Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Reliability Engineering and System Safety (RESS)”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,693 records · Page 71Linked to original sources
USGS2024

Earthquake scenario development in conjunction with the 2023 USGS National Seismic Hazard Model

We present earthquake scenarios developed to accompany the release of the 2023 update to the US Geological Survey National Seismic Hazard Model (NSHM). Scenarios can serve a range of local and regional needs, from developing proactive-targeted mitigation strategies for minimizing impending risk to aiding emergency management planning. These deterministic scenarios can also be used to communicate seismic hazard and risk to audiences who are not well versed in methods, such as probabilistic seismic hazard analyses. Specifically, we discuss the scenarios developed, challenges, and lessons learned in the development process, and how this work aided the development of the 2023 NSHM itself. In total, 28 scenarios were developed for Hawaii, Utah, Alaska, and Virginia considering the 2023 NSHM science, past scenario efforts, and input from local experts and stakeholders. Finally, we investigate how NSHM modeling decisions can change estimated impacts to Utah and Hawaii in more detail showing, for example, that a shallower dip of the Wasatch fault under Salt Lake City can increase predicted ground-motion intensities and therefore estimated losses and deaths.

Earthquake Spectra↗
USGS2024

Post-wildfire debris flows

Post-wildfire debris flows pose severe hazards to communities and infrastructure near and within recently burned mountainous terrain. Intense heat of wildfires changes the runoff characteristics of a watershed by combusting the vegetative canopy, litter, and duff, introducing ash into the soil and creating water repellant soils. Following wildfire, rainfall on bare ground is less able to infiltrate into the fire-altered soils and overland flow is less impeded by vegetation. Rainfall runoff in recently burned areas can erode hillslopes owing to the removal of soil binding organic matter near the soil surface by fire. In channels, loose, dry-ravel deposits composed of sand and gravel are readily entrained by concentrated runoff in channels. Entrainment of soil on hillslopes and in channels bulks up the sediment concentration of the rainfall runoff to generate debris flows capable of transporting boulders and large woody debris. Post-wildfire debris flows can be triggered by rainfall conditions that would typically produce little runoff during unburned conditions. The primary rainfall trigger for post-wildfire debris flows is high intensity rainfall during short duration convective rainstorms or periods of high rainfall intensity embedded within a long-duration frontal storm. Numerous observations of debris flows triggered by storms lasting less than an hour following periods of little to no rainfall indicate that antecedent rainfall is not a requirement for initiation of post-wildfire debris flows. Post-wildfire debris-flow hazard assessment entails estimating probability and magnitude of debris flows in the burned area, estimating debris-flow runout and intensity, and defining rainfall intensity-duration thresholds for debris-flow initiation. In the United States, probability and magnitude is estimated using empirically derived models largely based on data collected in southern California. The models provide maps to identify watersheds and drainage paths where post-wildfire hazards are most pronounced. Rainfall intensity-duration thresholds can be incorporated into flood hazard forecasting tools. Currently, work is underway to identify how to best implement debris-flow runout models in burned areas with efficiency and accuracy. Post-wildfire debris flows have been a long-recognized process in the Transverse Ranges of southern California; however, climate change is driving more frequent wildfires to burn more mountainous terrain throughout the western United States and worldwide. As a result, post-wildfire debris flows are becoming a more common threat in areas where they were once infrequent. As the threat of post-wildfire debris flow expands into new areas, evaluating the hazard becomes challenging because the degree to which wildfire increases debris-flow susceptibility varies from region to region. This chapter summarizes the knowledge to date for evaluating post-wildfire debris-flow susceptibility and hazard assessment. We summarize the characteristics of wildfire burn severity, topography, underlying soil and geology, and rainfall conditions that contribute to making a watershed most likely to produce post-wildfire debris flows. Methods for hazard assessment in the United States and other countries are summarized. We highlight knowledge gaps for how post-wildfire debris-flow susceptibility varies throughout the western United States and worldwide and identify research needs to improve hazard assessment methods in different geographies.

