Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Cells”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75Linked to original sources
USGS2006

Vital effects in coral skeletal composition display strict three-dimensional control

Biological control over coral skeletal composition is poorly understood but critically important to paleoenvironmental reconstructions. We present microanalytical measurements of trace-element abundances as well as oxygen and carbon isotopic compositions of individual skeletal components in the zooxanthellate coral Colpophyllia sp. Our data show that centers of calcification (COC) have higher trace element concentrations and distinctly lighter isotopic compositions than the fibrous components of the skeleton. These observations necessitate that COC and the fibrous skeleton are precipitated by different mechanisms, which are controlled by specialized domains of the calicoblastic cell-layer. Biological processes control the composition of the skeleton even at the ultra-structure level. Copyright 2006 by the American Geophysical Union.

Geophysical Research Letters↗
USGS2007

Airborne dust transport to the eastern Pacific Ocean off southern California: Evidence from San Clemente Island

Islands are natural dust traps, and San Clemente Island, California, is a good example. Soils on marine terraces cut into Miocene andesite on this island are clay-rich Vertisols or Alfisols with vertic properties. These soils are overlain by silt-rich mantles, 5-20 cm thick, that contrast sharply with the underlying clay-rich subsoils. The silt mantles have a mineralogy that is distinct from the island bedrock. Silt mantles are rich in quartz, which is rare in the island andesite. The clay fraction of the silt mantles is dominated by mica, also absent from local andesite, and contrasts with the subsoils, dominated by smectite. Ternary plots of immobile trace elements (Sc-Th-La and Ta-Nd-Cr) show that the island andesite has a composition intermediate between average upper continental crust and average oceanic crust. In contrast, the silt and, to a lesser extent, clay fractions of the silt mantles have compositions closer to average upper continental crust. The silt mantles have particle size distributions similar to loess and Mojave Desert dust, but are coarser than long-range-transported Asian dust. We infer from these observations that the silt mantles are derived from airborne dust from the North American mainland, probably river valleys in the coastal mountains of southern California and/or the Mojave Desert. Although average winds are from the northwest in coastal California, easterly winds occur numerous times of the year when "Santa Ana" conditions prevail, caused by a high-pressure cell centered over the Great Basin. Examination of satellite imagery shows that easterly Santa Ana winds carry abundant dust to the eastern Pacific Ocean and the California Channel Islands. Airborne dust from mainland North America may be an important component of the offshore sediment budget in the easternmost Pacific Ocean, a finding of potential biogeochemical and climatic significance.

Journal of Geophysical Research D: Atmospheres↗
USGS2008

In situ Raman spectroscopic investigation of the structure of subduction-zone fluids

In situ Raman spectra of synthetic subduction-zone fluids (KAlSi3O8-H2O system) were measured to 900?? and 2.3 GPa using a hydrothermal diamond-anvil cell. The structures of aqueous fluid and hydrous melt become closer when conditions approach the second critical endpoint. Almost no three-dimensional network was observed in the supercritical fluid above 2 GPa although a large amount of silicate component is dissolved, suggesting that the physical and chemical properties of these phases change drastically at around the second critical endpoint. Our experimental results indicate that the fluids released from a subducting slab change from aqueous fluid to supercritical fluid with increasing depth under the volcanic arcs. Copyright 2008 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗
USGS2008

Diffuse flow hydrothermal manganese mineralization along the active Mariana and southern Izu-Bonin arc system, western Pacific

