Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Planning”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73Linked to original sources

Synthesis of studies in the fall low-salinity zone of the San Francisco Estuary, September-December 2011

In fall 2011, a large-scale investigation (fall low-salinity habitat investigation) was implemented by the Bureau of Reclamation in cooperation with the Interagency Ecological Program to explore hypotheses about the ecological role of low-salinity habitat in the San Francisco Estuary—specifically, hypotheses about the importance of fall low-salinity habitat to the biology of delta smelt Hypomesus transpacificus , a species endemic to the San Francisco Estuary and listed as threatened or endangered under federal and state endangered species legislation. The Interagency Ecological Program is a consortium of 10 agencies that work together to develop a better understanding of the ecology of the Estuary and the effects of the State Water Project and Federal Central Valley Project operations on the physical, chemical, and biological conditions of the San Francisco Estuary. The fall low-salinity habitat investigation constitutes one of the actions stipulated in the Reasonable and Prudent Alternative issued with the 2008 Biological Opinion of the U.S. Fish and Wildlife Service, which called for adaptive management of fall Sacramento-San Joaquin Delta outflow following “wet” and “above normal” water years to alleviate jeopardy to delta smelt and adverse modification of delta smelt critical habitat. The basic hypothesis of the adaptive management of fall low-salinity habitat is that greater outflows move the low-salinity zone (salinity 1–6), an important component of delta smelt habitat, westward and that moving the low-salinity zone westward of its position in the fall of recent years will benefit delta smelt, although the specific mechanisms providing such benefit are uncertain. An adaptive management plan was prepared to guide implementation of the adaptive management of fall low-salinity habitat and to reduce uncertainty. This report has three major objectives: • To provide a summary of the results from the first year of coordinated fall low-salinity habitat studies and monitoring. • To provide a synthesis of the results of the fall low-salinity habitat studies and other ongoing research and monitoring, to determine if the available information supports the hypotheses behind the adaptive management of fall low-salinity habitat as set forth in the adaptive management plan. • To begin to put the results from the fall low-salinity habitat studies into context within the larger body of knowledge regarding the San Francisco Estuary and, in particular, the upper San Francisco Estuary, including the Sacramento-San Joaquin Delta, Suisun Bay, and associated embayments. The basic approach of this report is to evaluate predictions derived from the hypotheses included in the conceptual model developed within the adaptive management plan. All available data from studies and monitoring conducted in fall 2011 and similar data from fall 2006, which was the most recent wet year preceding 2011, were considered. Data from 2005 and 2010 were also considered, to include the conditions antecedent to those years. Many of the predictions either could not be evaluated with the data available, or the needed data were not collected. Most of the predictions that could be addressed involved either the abiotic habitat components (that is, the physical environment) or delta smelt responses. In general, the fall low-salinity habitat investigation has been largely inconclusive as of the writing of this report. This is not to be unexpected in the first year of what is intended to be a multi-year adaptive-management effort. This report can be viewed as the first chapter of a “living document” that is to be continually updated as part of the adaptive management cycle. The results of this report, especially predictions with insufficient data for evaluation, indicate a number of science-based approaches to improve the fall low-salinity habitat investigations: • Develop a method of measuring “hydrodynamic complexity.” This concept is central to a number of the predictions that could not be evaluated. • Determine if wind speed warrants a stand-alone prediction. The wind-speed prediction is directly related to the turbidity predictions, and wind is only one of several factors important for determining turbidity. • Determine the correct spatial and temporal scale or scales necessary for monitoring and for studies to address the predicted abiotic and biotic responses. Many of the assessments in this report were based on monthly sampling of dynamic habitat components, such as phytoplankton and zooplankton populations, that can change on daily scales. • Address the nutrient predictions as part of developing a phytoplankton production model that includes nutrient cycling and other important processes, if feasible. At a minimum develop a mechanistic conceptual model to support more processed-based interpretations of data or design of new studies, rather than making simple predictions of increase or decrease. • Determine if studies of predation rates are feasible in areas where there are delta smelt.

California↗

Social-value maps for Arapaho, Roosevelt, Medicine Bow, Routt, and White River National Forests, Colorado and Wyoming

Executive Summary The continued pressures of population growth on the life-sustaining, economic, and cultural ecosystem services provided by our national forests, particularly those located near rapidly growing urban areas, present ongoing challenges to forest managers. Achieving an effective assessment of these ecosystem services includes a proper accounting of the ecological, economic, and social values attributable to them. However, assessments of ecosystem goods and services notably lack information describing the spatial distribution and relative intensity of social values—the perceived, nonmarket values derived particularly from cultural ecosystem services. A geographic information system (GIS) tool developed to fill this need, Social Values for Ecosystem Services (SolVES; http://solves.cr.usgs.gov ), now provides the capability to generate social-value maps at a range of spatial scales. This report presents some of the methods behind SolVES, procedures needed to apply the tool, the first formal map products resulting from its application at a regional scale, and a discussion of the management implications associated with this type of information. In this study, we use SolVES to identify the location and relative intensity of social values as derived from survey responses gathered from residents living in counties adjacent to Arapaho, Roosevelt, Medicine Bow, Routt, and White River National Forests. The results, presented as a series of social-value maps, represent the first publicly available spatial data on social-value intensity for the southern Rocky Mountain region. Our analysis identified high-value areas for social values including aesthetic, biodiversity, and life sustaining within wilderness areas. Other values, like recreation, show high-value areas both within wilderness and throughout the general forest areas, which can be attributed to people using the forests for a diverse set of recreational activities. The economic social-value type was lower within wilderness areas, which was an expected outcome because of the restrictions inside wilderness areas that preclude resource extraction, development, and motorized or mechanized recreation. Providing spatially explicit social-value information collected from residents in counties adjacent to these national forests can assist in facilitating the U.S. Department of Agriculture Forest Service’s Multiple-Use Sustained-Yield Act of 1960 (16 U.S.C. 528) note and the 2012 Forest Service Planning Rule (36 CFR Part 219), which encourage public participation in planning and management. By making these maps available to the public, we hope to encourage exploration of potential uses of these data for resource management and planning.

