Geology ReportsSearch

SEARCH · Geology Reports

Results for “Journal of Water Process Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,711 records · Page 74Linked to original sources

Timing and geometry of the Chemehuevi Formation reveal a late Pleistocene sediment pulse into the Lower Colorado River

The Chemehuevi Formation is a distinctive 50−150-m-thick wedge-shaped Pleistocene sedimentary unit deposited by the Colorado River. It lines the perimeters of the river’s floodplains and bedrock canyons for more than 600 km between the mouth of the Grand Canyon and the delta region in the Gulf of California. The formation is composed of a basal tan to light-yellowish-brown and pale-orange mud-dominated facies overlain and interbedded by a light-yellow-brown sand-dominated facies. The unit is one of two extensively exposed aggradational packages in the Lower Colorado River corridor, in addition to a series of other smaller alluvial terrace deposits. The Chemehuevi Formation appears to represent the response of a fully integrated Colorado River system to a significant perturbation, in contrast to the Bullhead Alluvium, which is likely a unique result of Pliocene river integration. The aggradation of the Chemehuevi Formation in the Lower Colorado River corridor may be similarly due to a unique event in the Colorado River system, or it may instead be a well-preserved sedimentary sequence recording typical behavior of the Colorado River below the Grand Canyon in the late Pleistocene. As such, multiple causal mechanisms have been proposed, but no study to date has conclusively explained the Chemehuevi Formation. To help resolve its timing, duration, and origin, we applied post-infrared infrared stimulated luminescence, carbonate U-Th series, and zircon sensitive high-resolution ion microprobe U-Th series geochronology to determine the ages of key exposures of the unit over a wide spatial area. These new data demonstrate that the Chemehuevi Formation was deposited ca. 110−90 ka. The depositional ages collectively overlap, suggesting that deposition occurred rapidly relative to the resolution of the geochronometers. The new depositional timing coincides with a shift from glacial to interglacial conditions after the marine isotope stage 5-6 transition. This observation is consistent with a climate-induced sediment pulse as a causal mechanism, yet correlations with similar deposits in the Colorado River headwaters or in neighboring catchments appear elusive. Potentially, climate transitions between glacial and interglacial periods induced a sediment pulse from hillslopes of the Colorado River system that resulted in the Chemehuevi Formation. An alternative or additional explanation is that the Chemehuevi Formation represents release of lava dam−impounded sediment in the Grand Canyon. The surface geometry of the Chemehuevi Formation projects upstream to the approximate location of lava dams, and the largest possible lava dam impoundment (the Upper Prospect dam) is comparable in volume to the formation. The lava dam hypothesis appears to be a possible explanation for the Chemehuevi Formation. However, tying deposition to a specific lava dam or series of lava dams remains challenging due to discrepancies in timing and volume. The combined effects of a series of lava dams may have led to the Chemehuevi Formation, as the last Pleistocene lava dam eruption coincides with the onset of deposition. Alternatively, the formation may result from the combined effects of both regional climate transitions and the lava dams that created a transient reservoir to compound a climate transition−driven sediment pulse. The geochronologic data presented here do not allow us to distinguish between the lava dam or climate transition hypotheses but will need to be reconciled with any future proposed depositional model.

Arizona, California, Nevada

Effects of human activity on Khumbu Glacier: Towards a sustainable Everest Base Camp

The Everest Base Camp (EBC), a critical staging area for mountaineers attempting to summit Mount Everest, has seen a significant increase in human activity over the past few decades. The increasing number of climbers, trekkers, and support staff, particularly at the campsite area, has intensified environmental impacts on the Khumbu Glacier. This study investigates the effects of human activity at EBC, focusing on three contributors to glacier melt: global climate change, local fossil fuel consumption, and human urinary discharge. Through field data collected during the spring 2023 climbing season, this study examines the energy released through the use of liquefied petroleum gas (LPG), kerosene, and petrol for cooking, heating, and electricity, as well as the heat generated by human urinary discharge. The total heat energy released from these activities at EBC in the spring of 2023 was 849,174 ± 179,774 MJ, which would be sufficient to melt 2492 ± 528 tons of glacier ice and snow. Trends in land surface temperature at EBC and adjacent environments during the 1991–2023 period were calculated from Landsat 5, 7, and 9 satellite data. The 32-year Landsat record reveals that EBC surface temperature increased by 0.28 °C year −1 , which was roughly twice the rate of warming at the surface of Khumbu Glacier adjacent to EBC and about 15% higher than the temperature increase of the debris-covered terrain immediately to the north of EBC. The findings suggest that addressing these anthropogenic influences could help to preserve the Khumbu Glacier and support the sustainability of mountaineering in the region. This paper also takes a transformative approach and explores stable and safer locations in case there is a necessity to relocate the current EBC. Two sites have been identified southwest of the existing EBC, which, unlike the current supraglacial site, are situated on stable ground.