Abundant ferromanganese oxides were collected along 1200 km of the active Izu-Bonin-Mariana arc system. Chemical compositions and mineralogy show that samples were collected from two deposit types: Fe-Mn crusts of mixed hydrogenetic/hydrothermal origin and hydrothermal Mn oxide deposits; this paper addresses only the second type. Mn oxides cement volcaniclastic and biogenic sandstone and breccia layers (Mn sandstone) and form discrete dense stratabound layers along bedding planes and within beds (stratabound Mn). The Mn oxide was deposited within coarse-grained sediments from diffuse flow systems where precipitation occurred below the seafloor. Deposits were exposed at the seabed by faulting, mass wasting, and erosion. Scanning electron microscopy and microprobe analyses indicate the presence of both amorphous and crystalline 10 ?? and 7 ?? manganate minerals, the fundamental chemical difference being high water contents in the amorphous Mn oxides. Alternation of amorphous and crystalline laminae occurs in many samples, which likely resulted from initial rapid precipitation of amorphous Mn oxides from waxing pulses of hydrothermal fluids followed by precipitation of slow forming crystallites during waning stages. The chemical composition is characteristic of a hydrothermal origin including strong fractionation between Fe (mean 0.9 wt %) and Mn (mean 48 wt %) for the stratabound Mn, generally low trace metal contents, and very low rare earth element and platinum group element contents. However, Mo, Cd, Zn, Cu, Ni, and Co occur in high concentrations in some samples and may be good indicator elements for proximity to the heat source or to massive sulfide deposits. For the Mn sandstones, Fe (mean-8.4%) and Mn (12.4%) are not significantly fractionated because of high Fe contents in the volcaniclastic material. However, the proportion of hydrothermal Fe (nondetrital Fe) to total Fe is remarkably constant (49-58%) for all the sample groups, regardless of the degree of Mn mineralization. Factor analyses indicate various mixtures of two dominant components: hydrothermal Mn oxide for the stratabound Mn and detrital aluminosilicate for the Mn-cemented sandstone; and two minor components, hydrothermal Fe oxyhydroxide and biocarbonate/biosilica. Our conceptual model shows that Mn mineralization was produced by hydrothermal convection cells within arc volcanoes and sedimentary prisms that occur along, the flanks and within calderas. The main source of hydrothermal fluid was seawater that penetrated through fractures, faults, and permeable volcanic edifices. The fluids were heated by magma, enriched in metals by leaching of basement rocks and sediments, and mixed with magmatic fluids and gases. Dikes and sills may have been another source of heat that drove small-scale circulation within sedimentary prisms. Copyright 2008 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗
USGS2008

Pathogen and chemical transport in the karst limestone of the Biscayne aquifer: 3. Use of microspheres to estimate the transport potential of Cryptosporidium parvum oocysts

The vulnerability of a municipal well in the Northwest well field in southeastern Florida to potential contamination by Cryptosporidium parvum oocysts was assessed in a large‐scale, forced‐gradient (convergent) injection and recovery test. The field study involved a simultaneous pulse introduction of a nonreactive tracer (SF 6 , an inert gas) and oocyst‐sized (1.6, 2.9, and 4.9 μ m diameter) carboxylated polystyrene microspheres into karst limestone of the Biscayne aquifer characterized by a complex triple (matrix, touching‐vug, and conduit) porosity. Fractional recoveries 97 m down gradient were inversely related to diameter and ranged from 2.9% for the 4.9 μ m microspheres to 5.8% for 1.6 μ m microspheres. Their centers of mass arrived at the pumping well approximately threefold earlier than that of the nonreactive tracer SF 6 (gas), underscoring the need for use of colloid tracers and field‐scale tracer tests for these kinds of evaluations. In a modified triaxial cell using near in situ chemical conditions, 2.9 and 4.9 μ m microspheres underestimated by fourfold to sixfold the attachment potential of the less electronegative 2.9–4.1 μ m oocysts in the matrix porosity of limestone core samples. The field and laboratory results collectively suggested that it may take 200–300 m of transport to ensure even a 1‐log unit removal of oocysts, even though the limestone surfaces exhibited a substantive capability for their sorptive removal. The study further demonstrated the utility of microspheres as oocyst surrogates in field‐scale assessments of well vulnerability in limestone, provided that differences in attachment behaviors between oocysts and microspheres are taken into account.

Water Resources Research↗
USGS2008

Effects of turbulence on hydraulic heads and parameter sensitivities in preferential groundwater flow layers

A conduit flow process (CFP) for the Modular Finite Difference Ground‐Water Flow model, MODFLOW‐2005, has been created by the U.S. Geological Survey. An application of the CFP on a carbonate aquifer in southern Florida is described; this application examines (1) the potential for turbulent groundwater flow and (2) the effects of turbulent flow on hydraulic heads and parameter sensitivities. Turbulent flow components were spatially extensive in preferential groundwater flow layers, with horizontal hydraulic conductivities of about 5,000,000 m d −1 , mean void diameters equal to about 3.5 cm, groundwater temperature equal to about 25°C, and critical Reynolds numbers less than or equal to 400. Turbulence either increased or decreased simulated heads from their laminar elevations. Specifically, head differences from laminar elevations ranged from about −18 to +27 cm and were explained by the magnitude of net flow to the finite difference model cell. Turbulence also affected the sensitivities of model parameters. Specifically, the composite‐scaled sensitivities of horizontal hydraulic conductivities decreased by as much as 70% when turbulence was essentially removed. These hydraulic head and sensitivity differences due to turbulent groundwater flow highlight potential errors in models based on the equivalent porous media assumption, which assumes laminar flow in uniformly distributed void spaces.

