Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Rock Products”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70Linked to original sources
USGS1981

Map showing mineral resource potential of the Paiute Instant (Primitive) Study Area, Mohave County, Arizona

A geologic and geochemical investigation and a survey of the existing mines and prospects have been conducted to determine the mineral resource potential of the Paiute Instant (Primitive) Study Area, Mohave County, Ariz. The study area encompasses part of the Virgin Mountains and the Sullivans Canyon area. Precambrian metamorphic and igneous rocks are exposed in the core and are overlain by folded and faulted Paleozoic and Mesozoic quartzose and carbonate rocks. Mesozoic sedimentary rocks are overlain by Cenozoic volcanic and sedimentary units. The geochemical and mines and prospects survey indicates that the study area contains some mineral deposits that presently are not economically significant. Oil and gas has not been discovered in the area, and the resource potential is apparently nil or at best very low; any future oil and gas exploration would most likely be conducted outside the study area where favorable exploration localities exist. Other combustibles such as coal and oil shale are not known to occur in the study area. There is no evidence of geothermal activity or surficial radioactive mineralization. Several areas in the Paiute Instant Study Area are judged to have at best a low mineral potential. These include areas of copper, lead, manganese, molybdenum, nickel, silver, tungsten, and zinc mineralization, as well as occurrences of dumortierite, beryllium, arsenic, barium, gypsum, gem minerals, sand, gravel, and limestone. The metallic deposits and dumortieri te, beryllium, and arsenic occur over small surface areas. Significant production has not resulted from mining activity in mineralized areas. Sand, gravel, limestone, gem minerals, gypsum, and barium occurrences are far from major markets. Currently, there are no active mining operations in the study area.

Arizona↗
USGS1964

Ground water in the Sirte area, Tripolitania, United Kingdom of Libya

The present study of the ground-water conditions in the Sirte area was made during December 1961 and March-April 1962 at the request of officials of the Government of Libya. Particular attention was given to the potential of the fresh-water aquifer near Qasr Bu Itadi as a source of water for Sirte. The Sirte area lies on the southern coast of the Mediterranean Sea about 450 kilometers east-southeast of Tripoli, cocapital of Libya. Although the area receives some winter precipitation, the climate is arid. The surface rocks of the area are chiefly Miocene limestone containing marl, clay, and some sandstone, though Quaternary deposits occur along the wadis and mantle the Miocene rocks in the coastal plain. Fresh ground water occurs locally in Recent sand dunes near Zaafran and in Miocene limestone near Qasr Bu Hadi, south of a probable fault. Elsewhere in the Sirte area, ground water occurs generally in Tertiary rocks but contains 3,000 or more parts per million of dissolved solids. To establish the hydraulic characteristics of the fresh-water aquifer in the Qasr Bu Itadi area, two test wells were drilled and a controlled pumping test was made. The coefficient of transmissibility was found to be about 25,000 gallons per day per foot (13.68 cubic meters per hour per meter), and the coefficient of storage, about 0.00055. The pumping test also established the presence of two barrier-type hydraulic boundaries for the aquifer, one about 250 meters westward and another about 535 meters northward from well 9a. The first boundary is probably the small anticline on which stands the fort of Qasr Bu Itadi; the second boundary is probably a northwest trending fault. Using the transmissibility and storage coefficients derived from the pumping test, the writer concludes that (1) the total draft from the fresh-water aquifer should not exceed 13.5 cubic meters per hour and (2) production wells should be at least 3 kilometers south of well 9a.

Water Supply Paper↗
USGS1990

Textural development of clayey and quartzofeldspathic fault gouges relative to their sliding behavior

Many of the secondary fault structures developed during triaxial friction experiments have been generally correlated with the structures of natural fault zones. Therefore, any physical differences that can be found between laboratory samples that slide stably and those that show stick-slip motion may help to identify the cause of earthquakes. We have examined petrographically the run products of many triaxial friction experiments using clayey and quartzofeldspathic gouges, which comprise the principal types of natural fault gouge material. The examined samples were tested under a wide range of temperature, confining and fluid pressure, and velocity conditions. The clayey and quartzofeldspathic gouges show some textural differences, owing to their different mineral contents and grain sizes and shapes. In the clayey gouges, for example, a clay mineral fabric and kink band sets are commonly developed, whereas in the quartzofeldspathic gouges fracturing and crushing of the predominately quartz and feldspar grains are important processes. For both types of gouge, however, and whatever the pressure-temperature-velocity conditions of the experiments, the transition from stable sliding to stick-slip motion is correlated with: (i) a change from pervasive deformation of the gouge layer to localized slip in subsidiary shears; and (ii) an increase in the angle betweem the shears that crosscut the gouge layer (Riedel shears) and ones that form along the gouge-rock cylinder boundaries (boundary shears). This suggests that the localization of shear within a fault zone combined with relatively high Riedel-shear angles are somehow connected with earthquakes. Secondary fracture sets similar to Riedel shears have been identified at various scales in major strike-slip faults such as the San Andreas of the western United States (Wallace, 1973) and the Luhuo and Fuyun earthquake faults of China (Deng and Zhang, 1984; Deng et al. , 1986). The San Andreas also contains locked and creeping sections that correspond to the stick-slip and stably sliding experimental samples, respectively. We plan to study the physical structure of the San Andreas fault, to see if the experimentally observed differences related to sliding behavior can also be distinguished in the field.

