Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Water Supply Paper”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73Linked to original sources
USGS1969

A ground-water reconnaissance of the Republic of Ghana, with a description of geohydrologic provinces

This report gives a general summary of the availability and use of ground water and describes the occurrence of ground water in five major geohydrologic provinces lying in the eight administrative regions of Ghana. The identification and delineation of the geohydrologic provinces are based on their distinctive characteristics with respect to the occurrence and availability of ground water. The Precambrian province occupies the southern, western, and northern parts of Ghana and is underlain largely by intrusive crystalline and metasedimentary rocks. The Voltaian province includes that part of the Voltaian sedimentary basin in central Ghana and is underlain chiefly by consolidated sandstone, mudstone, and shale. Narrow discontinuous bands of consolidated Devonian and Jurassic sedimentary rocks near the coast constitute the Coastal Block Fault province. The Coastal Plain province includes semiconsolidated to unconsolidated sediments of Cretaceous to Holocene age that underlie coastal plain areas in southwestern and southeastern Ghana. The Alluvial province includes the Quaternary alluvial deposits in the principal river valleys and on the delta of the Volta River. Because of the widespread distribution of crystalline and consolidated sedimentary rocks of low permeability in the Precambrian, Voltaian, and Coastal Block Fault provinces, it is difficult to develop large or event adequate groundwater supplies in much of Ghana. On the other hand, small (1 to 50 gallons per minute) supplies of water of usable quality are available from carefully sited boreholes in most parts of the country. Also, moderate (50 to 200 gpm) supplies of water are currently (1964) obtained from small-diameter screened boreholes tapping sand and limestone aquifers in the Coastal Plain province in southwestern and southeastern Ghana, but larger supplies could be obtained through properly constructed boreholes. In the Alluvial province, unconsolidated deposits in the larger stream valleys that are now largely undeveloped offer desirable locations for shallow vertical or horizontal wells, which can induce infiltration from streams and yield moderate to large water supplies. The principal factors that limit development of ground-water supplies in Ghana are (1) prevailing low permeability and water-yielding potential of the crystalline and consolidated sedimentary rocks that underlie most of the country, (2) highly mineralized ground water which appears to be widely distributed in the northern part of the Voltaian province, and (3) potential problems of salt-water encroachment in the Coastal Plain province in the Western Region and in the Keta area. On the other hand, weathering has increased porosity and has thus substantially increased the water-yielding potential of the crystalline and consolidated sedimentary rocks in much of central and northern Ghana. Also, with proper construction and development, much larger yields than those now (1964) prevalent could be obtained from boreholes tapping sand and limestone aquifers in the Coastal Plain province.

Water Supply Paper↗
USGS1973

Aquifers in the Sokoto basin, northwestern Nigeria, with a description of the general hydrogeology of the region

