SEARCH · Geology Reports

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71Linked to original sources

USGS2015

Stratigraphic reconnaissance of the Middle Jurassic Red Glacier Formation, Tuxedni Group, at Red Glacier, Cook Inlet, Alaska

The Alaska Division of Geological & Geophysical Surveys (DGGS) and U.S. Geological Survey (USGS) are implementing ongoing programs to characterize the petroleum potential of Cook Inlet basin. Since 2009 this program has included work on the Mesozoic stratigraphy of lower Cook Inlet, including the Middle Jurassic Tuxedni Group between Tuxedni and Iniskin bays (LePain and others, 2013; Stanley and others, 2013; fig. 5-1). The basal unit in the group, the Red Glacier Formation (fig. 5-2), is thought to be the principal source rock for oil produced in upper Cook Inlet, and available geochemical data support this contention (Magoon and Anders, 1992; Magoon, 1994). Despite its economic significance very little has been published on the formation since Detterman and Hartsock’s (1966) seminal contribution on the geology of the Iniskin–Tuxedni area nearly 50 years ago. Consequently its stratigraphy, contact relations with bounding formations, and source rock characteristics are poorly known. During the 2014 field season, a nearly continuous stratigraphic section through the Red Glacier Formation in its type area at Red Glacier was located and measured to characterize sedimentary facies and to collect a suite of samples for analyses of biostratigraphy, Rock-Eval pyrolysis, vitrinite reflectance, and sandstone composition (fig. 5-3). The poorly known nature of the Red Glacier Formation is likely due to its remote location, steep terrain, and the fact that the type section is split into two segments that are more than 3 km apart. The lower 375 m segment of the formation is on the ridge between Red Glacier and Lateral Glacier and the upper 1,009 m segment is on the ridge between Red Glacier and Boulder Creek (fig. 5-3). Structural complications in the area add to the difficulty in understanding how these two segments fit together.

Alaska↗

USGS2001

Debris-flow generation from recently burned watersheds

Evaluation of the erosional response of 95 recently burned drainage basins in Colorado, New Mexico and southern California to storm rainfall provides information on the conditions that result in fire-related debris flows. Debris flows were produced from only 37 of 95 (~40 percent) basins examined; the remaining basins produced either sediment-laden streamflow or no discernable response. Debris flows were thus not the prevalent response of the burned basins. The debris flows that did occur were most frequently the initial response to significant rainfall events. Although some hillslopes continued to erode and supply material to channels in response to subsequent rainfall events, debris flows were produced from only one burned basin following the initial erosive event. Within individual basins, debris flows initiated through both runoff and infiltration-triggered processes. The fact that not all burned basins produced debris flows suggests that specific geologic and geomorphic conditions may control the generation of fire-related debris flows. The factors that best distinguish between debris-flow producing drainages and those that produced sediment-laden streamflow are drainage-basin morphology and lithology, and the presence or absence of water-repellent soils. Basins underlain by sedimentary rocks were most likely to produce debris flows that contain large material, and sand- and gravel-dominated flows were generated primarily from terrain underlain by decomposed granite. Basin-area and relief thresholds define the morphologic conditions under which both types of debris flows occur. Debris flows containing large material are more likely to be produced from basins without water-repellent soils than from basins with water repellency. The occurrence of sand-and gravel-dominated debris flows depends on the presence of water-repellent soils.

California↗

USGS1986

Aeromagnetic map of the Holy Cross Wilderness Area, Eagle, Lake, and Pitkin counties, Colorado

The Holy Cross Wilderness (02–170), called simply "the wilderness area" in this report, lies in the northern Sawatch Range of Colorado. Regionally, the wilderness area lies on a strong gravity gradient that marks the northwest side of the deepest gravity low in the central United States (Behrendt and Bajwa, 1974). This low (fig. 1) reflects a series of Laramide and younger granitic intrusive bodies which are probably related genetically to the Colorado mineral belt (Tweto and Sims, 1963; Behrendt and others, 1968). The wilderness area lies on a structural dome, on which Proterozoic basement rocks have been uplifted, exhumed, and sculpted by glacial and fluvial erosional processes into spectacular alpine ridges. Steep faults bound the western edge of the dome; west of these domal border faults lies a sequence of Paleozoic sedimentary strata, which dip gently and thicken to the west. The dome is marked by an oval regional gravity high (Webring, written commun., 1985) whose shape suggests that maximum domal uplift may have occurred along or just to the east of the domal border fault complex. For more extensive descriptions of the regional geologic setting and mineral deposits of central Colorado, see Tweto (1968). Map B is a generalized bedrock geologic map of the wilderness area, showing locations of faults, shear zones, and geologic units referred to in this report. Many smaller outcrops are not shown on Map B, however. For precise locations, descriptions of geologic units, and a more complete discussion of the geology of the wilderness area, see the companion map by Wallace and others (1986).