Physics and Chemistry of the Earth↗
USGS1978

Reconnaissance engineering geology of the Petersburg area, southeastern Alaska, with emphasis on geologic hazards

A program to study the engineering geology of most larger Alaska coastal communities and to evaluate their earthquake and other geologic hazards was started following the 1964 Alaska earthquake; this report about the Petersburg area is a product of that program. Field-study methods were of a reconnaissance nature, and thus, interpretations in the report are tentative. Landscape of the northern end of Mitkof Island on which Petersburg is situated is characterized by a gently sloping, muskeg-covered terrain, with altitudes mostly less than 30 m. In contrast, much of the rest of the island is composed of mountainous terrain with many steep valleys. During the Pleistocene Epoch, the Petersburg area presumably was covered by ice several times; glaciers deeply eroded many valleys on Mitkof Island and adjacent areas. The last major deglaciation probably was largely completed by 12,000 years ago. Delayed rebound of the earth's crust, after the melting of large amounts of ice, permitted extensive inundation of land in the Petersburg area. Subsequently, emergence has elevated marine deposits to a present-day altitude of at least 65 m and probably to 75 m. Bedrock in the Petersburg map area is composed of relatively hard metamorphic rocks, chiefly phyllite and probably some graywacke. Rocks are of Middle(?) Jurassic to Early Cretaceous age. Five types of surficial geologic material of Quaternary age were recognized: (1) mixed deposits consisting of diamicton, silt-clay, and sand or sandy pebble gravel, (2) alluvial deposits, (3) shore and delta deposits, (4) organic deposits, and (5) artificial fill. Geologic structure in southeastern Alaska is complex because several cycles of tectonic deformation since at least early Paelozoic time have affected different parts of the region. The latest of the major tectonic events in southeastern Alaska occurred in Tertiary time, with some minor activity continuing into the Quaternary Period. Along the outer coast of southeastern Alaska, active strike-slip movement is occurring along the Chichagof-Baranof and Queen Charlotte faults. A segment of the prominent Coast-Range lineament, part of which may be a fault, lies 18 km northeast of Petersburg. Many earthquakes occur along the outer coast of southeastern Alaska. Most of these shocks are associated with movements along the Chichagof-Baranof, Queen Charlotte, and Transition faults. A few small earthquakes occur in the region between the outer coast and the southern part of the Coast Mountains. 0nly a few earthquakes have been recorded as felt at Petersburg; these shocks and others possibly felt in the Petersburg region are tabulated. Among the recorded earthquakes the highest intensity (about V-VI) as the magnitude 7.1 earthquake of October 24, 1927, that occurred probably along the Chichagof-Baranof fault, and about 225 km northwest of Petersburg; damage was reported as minor. Other large earthquakes along the Chichagof-Baranof fault that affected or probably affected the Petersburg area in a minor way occurred on August 22, 1949 (magnitude 8.1) and on July 30, 1972 (magnitude 7.25). From a consideration of the tectonics and earthquake history of the region, earthquakes similar to the 1927, 1949, and 1972 shocks are expected to recur on segments of the Chichagof-Baranof or Queen Charlotte faults. The closest of these fault segments is about 170 km southwest from Petersburg. The likelihood of destructive earthquakes being generated along faults closer to Petersburg is unknown. A very generalized discussion of possible geologic effects that could occur in the area during a postulated, theoretically reasonable worst case earthquake of magnitude 8 occurring along the outer coast about 170 km southwest from Petersburg notes that ground shaking probably would be strongest on organic deposits and least on bedrock and on firm, compact diamicton. Among other effects that could happen are: (1) liquefaction of some of the few delta and alluvial

Open-File Report↗
USGS2023

Geology, hydrology, and groundwater contamination in the vicinity of Central Chemical facility, Hagerstown, Maryland

The soil and groundwater at the Central Chemical facility, Hagerstown, Maryland, are contaminated due to the blending and production of pesticides and fertilizers during much of the 20th century. Remedial investigations focus on two operable units (OU) consisting of the surface soils and waste disposal lagoon (OU-1) and the groundwater (OU-2). The contaminants of concern (COC) for groundwater include 41 compounds categorized within the subgroups of volatile organic compounds (VOCs), semi-volatile organic compounds (SVOCs), pesticides, and metals. The purpose of this report is to provide a conceptual site model of the hydrogeology and groundwater contaminant transport at and near the Central Chemical facility. The conceptual model was developed through review, synthesis, and interpretation of the results of hydrogeologic, soil, and other environmental investigations conducted at and in the vicinity of the facility in recent decades and is intended to support plans for environmental remediation of the groundwater in OU-2. The extent and nature of the groundwater contaminant plume associated with the bedrock was characterized for OU-2 of the site. Lithologic and structural comparisons between shallow soil, weathered rock, and epikarst and deeper competent but bedded, dipping, fractured, and karstic limestones illustrate two connected flow systems—a surficial flow system consisting of the unconsolidated overburden and epikarst and a structurally dominant bedrock flow system below the epikarst. Uncertainties exist regarding the nature and transport of contaminants within the epikarst system particularly within voids and perched epikarst water tables. Karst dissolution features are observed within the site including sinkholes and dissolution voids within wells at the site. Of interest, one well in the northern part of the study area (MW-J-71) appears to have a dissolution void connected to an offsite well (OW-2-115) farther to the north. This connection is supported by groundwater level data and elevated concentrations of total suspended solids (TSS) and chlorobenzene in both wells. The high level of TSS supports the possibility of offsite transport of particle-bound contaminants within the conduit system. Episodically elevated concentrations of COC from different groups also were observed within select wells in the epikarst near the waste disposal lagoon (particularly MW-A-51). The variability observed between different COC within the same well may be the result of additional contaminated source materials unrelated to the disposal lagoon. Storage and episodic transport of contaminated material within the epikarst system has the potential to hinder remediation efforts if not considered in the remedial action.

