Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geologic Map Series”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72Linked to original sources

Geology of the State of Morelos and contiguous areas in south-central Mexico

The area described lies in south-central Mexico and embraces all but the southeastern corner and easternmost border of the State of Moreles, the second smallest State in the Mexican Republic. It includes small contiguous parts of the State of Mexico, in the northeastern corner, and of the State of Guerrero in the southwestern corner. Limiting geographic coordinates are 98 45 to 99 39 west longitude and 18 18 to 19 08 north latitude, the northern boundary being only 35 km south of Mexico City, capital of the Republic. The geological map does not cover the entire rectangle outlined, but is irregular in form and measures roughly 4150 sq. km, three-quarters of it representing two0thirds of the State of Moreles and the rest lying outside the State. The region ranges in altitude from 730 m above sea level at Iguala near the south edge of the map, to a general level of about 3000 m at the north edge, although individual peaks rise to 3900 m and Popocatepetl Volcano, a few kilometers east of the northeastern border of the map, rises to 5452 m above sea level. Annual rainfall ranges from a minimum of about 640 mm in the low country, to 1200 mm and more at altitudes above 2000 m. Most of it falls in summer between June and September. Winter frosts are rare below 1800 m. The climate is of savanna to steppe type; soils are thin and may be classified as belonging to the tachernoses group, with strong development of calcareous evaporates (caliche) at altitudes below 1800 m. The northern border of the area forms the southern half of the late Pliocene to Recent Neo-volcanic Belt of basic volcanism that crosses Mexico in the direction N. 80 W., and thus has constructional topography. The rest of the area belongs to the Balsas Basin physiographic province, which is characterized by maturely dissected terrain tributary to the large Balsas River. All but the southwestern corner of the area drains southward via the Amacuzac River into the Mexcala-Balsas River, and thence westward into the Pacific Ocean. The southwestern corner drains directly into the Balsas River via the Iguala River. Local relief is of the order of 300 to 600 m. The mature topography was partly buried by late Pliocene alluvium in the central part of the area, owing largely to local volcanism. Dissolution of limestone, dolomite, and anhydrite of the Cretaceous formations has produced sinks and poljes, some of which contain small lakes. Other karst features are also common, such as caves, caverns, underground rivers, and surficial lapies or karren. Drainage blocking by lava and polje development in late Pleistocene and Recent time produced new alluvial flats in this otherwise dissected region. The oldest rock unit in the region is the Texco schist series of late Paleozoic (?) age. It was folded, metamorphosed, foliated, intruded by dikes, and strongly eroded before the next unit, the Texco Viejo green volcanic series of Late Triassic (?) age, was deposited. Another period of metamorphism and erosion followed before the calcareous clastic sediments of the Upper Jurassic (?) Acahuizotla formation were laid down. The next unit consists of the partly phyllitic calcareous shale of the Acuitlapan formation, which is of Neocenian (?) age and rests with at least disconformity on the Acahuizotla formation. The overlying Aptian-Barresian Kochicalco formation of thin-bedded limestone appears to grade upward from the Acuitlapan formation, locally, but it seems to be unconformable elsewhere. All these units have small outcrops in the area mapped and were not studied in detail. Warping and erosion occurred before the overlying Morelos formation began to accumulate in early Albian time. The basal member is anhydrite in the eastern part of the area mapped, but limestone and dolomite were deposited elsewhere. The formation consists largely of shallow-water calcareous bank deposits, with a maximum thickness of about 900 m. Deposition ceased in early Cenomanian time and further warpi

Open-File Report↗

U.S. Geological Survey science for the Wyoming Landscape Conservation Initiative—2014 annual report