The Sokoto Basin of northwestern Nigeria lies in the sub-Saharan Sudan belt of west Africa in a zone of savannah-type vegetation. Rainfall, averaging about 30 inches annually in much of the basin, occurs chiefly in a wet season which lasts from May to October. A prolonged dry season extending from October to April is dominated by dusty harmattan winds from the northeast. April and May are the hottest months, when temperatures occasionally reach 105?F. Flow in streams of the Sokoto Basin is mostly overland runoff. Only in a few reaches, fed by ground-water discharge from the sedimentary rocks, are streams perennial. In the River Zamfara basin, ground-water discharge contributes almost 1 inch of the average 3.33 inches of total annual runoff. In the vicinity of Sokoto, the River Rima flows throughout the year sustained by spring discharge from perched ground water in limestone of the Kalambaina Formation. On the crystalline terrane where most of the streams rise, total annual runoff may exceed 5 inches, very little of which is ground-water discharge. The sedimentary rocks of the basin range in age from Cretaceous to Tertiary and are composed mostly of interbedded sand, clay, and some limestone; the beds dip gently toward the northwest. Alluvium of Quaternary age underlies the lowlands of the River Sokoto (now Sokoto) and its principal tributaries. These rocks contain three important artesian aquifers, in addition to regional unconfined ground-water bodies in all the principal outcron areas, and a perched water body in the outcrop of the Kalambaina Formation. Artesian aquifers occur at depth in the Gundumi Formation, the Rima Group, and the Gwandu Formation and are separated from one another by clay beds in the lower part of the Rima Group and the Dange Formation. In outcrop, clay in the Dange Formation also supports the perched water of the Kalambaina Formation. The Gundumi Formation, resting on the basement complex, is composed of varicolored clay, sand, and gravel and attains a thickness of 800 to 1,000 feet in its downdip extensions. Most of the formation is thin bedded and clayey and therefore does not yield large quantities of water to boreholes; the average yield is 2,700 gph (gallons per hour). (All gallons are imperial gallons.) Nevertheless, the upper part of the formation is sandy and more permeable and forms a regional artesian aquifer from which yields of as much as 6,600 gph are obtained from single boreholes. Clay in the lower part of the Rima Group confines the Gundumi aquifer downdip, so that at Rabah and Sokoto, for example, in the River Sokoto fadama (valley floor), artesian flow is found in boreholes screened in the Gundumi. Aquifer tests indicate low transmissivities, ranging from 300 to 5,000 gpd per ft (gallons per day per foot) in the lower part of the Gundumi Formation; but in the upper sandy zone the transmissivities are much higher, reaching 66,000 gpd per ft. In the western part of the Sokoto Basin, more productive aquifers with higher heads usually lie above the Gundumi aquifer so that it is not attractive for development, except in the River Sokoto fadama where artesian flow is possible. The Illo Group, which is in part contemporaneous with the Gundumi Formation, includes interbedded varicolored clay and grit in the southern part of the Sokoto Basin. The upper part of the Illo is known to be water-bearing; however, except for the test borehole at Mungadi, little is known of its subsurface extent and water-yielding potential. Overlying the Gundumi Formation in the central and northern part of the Sokoto Basin are interbedded fine gray sand and dark gray clay of the Wurno and Taloka Formations, separated in the extreme north by clay shale of the Dukamaje Formation. Collectively known as the Rima Group, these sediments attain a thickness of more than 1,000 feet near the Niger border. At depth and downdip the clayey beds practically disappear; the sandy beds become thicker and coar

Water Supply Paper↗
USGS1972

Significance of ground-water chemistry in performance of North Sahara Tube wells in Algeria and Tunisia

Nine ground-water samples from the principal shallow and deep North Sahara aquifers of Algeria and Tunisia were examined to determine the relation of their chemical composition to corrosion and mineral encrustation thought to be contributing to observed decline in well capacities within a UNESCO/UNDP Special Fund Project area. Although the shallow and deep waters differ significantly in certain quality factors, all are sulfochloride types with corrosion potentials ranging from moderate to extreme. None appear to be sufficiently supersaturated with troublesome mineral species to cause rapid or severe encrustation of filter pipes or other well parts. However, calcium carbonate encrustation of deep-well cooling towers and related irrigation pipes can be expected because of loss of carbon dioxide and water during evaporative cooling. Corrosion products, particularly iron sulfide, can be expected to deposit in wells producing waters from the deep aquifers. This could reduce filterpipe openings and increase casing roughness sufficiently to cause significant reduction in well capacity. It seems likely, however, that normal pressure reduction due to exploitation of the artesian systems is a more important control of well performance. If troublesome corrosion and related encrustation are confirmed by downhole inspection, use of corrosion-resisting materials, such as fiber-glass casing and saw-slotted filter pipe (shallow wells only), or stainless-steel screen, will minimize the effects of the waters represented by these samples. A combination of corrosion-resisting stainless steel filter pipe electrically insulated from the casing with a nonconductive spacer and cathodic protection will minimize external corrosion of steel casing, if this is found to be a problem. However, such installations are difficult to make in very deep wells and difficult to control in remote areas. Both the shallow waters and the deep waters examined in this study will tend to cause soil salinization because their salt contents are relatively high, and both have sodium absorption ratios which are unfavorable to sodium-sensitive soils and vegetation. Proper drainage and soil treatment are the only means of overcoming these problems during irrigation.