Maryland↗
USGS2004

Natural bitumen and extra-heavy oil

Crude oil is found in sedimentary rocks throughout the world, except, thus far, in Antarctica. In many places the oil has been degraded, so that it is represented by viscous black oil that is difficult to recover, transport, and refine. Depending upon the degree of degradation the result is extra-heavy oil or, in the extreme case, natural bitumen. Except in Canada, precise quantitative reserves and oilin-place data on a reservoir basis are seldom available because most countries and companies consider such information to be proprietary. Natural bitumen is the oil contained in clastic and carbonate reservoir rocks, most frequently in small deposits at, or near, the earth’s surface. These rocks are commonly referred to as tar sands or oil sands and have been mined since antiquity for use as paving. Occasionally such deposits are extremely large in areal extent and in contained resources, most notably those in northern Alberta, Canada. In 2003 only the Alberta bitumen deposits were being exploited as a source of crude oil. Similarly, reservoirs containing extra-heavy oil are geographically widespread but only one such deposit is sufficiently large to have a major supply and economic impact. That deposit is the Orinoco Oil Belt in Eastern Venezuela. Nowhere else in the world is such a concentration of extra heavy oil known or likely to exist. Definitions of terms used in this commentary may be found immediately prior to Table 4.1. The resource definitions are those of the World Petroleum Congress-Society of Petroleum Engineers-American Association of Petroleum Geologists, with minor additions. One such addition, e.g. is the term Original Reserves, comprised of Proved Reserves plus Cumulative Production, which tends to place new and mature reservoirs on a more nearly comparable basis than either term alone

Conference Paper↗
USGS1996

Nutrient sources and analysis of nutrient water-quality data, Apalachicola-Chattahoochee-Flint River basin, Georgia, Alabama, and Florida, 1972-90

In 1991, the U.S. Geological Survey began full-scale implementation of the National Water-Quality Assessment (NAWQA) program. One of the initial tasks of the NAWQA program is to compile and evaluate existing data from individual study units. Available nutrient data from 1972 through 1990 water years were used to estimate nutrient sources to the Apalachicola–Chattahoochee–Flint (ACF) River basin and describe the presence, distribution, and transport of nutrients in surface and ground waters. In 1990, about 2,500 tons of nitrogen and 1,100 tons of phosphorus were discharged as point-source loads by 127 municipal wastewater-treatment facilities (WWTF). Nonpoint-source inputs, an unknown percentage of which entered the hydrologic system, included about 120,000 tons of nitrogen and 28,000 tons of phosphorus from animal manure; 82,000 tons of nitrogen and 20,000 tons of phosphorus applied as fertilizer; and 24,000 tons of nitrogen from atmospheric deposition. Estimates of nutrient input to the ACF River basin were not made for natural sources and for the following anthropogenic sources: industrial-wastewater effluent; storm drains; sanitary and combined sewer outflows; and runoff from agricultural, urban, and suburban areas. Nutrient outflow from the Apalachicola River into Apalachicola Bay, Fla., was about 13 percent of estimated nitrogen sources and about 3 percent of estimated total-phosphorus sources in the ACF River basin. For 1972–90, nutrient concentrations in surface water were high enough to warrant concerns about accelerated eutrophication based on total-phosphorus concentrations and to warrant concerns intermittently about toxicity to fish based on dissolved-ammonia concentrations downstream of wastewater-treatment outfalls from Metropolitan Atlanta and LaGrange, Ga. Many improvements to the water quality of the Chattahoochee and Flint Rivers in the 1980’s and early 1990’s can be directly attributed to improvements in WWTF, legislation directed at decreasing point-source loads of phosphorus, and changes in locations of wastewater-treatment outfalls. However, limited data indicate that nonpoint-source inputs increased upstream of Atlanta and in the Chipola River watershed. Significant increases in nutrient concentrations, loads, and yields occurred from upstream to downstream of the metropolitan areas of Atlanta, Ga.; Columbus, Ga., and Phenix City, Ala.; and Albany, Ga. The highest mean-annual yields estimated in the ACF River basin for total nitrogen (2.9 tons per square mile (tons/mi 2 )), total-inorganic nitrogen (2.0 tons/mi 2 ), dissolved ammonia (1.1 tons/mi 2 ), and total phosphorus (0.75 tons/mi 2 ) were downstream of Atlanta. Most significant trends in nutrient-concentration data from 1980–90 in the Chattahoochee River and the Middle and Lower Flint River basins were increasing, except dissolved ammonia which decreased at several sampling sites in reaches downstream of Atlanta, Columbus and Phenix City, and Albany. At sampling sites on the Chattahoochee and Flint Rivers downstream of Atlanta and Albany, decreasing trends in dissolved-ammonia concentration and increasing trends in dissolved-nitrate concentration were the result of improved wastewater treatment at WWTF. Dissolved-ammonia concentrations decreased and dissolved-nitrate concentrations increased along river reaches downstream of wastewater-treatment facility outfalls for Atlanta and Albany because of nitrification of ammonia to nitrate. Increasing trends in total-phosphorus concentrations are an accurate representation of data for the period 1980–90. However, legislated restrictions on the use of phosphate detergents and improvements to WWTF in the late 1980’s and early 1990’s, resulted in substantial reductions of phosphorus concentrations in wastewater effluent and in rivers at many locations in the 1990’s. Reservoirs affect nutrient transport because of uptake by phytoplankton and aquatic plants, denitrification,and accumulation of phosphorus associated with sediment in reservoirs. Yields of total-inorganic nitrogen, dissolved ammonia, dissolved nitrate, and total phosphorus decreased between sampling sites upstream and downstream of four reservoirs on the Chattahoochee River. The only exception was the yield of dissolved ammonia increased slightly from upstream to downstream of Lake Sidney Lanier. Much of the nutrient load in the Chattahoochee River downstream of Atlanta is utilized by algae or settles out primarily in West Point Lake, and to a lesser extent, in Lake Harding and Walter F. George Reservoir. In general, the Flint River arm of Lake Seminole had significantly higher concentrations of nutrients than the Chattahoochee River arm of Lake Seminole, which may be the result of the large percentage of the Middle and Lower Chattahoochee River in backwater from reservoirs, the absence of reservoirs on the Flint River downstream of Albany until Lake Seminole, and nonpoint-source inputs of nutrients from intensively farmed areas in the Lower Flint River basin. Decreases in dissolved-ammonia, dissolved-nitrate, and total-phosphorus concentrations in reservoirs and backwater along the Chattahoochee River from West Point Lake to Lake Seminole during summer months are related to the seasonality of phytoplankton production. The Chipola River had the highest yields of dissolved nitrate (1.2 tons/mi 2 ) estimated in the ACF River basin. Estimated loads of dissolved nitrate increased fairly steadily from 500 to 1,500 tons per year from 1972–90. These factors strongly suggest an agricultural nonpoint source of elevated dissolved-nitrate concentrations from increased irrigated agriculture and fertilizer applications in the Chipola River watershed. Analyses of nutrients in ground water within the ACF River basin for 1972–90 water years were restricted because of limited available data. The distribution of nitrate concentrations in the ACF River basin for 1972–90 water years included 10 percent of wells and 6 percent of springs with concentrations that probably have elevated nitrate concentrations (3.1 to 10 milligrams per liter (mg/L)), and 1 percent of wells with median nitrate concentrations exceeding the maximum contaminant level of 10 mg/L. Dissolved-nitrate concentrations were significantly lower in the Providence aquifer than in the Floridan aquifer system and the crystalline-rock aquifers. Dissolved-nitrate concentrations in wells used for public supply were significantly lower than in wells used for domestic use or unused wells.

