Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Science Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71Linked to original sources
USGS2007

Strategic Plan for the North American Breeding Bird Survey: 2006-2010

Executive Summary The mission of the North American Breeding Bird Survey (BBS) is to provide scientifically credible measures of the status and trends of North American bird populations at continental and regional scales to inform biologically sound conservation and management actions. Determining population trends, relative abundance, and distributions of North American avifauna is critical for identifying conservation priorities, determining appropriate conservation actions, and evaluating those actions. The BBS program, jointly coordinated by the U.S. Geological Survey and Environment Canada’s Canadian Wildlife Service, provides the U.S. and Canadian Federal governments, state and provincial agencies, other conservation practitioners, and the general public with science-based avian population trend estimates and other information for regional and national species’ population assessments. Despite the demonstrated value of the BBS for furthering avian conservation across North America, its importance is often underappreciated, and it is underfunded compared with many other government-supported programs that report on status of the environment. Today, BBS resources, adjusted for inflation, are below the amount allocated in the 1970s and are still only sufficient to support two biologists. Yet the number of routes, participants, data, and data requests has quadrupled. Data and information management and delivery requirements and security concerns, non-existent in 1966, impose further demands on BBS resources. In addition, the Mexican expansion of the BBS offers new hope for a truly continental approach to avian conservation, but also brings additional challenges. Meeting the goals of this plan will take cooperation among myriad stakeholders; yet, even with collaboration, most objectives of this plan will be unattainable if BBS program support is not increased. The BBS developed this strategic plan to help set priorities and identify resources required for the program to continue to meet the evolving needs of the conservation community for information on bird population change. By setting clear goals, strategies, and measures of success, this plan provides a cohesive framework and vision for maintenance and development of the BBS. The plan identifies two major goals for the BBS, with a number of strategies and objectives to achieve these goals. Over the next 5 years, progress made in addressing each long-term goal and its associated 5-year strategies and objectives will gage the plan’s success. Specific actions, projected outcomes, and measures of success related to accomplishing these are outlined in Table 1, with a timeline in Table 2. The two main goals for the program, with a summary of the strategies to achieve them, are: Goal 1: Collect scientifically credible measures of the status and trends of North American bird populations at continental and regional scales. The North American Breeding Bird Survey will continue to support North American natural resource conservation through the collection of scientifically credible measures of the status and trends of continental bird populations. While doing this, the BBS will work to improve the science behind the program to better meet its mission and the changing needs of the avian conservation community. In partnership with collaborators, the BBS will address detection probability bias and habitat bias, improve analytical methods, and more fully assess and account for observer quality. Moreover, the BBS will improve the quality and breadth of avian population data through strategic increases in route density and the establishment of a Mexican BBS program. Goal 2: Ensure BBS data and analytical results are widely available and easily accessible for use by the avian conservation and management communities. At the heart of the BBS lies a four-million-record database containing more than 40 years of data on more than 600 bird species. These data are of no value if not well maintained, appropriately analyzed, and widely and easily accessible. The USGS has greatly improved data management and accessibility in recent years. Trend estimates were first made available via the Internet in the mid-1990s, followed closely by the raw data with baseline metadata and standard operating procedures. Nevertheless, numerous enhancements to data management and the usability of BBS results will greatly improve the ability of the BBS to serve avian conservation goals. The BBS needs to ensure that BBS data and results presented on the web site use the best data-management practices and statistical methods, with adequate documentation for users to understand them and any differences between different trend estimates. Moreover, the BBS needs to increase communication with BBS partners and stakeholders to ensure that it continues to meet the avian population status and trends needs of the conservation community and to encourage the development of new products. Working with collaborators, the BBS will develop tools for integrating environmental parameters like habitat change into the analyses, and for integrating BBS data with other avian survey results. In addition, the BBS will continue to improve data and database management through the incorporation of additional data and data fields, such as georeferenced stop locations and more complete metadata for the raw data and results, thus enhancing the uses that can be made of the data.

