Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Northwest Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72Linked to original sources
USGS2010

Attributes for MRB_E2RF1 Catchments by Major River Basins in the Conterminous United States: NLCD 2001 Imperviousness

This tabular data set represents the mean percent impervious surface from the Imperviousness Layer of the National Land Cover Dataset 2001, (LaMotte and Wieczorek, 2010), compiled for every MRB_E2RF1 catchment of selected Major River Basins (MRBs, Crawford and others, 2006). The source data set represents imperviousness for the conterminous United States for 2001. The Imperviousness Layer of the National Land Cover Data Set for 2001 was produced through a cooperative project conducted by the Multi-Resolution Land Characteristics (MRLC) Consortium. The MRLC Consortium is a partnership of Federal agencies (http://www.mrlc.gov), consisting of the U.S. Geological Survey (USGS), the National Oceanic and Atmospheric Administration (NOAA), the U.S. Environmental Protection Agency (USEPA), the U.S. Department of Agriculture (USDA), the U.S. Forest Service (USFS), the National Park Service (NPS), the U.S. Fish and Wildlife Service (USFWS), the Bureau of Land Management (BLM), and the USDA Natural Resources Conservation Service (NRCS). The MRB_E2RF1 catchments are based on a modified version of the U.S. Environmental Protection Agency's (USEPA) ERF1_2 and include enhancements to support national and regional-scale surface-water quality modeling (Nolan and others, 2002;Brakebill and others, 2011). Data were compiled for every MRB_E2RF1 catchment for the conterminous United States covering New England and Mid-Atlantic (MRB1), South Atlantic-Gulf and Tennessee (MRB2), the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy (MRB3), the Missouri (MRB4), the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf (MRB5), the Rio Grande, Colorado, and the Great basin (MRB6), the Pacific Northwest (MRB7) river basins, and California (MRB8).

Data Series↗
USGS1972

Orbital-science investigation: Part H: sketch map of the region around the candidate Littrow Apollo landing sites

The photograph in figure 25-59 and the corresponding map (fig. 25-60) show the geology of part of the lunar surface just east of the Littrow rilles at the eastern edge of Mare Serenitatis. The most striking feature of the region is the extremely low albedo of the area mapped as Eld in the western half of the map. The low albedo is believed to be caused by a thin layer of pyroclastic volcanic material at the surface. Another notable feature is the fresh-appearing ridges that cross the mare and the adjacent terra. The fine-braided texture of these ridges contrasts markedly with the rounded, subdued topography more common to such features, an indication that the ridges here may be unusually young. Also evident is a well-exposed succession of marelike plains units, which probably represent different stages in the filling of the Serenitatis basin. Several sets of rilles are present; most are roughly tangential to the basin and terminate against the different plains units according to the relative ages. In the northwest corner of the map is a relatively fresh volcanic crater chain (Cch) from which material appears to have been ejected over the surrounding terrain, forming rays of volcanic ejecta. The area thus includes an unusually wide variety of lunar features.

Book chapter↗
USGS2022

Tree regrowth duration map from LCMAP collection 1.0 land cover products in the conterminous United States, 1985–2017

Forest covers about one-third of the land area of the conterminous United States (CONUS) and plays an important role in offsetting carbon emissions and supporting local economies. Growing interest in forests as relatively cost-effective nature-based climate solutions, particularly restoration and reforestation activities, has increased the demand for information on forest regrowth and recovery following natural and anthropogenic disturbances (e.g., fire, harvest, or thinning). However, a wall-to-wall mapping of the CONUS tree regrowth duration at an annual time interval and 30-m resolution is still challenging. In this study, we utilized the annual land cover products to develop a dataset to quantify forest regrowth duration for CONUS over 1985–2017. The land cover data used to derive the tree regrowth duration map is from the primary land cover product in the U.S. Geological Survey’s Land Change Monitoring, Assessment, and Projection (LCMAP) collection. The LCMAP product used all available Landsat images to detect disturbances over forest and classify Grass/Shrub to Tree Cover transitions on an annual basis. The average regrowth duration was then calculated for each pixel. The regrowth duration map was validated using human interpreted annual reference data that were collected independently. The validation results show one-year of underestimation and 6-year standard deviation of error between the reference data and regrowth duration map. In southeastern CONUS, where major tree regrowth activities have been observed, our map showed higher accuracy with less than one-year bias and 3.6 years standard deviation of error. Forest in the southeast took around 5 years to recover, which was faster than other regions of CONUS. Many pixels had multiple disturbances during the 33-year study period in the region. The spatial pattern of the tree regrowth indicated intense harvesting activities in this region. The Pacific Northwest coast region was the second main area of tree regrowth, but this region often took multiple decades to recover. Given increasing interest in forests as nature-based climate solutions, the tree regrowth duration map can be used to assess reforestation activities as well as forest recovery following natural disturbance and harvesting.