Book chapter↗
USGS2024

Uncertainty and spatial correlation in station measurements for mb magnitude estimation

The body‐wave magnitude (⁠⁠) is a long‐standing network‐averaged, amplitude‐based magnitude used to estimate the magnitude of seismic sources from teleseismic observations. The U.S. Geological Survey National Earthquake Information Center (NEIC) relies on in its global real‐time earthquake monitoring mission. Although waveform modeling‐based moment magnitudes are the modern standard to characterize earthquake size, is important because (1) in many cases, waveform modeling is not possible (e.g., low signal‐to‐noise events), (2) is applicable over a broad range of magnitudes, ∼M 4–7, and (3) there is a many decades‐long history of estimating magnitudes. We use the NEIC Preliminary Determination of Epicenters earthquake catalog to investigate the uncertainty in NEIC station measurements. We show that measurements are spatially correlated, which can bias event ⁠, and we describe an empirical relation between this spatial correlation and station‐to‐station distance. We further describe an approach to mitigate bias from the spatial correlation. Accounting for the spatial covariance of observations can change the event from −0.15 to 0.07 units (10th to 90th percentile) for smaller events (⁠⁠). These smaller events have the largest standard deviations ranging from 0.05 to 0.15 units (10th to 90th percentile).

The Seismic Record↗
USGS2024

Seismicity and anisotropic imaging reveal an active detachment beneath the northern Alaska Range foothills

North of the Denali Fault, the collision between the Yakutat block with North America is accommodated by a fold-thrust belt giving rise to the northern Alaska Range foothills. At the western end, the Kantishna Hills anticline hosts prominent microseismicity and surface deformation, interpreted as active folding of the Kantishna Hills anticline above a midcrustal detachment. We test for this detachment by using anisotropy-aware receiver functions to image fabric contrasts within the crust in context with seismicity. Seismic stations near the crest of the Kantishna Hills anticline and near its southern flank show a single strong contrast in dipping fabric at depths of 12–13 km near microseismicity clustering depths, consistent with a detachment plane beneath the fold. A minimum b -value at 10–13 km depth is consistent with seismicity on the detachment, compatible with the imaged anisotropic contrast, while off-fault seismicity is shallower and deeper with smaller magnitudes. South-dipping imbricate thrusts in schist characterize the northern Alaska Range foothills structure. This supports our interpretation of the observed anisotropy as reflecting SSW–SSE-dipping foliation above a detachment at ∼10–13 km depth that exploits existing crustal weaknesses along subtle fabric contrasts observed in the seismically quiescent region north of the actively deforming belt.

Alaska↗
USGS1991

Reconnaissance of the occurrence of agricultural chemicals in ground water in Haywood, Lake, Obion and Shelby Counties, Tennessee

Data on the occurrence of agricultural chemicals in ground wafer in Tennessee are sparse. The surficial alluvial aquifer is an important source of domestic water supply in West Tennessee, and potentially is subject fo contamination from the application of agricultural chemicals in the area. Nineteen shallow wells completed in the alluvial aquifers in areas of high density agricultural use were sampled in the winter and again in the summer of 1988 to ascertain the occurrence of agricultural chemical in ground water. Although no triazine herbicides or organophosphorus insecticides were detected in any of the wells sampled, elevated nitrite plus nitrate (as nitrogen) concentrations were detected. Results from the winter sampling period indicate a range of nitrite plus nitrate (as nitrogen) concentrations of less than 0.1 to 7.8 milligrams per liter with a median concentration of 2.6 milligrams per liter. Results from the summer sampling period indicate a range of nitrite plus nitrate (as nitrogen) concentrations of less than 0.1 to 8.9 milligrams per liter, median, 2.5 milligrams per liter. The highest concentrations occurred in the shallowest wells, and, in one instance, in a shallow well near a heavily irrigated field.