This is the seventh report produced by the U.S. Geological Survey (USGS) for the Wyoming Landscape Conservation Initiative (WLCI) to detail annual activities conducted by the USGS for addressing specific management needs identified by WLCI partners. In FY2014, there were 26 projects, including a new one that was completed, two others that were also completed, and several that entered new phases or directions. The 26 projects fall into several categories: (1) synthesizing and analyzing existing data to identify current conditions on the landscape and using the data to develop models for projecting past and future landscape conditions; (2) monitoring indicators of ecosystem conditions and the effectiveness of on-the-ground habitat projects; (3) conducting research to elucidate the mechanisms underlying wildlife and habitat responses to changing land uses; (4) managing and making accessible the large number of databases, maps, and other products being developed; and (5) coordinating efforts among WLCI partners, helping them use USGS-developed decision-support tools, and integrating WLCI outcomes with future habitat enhancement and research projects. The new (completed) project was the development and publication of a public outreach piece for visitors of Fossil Butte National Monument. The final product was a USGS Fact Sheet that capitalized on previously collected elk-monitoring data to interpret the ecology of the Monument’s elk population and the importance of the Monument’s habitats to this highly visible wildlife species. One of the completed projects entailed developing and evaluating a synthetic approach to high-resolution satellite imagery for use in effectiveness monitoring, which culminated in a journal article. The other completed project was a coalescing of two similar tasks under data and information management that pertain to Web application development and the development of outreach and graphic products into a single integrated project that focuses on developing and maintaining/upgrading Web applications and other tools for visualizing, mapping, and using geospatial data. Major accomplishments for FY2014 included several publications, including Part B of an energy resources map that (with Part A) depicts coal, wind, oil, gas, oil shale, uranium, and solar energy production in the WLCI region. Two published works associated with sage-grouse included a Wildlife Monograph on prioritizing species’ habitats across large landscapes, multiple seasons, and novel areas (using sage-grouse in Wyoming as an example), and a USGS Data Series report that includes both the data used in the habitat-prioritization models and the habitat prioritization models developed for sage-grouse. Our Science Team also published a framework for conducting large, collaborative projects that rely on geospatial data, and a paper that describes the efficacy of fusing satellite data collected at various resolutions for measuring and monitoring vegetation changes. These products are all invaluable tools for maximizing the efficiency and effectiveness of managing species of concern, conducting future landscape-scale assessments, and monitoring status and trends of landscape conditions. Other highlights of FY2014 included a renewed effort to gather and analyze wildlife and habitat status and trend data for the WLCI Interagency Monitoring Database (IAMD) to assess long-term trends and cumulative effects associated with land-use and climate changes. Water-monitoring efforts included drilling four new groundwater-monitoring wells in the Green and New Fork River basins near the proposed Normally Pressured Lance Formation energy development, and continued data collection at established water-monitoring sites. Three additional wells were sampled as part of the Wyoming Groundwater Monitoring Network, bringing the total to 19 Network wells sampled in the WLCI region since 2010. Combined, these water-monitoring efforts can help to identify potential changes in water quality or levels that may result from land-use changes. Major terrestrial monitoring accomplishments included processing satellite imagery from 1985−2010 to develop a historical perspective of long-term vegetation changes, which can serve as a basis for monitoring current and future trends in sagebrush steppe. Such data are crucial tools for agencies tasked with sage-grouse management and conservation. The USGS WLCI Science Team also continued monitoring and testing methods for evaluating WLCI habitat treatments designed to promote aspen regeneration and enhance sage-grouse habitat, and to assess how those treatments influence invasive species distributions and ungulate herbivory. Highlights included analyzing field data collected to elucidate the relationships between sage-grouse habitat use and the proximity of energy infrastructure, and using new instruments to measure productivity responses of aspen woodlands to various factors. Numerous FY2014 accomplishments specifically addressed agency needs to manage and conserve Wyoming’s wildlife species of concern. A pygmy rabbit habitat model and Wyoming distribution map were completed to identify factors associated with rabbit habitat occupancy. Previous work on sage-grouse population dynamics was expanded to better understand the factors that drive long-term viability of sage-grouse populations and to develop a tool that helps to identify key factors limiting sage-grouse persistence in Wyoming. Field work and data analyses continued for elucidating the relationships between sagebrush songbird abundance and productivity, the intensity of energy development, and community dynamics of nest predators. For the mule deer study, mixed mountain shrublands important to migrating and wintering mule deer were mapped and delivered to WLCI partners. Additionally, the relationships between energy development and crucial winter habitat for mule deer were evaluated, and a new phase of work was implemented to better understand relationships between plant phenology and mule deer migration movements. Finally, initial analyses of data collected to evaluate fish-community composition in relation to habitat quality indicate that water quality, as measured by concentrations of hydrocarbons, water temperature, and others parameters, has been diminished in subwatersheds with higher levels of energy development. Overall, the outcomes and products of these wildlife studies contribute significantly to the information and tools needed for addressing effects of land-use changes on Wyoming’s species of concern. Finally, capabilities of the WLCI Web site and the USGS ScienceBase infrastructure were maintained and upgraded to help ensure access to and efficient use of all the WLCI data, products, assessment tools, and outreach materials that have been developed. Of particular note is the completion of three Web applications developed for mapping (1) the 1900−2008 progression of oil and gas development;(2) the predicted distributions of Wyoming’s Species of Greatest Conservation Need; and (3) the locations of coal and wind energy production, sage-grouse distribution and core management areas, and alternative routes for transmission lines within the WLCI region. Collectively, these applications tools provide WLCI planners and managers with powerful tools for better understanding the distributions of wildlife species and potential alternatives for energy development.

Wyoming↗

Central Colorado Assessment Project (CCAP)-Geochemical data for rock, sediment, soil, and concentrate sample media

This database was initiated, designed, and populated to collect and integrate geochemical data from central Colorado in order to facilitate geologic mapping, petrologic studies, mineral resource assessment, definition of geochemical baseline values and statistics, environmental impact assessment, and medical geology. The Microsoft Access database serves as a geochemical data warehouse in support of the Central Colorado Assessment Project (CCAP) and contains data tables describing historical and new quantitative and qualitative geochemical analyses determined by 70 analytical laboratory and field methods for 47,478 rock, sediment, soil, and heavy-mineral concentrate samples. Most samples were collected by U.S. Geological Survey (USGS) personnel and analyzed either in the analytical laboratories of the USGS or by contract with commercial analytical laboratories. These data represent analyses of samples collected as part of various USGS programs and projects. In addition, geochemical data from 7,470 sediment and soil samples collected and analyzed under the Atomic Energy Commission National Uranium Resource Evaluation (NURE) Hydrogeochemical and Stream Sediment Reconnaissance (HSSR) program (henceforth called NURE) have been included in this database. In addition to data from 2,377 samples collected and analyzed under CCAP, this dataset includes archived geochemical data originally entered into the in-house Rock Analysis Storage System (RASS) database (used by the USGS from the mid-1960s through the late 1980s) and the in-house PLUTO database (used by the USGS from the mid-1970s through the mid-1990s). All of these data are maintained in the Oracle-based National Geochemical Database (NGDB). Retrievals from the NGDB and from the NURE database were used to generate most of this dataset. In addition, USGS data that have been excluded previously from the NGDB because the data predate earliest USGS geochemical databases, or were once excluded for programmatic reasons, have been included in the CCAP Geochemical Database and are planned to be added to the NGDB.