Colorado, Wyoming↗

Water quality and quantity and simulated surface-water and groundwater flow in the Laurel Hill Creek Basin, southwestern Pennsylvania, 1991–2007

Laurel Hill Creek is considered one of the most pristine waterways in southwestern Pennsylvania and has high recreational value as a high-quality cold-water fishery; however, the upper parts of the basin have documented water-quality impairments. Groundwater and surface water are withdrawn for public water supply and the basin has been identified as a Critical Water Planning Area (CWPA) under the State Water Plan. The U.S. Geological Survey, in cooperation with the Somerset County Conservation District, collected data and developed modeling tools to support the assessment of water-quality and water-quantity issues for a basin designated as a CWPA. Streams, springs, and groundwater wells were sampled for water quality in 2007. Streamflows were measured concurrent with water-quality sampling at main-stem sites on Laurel Hill Creek and tributaries in 2007. Stream temperatures were monitored continuously at five main-stem sites from 2007 to 2010. Water usage in the basin was summarized for 2003 and 2009 and a Water-Analysis Screening Tool (WAST) developed for the Pennsylvania State Water Plan was implemented to determine whether the water use in the basin exceeded the “safe yield” or “ the amount of water that can be withdrawn from a water resource over a period of time without impairing the long-term utility of a water resource .” A groundwater and surface-water flow (GSFLOW) model was developed for Laurel Hill Creek and calibrated to the measured daily streamflow from 1991 to 2007 for the streamflow-gaging station near the outlet of the basin at Ursina, Pa. The CWPA designation requires an assessment of current and future water use. The calibrated GSFLOW model can be used to assess the hydrologic effects of future changes in water use and land use in the basin. Analyses of samples collected for surface-water quality during base-flow conditions indicate that the highest nutrient concentrations in the main stem of Laurel Hill Creek were at sites in the northeastern part of the basin where agricultural activity is prominent. All of the total nitrogen (N) and a majority of the total phosphorus (P) concentrations in the main stem exceeded regional nutrient criteria levels of 0.31 and 0.01 milligrams per liter (mg/L), respectively. The highest total N and total P concentrations in the main stem were 1.42 and 0.06 mg/L, respectively. Tributary sites with the highest nutrient concentrations are in subbasins where treated wastewater is discharged, such as Kooser Run and Lost Creek. The highest total N and total P concentrations in subbasins were 3.45 and 0.11 mg/L, respectively. Dissolved chloride and sodium concentrations were highest in the upper part of the basin downstream from Interstate 76 because of road deicing salts. The mean base-flow concentrations of dissolved chloride and sodium were 117 and 77 mg/L, respectively, in samples from the main stem just below Interstate 76, and the mean concentrations in Clear Run were 210 and 118 mg/L, compared to concentrations less than 15 mg/L in tributaries that were not affected by highway runoff. Water quality in forested tributary subbasins underlain by the Allegheny and Pottsville Formations was influenced by acidic precipitation and, to a lesser extent, the underlying geology as indicated by pH values less than 5.0 and corresponding specific conductance ranging from 26 to 288 microsiemens per centimeter at 25 degrees Celsius for some samples; in contrast, pH values for main stem sites ranged from 6.6 to 8.5. Manganese (Mn) was the only dissolved constituent in the surface-water samples that exceeded the secondary maximum contaminant level (SMCL). More than one-half the samples from the main stem had Mn concentrations exceeding the SMCL level of 50 micrograms per liter (μg/L), whereas only 19 percent of samples from tributaries exceeded the SMCL for Mn. Stream temperatures along the main stem of Laurel Hill Creek became higher moving downstream. During the summer months of June through August, the daily mean temperatures at the five sites exceeded the limit of 18.9 degrees Celsius (°C) for a cold-water fishery. The maximum instantaneous values for each site ranged from 27.2 to 32.8 °C. Water-quality samples collected at groundwater sites (wells and springs) indicate that wells developed within the Mauch Chunk Formation had the best water quality, whereas wells developed within the Allegheny and Pottsville Formations yielded the poorest water quality. Waters from the Mauch Chunk Formation had the highest median pH (7.6) and alkalinity (80 mg/L calcium carbonate) values. The lowest pH and alkalinity median values were in waters from the Allegheny and Pottsville Formations. Groundwater samples collected from wells in the Allegheny and Pottsville Formations also had the highest concentrations of dissolved iron (Fe) and dissolved Mn. Seventy-eight percent of the groundwater samples collected from the Allegheny Formation exceeded the SMCL of 300 μg/L for Fe and 50 μg/L for Mn. Forty-three and 62 percent of the groundwater samples collected from the Pottsville Formation exceeded the SMCL for iron and Mn, respectively. The highest Fe and Mn concentrations for surface waters were measured for tributaries draining the Pottsville Formation. The highest median Fe concentration for tributaries was in samples from streams draining the Allegheny Formation. During base-flow conditions, the streamflow per unit area along the main stem of Laurel Hill Creek was lowest in the upper parts of the basin [farthest upstream site 0.07 cubic foot per second per square mile (ft 3 /s/mi 2 )] and highest (two sites averaging about 0.20 (ft 3 /s/mi 2 ) immediately downstream from Laurel Hill Lake in the center of the basin. Tributaries with the highest streamflow per unit area were those subbasins that drain the western ridge of the Laurel Hill Creek Basin. The mean streamflow per unit area for tributaries draining areas that extend into the western ridge and draining eastern or central sections was 0.24 and 0.05 ft 3 /s/mi 2 , respectively. In general, as the drainage area increased for tributary basins, the streamflow per unit area increased. Criteria established by the Pennsylvania Department of Environmental Protection indicate that the safe yield of water withdrawals from the Laurel Hill Creek Basin is 1.43 million gallons per day (Mgal/d). Water-use data for 2009 indicate that net (water withdrawals subtracted by water discharges) water withdrawals from groundwater and surface-water sources in the basin were approximately 1.93 Mgal/d. Water withdrawals were concentrated in the upper part of the basin with approximately 80 percent of the withdrawals occurring in the upper 36 mi 2 of the basin. Three subbasins—Allen Creek, Kooser Run, and Shafer Run— in the upper part were affected the most by water withdrawals such that safe yields were exceeded by more than 1,000 percent in the first two and more than 500 percent in the other. In the subbasin of Shafer Run, intermittent streamflow characterizes sections that historically have been perennial. The GSFLOW model of the Laurel Hill Creek Basin is a simple one-layer representation of the groundwater flow system. The GSFLOW model was primarily calibrated to reduce the error term associated with base-flow periods. The total amount of observed streamflow at the Laurel Hill Creek at Ursina, Pa. streamflow-gaging station and the simulated streamflow were within 0.1 percent over the entire modeled period; however, annual differences between simulated and observed streamflow showed a range of -27 to 24 percent from 1992 to 2007 with nine of the years having less than a 10-percent difference. The primary source of simulated streamflow in the GSFLOW model was the subsurface (interflow; 62 percent), followed by groundwater (25 percent) and surface runoff (13 percent). Most of the simulated subsurface flow that reached the stream was in the form of slow flow as opposed to preferential (fast) interflow.