Water Resources Research↗
USGS2010

Parametric study of the physical properties of hydrate-bearing sand, silt, and clay sediments: 1. Electromagnetic properties

The marked decrease in bulk electrical conductivity of sediments in the presence of gas hydrates has been used to interpret borehole electrical resistivity logs and, to a lesser extent, the results of controlled source electromagnetic surveys to constrain the spatial distribution and predicted concentration of gas hydrate in natural settings. Until now, an exhaustive laboratory data set that could be used to assess the impact of gas hydrate on the electromagnetic properties of different soils (sand, silt, and clay) at different effective stress and with different saturations of hydrate has been lacking. The laboratory results reported here are obtained using a standard geotechnical cell and the hydrate-formed tetrahydrofuran (THF), a liquid that is fully miscible in water and able to produce closely controlled saturations of hydrate from dissolved phase. Both permittivity and electrical conductivity are good indicators of the volume fraction of free water in the sediment, which is in turn dependent on hydrate saturation. Permittivity in the microwave frequency range is particularly predictive of free water content since it is barely affected by ionic concentration, pore structure, and surface conduction. Electrical conductivity (or resistivity) is less reliable for constraining water content or hydrate saturation: In addition to fluid-filled porosity, other factors, such as the ionic concentration of the pore fluid and possibly other conduction effects (e.g., surface conduction in high specific surface soils having low conductivity pore fluid), also influence electrical conductivity.

Journal of Geophysical Research↗
USGS2010

Parametric study of the physical properties of hydrate‐bearing sand, silt, and clay sediments: 2. Small‐strain mechanical properties

The small‐strain mechanical properties (e.g., seismic velocities) of hydrate‐bearing sediments measured under laboratory conditions provide reference values for calibration of logging and seismic exploration results acquired in hydrate‐bearing formations. Instrumented cells were designed for measuring the compressional (P) and shear (S) velocities of sand, silts, and clay with and without hydrate and subject to vertical effective stresses of 0.01 to 2 MPa. Tetrahydrofuran (THF), which is fully miscible in water, was used as the hydrate former to permit close control over the hydrate saturation S hyd and to produce hydrate from dissolved phase, as methane hydrate forms in most natural marine settings. The results demonstrate that laboratory hydrate formation technique controls the pattern of P and S velocity changes with increasing S hyd and that the small‐strain properties of hydrate‐bearing sediments are governed by effective stress, σ ′ v and sediment specific surface. The S velocity increases with hydrate saturation owing to an increase in skeletal shear stiffness, particularly when hydrate saturation exceeds S hyd ≈ 0.4. At very high hydrate saturations, the small strain shear stiffness is determined by the presence of hydrates and becomes insensitive to changes in effective stress. The P velocity increases with hydrate saturation due to the increases in both the shear modulus of the skeleton and the bulk modulus of pore‐filling phases during fluid‐to‐hydrate conversion. Small‐strain Poisson's ratio varies from 0.5 in soft sediments lacking hydrates to 0.25 in stiff sediments (i.e., subject to high vertical effective stress or having high S hyd ). At S hyd ≥ 0.5, hydrate hinders expansion and the loss of sediment stiffness during reduction of vertical effective stress, meaning that hydrate‐rich natural sediments obtained through pressure coring should retain their in situ fabric for some time after core retrieval if the cores are maintained within the hydrate stability field.

