SEARCH · Geology Reports

Results for “Analytical Methods”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74Linked to original sources

USGS2009

The SCEC/USGS dynamic earthquake rupture code verification exercise

Numerical simulations of earthquake rupture dynamics are now common, yet it has been difficult to test the validity of these simulations because there have been few field observations and no analytic solutions with which to compare the results. This paper describes the Southern California Earthquake Center/U.S. Geological Survey (SCEC/USGS) Dynamic Earthquake Rupture Code Verification Exercise, where codes that simulate spontaneous rupture dynamics in three dimensions are evaluated and the results produced by these codes are compared using Web-based tools. This is the first time that a broad and rigorous examination of numerous spontaneous rupture codes has been performed—a significant advance in this science. The automated process developed to attain this achievement provides for a future where testing of codes is easily accomplished. Scientists who use computer simulations to understand earthquakes utilize a range of techniques. Most of these assume that earthquakes are caused by slip at depth on faults in the Earth, but hereafter the strategies vary. Among the methods used in earthquake mechanics studies are kinematic approaches and dynamic approaches. The kinematic approach uses a computer code that prescribes the spatial and temporal evolution of slip on the causative fault (or faults). These types of simulations are very helpful, especially since they can be used in seismic data inversions to relate the ground motions recorded in the field to slip on the fault(s) at depth. However, these kinematic solutions generally provide no insight into the physics driving the fault slip or information about why the involved fault(s) slipped that much (or that little). In other words, these kinematic solutions may lack information about the physical dynamics of earthquake rupture that will be most helpful in forecasting future events. To help address this issue, some researchers use computer codes to numerically simulate earthquakes and construct dynamic, spontaneous rupture (hereafter called “spontaneous rupture”) solutions. For these types of numerical simulations, rather than prescribing the slip function at each location on the fault(s), just the friction constitutive properties and initial stress conditions are prescribed. The subsequent stresses and fault slip spontaneously evolve over time as part of the elasto-dynamic solution. Therefore, spontaneous rupture computer simulations of earthquakes allow us to include everything that we know, or think that we know, about earthquake dynamics and to test these ideas against earthquake observations.

Seismological Research Letters↗

USGS2016

Methods of soil resampling to monitor changes in the chemical concentrations of forest soils

Recent soils research has shown that important chemical soil characteristics can change in less than a decade, often the result of broad environmental changes. Repeated sampling to monitor these changes in forest soils is a relatively new practice that is not well documented in the literature and has only recently been broadly embraced by the scientific community. The objective of this protocol is therefore to synthesize the latest information on methods of soil resampling in a format that can be used to design and implement a soil monitoring program. Successful monitoring of forest soils requires that a study unit be defined within an area of forested land that can be characterized with replicate sampling locations. A resampling interval of 5 years is recommended, but if monitoring is done to evaluate a specific environmental driver, the rate of change expected in that driver should be taken into consideration. Here, we show that the sampling of the profile can be done by horizon where boundaries can be clearly identified and horizons are sufficiently thick to remove soil without contamination from horizons above or below. Otherwise, sampling can be done by depth interval. Archiving of sample for future reanalysis is a key step in avoiding analytical bias and providing the opportunity for additional analyses as new questions arise.

Journal of Visualized Experiments↗

USGS2012

History and progress of the North American Soil Geochemical Landscapes Project, 2001-2010

