed by diabase dike intrusion and possible local normal faulting in the early Mesozoic. The overall goal of the bedrock mapping is to determine what existing geologic structures might have been reactivated during the 2011 seismic event, and surfi cial deposits along the South Anna River are being mapped in order to determine possible neotectonic uplift. In addition to bedrock and surfi cial studies, we have excavated trenches in an area that contains two late Paleozoic faults and represents the updip projection of the causative fault for the 2011 quake. The trenches reveal faulting that has offset surfi cial deposits dated as Quaternary in age, as well as numerous other brittle structures that suggest a geologically recent history of neotectonic activity.

Virginia↗
USGS2015

The 2011 Mineral, Virginia, earthquake and its significance for seismic hazards in eastern North America: overview and synthesis

The 23 August 2011 M w (moment magnitude) 5.7 ± 0.1, Mineral, Virginia, earthquake was the largest and most damaging in the central and eastern United States since the 1886 M w 6.8–7.0, Charleston, South Carolina, earthquake. Seismic data indicate that the earthquake rupture occurred on a southeast-dipping reverse fault and consisted of three subevents that progressed northeastward and updip. U.S. Geological Survey (USGS) "Did You Feel It?" intensity reports from across the eastern United States and southeastern Canada, rockfalls triggered at distances to 245 km, and regional groundwater-level changes are all consistent with efficient propagation of high-frequency seismic waves (∼1 Hz and higher) in eastern North America due to low attenuation. Reported damage included cracked or shifted foundations and broken walls or chimneys, notably in unreinforced masonry, and indicated intensities up to VIII in the epicentral area based on USGS "Did You Feel It?" reports. The earthquake triggered the first automatic shutdown of a U.S. nuclear power plant, located ∼23 km northeast of the main shock epicenter. Although shaking exceeded the plant's design basis earthquake, the actual damage to safety-related structures, systems, and components was superficial. Damage to relatively tall masonry structures 130 km to the northeast in Washington, D.C., was consistent with source directivity, soft-soil ground-motion amplification, and anisotropic wave propagation with lower attenuation parallel to the northeast-trending Appalachian tectonic fabric. The earthquake and aftershocks occurred in crystalline rocks within Paleozoic thrust sheets of the Chopawamsic terrane. The main shock and majority of aftershocks delineated the newly named Quail fault zone in the subsurface, and shallow aftershocks defined outlying faults. The earthquake induced minor liquefaction sand boils, but notably there was no evidence of a surface fault rupture. Recurrence intervals, and evidence for larger earthquakes in the Quaternary in this area, remain important unknowns. This event, along with similar events during historical time, is a reminder that earthquakes of similar or larger magnitude pose a real hazard in eastern North America.

Virginia↗
USGS2015

Geologic framework and evidence for neotectonism in the epicentral area of the 2011 Mineral, Virginia, earthquake

The epicenters of the main shock and associated aftershocks of the 2011 moment magnitude, M w 5.8 Mineral, Virginia (USA), earthquake, and the updip projection of the possible fault plane that triggered the quakes, are contained in the areas of 2 adjoining 7.5′ quadrangles in the central Virginia Piedmont. These quadrangles have therefore been the focus of concentrated geologic study in the form of bedrock and surficial mapping and near-surface trenching in order to identify potential seismogenic structures. Bedrock mapping has outlined a series of northeast-southwest–trending lithologic belts that include the Ordovician Chopawamsic and Quantico Formations, the narrow neck of the Late Ordovician Ellisville pluton, and mélange zone III of the Mine Run Complex. The region was affected by at least two ductile deformational events, one in the early Paleozoic that was broadly synchronous with the intrusion of the pluton, and one later in the Paleozoic. The earlier deformation produced the Quantico synclinorium and other regional folds, and the later deformation produced faults with associated high-strain zones. Two of these faults have been trenched at their intersection along the east-dipping eastern contact of the Ellisville neck, near where the causative fault for the earthquake projects to the surface. The trenches have exposed abundant evidence of post-Paleozoic fracturing and faulting, including brecciated quartz-tourmaline veins, slickensided thrust and strike-slip faults, and clay-filled fractures. Fluvial and colluvial gravels that overlie these brittle structures have yielded optically stimulated luminescence ages ranging from ca. 27 to 10 ka. These structures are likely representative of surface features associated with Quaternary earthquakes in the Central Virginia seismic zone.