Circular↗
USGS2010

Seabed photographs, sediment texture analyses, and sun-illuminated sea floor topography in the Stellwagen Bank National Marine Sanctuary region off Boston, Massachusetts

The U.S. Geological Survey, in collaboration with National Oceanic and Atmospheric Administration's National Marine Sanctuary Program, conducted seabed mapping and related research in the Stellwagen Bank National Marine Sanctuary region from 1993 to 2004. The mapped area is approximately 3,700 km (1,100 nmi) in size and was subdivided into 18 quadrangles. An extensive series of sea-floor maps of the region based on multibeam sonar surveys has been published as paper maps and online in digital format (PDF, EPS, PS). In addition, 2,628 seabed-sediment samples were collected and analyzed and are in the usSEABED: Atlantic Coast Offshore Surficial Sediment Data Release. This report presents for viewing and downloading the more than 10,600 still seabed photographs that were acquired during the project. The digital images are provided in thumbnail, medium (1536 x 1024 pixels), and high (3071 x 2048) resolution. The images can be viewed by quadrangle on the U.S. Geological Survey Woods Hole Coastal and Marine Science Center's photograph database. Photograph metadata are embedded in each image in Exchangeable Image File Format and also provided in spreadsheet format. Published digital topographic maps and descriptive text for seabed features are included here for downloading and serve as context for the photographs. An interactive topographic map for each quadrangle shows locations of photograph stations, and each location is linked to the photograph database. This map also shows stations where seabed sediment was collected for texture analysis; the results of grain-size analysis and associated metadata are presented in spreadsheet format.

Data Series↗
USGS2019

U.S. Geological Survey sagebrush ecosystem research annual report for 2019

The sagebrush ( Artemisia spp.) ecosystem extends across a large portion of the Western United States. Affected by multiple stressors, including interactions among fire, exotic plant invasions, and human land uses, this ecosystem has experienced significant loss, fragmentation, and degradation of landscapes once dominated by sagebrush. In turn, wildlife populations have declined following these deleterious conditions. Federal, State, local, and Tribal agencies, nongovernmental organizations, and industry have been galvanized by declining wildlife populations to implement management actions to confront the impacts of these stressors and insure the long-term availability of the sagebrush ecosystem for the broad range of uses critical to stakeholders in the Western United States. The sagebrush ecosystem provides habitat for over 350 species of plants and animals that are dependent on sagebrush for all or part of their annual life history. The greater sage-grouse ( Centrocercus urophasianus ) stands out as the iconic species. Sage-grouse populations occur in 11 States and require relatively large expanses of sagebrush-dominated habitat to meet all their seasonal habitat needs. Recent management actions to conserve and maintain the sagebrush ecosystem have focused on the protection and restoration of sage-grouse habitat. However, each of the 350 species has a unique life history and differing area requirements (for example, large areas for Mule deer [ Odocoileus hemionus ] and small areas for pygmy rabbit [ Brachylagus idahoensis ]), and some species, such as migratory birds, only rely the sagebrush ecosystem for part of the year (for example, Brewer’s sparrow [ Spizella breweri ]). The U.S. Geological Survey (USGS) has a broad research program focused on the sagebrush ecosystem and these species and their response to stressors and management actions. The research is tailored specifically to inform and improve strategies for maintaining existing areas of intact sagebrush and restoring degraded landscapes. By providing the science to inform these strategies, the USGS is assisting land and resource managers at the Federal, State, Tribal, and local levels working towards sustainable wildlife populations and restored landscapes. The USGS provides a foundation of scientific information for use in major land and resource management decisions in the sagebrush ecosystem. These have included such actions as the preclusion of the need to list the greater sage-grouse under the Endangered Species Act and recent revisions to Bureau of Land Management and U.S. Department of Agriculture Forest Service resource management plans. The USGS continues to build on that foundation to inform science-based decisions within the U.S. Department of the Interior and other Federal, State, and local agencies and their continued conservation, management, and restoration of the sagebrush ecosystem to help support local economies.