Alabama, Florida, Georgia↗
USGS2017

Platinum-group elements

The platinum-group elements (PGEs)—platinum, palladium, rhodium, ruthenium, iridium, and osmium—are metals that have similar physical and chemical properties and tend to occur together in nature. PGEs are indispensable to many industrial applications but are mined in only a few places. The availability and accessibility of PGEs could be disrupted by economic, environmental, political, and social events. The United States net import reliance as a percentage of apparent consumption is about 90 percent. PGEs have many industrial applications. They are used in catalytic converters to reduce carbon monoxide, hydrocarbon, and nitrous oxide emissions in automobile exhaust. The chemical industry requires platinum or platinum-rhodium alloys to manufacture nitric oxide, which is the raw material used to manufacture explosives, fertilizers, and nitric acid. In the petrochemical industry, platinum-supported catalysts are needed to refine crude oil and to produce aromatic compounds and high-octane gasoline. Alloys of PGEs are exceptionally hard and durable, making them the best known coating for industrial crucibles used in the manufacture of chemicals and synthetic materials. PGEs are used by the glass manufacturing industry in the production of fiberglass and flat-panel and liquid crystal displays. In the electronics industry, PGEs are used in computer hard disks, hybridized integrated circuits, and multilayer ceramic capacitors. Aside from their industrial applications, PGEs are used in such other fields as health, consumer goods, and finance. Platinum, for example, is used in medical implants, such as pacemakers, and PGEs are used in cancer-fighting drugs. Platinum alloys are an ideal choice for jewelry because of their white color, strength, and resistance to tarnish. Platinum, palladium, and rhodium in the form of coins and bars are also used as investment commodities, and various financial instruments based on the value of these PGEs are traded on major exchanges. PGEs are among the rarest metals; Earth’s upper crust contains only about 0.0005 part per million (ppm) platinum. Today, the average grade of PGEs in ores that are mined primarily for their PGE concentrations varies from 5 to 15 ppm, although the concentration of PGEs in hand-picked ore specimens may range from tens to hundreds of parts per million. More than 100 different minerals have one of the PGEs as an essential component. PGE minerals occur as native metals. They also occur as compounds with other transition metals (copper, iron, mercury, nickel, and silver), post-transition metals (bismuth, lead, and tin), metalloids (antimony, arsenic, and tellurium), and nonmetals (selenium and sulfur). From 1900 to 2011, approximately 14,200 metric tons of PGEs was produced, and roughly 95 percent of that production (13,500 metric tons) took place between 1960 and 2011. The breakdown of production by country shows that, since 1900, about 90 percent of the production came from South Africa and Russia. The secondary supply of platinum, palladium, and rhodium is obtained through the recycling of catalytic converters from end-of-life vehicles, jewelry, and electronic equipment. Recycled platinum, palladium, and rhodium provide a significant proportion of the world’s total supply; these secondary sources are sufficient to close the gap between world mine production and consumption. Exploration and mining companies report resources of about 104,000 metric tons of PGEs (including minor amounts of gold) in mineral deposits around the world that could be developed. For PGEs, almost all the reported production and identified resources are associated with deposits in three geologic features—the Bushveld Complex, which is a layered mafic-to-ultramafic intrusion in South Africa; the Great Dyke, which is a layered mafic-to-ultramafic intrusion in Zimbabwe; and sill-like intrusions associated with flood basalts in the Noril’sk-Talnakh area of Russia. The metallic forms of PGEs are generally considered to be inert. PGEs pose a risk to human health only in cases where individuals are occupationally exposed to synthetic PGE compounds, especially workers in precious-metal refineries. In the natural environment, background PGE concentrations are low in water, sediment, soil, and plants. Anthropogenic sources of PGEs in the environment include catalytic converters used in modern automobiles, platinum-based chemotherapy drugs, and smelter emissions. The abundance of sulfide minerals defines the environmental and geologic characteristics of PGE-enriched magmatic sulfide deposits; those deposits with the highest amount of sulfide minerals could have the highest environmental impact. Acid rock drainage from reef-type and contact-type deposits is unlikely because the ores and their host rocks contain low proportions of sulfide minerals. For some conduit-type orebodies with massive ores, mineral-processing techniques separate and produce concentrates of copper-, iron-, and nickel-bearing sulfide minerals; those with copper and nickel are processed to extract metal, but the iron-sulfide minerals, mainly pyrrhotite, are discarded as waste. This results in waste material with a high acid-generating potential. The most significant primary source of PGEs in the United States is a deposit in the Stillwater Complex, which is a layered igneous intrusion in Montana. Approximately 305 metric tons of platinum and palladium have been mined from the Stillwater Complex deposit since 1986. Exploration and development drilling indicate that another 2,200 metric tons are present. Mining has progressed to depths of 1,800 meters below the surface, but the bottom of the ore deposit has not been reached; geologic estimates suggest that another 1,000 to 6,200 metric tons of PGEs could be present at depth. In the future, PGEs may be mined from deposits found near the base of the Duluth Complex, which is a group of igneous intrusions in Minnesota.