Conterminous United States↗
USGS1996

Tectonic model explaining divergent contraction directions along the Cascadia subduction margin, Washington

Differential motion across the central Cascadia subduction boundary in Washington results in a complex pattern of folds and faults within the shelf and onshore parts of the accretionary margin. Faults and folds above a coastal, north-northwest–trending thrust system provide evidence of ongoing subduction-related contraction. South of this coastal thrust system many fold axes and thrust faults trend east-northeast, in the direction of convergence. These structures are not consistent with a simple subduction system undergoing northeastward convergence. This deformation, adjacent to the boundary between the subduction complex and the Siletz terrane, may be driven by relative convergence between the northward-translating Siletz terrane and the subduction complex. The regional pattern of modern uplift rates is consistent with ongoing north-south contraction across this boundary and the north-south compressional stress field in the area.

Geology↗
USGS2008

Geology of Hawaii reefs

The Hawaii hot spot lies in the mantle under, or just to the south of, the Big Island of Hawaii. Two active subaerial volcanoes and one active submarine volcano reveal its productivity. Centrally located on the Pacific Plate, the hot spot is the source of the Hawaii Island Archipelago and its northern arm, the Emperor Seamount Chain (Fig. 11.1). This system of high volcanic islands and associated reefs, banks, atolls, sandy shoals, and seamounts spans over 30° of latitude across the Central and North Pacific Ocean to the Aleutian Trench, and contains at least 107 separate shield volcanoes (Clague and Dalrymple 1987). The trail of islands increases in age with distance from the hot spot (Fig. 11.2) and reflects the dynamic nature of the Pacific Plate, serving as a record of its speed and direction over the Hawaii hot spot for the last 75–80 MY (Clague and Dalrymple 1987). A major change in plate direction is marked by a northward kink in the chain at the end of the Hawaii Ridge approximately 3,500 km from the site of active volcanism (Moore 1987). On the basis of dredged basalts, Sharp and Clague (2006) assign an age of 50 Ma to this shift from northern to northwestern plate motion, thought to be a result of changes in the movement of neighboring plates to the west. Today the Pacific Plate migrates northwest at a rate of about 10 cm/year (Moore 1987).

Hawaii↗
USGS1995

Seismic Sources and Recurrence Rates as Adopted by USGS Staff for the Production of the 1982 and 1990 Probabilistic Ground Motion Maps for Alaska and the Conterminous United States

The construction of a probabilistic ground-motion hazard map for a region follows a sequence of analyses beginning with the selection of an earthquake catalog and ending with the mapping of calculated probabilistic ground-motion values (Hanson and others, 1992). An integral part of this process is the creation of sources used for the calculation of earthquake recurrence rates and ground motions. These sources consist of areas and lines that are representative of geologic or tectonic features and faults. After the design of the sources, it is necessary to arrange the coordinate points in a particular order compatible with the input format for the SEISRISK-III program (Bender and Perkins, 1987). Source zones are usually modeled as a point-rupture source. Where applicable, linear rupture sources are modeled with articulated lines, representing known faults, or a field of parallel lines, representing a generalized distribution of hypothetical faults. Based on the distribution of earthquakes throughout the individual source zones (or a collection of several sources), earthquake recurrence rates are computed for each of the sources, and a minimum and maximum magnitude is assigned. Over a period of time from 1978 to 1980 several conferences were held by the USGS to solicit information on regions of the United States for the purpose of creating source zones for computation of probabilistic ground motions (Thenhaus, 1983). As a result of these regional meetings and previous work in the Pacific Northwest, (Perkins and others, 1980), California continental shelf, (Thenhaus and others, 1980), and the Eastern outer continental shelf, (Perkins and others, 1979) a consensus set of source zones was agreed upon and subsequently used to produce a national ground motion hazard map for the United States (Algermissen and others, 1982). In this report and on the accompanying disk we provide a complete list of source areas and line sources as used for the 1982 and later 1990 seismic hazard maps for the conterminous U.S. and Alaska. These source zones are represented in the input form required for the hazard program SEISRISK-III, and they include the attenuation table and several other input parameter lines normally found at the beginning of an input data set for SEISRISK-III.