Everest Base Camp, Khumbu Glacier

A glimpse into the future of tectonic tremor monitoring

Tectonic tremor is a weak, long-duration seismic signal often observed in subduction zones and on some other plate-bounding faults. Because of tremor's characteristically low amplitude (and low signal-to-noise) and lack of clear phase arrivals, detecting and locating tremor usually requires techniques distinct from those applied to typical earthquakes. Major advances in detection and understanding of tremor have derived in the past from a powerful combination of new data and new analysis techniques. In a recent study, Sagae et al. (2025, https://doi.org/10.1029/2025jb031348 ) exploit that combination again, developing a new machine-learning based workflow and applying it to the S-net cabled seismic network in the Japan trench offshore northern Honshu. Their approach, although complex, succeeds in detecting several times more tremor activity than earlier studies, resulting in new insights and providing a blueprint for similar approaches that could be applied elsewhere. As real-time earthquake monitoring adopts similar tools, it may present an opportunity to bring tremor monitoring into operational workflows. In turn, this could solidify tremor monitoring as a component of future operational earthquake forecasting.

JGR Solid Earth

Stream sediment geochemistry in mineral exploration: A review of fine-fraction, clay-fraction, bulk leach gold, heavy mineral concentrate and indicator mineral chemistry

Stream sediment surveys support early-stage reconnaissance mineral exploration and regional assessment programmes, enhanced by recent improvements in analytical method detection limits, continuously improving mineral chemistry, and new approaches to the interpretation of geochemical data. Sediment surveys may be used to predict catchment basin lithology, mineralization type based on pathfinder geochemistry, and geological features based on indicator mineral chemistry. Sediment surveys that target a finer-fraction sediment sample led to the discovery of the La Colosa gold deposit, Colombia. The Batu Hijau porphyry Cu–Au deposit in Indonesia was discovered based on an anomalous clay-sized fraction sample 12 km downstream. In an arid region with poorly developed drainages and minor topographic relief, the Ag-base-metal Navidad District in Argentina was discovered with clay-fraction sediment geochemistry. Heavy mineral concentrate (HMC) sediment surveys that include mineral chemistry determinations have led to global diamond discoveries. HMC surveys contributed to discovery of the Ring of Fire Ni–Cu–PGE and chromite district, Ontario, Canada. Discoveries and geochemical mapping can assist advancement of the application of stream sediment geochemistry in those global areas for which lithologies and deposits are exposed. Stream sediment surveys continue to be one of the most cost-effective geochemical methods for covering large areas for mineral exploration.

Geochemistry: Exploration, Environment, Analysis

Low-frequency earthquakes track the motion of a captured slab fragment

Accurate tectonic models are essential for assessing seismic hazard and fault interactions. However, the plate configuration at the complex Mendocino triple junction, where the San Andreas Fault and the Cascadia subduction zone meet, remains uncertain. We analyzed fault slip associated with a recently identified zone of tectonic tremor and low-frequency earthquakes (LFEs) near the southern edge of the subducting Gorda slab. Based on tidal sensitivity and P-wave first motions, we show that the LFEs are generated by dipping, strike-slip motion. This suggests that a former Farallon slab fragment, now captured by the Pacific plate, is translating northward beneath westernmost North America. This geometry effectively extends the slab interface fault, challenging prevailing interpretations of slab window formation and creating a potential unaccounted earthquake hazard in this region.