Professional Paper↗
USGS2000

Environmental setting and its relations to water quality in the Kanawha River basin

The Kanawha River and its major tributary, the New River, drain 12,233 mi2 in West Virginia, Virginia, and North Carolina. Altitude ranges from about 550 ft to more than 4,700 ft. The Kanawha River Basin is mountainous, and includes parts of three physiographic provinces, the Blue Ridge (17 percent), Valley and Ridge (23 percent), and Appalachian Plateaus (60 percent). In the Appalachian Plateaus Province, little of the land is flat, and most of the flat land is in the flood plains and terraces of streams; this has caused most development in this part of the basin to be near streams. The Blue Ridge Province is composed of crystalline rocks, and the Valley and Ridge and Appalachian Plateaus Provinces contain both carbonate and clastic rocks. Annual precipitation ranges from about 36 in. to more than 60 in., and is orographically affected, both locally and regionally. Average annual air temperature ranges from about 43ºF to about 55ºF, and varies with altitude but not physiographic province. Precipitation is greatest in the summer and least in the winter, and has the least seasonal variation in the Blue Ridge Province. In 1990, the population of the basin was about 870,000, of whom about 25 percent lived in the Charleston, W. Va. metropolitan area. About 75 million tons of coal were mined in the Kanawha River Basin in 1998. This figure represents about 45 percent of the coal mined in West Virginia, and about seven percent of the coal mined in the United States. Dominant forest types in the basin are Northern Hardwood, Oak-Pine, and Mixed Mesophytic. Agricultural land use is more common in the Valley and Ridge and Blue Ridge Provinces than in the Appalachian Plateaus Province. Cattle are the principal agricultural products of the basin. Streams in the Blue Ridge Province and Allegheny Highlands have the most runoff in the basin, and streams in the Valley and Ridge Province and the southwestern Appalachian Plateaus have the least runoff. Streamflow is greatest in the spring and least in the autumn. About 61 percent of the basin's population use surface water from public supply for their domestic needs; about 30 percent use self-supplied ground water, and about nine percent use ground water from public supply. In 1995, total withdrawal of water in the basin was about 1,130 Mgal/d. Total consumptive use was about 118 Mgal/d. Surface water in the Blue Ridge Province is usually dilute (less than 100 mg/L dissolved solids) and well aerated. Dissolved- solids concentrations in streams of the Valley and Ridge Province at low flow are typically greater (150-180 mg/L) than those in the Blue Ridge Province. The Appalachian Plateaus Province contains streams with the most dilute (less than 30 mg/L dissolved solids) and least dilute (more than 500 mg/L dissolved solids) water in the basin. Coal mining has degraded more miles of streams in the basin than any other land use. Streams that receive coal-mine drainage may be affected by sedimentation, and typically contain high concentrations of sulfate, iron, and manganese. Other major water-quality issues include inadequate domestic sewage treatment, present and historic disposal of industrial wastes, and logging, which results in the addition of sediment, nutrients, and other constituents to the water. One hundred eighteen fish species are reported from the Kanawha River system downstream from Kanawha Falls. Of these, 15 are listed as possible, probable, or known introductions. None of these fish species is endemic to the Kanawha River Basin. The New River system has only 46 native fishes, the lowest ratio of native fishes to drainage area of any river system in the eastern United States, and the second-highest proportion of endemic fish species (eight of 46) of any river system in the eastern United States.

North Carolina, Virginia, West Virginia↗
USGS2006

Metallogeny of the Great Basin: Crustal evolution, fluid flow, and ore deposits

The Great Basin physiographic province in the Western United States contains a diverse assortment of world-class ore deposits. It currently (2006) is the world’s second leading producer of gold, contains large silver and base metal (Cu, Zn, Pb, Mo, W) deposits, a variety of other important metallic (Fe, Ni, Be, REE’s, Hg, PGE) and industrial mineral (diatomite, barite, perlite, kaolinite, gallium) resources, as well as petroleum and geothermal energy resources. Ore deposits are most numerous and largest in size in linear mineral belts with complex geology. U.S. Geological Survey (USGS) scientists are in the final year of a research project initiated in the fall of 2001 to increase understanding of relations between crustal evolution, fluid flow, and ore deposits in the Great Basin. Because of its substantial past and current mineral production, this region has been the focus of numerous investigations over the past century and is the site of ongoing research by industry, academia, and state agencies. A variety of geoinformatic tools was used to organize, reinterpret, and display, in space and time, the large amounts of geologic, geophysical, geochemical, and hydrologic information deemed pertinent to this problem. This information, in combination with concentrated research on (1) critical aspects of the geologic history, (2) an area in northern Nevada that encompasses the major mineral belts, and (3) important mining districts and deposits, is producing new insights about the interplay between key tectonic events, hydrothermal fluid flow, and ore genesis in mineral belts. The results suggest that the Archean to Holocene history of the Great Basin was punctuated by several tectonic events that caused fluids of different origins (sea water, basinal brine, meteoric water, metamorphic water, magmatic water) to move through the crust. Basement faults reactivated during these events localized deformation, sedimentation, magmatism, and hydrothermal fluid flow in overlying rocks to form mineral belts that contain ore deposits of different types and ages that are locally superimposed (demonstrating inheritance). Fluid flow in these systems also was influenced by the distribution of permeable lithologies and paleotopographic highs and lows. Hydrothermal fluids evolved from their initial chemistries towards compositions that reflect the ƒ O 2 and ƒ S 2 buffering capacity of, and the ligands and metals present in, the rocks (±older mineralization) through which they moved. In northern Nevada, where gold deposits are relatively common, carbonaceous, pyritic strata buffered fluids of diverse origins to H 2 S-rich compositions so they could transport gold repeatedly over Paleozoic-Cenozoic time (convergent evolution). Ore formed where metal-laden fluids encountered effective physicochemical traps. Maps of Neogene basin fill and erosion surfaces identify areas where preexisting ore deposits have been progressively exposed or concealed. Comparisons with analogous terrains and deposit types in other parts of the world provide global context. The initial findings and some of the databases, geologic maps, sections, reconstructions, hydrogeologic models, topical syntheses, regional overviews, short courses, field guides, and deposit comparisons produced by project staff and associated managers, contractors, and collaborators have been presented in numerous abstracts, symposia, USGS publications, and professional journals over the last 5 years (see the extensive bibliography). Notable among these was the 2005 Geological Society of Nevada symposium in Reno, Nevada, and the 2005 Geological Society of America annual meeting in Salt Lake City, Utah, where project results were presented to audiences from around the nation and world. The final results of the project will be submitted for publication in 2007 to appropriate USGS and professional journals. A special issue of GEOSPHERE, scheduled for publication in 2007, will be devoted to the results of this project and related work. This special issue will reach an international audience and be available worldwide on the internet. Much of the research for this project has concentrated on areas that will receive the focused attention of the mining industry in the future. As such, the data and interpretations generated by this project have direct use for land-use managers in Federal, State, and local agencies. Improved hydrogeologic models developed by this project will considerably enhance ongoing and future water resource investigations in the region. The increased understanding of when, where, and how hydrothermal systems produce significant economic deposits has direct uses for mineral exploration and for future USGS mineral resource assessments in the Great Basin and other parts of the world.