Pennsylvania↗

Precipitation runoff modeling system (PRMS) as part of an integrated hydrologic model for the Osage Nation, northeastern Oklahoma, 1915–2014

Executive Summary The Osage Nation lacks a comprehensive tribal water plan to describe the quality and quantity of water resources in the Osage Nation, a 2,304-square-mile (mi 2 ) area of rolling pastures, tallgrass prairie, and mixed woodlands in northeastern Oklahoma. A tribal water plan can be used to help manage the sustainable development of surface and groundwater resources, thereby helping to provide a better future for the Osage Nation and their neighbors, while preserving water resources for the benefit of the surrounding environment and future generations. To help meet these goals and contribute to increased knowledge of the quantity and quality of water resources and the hydrologic processes and factors affecting those resources, the U.S. Geological Survey (USGS) in cooperation with the Osage Nation began studies to evaluate the surface-water and groundwater resources of the Osage Nation. An important component of these studies is the development and application of numerical models to improve quantification and understanding of the hydrologic system. These models are needed to estimate and quantify the effects of historical and potential future water resource development for the Osage Nation. This report describes the development and application of a precipitation-runoff model, the Osage Nation watershed model (ONWM). The ONWM is needed as a component of the Osage Nation integrated hydrologic model (ONIHM). At the time of this study, the ONIHM was being developed using the USGS computer software MODFLOW-One Water Hydrologic Flow Model (MODFLOW-OWHM). The intended use of the ONIHM is to simulate all surface-water and groundwater components of the hydrologic system for a 2,905-mi 2 study area centered on the Osage Nation. The ONWM was developed using the USGS Precipitation Runoff Modeling System, version 4 (PRMS-IV) computer software, also referred to as PRMS in this report, for an 8,343-mi 2 study area in northeastern Oklahoma and southeastern Kansas, centered on and including the areas of the Osage Nation and the ONIHM. The ONWM is to be used as part of the ONIHM to provide a direct coupling with spatially and temporally varying daily climate conditions affecting the ONIHM study area. As an integral part of the ONIHM, the ONWM (1) simulates the inflow boundary conditions from tributary basins in the region outside and surrounding the ONIHM area; (2) provides estimates of spatially and temporally distributed precipitation, air temperature, potential evapotranspiration (PET), actual evapotranspiration (ET), soil moisture, recharge, and streamflow in the ONIHM area; and (3) provides a preliminary water budget for the ONIHM area and the surrounding region, including tributary drainage basins outside of and next to the ONIHM. The specific objectives of this study were to use the ONWM to (1) provide a systematic inventory of the historical distribution of water inflows from precipitation (rain or snow) falling on the land surface and flowing through the surface-water network, (2) provide a historical context of the variability and spatial and temporal distribution of these waters, and (3) provide estimates of water inflows and potential observations to the ONIHM. The application of the ONWM as a component of the ONIHM is needed for planned simulations using the ONIHM to improve the understanding of the hydrologic system and to develop a fully comprehensive water budget, including the use and movement of water across the landscape, in the surface-water network, and in groundwater aquifers under historical and potential future conditions.

Oklahoma↗

Summary of climatic, geographic, geologic, and available hydrologic data and identification of data gaps for the Black Bear Creek watershed of the Pawnee Nation Tribal Jurisdictional Area, Oklahoma

The Pawnee Nation is compiling a comprehensive water-management plan for the Pawnee Nation Tribal Jurisdictional Area in north-central Oklahoma. One of the first steps needed in preparing such a plan is a summary and analysis of available hydrologic data and reports that have been published for the area. In phase I of a three-phase, watershed-based approach to summary and analysis of water resources of the Pawnee Nation, the U.S. Geological Survey, in cooperation with the Pawnee Nation and Bureau of Indian Affairs, conducted a literature search and data analysis for the Black Bear Creek watershed within the Pawnee Nation Tribal Jurisdictional Area, referred to herein as the “Black Bear Creek study area.” This report summarizes the available data for the Black Bear Creek study area. Climatic, geographic, geologic, water-use, and hydrologic data from previously published reports or databases were collected and analyzed for this report. Because of the limited amount of groundwater-quality data for the study area, a field collection of groundwater levels and water samples was conducted. Sixteen wells were identified, and groundwater levels were measured at each well. Eight wells were sampled, and water properties, major ions, and nutrients were measured. Overall, there are few long-term monitoring stations to help determine trends of surface-water quality, groundwater quality, and groundwater levels across the study area. Establishing and maintaining long-term streamflow, surface-water-quality, groundwater-level, and groundwater-quality monitoring sites would greatly increase the understanding of the water resources in the Black Bear Creek study area. Additionally, water-use estimates would be greatly improved by metering groundwater withdrawals. Establishing hydrologic and water-quality trends and having improved estimates of water use can aid decision makers in the stewardship of the water resources in this area. This report can aid the Pawnee Nation in prioritization of future projects and serve as a background document for the development of a jurisdiction-wide comprehensive water-management plan.

Oklahoma↗

Hydrologic site assessment for passive treatment of groundwater nitrogen with permeable reactive barriers, Cape Cod, Massachusetts