Colorado↗

Critical metals in manganese nodules from the Cook Islands EEZ, abundances and distributions

The Cook Islands (CIs) Exclusive Economic Zone (EEZ) encompasses 1,977,000 km 2 and includes the Penrhyn and Samoa basins abyssal plains where manganese nodules flourish due to the availability of prolific nucleus material, slow sedimentation rates, and strong bottom currents. A group of CIs nodules was analyzed for mineralogical and chemical composition, which include many critical metals not before analyzed for CIs nodules. These nodules have varying sizes and nuclei material; however all are composed predominantly of δ-MnO 2 and X-ray amorphous iron oxyhydroxide. The mineralogy, Fe/Mn ratios, rare earth element contents, and slow growth rates (mean 1.9 mm/10 6 years) reflect formation primarily by hydrogenetic precipitation. The paucity of diagenetic input can be explained by low primary productivity at the surface and resultant low organic matter content in seafloor sediment, producing oxic seafloor and sub-seafloor environments. The nodules contain high mean contents of Co (0.41%), Ni (0.38%), Ti (1.20%), and total rare earth elements plus yttrium (REY; 0.167%), and also high contents of Mo, Nb, V, W, and Zr. Compiled data from a series of four cruises by the Japan International Cooperation Agency and the Mining agency of Japan from 1985 to 2000 were used to generate a map that defines the statistical distribution of nodule abundance throughout the EEZ, except the Manihiki Plateau. The abundance distribution map shows a belt of high nodule abundance (19–45 kg/m 2 ) that starts in the southeast corner of the EEZ, runs northwest, and also bifurcates into a SW trending branch. Small, isolated areas contain abundances of nodules of up to 58 kg/m 2 . Six ~ 20,000 km 2 areas of particularly high abundance were chosen to represent potential exploration areas, and maps for metal concentration were generated to visualize metal distribution and to extrapolate estimated metal tonnages within the six sites and the EEZ as a whole. Grades for Mn, Cu, and Ni are low in CIs nodules in areas of high abundance; however, Ti, Co, and REY show high contents where nodule abundances are high. Of the six areas identified to represent a range of metal contents, one at the northern end of the N-S abundance main belt optimizes the most metals and would yield the highest dry metric tons for Mn (61,002,292), Ni (1,247,834), Mo (186,166), V (356,247), W (30,215), and Zr (195,323). When compared with the Clarion–Clipperton Zone, the CIs nodules show higher nodule abundances (> 25 kg/m 2 over ~ 123,844 km 2 ), and are more enriched in the green-tech, high-tech, and energy metals Co, Ti, Te, Nb, REY, Pt, and Zr. The CIs EEZ shows a significant resource potential for these critical metals due to their high prices, high demand, and the high nodule abundance, which will allow for a smaller footprint for a 20-year mine site and therefore smaller environmental impact.

Ore Geology Reviews↗

Alaska Geochemical Database, Version 2.0 (AGDB2)–Including “best value” data compilations for rock, sediment, soil, mineral, and concentrate sample mediaI

The Alaska Geochemical Database Version 2.0 (AGDB2) contains new geochemical data compilations in which each geologic material sample has one “best value” determination for each analyzed species, greatly improving speed and efficiency of use. Like the Alaska Geochemical Database (AGDB, http://pubs.usgs.gov/ds/637/) before it, the AGDB2 was created and designed to compile and integrate geochemical data from Alaska in order to facilitate geologic mapping, petrologic studies, mineral resource assessments, definition of geochemical baseline values and statistics, environmental impact assessments, and studies in medical geology. This relational database, created from the Alaska Geochemical Database (AGDB) that was released in 2011, serves as a data archive in support of present and future Alaskan geologic and geochemical projects, and contains data tables in several different formats describing historical and new quantitative and qualitative geochemical analyses. The analytical results were determined by 85 laboratory and field analytical methods on 264,095 rock, sediment, soil, mineral and heavy-mineral concentrate samples. Most samples were collected by U.S. Geological Survey personnel and analyzed in U.S. Geological Survey laboratories or, under contracts, in commercial analytical laboratories. These data represent analyses of samples collected as part of various U.S. Geological Survey programs and projects from 1962 through 2009. In addition, mineralogical data from 18,138 nonmagnetic heavy-mineral concentrate samples are included in this database. The AGDB2 includes historical geochemical data originally archived in the U.S. Geological Survey Rock Analysis Storage System (RASS) database, used from the mid-1960s through the late 1980s and the U.S. Geological Survey PLUTO database used from the mid-1970s through the mid-1990s. All of these data are currently maintained in the National Geochemical Database (NGDB). Retrievals from the NGDB were used to generate most of the AGDB data set. These data were checked for accuracy regarding sample location, sample media type, and analytical methods used. This arduous process of reviewing, verifying and, where necessary, editing all U.S. Geological Survey geochemical data resulted in a significantly improved Alaska geochemical dataset. USGS data that were not previously in the NGDB because the data predate the earliest U.S. Geological Survey geochemical databases, or were once excluded for programmatic reasons, are included here in the AGDB2 and will be added to the NGDB. The AGDB2 data provided here are the most accurate and complete to date, and should be useful for a wide variety of geochemical studies. The AGDB2 data provided in the linked database may be updated or changed periodically.