Great Basin↗
USGS2010

Detailed Sections from Auger Holes in the Emporia 1:100,000-Scale Quadrangle, North Carolina and Virginia

The Emporia 1:100,000-scale quadrangle straddles the Tidewater Fall Line in southern Virginia and includes a small part of northernmost North Carolina. Sediments of the coastal plain underlie the eastern three-fifths of this area. These sediments onlap crystalline basement rocks toward the west and dip gently to the east, reaching a maximum known thickness of 821 feet in the extreme southeastern part of the map area. The gentle eastward dip is disrupted in several areas due to faulting delineated during the course of mapping. In order to produce a new geologic map of the Emporia 1:100,000-scale quadrangle, the U.S. Geological Survey drilled one corehole to a depth of 223 feet and augered 192 shallow research test holes (maximum depth 135 feet) to supplement sparse outcrop data available from the coastal plain part of the map area. The recovered sediments were studied and data from them recorded to determine the lithologic characteristics, spatial distribution, and temporal framework of the represented coastal plain stratigraphic units. These test holes were critical for accurately determining the distribution of major geologic units and the position of unit boundaries that will be shown on the forthcoming Emporia geologic map, but much of the detailed subsurface data cannot be shown readily through this map product. Therefore, the locations and detailed descriptions of the auger test holes and one corehole are provided in this open-file report for geologists, hydrologists, engineers, and community planners in need of a detailed shallow-subsurface stratigraphic framework for much of the Emporia map region.

Open-File Report↗
USGS2025

Preliminary field report of landslide hazards following Hurricane Helene

Executive Summary This report reflects our knowledge regarding the widespread landslide activity associated with Hurricane Helene observed during the U.S. Geological Survey’s (USGS) mission assignment to North Carolina in October 2024. The material in this report was originally prepared for the Federal Emergency Management Agency under mission assignment DR-4827-NC. The data and commentary in this report are reflective of a report provided to the Federal Emergency Management Agency (FEMA) on October 18, 2024, as well as information provided in briefings at the Buncombe County Emergency Operations Center. The report has been modified for public dissemination. This assessment was based on systematic visual examination and mapping of landslide locations from aerial and satellite imagery, visual and photographic observations from low-level helicopter overflights and conversations with local landslide experts from the North Carolina Geological Survey and Appalachian Landslide Consultants PLLC, and more than 50 years of combined landslide hazard professional experience of the mission-assigned field team. No systematic field investigations were done by the USGS. While responding to the event, the USGS did not identify any landslides that posed an immediate major threat to recovery personnel in parts of nine counties in North Carolina (Avery, Buncombe, Henderson, McDowell, Mitchell, Polk, Rutherford, Watauga, and Yancey); however, threats from renewed landslide activity may remain heightened in localized areas for months or even years. Known areas of the most abundant landslide occurrence include Bat Cave, Lake Lure, Chimney Rock, Swannanoa, Black Mountain, Fairview, steep areas in Asheville, and the Blue Ridge Parkway. The USGS shared detailed locations of known landslides with the Emergency Operations Centers. The thousands of landslide scars on hillsides and landslide deposits on flatter ground may present some threat to recovery activities. Soil and rocks will continue to erode from newly exposed landslide scars and may pose a threat to people and infrastructure who are immediately nearby. In general, the steeper and taller the landslide scar, the greater the potential threat. This threat is heightened during periods of rainfall and increases with the duration and intensity of rainstorms. Very heavy rainfall, or repeated rainfall events during short periods, could also initiate new landslides on steep slopes. Excavation of landslide deposits, particularly excavation of those deposits directly adjacent to steep slopes, may also pose a threat to nearby people and equipment. An interagency collaborative mapping effort led by the USGS that informed this assessment identified 1,155 landslide locations by the October 2024 briefings, but that number increased to 2,217 in a final reviewed version of the locations published in January 2025. Locations were mapped from satellite imagery, fixed-wing and helicopter surveys, media and social media, and field reports in the 3 weeks following the passage of the remnants of Hurricane Helene. USGS products outlined in this report are publicly available and include geotagged photographs from aerial reconnaissance, hazard models, an interactive view of mapped landslide locations, and landslide safety and education resources.

North Carolina, South Carolina, Tennessee, Virgini↗
USGS2007

Time scales and volumes of large ignimbrite-caldera eruptions in continental arc: Relation to assembly of subvolcanic batholiths