Arizona, California, Colorado, Idaho, Montana, New↗
USGS2010

Proceedings of the 25th Himalaya-Karakoram-Tibet Workshop

For a quarter of a century the Himalayan-Karakoram-Tibet (HKT) Workshop has provided scientists studying the India-Asia collision system a wonderful opportunity for workshop-style discussion with colleagues working in this region. In 2010, HKT returns to North America for the first time since 1996. The 25th international workshop is held from June 7 to10 at San Francisco State University, California. The international community was invited to contribute scientific papers to the workshop, on all aspects of geoscience research in the geographic area of the Tibetan Plateau and its bounding ranges and basins, from basic mapping to geochemical and isotopic analyses to large-scale geophysical imaging experiments. In recognition of the involvement of U.S. Geological Survey (USGS) scientists in a wide range of these activities, the USGS agreed to publish the extended abstracts of the numerous components of HKT-25 as an online Open-File Report, thereby ensuring the wide availability and distribution of these abstracts, particularly in the HKT countries from which many active workers are precluded by cost from attending international meetings. In addition to the workshop characterized by contributed presentations, participants were invited to attend a pre-meeting field trip from the Coast Ranges to the Sierra Nevada, to allow the international group to consider how the tectonic elements of the Pacific margin compare to those of the Himalayan belt. Following the workshop, the National Science Foundation (NSF) sponsored a workshop on the 'Future directions for NSF-sponsored geoscience research in the Himalaya/Tibet' intended to provide NSF Program Directors with a clear statement and vision of community goals for the future, including the scientific progress we can expect if NSF continues its support of projects in this geographic region, and to identify which key geoscience problems and processes are best addressed in the Himalaya and Tibet, what key datasets are needed, and how NSF can best support the evolving need for interdisciplinary investigations. This workshop also has clear societal relevance. Recent earthquakes have brought international attention to active tectonics and earthquake hazards in the HKT region. Prominent examples include the Mw 7.8 Kokoxili (Qinghai, China) earthquake of 2001, the Mw 7.6 Kashmir (Pakistan) earthquake of 2005, the Mw 7.9 Wenchuan (Sichuan, China) earthquake of 2008, and this year the Mw 6.9 Yushu (Qinghai, China) earthquake. Geological and geophysical field work conducted both before these earthquakes, as well as in response to them, has helped to define the active faults and regional tectonics in the HKT region. The research presented at this workshop provides the framework necessary for improved seismic hazard assessments in this region. The organizers gratefully acknowledge the support of NSF's Continental Dynamics Program and its Office of International Science and Engineering, through award EAR-0965796. We thank San Francisco State University's Sheldon Axler, Dean of the College of Science and Engineering, and Toby Garfield, Director of the Romberg Tiburon Center, for use of their conference facilities; and the Department of Geosciences, particularly Deb Shulman and Miriam Knof, for administrative support. The California Academy of Sciences generously hosted a reception for visiting delegates, and Brad Ritts (Chevron Exploration Technology Company), Todd Greene (California State University, Chico) and John Shervais (Utah State University) together co-led the pre-conference field trip. Technical editing of this volume was led by Roxanne Renedo (U.S. Geological Survey) with assistance from Margaret Milia (Stanford University). We are grateful to the U.S. Geological Survey (USGS) Earthquake Hazards Program and the USGS Menlo Park (California) Publishing Service Center for making this online report possible.

Open-File Report↗
USGS2020

U.S. Geological Survey sagebrush ecosystem research annual report for 2020

The sagebrush ( Artemisia spp.) ecosystem extends across 251,473 square miles over portions of 13 western States. Affected by multiple stressors, including interactions among fire, invasive plants, and human land uses, this ecosystem has experienced significant loss, fragmentation, and degradation of landscapes once dominated by sagebrush. In turn, wildlife populations have declined following these deleterious conditions. Federal, State, local, and Tribal agencies, nongovernmental organizations, and industry have been galvanized by declining wildlife populations to implement management actions to confront the impacts of these stressors and ensure the long-term availability of the sagebrush ecosystem for the broad range of uses critical to stakeholders in the Western United States. The sagebrush ecosystem provides habitat for more than 350 species of plants and animals that are dependent on sagebrush for all or part of their annual life history. The greater sage-grouse ( Centrocercus urophasianus ) stands out as an iconic species of this ecosystem. Sage-grouse populations occur in 11 States, and 2 Canadian Provinces and require relatively large expanses of sagebrush-dominated habitat to meet all their seasonal habitat needs. Recent management actions to conserve and maintain the sagebrush ecosystem have focused on the protection and restoration of sage-grouse habitat; however, each of the 350 species has a unique life history and differing area requirements (for example, large areas for mule deer [ Odocoileus hemionus ] and small areas for pygmy rabbit [ Brachylagus idahoensis ]), and some species, such as migratory birds, rely on various parts of the sagebrush ecosystem but only for part of the year (for example, Brewer’s sparrow [ Spizella breweri ]). The U.S. Geological Survey (USGS) has a broad research program focused on the sagebrush ecosystem, wildlife species within the ecosystem, and the species’ response to stressors and management actions. The program provides a foundation of scientific information for use in major land and resource management decisions in the sagebrush ecosystem. By providing the science to inform these decisions, the USGS is assisting land and resource managers at the Federal, State, Tribal, and local levels working towards the goal of sustainable wildlife populations and restored landscapes. This information can inform planning and management conducted by nongovernmental organizations as well. USGS research is tailored specifically to inform adaptive management, improve strategies for maintaining existing areas of intact sagebrush, and restoring degraded landscapes. Examples of research support for partners include providing information for actions such as the preclusion of the need to list the greater sage-grouse under the Endangered Species Act and recent revisions to Bureau of Land Management and U.S. Department of Agriculture Forest Service resource management plans and land use. The USGS continues to provide foundational science to inform science-based decisions within the U.S. Department of the Interior and other Federal, State, and local agencies and their continued conservation, management, and restoration of the sagebrush ecosystem to help support local economies.