In 2007, the U.S. Geological Survey, the Geological Survey of Canada, and the Mexican Geological Survey initiated a low-density (1 site per 1600 km 2 , 13323 sites) geochemical and mineralogical survey of North American soils (North American Soil Geochemical Landscapes Project). Sampling and analytical protocols were developed at a series of workshops in 20032004 and pilot studies were conducted from 20042007. The ideal sampling protocol at each site includes a sample from 05 cm depth, a composite of the soil A horizon, and a sample from the soil C horizon. The <2-mm fraction of each sample is analyzed for Al, Ca, Fe, K, Mg, Na, S, Ti, Ag, Ba, Be, Bi, Cd, Ce, Co, Cr, Cs, Cu, Ga, In, La, Li, Mn, Mo, Nb, Ni, P, Pb, Rb, Sb, Sc, Sn, Sr, Te, Th, Tl, U, V, W, Y, and Zn by inductively coupled plasma-mass spectrometry and inductively coupled plasma-atomic emission spectrometry following a near-total digestion in a mixture of HCl, HNO 3 , HClO 4 , and HF. Separate methods are used for As, Hg, Se, and total C on this same size fraction. The major mineralogical components are determined by a quantitative X-ray diffraction method. Sampling in the conterminous U.S. was completed in 2010 (c. 4800 sites) with chemical and mineralogical analysis currently underway. In Mexico, approximately 66% of the sampling (871 sites) had been done by the end of 2010 with completion expected in 2012. After completing sampling in the Maritime provinces and portions of other provinces (472 sites, 7.6% of the total), Canada withdrew from the project in 2010. Preliminary results for a swath from the central U.S. to Florida clearly show the effects of soil parent material and climate on the chemical and mineralogical composition of soils. A sample archive will be established and made available for future investigations.

Earth Science Frontiers↗

USGS2022

Using ensemble data assimilation to estimate transient hydrologic exchange flow under highly dynamic flow conditions

Quantifying dynamic hydrologic exchange flows (HEFs) within river corridors that experience high-frequency flow variations caused by dam regulations is important for understanding the biogeochemical processes at the river water and groundwater interfaces. Heat has been widely used as a tracer to infer steady-state flow velocities through analytical solutions of heat transport defined by the diurnal temperature signals. Under sub-daily dynamic flow conditions, however, such analytical solutions are not applicable due to the violation of their fundamental assumptions. In this study, we developed a data assimilation-based approach to estimate the sub-daily flux under highly dynamic flow conditions using multi-depth temperature observations at a 5-min resolution. If the hydraulic gradient is measured, Darcy's law was used to calculate the flux with permeability estimated from temperature responses below the riverbed. Otherwise, flux was estimated directly by assimilating multi-depth temperature data at 1- or 2-hr time intervals assuming one-dimensional flow and heat transport governing equation. By comparing estimated fluxes with model-generated synthetic truth, we demonstrated that both schemes have robust performance in estimating fluxes under highly dynamic flow conditions. This data assimilation-based flux estimation method was able to capture the vertical sub-daily fluxes using multi-depth high-resolution temperature data alone, even in the presence of multi-dimensional flow. This approach has been successfully applied to real field temperature data collected at the Hanford site, which experiences highly dynamic HEFs. Our study shows the promise of adopting distributed 1-D temperature monitoring to capture spatial and temporal exchange dynamics in river corridors at a watershed scale or beyond.

Washington↗

USGS2002

Determination of alkylbenzenesulfonate surfactants in groundwater using macroreticular resins and carbon-13 nuclear magnetic resonance spectrometry

Alkylbenzenesulfonate surfactants were determined in groundwater at concentrations as low as 0.3 mg/L. The method uses XAD-8 resin for concentration, followed by elution with methanol, separation of anionic and nonionic surfactants by anion exchange, quantitation by titration, and identification by 13C nuclear magnetic resonance spectrometry. Laboratory standards and field samples containing straight-chain and branched-chain alkylbenzenesulfonates, sodium dodecyl sulfate, and alkylbenzene ethoxylates were studied. The XAD-8 extraction of surfactants from groundwater was completed in the field, which simplified sample preservation and reduced the cost of transporting samples.

Analytical Chemistry↗

USGS2014

Post-earthquake relaxation using a spectral element method: 2.5-D case

The computation of quasi-static deformation for axisymmetric viscoelastic structures on a gravitating spherical earth is addressed using the spectral element method (SEM). A 2-D spectral element domain is defined with respect to spherical coordinates of radius and angular distance from a pole of symmetry, and 3-D viscoelastic structure is assumed to be azimuthally symmetric with respect to this pole. A point dislocation source that is periodic in azimuth is implemented with a truncated sequence of azimuthal order numbers. Viscoelasticity is limited to linear rheologies and is implemented with the correspondence principle in the Laplace transform domain. This leads to a series of decoupled 2-D problems which are solved with the SEM. Inverse Laplace transform of the independent 2-D solutions leads to the time-domain solution of the 3-D equations of quasi-static equilibrium imposed on a 2-D structure. The numerical procedure is verified through comparison with analytic solutions for finite faults embedded in a laterally homogeneous viscoelastic structure. This methodology is applicable to situations where the predominant structure varies in one horizontal direction, such as a structural contrast across (or parallel to) a long strike-slip fault.