Colorado↗

USGS1962

Magnesite and brucite in the United States, exclusive of Alaska and Hawaii

The important deposits of magnesite (MgCO 3 ) and brucite (MgO.H 2 O) in the United States (exclusive of Alaska and Hawaii) are shown on the accompanying map. Single deposits and groups of deposits are shown by geometric symbols according to four size categories based on estimated production plus reserves. These categories are: less than 10,000 tons, 10,000 to 100,000 tons, 100,000 to 1,000,000 tons, and more than 1,000,000 tons. Occurrences of mineralogic interest only are not shown. All map locations are numbered consecutively in each State and keyed to the locality index. The geographical coordinates in the locality index represent the centers of the geometric symbols. Thus, the same coordinates are assigned to all deposits covered by a group symbol. The map was compiled from published reports and data in the files of the United States Geological Survey. The names, geographic coordinates, and geologic types of deposits are given in the locality index. The principal published reports used in compiling the map are listed in the selected references. The main types of commercial deposits of magnesite in the United States are: (1) replacement bodies in limestone and dolomite; (2) replacements and veins in serpentine; and (3) sedimentary beds. Other magnesite deposits of varied origin and less common occurrence include beds associated with talc, chlorite, and mica schists; and veins and lenses in altered tuffs. Brucite is a relatively rare mineral of secondary origin which usually accompanies other magnesian minerals, particularly magnesite and hydromagnesite, and is associated with carbonate rocks and serpentine. Magnesite was first mined in California in 1886, and the State was the only domestic producer until the development of the Washington deposits began in 1916. In recent years, the main production of magnesite has been from Stevens County, Washington, and Nye County, Nevada. Production in California has been intermittent since 1945. Magnesite deposits in Texas were mined during and immediately after World War II. At present (1961) the only brucite deposits being worked are those at Gabbs, Nye County, Nevada. They have been mined almost continuously since 1935.

Mineral Investigations Resource Map↗

USGS2016

A spatially explicit suspended-sediment load model for western Oregon

We calibrated the watershed model SPARROW (Spatially Referenced Regressions on Watershed attributes) to give estimates of suspended-sediment loads for western Oregon and parts of northwestern California. Estimates of suspended-sediment loads were derived from a nonlinear least squares regression that related explanatory variables representing landscape and transport conditions to measured suspended-sediment loads at 68 measurement stations. The model gives estimates of model coefficients and their uncertainty within a spatial framework defined by the National Hydrography Dataset Plus hydrologic network. The resulting model explained 64 percent of the variability in suspended-sediment yield and had a root mean squared error value of 0.737. The predictor variables selected for the final model were (1) generalized lithologic province, (2) mean annual precipitation, and (3) burned area (by recent wildfire). Other landscape characteristics also were considered, but they were not significant predictors of sediment transport, were strongly correlated with another predictor variable, or were not as significant as the predictors selected for the final model. The northern Oregon coastal drainages had the highest predicted suspended sediment yields (median yield 475 kilograms per hectare per year) and the Klamath River Basin had the lowest (median yield 53 kilograms per hectare per year). Quaternary deposits were, on average, the largest contributor to incremental suspended-sediment yield even though this lithologic province only makes up 17 percent of the modeling domain. Coast Range sedimentary rocks and Coast Range volcanic rocks had high suspended-sediment yields whereas, in addition to the Klamath terrane, the Western Cascade and High Cascade lithologic provinces had low suspended-sediment yields. Precipitation and the area affected by recent wildfire both positively correlated with suspended-sediment load. Suspended-sediment transport rates predicted by this SPARROW model are less than historical (1956–73) and long‑term (thousands of years) geological rates. This difference likely results, in part, from biases in the data underlying the SPARROW model, probably resulting in predicted suspended-sediment estimates that underestimate actual transport rates. However, the differences also likely owe to natural and human-caused variation in suspended-sediment yields as they respond to changes in climate, vegetation, fire frequency, and land use. In particular, decreases in mean annual suspended-sediment yields within the Umpqua River Basin since 1956–73 may owe to less intense forest harvest, passage of the Oregon Forest Practices Act of 1971, and increased emphasis in habitat protection in recent decades. Such sensitivity may have implications for the spatial and temporal distributions of aquatic and riparian habitats. Knowledge of the regionally important patterns and factors in suspended-sediment sources and transport could support broad-scale, water-quality management objectives and priorities. Because of biases and limitations of this model, however, these results are most applicable for general comparisons and for broad areas such as large watersheds. For example, despite having similar area, precipitation, and land-use, the Umpqua River Basin generates 68 percent more suspended sediment than the Rogue River Basin, chiefly because of the large area of Coast Range sedimentary province in the Umpqua River Basin. By contrast, the Rogue River Basin contains a much larger area of Klamath terrane rocks, which produce significantly less suspended load, although recent fire disturbance (in 2002) has apparently elevated suspended sediment yields in the tributary Illinois River watershed. Fine-scaled analysis, however, will require more intensive, locally focused measurements.