Wastewater disposal associated with rapid population growth and development on Cape Cod, Massachusetts, during the past several decades has resulted in widespread contamination of groundwater with nitrogen. As a result, water quality in many of the streams, lakes, and coastal embayments on Cape Cod is impaired by excess nitrogen. To reduce nitrogen loads to these impaired water bodies, watershed-based planning is currently [2019] underway following a regional strategy, the section 208 areawide water-quality management plan update for Cape Cod. In the updated plan, traditional (sewering) and alternative wastewater management options are under consideration for restoring water quality in impaired surface-water bodies. Permeable reactive barriers, which are reactive zones emplaced below the water table for passive treatment of groundwater contaminants, are one of the alternatives being considered by Cape Cod towns as a potentially cost-effective technology for the removal of nitrogen from groundwater. However, the effectiveness of permeable reactive barriers depends on local conditions, and site-specific hydrologic and water-quality data are needed to inform the decision to install a permeable reactive barrier in a given location. These data are not available in most locations on Cape Cod; consequently, site assessments are needed before selecting this treatment option. To address this need, the U.S. Environmental Protection Agency, U.S. Geological Survey, and Cape Cod Commission formed a technical team in 2015 to develop and evaluate a hydrologic site-assessment approach for permeable reactive barrier installation. The approach developed by the technical team includes a preliminary regional assessment followed by a phased onsite investigation. The approach was intended to provide the hydrologic data needed to make informed decisions on site suitability and to support installation and monitoring should the site be deemed appropriate for a permeable reactive barrier. The factors that were evaluated to characterize local hydrologic conditions and inform site selection included groundwater flow directions and rates, depth to the water table, hydraulic conductivity and degree of heterogeneity of the aquifer, spatial distribution and concentration of nitrate and oxidation-reduction-sensitive constituents, thickness and depth of the treatment zone, distance to downgradient water bodies, and access for drilling and permeable reactive barrier installation. The approach was demonstrated on Cape Cod by conducting a preliminary assessment of 27 sites, from which 5 sites were selected for onsite investigations. Results indicated that the site-assessment approach was successful for screening sites and characterizing the geologic, hydrologic, and water-quality conditions at the sites selected for onsite investigations. Overall, the phased assessment evaluated in this study provided an efficient means of obtaining the hydrologic information needed to determine if a site was suitable for permeable reactive barrier installation on Cape Cod for the passive treatment of nitrogen in groundwater.

Massachusetts↗

The lava flow that came to Hilo—The 1880–81 eruption of Mauna Loa volcano, Island of Hawai‘i

The Mauna Loa eruption sequence of 1880–81 consists of two eruptions. The May 1880 eruption in Mokuʻāweoweo at the summit of Mauna Loa lasted just a few days and was followed 6 months later by three lava flows that issued from vents along the Northeast Rift Zone. The November 1880 eruption lasted almost a year and one of its flows nearly reached Hilo Bay. Public reaction in Hilo to the advancing lava flow increased as the lava got closer, but a smallpox quarantine prevented travelers and government officials from leaving Honolulu, the government seat of the Hawaiian Kingdom, until July 1881. In the King’s absence, his sister Princess Regent Liliʻuokalani and key officials met in Hilo at the beginning of August to plan a government response. This included the first known plan to use barriers and explosives to divert the lava flow in Hawaiʻi. Fortunately, the lava flow stopped before the plan was enacted; however, both Christian prayer and traditional Hawaiian chants and gifts to the Hawaiian deity Pele were offered in the last few weeks of lava activity. Mauna Loa was again restless in 2019 and the time seems optimum to review this and other Mauna Loa flows, in order to be ready for the next lava flow. Should the next flow threaten developed areas, review of past lava flow threats may provide valuable experience on how the public may best be provided with information.

Hawaii↗

Landscape evolution in eastern Chuckwalla Valley, Riverside County, California

This study investigates sedimentary and geomorphic processes in eastern Chuckwalla Valley, Riverside County, California, a region of arid, basin-and-range terrain where extensive solar-energy development is planned. The objectives of this study were to (1) measure local weather parameters and use them to model aeolian sediment-transport potential; (2) identify surface sedimentary characteristics in representative localities; and (3) evaluate long-term landscape evolution rates and processes by analyzing stratigraphy in combination with luminescence geochronology. The new stratigraphic and geochronologic data presented in this report demonstrate the varying local significance of aeolian, alluvial fan, lacustrine (playa), and possibly Colorado River influence over a range of time scales. The dominant sand-transport direction in eastern Chuckwalla Valley is toward the northeast, consistent with the recognized regional west-to-east wind direction. However, occasional strong wind events from the north can transport large quantities of sand southward and temporarily reshape local geomorphic features. Influence of a northwest wind direction is also locally dominant around mountain ranges and controls the modern morphology of the Palen dune field. Modeled sand fluxes are on the order of 10 5 kilograms per meter width per year at the site of weather monitoring, 5 kilometers northwest of the Mule Mountains. Aeolian dunes are locally well developed and actively migrating. Their location and activity are determined largely by sediment supply from playa surfaces and ephemeral stream channels, which also control the dunes’ spatial extent and migration potential; stream channels act as both source and sink for aeolian sediment in this environment. Excavations at five sites along a northwest-to-southeast transect reveal that playa deposits formed around 266–226 thousand years ago south of the McCoy Mountains and immediately north of the present location of Interstate 10. The playa material is overlain by late Pleistocene to Holocene alluvial fan deposits. To the southeast (south of Interstate 10, but north of the Mule Mountains), we identified rapid accumulation of alluvial sediment around the time of the Last Glacial Maximum (23–20 thousand years ago), unconformably overlain by a locally varying assemblage of recent aeolian material or Holocene alluvial fan sediment. We have used stratigraphic characteristics and luminescence ages to calculate accumulation rates for sites in eastern Chuckwalla Valley, and thereby to identify spatial variation in landscape stability over decadal and longer time scales. If future solar-energy development plans are to include natural sand-transport corridors, plans would entail retaining the ability for sand to be transported eastward from the ephemeral stream channels and playas that supply sediment to the dunes, sand sheets, and sand ramps of Chuckwalla Valley, and also to allow for southward transport during episodic strong weather events several times per year. The aeolian sediment-transport corridors are dynamic spatially and temporally, reorganizing on the basis of seasonal changes to wind drift potential. Future landscape stability also will be determined by climate-driven changes to vegetation and thereby to aeolian sediment availability. In a warmer, drier climate, aeolian sediment activity is expected to increase, owing to a decrease in stabilizing vegetation cover and more extreme rain that supplies sediment to ephemeral stream channels and playas from which it is remobilized by wind.