Alaska↗

Geologic Cross Section E-E' through the Appalachian Basin from the Findlay Arch, Wood County, Ohio, to the Valley and Ridge Province, Pendleton County, West Virginia

Geologic cross section E-E' is the first in a series of cross sections planned by the U.S. Geological Survey (USGS) to document and improve understanding of the geologic framework and petroleum systems of the Appalachian basin. Cross section E-E' provides a regional view of the structural and stratigraphic framework of the basin from the Findlay arch in northwestern Ohio to the Valley and Ridge province in eastern West Virginia, a distance of approximately 380 miles (mi) (fig. 1, on sheet 1). Cross section E-E' updates earlier geologic cross sections through the central Appalachian basin by Renfro and Feray (1970), Bennison (1978), and Bally and Snelson (1980) and a stratigraphic cross section by Colton (1970). Although other published cross sections through parts of the basin show more structural detail (for example, Shumaker, 1985; Kulander and Dean, 1986) and stratigraphic detail (for example, Ryder, 1992; de Witt and others, 1993; Hettinger, 2001), these other cross sections are of more limited extent geographically and stratigraphically. Although specific petroleum systems in the Appalachian basin are not identified on the cross section, many of their key elements (such as source rocks, reservoir rocks, seals, and traps) can be inferred from lithologic units, unconformities, and geologic structures shown on the cross section. Other aspects of petroleum systems (such as the timing of petroleum generation and preferred migration pathways) may be evaluated by burial history, thermal history, and fluid flow models based on information shown on the cross section. Cross section E-E' lacks the detail to illustrate key elements of coal systems (such as paleoclimate, coal quality, and coal rank), but it does provide a general framework (stratigraphic units and general rock types) for the coal-bearing section. Also, cross section E-E' may be used as a reconnaissance tool to identify plausible geologic structures and strata for the subsurface storage of liquid waste (for example, Colton, 1961; Lloyd and Reid, 1990) or for the sequestration of carbon dioxide (for example, Smith and others, 2002; Lucier and others, 2006).

Scientific Investigations Map↗

Spatial mapping and attribution of Wyoming wind turbines

This Wyoming wind-turbine data set represents locations of wind turbines found within Wyoming as of August 1, 2009. Each wind turbine is assigned to a wind farm. For each turbine, this report contains information about the following: potential megawatt output, rotor diameter, hub height, rotor height, land ownership, county, wind farm power capacity, the number of units currently associated with its wind farm, the wind turbine manufacturer and model, the wind farm developer, the owner of the wind farm, the current purchaser of power from the wind farm, the year the wind farm went online, and the status of its operation. Some attributes are estimates based on information that was obtained through the American Wind Energy Association and miscellaneous online reports. The locations are derived from August 2009 true-color aerial photographs made by the National Agriculture Imagery Program; the photographs have a positional accuracy of approximately ?5 meters. The location of wind turbines under construction during the development of this data set will likely be less accurate than the location of turbines already completed. The original purpose for developing the data presented here was to evaluate the effect of wind energy development on seasonal habitat used by greater sage-grouse. Additionally, these data will provide a planning tool for the Wyoming Landscape Conservation Initiative Science Team and for other wildlife- and habitat-related projects underway at the U.S. Geological Survey's Fort Collins Science Center. Specifically, these data will be used to quantify disturbance of the landscape related to wind energy as well as quantifying indirect disturbances to flora and fauna. This data set was developed for the 2010 project 'Seasonal predictive habitat models for greater sage-grouse in Wyoming.' This project's spatially explicit seasonal distribution models of sage-grouse in Wyoming will provide resource managers with tools for conservation planning. These specific data are being used for assessing the effect of disturbance resulting from wind energy development within Wyoming on sage-grouse populations.