Tennessee↗
USGS2025

New constraints on location and timing of the Great Lakes tectonic zone, central Upper Peninsula, Michigan, USA

The Great Lakes tectonic zone (GLTZ) forms the boundary between the Wawa–Abitibi and Minnesota River Valley subprovinces within the Archean Superior Province. The GLTZ is concealed for all of its 1100 km length, except for a segment in the central Upper Peninsula of Michigan. There, it is exposed as a northwest-striking mylonite zone along a 11 km segment, extending to the onlap of Paleozoic rocks to the east. Farther east, its location has been unknown. Here, we use aeromagnetic and gravity data to develop interpretations of the expression of the GLTZ and to define its extent under cover. Aeromagnetic gradients over the mylonite zone are interpreted to be produced by structurally juxtaposed rocks with varying magnetizations. Gravity data show a regional gradient along the GLTZ, produced by the juxtaposition of a dense greenstone belt on the north against lower-density gneisses and granites on the south. The GLTZ is interpreted to extend ∼55 km under cover to the east. The GLTZ is terminated on the east by the buried eastern arm of the ca. 1100 Ma Midcontinent Rift. An undeformed granitic dike that cuts the mylonitic foliation produces a U–Pb apatite age of 2523 ± 33 Ma, implying no major post-Archean shearing occurred, and is at odds with previous interpretations of major Proterozoic reactivation. A granite intrusion in the Minnesota River Valley subprovince produces a Pb–Pb zircon age of 2606.9 ± 3.6/7.4 Ma. This suggests that magmatism related to the Sacred Heart orogeny, previously known in Minnesota, extended to Michigan.

Michigan↗
USGS2026

Indirect mineral import reliance and provenance

Mineral commodity supply chain analyses rely on international trade data reported by individual countries as quantities of a mineral commodity form imported from (or exported to) a partner. However, export quantities frequently exceed a country’s domestic production, or occur when no production data are reported, suggesting that the trade partner is merely an intermediary in a transshipment. These discrepancies can result in misleading conclusions regarding supply chain vulnerabilities and dependencies. We present a two-stage methodology to reconcile gaps between reported material sources and actual producers. First, we construct trade networks for specific mineral forms, treating production as a type of import to distinguish producing nations from entrepôts. By tracing flows through these networks, we attribute a target country’s imports to original producers via both direct (in a single trade link) and indirect (transferring through intermediaries) pathways. Second, these production-attributed flows are incorporated into multi-stage supply chains to determine the upstream provenance of feedstock for domestic refining and processing. This approach provides a more representative picture of trade reliance. For example, while the United States (U.S.) Geological Survey reports no imports of unwrought antimony metal from Russia in 2022 (U.S. Geological Survey (2025). Mineral Commodity Summaries 2025. 10.3133/mcs2025), our analysis reveals that over 16% of U.S. imports can be traced back to Russian mining through intermediate processing in countries such as China, India, and Vietnam. Additionally, our analysis of the aluminum supply chain shows that while the U.S. is reported as 52% net import reliant on aluminum materials in 2022, it is 100% reliant on foreign bauxite, 7% of which arrived indirectly. This unreported reliance, which is predominantly tied to bauxite mined in Brazil (43%) and Jamaica (28%), highlights our methods ability to capture the supply chain’s dependence on foreign feedstock that may be missing in single-stage trade data.