Volcanoes and upper-crustal plutons in diverse geologic settings tend to share common features of mineral and chemical compositions, emplacement age, and magmatic volume. Voluminous silicic ignimbrites associated with caldera sources, widespread components of Cordilleran arcs, have commonly been interpreted as broadly concurrent with assembly of upper-crustal batholiths. Tertiary ignimbrites in the westerns USA and elsewhere, with volumes to 1-5x10 3 km 3 , record multi-stage histories of magma accumulation, fractionation, and solidification in upper parts of large subvolcanic plutons that were sufficiently liquid to erupt. Indiviudal calderas, to 75 km across with 2-5 km subsidence, are direct evidence for shallow magma bodies comparable to the largest granitic plutons. Nested polycyclic calderas that erupted compositionally diverse tuffs, some with reposed intervals of 100 ka or less, document deep composite subsidence and rapid evolution in subvolcanic magmas. Most ignimbrite compositions are more evolved than associated plutons, requiring that subcaldera chambers retained voluminous residua from fractionation. Geophysical data that shows that low-density upper-crustal rocks, inferred to be plutons, are 10km or more thick beneath many calderas. Alternatively, some recent field and geochronologic studies have been interpreted as indicating that individual Mesozoic Cordilleran plutons grew and solidified incrementally in small batches during > 10 6- year intervals, without presence of voluminous eruptible magma ("large tank") at any stage during pluton growth and batholith assembly. Such growth in plutons in small increments would minimize close associations with large ignimbrite calderas and suggest that batholith growth is largely unrelated to surface volcanism. Linked to these interpretations are inferences that ignimbrite eruptions record ephemeral magma chambers that (1) grow rapidly due to exceptionally high magmatic power input to the upper crust, (2) evacuate nearly completely during ignimbrite eruption, and (3) leave little geologic record in the form of crystallized crustal plutons. How to reconcile these alternatives? Many large continental arcs record a broadly unified time-space-composition evolution of upper-crustal magmatic systems. Such volcanic fields especially those containing ignimbrite-caldera episodes, commonly contain compositionally diverse eruptive products erupted over multimillion-year intervals. A common pattern is initial eruptions of intermediate-composition lavas from central volcanoes, followed by eruption of one or more large-volume ignimbrites of more silicic composition; concurrent caldera subsidence is located centrally within the are of prior lava vents. Such progressions of surface volcanism can be interpreted as providing instantaneous sequential snapshots of changing magma-chamber process through time. In contrast, subvolcanic plutons exposed in eroded volcanic terranes represent time-integrated and partly homogenized end products, as successive magmatic pulses accumulated, fractionated, and consolidated in the upper crust. Such perspectives combine evidence for prolonged growth and incremental pluton assembly with presence of large-volume eruptible chambers during peak magmatic input.

Colorado↗
USGS2020

Flea parasitism and host survival in a plague-relevant system: Theoretical and conservation implications

Plague is a bacterial zoonosis of mammalian hosts and flea vectors. The disease is capable of ravaging rodent populations and transforming ecosystems. Because plague mortality is likely to be predicted by flea parasitism, it is critical to understand vector dynamics. It has been hypothesized that paltry precipitation and reduced vegetative production predispose herbivorous rodents to malnourishment and flea parasitism, and flea parasitism varies directly with plague mortality. We evaluated these hypotheses on five colonies of Utah prairie dogs (UPDs; Cynomys parvidens ), on the Awapa Plateau, Utah, US, in 2013–16. Ten flea species were identified among 3,257 fleas from UPDs. These 10 flea species parasitize prairie dogs, mice, rats, voles, ground squirrels, chipmunks, and marmots, all known hosts of plague. The abundance of fleas on individual UPDs (1,198 observations) varied inversely with UPD body condition; fleas were most abundant on lightweight, malnourished UPDs. Flea abundance on UPDs was highest in dry years that were preceded by wet years. Increased precipitation and soil moisture in the prior year might generate humid microclimates in UPD burrows (that could facilitate flea survival and reproduction) and paltry precipitation in the current year could predispose UPDs to malnourishment and flea parasitism. Annual re-encounter rates for UPDs (1,072 observations) were reduced in wetter years preceded by drier years; reduced precipitation and vegetative production might kill UPDs, and increased flea densities in drier years could provide conditions for plague transmission (and UPD mortality) when moisture returns. Re-encounter rates were reduced for UPDs carrying at least one flea compared to UPDs with no detected fleas. These results support the hypothesis that reduced precipitation in the current year predisposes UPDs to flea parasitism. Our results also suggest a link between flea parasitism and UPD mortality. Given documented connections between flea parasitism and plague transmission, our results point toward an effect of flea parasitism on plague-related deaths for individual UPDs, a phenomenon rarely investigated in nature.

Utah↗
USGS1969

Mesozoic California and the underflow of Pacific mantle

The Mesozoic evolution of California is interpreted as dominated by the underflow of oceanic mantle beneath the continental margin. Underflow during part of Late Cretaceous time of more than 2000 km of the eastern Pacific plate seems required by the marine magnetic data. Correspondingly, varied oceanic environments—abyssal hill, island arc, trench, oceanic crust, and upper mantle, perhaps also continental rise and abyssal plain—appear to be represented in the eugeosynclinal terranes of California. The rock juxtapositions accord with the concept that these materials were scraped off against the continent as the oceanic plate slid beneath it along Mesozoic Benioff seismic zones, which are now seen as serpentine belts separating profoundly different rock assemblages. The chaotic Franciscan Formation of coastal California consists of deep-ocean Late Jurassic to Late Cretaceous sedimentary, volcanic, crustal, and mantle materials. As open-ocean abyssal oozes and the oceanic crust beneath them were swept into the Benioff-zone trench at the continental margin, they were covered by terrigenous clastic sediments, and the entire complex was carried beneath the correlative continental-shelf and continental-slope deposits (Great Valley sequence) and the older Mesozoic complexes. The other eugeosynclinal terranes of California can be interpreted, albeit with less confidence, in similar terms of underflow of Pacific mantle. In the Klamath Mountains and northern Sierra Nevada, for example, Ordovician and Silurian ocean-floor materials, overlain by or juxtaposed against an Upper Silurian to Permian island arc, were swept in first to the continent, along with a large fragment of oceanic crust and mantle and another fragment of an old orogenic belt. This debris was followed by Permian and Triassic ocean-floor deposits. Late Triassic and Jurassic volcanic products from stocks and batholiths forming in the welded complexes lapped across both landward and oceanward sides of the region. Reversal of Cenozoic extension, strike-slip faulting, and volcanic crustal growth in the western United States reveals a Cretaceous tectonic pattern strikingly like the modern pattern of the Andes, so the paleotectonic setting of North America can be inferred from the South American present. The Mesozoic batholiths of North America, like the late Cenozoic volcanic belt of the central Andes, are products of the same rapid motion of oceanic plates that carried oceanic sediments against the continent to form eugeosynclinal terranes. Magmas generated in the Benioff zones formed the batholiths and the volcanic fields which initially capped them.