Geophysical Journal International↗

USGS2026

Survey protocols drive heterogeneity in occupancy estimates that cannot be standardized using post hoc analyses

Site occupancy models are widely used to estimate species distributions from presence–nondetection data, yet for mobile animals, the true proportion of sites occupied varies in time. Thus, true occupancy and estimates generated from different protocols are affected by temporal characteristics of survey design. Here we tested whether we could standardize occupancy estimates across different sampling protocols with a post hoc statistical test. Using an individual-based movement model of Wood Thrush ( Hylocichla mustelina ), we simulated point count surveys across 3000 populations under 90 spatially and temporally variable sampling protocols. For each simulation, we fit a standard occupancy model, then used minute-level detections to truncate surveys and generate occupancy estimates across increasing survey lengths. We fit asymptotic models to these series to estimate intercepts (instantaneous occupancy) and asymptotes (longer-term occupancy) and evaluated how well they approximated true instantaneous, daily and seasonal occupancy. We were unable to recover instantaneous or seasonal occupancy from any approach. Both standard occupancy models and asymptotic regression (the top-performing asymptotic model) most closely approximated daily occupancy; although asymptotic regression produced slightly less biased estimates, it showed substantially greater variability, resulting in greater overall error. Our results show that post hoc analytical approaches cannot, at present, reliably standardize occupancy estimates across heterogeneous survey designs. Instead, ensuring biologically informative and comparable estimates will depend on standardized survey protocols. Practical implication : Monitoring programs using presence–nondetection data should prioritize consistent survey protocols when estimating occupancy for mobile species, with a focus on daily occupancy as the most attainable and useful metric. Although the highest accuracy and precision were achieved under the most intensive survey protocols, for point counts of Wood Thrush and similar species, four consecutive 15–20 min surveys provide near-optimal precision and can be completed in a single visit, making them well suited for estimating relative occupancy under logistical constraints. Three 20-min surveys spaced ~24 h apart closely approximate daily occupancy while maintaining reasonable precision. Developing similar protocols for other species and survey methods will be critical to ensuring comparable occupancy estimates across space and time.

Ecological Solutions and Evidence↗

USGS2019

Conducting and interpreting fish telemetry studies: Considerations for researchers and resource managers

Telemetry is an increasingly common tool for studying the ecology of wild fish, with great potential to provide valuable information for management and conservation. For researchers to conduct a robust telemetry study, many essential considerations exist related to selecting the appropriate tag type, fish capture and tagging methods, tracking protocol, data processing and analyses, and interpretation of findings. For telemetry-derived knowledge to be relevant to managers and policy makers, the research approach must consider management information needs for decision-making, while end users require an understanding of telemetry technology (capabilities and limitations), its application to fisheries research and monitoring (study design), and proper interpretation of results and conclusions (considering the potential for biases and proper recognition of associated uncertainties). To help bridge this gap, we provide a set of considerations and a checklist for researchers to guide them in conducting reliable and management-relevant telemetry studies, and for managers to evaluate the reliability and relevance of telemetry studies so as to better integrate findings into management plans. These considerations include implicit assumptions, technical limitations, ethical and biological realities, analytical merits, and the relevance of study findings to decision-making processes.

Reviews in Fish Biology and Fisheries↗

USGS2002

Potassium bromide method of infrared sampling

In the preparation of potassium bromide pressed windows for use in the infrared analysis of solids, severe grinding of the potassium bromide powder may produce strong absorption bands that could interfere seriously with the spectra of the sample. These absorption bands appear to be due to some crystal alteration of the potassium bromide as a result of the grinding process. They were less apt to occur when the coarser powder, which had received a relatively gentle grinding, was used. Window blanks prepared from the coarser powders showed smaller adsorbed water peaks and generally higher over-all transmittance readings than windows pressed from the very fine powders.