Mineral Economics↗
USGS2024

Debris-flow entrainment modelling under climate change: Considering antecedent moisture conditions along the flow path

Debris-flow volumes can increase along their flow path by entraining sediment stored in the channel bed and banks, thus also increasing hazard potential. Theoretical considerations, laboratory experiments and field investigations all indicate that the saturation conditions of the sediment along the flow path can greatly influence the amount of sediment entrained. However, this process is usually not considered for practical applications. This study aims to close this gap by combining runout and hydrological models into a predictive framework that is calibrated and tested using unique observations of sediment erosion and debris-flow properties available at a Swiss debris-flow observation station (Illgraben). To this end, hourly water input to the erodible channel is predicted using a simple, process-based hydrological model, and the resulting water saturation level in the upper sediment layer of the channel is modelled based on a Hortonian infiltration concept. Debris-flow entrainment is then predicted using the RAMMS debris-flow runout model. We find a strong correlation between the modelled saturation level of the sediment on the flow path and the channel-bed erodibility for single-surge debris-flow events with distinct fronts, indicating that the modelled water content is a good predictor for erosion simulated in RAMMS. Debris-flow properties with more complex flow behaviour (e.g., multiple surges or roll waves) are not as well predicted using this procedure, indicating that more physically complete models are necessary. Finally, we demonstrate how this modelling framework can be used for climate change impact assessment and show that earlier snowmelt may shift the peak of the debris-flow season to earlier in the year. Our novel modelling framework provides a plausible approach to reproduce saturation-dependent entrainment and thus better constrain event volumes for current and future hazard assessment.

Illgraben basin↗
USGS2025

Factors regulating the potential for freshwater mineral soil wetlands to function as natural climate solutions

There are increasing global efforts and initiatives aiming to tackle climate change and mitigate its impacts via natural climate solutions (NCS). Wetlands have been considered effective NCS given their capacity to sequester and retain atmospheric carbon dioxide (CO 2 ) while also providing a myriad of other ecosystem functions that can assist in mitigating the impacts of climate change. However, wetlands have a dual impact on climate, influencing the atmospheric concentrations of both CO 2 and methane (CH 4 ). The cooling effect associated with wetland CO 2 sequestration can be counterbalanced by the warming effect caused by CH 4 emissions from wetlands. The relative ability of wetlands to sequester CO 2 versus emit CH 4 is dependent on a suite of interacting physical, chemical, and biological factors, making it difficult to determine if/which wetlands are considered important NCS. The fact that wetlands are embedded in landscapes with surface and subsurface hydrological connections to other wetlands (i.e., wetlandscapes) that flow over and through geochemically active soils and sediments adds a new layer of complexity and poses further challenges to understanding wetland carbon sequestration and greenhouse gas fluxes at large spatial scales. Our review demonstrates how additional scientific advances are required to understand the driving mechanisms associated with wetland carbon cycling under different environmental conditions. It is vital to understand wetland functionality at both wetland and wetlandscape scales to effectively implement wetlands as NCS to maximize ecological, social, and economic benefits.

Wetlands↗
USGS2025

Land application of drill waste: A scope analysis

Drilling fluid waste land application, a process where drilling wastes are spread and tilled into the land surface, has become common in some petroleum-producing states, however, the potential benefits and risks of this practice are not well studied. Drilling fluids can be water- or oil-based and can have high concentrations of total soluble salts and total petroleum hydrocarbons. Comprehensive chemical characterization of these fluids is not well documented in the literature, and the extent of land application is largely unknown. We hypothesized that the land application of drill waste would fluctuate over time due to economic factors. To begin to understand the extent of historical and potential future land application, we analyzed data from over 5,800 drilling fluid land application permits collected by the Oklahoma Corporation Commission for years 2000, 2005, 2010, and 2015–2020. During the years studied, drilling fluid wastes were applied to more than 250,000 acres in Oklahoma, with over 54,000 thousand barrels (Mbbl) of liquids and nearly 21,000 Mbbl of solids applied. Land application is widespread (occurring in 59/77 counties), however recent drilling activity, land availability, and the economics of transportation have created conditions favorable for land application specifically in the Anadarko Basin. Land application can co-occur with sensitive areas, such as important groundwater and surface-water drinking sources and agricultural fields used for subsistence or feed crop production. Our approach for quantifying the extent of land application, along with further chemical characterization studies, can aid operators and land managers who are considering this practice in assessing the associated benefits and risks.