California↗
USGS1996

Gas in the Uinta Basin, Utah - Resources in continuous accumulations

Continuous-type gas plays can be envisioned as large areas within which the reservoir rock is everywhere charged with gas. As part of its 1995 National Assessment of oil and gas resources, the U.S. Geological Survey identified four continuous-type gas plays in the Uinta Basin. These occur in sandstone reservoirs of the lower Tertiary Wasatch Formation (two plays) and the underlying Upper Cretaceous Mesaverde Group (two plays). Only the play representing the eastern part of the Wasatch Formation continuous accumulation (Natural Buttes area) has been the target of appreciable drilling activity to date. The volume of undiscovered gas estimated to be recoverable from these four plays using existing technology and development practices ranges between 3.7 trillion cubic feet of gas (TCFG) (95th fractile) and 11.9 TCFG (5th fractile), and averages 7.0 TCFG. However, these are geologically based resource estimates, made without direct reference to economic viability. Economic analysis indicates that only a fraction of this assessed resource could be economically found and produced at prices less than $2.00 per thousand cubic feet of gas (MCFG), based on costs that prevailed at the beginning of 1993. Production characteristics of continuous-type gas plays vary significantly from well to well. Difficulty in identifying locations with poor production characteristics in advance of drilling contributes to the unfavorable economics of some plays. The need exists for improvements in technology and geologic understanding that increase the chances of selectively drilling the more productive locations within a continuous-type play.

Mountain Geologist↗
USGS2022

Data-driven prospectivity modelling of sediment-hosted Zn-Pb mineral systems and their critical raw materials

Demand for critical raw materials is expected to accelerate over the next few decades due to continued population growth and the shifting consumption patterns of the global economy. Sedimentary basins are important sources for critical raw materials and new discoveries of sediment–hosted Mississippi Valley–type (MVT) and/or clastic–dominated (CD) Zn–Pb deposits are likely required to mitigate future supply chain disruptions for Zn, Pb, Ag, Cd, Ga, Ge, Sb, and In. Herein we integrate public geoscience datasets using a discrete global grid to system to model the mineral potential for MVT and CD deposits across Canada, the United States of America, and Australia. Statistical analysis of the model results demonstrates that surface–wave tomography and derivative products from satellite gravity datasets can be used to map the most favourable paleo–tectonic settings of MVT and CD deposits inboard of orogenic belts and at the rifted edges of cratonic lithosphere, respectively. Basin development at pre–existing crustal boundaries was likely important for maintaining the low geothermal–gradients that are favourable for metal transport and generating the crustal fluid pathways that were reactivated during ore–formation, as suggested by the statistical association of both sediment–hosted mineral deposit types with the edges of upward–continued gravity and long–wavelength magnetic anomalies. Multivariate statistical analysis demonstrates that the most prospective combination of these geophysical datasets varies for each geological region and deposit type. We further demonstrate that maximum and minimum geological ages, coupled with Phanerozoic paleogeographic reconstructions, represent mappable proxies for the availability of oxidized, brine–generating regions that are the most likely source of ore–forming fluids (e.g., low– to mid–latitude carbonate platforms and evaporites). Ore deposition was likely controlled by interaction between oxidized, low–temperature brines and sulfidic and/or carbonaceous rocks, which, in some cases, can be mapped at the exposed surface or identified using the available rock descriptions. Baseline weights–of–evidence models are based on regional geophysics and are the least impacted by missing surface information but yield relatively poor results, as demonstrated by the low area–under–the–curve (AUC) for the spatially independent test set on the success–rate plot (AUC = 0.787 for MVT and AUC = 0.870 for CD). Model performance can be improved by: (1) using advanced methods that were trained and validated during a series of semi–automated machine learning competitions; and/or (2) incorporating geological and geophysical datasets that are proxies for each component of the mineral system. The best–performing gradient boosting machine models yield higher AUC for the test set (AUC = 0.983 for MVT and AUC = 0.991 for CD) and reduce the search space by >94%. The model results highlight the potential benefits of mapping sediment–hosted mineral systems at continental scale to improve mineral exploration targeting for critical raw materials.

Ore Geology Reviews↗
USGS1968

Minor epigenetic, diagenetic, and syngenetic sulfide, fluorite, and barite occurrences in the central United States

Metallic sulfides, fluorite , barite , and celestite are widespread in the sedimentary rocks of the central United States . Many occurrences are epigenetic concentrations either in known major mineral districts or in clusters of deposits that warrant further exploration for potential ore. Evaluation of trace-element composition, of fluid inclusions, of depositional temperature, and of isotopic composition of sulfur may help discriminate potentially economic deposits from even more widespread, probably noneconomic, syngeneic occurrences . Known major mineral districts and many promising sulfide occurrences are located along complex major fault systems and particularly over structural domes at intersections of fault systems. Economically promising sulfide deposits occur along a west-trending fault system crossing Kentucky and Missouri near the 38th parallel, particularly at associated cryptoexplosion structures along it, at the intersection of the fault system with the Cincinnati arch. Elsewhere in the central United States , promising sulfide occurrences are located along the crest of the Findlay arch, near Serpent Mound, Ohio, along the northwest-trending Mount Carmel fault in southwestern Indiana, and buried at depth in oil fields of west- central Kansas.Other types of deposits that are productive or may have some future economic interest are locally economic and possibly syngenetic red-bed copper occurrences in Oklahoma, Texas, Kansas, and Pennsylvania. Most widespread are the black shale and pyritic sandstone beds, some of which have been a source of pyrite for sulfur and sulfuric acid in conjunction with coal mining. Bedded barite deposits of possibly diagenetic origin have been mined in Arkansas. Diagenetic siderite concretions containing sulfides and barite were widespread sources of iron in the 19th century.

Economic Geology↗