Scientific Investigations Report↗

USGS1969

A seismic-refraction survey of crustal structure in central Arizona

The U.S. Geological Survey conducted a seismic-refraction study of the earth's crust and upper mantle near the Tonto Forest Seismological Observatory (TFO), located 10miles south of the Mogollon Rim near Payson in central Arizona. Two recording lines 400 km long intersect in the approximate form of a cross at TFO; one line trends southeast and the other northeast. The sedimentary layer at most places southwest of the rim is less than 1 km thick, but north of the rim it is 2 to 3 km thick. The velocity in this uppermost layer ranges from 2.6 to 4.7 km/sec, with the higher limit measured near or north of the rim. Arrivals refracted in the upper crust (P g ) can be attributed to two layers for all the shot points south of the rim. The velocity in the upper layer is about 5.9 km/sec with thickness ranging from 2 to 8 km; beneath the upper layer the velocity is about 6.1 km/sec. The upper layer seems to be absent northeast of the rim, where two shot points generated P g arrivals that show only a velocity of 6.2 km/sec. A Poisson ratio of 0.22 for the upper crustal layers was measured from shear and compressional arrivals. The lower crust could not be identified from the first and later refraction arrivals; however, minimum depths to the intermediate layer were determined. An average crustal velocity of 6.2 km/sec was measured from wide-angle reflection alignments. A thin intermediate layer would explain the seismic measurements. A delay-time method was used to map the configuration of the M-discontinuity. The depth below sea level is about 36 km along the northwest-trending line. The northeast-trending line shows a shallow depth of 21 km near Gila Bend, increasing depth to about 34 km under TFO, and a flat M-discontinuity at 40 km depth under the Mogollon Mesa northeast to Sunrise Springs. There is evidence of an abrupt depth change of about 4 km on the M-discontinuity in the vicinity of TFO. The velocity in the upper mantle is 7.85 km/sec. The relation of topographic elevation to crustal thickness suggests an approach to isostatic equilibrium, which is deduced from a near-zero regional free-air gravity anomaly. However, lateral density change in the upper mantle is required to make the crustal-refraction model fit the observed gravity-anomaly values, provided that velocity and density are linearly related.

Arizona↗

USGS1990

Flexure and faulting of sedimentary host rocks during growth of igneous domes, Henry Mountains, Utah

A sequence of sedimentary rocks about 4 km thick was bent, stretched and uplifted during the growth of three igneous domes in the southern Henry Mountains. Mount Holmes, Mount Ellsworth and Mount Hillers are all about 12 km in diameter, but the amplitudes of their domes are about 1.2, 1.85 and 3.0 km, respectively. These mountains record successive stages in the inflation of near-surface diorite intrusions that are probably laccolithic in origin. The host rocks deformed along networks of outcrop-scale faults, or deformation bands, marked by crushed grains, consolidation of the porous sandstone and small displacements of sedimentary beds. Zones of deformation bands oriented parallel to the beds and formation contacts subdivided the overburden into thin mechanical layers that slipped over one another during doming.