Oklahoma↗
USGS2026

Rare earth element potential in coal and coal ash in the U.S. Gulf Coast

United States heavy reliance on imports of critical minerals (CMs), including rare earth elements (REEs), underscores the importance of development of domestic sources. The study objective was to quantify CM and REE concentrations in coal and coal ash in the US Gulf Coast region. CM and REE concentrations were measured for 118 samples from outcrops and 14 mines in the Gulf Coast. Results show that total REE + Yttrium (REY) concentrations (dry coal basis) are comparable to those of the upper continental crust (UCC) with localized hot spots, such as the Texas Gibbons Creek mine (REY ≤ ~ 2860 ppm). When normalized to UCC REY concentration (169 ppm, dry coal basis), REY to UCC ratios for Gulf Coast coal samples range from 0.1 to 17 (median ratio 0.6). REE extractability from lignites is high (median: 63%–93%) using environmentally benign weak acid. In addition to raw coal, coal ash from power plants could also serve as an REE source with a median ratio of REY in ash relative to coal of 4; however, extractability from coal ash is generally much lower (≤ 5% using the same weak acid as in coal). The median basket price for extracted REY as oxides from coal, assuming 70% extractability, is $3.2 per tonne of coal and $186 billion based on 58 billion metric tonnes of dry coal in the Gulf Coast. REEs important for magnets (Pr + Nd + Tb + Dy) account for ~ 80% of the total value. The corresponding median basket price for extracted REY as oxides from coal ash, assuming ~ 30% extractability, is ~$4.4 per tonne of ash and $1.2 billion based on 258 million tonnes of ash. REE production from coal would likely require co-products, such as activated carbon or humic acids, to attain economic viability. Production of REEs from coal ash could offset remediation costs related to potential water contamination. This reconnaissance study shows the potential for REE production from coal and coal ash in the Gulf Coast; however, carbon coproducts and/or societal benefits would likely be required for socioeconomic viability.

Alabama, Florida, Louisiana, Mississippi, Texas↗
USGS2024

Earthquake cycle mechanics during caldera collapse: Simulating the 2018 Kīlauea eruption

In multiple observed caldera-forming eruptions, the rock overlying a draining magma reservoir dropped downward along ring faults in sequences of discrete collapse earthquakes. These sequences are analogous to tectonic earthquake cycles and provide opportunities to examine fault mechanics and collapse eruption dynamics over multiple events. Collapse earthquake cycles have been studied with zero-dimensional slider-block models, but these do not account for the complicated interplay between fluid and elastic dynamics or for factors such as the heterogeneous fault properties and non-vertical ring fault geometries often inferred at volcanoes. We present two-dimensional axisymmetric mafic piston-like collapse earthquake cycle models that include rate-and-state friction, fully-dynamic elasticity, and compressible viscous fluid magma flow. We demonstrate that collapse earthquake intervals and magnitudes are highly sensitive to inertial effects, evolving stress fields, fault geometry, and depth-varying fault friction. Given the consistent earthquake cycles observed in most eruptions, this suggests that ring faults can quickly stabilize and often become nearly vertical at depth. We use the well-monitored 2018 collapse sequence at Kı̄lauea as a case study. Our model can produce many features of Kı̄lauea seismic and geodetic observations, except for a significant amount of interseismic slip, which cannot be readily explained with simple rate-and-state friction parameterizations.