Arizona, California, Colorado, Idaho, Montana, Nev↗
USGS2010

Vegetation classification and distribution mapping report: Canyon de Chelly National Monument

Executive Summary: The classification and distribution mapping of the vegetation of Canyon de Chelly National Monument (CACH) and surrounding environment was accomplished through a multi-agency effort between 2003 and 2007. The National Park Service’s Southern Colorado Plateau Network facilitated the team that conducted the work, which comprised the U.S. Geological Survey’s Southwest Biological Science Center and Fort Collins Science Center, Navajo Natural Heritage Program, Northern Arizona University, and NatureServe. The project team described 48 plant communities for CACH—35 of which were described from quantitative classification based on field-relevé data collected in 2004. Five additional plant communities were based on field relevés collected in a previous study. The team derived four additional plant communities from field observations during the photointerpretation phase of the project, and field documented them during accuracy assessment. The National Vegetation Classification Standard served as a conceptual framework for assigning these plant communities to the alliance and association level. Ten of the 48 plant communities were designated “park specials”, that is, plant communities with insufficient data to describe them as new alliances or associations. The project team also developed a spatial vegetation map database representing CACH, with three different map-class schemas: base, group, and management map classes. The base map classes represented the finest level of spatial detail. Photointerpreters delineated initial polygons through manual interpretation of 2003/2004 1:12,000-scale true color aerial photography supplemented by occasional computer screen digitizing on a mosaic of digitized aerial photos. These polygons were labeled with base map classes during photointerpretation. Field visits verified interpretation concepts. The vegetation map database includes • ? 53 base map classes, which consist of associations and park specials classified with the quantitative analysis • ? additional associations noted during photointerpretation • ? non-vegetated land cover, such as infrastructure, land use, and geological land cover. The base map classes consist of 4,718 polygons in the project area. A field-based accuracy assessment of the base map classes showed the overall accuracy to be 50.8% The group map classes represent aggregations of the base map classes, approximating the group level of the National Vegetation Classification Standard, Version 2 (Federal Geographic Data Committee 2008). Terrestrial ecological systems, as described by NatureServe (Comer et al. 2003), were used as a first approximation of the group level. The project team identified 16 group map classes in this project. The overall accuracy of the group map classes was determined using the same accuracy assessment data as for the base map classes. The overall accuracy of the group representation of vegetation was 79.9%. In consultation with park staff, the team developed management map classes that consisted of park-defined groupings of base map classes and were intended to represent a balance between maintaining required accuracy and providing a focus on vegetation of particular interest or import to park managers. The 28 management map classes have an overall accuracy of 77.1%. While the main products of this project are the vegetation classification and the vegetation map database, a number of ancillary geographic information system and digital database products were also produced that can be used independently, or to augment the main products. These products include shapefiles of the location of field-collected data and relational databases of field-collected data.