California↗

Moderate flood level scenarios—Synthetic storm-driven flood-inundation maps for coastal communities in 10 New Jersey counties

The U.S. Geological Survey (USGS), in cooperation with the New Jersey Department of Environmental Protection (NJDEP) and the New Jersey Office of Emergency Management (NJOEM), created digital flood-inundation maps for approximately 1,430 square miles of the New Jersey coast and tidewaters through 10 coastal counties stretching from Cumberland County through Bergen County, New Jersey. The maps depict extent and depth estimates of coastal flooding corresponding to selected tidal elevations recorded by 25 real-time USGS tide gages located within the study area. The flood-inundation maps can be accessed through the USGS Interagency Flood Risk Management (InFRM) Flood Decision Support Toolbox (FDST). Previously published modeled data were utilized from the coupled ADvanced CIRCulation Model (ADCIRC) and Simulating Waves Nearshore (SWAN) model. Simulated tropical storm events were selected based on parameters including landfall location or closest approach location, maximum wind speed, central pressure, and radii of winds. Two storm events were selected per tide gage providing two “scenarios” and accompanying inundation-map libraries for each gage. Flood-inundation maps reflect between 9 to 30 stages (elevations) at each tide gage that correspond to areal extents and depths for ADCIRC-SWAN storm time steps extracted from modeled hydrographs at the gage locations. Water-surface elevations from ADCIRC-SWAN node points extending through each tide gage station extent were used to interpolate a water surface. Combining these surfaces with a geographic information system (GIS) topobathymetric digital elevation model (TBDEM) delineated the area flooded by coastal waters at each tide gage elevation. The availability of these maps to visualize potential inundation for selected water levels along with real-time water level data available online from USGS tide gages, coastal impact statements, and forecasted tide elevations from the National Weather Service (NWS) will provide emergency management personnel and residents with a link between numeric and text warning information and images of estimated inundation extents in their community. User selected display of inundation allows early response activities to NWS forecasted water level elevations or mitigation planning by selecting targeted water levels and planning critical pre-flood activities such as building elevations, early traffic pattern changes because of neighborhood building inundation levels, improved understanding about when major road access is affected, as well as for post-flood recovery efforts. A subsequent analysis of several community metrics including total structures, structure density, percent of buildings inundated, and roads and bridges affected by flooding was used to evaluate moderate flooding impacts among the mapped station extents. Initial comparisons are presented to show the variability of these characteristics within each mapped station extent then extended to evaluate impacts from moderate flooding on these same areas. The analysis used simulated inundation layers at the moderate flood stage to investigate the magnitude of inundation on building structures and major roads among the mapped station extents. Experimental equations were developed to begin testing if a mathematical equation could help identify communities that were disproportionately impacted at moderate flood stage. The community analysis of impacts to moderate flooding based on these inundation scenario maps should provide community leaders and local and state planning officials with tools to better visualize and understand how flooding begins to disrupt and damage building structures and major roads as a surrogate for direct increased risk to human life and property.

New Jersey↗

The Science Application for Risk Reduction (SAFRR) Scenario Retrospective 2006–21

The U.S. Geological Survey Science Application for Risk Reduction (SAFRR) Project has created four major hazard scenarios—ShakeOut, ARkStorm, Tsunami Scenario, and HayWired—with multidisciplinary teams of scientists, academics, and practitioners. By presenting a clear and highly detailed narrative of potential damage from earthquakes, tsunamis, and winter storms, the scenarios are intended to foster science-based preparedness strategies and disaster risk reduction innovations. This evaluation explores the presence of these scenarios in cultures of preparedness and their role in disaster risk reduction, and reports barriers and enablers to creating and using these scenarios. To do this, the evaluation team developed a mixed-methods study that includes background research for each scenario, qualitative interviews, data collection of media and academic engagement, and examples of SAFRR scenario use in hazard planning. The data collection led to the development of a hazard scenario evaluation tool that combines theories from multiple disciplines to create a best practice set of categories that aid in scenario use and efficacy. The evaluation tool categories—actionable, longitudinal, educational, relevant, and thorough—are organized as a series of checklists that are used to determine how the scenario planners prioritized different aspects of the scenarios to achieve their goals. The tool could also be used to aid scenario planning for other regional disaster risk reduction scenarios of a similar scope. Findings from this evaluation include detailed narratives of scenario use over time, demonstrating that the scenarios have continued to be useful in hazard planning and preparedness across the globe. Examples of use include using the scenarios to advocate for resilient building and development policy, to promote hazard response exercises, and as source data for the development of new hazard models and science. The scenarios themselves are innovative, both in the hazard science created for scenario development and in their branding and public engagement as U.S. Geological Survey products. This SAFFR retrospective is a descriptive evaluation and does not formally address the effects of the scenarios. Nevertheless, this report does include evidence of scenario affects as discovered through qualitative interviews and research, which is presented to explore how the SAFRR scenarios have been received by cultures of preparedness.

Scientific Investigations Report↗

Introduction to recommended capabilities and instrumentation for volcano monitoring in the United States

Introduction The National Volcano Early Warning System (NVEWS) was authorized and partially funded by the U.S. Government in 2019. In response, the U.S. Geological Survey (USGS) Volcano Hazards Program asked its scientists to reflect on and summarize their views of best practices for volcano monitoring. The goal was to review and update the recommendations of a previous report (Moran and others, 2008) and to provide a more detailed analysis of capabilities and instrumentation for monitoring networks for U.S. volcanoes. This Scientific Investigations Report and its chapters reflect those USGS scientists’ views and summaries and will serve as a guide for future network upgrades funded through NVEWS. Given the well-documented hazards posed by volcanoes to population centers and aviation (for example, Blong, 1984; Scott, 1989; Neal and others, 1997, 2019; Guffanti and others, 2010; Shroder and Papale, 2014; Prata and Rose, 2015; Palmer, 2020), volcano monitoring is critical for ensuring public safety and for mitigating the impacts of volcanic activity. Accurate and timely forecasts are facilitated by well-designed monitoring networks that are in place long enough to allow for background behavior to be recognized and understood. Because precursory signals may be limited and unrest may progress rapidly to an eruption, our goal is to deploy monitoring systems that enable detection of the reactivation of dormant volcanoes as early as possible, allowing for public safety and risk mitigation. NVEWS planning is also informed by the results of Ewert and others (2005, 2018), whereby 161 U.S. volcanoes are currently categorized and ranked commensurate with their relative threat. In each chapter, author(s) considered the need for some redundancy of instrumentation and telemetry, given the likelihood of occasional equipment failure, particularly in extreme and remote environments. Establishing digital telemetry networks requires advanced planning, sighting, radio-shot testing, and, inevitably, troubleshooting in the field. This is harder to achieve rapidly during a crisis; thus, an important goal for monitoring U.S. volcanoes is to establish digital telemetry backbones with redundancy and extra capacity to absorb additional instruments should a volcano begin to exhibit signs of unrest (fig. A1). The National Telecommunications and Information Administration (NTIA) imposed new regulations in the United States, eliminating the use of older analog radios for many purposes, which had been one previous means for redundant data delivery. However, the resulting conversion from analog to digital systems usefully enables stations to accommodate new and multivariate real-time data streams (for example, Global Navigation Satellite System [GNSS] receivers, infrasound arrays, gas spectrometers, visible and infrared cameras, and broadband seismometers). We note that other USGS and broader national and international hazard programs can leverage NVEWS instrumentation plans. Examples of this include the following: Improved seismic coverage of volcanoes will increase the capability of the USGS Earthquake Hazards Program to detect and locate earthquakes, estimate ground shaking, and provide timely early warnings through the ShakeAlert Earthquake Early Warning System (Given and others, 2018). The National Oceanic and Atmospheric Administration’s Tsunami Program will benefit from additional seismic stations, particularly within the sparsely instrumented Aleutian Islands, Northern Mariana Islands, and American Samoa. Infrasound stations can detect signals from landslides, debris flows and lahars, floods, and weather events, providing benefits to the National Weather Service and the USGS Landslide Hazards Program.