GSA Special Papers↗
USGS2017

Geology and vertebrate paleontology of Tule Springs Fossil Beds National Monument, Nevada, USA

Tule Springs Fossil Beds National Monument (TUSK) preserves 22,650 acres of the upper Las Vegas Wash in the northern Las Vegas Valley, Nevada, USA. TUSK is home to extensive and stratigraphically complex groundwater discharge (GWD) deposits, called the Las Vegas Formation, which represent springs and desert wetlands that covered much of the valley during the late Quaternary. The GWD deposits record hydrologic changes that occurred here in a dynamic and temporally congruent response to abrupt climatic oscillations over the last ~300 ka (thousands of years). The deposits also entomb the Tule Springs Local Fauna (TSLF), one of the most significant late Pleistocene (Rancholabrean) vertebrate assemblages in the American Southwest. The TSLF is both prolific and diverse, and includes a large mammal assemblage dominated by Mammuthus columbi and Camelops hesternus. Two and possibly three distinct species of Equus, two species of Bison, Panthera atrox, Smilodon fatalis, Canis dirus, Megalonyx jeffersonii, and Nothrotheriops shastensis are also present, and newly recognized faunal components include micromammals, amphibians, snakes, and birds. Invertebrates, plant macrofossils, and pollen also occur in the deposits and provide important and complementary paleoenvironmental information. This field compendium highlights some of the classic stratigraphic sequences of the Las Vegas Formation within TUSK, emphasizes the significant hydrologic changes that occurred in the area during the recent geologic past, and examines the subsequent and repeated effect of rapid climate change on the local desert wetland ecosystem.

Nevada↗
USGS2017

Geology along the Blue Ridge Parkway in Virginia

Detailed geologic mapping and new SHRIMP (sensitive high-resolution ion microprobe) U-Pb zircon, Ar/Ar, Lu-Hf, 14 C, luminescence (optically stimulated), thermochronology (fission-track), and palynology reveal the complex Mesoproterozoic to Quaternary geology along the ~350 km length of the Blue Ridge Parkway in Virginia. Traversing the boundary of the central and southern Appalachians, rocks along the parkway showcase the transition from the para-autochthonous Blue Ridge anticlinorium of northern and central Virginia to the allochthonous eastern Blue Ridge in southern Virginia. From mile post (MP) 0 near Waynesboro, Virginia, to ~MP 124 at Roanoke, the parkway crosses the unconformable to faulted boundary between Mesoproterozoic basement in the core of the Blue Ridge anticlinorium and Neoproterozoic to Cambrian metasedimentary and metavolcanic cover rocks on the western limb of the structure. Mesoproterozoic basement rocks comprise two groups based on SHRIMP U-Pb zircon geochronology: Group I rocks (1.2-1.14 Ga) are strongly foliated orthogneisses, and Group II rocks (1.08-1.00 Ga) are granitoids that mostly lack obvious Mesoproterozoic deformational features. Neoproterozoic to Cambrian cover rocks on the west limb of the anticlinorium include the Swift Run and Catoctin Formations, and constituent formations of the Chilhowee Group. These rocks unconformably overlie basement, or abut basement along steep reverse faults. Rocks of the Chilhowee Group are juxtaposed against Cambrian rocks of the Valley and Ridge province along southeast- and northwest-dipping, high-angle reverse faults. South of the James River (MP 64), Chilhowee Group and basement rocks occupy the hanging wall of the nearly flat-lying Blue Ridge thrust fault and associated splays. South of the Red Valley high-strain zone (MP 144.5), the parkway crosses into the wholly allochthonous eastern Blue Ridge, comprising metasedimentary and meta-igneous rocks assigned to the Wills Ridge, Ashe, and Alligator Back Formations. These rocks are bound by numerous faults, including the Rock Castle Creek fault that separates Ashe Formation rocks from Alligator Back Formation rocks in the core of the Ararat River synclinorium. The lack of unequivocal paleontologic or geochronologic ages for any of these rock sequences, combined with fundamental and conflicting differences in tectonogenetic models, compound the problem of regional correlation with Blue Ridge cover rocks to the north. The geologic transition from the central to southern Appalachians is also marked by a profound change in landscape and surficial deposits. In central Virginia, the Blue Ridge consists of narrow ridges that are held up by resistant but contrasting basement and cover lithologies. These ridges have shed eroded material from their crests to the base of the mountain fronts in the form of talus slopes, debris flows, and alluvial-colluvial fans for perhaps 10 m.y. South of Roanoke, however, ridges transition into a broad hilly plateau, flanked on the east by the Blue Ridge escarpment and the eastern Continental Divide. Here, deposits of rounded pebbles, cobbles, and boulders preserve remnants of ancestral west-flowing drainage systems. Both bedrock and surficial geologic processes provide an array of economic deposits along the length of the Blue Ridge Parkway corridor in Virginia, including base and precious metals and industrial minerals. However, common stone was the most important commodity for creating the Blue Ridge Parkway, which yielded building stone for overlooks and tunnels, or crushed stone for road base and pavement.