Water Supply Paper↗
USGS1979

The corrosive well waters of Egypt's western desert

The discovery that ground waters of Egypt's Western Desert are highly corrosive is lost in antiquity. Inhabitants of the oases have been aware of the troublesome property for many decades and early investigators mention it in their reports concerning the area. Introduction of modern well-drilling techniques and replacements of native wood casing with steel during the 20th century increased corrosion problems and, in what is called the New Valley Project, led to an intense search for causes and corrective treatments. This revealed that extreme corrosiveness results from combined effects of relatively acidic waters with significant concentrations of destructive sulfide ion; unfavorable ratios of sulfate and chloride to less aggressive ions; mineral equilibria and electrode potential which hinder formation of protective films; relative high chemical reaction rates because of abnormal temperatures, and high surface velocities related to well design. There is general agreement among investigators that conventional corrosion control methods such as coating metal surfaces, chemical treatment of the water, and electrolytic protection with impressed current and sacrificial electrodes are ineffective or impracticable for wells in the Western Desert's New Valley. Thus, control must be sought through the use of materials more resistant to corrosion than plain carbon steel wherever well screens and casings are necessary. Of the alternatives considered, stainless steel appears to. be the most promising where high strength and long-term services are required and the alloy's relatively high cost is acceptable. Epoxy resin-bonded fiberglass and wood appear to be practicable, relatively inexpensive alternatives for installations which do. not exceed their strength limitations. Other materials such as high strength aluminum and Monel Metal have shown sufficient promise to. merit their consideration in particular locations and uses. The limited experience with pumping in these desert wells leaves uncertainties concerning the durability of conventional pump designs. Egypt's New Valley Project provides an excellent opportunity for continuing study of the corrosion problems that concern ground-water developers in many parts of the world.

Water Supply Paper↗
USGS1965

Water resources in the vicinity of municipalities on the western Mesabi Iron Range, northeastern Minnesota

Additional supplies of water are available near the municipalities on the western Mesabi Iron Range. Potential yields from both ground-water and surface-water sources are good. The most productive aquifers for ground-water supplies are the Biwabik Iron-Formation and the stratified glacial drift. Areas of stratified drift believed to have good water potential have been outlined. The most abundant surface-water supplies in the area of this report are from the Mississippi River and its tributaries. The ground water is generally hard and has a high concentration of iron and manganese. The surface water is generally high in iron and is colored. Analyses of water from many sources are included. Data from many wells and test holes are given as are flow data for two discharge stations.

Minnesota↗
USGS1965

Water resources in the vicinity of municipalities on the west-central Mesabi Iron Range, northeastern Minnesota

Additional supplies of water are available near the municipalities or the west-central Mesabi Iron Range. The largest sources are the ground-water aquifers in the Biwabik Iron-Formation and the stratified glacial drift. Areas of stratified drift that probably have good water potential have been outlined. Surface-water supplies are negligible in the eastern part of this area but increase toward the west. Flow records from one gaging station, results of discharge measurements at two miscellaneous sites, and data from many wells and test holes are presented. Most of the ground water is hard and has a high concentration of iron and manganese. The surface water generally has a high concentration of. iron and is colored. Analyses of water from many sources are .shown.