Scientific Investigations Report↗

Bison population dynamics, harvest, and conflict potential under feedground management alternatives at the National Elk Refuge in Jackson, Wyoming

Bison bison (bison) were once abundant across North America but declined due to overharvesting in the late 1800s. The reintroduced population in and around Jackson, Wyoming has averaged 485 individuals between 2018–2023 and is the subject of a planning process to inform management strategies that will guide the U.S. Fish and Wildlife’s next “Bison and Elk Management Plan” for the National Elk Refuge. This small population may benefit from historical winter-feeding operations on the National Elk Refuge because those operations may increase overwinter survival and limit human-bison conflicts, which are the number of individual bison that engage in nuisance, damaging, or otherwise aggressive behaviors with humans and livestock, that may lead to culling and other sources of mortality (for example, vehicle collisions). To inform the next “Bison and Elk Management Plan,” the U.S. Geological Survey used a population model to evaluate five management alternatives for bison and Cervus elaphus canadensis (elk) feedground operations that included continuing the elk and bison feeding program, immediately stopping the feeding program, and three other alternatives that would phase out the feeding program after a period of time. The results indicate that the bison population would be expected to decline over the next 20 years under all alternatives that stop feeding bison on the refuge. Further, this decline would lead to an associated reduction in bison harvest opportunities for resident, nonresident, and Tribal hunters. Finally, human-bison conflicts would also be expected to increase under the no feeding alternatives because bison may venture onto private lands in greater numbers if feed is not provisioned during winter months. In combination, these effects suggest that feeding may lead to better outcomes for bison over the next 20 years; however, these effects may be traded off against other downsides of the feedground program, such as increased rates of animal-to-animal contact on feedgrounds that can lead to disease transmission.

Wyoming↗

Bison population dynamics, harvest, and human conflict potential under feedground management alternatives at the National Elk Refuge in Jackson, Wyoming

Bison bison were once abundant across North America but declined due to overharvesting in the late 1800s. The reintroduced population in and around Jackson, Wyoming has averaged 485 individuals between 2018–2023 and is the subject of a planning process to inform management strategies that will guide the U.S. Fish and Wildlife’s next “Bison and Elk Management Plan” for the National Elk Refuge. This small population may benefit from historical winter-feeding operations on the National Elk Refuge because those operations may increase overwinter survival and limit human-bison conflicts, which are the number of individual bison that engage in nuisance, damaging, or otherwise aggressive behaviors with humans and livestock, that may lead to culling and other sources of mortality (for example, vehicle collisions). To inform the next “Bison and Elk Management Plan,” the U.S. Geological Survey used a population model to evaluate five management alternatives for bison and Cervus elaphus canadensis feedground operations that included continuing the elk and bison feeding program, immediately stopping the feeding program, and three other alternatives that would phase out the feeding program after a period of time. The results indicate that the bison population would be expected to decline over the next 20 years under all alternatives that stop feeding bison on the refuge. Further, this decline would lead to an associated reduction in bison harvest opportunities for resident, nonresident, and Tribal hunters. Finally, human-bison conflicts would also be expected to increase under the no feeding alternatives because bison may venture onto private lands in greater numbers if feed is not provisioned during winter months. In combination, these results suggest that feeding may lead to better outcomes for bison over the next 20 years; however, these effects may be traded off against other downsides of the feedground program, such as increased rates of animal-to-animal contact on feedgrounds that can lead to disease transmission.

Wyoming↗

Preparations for water sampling

The “National Field Manual for the Collection of Water-Quality Data” (NFM) provides guidelines and procedures for U.S. Geological Survey (USGS) personnel who collect data used to assess the quality of the Nation’s surface-water and groundwater resources. This chapter, NFM A1, provides an overview of preparations for water sampling, which includes site reconnaissance, project work plans, quality-assurance plans, basic equipment and supplies needed for fieldwork, safety precautions, and planning for data management. It updates and supersedes USGS Techniques of Water-Resources Investigations, book 9, chapter A1, version 2.0, by F.D. Wilde. Before 2017, the NFM chapters were released in the USGS Techniques of Water-Resources Investigations series. Effective in 2018, new and revised NFM chapters are being released in the USGS Techniques and Methods series; this series change does not affect the content and format of the NFM. More information is in the general introduction to the NFM (USGS Techniques and Methods, book 9, chapter A0) at https://doi.org/10.3133/tm9A0 . The authoritative current versions of NFM chapters are available in the USGS Publications Warehouse at https://pubs.er.usgs.gov/ . Comments, questions, and suggestions related to the NFM can be addressed to nfm-owq@usgs.gov .

Techniques and Methods↗

Design of a shallow ground-water network to monitor agricultural chemicals, Lake Wales Ridge, central Florida