Analytical Chemistry↗

USGS1995

User's guide to PHREEQC, a computer program for speciation, reaction-path, advective-transport, and inverse geochemical calculations

PHREEQC is a computer program written in the C programming language that is designed to perform a wide variety of aqueous geochemical calculations. PHREEQC is based on an ion-association aqueous model and has capabilities for (1) speciation and saturation-index calculations, (2) reaction-path and advective-transport calculations involving specified irreversible reactions, mixing of solutions, mineral and gas equilibria surface-complex-ation reactions, and ion-exchange reactions, and (3) inverse modeling, which finds sets of mineral and gas mole transfers that account for composition differences between waters, within specified compositional uncertainties. PHREEQC is derived from the Fortran program PHREEQE, but it has been completely rewritten in C with the addition many new capabilities. New features include the capabilities to use redox couples to distribute redox elements among their valence states in speciation calculations; to model ion-exchange and surface-complex-ation reactions; to model reactions with a fixed-pressure, multicomponent gas phase (that is, a gas bubble); to calculate the mass of water in the aqueous phase during reaction and transport calculations; to keep track of the moles of minerals present in the solid phases and determine automatically the thermodynamically stable phase assemblage; to simulate advective transport in combination with PHREEQC's reaction-modeling capability; and to make inverse modeling calculations that allow for uncertainties in the analytical data. The user interface is improved through the use of a simplified approach to redox reactions, which includes explicit mole-balance equations for hydrogen and oxygen; the use of a revised input that is modular and completely free format; and the use of mineral names and standard chemical symbolism rather than index numbers. The use of (2) eliminates nearly all limitations on army sizes, including numbers of elements, aqueous species, solutions, phases, and lengths of character strings. A new equation solver that optimizes a set of equalities subject to both equality and inequality constraints is used to determine the thermodynamically stable set of phases in equilibrium with a solution. A more complete Newton-Raphson formulation, master-species switching, and scaling of the algebraic equations reduce the number of failures of the numerical method in PHREEQC relative to PHREEQE. This report presents the equations that are the basis for chemical equilibrium and inverse-modeling calculations in PHREEQC, describes the input for the program, and presents twelve examples that demonstrate most of the program's capabilities.

Water-Resources Investigations Report↗

USGS2018

Executive summary. In Second State of the Carbon Cycle Report (SOCCR2): A Sustained Assessment Report

Central to life on Earth, carbon is essential to the molecular makeup of all living things and plays a key role in regulating global climate. To understand carbon’s role in these processes, researchers measure and evaluate carbon stocks and fluxes. A stock is the quantity of carbon contained in a pool or reservoir in the Earth system (e.g., carbon in forest trees), and a flux is the direction and rate of carbon’s transfer between pools (e.g., the movement of carbon from the atmosphere into forest trees during photosynthesis). This document, the Second State of the Carbon Cycle Report (SOCCR2), examines the patterns of carbon stocks and fluxes—collectively called the “carbon cycle.” Emphasis is given to these patterns in specific sectors (e.g., agriculture and energy) and ecosystems (e.g., forests and coastal waters) and to the response of the carbon cycle to human activity. The purpose of SOCCR2 is to assess the current state of the North American carbon cycle and to present recent advances in understanding the factors that influence it. Concentrating on North America—Canada, the United States, and Mexico—the report describes carbon cycling for air, land, inland waters (streams, rivers, lakes, and reservoirs), and coastal waters (see Figure ES.1, p. 23). The questions framing the publication A U.S. Carbon Cycle Science Plan (Michalak et al., 2011) inspired development of three slightly modified questions that guide SOCCR2’s content and focus on North America in a global context: How have natural processes and human actions affected the global carbon cycle on land, in the atmosphere, in the ocean and other aquatic systems, and at ecosystem interfaces (e.g., coastal, wetland, and urban-rural)? How have socioeconomic trends affected atmospheric levels of the primary carbon-containing gases, carbon dioxide (CO2) and methane (CH4)? How have species, ecosystems, natural resources, and human systems been impacted by increasing greenhouse gas (GHG) concentrations, associated changes in climate, and carbon management decisions and practices? SOCCR2 synthesizes the most recent understanding of carbon cycling in North America, assessing new carbon cycle findings and information, the state of knowledge regarding core methods used to study the carbon cycle, and future research needed to best inform carbon management and policy options. Focusing on scientific developments in the decade since the First State of the Carbon Cycle Report (SOCCR1; CCSP 2007), SOCCR2 summarizes the past, current, and projected state of carbon sources, sinks, and natural processes, as well as contributions by human activities. In addition to CO2 and CH4, the report sometimes discusses nitrous oxide (N2O), a GHG associated with activities and processes that affect fluxes of carbon gases.1 SOCCR2 also describes improvements in analysis tools; developments in decision support; and new insights into ecosystem carbon cycling, human causes of changes in the carbon cycle, and social science perspectives on carbon. Since publication of SOCCR1, coordinated research from agencies in the three North American countries has enabled innovative observational, analytical, and modeling capabilities to further advance understanding of the North American carbon cycle (see Appendix D: Carbon Measurement Approaches and Accounting Frameworks, p. 834). Some of the report’s main conclusions, based on the Key Findings of each chapter, are highlighted in Box ES.1, Main Findings of SOCCR2, p. 24.