Journal of Structural Geology↗

USGS2014

Modification of the Quaternary stratigraphic framework of the inner-continental shelf by Holocene marine transgression: An example offshore of Fire Island, New York

The inner-continental shelf off Fire Island, New York was mapped in 2011 using interferometric sonar and high-resolution chirp seismic-reflection systems. The area mapped is approximately 50 km long by 8 km wide, extending from Moriches Inlet to Fire Island Inlet in water depths ranging from 8 to 32 m. The morphology of this inner-continental shelf region and modern sediment distribution patterns are determined by erosion of Pleistocene glaciofluvial sediments during the ongoing Holocene marine transgression; much of the shelf is thus an actively forming ravinement surface. Remnants of a Pleistocene outwash lobe define a submerged headland offshore of central Fire Island. East of the submerged headland, relatively older Pleistocene outwash is exposed over much of the inner-continental shelf and covered by asymmetric, sorted bedforms interpreted to indicate erosion and westward transport of reworked sediment. Erosion of the eastern flank of the submerged Pleistocene headland over the last ~ 8000 years yielded an abundance of modern sand that was transported westward and reworked into a field of shoreface-attached ridges offshore of western Fire Island. West of the submerged headland, erosion of Pleistocene outwash continues in troughs between the sand ridges, resulting in modification of the lower shoreface. Comparison of the modern sand ridge morphology with the morphology of the underlying ravinement surface suggests that the sand ridges have moved a minimum of ~ 1000 m westward since formation. Comparison of modern sediment thickness mapped in 1996–1997 and 2011 allows speculation that the nearshore/shoreface sedimentary deposit has gained sediment at the expense of deflation of the sand ridges.

New York↗

USGS1998

Nd isotopic composition of cratonic rocks in the southern Death Valley region: Evidence for a substantial Archean source component in Mojavia

Thirty Early Proterozoic intermediate to silicic metasedimentary and metaigneous rocks in the southern Death Valley region and vicinity show ϵ Nd values of −1.6 to −6.3 at 1.7 Ga and Nd model ages of 2.1 to 2.6 Ga. These cratonic rocks thus reveal an older signature than so far reported for Nd province 1 of the western United States; as much as 30%–40% of their mass may be Archean crustal material. The Archean component was introduced in the form of sedimentary detritus that was probably subducted and mixed with juvenile material at a convergent margin. Three younger Precambrian rocks associated with the cratonic rocks also have a Nd isotopic composition of province 1 type.

Geology↗

USGS2002

Resource-assessment perspectives for unconventional gas systems

Concepts are described for assessing those unconventional gas systems that can also be defined as continous accumulations. Continuous gas accumulations exist more or less independently of the water column and do not owe their existence directly to the bouyancy of gas in water. They cannot be represented in terms of individual, countable fields or pools delineated by downdip water contacts. For these reasons, traditional resource-assessment methods based on estimating the sizes and numbers of undiscovered discrete fields cannot not be applied to continuous accumulations. Specialized assessment methods are required. Unconventional gas systems that are also continous accumulations include coalbed methane, basin-centered gas, so-called tight gas, fractured shale (and chalk) gas, and gas hydrates. Deep-basin and bacterial gas systems may or may not be continuous accumulations, depending on their geologic setting. Two basic resource-assessment approaches have been employed for continous accumulations. The first approach is based on estimates of gas in place. A volumetric estimate of total gas in place is commonly coupled with an overall recovery factor to narrow the assessment scope from a treatment of gas volumes residing in sedimentary strata to a prediction of potential additions to reserves. The second approach is based on the production performance of continous gas reservoirs, as shown empirically by wells and reservoir-simulation models. In these methods, production characteristics (as opposed to gas in place) are the foundation for forecasts of potential additions to reserves.

American Association of Petroleum Geologists Bulle↗

USGS1985

Precambrian basement map of the northern Midcontinent, U.S.A.