Extensive agricultural land use and dynamic hydraulic connections between the land surface and ground-water resources render many of Florida's aquifers vulnerable to chemical contamination. In these areas, there is a need to monitor shallow ground water for agricultural chemicals to evaluate potential migration of the chemicals to the subsurface and to deeper aquifers, and to assess the effects of agricultural practices on ground-water quality. Historically, efforts to monitor water-table aquifers have been minimal compared with monitoring deeper aquifers used for municipal drinking-water supply. The Florida Department of Agriculture and Consumer Services has proposed the establishment of long-term, water-quality networks to monitor shallow ground water in agricultural areas of Florida. These networks will bridge the current information gap between local-scale short-duration field studies, which are required for pesticide licensing, and statewide monitoring of deeper ground-water resources. Laboratory (experimental) and short-term field evaluations of the transport of agricultural chemicals to the subsurface contain some degree of uncertainty due to widespread variations in environmental conditions. The proposed regional-scale shallow ground-water networks will serve as "early warning" networks to avoid contamination of ground-water resources. The objectives of these shallow ground-water networks are to provide information for early detection of pesticides and nitrate in the subsurface, and for evaluating temporal trends in concentrations in relation to changes in land use and agricultural practices. Information on trends is important to the U.S. Environmental Protection Agency, State agencies, and agricultural managers, and is an integral part of Florida's Pesticide Management Plan, which evaluates the effectiveness of implementing "best management practices" to minimize environmental impacts. Lake Wales Ridge in Polk and Highlands Counties has been identified by the Florida Department of Agriculture and Consumer Services as a pilot study area for implementing a regional shallow ground-water network. Information gained from designing the Lake Wales Ridge Network will be used to develop plans as similar networks are considered for other areas of Florida. Lake Wales Ridge is heavily utilized for citrus production, but the well-drained, clean sands underlying the region, coupled with a hydraulic connection with deeper karst formations, render the area extremely vulnerable to the transport and migration of agricultural chemicals within the subsurface. The network design for Lake Wales Ridge was developed on the basis of the objectives of monitoring, factors affecting aquifer vulnerability, probability (statistical) sampling theory, and specifications regarding well construction, sampling, and laboratory analysis. The network will provide estimates of regional pesticide and nitrate concentrations in targeted ground water, monitor for trends over time, and will provide baseline, regional-scale information. The areas targeted for sampling were citrus groves located on soils classified as vulnerable to leaching of agricultural chemicals, and ground water in close proximity to the water table. The duration of monitoring is planned to be long term. Chemicals targeted for monitoring include selected nutrients, trace elements, and pesticides used for citrus management. Standardization of field sampling and laboratory methods, and construction of a computerized data-base repository will be important for long-term utility of the data. The proposed network design consists of existing and newly drilled wells. Existing wells were evaluated as candidates for the network based on location and well-construction specifications for water-quality monitoring. Using probability selection techniques, new well locations were selected in areas that lacked adequate existing wells. Implementation of the network will occur in phases. Quarterly sampling of 13 Phase I wells commenced in April 1999. An additional 11 Phase II wells were added to the network in April 2000. Proposed locations have been identified for 8 Phase III wells. Future topics for study include a regional water-quality analysis, a network design evaluation, and consideration of local-scale studies needed to support regional monitoring efforts. An analysis of historical water-quality data for Lake Wales Ridge, including Phase I wells, is needed for the purpose of examining trends, providing a preliminary description of spatial and short-term variability in water quality, and evaluating the proposed network design for cost effectively meeting program objectives. Local-scale, process-oriented studies are needed to provide important information for evaluating regional water-quality data. Coordination between individuals conducting such local-scale studies and those interpreting regional sampling results will be considered as a component of the network design, and will require coordination between multiple agencies.

Florida↗

Simulation of a proposed emergency outlet from Devils Lake, North Dakota

From 1993 to 2001, Devils Lake rose more than 25 feet, flooding farmland, roads, and structures around the lake and causing more than $400 million in damages in the Devils Lake Basin. In July 2001, the level of Devils Lake was at 1,448.0 feet above sea level 1 , which was the highest lake level in more than 160 years. The lake could continue to rise to several feet above its natural spill elevation to the Sheyenne River (1,459 feet above sea level) in future years, causing extensive additional flooding in the basin and, in the event of an uncontrolled natural spill, downstream in the Red River of the North Basin as well. The outlet simulation model described in this report was developed to determine the potential effects of various outlet alternatives on the future lake levels and water quality of Devils Lake. Lake levels of Devils Lake are controlled largely by precipitation on the lake surface, evaporation from the lake surface, and surface inflow. For this study, a monthly water-balance model was developed to compute the change in total volume of Devils Lake, and a regression model was used to estimate monthly water-balance data on the basis of limited recorded data. Estimated coefficients for the regression model indicated fitted precipitation on the lake surface was greater than measured precipitation in most months, fitted evaporation from the lake surface was less than estimated evaporation in most months, and ungaged inflow was about 2 percent of gaged inflow in most months. Dissolved sulfate was considered to be the key water-quality constituent for evaluating the effects of a proposed outlet on downstream water quality. Because large differences in sulfate concentrations existed among the various bays of Devils Lake, monthly water-balance data were used to develop detailed water and sulfate mass-balance models to compute changes in sulfate load for each of six major storage compartments in response to precipitation, evaporation, inflow, and outflow from each compartment. The storage compartments--five for Devils Lake and one for Stump Lake--were connected by bridge openings, culverts, or natural channels that restricted mixing between compartments. A numerical algorithm was developed to calculate inflow and outflow from each compartment. Sulfate loads for the storage compartments first were calculated using the assumptions that no interaction occurred between the bottom sediments and the water column and no wind- or buoyancy-induced mixing occurred between compartments. However, because the fitted sulfate loads did not agree with the estimated sulfate loads, which were obtained from recorded sulfate concentrations, components were added to the sulfate mass-balance model to account for the flux of sulfate between bottom sediments and the lake and for mixing between storage compartments. Mixing between compartments can occur during periods of open water because of wind and during periods of ice cover because of water-density differences between compartments. Sulfate loads calculated using the sulfate mass-balance model with sediment interaction and mixing between compartments closely matched sulfate loads computed from historical concentrations. The water and sulfate mass-balance models were used to calculate potential future lake levels and sulfate concentrations for Devils Lake and Stump Lake given potential future values of monthly precipitation, evaporation, and inflow. Potential future inputs were generated using a scenario approach and a stochastic approach. In the scenario approach, historical values of precipitation, evaporation, and inflow were repeated in the future for a particular sequence of historical years. In the stochastic approach, a statistical time-series model was developed to randomly generate potential future inputs. The scenario approach was used to evaluate the effectiveness of various outlet alternatives, and the stochastic approach was used to evaluate the hydrologic and water-quality effects of the potential outlet alternatives that were selected on the basis of the scenario analysis. Given potential future lake levels and sulfate concentrations generated using either the scenario or stochastic approach and potential future ambient flows and sulfate concentrations for the Sheyenne River receiving waters, daily outlet discharges could be calculated for virtually any outlet alternative. For the scenario approach, future ambient flows and sulfate concentrations for the Sheyenne River were generated using the same sequence of years used for generating water-balance data for Devils Lake. For the stochastic approach, a procedure was developed for generating daily Sheyenne River flows and sulfate concentrations that were "in-phase" with the generated water-balance data for Devils Lake. Simulation results for the scenario approach indicated that neither of the West Bay outlet alternatives provided effective flood-damage reduction without exceeding downstream water-quality constraints. However, both Pelican Lake outlet alternatives provided significant flood-damage reduction with only minor downstream water-quality changes. The most effective alternative for controlling rising lake levels was a Pelican Lake outlet with a 480-cubic-foot-per-second pump capacity and a 250-milligram-per-liter downstream sulfate constraint. However, this plan is costly because of the high pump capacity and the requirement of a control structure on Highway 19 to control the level of Pelican Lake. A less costly, though less effective for flood-damage reduction, plan is a Pelican Lake outlet with a 300-cubic-foot-per-second pump capacity and a 250-milligram-per-liter downstream sulfate constraint. The plan is less costly because the pump capacity is smaller and because the control structure on Highway 19 is not required. The less costly Pelican Lake alternative with a 450-milligramper- liter downstream sulfate constraint rather than a 250-milligram-per-liter downstream sulfate constraint was identified by the U.S. Army Corps of Engineers as the preferred alternative for detailed design and engineering analysis. Simulation results for the stochastic approach indicated that the geologic history of lake-level fluctuations of Devils Lake for the past 2,500 years was consistent with a climatic history that consisted of two climate states--a wet state, similar to conditions during 1980-99, and a normal state, similar to conditions during 1950-78. The transition times between the wet and normal climatic periods occurred randomly. The average duration of the wet climatic periods was 20 years, and the average duration of the normal climatic periods was 120 years. The stochastic approach was used to generate 10,000 independent sequences of lake levels and sulfate concentrations for Devils Lake for water years 2001-50. Each trace began with the same starting conditions, and the duration of the current wet cycle was generated randomly for each trace. Each trace was generated for the baseline (natural) condition and for the Pelican Lake outlet with a 300-cubic-foot-per-second pump capacity and a 450-milligram-per-liter downstream sulfate constraint. The outlet significantly lowered the probabilities of future lake-level increases within the next 50 years and did not substantially increase the probabilities of reaching low lake levels or poor water-quality conditions during the same period.