Journal of Geophysical Research↗
USGS2010

Estimating the timing and location of shallow rainfall-induced landslides using a model for transient, unsaturated infiltration

Shallow rainfall-induced landslides commonly occur under conditions of transient infiltration into initially unsaturated soils. In an effort to predict the timing and location of such landslides, we developed a model of the infiltration process using a two-layer system that consists of an unsaturated zone above a saturated zone and implemented this model in a geographic information system (GIS) framework. The model links analytical solutions for transient, unsaturated, vertical infiltration above the water table to pressure-diffusion solutions for pressure changes below the water table. The solutions are coupled through a transient water table that rises as water accumulates at the base of the unsaturated zone. This scheme, though limited to simplified soil-water characteristics and moist initial conditions, greatly improves computational efficiency over numerical models in spatially distributed modeling applications. Pore pressures computed by these coupled models are subsequently used in one-dimensional slope-stability computations to estimate the timing and locations of slope failures. Applied over a digital landscape near Seattle, Washington, for an hourly rainfall history known to trigger shallow landslides, the model computes a factor of safety for each grid cell at any time during a rainstorm. The unsaturated layer attenuates and delays the rainfall-induced pore-pressure response of the model at depth, consistent with observations at an instrumented hillside near Edmonds, Washington. This attenuation results in realistic estimates of timing for the onset of slope instability (7 h earlier than observed landslides, on average). By considering the spatial distribution of physical properties, the model predicts the primary source areas of landslides.

Journal of Geophysical Research F: Earth Surface↗
USGS2011

Spatial connectivity in a highly heterogeneous aquifer: From cores to preferential flow paths

This study investigates connectivity in a small portion of the extremely heterogeneous aquifer at the Macrodispersion Experiment (MADE) site in Columbus, Mississippi. A total of 19 fully penetrating soil cores were collected from a rectangular grid of 4 m by 4 m. Detailed grain size analysis was performed on 5 cm segments of each core, yielding 1740 hydraulic conductivity ( K ) estimates. Three different geostatistical simulation methods were used to generate 3‐D conditional realizations of the K field for the sampled block. Particle tracking calculations showed that the fastest particles, as represented by the first 5% to arrive, converge along preferential flow paths and exit the model domain within preferred areas. These 5% fastest flow paths accounted for about 40% of the flow. The distribution of preferential flow paths and particle exit locations is clearly influenced by the occurrence of clusters formed by interconnected cells with K equal to or greater than the 0.9 decile of the data distribution (10% of the volume). The fraction of particle paths within the high‐ K clusters ranges from 43% to 69%. In variogram‐based K fields, some of the fastest paths are through media with lower K values, suggesting that transport connectivity may not require fully connected zones of relatively homogenous K . The high degree of flow and transport connectivity was confirmed by the values of two groups of connectivity indicators. In particular, the ratio between effective and geometric mean K (on average, about 2) and the ratio between the average arrival time and the arrival time of the fastest particles (on average, about 9) are consistent with flow and advective transport behavior characterized by channeling along preferential flow paths.

Water Resources Research↗
USGS2011

Opportunity Mars Rover mission: Overview and selected results from Purgatory ripple to traverses to Endeavour crater

Opportunity has been traversing the Meridiani plains since 25 January 2004 (sol 1), acquiring numerous observations of the atmosphere, soils, and rocks. This paper provides an overview of key discoveries between sols 511 and 2300, complementing earlier papers covering results from the initial phases of the mission. Key new results include (1) atmospheric argon measurements that demonstrate the importance of atmospheric transport to and from the winter carbon dioxide polar ice caps; (2) observations showing that aeolian ripples covering the plains were generated by easterly winds during an epoch with enhanced Hadley cell circulation; (3) the discovery and characterization of cobbles and boulders that include iron and stony-iron meteorites and Martian impact ejecta; (4) measurements of wall rock strata within Erebus and Victoria craters that provide compelling evidence of formation by aeolian sand deposition, with local reworking within ephemeral lakes; (5) determination that the stratigraphy exposed in the walls of Victoria and Endurance craters show an enrichment of chlorine and depletion of magnesium and sulfur with increasing depth. This result implies that regional-scale aqueous alteration took place before formation of these craters. Most recently, Opportunity has been traversing toward the ancient Endeavour crater. Orbital data show that clay minerals are exposed on its rim. Hydrated sulfate minerals are exposed in plains rocks adjacent to the rim, unlike the surfaces of plains outcrops observed thus far by Opportunity. With continued mechanical health, Opportunity will reach terrains on and around Endeavour's rim that will be markedly different from anything examined to date.