Report↗
USGS2001

Interparticle migration of metal cations in stream sediments as a factor in toxics transport

Sorption of metal cations by stream sediments is an important process affecting the movement of released contaminants in the environment. The ability of cations to desorb from one sediment particle and subsequently sorb to another can greatly affect metal transport rates but rates for this process have not been reported. The objective of this study was to determine the rate at which sorbed metals can migrate from contaminated sediment particles to uncontaminated sediment particles as a function of the concentration of the contaminating solution and the duration of the contact with the contaminating solution. Samples of small sediment particles were exposed to solutions containing cobalt, after which they were rinsed and combined with larger uncontaminated sediment particles in the presence of stream water. Initial concentrations of the contaminating solution ranged from 1ng/l to 1000mg/l and exposures to the contaminating solution ranged from 6h to 14 days. The rate of the migration increased with increasing concentrations in the contaminating solution and with decreasing times of exposure to the contaminating solution. Under the conditions of these experiments, the time required for the migration to reach equilibrium was on the order of months or longer. In separate experiments, the kinetics of adsorption and desorption of cobalt were measured as a function of concentration of the contaminating solution. The time required to reach adsorption equilibrium increased with increasing concentration in the contaminating solution. Times to sorption equilibrium were on the order of months. Desorption was much slower than adsorption and, together with intraparticle diffusion, probably controls the rate of migration from contaminated to uncontaminated sediment. The results of this study show that interparticle migration of metal cations can proceed at significant rates that are strongly influenced by the length of time that the metal has been in contact with the sediment. Copyright ?? 2001 Elsevier Science B.V.Sorption of metal cations by stream sediments is an important process affecting the movement of released contaminants in the environment. The ability of cations to desorb from one sediment particle and subsequently sorb to another can greatly affect metal transport rates but rates for this process have not been reported. The objective of this study was to determine the rate at which sorbed metals can migrate from contaminated sediment particles to uncontaminated sediment particles as a function of the concentration of the contaminating solution and the duration of the contact with the contaminating solution. Samples of small sediment particles were exposed to solutions containing cobalt, after which they were rinsed and combined with larger uncontaminated sediment particles in the presence of stream water. Initial concentrations of the contaminating solution ranged from 1 ng/l to 1000 mg/l and exposures to the contaminating solution ranged from 6 h to 14 days. The rate of the migration increased with increasing concentrations in the contaminating solution and with decreasing times of exposure to the contaminating solution. Under the conditions of these experiments, the time required for the migration to reach equilibrium was on the order of months or longer. In separate experiments, the kinetics of adsorption and desorption of cobalt were measured as a function of concentration of the contaminating solution. The time required to reach adsorption equilibrium increased with increasing concentration in the contaminating solution. Times to sorption equilibrium were on the order of months. Desorption was much slower than adsorption and, together with intraparticle diffusion, probably controls the rate of migration from contaminated to uncontaminated sediment. The results of this study show that interparticle migration of metal cations can proceed at significant rates that are strongly influenced by the length of time that the metal has

Journal of Hazardous Materials↗
USGS2017

Species distribution models for a migratory bird based on citizen science and satellite tracking data

Species distribution models can provide critical baseline distribution information for the conservation of poorly understood species. Here, we compared the performance of band-tailed pigeon ( Patagioenas fasciata) species distribution models created using Maxent and derived from two separate presence-only occurrence data sources in New Mexico: 1) satellite tracked birds and 2) observations reported in eBird basic data set. Both models had good accuracy (test AUC > 0.8 and True Skill Statistic > 0.4), and high overlap between suitability scores ( I statistic 0.786) and suitable habitat patches (relative rank 0.639). Our results suggest that, at the state-wide level, eBird occurrence data can effectively model similar species distributions as satellite tracking data. Climate change models for the band-tailed pigeon predict a 35% loss in area of suitable climate by 2070 if CO 2 emissions drop to 1990 levels by 2100, and a 45% loss by 2070 if we continue current CO 2 emission levels through the end of the century. These numbers may be conservative given the predicted increase in drought, wildfire, and forest pest impacts to the coniferous forests the species inhabits in New Mexico. The northern portion of the species’ range in New Mexico is predicted to be the most viable through time.

New Mexico↗
USGS2006

North American prairie wetlands are important nonforested land-based carbon storage sites

We evaluated the potential of prairie wetlands in North America as carbon sinks. Agricultural conversion has resulted in the average loss of 10.1 Mg ha- 1 of soil organic carbon on over 16 million ha of wetlands in this region. Wetland restoration has potential to sequester 378 Tg of organic carbon over a 10-year period. Wetlands can sequester over twice the organic carbon as no-till cropland on only about 17% of the total land area in the region. We estimate that wetland restoration has potential to offset 2.4% of the annual fossil CO2 emission reported for North America in 1990. ?? 2005 Elsevier B.V. All rights reserved.