Open-File Report↗
USGS2001

Geology and mineral deposits of the Minnie Moore and Bullion mineralized areas, Blaine County, Idaho

In the early 1880?s the discovery of rich ores in the Minnie Moore and Bullion mineralized areas sparked a rush to settle and develop the Wood River valley. Silver and lead discoveries in these areas spurred the boom in mining after completion of the Oregon Short Line Railroad to Hailey in 1883. In both areas the ore comprises galena, sphalerite, and tetrahedrite in a gangue of siderite, calcite, or quartz. Minor goldbearing quartz veins are also present. The ore is in fissure and replacement veins along fracture systems that formed in Late Cretaceous time, after intrusion of nearby granodiorite or quartz diorite stocks. The ore formed under mesothermal conditions and heat was supplied by the nearby plutons. In the Minnie Moore area, the mineralized veins are cut by low-angle normal faults that are of probable Eocene age. In the Minnie Moore mineralized area, the host rock is the middle part of the Devonian Milligen Formation, (the informal Lucky Coin limestone and Triumph argillite), which is the same stratigraphic level as the host ore in the rich Triumph mine northeast of Hailey. In the Bullion mineralized area, the ore is hosted by the lower member of the Middle Pennsylvanian to Lower Permian Dollarhide Formation. Rich ore was mined in several tunnels that reached the Mayflower vein, a northwest-striking mineralized shear zone. The deposits are thought to be mainly mesothermal veins that formed in association with Cretaceous magmatism. The syngenetic stratiform model of ore formation has often been applied to these deposits, however, no evidence of syngenetic mineralization was found in this study. Faulting has displaced most of the major orebodies and thus has made mining these deposits a challenge.

Bulletin↗
USGS1981

Vertebrate fossil-bearing paleosol units (Willwood Formation, Lower Eocene, Northwest Wyoming, U.S.A.): Implications for taphonomy, biostratigraphy, and assemblage analysis

In the lower 300 m of the fluvial Willwood Formation of northwest Wyoming, most large concentrations of vertebrate fossils consist of disarticulated and broken skeletal remains that occur in widespread, tubular, thin (2 cm-1 m) greenish- and bluish-gray mudstones that are low in percentage of free iron, aluminum, and manganese, relatively high in percentages of organic carbon, and often show evidence of clay eluviation. These units lie atop sesquioxide-rich, sometimes clay-illuviated variegated unit (red, yellow, purple, and mottled variants) and are relicts of the A horizons of podzolic spodosols (aquods). The wide distribution of bone fragments, the numerical proportions of bone elements, weathering of the fragments, and biogenic evidence indicate the vertebrate remains accumulated gradually as litter on the surface of the soils and became incorporated into the A horizon. The bones were disarticulated, broken, and otherwise disturbed by the action of scavengers prior to burial. Occurrence of abundant vertebrate remains in discrete, readily identifiable, and widespread paleosol units makes these units valuable biostratigraphic markers (zonules, faunules). Evidence of geologically short-term lag accumulation of the bones is important to assemblage analysis; the paleosol concentrations result from attritional mortalities that more closely reflect composition of the life assemblage than do remains concentrated by fluvial transport or predators.

Wyoming↗
USGS1968

Minor epigenetic, diagenetic, and syngenetic sulfide, fluorite, and barite occurrences in the central United States