Science

Compositional and structural mapping of Northwest Africa 15507 angrite

Angrite meteorites represent interesting sampling of planetary crustal environments. Quench-textured angrites with strong crystal zoning originated from the shallow surface region, with evidence of reducing conditions during solidification. Plutonic angrites have more coarse-grained igneous and metamorphic textures with comparatively less zoning and are interpreted as having equilibrated at greater depth. Plutonic angrites contain the minerals magnetite Fe 3 O 4 comprised of Fe 2+ and Fe 3+ , and rhönite, where Fe 3+ is required by inspection of mineral stoichiometry. NWA 15507 is a plutonic angrite with a microgabbroic texture (mean grainsize ∼1.4 mm) composed of zoned Al-Ti-augite, Ca-bearing olivine, anorthite, with accessory kirschsteinite, rhönite, hercynite, low-Ni kamacite, merrillite, Ti-free magnetite and troilite [ 1 ]. Rhönite analyzed by electron-probe microanalysis (EPMA) has the formula Ca 2.04 (Mg 0.32 Fe 2+ 4.25 Fe 3+ 0.47 Ti 0.33 Al 0.61 )(Si 3.74 Al 2.26 )O 20 , where Fe 3+ was estimated by stoichiometric analysis. During preliminary cathodoluminescence (CL) analysis, complex subgrain and oscillatory zoning was observed in the anorthite. In this study we use a combined approach of electron probe microanalysis (EPMA), cathodoluminescence (CL), electron-backscatter diffraction (EBSD), and laser ablation inductively-coupled plasma mass spectrometry (LA-ICP-MS) to further investigate the anorthite and distribution of Fe 3+ in NWA 15507.

Microscopy and Microanalysis

The impact of 3D structure on coseismic coastal land-level change and tsunami generation in the Cascadia Subduction Zone

Estimates of coseismic vertical displacements from past and potential future subduction zone earthquakes provide critical constraints on regional seismic and tsunami hazard. Many studies use elastic homogeneous half-space models to calculate vertical displacements from a specified earthquake slip distribution, neglecting complexities of 3D structure in subduction zone settings. Here, we use 3D ground motion simulations of potential Cascadia Subduction Zone earthquakes to investigate the impact of realistic 3D Earth structure on estimated vertical displacements. We show that offshore uplift increases when including 3D structure due to high fault slip in low-rigidity accretionary wedge sediments and coastal subsidence decreases due to higher rigidity material at depth. These larger offshore uplifts cause increased tsunami maximum wave heights, and coastal subsidence at paleoseismic sites decreases on average by ∼17 cm, or ∼60%, which can have important implications for the amplitude and extent of slip in earthquake scenarios developed based on paleoseismic data constraints.

California, Oregon, Washington

Assessing locations susceptible to shallow landslide initiation during prolonged intense rainfall in the Lares, Utuado, and Naranjito municipalities of Puerto Rico

Hurricane Maria induced about 70 000 landslides throughout Puerto Rico, USA, including thousands each in three municipalities situated in Puerto Rico's rugged Cordillera Central range. By combining a nonlinear soil-depth model, presumed wettest-case pore pressures, and quasi-three-dimensional (3D) slope-stability analysis, we developed a landslide susceptibility map that has very good performance and continuous susceptibility zones having smooth, buffered boundaries. Our landslide susceptibility map enables assessment of potential ground-failure locations and their use as landslide sources in a companion assessment of inundation and debris-flow runout. The quasi-3D factor of safety, F 3 , showed strong inverse correlation to landslide density (high density at low F 3 ). Area under the curve (AUC) of true positive rate (TPR) versus false positive rate (FPR) indicated success of F 3 in identifying head-scarp points (AUC = 0.84) and source-area polygons (0.85 ≤ AUC ≤ 0.88). The susceptibility zones enclose specific percentages of observed landslides. Thus, zone boundaries use successive F 3 levels for increasing TPR of landslide head-scarp points, with zones bounded by F 3 at TPR = 0.75, very high; F 3 at TPR = 0.90, high; and the remainder moderate to low. The very high susceptibility zone, with 118 landslides km −2 , covered 23 % of the three municipalities. The high zone (51 landslides km −2 ) covered another 10 %.