Science of the Total Environment↗
USGS2002

Timing and warmth of the Last Interglacial period: New U-series evidence from Hawaii and Bermuda and a new fossil compilation for North America

The timing and duration of the Last Interglacial period have been controversial, with some studies suggesting a relatively short duration that is orbitally forced and others suggesting a long duration that is at most only partly related to orbital forcing. New, high-precison thermal ionization mass spectrometric (TIMS) U-series ages of Last Interglacial corals from Hawaii and Bermuda test these competing hypotheses. Waimanalo Formation corals from slowly uplifting Oahu, Hawaii range in age from ???134 to ???113 ka, with most ages between ???125 and ???115 ka. Combined with published U-series ages from nearby Lanai, the data suggest a long Last Interglacial period that may have occurred from ???136 to at least 115 ka. The results indicate that orbital forcing may not have been the only control on ice sheet growth and decay, because sea level would have been high at times of relatively low Northern Hemisphere summer insolation. On tectonically stable Bermuda, deposits from the ???200 ka (penultimate interglacial period), ???120 ka (peak Last Interglacial period) and ???80 ka (late Last Interglacial period) high sea stands have been newly dated. Fossil corals on Bermuda are derived from patch reefs that likely were "catch-up" responses to sea level rise. It is expected that U-series ages of Last-Interglacial corals on Bermuda should overlap with, but not be as old as the range of corals on Oahu. Last-Interglacial corals on Bermuda give a range of ???125-113 ka, which supports this hypothesis. A large number of emergent marine deposits on Hawaii, Bermuda and along coastal North America have now been dated to the Last Interglacial period. Both Oahu and Bermuda have marine invertebrate faunas with a number of extralimital southern species of mollusks, suggesting warmer-than-present waters during the Last Interglacial period. Warmer waters are also suggested for Last-Interglacial localities around most of North America, from Florida to Canada and Greenland and Baja California to Alaska. These observations are consistent with similar warm-water faunas of Last-Interglacial age reported from Japan, the Mediterranean basin and Western Australia. It is likely that significant changes in ocean currents took place during the Last Interglacial period, with a movement of relatively warm waters to higher latitudes than is the case today. ?? 2002 Elsevier Science Ltd. All rights reserved.

Quaternary Science Reviews↗
USGS2008

Topographic mapping

The U.S. Geological Survey (USGS) produced its first topographic map in 1879, the same year it was established. Today, more than 100 years and millions of map copies later, topographic mapping is still a central activity for the USGS. The topographic map remains an indispensable tool for government, science, industry, and leisure. Much has changed since early topographers traveled the unsettled West and carefully plotted the first USGS maps by hand. Advances in survey techniques, instrumentation, and design and printing technologies, as well as the use of aerial photography and satellite data, have dramatically improved mapping coverage, accuracy, and efficiency. Yet cartography, the art and science of mapping, may never before have undergone change more profound than today.

General Information Product↗
USGS1972

Acoustic-reflection profiles, eastern Greater Antilles: Leg 3, 1971 cruise, UNITEDGEO I

Introduction As part of a cooperative marine research program designated the Internataional Decade of Ocean Exploration (IDOE), the United states Geological Survey is participating in an investigation of the geologic framework and resource potential of continental margins and small ocean basins in the Gulf of Mexico, Caribbean Sea, and west African continental shelf areas. These studies are funded through the National Science Foundation. Legs 1 and 2, completed June 22 and July 8, respectively, were concerned with subbottom features of the Bay of Campeche and with the tectonic framework of the continental margin east of the Yucatan Peninsula. Leg 3, described in this report was conducted in the Antilles region of the northeastern Caribbean between July 17 and August 4, 1971. This report presents the unedited records of the approximately 5840 km of acoustic reflection profiling made during Leg 3. Magnetic and gravity data were collected also but are being reported elsewhere in conjunction with the results of the study.

Report↗
USGS2021

U.S. Geological Survey invasive species research—Improving detection, awareness, decision support, and control

More than 6,500 nonindigenous species are now established in the United States, posing risks to human and wildlife health, native plants and animals, and our valued ecosystems. The annual environmental, economic, and health-related costs of invasive species are substantial. Invasive species can drive native species onto the endangered species list, resulting in associated regulatory costs; exacerbate the threat of wildland fire, which destroys property and threatens lives; increase the cost of delivering water and power; damage infrastructure; and degrade recreation opportunities and discourage tourism. The U.S. Geological Survey (USGS) works with sister agencies in the U.S. Department of the Interior (DOI) and other Federal, State, and territorial agencies, Tribes, and other stakeholders to provide information and tools needed to help solve problems posed by invasive species across the country. Key components of USGS invasive species science include developing novel prevention, forecasting, early detection, decision support, and control tools.