Journal of Geophysical Research E: Planets↗
USGS2011

Gravity lineaments of the Cocos Plate: Evidence for a thermal contraction crack origin

Lineaments in the gravity field with wavelengths of 100–200 km affect the south-central Pacific. Because they align with absolute plate motion, it has been proposed that they reflect small-scale convection cells beneath the lithosphere that become elongated by basal shear. Alternatively, it was suggested that they reflect channelized flow of low viscosity material following the base of the lithosphere toward the East Pacific Rise, or that they result from lithospheric-scale thermal contraction cracks. Here, we report about previously undetected gravity lineaments across the Cocos Plate. Similarly to the south-central Pacific lineaments, the Cocos lineaments affect a plate that is anomalously shallow, with seamounts aligning mostly within their troughs. However, the Cocos lineaments strike markedly oblique to absolute plate motion and follow instead trajectories that are perpendicular to seafloor isochrons, a characteristic best explained by the thermal contraction crack model. The presence of steep scarps at the base of seamounts and the seismic imaging of faults striking perpendicular to isochrons further support this interpretation. Assuming that the slow subsidence rates of the south-central Pacific and Cocos plates reflect a warmer upper mantle, we propose that the associated thinner elastic plates favor the formation of thermal contraction cracks. A thinner elastic plate may also explain the pattern of ridge propagation in both areas. At large ridge offsets with a history of steady migration, the propagating segments have been those cutting into the shallower flanks, consistent with the concept that a warmer, thinner plate is more easily cracked.

Geochemistry Geophysics Geosystems↗
USGS2011

Electrical properties of polycrystalline methane hydrate

Electromagnetic (EM) remote-sensing techniques are demonstrated to be sensitive to gas hydrate concentration and distribution and complement other resource assessment techniques, particularly seismic methods. To fully utilize EM results requires knowledge of the electrical properties of individual phases and mixing relations, yet little is known about the electrical properties of gas hydrates. We developed a pressure cell to synthesize gas hydrate while simultaneously measuring in situ frequency-dependent electrical conductivity (σ). Synthesis of methane (CH 4 ) hydrate was verified by thermal monitoring and by post run cryogenic scanning electron microscope imaging. Impedance spectra (20 Hz to 2 MHz) were collected before and after synthesis of polycrystalline CH 4 hydrate from polycrystalline ice and used to calculate σ. We determined the σ of CH 4 hydrate to be 5 × 10 −5 S/m at 0°C with activation energy (E a ) of 30.6 kJ/mol (−15 to 15°C). After dissociation back into ice, σ measurements of samples increased by a factor of ~4 and E a increased by ~50%, similar to the starting ice samples.

Geophysical Research Letters↗
USGS2011

Didymosphenia geminata: Algal blooms in oligotrophic streams and rivers

In recent decades, the diatom Didymosphenia geminata has emerged as nuisance species in river systems around the world. This periphytic alga forms large "blooms" in temperate streams, presenting a counterintuitive result: the blooms occur primarily in oligotrophic streams and rivers, where phosphorus (P) availability typically limits primary production. The goal of this study is to examine how high algal biomass is formed under low P conditions. We reveal a biogeochemical process by which D. geminata mats concentrate P from flowing waters. First, the mucopolysaccaride stalks of D. geminata adsorb both iron (Fe) and P. Second, enzymatic and bacterial processes interact with Fe to increase the biological availability of P. We propose that a positive feedback between total stalk biomass and high growth rate is created, which results in abundant P for cell division. The affinity of stalks for Fe in association with iron-phosphorus biogeochemistry suggest a resolution to the paradox of algal blooms in oliogotrophic streams and rivers. Copyright 2011 by the American Geophysical Union.

Geophysical Research Letters↗
USGS2011

Independent effects of temperature and precipitation on modeled runoff in the conterminous United States

A water‐balance model is used to simulate time series of water‐year runoff for 4 km × 4 km grid cells for the conterminous United States during the 1900–2008 period. Model outputs are used to examine the separate effects of precipitation and temperature on runoff variability. Overall, water‐year runoff has increased in the conterminous United States and precipitation has accounted for almost all of the variability in water‐year runoff during the past century. In contrast, temperature effects on runoff have been small for most locations in the United States even during periods when temperatures for most of the United States increased significantly.