Virginia↗
USGS2017

Geology of Seattle, a field trip

Seattle’s geologic record begins with Eocene deposition of fluvial arkosic sandstone and associated volcanic rocks of the Puget Group, perhaps during a time of regional strike-slip faulting, followed by late Eocene and Oligocene marine deposition of the Blakeley Formation in the Cascadia forearc. Older Quaternary deposits are locally exposed. Most of the city is underlain by up to 100 m of glacial drift deposited during the Vashon stade of Fraser glaciation, 18–15 cal k.y. B.P. Vashon Drift includes lacustrine clay and silt of the Lawton Clay, lacustrine and fluvial sand of the Esperance Sand, and concrete-like Vashon till. Mappable till is absent over much of the area of the Vashon Drift. Peak local ice thickness was 900 m. Isostatic response to this brief ice loading was significant. Upon deglaciation, global ice-equivalent sea level was about −100 m and local RSL (relative sea level) was 15–20 m, suggesting a total isostatic depression of ~115–120 m at Seattle. Subsequent rapid rebound outstripped global sea-level rise to result in a newly recognized marine low-stand shoreline at −50 m. The Seattle fault is a north-verging thrust or reverse fault with ~7.5 km of throw. Conglomeratic Miocene strata may record initiation of shortening. Field relations indicate that fault geometry has evolved through three phases. At present, the north-verging master fault is blind, whereas several surface-rupturing faults above the master fault are south verging. The 900–930 A.D. Restoration Point earthquake raised a 5 km × 35 km (or larger) area as much as 7 m. The marine low-stand shoreline is offset by a similar amount, thus there has been only one such earthquake in the last ~11 k.y. Geomorphology is largely glacial: an outwash plain decorated with ice-molded flutes and large, anastomosing tunnel valleys carved by water flowing beneath the ice sheet. Euro-Americans initially settled here because of landscape features formed by uplift in the Restoration Point earthquake. But steep slopes and tide flats were not conducive to commerce: starting in the 1890s and ending in the 1920s, extensive regrading removed hills, decreased slopes, and filled low areas. In steep slopes the glacial stratigraphy is prone to landslides when saturated by unusually wet winters. Seismic hazards comprise moderately large (M 7) earthquakes in the Benioff zone 50 km and more beneath the city, demi-millennial M 9 events on the subduction zone to the west, and infrequent local crustal earthquakes (M 7) that are likely to be devastating because of their proximity. Seismic shaking and consequent liquefaction are of particular concern in Pioneer Square, SoDo, and lower Duwamish neighborhoods, which are largely built on unengineered fill that was placed over estuarine mud. Debris from past Mount Rainier lahars has reached the lower Duwamish valley and a future large lahar could pose a sedimentation hazard.

Washington↗
USGS2021

Late Cenozoic tephrochronology of the Mount Diablo area within the evolving plate-tectonic boundary zone of northern California

We present a tephrochronologic/chronostratigraphic database for the Mount Diablo area and greater San Francisco Bay region that provides a spatial and temporal framework for geologic studies in the region, including stratigraphy, paleogeography, tectonics, quantification of earth surface processes, recurrence of natural hazards, and climate change. We identified and correlated 34 tephra layers within this region using the chemical composition of their volcanic glasses, stratigraphic sequence, and isotopic and other dating techniques. Tephra layers range in age from ca. 65 ka to ca. 29 Ma, as determined by direct radiometric techniques or by correlation to sites where they have been dated. The tephra layers are of Quaternary or Neogene age except for two that are of Oligocene age. We correlated the tephra layers among numerous sites throughout northern California. Source areas of the tephra layers are the Snake River–Yellowstone hotspot trend of northern Nevada, southern Idaho, and western Wyoming; the Nevadaplano caldera complex of central Nevada; the Jemez Mountains–Valles Caldera in northwestern New Mexico; the Southern Nevada volcanic field and related source areas in eastern California and west-central Nevada; the Quien Sabe–Sonoma volcanic centers of the California Coast Ranges; and the young Cascade Range volcanic centers of northeastern California and Oregon.