Puerto Rice

Map of topographic lineaments interpreted as recent surface ruptures along the Bennett Valley and Southern Maacama Fault Zones, Sonoma County, California

This study documents lidar-illuminated topographic lineaments interpreted as evidence of recent surface fault ruptures and surface ruptures related to distributed deformation along the Bennett Valley Fault Zone and the southernmost Maacama Fault Zone in the northern San Francisco Bay area (fig. 1, on map sheet). Together, these fault zones form a structural connection across a right stepover between the main Maacama Fault Zone and the Rodgers Creek Fault, overlapping principal strands of the San Andreas plate boundary system north of San Francisco Bay (figs. 1, 2, on map sheet) that accommodate about a quarter of the ~40 millimeters per year of regional dextral tectonic slip (Parsons and others, 2013). Although much of the Bennett Valley Fault Zone is seismically active (McLaughlin and others, 2012; Sowers and others, 2010), only the north end of the fault zone (the “Spring Valley strand,” indicated on southern map panel of map sheet and labeled “D” in figure 2, on map sheet) was previously known to have youthful geomorphic expression and to displace Holocene deposits (McLaughlin and others, 2008; Sowers and others, 2010; Sowers and others, 2016). Holocene activity along the length of the Bennett Valley Fault Zone and southernmost Maacama Fault Zone, with possible implications for rupture propagation, continuity, and slip transfer, had not been identified. However, fault splays that project eastward from the Rodgers Creek Fault have been mapped and hypothesized to accommodate slip transfer to the Bennett Valley Fault Zone (Hecker and Randolph Loar, 2018). The generally subtle and distributed nature of surface-rupture evidence along the Bennett Valley and southernmost Maacama Fault Zones, and extensive vegetation cover, had left recent faulting previously unmapped along most of the zone. The map presented here represents a new compilation of inferred surface-rupture features detected using high-resolution topographic lidar data from an airborne lidar survey of Sonoma County, California (OpenTopography, 2014). These data, which enable subtle topographic features to be discerned, indicate that recent (likely Holocene) surface ruptures extend throughout the Bennett Valley and southernmost Maacama Fault Zones. The rupture-lineament map was created using a GIS (geographic information system) framework and is included herein as an image map at a scale of 1:36,000 and as digital datasets (included as supplemental information to this report). The mapping is intended to lay the groundwork for future studies designed to better characterize how plate-boundary slip is accommodated on this important and complex system of faults.

California

Late Pleistocene kinematics of the Great Southern Puerto Rico Fault Zone, Puerto Rico

Several onshore faults in southern Puerto Rico have recently been recognized as Quaternary active. However, the kinematics of these faults, particularly any lateral component, remain largely unconstrained. It is difficult to characterize low strain‐rate faults, partially due to extensive erosional and anthropogenic landscape modification, steep relief, and frequent landsliding, limiting the preservation of geomorphic features that could serve as recorders of fault motion. Here, we constrain the kinematics along sections of the Great Southern Puerto Rico Fault Zone (GSPRFZ) on the southern coastal plain of Puerto Rico. We integrate ∼1‐m‐resolution light detection and ranging (lidar)‐derived topography, historical air photos, and field mapping to identify a series of ∼50–1200‐m‐long fault scarps and lineaments that trend northwest–southeast and extend for ≥25 km across the southern coastal plain. Fault scarps are primarily south facing, cut across topography, and displace Quaternary deposits and landforms. We document multiple offset geomorphic markers, including channel thalwegs and interfluves formed in deposits previously mapped as Quaternary piedmont alluvial plain. We observe both vertical (south‐side‐down) and right‐lateral meter‐scale displacements, which indicate that the GSPRFZ accommodates right‐lateral oblique motion in the late Pleistocene, consistent with northeast motion of the Puerto Rico and the Virgin Islands microplate away from the Hispaniola block.

Puerto Rico

The influence of postfire root strength decay on shallow landslide susceptibility in western Oregon