The northern midcontinent region includes the buried basement of the interior platform and the southernmost exposed Precambrian rocks of the Canadian Shield (see index map). Structurally, it is part of a continent-wide "tectonic collage" consisting of (1) Archean cratonic elements (>2500 Ma) and remnants of Early Proterozoic (-1,900-2,100 Ma) cratonic cover, (2) anastomosing Early Proterozoic orogenic belts culminating at 1,850 Ma and -1,650 Ma, which partly enclose and marginally affect the Archean cratons, and (3) intracratonic igneous and sedimentary rocks, mainly of Middle Proterozoic age but including an older rhyolite-granite terrane (-1,760 Ma) and somewhat younger, scattered quartzite, assigned by Dott (1983) to the "Baraboo interval". The map was compiled as part of a cooperative federal-state project from 1:500,000-scale maps submitted by respective state geological surveys showing basement drill holes, lithotypes or sketchy geologic map units, and basement topography, contoured at 200-foot intervals. In compiling the map, available aeromagnetic (Zietz, 1982; Burchett, 1985) and gravity anomaly maps (Hildenbrand and others, 1982) were utilized to define insofar as possible the trend, extent, and boundaries of individual rock bodies, and all available isotopic age data were used. The principal geologic contribution resulting from the compilation is the delineation of a major buried, northwest-trending Early Proterozoic orogen, named the Central Plains orogen (Sims and Peterman, in press). It extends from Nebraska through Kansas into Missouri, where it is overlapped by Middle Proterozoic rhyolite-granite terranes; and it sharply truncates Archean rocks and an older Proterozoic orogenic (Penokean) belt in the inner part of the craton.

Open-File Report↗

USGS2012

Hydrogeologic framework of the Wood River Valley aquifer system, south-central Idaho

The Wood River Valley contains most of the population of Blaine County and the cities of Sun Valley, Ketchum, Hailey, and Bellevue. This mountain valley is underlain by the alluvial Wood River Valley aquifer system, which consists primarily of a single unconfined aquifer that underlies the entire valley, an underlying confined aquifer that is present only in the southernmost valley, and the confining unit that separates them. The entire population of the area depends on groundwater for domestic supply, either from domestic or municipal-supply wells, and rapid population growth since the 1970s has caused concern about the long-term sustainability of the groundwater resource. As part of an ongoing U.S. Geological Survey effort to characterize the groundwater resources of the Wood River Valley, this report describes the hydrogeologic framework of the Wood River Valley aquifer system. Although most of the Wood River Valley aquifer system is composed of Quaternary-age sediments and basalts of the Wood River Valley and its tributaries, older igneous, sedimentary, or metamorphic rocks that underlie these Quaternary deposits also are used for water supply. It is unclear to what extent these rocks are hydraulically connected to the main part of Wood River Valley aquifer system and thus whether they constitute separate aquifers. Paleozoic sedimentary rocks in and near the study area that produce water to wells and springs are the Phi Kappa and Trail Creek Formations (Ordovician and Silurian), the Milligen Formation (Devonian), and the Sun Valley Group including the Wood River Formation (Pennsylvanian-Permian) and the Dollarhide Formation (Permian). These sedimentary rocks are intruded by granitic rocks of the Late Cretaceous Idaho batholith. Eocene Challis Volcanic Group rocks overlie all of the older rocks (except where removed by erosion). Miocene Idavada Volcanics are found in the southern part of the study area. Most of these rocks have been folded, faulted, and metamorphosed to some degree, thus rock types and their relationships vary over distance. Quaternary-age sediment and basalt compose the primary source of groundwater in the Wood River Valley aquifer system. These Quaternary deposits can be divided into three units: a coarse-grained sand and gravel unit, a fine-grained silt and clay unit, and a single basalt unit. The fine- and coarse-grained units were primarily deposited as alluvium derived from glaciation in the surrounding mountains and upper reaches of tributary canyons. The basalt unit is found in the southeastern Bellevue fan area and is composed of two flows of different ages. Most of the groundwater produced from the Wood River Valley aquifer system is from the coarse-grained deposits. The altitude of the pre-Quaternary bedrock surface in the Wood River Valley was compiled from about 1,000 well-driller reports for boreholes drilled to bedrock and about 70 Horizontal-to-Vertical Spectral Ratio (HVSR) ambient-noise measurements. The bedrock surface generally mimics the land surface by decreasing down tributary canyons and the main valley from north to south; it ranges from more than 6,700 feet in Baker Creek to less than 4,600 feet in the central Bellevue fan. Most of the south-central portion of the Bellevue fan is underlain by an apparent topographically closed area on the bedrock surface that appears to drain to the southwest towards Stanton Crossing. Quaternary sediment thickness ranges from less than a foot on main and tributary valley margins to about 350 feet in the central Bellevue fan. Hydraulic conductivity for 81 wells in the study area was estimated from well-performance tests reported on well-driller reports. Estimated hydraulic conductivity for 79 wells completed in alluvium ranges from 1,900 feet per day (ft/d) along Warm Springs Creek to less than 1 ft/d in upper Croy Canyon. A well completed in bedrock had an estimated hydraulic conductivity value of 10 ft/d, one well completed in basalt had a value of 50 ft/d, and three wells completed in the confined system had values ranging from 32 to 52 ft/d. Subsurface outflow of groundwater from the Wood River Valley aquifer system into the eastern Snake River Plain aquifer was estimated to be 4,000 acre-feet per year. Groundwater outflow beneath Stanton Crossing to the Camas Prairie was estimated to be 300 acre-feet per year.