Data Series↗

Geologic map of the Mount Blue Sky (formerly Mount Evans) quadrangle, Clear Creek and Park Counties, Colorado

The Mount Blue Sky (formerly Mount Evans) 7.5’ quadrangle lies in Park and Clear Creek counties, Colorado, about 60 km west of Denver. The highest elevation in the quadrangle is 14,265 ft (4,348 m) at the top of Mount Blue Sky. The lowest is at about 9,200 ft (2,804 m) on Guanella Pass Road at the southern edge of the quadrangle. Bedrock directly underlies most of the map area, with surficial deposits primarily in the valleys. The geology of the quadrangle was previously mapped at 1:100,000 scale as part of a regional compilation by Kellogg and others (2008). The oldest rocks in the Mount Blue Sky 7.5-minute quadrangle are Paleoproterozoic metasedimentary rocks, and mafic to felsic metaigneous rocks (all units starting with ‘X’ on Plate 1). These rocks were metamorphosed under upper amphibolite facies conditions and intruded by Mesoproterozoic felsic igneous rocks of the ~1442 Ma Mount Blue Sky (YgR, Yt, Ygdm, Ymgm and ~1424 Ma Silver Plume (Yg) batholiths (Spurr and others, 1908; Tweto, 1897; Aleinikoff and others, 1993; du Bray and others, 2018) and, in the southern part of the quadrangle, by rocks that may also be part of the Mount Blue Sky batholith, but may alternatively interpreted as part of the ~1115 Ma to ~1066 Ma Pikes Peak batholith (Unruh and others, 1995; Guitreau and others, 2016). Four generations of folds affected the area. The oldest, F1 folds are isoclinal of various orientations, but primarily northerly-plunging in the southern part of the quadrangle (Mahatma, 2019; Mahatma and others, 2022). In the northern part of the quadrangle (Powell, 2020), open to close F2 chevron folds exist with various orientations. F3 folds in the northern part of the quadrangle are open to close with upright axial planes and plunges to the north and south, and in the southern part of the quadrangle they are open centimeter- to meter- scale northerly-plunging folds, possibly overprinted by another generation of northerly-plunging folds based on orientations of axial planes (F2 and F3 of Mahatma and others, 2022). F4 folds throughout the quadrangle are open to gentle with upright axial planes and shallow plunges to the east and west. The Mount Blue Sky batholith displays a pervasive moderately NW-dipping biotite-hornblende foliation (Fig. 1) in addition to a flow foliation near the margins, indicating NW-directed shortening after ~1442 Ma (Powell, 2020). The relationship between this foliation and the folds is not clear. Various joint sets are present in the area. The most pervasive joint set strikes 355°-020° and is subvertical. It is best developed in the western to southwestern part of the map area, and may be related to late Cenozoic extension associated with the Rio Grande Rift. Joint orientations are generally consistent with the trends of topographical lineaments. Surficial deposits include two series of glacial till deposits (Qtb and Qtp), and outwash (Qgp) deposits. They correlate with the Bull Lake (170-120 ka) and Pinedale (30-12 ka) glacial periods (Dahms, 2004) based on original depositional morphology, geomorphic and topographic position, deposit weathering and pedogenic properties. Possible older glacial deposits (Qti) have been observed along topographically higher surfaces.

Colorado↗

Comparison of Water Years 2004-05 and Historical Water-Quality Data, Upper Gunnison River Basin, Colorado

Population growth and changes in land use have the potential to affect water quality and quantity in the upper Gunnison River Basin. In 1995, the U.S. Geological Survey (USGS), in cooperation with the Bureau of Land Management, City of Gunnison, Colorado River Water Conservation District, Crested Butte South Metropolitan District, Gunnison County, Hinsdale County, Mount Crested Butte Water and Sanitation District, National Park Service, Town of Crested Butte, Upper Gunnison River Water Conservancy District, and Western State College, established a water-quality monitoring program in the upper Gunnison River Basin to characterize current water-quality conditions and to assess the effects of increased urban development and other land-use changes on water quality. The monitoring network has evolved into two groups of stations - stations that are considered long term and stations that are considered rotational. The long-term stations are monitored to assist in defining temporal changes in water quality (how conditions may change over time). The rotational stations are monitored to assist in the spatial definition of water-quality conditions (how conditions differ throughout the basin) and to address local and short-term concerns. Some stations in the rotational group were changed beginning in water year 2007. Annual summaries of the water-quality data from the monitoring network provide a point of reference for discussions regarding water-quality monitoring in the upper Gunnison River Basin. This summary includes data collected during water years 2004 and 2005. The introduction provides a map of the sampling sites, definitions of terms, and a one-page summary of selected water-quality conditions at the network stations. The remainder of the summary is organized around the data collected at individual stations. Data collected during water years 2004 and 2005 are compared to historical data, State water-quality standards, and Federal water-quality guidelines. Data were collected following USGS protocols.

Data Series↗

Baseline coastal oblique aerial photographs collected from Pensacola, Florida, to Breton Islands, Louisiana, February 7, 2012

The U.S. Geological Survey (USGS) conducts baseline and storm response photography missions to document and understand the changes in vulnerability of the Nation's coasts to extreme storms (Morgan, 2009). On February 7, 2012, the USGS conducted an oblique aerial photographic survey from Pensacola, Fla., to Breton Islands, La., aboard a Piper Navajo Chieftain at an altitude of 500 feet (ft) and approximately 1,000 ft offshore. This mission was flown to collect baseline data for assessing incremental changes since the last survey, and the data can be used in the assessment of future coastal change. The photographs provided here are Joint Photographic Experts Group (JPEG) images. The photograph locations are an estimate of the position of the aircraft and do not indicate the location of the feature in the images (see the Navigation Data page). These photos document the configuration of the barrier islands and other coastal features at the time of the survey. The header of each photo is populated with time of collection, Global Positioning System (GPS) latitude, GPS longitude, GPS position (latitude and longitude), keywords, credit, artist (photographer), caption, copyright, and contact information using EXIFtools (Subino and others, 2012). Photographs can be opened directly with any JPEG-compatible image viewer by clicking on a thumbnail on the contact sheet. Table 1 provides detailed information about the assigned location, name, data, and time the photograph was taken along with links to the photograph. In addition to the photographs, a Google Earth Keyhole Markup Language (KML) file is provided and can be used to view the images by clicking on the marker and then clicking on either the thumbnail or the link above the thumbnail. The KML files were created using the photographic navigation files (see the Photos and Maps page).