GSA Memoirs↗
USGS2023

Construction and modification of debris-flow alluvial fans as captured in the geomorphic and sedimentary record: Examples from the western Sangre de Cristo Mountains, south-central Colorado

Debris-flow alluvial fans are iconic features of dynamic landscapes and are hypothesized to record tectonic and climatic change. Here, we highlight their complex formation and evolution through an exemplary suite of Quaternary debris-flow alluvial fans emanating from the western range front of the Sangre de Cristo Mountains in south-central Colorado, USA. To evaluate the constructive and modifying processes that produce fan form and the associated sedimentary signatures, we applied a combined geomorphologic and sedimentologic approach using sedimentary facies analysis, soils mapping, high-resolution topographic data, and luminescence geochronology to document timing of fan construction and modification. We explored two subsets of fans in the study area: a southern set sourced from the extensively glaciated drainages of the Blanca Peak massif, and a northern set from the unglaciated drainages south of Great Sand Dunes National Park. Both sets of fans have: (1) active and successively abandoned surfaces that show evolving degradation of primary features through modification by secondary processes, (2) associated facies that display distinct characteristics representative of primary depositional and secondary modifying sedimentary processes, and (3) evidence of primary debris flow with subsequent modification by secondary processes. We found that surface geomorphology and facies assemblages in exposed alluvial-fan deposits represent sediment transport processes on both active and abandoned lobes. The link between fan surface morphologies and the sedimentary facies of their deposits provides a basis for an evolutionary process–based interpretation of debris-flow alluvial-fan geomorphology and provides a better understanding of complexities in buried paleosurfaces (intraformational progressive unconformities), surficial deformation, and landform development as recorded in debris-flow fan deposits in the sedimentary record.

Colorado↗
USGS2024

Volcanism and tectonics of young basaltic fields in the eastern California shear zone, California, USA

Circa 12 Ma, there was a fundamental reorganization of magmatism and tectonics in the Mojave Desert, California, USA, from basaltic to rhyolitic fields associated with extensional tectonics to dispersed basaltic monogenetic fields associated with the northwest- or east-striking strike-slip faults. The broad zone of strike-slip faults associated with the San Andreas transform margin stretched east to Arizona, but the high slip-rate central part that is known as the Quaternary eastern California shear zone is the locus of the post–12 Ma volcanism. We compiled a literature review of 29 basaltic fields, conducted detailed and reconnaissance study of several fields, and conducted geochemistry on many. Most of the volcanic fields are near or cut by the long fault systems, but more importantly, in nearly two-thirds of the fields that have scoria cones, the cones are <1 km from one of these faults. Eighteen volcanic fields have geochemistry data, and of the 441 analyses of major elements, 286 are new U.S. Geological Survey data that include comprehensive trace elements. The data are used to compare fields and determine the compositional variations during the formation of each field. Comparisons between fields show that several nearby volcanic fields have similar geochemical compositions and trends compared to distant fields; we suggest that six magmatic clusters formed, some with 200–300 k.y. duration. Spatial patterns change over the 12 m.y. span, with early fields forming in the north and south and the youngest in a central area from Pisgah to Amboy fields. The volume of magma also changed, most notably with a sixfold increase ca. 4 Ma followed by a 2–3 m.y. quiescence. In addition to the fracture control provided by strike-slip faults as magma conduits, we advance arguments for shear melting in the mantle along the most active faults, with secondary controls of local tectonic interactions, to explain spatial and temporal patterns in the fields.

California↗
USGS2005

Dating offset fans along the Mojave section of the San Andreas fault using cosmogenic 26Al and 10Be

Analysis of cosmogenic 10Be and 26Al in samples collected from exposed boulders (n = 20) and from buried sediment (n = 3) from offset fans along the San Andreas fault near Little Rock, California, yielded ages, ranging from 16 to 413 ka, which increase with distance from their source at the mouth of Little Rock Creek. In order to determine the age of the relatively younger fans, the erosion rate of the boulders and the cosmogenic nuclide inheritance from exposure prior to deposition in the fan were established. Cosmogenic nuclide inheritance values that range between 8.5 ?? 103 and 196 ?? 103 atoms 10Be g-1 quartz were determined by measuring the concentrations and ratios of 10Be and 26Al in boulders (n = 10) and fine sediment (n = 7) at the outlet of the present active stream. Boulder erosion rate, ranging between 17 and 160 mm k.y.-1, was estimated by measuring 10Be and 26Al concentrations in nearby bedrock outcrops (n = 8). Since the boulders on the fans represent the most resistant rocks in this environment, we used the lowest rate for the age calculations. Monte Carlo simulations were used to determine ages of 16 ?? 5 and 29 ?? 7 ka for the two younger fan surfaces. Older fans (older than 100 ka) were dated by analyzing 10Be and 26Al concentrations in buried sand samples. The ages of the three oldest fans range between 227 ?? 242 and 413 ?? 185 ka. Although fan age determinations are accompanied by large uncertainties, the results of this study show a clear trend of increasing fan ages with increasing distance from the source near Little Rock Creek and provide a long-term slip rate along this section of the San Andreas fault. Slip rate along the Mojave section of the San Andreas fault for the past 413 k.y. can be determined in several ways. The average slip rate calculated from the individual fan ages is 4.2 ?? 0.9 cm yr-1. A linear regression through the data points implies a slip rate of 3.7 ?? 1.0 cm yr-1. A most probable slip rate of 3.0 ?? 1.0 cm yr-1 is determined by using a X2 test. These rates suggest that the average slip along the Mojave section of the San Andreas fault has been relatively constant over this time period. The slip rate along the Mojave section of the San Andreas fault, determined in this study, agrees well with previous slip rate calculations for the Quaternary. ?? 2005 Geological Society of America.