Idaho↗

USGS1974

Continental depositon of Antarctic tillite indicated by carbon and oxygen isotopes

Freshwater deposition of the upper Paleozoic, Gondwana tillite in the Pensacola Mountains is indicated by low δ values of +4.9 to +6.1 permil δ0 1 8 (SMOW) and -1.8 to -15.9 permil δC 1 3 (PDB) in primary sedimentary calcite within the tillite. In contrast, Cambrian marine limestone from the Pensacola Mountains contains heavy isotopic abundances that are entirely characteristic of marine deposition.

Journal of Research of the U.S. Geological Survey↗

USGS1986

Hydrogeology and ground-water use and quality, Brown County, Wisconsin

The Paleozoic rock of Brown County includes formations of Cambrian, Ordovician, and Silurian age. These formations are eastward-dipping sedimentary rock that rest on Precambrian crystalline rock and are overlain by Pleistocene deposits. The units that are the principal sources of ground water were grouped into three aquifers (upper, St. Peter, and Elk Mound), and the less permeable units are grouped into three confining units (Maquoketa-Sinnipee, St. Lawrence, and Precambrian). The geologic and hydraulic characteristics of the aquifers and confining units are estimated from logs of more than 1,000 Brown County wells, from results of a packer test, and from published values. Recharge to the water table, which was estimated at five monitored sites, ranges from 1 to 6 inches a year; most recharge is contributed by spring snowmelt and rainfall. A cone of depression caused by pumping the deeper aquifers in the Green Bay metropolitan area induces flow from the upper aquifer to the underlying st. Peter aquifer throughout most of the county. Several reaches of Duck Creek and the Suamico River also contribute water to the aquifers. A bout 13 million gallons per day of ground water was pumped in Brown County during 1979, 63 percent of which was from wells open to both the St. Peter and Elk Mound aquifers. Municipal and industrial water users pumped 9.44 million gallons per day or 72 percent of the ground water withdrawn in 1979. Most ground :water in the county is a calcium magnesium bicarbonate type. However, water from wells sampled in an area between the Fox River and Silurian escarpment have elevated levels of sodium (44 milligrams per liter) and sulfate (226 milligrams per liter). Water from wells that tap rocks older than Silurian dolomite contains high concentrations of strontium (more than 2.4 milligrams per liter) and fluoride (more than 0.85 milligrams per liter). A three-dimensional digital model was used to simulate flow in the ground-water system. Model results indicate that sources of ground water pumped from wells tapping the St. Peter and Elk Mound aquifers in Brown County, 1979, include 4.8 million gallons per day of underflow, most of which enters the county across the west border; 1.9 million gallons per day of flow from vertical leakage within the county; and 1.5 million gallons per day from storage. The model is most sensitive to the horizontal hydraulic conductivity of the upper aquifer. Vertical hydraulic conductivity of the confining units and recharge rates to the water-table aquifer are the least well-defined model parameters.