Alabama, Florida, Louisiana, Mississippi↗

Baseline coastal oblique aerial photographs collected from the Virginia/North Carolina border to Montauk Point, New York, October 5-6, 2014

Summary The U.S. Geological Survey (USGS) conducts baseline and storm response photography missions to document and understand the changes in vulnerability of the Nation's coasts to extreme storms (Morgan, 2009). On October 5-6, 2014, the USGS conducted an oblique aerial photographic survey from the Virginia/North Carolina border to Montauk Point, New York, aboard a Cessna 182 at an altitude of 500 feet (ft) and approximately 1,200 ft offshore. This mission was flown to collect baseline data to assess incremental changes since the last survey, flown in November 2012, and the data can be used in the assessment of future coastal change. The images provided in this report are Joint Photographic Experts Group (JPEG) images. ExifTool was used to add the following to the header of each photo: time of collection, Global Positioning System (GPS) latitude, GPS longitude, keywords, credit, artist (photographer), caption, copyright, and contact information. The photograph locations are an estimate of the position of the aircraft and do not indicate the location of any feature in the images (see the Navigation Data page). These photographs document the state of the barrier islands and other coastal features at the time of the survey. Pages containing thumbnail images of the photographs, referred to as contact sheets, were created in five-minute segments of flight time. These segments can be found on the Photos and Maps page. Photographs can be opened directly with any JPEG-compatible image viewer by clicking on a thumbnail on the contact sheet. In addition to the photographs, a Google Earth Keyhole Markup Language (KML) file is provided and can be used to view the images by clicking on the marker and then clicking on either the thumbnail or the link above the thumbnail. The KML files were created using the photographic navigation files.

New York, North Carolina, Virginia↗

Linkage of the Soil and Water Assessment Tool and the Texas Water Availability Model to simulate the effects of brush management on monthly storage of Canyon Lake, south-central Texas, 1995-2010