Metallic sulfides, fluorite , barite , and celestite are widespread in the sedimentary rocks of the central United States . Many occurrences are epigenetic concentrations either in known major mineral districts or in clusters of deposits that warrant further exploration for potential ore. Evaluation of trace-element composition, of fluid inclusions, of depositional temperature, and of isotopic composition of sulfur may help discriminate potentially economic deposits from even more widespread, probably noneconomic, syngeneic occurrences . Known major mineral districts and many promising sulfide occurrences are located along complex major fault systems and particularly over structural domes at intersections of fault systems. Economically promising sulfide deposits occur along a west-trending fault system crossing Kentucky and Missouri near the 38th parallel, particularly at associated cryptoexplosion structures along it, at the intersection of the fault system with the Cincinnati arch. Elsewhere in the central United States , promising sulfide occurrences are located along the crest of the Findlay arch, near Serpent Mound, Ohio, along the northwest-trending Mount Carmel fault in southwestern Indiana, and buried at depth in oil fields of west- central Kansas.Other types of deposits that are productive or may have some future economic interest are locally economic and possibly syngenetic red-bed copper occurrences in Oklahoma, Texas, Kansas, and Pennsylvania. Most widespread are the black shale and pyritic sandstone beds, some of which have been a source of pyrite for sulfur and sulfuric acid in conjunction with coal mining. Bedded barite deposits of possibly diagenetic origin have been mined in Arkansas. Diagenetic siderite concretions containing sulfides and barite were widespread sources of iron in the 19th century.

Economic Geology↗
USGS2003

Hydrogeology of a Biosolids-Application Site Near Deer Trail, Colorado, 1993-99

This report presents hydrogeology data and interpretations resulting from two studies related to biosolids applications at the Metro Wastewater Reclamation District property near Deer Trail, Colorado, done by the U.S. Geological Survey in cooperation with the Metro Wastewater Reclamation District: (1) a 1993-99 study of hydrology and water quality for the Metro Wastewater Reclamation District central property and (2) a 1999 study of regional bedrock-aquifer structure and local ground-water recharge. Biosolids were applied as a fertilizer during late 1993 through 1999. The 1993 Metro Wastewater Reclamation District property boundary constitutes the study area, but hydrogeologic structure maps for a much larger area are included in the report. The study area is located on the eastern margin of the Denver Basin, a bowl-shaped sequence of sedimentary rocks. The uppermost bedrock formations in the vicinity of the study area consist of the Pierre Shale, the Fox Hills Sandstone, and the Laramie Formation, parts of which comprise the Laramie-Fox Hills hydrostratigraphic unit and thus, where saturated, the Laramie-Fox Hills aquifer. In the vicinity of the study area, the Laramie-Fox Hills hydrostratigraphic unit dips gently to the northwest, crops out, and is partially eroded. The Laramie-Fox Hills aquifer is either absent or not fully saturated within the Metro Wastewater Reclamation District properties, although this aquifer is the principal aquifer used for domestic supply in the vicinity of the study area. Yield was small from two deep monitoring wells in the Laramie-Fox Hills aquifer within the study area. Depth to water in these wells was about 110 and 150 feet below land surface, and monthly water levels fluctuated 0.5 foot or less. Alluvial aquifers also are present in the unconsolidated sand and loess deposits in the valleys of the study area. Interactions of the deeper parts of the Laramie-Fox Hills aquifer with shallow ground water in the study area include a general close hydraulic connection between alluvial and bedrock aquifers, recharge of the Cottonwood Creek and much of the Muddy Creek alluvial aquifers by the bedrock aquifer, and possible recharge of the bedrock aquifer by a Rattlesnake Creek tributary. Some areas of shallow ground water were recharged by infiltration from rain or ponds, but other areas likely were recharged by other ground water. Data for shallow ground water indicate that ground-water recharge takes less than a day at some sites to about 40 years at another site. Depth to shallow ground water in the study area ranged from about 2 feet to about 37 feet below land surface. Shallow ground-water levels likely were affected by evapotranspiration. Ground water is present in shallow parts of the bedrock aquifer or in alluvial aquifers in four drainage basins: Badger Creek, Cottonwood Creek, Muddy Creek, and Rattlesnake Creek. These drainage basins generally contained only ephemeral streams, which flow only after intense rain.