Wisconsin↗

USGS2013

Correlation of geothermal springs with sub-surface fault terminations revealed by high-resolution, UAV-acquired magnetic data

There is widespread agreement that geothermal springs in extensional geothermal systems are concentrated at fault tips and in fault interaction zones where porosity and permeability are dynamically maintained (Curewitz and Karson, 1997; Faulds et al., 2010). Making these spatial correlations typically involves geological and geophysical studies in order to map structures and their relationship to springs at the surface. Geophysical studies include gravity and magnetic surveys, which are useful for identifying buried, intra-basin structures, especially in areas where highly magnetic, dense mafic volcanic rocks are interbedded with, and faulted against less magnetic, less dense sedimentary rock. High-resolution magnetic data can also be collected from the air in order to provide continuous coverage. Unmanned aerial systems (UAS) are well-suited for conducting these surveys as they can provide uniform, low-altitude, high-resolution coverage of an area without endangering crew. In addition, they are more easily adaptable to changes in flight plans as data are collected, and improve efficiency. We have developed and tested a new system to collect magnetic data using small-platform UAS. We deployed this new system in Surprise Valley, CA, in September, 2012, on NASA's SIERRA UAS to perform a reconnaissance survey of the entire valley as well as detailed surveys in key transition zones. This survey has enabled us to trace magnetic anomalies seen in ground-based profiles along their length. Most prominent of these is an intra-basin magnetic high that we interpret as a buried, faulted mafic dike that runs a significant length of the valley. Though this feature lacks surface expression, it appears to control the location of geothermal springs. All of the major hot springs on the east side of the valley lie along the edge of the high, and more specifically, at structural transitions where the high undergoes steps, bends, or breaks. The close relationship between the springs and structure terminations revealed by this study is unprecedented. Collecting magnetic data via UAS represents a new capability in geothermal exploration of remote and dangerous areas that significantly enhances our ability to map the subsurface.

California↗

USGS2011

Mars: the evolutionary history of the northern lowlands based on crater counting and geologic mapping

The geologic history of planetary surfaces is most effectively determined by joining geologic mapping and crater counting which provides an iterative, qualitative and quantitative method for defining relative ages and absolute model ages. Based on this approach, we present spatial and temporal details regarding the evolution of the Martian northern plains and surrounding regions. The highland–lowland boundary (HLB) formed during the pre-Noachian and was subsequently modified through various processes. The Nepenthes Mensae unit along the northern margins of the cratered highlands, was formed by HLB scarp-erosion, deposition of sedimentary and volcanic materials, and dissection by surface runoff between 3.81 and 3.65 Ga. Ages for giant polygons in Utopia and Acidalia Planitiae are ~ 3.75 Ga and likely reflect the age of buried basement rocks. These buried lowland surfaces are comparable in age to those located closer to the HLB, where a much thinner, post-HLB deposit is mapped. The emplacement of the most extensive lowland surfaces ended between 3.75 and 3.4 Ga, based on densities of craters generally View the MathML source> 3 km in diameter. Results from the polygonal terrain support the existence of a major lowland depocenter shortly after the pre-Noachian formation of the northern lowlands. In general, northern plains surfaces show gradually younger ages at lower elevations, consistent local to regional unit emplacement and resurfacing between 3.6 and 2.6 Ga. Elevation levels and morphology are not necessarily related, and variations in ages within the mapped units are found, especially in units formed and modified by multiple geological processes. Regardless, most of the youngest units in the northern lowlands are considered to be lavas, polar ice, or thick mantle deposits, arguing against the ocean theory during the Amazonian Period (younger than about 3.15 Ga). All ages measured in the closest vicinity of the steep dichotomy escarpment are also 3.7 Ga or older. The formation ages of volcanic flanks at the HLB (e.g., Alba Mons (3.6–3.4 Ga) and the last fan at Apollinaris Mons, 3.71 Ga) may give additional temporal constraint for the possible existence of any kind of Martian ocean before about 3.7 Ga. It seems to reflect the termination of a large-scale, precipitation-based hydrological cycle and major geologic processes related to such cycling.