The U.S. Geological Survey (USGS), in cooperation with the Texas State Soil and Water Conservation Board, developed and applied an approach to create a linkage between the published upper Guadalupe River Soil Water Assessment Tool (SWAT) brush-management (ashe juniper [ Juniperus ashei ]) model and the full authorization version Guadalupe River Water Availability Model (WAM). The SWAT model was published by the USGS, and the Guadalupe River WAM is available from the Texas Commission on Environmental Quality. The upper Guadalupe River watershed is a substantial component of the Guadalupe River WAM. This report serves in part as documentation of a proof of concept on the feasibility of linking these two water-resources planning models for the purpose of simulating possible increases in water storage in Canyon Lake as a result of different brush-management scenarios. The SWAT-WAM linkage for the upper Guadalupe River is documented with a principal objective to evaluate the distributional characteristics of the monthly water storage of Canyon Lake during selected drought conditions. Focus is on the relative evaluation of select scenarios of large-scale or “extensive” brush management within the upper Guadalupe River watershed. There are six SWAT simulations for the upper Guadalupe River watershed that include a baseline (0-percent management of treatable ashe juniper, the baseline scenario from a previous study in which no percentage of ashe juniper is numerically replaced with grassland) along with five scenarios (extensions of SWAT simulations from a previous study) of 20-, 40-, 60-, 80-, and 100-percent random (numerical) replacement of treatable ashe juniper with grasslands throughout the upper Guadalupe River watershed in south-central Texas. SWAT is a process-based, semidistributed, water-balance model designed to predict the effects of landscape management decisions on water yields. A watershed is subdivided into subbasins, and each subbasin is associated with a single reach on the stream network. In general a WAM, such as the Guadalupe River WAM, provides analysis of generalized water rights in a river and reservoir framework. A WAM accommodates hydrology and water usage through several input files containing water rights, watershed parameters, and naturalized streamflow time series. A WAM is generalized for application to rivers and reservoir systems, and input datasets are uniquely developed for a river basin of concern. The extractions of SWAT output for the five extensive brush-management and baseline scenarios were offset by –21 years and, in general, the results were then mapped to the WAM input-flow file. The offset of –21 years was chosen arbitrarily for technical reasons and means that the period of monthly record 1995–2010 of the upper Guadalupe River SWAT became the synthetic period of monthly record 1974–89, hereinafter 1974–89 (synthetic) period, of the Guadalupe River WAM. The relative (between scenario to baseline) effects of extensive brush-management scenarios by using the SWAT-WAM linkage were evaluated, and two critical intermediate results were total inflow to Canyon Lake from 1995 to 2010 and the monthly storage of Canyon Lake from 1974 to 1989 (synthetic). The first quartile or lower 25th percentile of monthly storage of Canyon Lake for the baseline scenario is 381,000 acre-feet (acre-ft) for the hereinafter 1974–89 (synthetic) period. This lower quartile was chosen for analysis for two critical purposes. First, Canyon Lake is managed with a conservation pool of about 386,200 acre-ft capacity (as recognized by the WAM) and is at or near conservation capacity about 50 percent or more of the time; further, there is intrinsic data censoring that occurs for the monthly storage distribution because Canyon Lake is at or near conservation pool elevation the majority of the time. This intrinsic censoring has the effect of creating a bounded distribution with a left or low-volume tail. Statistical assessment of the brush-management scenarios beginning with the 381,000 acre-ft censoring threshold provides readily interpretable results. Second, the quantification of brush management during periods lacking abundant rainfall, which were defined in this study as months for which Canyon Lake storage was below the 25th percentile for the simulation period, are of substantial interest to water-resource managers and stakeholders in the context of water-supply enhancement. A statistical assessment of the SWAT-WAM linkage for the low-volume tail of the distribution of monthly storage of Canyon Lake is the focus of analysis and interpretation. Drought periods for the analysis are defined as the months (consecutive or not) during which Canyon Lake is below the 25th percentile of storage (381,000 acre-ft) for the baseline scenario. Such months are referred to as being within the “Drought Quartile.” The Drought Quartile is a conceptual and heuristically determined waypoint for the analysis and is not related to any administrative definition of drought by stakeholders or policy makers. The five scenarios and the baseline scenario simulated in the upper Guadalupe River SWAT were all passed through the Guadalupe River WAM by the SWAT-WAM linkage described in this report. A comparison of the mean increase per month in reservoir storage for Canyon Lake conditioned for the Drought Quartile was made. For each of the five brush-management and baseline scenarios, the months with storage below 381,000 acre-ft were extracted. The mean monthly storages during the Drought Quartile were computed for each of the five scenarios and the baseline scenario. The mean of the baseline scenario was 376,458 acre-ft and subsequently was subtracted from the mean monthly storage during the Drought Quartile for each of the five scenarios. The mean monthly offset storages of Canyon Lake during the Drought Quartile were 110 acre-ft (20 percent); 448 acre-ft (40 percent); 754 acre-ft (60 percent); 1,080 acre-ft (80 percent); and 1,090 acre-ft (100 percent). A particular mean was interpreted as follows: the value of 754 acre-ft for the 60-percent brush-management scenario implies that, on average, this scenario indicates an additional 754 acre-ft per month of storage in Canyon Lake relative to the baseline during the Drought Quartile. All of the five scenarios resulted in an increase on average to water supply relative to the baseline scenario during the Drought Quartile through the SWAT-WAM linkage.

Texas↗

ATM Coastal Topography-Alabama 2001

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) topography were produced collaboratively by the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Alabama coastline, acquired October 3-4, 2001. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative scanning Lidar instrument originally developed by NASA, and known as the Airborne Topographic Mapper (ATM), was used during data acquisition. The ATM system is a scanning Lidar system that measures high-resolution topography of the land surface, and incorporates a green-wavelength laser operating at pulse rates of 2 to 10 kilohertz. Measurements from the laser ranging device are coupled with data acquired from inertial navigation system (INS) attitude sensors and differentially corrected global positioning system (GPS) receivers to measure topography of the surface at accuracies of +/-15 centimeters. The nominal ATM platform is a Twin Otter or P-3 Orion aircraft, but the instrument may be deployed on a range of light aircraft. Elevation measurements were collected over the survey area using the ATM system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for pre-survey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used to create maps that represent submerged or first surface topography.

Alabama↗

ATM Coastal Topography-Florida 2001: Eastern Panhandle

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) topography were produced collaboratively by the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the eastern Florida panhandle coastline, acquired October 2, 2001. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative scanning Lidar instrument originally developed by NASA, and known as the Airborne Topographic Mapper (ATM), was used during data acquisition. The ATM system is a scanning Lidar system that measures high-resolution topography of the land surface and incorporates a green-wavelength laser operating at pulse rates of 2 to 10 kilohertz. Measurements from the laser-ranging device are coupled with data acquired from inertial navigation system (INS) attitude sensors and differentially corrected global positioning system (GPS) receivers to measure topography of the surface at accuracies of +/-15 centimeters. The nominal ATM platform is a Twin Otter or P-3 Orion aircraft, but the instrument may be deployed on a range of light aircraft. Elevation measurements were collected over the survey area using the ATM system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used to create maps that represent submerged or first surface topography.