Report↗

USGS2005

Guiding principles of USGS methodology for assessment of undiscovered conventional oil and gas resources

During the last 30 years, the methodology for assessment of undiscovered conventional oil and gas resources used by the Geological Survey has undergone considerable change. This evolution has been based on five major principles. First, the U.S. Geological Survey has responsibility for a wide range of U.S. and world assessments and requires a robust methodology suitable for immaturely explored as well as maturely explored areas. Second, the assessments should be based on as comprehensive a set of geological and exploration history data as possible. Third, the perils of methods that solely use statistical methods without geological analysis are recognized. Fourth, the methodology and course of the assessment should be documented as transparently as possible, within the limits imposed by the inevitable use of subjective judgement. Fifth, the multiple uses of the assessments require a continuing effort to provide the documentation in such ways as to increase utility to the many types of users. Undiscovered conventional oil and gas resources are those recoverable volumes in undiscovered, discrete, conventional structural or stratigraphic traps. The USGS 2000 methodology for these resources is based on a framework of assessing numbers and sizes of undiscovered oil and gas accumulations and the associated risks. The input is standardized on a form termed the Seventh Approximation Data Form for Conventional Assessment Units. Volumes of resource are then calculated using a Monte Carlo program named Emc2, but an alternative analytic (non-Monte Carlo) program named ASSESS also can be used. The resource assessment methodology continues to change. Accumulation-size distributions are being examined to determine how sensitive the results are to size-distribution assumptions. The resource assessment output is changing to provide better applicability for economic analysis. The separate methodology for assessing continuous (unconventional) resources also has been evolving. Further studies of the relationship between geologic models of conventional and continuous resources will likely impact the respective resource assessment methodologies. ?? 2005 International Association for Mathematical Geology.

Conference Paper↗

USGS2017

In-well time-of-travel approach to evaluate optimal purge duration during low-flow sampling of monitoring wells

A common assumption with groundwater sampling is that low (<0.5 L/min) pumping rates during well purging and sampling captures primarily lateral flow from the formation through the well-screened interval at a depth coincident with the pump intake. However, if the intake is adjacent to a low hydraulic conductivity part of the screened formation, this scenario will induce vertical groundwater flow to the pump intake from parts of the screened interval with high hydraulic conductivity. Because less formation water will initially be captured during pumping, a substantial volume of water already in the well (preexisting screen water or screen storage) will be captured during this initial time until inflow from the high hydraulic conductivity part of the screened formation can travel vertically in the well to the pump intake. Therefore, the length of the time needed for adequate purging prior to sample collection (called optimal purge duration) is controlled by the in-well, vertical travel times. A preliminary, simple analytical model was used to provide information on the relation between purge duration and capture of formation water for different gross levels of heterogeneity (contrast between low and high hydraulic conductivity layers). The model was then used to compare these time–volume relations to purge data (pumping rates and drawdown) collected at several representative monitoring wells from multiple sites. Results showed that computation of time-dependent capture of formation water (as opposed to capture of preexisting screen water), which were based on vertical travel times in the well, compares favorably with the time required to achieve field parameter stabilization. If field parameter stabilization is an indicator of arrival time of formation water, which has been postulated, then in-well, vertical flow may be an important factor at wells where low-flow sampling is the sample method of choice.