Severe wildfires can increase the potential for postfire landslides, partly due to the loss of vegetation and root reinforcement. This study investigates the multi-year dynamics of root strength following wildfire in coniferous forests of western Oregon and evaluates implications for postfire slope stability. Root tensile strength was measured through laboratory testing of 969 roots collected from 26 test pits over four postfire timeframes: unburned conditions, 4–12 months postfire (Cedar Creek, 2022), 24–35 months postfire (Holiday Farm, 2020), and 59–67 months postfire (Eagle Creek, 2017). Variables analyzed include root diameter, tensile thread strength, stiffness, progressive tensile strength with displacement, time-dependent strength and ductility, root area ratio, and cohesion. Results indicate a 50% reduction in root strength after wildfire, with the lowest values occurring around 4 years postfire. Projections indicate it could take 10–22 years following fire for root strength to recover to 70% and 90% of the prefire original root strength, respectively. This timeline indicates a multi-year window of vulnerability for shallow landslides that reaches a maximum approximately 4 years following fire. Brittle failure behavior was observed in burned root systems compared to unburned root systems, signaling a more abrupt loss of strength at yield. Simple slope stability analyses show that reduced root strength can lead to instability on more gentle slopes and under less saturation in comparison to unburned conditions. These findings highlight the critical role of root reinforcement in postfire slope stability and the long-term implications of wildfire disturbance on landslide susceptibility.

Oregon

Cotton farming pesticides affect ileal microbiota activity expressions of virulome but not resistome or metabolic pathways in a sedentary wild passerine

The increased use of agrochemicals to enhance crop production has had detrimental environmental effects including implication in the sharp decline of North American farmland-breeding birds. Here, using a combination of deep shotgun metatranscriptomics and pesticide exposure data, we sought to assess whether exposure to cotton ( Gossypium spp.) production had a differential effect on ileum multi-kingdom microbial activity, metabolism, anti-microbial resistance, and virulence factors of sedentary northern mockingbirds ( Mimus polyglottos ) sampled from two cotton-producing areas (16 birds in total) and one uncultivated area (7 birds) in Texas, USA. Both Shannon Index values (Adj. r 2 = 0.174, F (1,21) = 5.633, p = 0.027) and a Mantel test (Spearman ρ = 0.184, p = 0.013) supported a relationship between metabolically active microbiota Bray–Curtis dissimilarities and differences in pesticide mixtures among study areas. Virulence factor richness (Adj. r 2 = 0.182, F (1,21) = 5.890, p = 0.024), Shannon Index (Adj. r 2 = 0.231, F (1,21) = 7.612, p = 0.012), and load (sum of virulence factor abundances; Adj. r 2 = 0.160, F (1,21) = 5.194, p = 0.033) were related to total pesticide load (total quantity of pesticides). We found no pesticide effects on expression of either antimicrobial resistance genes or metabolic pathways.

Texas

Variable partitioning of lithium in rhyolitic melt during decompression and ascent

The partitioning behavior of Li in magmatic systems is increasingly being investigated due to the economic importance of Li in the transition to sustainable energy resources (e.g., batteries). However, at upper crustal pressures, it remains uncertain whether Li preferentially partitions into the vapor or liquid (brine) phase or remains in the silicate melt. This complicates our ability to determine where Li resides—silicate melt, minerals, or fluid phase—upon eruption, a crucial factor for understanding its postdepositional movement and concentration into a brine or volcano-sedimentary deposit. Here, we present a novel investigation into the behavior of Li within natural evolved melts during continuous magma decompression and ascent using melt embayments (open melt inclusions). Mineral-hosted melt embayments preserve records of the evolving composition of the exterior melt, including degassing pathways and ascent timescales, when paired with appropriate diffusion coefficients. Lithium concentration profiles were measured in quartz-hosted melt embayments from the rapidly quenched eruptive phases of five rhyolitic, caldera-forming eruptions to investigate the behavior of Li during magma decompression and ascent, where vapor partitioning and ascent dynamics were previously established by investigating H 2 O and CO 2 profiles. We find that in four systems, embayments contain lower interior Li concentrations than the coerupted melt inclusions; the fifth system contains the same Li concentrations in embayments and melt inclusions. However, many of these embayments contain gradients, with 84 % preserving Li enrichment near the melt-bubble interface, as compared to their interior concentration. We interpret these characteristics to represent two distinct stages of Li partitioning during magma decompression and ascent, in contrast to existing literature that proposes only one type of partitioning behavior. The first stage is interpreted as melt depletion of Li, likely driven by partitioning into an exsolved supercritical fluid phase, supported by the strong correlation between the extent of Li depletion and Cl concentration in the melt, as well as the decompression rate. This behavior then fundamentally shifts, where Li reenriches in the melt, postulated to be driven by the unmixing of the supercritical fluid phase at shallow pressures. For the one system that did not develop Li gradients through decompression, we attribute this to the lower values of Na and Cl in the melt, potentially inhibiting the partitioning of Li into a fluid phase. Importantly, the behavior of Li during decompression is not consistent within or between volcanic centers, highlighting the need for systematic experimental investigation in variable composition melts at pressures relevant to conduit dynamics. This knowledge would improve our ability to model Li profiles to understand magma decompression, and predict where Li resides (e.g., stored in volcanic glass, gas, or crystals) upon eruption prior to any later extraction.