Hawaii↗
USGS1991

Wetland sedimentation and vegetation patterns near selected highway crossings in West Tennessee

Wetland sedimentation and vegetation patterns at 11 highway crossings in West Tennessee were studied from 1987 to 1989. The purpose of the study was to investigate potential adverse effects of highway crossings on wetlands. Sedimentation rates, determined from root-burial depths, were highly variable. Average rates offine-grained deposition ranged from 0.005 to 0.033 foot per year for stations in locally ponded areas and from -0.002 to 0.039 foot per year for stations in drained areas. Sedimentation rates upstream from highway crossings were not significantly different from downstream rates at 8 of the 11 study sites. Three study sites had significantly greater sedimentation rates downstream. Sand splays were observed downstream from bridges at most study sites. Vegetation patterns and tree growth appear most strongly related to hydropetiod, defined as the average length of time an area is covered by water each year. The influence of sedimentation on tree growth is difficult to separate from the influence of hydroperiod because areas with high sedimentation rates typically have long hydroperiods. Estimated hydroperiod increased no more than 1 percent because of backwater from the highway crossings at the 11 study sites, while the estimated average depth of flood-plain inundation increased by an average of 6 percent.

Tennessee↗
USGS2025

Critical mineral inventory of select IOA-IOCG deposits, southwestern USA

Critical minerals are necessary for modern technology and strategic purposes. Their increasing importance requires finding new and nontraditional resources. Samples of ore, altered, and unaltered host rock were collected from 26 iron mines and prospects in California, Nevada, and Utah to assess the potential of these deposits to host economic quantities of different critical minerals. Geochemical analyses were conducted by 61 element ICP-OES-MS sodium peroxide fusion and major elements determined by WDXRF. These deposits concentrated many critical minerals beyond what is found in average upper crustal abundances, such as Sb, As, Bi, Co, Ga, Mg, Mn, Ni, Nb, Pd, REE, Sc, Te, Sn, Ti, W, V, and Zn. However, most of these are not concentrated enough in the ore to be considered as economic resources. Those critical minerals that are enriched enough in some of these deposits to possibly be considered as by-product commodities are Ni, REE, V, and potentially Co and Ga. These enrichments were not uniform, with REE more likely to be enriched in IOA deposits, whereas Co, Ga, Ni, and V could be found enriched in either IOA or IOCG deposits.

California, Nevada, Utah↗
USGS2024

Neotectonic mapping of Puerto Rico

Puerto Rico is part of the Puerto Rico-Virgin Islands microplate, along the Caribbean–North American plate boundary between the Puerto Rico trench subduction zone and the Muertos Trough incipient subduction zone. Despite recent seismicity and geodetically constrained deformation of ~3 mm/yr of left-lateral shear across the island, Quaternary fault locations remain largely uncertain. Preservation of recent faulting in the landscape is masked by distributed faulting, high weathering rates of the tropical climate, steep topography, frequent landsliding, and extensive agriculture and urbanization along coastlines and river valleys. We present remote neotectonic mapping of historical aerial imagery from the 1930s-60s and <1-m lidar topography, integrated with field observations, to create an updated active fault map of Puerto Rico. We focus on faults that offset younger geomorphic surfaces, with ages estimated by geologic mapping, OSL and radiocarbon dating, and morphologic interpretations. We present new evidence for Quaternary activity on seven faults, including the South Lajas, Salinas, Punta Montalva, Great Southern Puerto Rico, Cerro Goden, Parguera, and San Marcos faults. We find that active faulting occurs preferentially along the southern and western coasts and does not always spatially coincide with preexisting bedrock faults, possibly reflecting partial reactivation of older faults in the modern strain field.

Puerto Rico↗
USGS2025

Probing lower-crustal fault properties with frequency-dependent tidal tremor triggering

The way seismicity responds to periodic stress perturbations offers crucial insights into the processes that can trigger an earthquake. Laboratory and theoretical analyses have shown that the period of imposed forcing and source properties affect the sensitivity to triggering, but frequency-dependent triggering of tectonic faults is poorly understood. The rate of low-frequency earthquakes (LFEs) near Parkfield, California has been found to be strongly correlated with solid earth tides. Tidal forcing acts over multiple frequencies, and the sensitivity to tidal triggering of LFEs therefore provides a unique opportunity to probe the physics of earthquake triggering and underlying fault properties. Here, we find that the response of LFEs to solid earth tides at diurnal and semi-diurnal frequencies is highly variable but spatially coherent along the San Andreas Fault. Using rate-state friction modeling, we find that the variation of the amplitude of tidal modulation is mainly affected by the spatial variation of the background effective normal stress, whereas the spatially varied tidal modulation at diurnal and semi-diurnal frequencies is mainly affected by the fault frictional property. The spatial variations of the LFE response reveal a heterogeneous lower-crustal geologic structure and complex physical faulting processes below the rupture zone of eventual great earthquakes.