Environmental Earth Sciences↗

USGS2014

Tsunami vertical-evacuation planning in the U.S. Pacific Northwest as a geospatial, multi-criteria decision problem

Tsunami vertical-evacuation (TVE) refuges can be effective risk-reduction options for coastal communities with local tsunami threats but no accessible high ground for evacuations. Deciding where to locate TVE refuges is a complex risk-management question, given the potential for conflicting stakeholder priorities and multiple, suitable sites. We use the coastal community of Ocean Shores (Washington, USA) and the local tsunami threat posed by Cascadia subduction zone earthquakes as a case study to explore the use of geospatial, multi-criteria decision analysis for framing the locational problem of TVE siting. We demonstrate a mixed-methods approach that uses potential TVE sites identified at community workshops, geospatial analysis to model changes in pedestrian evacuation times for TVE options, and statistical analysis to develop metrics for comparing population tradeoffs and to examine influences in decision making. Results demonstrate that no one TVE site can save all at-risk individuals in the community and each site provides varying benefits to residents, employees, customers at local stores, tourists at public venues, children at schools, and other vulnerable populations. The benefit of some proposed sites varies depending on whether or not nearby bridges will be functioning after the preceding earthquake. Relative rankings of the TVE sites are fairly stable under various criteria-weighting scenarios but do vary considerably when comparing strategies to exclusively protect tourists or residents. The proposed geospatial framework can serve as an analytical foundation for future TVE siting discussions.

Washington↗

USGS2017

Extension of the analytical window for characterizing aromatic compounds in oils using a comprehensive suite of high-resolution mass spectrometry techniques and double bond equivalence versus carbon number plot

In this study, comprehensive two-dimensional (2D) gas chromatography–mass spectrometry (GC–MS), atmospheric pressure photoionization (APPI) quadrupole-Orbitrap mass spectrometry (MS), and Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) were used to study the aromatic fractions of crude oil and oil shale pyrolysates (shale oils). The collected data were compared and combined in the double bond equivalence (DBE) versus carbon number plot to obtain a more complete understanding of the composition of the oil fractions. The numbers of peaks observed by each technique followed the order 2D GC–MS < Orbitrap MS < FT-ICR MS. The class distributions observed by Orbitrap MS and FT-ICR MS were similar to each other but different from that observed by 2D GC–MS. The DBE and carbon number distributions of the 2D GC–MS and Orbitrap MS data were similar for crude oil aromatics. The FT-ICR MS plots of DBE and carbon number showed an extended range of higher values relative to the other methods. For the aromatic fraction of an oil shale pyrolysate generated by the Fischer assay, only a few nitrogen-containing compounds were observed by 2D GC–MS but a large number of these compounds were detected by Orbitrap MS and FT-ICR MS. This comparison clearly shows that the data obtained from these three techniques can be combined to more completely characterize oil composition. The data obtained by Orbitrap MS and FT-ICR MS agreed well with one another, and the combined DBE versus carbon number plot provided more complete coverage of compounds present in the fractions. In addition, the chemical structure information provided by 2D GC–MS could be matched with the chemical formulas in the DBE versus carbon number plots, providing information not available in ultrahigh-resolution MS results. It was therefore concluded that the combination of 2D GC–MS, Orbitrap MS, and FT-ICR MS in the DBE versus carbon number space facilitates structural assignment of heavy oil components.