Water-Resources Investigations Report↗
USGS1961

Ground-water control in the Neyveli lignite field, South Arcot district, Madras State, India

Unconsolidated deposits of the Cuddalore series of Miocene age underlie much of the coastal plain of southern Madras . Several lignite seams occur in a thick sequence of sand, gravel, and clay that dips seaward about 40 to 100 feet per mile. The principal seam of lignite mapped in the Neyveli area averages more than 50 feet in thickness, underlies at least 80 square miles, and occurs at a minimum depth of 165 feet near Neyveli , where deposits totalling 230 million tons have been proved in an area of 4J square miles. The lignite seam is immediately underlain, throughout its area of occurrence, by a thick bed of sand and gravel that contains artesian water, the head of which is more than 100 feet above the top of the lignite at Neyveli . The sand and gravel aquifer is exposed to recharge in and near its outcrop area, 6 to 10 miles northwest of Neyveli , where the average annual rainfall is 41 inches. Hydraulic tests of the aquifer indicate that ground-water control for mining by opencast from a pit 6,000 feet long and 1,200 feet wide will require continuous withdrawal of about 40,000 gallons (Imperial) per minute from wells in and adjacent to the mine. The well field , including 50 to 65 large-capacity wells, must move with the open cut; and no appreciable decrease in the withdrawal rate can be expected throughout the life of the mine, which is designed to produce about 3j million tons of raw lignite per year.

Madras State↗
USGS2007

Comparison of peak-flow estimation methods for small drainage basins in Maine

Understanding the accuracy of commonly used methods for estimating peak streamflows is important because the designs of bridges, culverts, and other river structures are based on these flows. Different methods for estimating peak streamflows were analyzed for small drainage basins in Maine. For the smallest basins, with drainage areas of 0.2 to 1.0 square mile, nine peak streamflows from actual rainfall events at four crest-stage gaging stations were modeled by the Rational Method and the Natural Resource Conservation Service TR-20 method and compared to observed peak flows. The Rational Method had a root mean square error (RMSE) of -69.7 to 230 percent (which means that approximately two thirds of the modeled flows were within -69.7 to 230 percent of the observed flows). The TR-20 method had an RMSE of -98.0 to 5,010 percent. Both the Rational Method and TR-20 underestimated the observed flows in most cases. For small basins, with drainage areas of 1.0 to 10 square miles, modeled peak flows were compared to observed statistical peak flows with return periods of 2, 50, and 100 years for 17 streams in Maine and adjoining parts of New Hampshire. Peak flows were modeled by the Rational Method, the Natural Resources Conservation Service TR-20 method, U.S. Geological Survey regression equations, and the Probabilistic Rational Method. The regression equations were the most accurate method of computing peak flows in Maine for streams with drainage areas of 1.0 to 10 square miles with an RMSE of -34.3 to 52.2 percent for 50-year peak flows. The Probabilistic Rational Method was the next most accurate method (-38.5 to 62.6 percent). The Rational Method (-56.1 to 128 percent) and particularly the TR-20 method (-76.4 to 323 percent) had much larger errors. Both the TR-20 and regression methods had similar numbers of underpredictions and overpredictions. The Rational Method overpredicted most peak flows and the Probabilistic Rational Method tended to overpredict peak flows from the smaller (less than 5 square miles) drainage basins and underpredict peak flows from larger drainage basins. The results of this study are consistent with the most comprehensive analysis of observed and modeled peak streamflows in the United States, which analyzed statistical peak flows from 70 drainage basins in the Midwest and the Northwest.

Maine↗
USGS2006

Volcanic history and 40 Ar/ 39 Ar and 14 C geochronology of Terceira Island, Azores, Portugal

Seven new 40 Ar/ 39 Ar and 23 new radiocarbon ages of eruptive units, in support of new geologic mapping, improve the known chronology of Middle to Late Pleistocene and Holocene volcanic activity on the island of Terceira, Azores and define an east-to-west progression in stratovolcano growth. The argon ages indicate that Cinco Picos Volcano, the oldest on Terceira, completed its main subaerial cone building activity by about 370–380 ka. Collapse of the upper part of the stratovolcanic edifice to form a 7 × 9 km caldera occurred some time after 370 ka. Postcaldera eruptions of basalt from cinder cones on and near the caldera floor and trachytic pyroclastic flow and pumice fall deposits from younger volcanoes west of Cinco Picos have refilled much of the caldera. The southern portion of Guilherme Moniz Volcano, in the central part of the island, began erupting prior to 270 ka and produced trachyte domes, flows, and minor pyroclastic deposits until at least 111 ka. The northern part of Guilherme Moniz Caldera is less well exposed than the southern part, but reflects a similar age range. The northwest portion of the caldera was formed sometime after 44 ka. Several well-studied ignimbrites that blanket much of the island likely erupted from Guilherme Moniz Volcano. The Pico Alto Volcanic Center, a tightly spaced cluster of trachyte domes and short flows, is a younger part of Guilherme Moniz Volcano. Stratigraphic studies and our new radiocarbon ages suggest that most of the Pico Alto eruptions occurred during the period from about 9000 to 1000 years BP. Santa Barbara Volcano is the youngest stratovolcano on Terceira, began erupting prior to 29 ka, and has been active historically.