Circular↗
USGS2025

U.S. Geological Survey science strategy to address white-nose syndrome and bat health in 2025–2029

Since its discovery in 2006, the fungal disease known as white-nose syndrome (WNS) has killed millions of bats. Of the 47 bat species native to the conterminous United States, Alaska, Hawaii, and Canada, 12 have been affected by WNS, including 3 endangered species and 1 proposed endangered species. WNS has also been detected in 40 States and 9 Canadian Provinces. U.S. Geological Survey (USGS) scientists have been critical in identifying the causal fungus for WNS ( Pseudogymnoascus destructans [Pd]), characterizing the effects of WNS, and tracking the spread of Pd in many bat populations in North America. The mission of the USGS WNS and Bat Health Science Team is to deliver integrated science in order to build resiliency into free-ranging bat populations through more effective WNS management, build capacity for bat health science, and enhance bat health information sharing across USGS science centers and cooperative research units as well as with stakeholders. The USGS can play an important role in supporting regional and national capacity building by providing resources and guidance to local, State, and Tribal management entities and by providing tools to enhance disease management. The USGS Ecosystems Mission Area’s Biological Threats and Invasive Species Research Program is the lead Federal program for free-ranging wildlife disease research and surveillance. As of 2024, guided by the science priorities set by the WNS Steering Committee, USGS scientists are engaged in a nationwide response to WNS. This work is done in close coordination with our partners at the U.S. Fish and Wildlife Service, National Park Service, Bureau of Land Management, U.S. Forest Service of the U.S. Department of Agriculture, U.S. Department of Defense, as well as State and Tribal agencies. In addition to conducting WNS research, the USGS is mapping the spread of WNS and coordinating the North American Bat Monitoring Program (NABat) to understand how WNS and other stressors affect the status and trends of native bats across their range. The USGS is supporting the national WNS response through four science goals: (1) provide situational awareness on the health of bat populations; (2) conduct ecological studies of bats along the gradient of disease vulnerability; (3) contribute actionable science to enhance the resiliency of bat populations; and (4) implement an adaptive, holistic approach to bat health.

Circular↗
USGS2010

EAARL Coastal Topography and Imagery-Assateague Island National Seashore, Maryland and Virginia, Post-Nor'Ida, 2009

These remotely sensed, geographically referenced color-infrared (CIR) imagery and elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Assateague Island National Seashore in Maryland and Virginia, acquired post-Nor'Ida (November 2009 nor'easter) on November 28 and 30, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar(EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2010

EAARL coastal topography and imagery-Fire Island National Seashore, New York, 2009

These remotely sensed, geographically referenced color-infrared (CIR) imagery and elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Fire Island National Seashore in New York, acquired on July 9 and August 3, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral CIR camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2013

EAARL coastal topography and imagery–Western Louisiana, post-Hurricane Rita, 2005: First surface

These remotely sensed, geographically referenced color-infrared (CIR) imagery and elevation measurements of lidar-derived first-surface (FS) topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, Virginia. This project provides highly detailed and accurate datasets of a portion of the Louisiana coastline beachface, acquired post-Hurricane Rita on September 27-28 and October 2, 2005. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the National Aeronautics and Space Administration (NASA) Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Website.

Louisiana↗
USGS2014

EAARL-B coastal topography: Fire Island, New York, pre-Hurricane Sandy, 2012: seamless (bare earth and submerged)

These remotely sensed, geographically referenced elevation measurements of lidar-derived seamless (bare-earth and submerged) topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida. This project provides highly detailed and accurate datasets for part of Fire Island, New York, acquired pre-Hurricane Sandy on October 27, 2012. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar, known as the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), was used during data acquisition. The EAARL-B system is a raster-scanning, waveform-resolving, green-wavelength (532-nm) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL-B sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, down-looking red-green-blue (RGB) and infrared (IR) digital cameras, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL-B platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL-B system. The resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed originally in a NASA-USGS collaboration. The exploration and processing of lidar data in an interactive or batch mode is supported using ALPS. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. The Airborne Lidar Processing System (ALPS) is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Web site.

New York↗