Economic Geology

Solution-collapse breccia pipe uranium deposits of the southern Colorado Plateau, northwestern Arizona, USA

Some of the highest-grade uranium deposits in the United States occur in breccia pipes that formed by solution and collapse of sedimentary strata, which occur in the southern portion of the Colorado Plateau in northwestern Arizona. The host breccia pipes are up to 1200 m in vertical extent, average about 90 m in diameter, and can cross-cut strata from their base in the Mississippian Redwall Limestone to as stratigraphically high on some plateaus as the Triassic Chinle Formation. These uranium-base metal deposits are up to 600 m thick and formed within the breccia pipes where they transect the Permian Coconino Sandstone, Hermit Formation, and the Esplanade Sandstone. Of the hundreds of breccia pipes identified across this region, only a small percentage are known to contain mineralization. The main uranium ore mineral is uraninite that is intergrown with at least 20 base-metal sulfide minerals, which contribute Fe, Cu, Co, As, Pb, Zn, Ni, and Ag to the deposits. This study considered regional stratigraphy, sulfur isotope systematics, mineralogy, in situ dating, and compilation and analysis of previous work on the deposits. A comprehensive deposit model has not been published for these deposits. This analysis identified new additions to update the deposit model for these unusual, possibly unique deposits. Proposed modifications to the model include: (1) the source, mechanisms, timing of the base-metal sulfide mineral assemblages, and (2) the source, mechanism, and timing of the uranium mineralization. Sulfide and uranium deposition are shown to be separate mineralization events. The study proposes the possible role of gypsum as a source of sulfur for the sulfide minerals in the deposits. Groundwaters carrying uranium encountered the preexisting sulfides in breccia pipes, reducing the uranyl ions, and precipitating U oxide (as uraninite). Analysis of the regional stratigraphy recognized that numerous beds of gypsum are in the strata that lie only tens of meters above the breccia pipe deposits. In the breccia pipe region, if these stratigraphic units (Toroweap and Kaibab Formations) do not contain gypsum layers then the underlying pipes are not mineralized; where these Permian gypsum layers do occur, breccia pipes can host mineralization. This new understanding should be useful in identifying the prospective region for mineralized pipes.

Arizona

Utility of an instantaneous salt dilution method for measuring streamflow in headwater streams

Streamflow records are biased toward large streams and rivers, yet small headwater streams are often the focus of ecological research in response to climate change. Conventional flow measurement instruments such as acoustic Doppler velocimeters (ADVs) do not perform well during low-flow conditions in small streams, truncating the development of rating curves during critical baseflow conditions dominated by groundwater inflow. We revisited an instantaneous solute tracer injection method as an alternative to ADVs based on paired measurements to compare their precision, efficiency, and feasibility within headwater streams across a range of flow conditions. We show that the precision of discharge measurements using salt dilution by slug injection and ADV methods were comparable overall, but salt dilution was more precise during the lowest flows and required less time to implement. Often, headwater streams were at or below the depth threshold where ADV measurements could even be attempted and transects were complicated by coarse bed material and cobbles. We discuss the methodological benefits and limitations of salt dilution by slug injection and conclude that the method could facilitate a proliferation of streamflow observation across headwater stream networks that are highly undersampled compared to larger streams.

Virginia

A comprehensive fault system inversion approach: Methods and application to NSHM23

We present updated inversion‐based fault‐system solutions for the 2023 update to the National Seismic Hazard Model (NSHM23), standardizing earthquake rate model calculations on crustal faults across the western United States. We build upon the inversion methodology used in the Third Uniform California Earthquake Rupture Forecast (UCERF3) to solve for time‐independent rates of earthquakes in an interconnected fault system. The updated model explicitly maps out a wide range of fault recurrence and segmentation behavior (epistemic uncertainty), more completely exploring the solution space of viable models beyond those of UCERF3. We also improve the simulated annealing implementation, greatly increasing computational efficiency (and thus inversion convergence), and introduce an adaptive constraint weight calculation algorithm that helps to mediate between competing constraints. Hazard calculations show that ingredient changes (especially fault and deformation models) are the primary driver of hazard changes between NSHM23 and UCERF3. Updates to the inversion methodology are also consequential near faults in which the slip rate in UCERF3 was poorly fit or was satisfied primarily using large multifault ruptures that are now restricted by explicit b ‐value and segmentation constraints.