Azores↗
USGS1991

Neogene rotations and quasicontinuous deformation of the Pacific Northwest continental margin

Paleomagnetically determined rotations about vertical axes of 15 to 12 Ma flows of the Miocene Columbia River Basalt Group of Oregon and Washington decrease smoothly with distance from the plate margin, consistent with a simple physical model for continental deformation that assumes the lithosphere behaves as a thin layer of fluid. The average rate of northward translation of the continental margin since 15 Ma calculated from the rotations, using this model, is about 15 mm/yr, which suggests that much of the tangential motion between the Juan de Fuca and North American plates since middle Miocene time has been taken up by deformation of North America. The fluid-like character of the large-scale deformation implies that the brittle upper crust follows the motions of the deeper parts of the lithosphere.

Geology↗
USGS2016

The Northeast Stream Quality Assessment

In 2016, the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) is assessing stream quality in the northeastern United States. The goal of the Northeast Stream Quality Assessment (NESQA) is to assess the quality of streams in the region by characterizing multiple water-quality factors that are stressors to aquatic life and evaluating the relation between these stressors and biological communities. The focus of NESQA in 2016 will be on the effects of urbanization and agriculture on stream quality in all or parts of eight states: Connecticut, Massachusetts, New Hampshire, New Jersey, New York, Pennsylvania, Rhode Island, and Vermont. Findings will provide the public and policymakers with information about the most critical factors affecting stream quality, thus providing insights about possible approaches to protect the health of streams in the region. The NESQA study will be the fourth regional study conducted as part of NAWQA and will be of similar design and scope to the first three, in the Midwest in 2013, the Southeast in 2014, and the Pacific Northwest in 2015 ( http://txpub.usgs.gov/RSQA/ ).

Connecticut, Massachusetts, New Hampshire, New Jer↗
USGS1978

Sediment yields for selected streams in Texas

The U.S. Geological Survey began a study to determine sediment yields for selected streams in Texas during the 1966 water year to provide information for areas in which sediment-yield data were meager or lacking. These data will aid in delineating problem areas and planning for water-resources development in the State. This report presents estimates of suspended-sediment loads and yields from 20 drainage basins ranging in area from 26 to 1,410 square miles. These estimates are based on samples collected periodically during water years 1966-74. Sediment loads ranged from 1,500 tons per year at the station North Fork Hubbard Creek near Albany to 278,000 tons per year at the station Wichita River at Wichita Falls. Sediment yields ranged from 15 tons per square mile per year in the drainage area of East Yegua Creek near Dime Box to 500 tons per square mile per year in the drainage area of Denton Creek near Justin. Sediment yields from drainage areas generally decrease from northwest to southeast across the State.

Texas↗
USGS1976

Geology of the north end of the Salt Valley Anticline, Grand County, Utah

This report describes the geology and hydrology of a portion of the Salt Valley anticline lying north of Moab, Utah, that is being studied as a potential site for underground storage of nuclear waste in salt. Selection of this area was based on recommendations made in an earlier appraisal of the potential of Paradox basin salt deposits for such use. Part of sec. 5, T. 23 S., R. 20 E. has been selected as a site for subsurface investigation as a potential repository for radioactive waste. This site has easy access to transportation, is on public land, is isolated from human habitation, is not visible from Arches National Park, and the salt body lies within about 800 feet (244 m) of the surface. Further exploration should include investigation of possible ground water in the caprock and physical exploration of the salt body to identify a thick bed of salt for use as a storage zone that can be isolated from the shaly interbeds that possibly contain quantities of hydrocarbons. Salt Valley anticline, a northwest-trending diapiric structure, consists of Mesozoic sedimentary rocks arched over a thick core of salt of the Paradox Member of the Middle Pennsylvanian Hermosa Formation. Salt began to migrate to form and/or develop this structure shortly after it was deposited, probably in response to faulting. This migration caused upwelling of the salt creating a linear positive area. This positive area, in turn, caused increased deposition of sediments in adjacent areas which further enhanced salt migration. Not until late Jurassic time had flowage of the salt slowed sufficiently to allow sediments of the Morrison and younger formations to be deposited across the salt welt. A thick cap of insoluble residue was formed on top of the salt diapir as a result of salt dissolution through time. The crest of the anticline is breached; it collapsed in two stages during the Tertiary Period. The first stage was graben collapse during the early Tertiary; the second stage occurred after Miocene regional uplift had caused downcutting streams to breach the salt core resulting in further collapse. The axis of the anticline is a narrow generally flat-floored valley containing a few hills composed of downdropped Mesozoic rocks foundered, in the caprock. The caprock, which underlies thin alluvium in the valley, is composed of contorted gypsum, shale, sandstone, and limestone--the insoluble residue of the Paradox salt.