Planetary and Space Science↗

USGS2011

Geologic framework and hydrogeologic characteristics in the southern part of the Rancho Diana Natural Area, northern Bexar County, Texas, 2008-10

The area designated by the city of San Antonio as the Rancho Diana Natural Area is in northern Bexar County, near San Antonio, Texas. During 2008-10, the U.S. Geological Survey, in cooperation with the city of San Antonio, documented the geologic framework and mapped the hydrogeologic characteristics for the southern part of the Rancho Diana Natural Area. The geologic framework of the study area and its hydrogeologic characteristics were documented using field observations and information from previously published reports. Many of the geologic and hydrogeologic features were found by making field observations through the dense vegetation along gridlines spaced approximately 25 feet apart and documenting the features as they were located. Surface geologic features were identified and hydrogeologic features such as caves, sinkholes, and areas of solutionally enlarged porosity were located using hand-held Global Positioning System units. The location data were used to create a map of the hydrogeologic subdivisions and the location of karst features. The outcrops of the Edwards and Trinity aquifer recharge zones were mapped by using hydrogeologic subdivisions modified from previous reports. All rocks exposed within the study area are of sedimentary origin and Lower Cretaceous in age. The valley floor is formed in the cavernous member of the upper Glen Rose Limestone of the Trinity Group. The hills are composed of the basal nodular member, dolomitic member, Kirschberg evaporite member, and grainstone member of the Kainer Formation of the Edwards Group. Field observations made during this study of the exposed formations and members indicate that the formations and members typically are composed of mudstones, wackestones, packstones, grainstones, and argillaceous limestones, along with marls. The upper Glen Rose Limestone is approximately 410 to 450 feet thick but only the upper 70 feet is exposed in the study area. The Kainer Formation is approximately 255 feet thick in the study area and is composed of, in ascending order, the basal nodular member, dolomitic member, Kirschberg evaporite member, and grainstone member. The Edwards and Trinity aquifers contain a combination of fabric-selective and not-fabric-selective porosities. Porosity types observed in the study area that can increase the effective porosity and increase permeability include solutionally enlarged caves, sinkholes, fractures, bedding planes, channels, molds and vugs. Caves found during hydrogeologic mapping might have been spring discharge points, but sufficient downcutting over geologic time in the rocks has occurred so that springs discharge at lower elevations near the creek channel. The mapped caves, sinkholes, and other areas of solutionally enlarged porosity might facilitate recharge during large storm events when runoff occurs on the hillsides; additional areally distributed recharge in the study area occurs as a result of infiltration.

Texas↗

USGS2023

A review of geology and mining in the Marble Mountains, southeastern California

Mining in the Marble Mountains of southeastern California was active in the earliest 1900s and gradually declined to very few active mines by 1959. Most mining consisted of hard-rock prospects and mines, with a few soft-rock prospects and one mine. The Marble Mountains are a 10 km by 30 km, gently NE-dipping dipping structural block composed of Proterozoic plutonic and metamorphic rocks, Paleozoic sedimentary rocks, and Jurassic granitoids exposed along the western anti-dip slopes, and Miocene volcanic and sedimentary rocks exposed along the crest of the range and eastern dip slopes. Mineralization occurred in metamorphic aureoles of intrusions, along dikes, as contact metasomatic replacement bodies in carbonate rocks, or adjacent to or along thrust faults. Mineralization locally formed gold, copper, malachite, azurite, bornite, chalcopyrite, magnetite, specularite, limonite, quartz, epidote, actinolite, and garnet. Hard-rock prospects and mines are clustered into five locations. The mines are small open pits, a few consist of a shaft or two with a few adits, most are just a single shaft or adit. There are a few small open-pit marble mines, and one is an open pit fossil mine. Eight prospects were developed in the Miocene tuffaceous deposits; three in the northwest and five prospects, and a single adit, in the south. Most of the Marble Mountains are now in the Trilobite Wilderness or adjacent Areas of Critical Environmental Concern, and the area of the Golden Cycle district (Castle Mine area) and prospect areas in the southern part of the range are in the Mojave Trails National Monument. The Iron Hat mine, several nearby areas, and the Trilobite mine area are privately owned. No rock or mineral mines are currently active, but the Trilobite mine in the south end of the range is still open to the public.

California↗