Bulletin of the Seismological Society of America

Airborne radiometric data map alteration of porphyry copper systems in the Elkhorn district, MT

The Elkhorn district in southwestern Montana is known for past production of high-grade base and precious metals from skarn and carbonate replacement deposits. The district also hosts a porphyry Cu-Mo deposit. A radiometric survey flown over the district and surrounds provides maps of surficial concentrations of potassium, thorium, and uranium. Handheld gamma ray spectrometer measurements on altered and unaltered rocks in the district and surrounding region provide a means to ground truth the airborne data. We demonstrate that the airborne and ground-based measurements show similar map patterns. We calculate ratios of the radioelement concentrations and present a potassium enhancement map that combines potassium and ratios of potassium to thorium and uranium. The results highlight the rocks previously mapped as having K-feldspar-biotite and quartz-sericite alteration assemblages in the Elkhorn district and map additional hydrothermal systems in the region, including known alteration in the Radersburg district. The data enhancement techniques can be used as a screening tool for mapping additional porphyry copper systems.

Montana

Greater sage-grouse habitat of Nevada and northeastern California—Integrating space use, habitat selection, and survival indices to guide areas for habitat management

Executive Summary Greater sage-grouse populations ( Centrocercus urophasianus ; hereafter sage-grouse) are threatened by a suite of disturbances and anthropogenic factors that have contributed to a net loss of sagebrush-dominant shrub cover in recent decades. Declines in sage-grouse populations are largely linked to habitat loss across their range. A key component of conservation and land use planning efforts for sage-grouse involves the continued monitoring and modeling of habitat requirements and suitability across its range. The Bureau of Land Management (BLM) is addressing the management of sage-grouse habitats on BLM-authorized public lands throughout the western United States through a land use planning amendment and associated environmental impact statement (86 FR 66331). More than 25 percent of the range-wide distribution of sage-grouse is within Nevada and northeastern California, and information on sage-grouse distribution and habitat requirements is important to guide appropriate management decisions. Therefore, the BLM has identified the need for updated spatially explicit information on sage-grouse habitat in Nevada and northeastern California to guide the land use planning amendment and associated management decisions. To address this need, researchers with the U.S. Geological Survey, in close cooperation with multiple State and Federal resource agency partners, including BLM, Nevada Department of Wildlife (NDOW) and California Department of Fish and Wildlife (CDFW), sought to map sage-grouse distribution and produce example habitat designations in these states. Herein, we report results of our primary study objective, which was to map sage-grouse habitat and create example habitat management areas, based on more than a decade of location and survival data collected from marked sage-grouse across the study region coupled with lek count survey data managed by the NDOW and the CDFW. We expanded on previously developed methodology to incorporate information on habitat selection and survival during reproductive life stages and specific seasons with updated sage-grouse location and known fate datasets, while also including brood-rearing areas that are understood to be threatened and important for population persistence. We combined predictive habitat map surfaces for each life stage and season with updated information on current occupancy patterns to classify habitat based on its suitability and probability of occupancy. We carried out additional steps to delineate specific example habitat management areas, specifically (1) incorporated corridors connecting key nesting and brood-rearing habitat, (2) corrected outputs for pre-wildfire habitat conditions within areas burned in the last 16 years, and (3) masked out areas of anthropogenic development. Our methodological example of deriving habitat management areas was intended to help inform decisions by BLM and other land managers regarding conservation and management of sage-grouse. Associated data products in the form of habitat maps provide updated, detailed, and comprehensive information about the status of habitats and can be useful to partner agencies in their efforts to designate and rank habitats for this species of high conservation concern in Nevada and California, with full recognition that on-the-ground field data and local sources of information and expertise should be used in conjunction with inferences from these models.

California, Idaho, Nevada