Minnesota↗
USGS1965

Water resources in the vicinity of municipalities on the central Mesabi Iron Range, northeastern Minnesota

Additional supplies of water are available near the municipalities on the central Mesabi Iron Range. Ground water presents the greatest potential yield, and most of the productive aquifers are in the Biwabik Iron-Formation and the stratified glacial drift. /k single body of ice-contact stratified drift underlies parts of all but one of the five municipality areas mapped. Surface-water supplies are generally inadequate. The Two River system in the eastern part of the area of this report offers some possibilities. Flow data from one discharge station and one miscellaneous gaging site are presented. Analyses of water from many sources are presented as are data from many wells and test holes. Ground water commonly has a concentration of high iron and manganese and is hard. Surface water generally has a high concentration of iron and is colored.

Minnesota↗
USGS1965

Water resources in the vicinity of municipalities on the east-central Mesabi Iron Range, northeastern Minnesota

Additional supplies of water are available near the municipalities on the east-central Mesabi Iron Range. Both ground water and surface water offer good potential supplies. For the ground-water supplies, the most productive aquifers are the Biwabik Iron Formation and the stratified glacial drift. Surface-water supplies are variable. Streams in the western part of the report area are too small to yield supplies of importance, but lakes are a good potential supply. Eveleth and Gilbert are the only towns presently utilizing this source. In the eastern part of the area of this report, the Pike and Embarrass Rivers offer good potential supplies. Flow records from two gaging stations are presented as are data from many wells and test holes. Surface water generally has a high concentration of iron and is colored. Most ground water has a high concentration of iron and manganese and is hard. Analyses of water from many sources are presented.

Minnesota↗
USGS1965

Water resources in the vicinity of municipalities on the eastern Mesabi Iron Range and the Vermilion Iron Range, northeastern Minnesota

Additional supplies of water are available near the municipalities on the eastern Mesabi Iron Range and the Vermilion Iron Range. On the eastern Mesabi Range the potential for additional development of both ground-water and surface-water supplies are good, and on the Vermilion Range the best potential for development is from surface-water resources. The most productive aquifers in the area of this report are the Biwabik Iron-Formation and the stratified glacial drift; Bast of Colby Lake the Biwabik Iron-Formation is not an important aquifer, and it is entirely absent on the Vermilion Range. Also, on the Vermilion Range the glacial drift is generally too thin to yield the quantities of water found on the Mesabi Range. Surface-water supplies in the area of this report are good. An extensive network of river systems and many lakes form a large untapped potential supply. Records of flow from eight gaging stations are presented as are data from many wells and test holes. Ground water commonly has a high concentration of iron and manganese and is hard. Surface water generally has a high concentration of iron and is colored. Analyses of water from many sources are included.

Minnesota↗
USGS1965

Water in Georgia

Explore the source record for details and available documents.

Georgia↗
USGS1964

Ground-water geology of the Dickson, Lawrenceburg, and Waverly areas in the western Highland Rim, Tennessee

Ground-water supplies in the Dickson, Lawrenceburg, and Waverly areas are obtained from wells and springs in limestone and chert formations of Missisippian age. In the Dickson area most of the wells and springs are in Warsaw Limestone. In the Lawrenceburg and Waverly areas, ground-water supplies are obtained from Fort Payne Chert and from residuum. In all three areas a few wells obtain small amounts of water from gravel stringers in the residuum. Yields of well range from a few to 300 gpm (gallons per minute). Wells having the largest yields obtain water from residual material (colluvium) in the valley of Trace Creek in the Waverly area. Fewer than 10 percent of all wells inventoried yield more than 25 gpm. Springs are common in all the areas studied and yield as much as 1,000 gpm. The quality of water from wells and springs iv the areas studied generally is good. The water is of the calcium bicarbonate type, and most of it is moderately hard to hard. The constituents in water from springs and from wells are about the same, although water from springs tends to be softer and slightly lower in dissolved-solids content. Springs constitute the largest potential source of water in the three areas. Twenty-one of the large springs discharge approximately 12 million gallons per day, or about 8,000 gpm. Another potential source of water is residuum underlying the valley of Trace Creek in the Waverly area. Wells yielding as much as 500 gpm probably could be developed in this aquifer.

Tennessee↗