Energy & Fuels↗

USGS2015

Groundwater quality in Geauga County, Ohio: status, including detection frequency of methane in water wells, 2009, and changes during 1978-2009

Domestic wells that are not safeguarded by regular water-quality testing provide drinking water for 79 percent of the residents of Geauga County, in northeastern Ohio. Since 1978, the U.S. Geological Survey (USGS) has worked cooperatively with the Board of Commissioners and Geauga County Planning Commission to monitor the quality of groundwater in four commonly used aquifers in county—the glacial deposits, the Pottsville Formation, the Cuyahoga Group, and the Berea Sandstone. A 33-percent growth in population from 1980 to 2009 increased the potential for humans to influence groundwater resources by withdrawing more groundwater, disposing of more human waste near the land surface, treating an expanded network of township roads with deicing salt, and likely using more solvents, pesticides, and other chemicals on the land surface than were used in preceding decades. To describe the status of groundwater quality in 2009 and its suitability for drinking, USGS personnel collected samples of water prior to treatment from 16 wells (mostly domestic) during June 9–19. The samples were analyzed for 92 properties and constituents, 41 of which had human-health benchmarks to which analytical results could be compared to evaluate suitability for drinking. Four of these benchmarks were exceeded at the following frequencies: arsenic (2 of 16 wells, 12.5 percent), total coliform bacteria (2 of 16 wells, 12.5 percent), fecal coliform bacteria (1 of 14 wells, 7 percent), and sodium (6 of 16 wells, 38 percent). No domestic wells sampled in 2009 exceeded the health-based benchmark of 300 micrograms per liter (µg/L) for manganese, although 5 of 65 wells (8 percent) sampled since 1978 have. Analyses from domestic wells were augmented with water-quality data from seven public-supply well fields that were obtained from the Ohio Environmental Protection Agency. These public-supply data were typically collected between 2000 and 2010 and represent water samples that were collected prior to treatment or that were treated by a method that does not effectively remove the constituents of interest. Similar to the domestic-well data, these data indicated that some samples from public-supply wells have also exceeded health-based benchmarks for arsenic and sodium, along with occasional exceedances of health-based benchmarks for cadmium and lead. Concentrations of nitrate, pesticides, and volatile organic compounds in ground-water samples from domestic and (or) public-supply wells were either considerably less than the human-health benchmarks for these constituents or were not detected. Water-quality data collected in 2009 were also compared to aesthetically based benchmarks developed by the U.S. Environmental Protection Agency, called Secondary Maximum Contaminant Levels (SMCLs). Iron and manganese most frequently exceeded SMCLs (in samples from 10 of 16 domestic wells and in untreated water from 3 of 4 public-supply well fields). To evaluate the frequency of methane detection in water wells in the county, the USGS sampled 16 wells across the county and screened the samples for combustible gas within the headspace (the air above the water in a closed container). Water from three (19 percent) of the wells contained detectable combustible gas (0.10 to 0.40 percent by volume). All three detections were from wells tapping the Cuyahoga Group or the Berea Sandstone, and all detections were less than the lower explosive limit of 5 percent by volume—the concentration at which methane in air can be flammable if an ignition source is present. Analyses of dissolved gas composition in water from these three wells showed methane concentrations ranging from 0.007 to 1.8 milligrams per liter (mg/L). The primary effect of human activities on groundwater quality found during this study is the input of salinity, or chloride, near land surface. On the basis of ratios of chloride to bromide, the main sources of chloride are road salt and septic leachate rather than oil-field brines (either spilled at land surface or sprayed on roads for dust control). The correlation of chloride concentration to distance of well from road for 31 wells in the county sampled by the U.S. Geological Survey in 1999 suggests that road salt is the dominant source of chloride. The majority of constituents exceeding health-based and aesthetically based benchmarks in groundwater were those that are naturally present in aquifer rocks and sediments rather than constituents introduced by human activities. Concentrations of such natural contaminants are controlled by geochemical processes in the subsurface, particularly by oxidation-reduction (redox) reactions. The categorization of redox conditions based on the water quality of 116 samples collected from 65 wells in Geauga County during 1978 through 2009 indicates that most groundwater samples were strongly reducing (60 percent) or oxic (18 percent). Oxic waters were found only in the Pottsville Formation and Berea Sandstone and were generally associated with nitrate at concentrations of 0.38 to 6.0 mg/L. Strongly reducing waters occurred in all four commonly used aquifers and were associated with the following naturally occurring contaminants: (1) arsenic and manganese at concentrations exceeding the health-based benchmarks (10 µg/L and 300 µg/L, respectively) in some samples, (2) iron and manganese at concentrations exceeding the aesthetically based standards (300 µg/L and 50 µg/L, respectively) in most samples, and (3) total sulfides (consisting of hydrogen sulfide gas with its characteristic rotten-egg odor and [or] iron sulfide minerals that appear as finely disseminated particulates in water). Because of the association of redox conditions with specific contaminants, attempts were made to further document spatially where oxic and strongly reducing conditions occur so that contaminant occurrence can be better anticipated by planners and well owners. Within the Pottsville Formation, wells tapping strongly reducing groundwater tended to have a greater thickness of overlying low-permeability (recharge-inhibiting) material such as clay and shale than other wells tapping oxic or nitrate-reducing groundwater. In the Berea Sandstone, oxic conditions were found at well locations where either depth to groundwater was shallow (less than 45 feet [ft] below land surface) or the measured water level was within the open interval (uncased portion) of the well, whereas strongly reducing groundwater was found at well locations where depths to water were greater than 60 ft below land surface and measured water levels were 15 ft or more above the open interval of the well. To evaluate whether constituent concentrations consistently increased or decreased over time, the strength of the association between sampling year (time) and constituent concentration was statistically evaluated for 116 water-quality samples collected by the USGS in 1978, 1980, 1986, 1999, and 2009 from a total of 65 wells across the county (generally domestic wells or wells serving small businesses or churches). Results indicate that many of the constituents that have been analyzed for decades exhibited no consistent temporal trends at a statistically significant level (p-value less than 0.05); fluctuations in concentrations of these constituents represent natural variation in groundwater quality. Dissolved oxygen, calcium, and sulfate concentrations and chloride:bromide ratios increased over time in one or more aquifers, while pH and concentrations of bromide and dissolved organic carbon decreased over time. Detections of total coliform bacteria and nitrate did not become more frequent from 1986 to 2009, even though potential sources of these constituents, such as number of septic systems (linked to population) and percent developed land in the county, increased during this period.