Florida↗

Estimated Perennial Streams of Idaho and Related Geospatial Datasets

The perennial or intermittent status of a stream has bearing on many regulatory requirements. Because of changing technologies over time, cartographic representation of perennial/intermittent status of streams on U.S. Geological Survey (USGS) topographic maps is not always accurate and (or) consistent from one map sheet to another. Idaho Administrative Code defines an intermittent stream as one having a 7-day, 2-year low flow (7Q2) less than 0.1 cubic feet per second. To establish consistency with the Idaho Administrative Code, the USGS developed regional regression equations for Idaho streams for several low-flow statistics, including 7Q2. Using these regression equations, the 7Q2 streamflow may be estimated for naturally flowing streams anywhere in Idaho to help determine perennial/intermittent status of streams. Using these equations in conjunction with a Geographic Information System (GIS) technique known as weighted flow accumulation allows for an automated and continuous estimation of 7Q2 streamflow at all points along a stream, which in turn can be used to determine if a stream is intermittent or perennial according to the Idaho Administrative Code operational definition. The selected regression equations were applied to create continuous grids of 7Q2 estimates for the eight low-flow regression regions of Idaho. By applying the 0.1 ft3/s criterion, the perennial streams have been estimated in each low-flow region. Uncertainty in the estimates is shown by identifying a 'transitional' zone, corresponding to flow estimates of 0.1 ft3/s plus and minus one standard error. Considerable additional uncertainty exists in the model of perennial streams presented in this report. The regression models provide overall estimates based on general trends within each regression region. These models do not include local factors such as a large spring or a losing reach that may greatly affect flows at any given point. Site-specific flow data, assuming a sufficient period of record, generally would be considered to represent flow conditions better at a given site than flow estimates based on regionalized regression models. The geospatial datasets of modeled perennial streams are considered a first-cut estimate, and should not be construed to override site-specific flow data.

Data Series↗

Modeling habitat distribution from organism occurrences and environmental data: Case study using anemonefishes and their sea anemone hosts

We demonstrate the KGSMapper (Kansas Geological Survey Mapper), a straightforward, web-based biogeographic tool that uses environmental conditions of places where members of a taxon are known to occur to find other places containing suitable habitat for them. Using occurrence data for anemonefishes or their host sea anemones, and data for environmental parameters, we generated maps of suitable habitat for the organisms. The fact that the fishes are obligate symbionts of the anemones allowed us to validate the KGSMapper output: we were able to compare the inferred occurrence of the organism to that of the actual occurrence of its symbiont. Characterizing suitable habitat for these organisms in the Indo-West Pacific, the region where they naturally occur, can be used to guide conservation efforts, field work, etc.; defining suitable habitat for them in the Atlantic and eastern Pacific is relevant to identifying areas vulnerable to biological invasions. We advocate distinguishing between these 2 sorts of model output, terming the former maps of realized habitat and the latter maps of potential habitat. Creation of a niche model requires adding biotic data to the environmental data used for habitat maps: we included data on fish occurrences to infer anemone distribution and vice versa. Altering the selection of environmental variables allowed us to investigate which variables may exert the most influence on organism distribution. Adding variables does not necessarily improve precision of the model output. KGSMapper output distinguishes areas that fall within 1 standard deviation (SD) of the mean environmental variable values for places where members of the taxon occur, within 2 SD, and within the entire range of values; eliminating outliers or data known to be imprecise or inaccurate improved output precision mainly in the 2 SD range and beyond. Thus, KGSMapper is robust in the face of questionable data, offering the user a way to recognize and clean such data. It also functions well with sparse datasets. These features make it useful for biogeographic meta-analyses with the diverse, distributed datasets that are typical for marine organisms lacking direct commercial value. ?? Inter-Research 2006.

Marine Ecology Progress Series↗

ATM coastal topography-Florida 2001: Western Panhandle

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) topography were produced collaboratively by the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the western Florida panhandle coastline, acquired October 2-4 and 7-10, 2001. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative scanning Lidar instrument originally developed by NASA, and known as the Airborne Topographic Mapper (ATM), was used during data acquisition. The ATM system is a scanning Lidar system that measures high-resolution topography of the land surface and incorporates a green-wavelength laser operating at pulse rates of 2 to 10 kilohertz. Measurements from the laser-ranging device are coupled with data acquired from inertial navigation system (INS) attitude sensors and differentially corrected global positioning system (GPS) receivers to measure topography of the surface at accuracies of +/-15 centimeters. The nominal ATM platform is a Twin Otter or P-3 Orion aircraft, but the instrument may be deployed on a range of light aircraft. Elevation measurements were collected over the survey area using the ATM system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used to create maps that represent submerged or first surface topography.

Florida↗

ATM Coastal Topography-Mississippi, 2001

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography were produced collaboratively by the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Mississippi coastline, from Lakeshore to Petit Bois Island, acquired September 9-10, 2001. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative scanning lidar instrument originally developed by NASA, and known as the Airborne Topographic Mapper (ATM), was used during data acquisition. The ATM system is a scanning lidar system that measures high-resolution topography of the land surface and incorporates a green-wavelength laser operating at pulse rates of 2 to 10 kilohertz. Measurements from the laser-ranging device are coupled with data acquired from inertial navigation system (INS) attitude sensors and differentially corrected global positioning system (GPS) receivers to measure topography of the surface at accuracies of +/-15 centimeters. The nominal ATM platform is a Twin Otter or P-3 Orion aircraft, but the instrument may be deployed on a range of light aircraft. Elevation measurements were collected over the survey area using the ATM system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first-surface topography.

Mississippi↗