California↗
USGS1998

Technique for simulating peak-flow hydrographs in Maryland

The efficient design and management of many bridges, culverts, embankments, and flood-protection structures may require the estimation of time-of-inundation and (or) storage of floodwater relating to such structures. These estimates can be made on the basis of information derived from the peak-flow hydrograph. Average peak-flow hydrographs corresponding to a peak discharge of specific recurrence interval can be simulated for drainage basins having drainage areas less than 500 square miles in Maryland, using a direct technique of known accuracy. The technique uses dimensionless hydrographs in conjunction with estimates of basin lagtime and instantaneous peak flow. Ordinary least-squares regression analysis was used to develop an equation for estimating basin lagtime in Maryland. Drainage area, main channel slope, forest cover, and impervious area were determined to be the significant explanatory variables necessary to estimate average basin lagtime at the 95-percent confidence interval. Qualitative variables included in the equation adequately correct for geographic bias across the State. The average standard error of prediction associated with the equation is approximated as plus or minus (+/-) 37.6 percent. Volume correction factors may be applied to the basin lagtime on the basis of a comparison between actual and estimated hydrograph volumes prior to hydrograph simulation. Three dimensionless hydrographs were developed and tested using data collected during 278 significant rainfall-runoff events at 81 stream-gaging stations distributed throughout Maryland and Delaware. The data represent a range of drainage area sizes and basin conditions. The technique was verified by applying it to the simulation of 20 peak-flow events and comparing actual and simulated hydrograph widths at 50 and 75 percent of the observed peak-flow levels. The events chosen are considered extreme in that the average recurrence interval of the selected peak flows is 130 years. The average standard errors of prediction were +/- 61 and +/- 56 percent at the 50 and 75 percent of peak-flow hydrograph widths, respectively.

Maryland↗
USGS2024

Earthquake-triggered ground-failure inventory associated with the M7.1 2018 Southcentral Alaska earthquake

The 30 November 2018, magnitude (Mw) 7.1 earthquake in Southcentral Alaska triggered substantial landslides, liquefaction, and ground cracking throughout the region, resulting in widespread geotechnical damage to buildings and infrastructure. Despite a challenging reconnaissance and remote-sensing environment, we constructed a detailed digital inventory of ground failure associated with the event from several sources. Sources included information derived from remotely sensed data, and data compiled from literature, social media postings, and earthquake damage information compiled by local, state, and federal agencies. Each instance of ground failure within the inventory contains information on the location and type of observed ground failure, and the methods and data used to document the occurrence. Where high-quality data, such as LIDAR or satellite imagery, were available and showed the ground-failure instance clearly, the extent is mapped as a polygon or polyline. All other locations are mapped as points. There are a total of 886 ground-failure instances documented within the inventory (400 landslides, 286 liquefaction features, and 200 features unattributed to specific processes). A semi-quantitative confidence scheme is used to describe mapping certainty associated with each ground-failure feature. This inventory represents a relatively moderate ground-failure-triggering event that occurred in a subarctic environment. This data paper describes the content within the inventory, the inventory data collection procedures, and limitations of the data. Events of this type are not often documented in detail; thus, adding the inventory data to the US Geological Survey Open Repository of Earthquake-Triggered Ground-Failure Inventories further diversifies the datasets available to the scientific community to be used to better understand and model earthquake-triggered ground failure.

Alaska↗