Open-File Report↗
USGS1999

Stratigraphy and hydrologic conditions at the Brookhaven National Laboratory and vicinity, Suffolk County, New York, 1994-97

Brookhaven National Laboratory (BNL) has installed many test borings as part of an effort to delineate the extent of ground-water contamination at the site. In 1994, the U.S. Geological Survey began a study in cooperation with BNL to define the stratigraphy in the 28-square-mile area encompassing BNL, and to monitor ground-water levels in the 300 squaremile area of central Suffolk County that surrounds BNL. The uppermost geologic units at BNL are of Pleistocene age. These sediments are underlain unconformably by the Matawan Group-Magothy Formation, undifferentiated (referred to as the Magothy Formation), of Cretaceous age, which typically consists of light- to dark-gray, variably sorted sand interbedded with light- to dark-gray clay layers; it also contains beds of grayish-brown to brownish-gray sand. Bed thicknesses differ substantially within each boring and tend to be laterally discontinuous as a result of their terrestrial deltaic depositional environment, although a prominent clay unit, referred to as the ?grayish-brown clay? in this report, was encountered at many borings. Pollen-sample analyses confirm that this unit is of Cretaceous age and is the uppermost unit of Cretaceous sediments in several parts of the study area. The upper surface of the Cretaceous deposits is irregular within the 28-square-mile study area and has relief of about 120 feet. Several prominent channels and ridges in the surface are aligned generally northwest-southeast. The Cretaceous surface beneath BNL is characterized more by local erosional features than by the regional cuesta shape that was suggested by previous authors. The overlying Pleistocene-aged units include (1) a sand layer overlain by the Gardiners Clay, (2) the Gardiners Clay, and (3) upper Pleistocene deposits, which include the Upton unit, glacial outwash, glaciolacustrine deposits, and terminal moraine deposits. The sand unit below the Gardiners Clay was the first Pleistocene unit to be deposited atop the irregular surface of the Cretaceous deposits in this area. The Gardiners Clay was deposited during a major rise in sea level as the sea encroached into parts of the present-day BNL study area. The shallow part of the upper Pleistocene deposits generally consists of light-brown sand and gravel but overlies green to grayish-green, variably sorted sand, silt, and clay at altitudes of 50 to 70 feet below sea level in some parts of the study area. This lower part of the upper Pleistocene deposits in the study area was referred to by previous investigators as the unidentified unit and has been designated as the Upton unit in this report. The discharge of ground water to the Peconic and Carmans Rivers locally affects the water-table configuration. The main ground-water divide on Long Island is about 0.5 miles north of the site; a secondary divide originates near the start of flow of the Peconic River and extends east-southeastward toward the South Fork. The water-table configuration on the BNL site is affected by pumping from supply wells and remediation wells, by infiltration of the water through recharge basins, by discharge from the sewage-treatment plant, and by local near-surface clay units. The horizontal hydraulic gradient at BNL typically is 0.001 foot per foot but can steepen near recharge basins and pumping wells. Vertical flow gradients within the upper Pleistocene deposits (upper glacial aquifer) were as large as 0.007 foot per foot (downward) in the northern part of BNL and were negligible in the southern part. Downward vertical gradients between the lower part of the upper glacial aquifer and the upper part of the Magothy Formation (Magothy aquifer) were about 0.018 foot per foot throughout the site.

Water-Resources Investigations Report↗