Geauga County↗

USGS2012

Discovering shared segments on the migration route of the bar-headed goose by time-based plane-sweeping trajectory clustering

We propose a new method to help ornithologists and ecologists discover shared segments on the migratory pathway of the bar-headed geese by time-based plane-sweeping trajectory clustering. We present a density-based time parameterized line segment clustering algorithm, which extends traditional comparable clustering algorithms from temporal and spatial dimensions. We present a time-based plane-sweeping trajectory clustering algorithm to reveal the dynamic evolution of spatial-temporal object clusters and discover common motion patterns of bar-headed geese in the process of migration. Experiments are performed on GPS-based satellite telemetry data from bar-headed geese and results demonstrate our algorithms can correctly discover shared segments of the bar-headed geese migratory pathway. We also present findings on the migratory behavior of bar-headed geese determined from this new analytical approach.

Journal of Information and Computational Science↗

USGS1979

Concentration and fractionation of hydrophobic organic acid constituents from natural waters by liquid chromatography

A scheme is presented which used adsorption chromatography with pH gradient elution and size-exclusion chromatography to concentrate and separate hydrophobic organic acids from water. A review of chromatographic processes involved in the flow scheme is also presented. Organic analytes which appear in each aqueous fraction are quantified by dissolved organic carbon analysis. Hydrophobic organic acids in a water sample are concentrated on a porous acrylic resin. These acids usually constitute approximately 30-50 percent of the dissolved organic carbon in an unpolluted water sample and are eluted with an aqueous eluent (dilute base). The concentrate is then passed through a column of polyacryloylmorpholine gel, which separates the acids into high- and low-molecular-weight fractions. The high- and low-molecular-weight eluates are reconcentrated by adsorption chromatography, then are eluted with a pH gradient into strong acids (predominately carboxylic acids) and weak acids (predominately phenolic compounds). For standard compounds and samples of unpolluted waters, the scheme fractionates humic substances into strong and weak acid fractions that are separated from the low molecular weight acids. A new method utilizing conductivity is also presented to estimate the acidic components in the methanol fraction.

Water Supply Paper↗