Water-Resources Investigations Report↗

Simulation of Ground-Water Flow in the Middle Rio Grande Basin Between Cochiti and San Acacia, New Mexico

This report describes a three-dimensional, finite difference, ground-water-flow model of the Santa Fe Group aquifer system within the Middle Rio Grande Basin between Cochiti and San Acacia, New Mexico. The aquifer system is composed of the Santa Fe Group of middle Tertiary to Quaternary age and post-Santa Fe Group valley and basin-fill deposits of Quaternary age. Population increases in the basin since the 1940's have caused dramatic increases in ground-water withdrawals from the aquifer system, resulting in large ground-water-level declines. Because the Rio Grande is hydraulically connected to the aquifer system, these ground-water withdrawals have also decreased flow in the Rio Grande. Concern about water resources in the basin led to the development of a research plan for the basin focused on the hydrologic interaction of ground water and surface water (McAda, D.P., 1996, Plan of study to quantify the hydrologic relation between the Rio Grande and the Santa Fe Group aquifer system near Albuquerque, central New Mexico: U.S. Geological Survey Water-Resources Investigations Report 96-4006, 58 p.). A multiyear research effort followed, funded and conducted by the U.S. Geological Survey and other agencies (Bartolino, J.R., and Cole, J.C., 2002, Ground-water resources of the Middle Rio Grande Basin, New Mexico: U.S. Geological Survey Circular 1222, 132 p.). The modeling work described in this report incorporates the results of much of this work and is the culmination of this multiyear study. The purpose of the model is (1) to integrate the components of the ground-water-flow system, including the hydrologic interaction between the surface-water systems in the basin, to better understand the geohydrology of the basin and (2) to provide a tool to help water managers plan for and administer the use of basin water resources. The aquifer system is represented by nine model layers extending from the water table to the pre-Santa Fe Group basement rocks, as much as 9,000 feet below the NGVD 29. The horizontal grid contains 156 rows and 80 columns, each spaced 3,281 feet (1 kilometer) apart. The model simulates predevelopment steady-state conditions and historical transient conditions from 1900 to March 2000 in 1 steady-state and 52 historical stress periods. Average annual conditions are simulated prior to 1990, and seasonal (winter and irrigation season) conditions are simulated from 1990 to March 2000. The model simulates mountain-front, tributary, and subsurface recharge; canal, irrigation, and septic-field seepage; and ground-water withdrawal as specified-flow boundaries. The model simulates the Rio Grande, riverside drains, Jemez River, Jemez Canyon Reservoir, Cochiti Lake, riparian evapotranspiration, and interior drains as head-dependent flow boundaries. Hydrologic properties representing the Santa Fe Group aquifer system in the ground-water-flow model are horizontal hydraulic conductivity, vertical hydraulic conductivity, specific storage, and specific yield. Variable horizontal anisotropy is applied to the model so that hydraulic conductivity in the north-south direction (along model columns) is greater than hydraulic conductivity in the east-west direction (along model rows) over much of the model. This pattern of horizontal anisotropy was simulated to reflect the generally north-south orientation of faulting over much of the modeled area. With variable horizontal anisotropy, horizontal hydraulic conductivities in the model range from 0.05 to 60 feet per day. Vertical hydraulic conductivity is specified in the model as a horizontal to vertical anisotropy ratio (calculated to be 150:1 in the model) multiplied by the horizontal hydraulic conductivity along rows. Specific storage was estimated to be 2 x 10-6 per foot in the model. Specific yield was estimated to be 0.2 (dimensionless). A ground-water-flow model is a tool that can integrate the complex interactions of hydrologic boundary conditions, aquifer materials

Water-Resources Investigations Report↗

Hydrologic- and salt-balance investigations utilizing digital models Lower San Luis Rey River area, San Diego County, California

The Joint Administration Committee of the Santa Margarita and San Luis Rey Watershed Planning Agencies was designated as the agency to conduct studies leading to the development of a comprehensive water-quality management plan for the two watersheds. Hydrologic and salt balances for the Pauma, Pala, Bonsall, and Mission ground-water basins in the San Luis Rey River valley needed to develop the plan were difficult to compute because of the lack of data. Hydrologic models constructed and verified for 1958-72 for Pauma and Pala basins and for 1946-72 for Bonsall and Mission basins were beneficial in developing the hydrologic balances. Inflow and outflow to the basins used in model verification were consistent with known physical and hydrologic characteristics of the basins.

California↗