Geological Society of America Bulletin↗
USGS2009

Sediment yield from the tectonically active semiarid Western Transverse Ranges of California

Sediment yields from the world's rivers are generally highest from steep drainage basins with weak lithology, active tectonics, or severe land-use impacts. Here, we evaluate sediment yields from the Western Transverse Ranges of California in an attempt to explain why they are two- to tenfold greater than the surrounding areas of California. We found that suspended-sediment yields across the gauged basins of the Western Transverse Range during 1969-1999 varied by approximately an order of magnitude (740-5300 t/km 2 /yr). Similarly, fine-sediment concentrations for normalized discharge rates varied by almost two orders of magnitude (e.g., 1.3-110 g/L for the mean annual flood) for 11 previously unmonitored drainages of the Santa Ynez Mountains. Areas with high sediment yields consistently have weakly consolidated bedrock (Quaternary-Pliocene marine formations) and are associated with the highest rates of tectonic uplift of the region (>5 mm/yr). These regions are important to the sediment discharge budgets, because ???50% of the total suspended-sediment discharge from the Western Transverse Range is estimated to be generated within these regions, even though they represent only ???10% of the total watershed area. Previous estimates of suspended-sediment discharge from the Ventura River have likely been underestimated by ???50% because the gauging station is located immediately upstream of a high sediment yield region. We also found a significant and positive correlation between sediment yield and the percentage of a watershed with grassland and agricultural land use. These results suggest that there is adequate variation within the lithology, tectonics, and land use of the broader Western Transverse Range geologic province to induce large variations in sediment yield at the local scale. ?? 2009 Geological Society of America.

Geological Society of America Bulletin↗
USGS2010

Cosmogenic nuclide and uranium-series dating of old, high shorelines in the western Great Basin, USA

Closed-basin pluvial lakes are sensitive recorders of effective moisture, and they provide a terrestrial signal of climate change that can be compared to marine and ice records of glacial-interglacial cycles. Although the most recent deep-lake cycle in the western Great Basin (at ca. 16 ka) has been studied intensively, comparatively little is known about the longer-term Quaternary lacustrine history of the region. Lacustrine features higher than those of the most recent highstand have been discovered in many locations throughout the western Great Basin. Qualitative geomorphic and soil studies of shoreline sequences above the latest Pleistocene level suggest that their ages increase as a function of increasing altitude. The results of cosmogenic nuclide dating using chlorine-36 depth profiles from three sites in Nevada (Walker Lake, Columbus Salt Marsh, and Newark Valley), combined with uranium-series and radiocarbon ages, corroborate the geomorphic and soil evidence. The 36 Cl results are consistent with available 14 C ages and together indicate that the most recent highstands of all three lakes occurred ca. 20–15 ka, late in marine isotope stage (MIS) 2, as shown by previous ages. The 36 Cl ages indicate that older lakes in all three basins reached highstands between 100 and 50 ka, and most likely during MIS 4. Shorelines of this age are at about the same or higher altitudes as the younger, MIS 2 shorelines in those basins. The 36 Cl results combined with uranium-series ages and one tephra correlation obtained on shorelines higher in altitude than those of MIS 4 and 2 lakes suggest that there were also major lake highstands in the western Great Basin at ca. 100–200 ka, likely corresponding with MIS 6, and during at least two older periods. From these results, we conclude that the preserved shorelines show an apparent decrease in maximum levels with time, suggesting long-term drying of the region since the early middle Pleistocene.

California, Oregon, and Nevada↗