Water Resources Research↗
USGS2019

POLARIS properties: 30-meter probabilistic maps of soil properties over the contiguous United States

Soils play a critical role in the cycling of water, energy, and carbon in the Earth system. Until recently, due primarily to a lack of soil property maps of a sufficiently high‐quality and spatial detail, a minor emphasis has been placed on providing high‐resolution measured soil parameter estimates for land surface models and hydrologic models. This study introduces Probabilistic Remapping of SSURGO (POLARIS) soil properties—a database of 30‐m probabilistic soil property maps over the contiguous United States (CONUS). The mapped variables over CONUS include soil texture, organic matter, pH, saturated hydraulic conductivity, Brooks‐Corey and Van Genuchten water retention curve parameters, bulk density, and saturated water content. POLARIS soil properties was assembled by (1) depth harmonizing and aggregating the pedons in the National Cooperative Soil Survey Soil Characterization Database and the components in Soil Survey Geographic Database into a database of 21,481 different soil series, each soil series having its own vertical profiles of different soil properties, (2) pruning the original POLARIS soil series maps using conventional soil maps to improve soil series prediction accuracy, and (3) merging the assembled soil series databases with the pruned POLARIS soil series maps to construct the soil property maps over CONUS. POLARIS soil properties includes 100‐bin histograms for each layer and variable per grid cell and a series of summary statistics at 30‐, 300‐, and 3,000‐m spatial resolution. Evaluation of POLARIS soil properties using in situ measurements shows an average R2 of 0.41, normalized root‐mean‐square error of 12%, and a normalized mean absolute error of 8.8%.

Water Resources Research↗
USGS2019

Hillslope hydrology in global change research and earth system modeling

Earth System Models (ESMs) are essential tools for understanding and predicting global change, but they cannot explicitly resolve hillslope‐scale terrain structures that fundamentally organize water, energy, and biogeochemical stores and fluxes at subgrid scales. Here we bring together hydrologists, Critical Zone scientists, and ESM developers, to explore how hillslope structures may modulate ESM grid‐level water, energy, and biogeochemical fluxes. In contrast to the one‐dimensional (1‐D), 2‐ to 3‐m deep, and free‐draining soil hydrology in most ESM land models, we hypothesize that 3‐D, lateral ridge‐to‐valley flow through shallow and deep paths and insolation contrasts between sunny and shady slopes are the top two globally quantifiable organizers of water and energy (and vegetation) within an ESM grid cell. We hypothesize that these two processes are likely to impact ESM predictions where (and when) water and/or energy are limiting. We further hypothesize that, if implemented in ESM land models, these processes will increase simulated continental water storage and residence time, buffering terrestrial ecosystems against seasonal and interannual droughts. We explore efficient ways to capture these mechanisms in ESMs and identify critical knowledge gaps preventing us from scaling up hillslope to global processes. One such gap is our extremely limited knowledge of the subsurface, where water is stored (supporting vegetation) and released to stream baseflow (supporting aquatic ecosystems). We conclude with a set of organizing hypotheses and a call for global syntheses activities and model experiments to assess the impact of hillslope hydrology on global change predictions.

Water Resources Research↗
USGS2019

Application of a regional climate model to assess changes in the climatology of the Eastern US and Cuba associated with historic landcover change

We examine the annual, seasonal, monthly, and diurnal climate responses to the land use change (LUC) in eastern United States and Cuba during four epochs (1650, 1850, 1920, and 1992) with ensemble simulations conducted with the RegCM4 regional climate model that includes the Biosphere Atmosphere Transfer Scheme (BATS1e) surface physics package (Dickinson et al., 1993). We derived the land use (LU) data sets by harmonizing a previous reconstruction (Steyaert & Knox, 2008) with updated observations and modeled potential vegetation. The eight‐member ensembles for each epoch were driven with randomly perturbed 1990–2002 atmospheric boundary conditions derived from the National Center for Environmental Prediction global reanalysis. LUC induces statistically significant climate responses across all epochs; the largest changes occur between 1850 and 1920 with the widespread conversion of forests in the United States and forests, grassland, and woody wetlands in Cuba to agriculture. The atmospheric feedback from the aggregated grid‐cell responses attributed to physical and biophysical parameters in BATS1e alters the circulation in the lower atmosphere, thereby propagating the LUC regionally. Depending on the season and location, the altered circulation reinforces, attenuates, or has little effect on surface responses. Relative to pre‐settlement (1650), the 1992 LU produces colder mean annual air temperature (−0.09 ± 0.16 °C) and increased precipitation (0.08 ± 0.09 mm day −1 ) over the United States, warmer (0.08 °C) and wetter (0.03 mm day −1 ) conditions over Florida, and warming (0.32 °C) and drying (−0.03 mm day −1 ) over Cuba, indicating that LUC has played a varying role in climate change over the region.

Florida↗