Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Hydrologic Unit”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70Linked to original sources
USGS2002

Geohydrology of Southeastern Pennsylvania

Rapid population growth in southeastern Pennsylvania has increased the demand for ground water. In an effort to address the increased ground-water needs, a ground-water investigation in a 5,200-square-mile area of southeastern Pennsylvania was initiated. Information on the geohydrologic system of the area and the water-bearing capabilities of 51 geohydrologic units in six physiographic provinces or sections (Coastal Plain, Piedmont Upland, Piedmont Lowland, Gettysburg-Newark Lowland, South Mountain, and Reading Prong) has been summarized. Also included are statistical summaries by geohydrologic unit for well construction and discharge data (according to water use), as well as inorganic and radiochemical ground-water-quality data. Characteristics of the ground-water-flow system in the study area, as well as aquifer hydrologic properties, are related to geology, but can be modified by human development. Ground-water flow in the Coastal Plain Physiographic Province, is through intergranular or primary openings under either unconfined or confined aquifer conditions. Historically, ground-water flowed toward the Delaware and Schuylkill Rivers, but the original flow paths and water quality have been altered significantly by urbanization. In igneous and metamorphic rocks (Piedmont Upland, South Mountain, and Reading Prong), ground-water flows through a network of interconnected secondary openings (fractures, joints, cleavage planes). Ground water in the carbonate rocks (Piedmont Lowland) also flows through a network of secondary openings, but these openings have been enlarged by solution. In the Triassic sedimentary rocks (Gettysburg-Newark Lowland), thin tabular aquifers are separated by much thicker, strata-bound aquitards. The fractured Triassic bedrock forms a very complex, anisotropic, and heterogeneous aquifer with horizontal permeability much greater than vertical permeability. In general, ground-water flow in southeastern Pennsylvania takes place within local flow systems that discharge within days or weeks to adjacent stream valleys or surface-water bodies. Intermediate (South Mountain) and regional (Gettysburg-Newark Lowland) scale systems, however, in which residence times have been measured in months or years discharge to major streams or rivers that are located in different physiographic provinces or sections or tens of miles distant. Well depths, casing lengths, reported yields, and specific capacities can vary significantly by geohydrologic unit, use of well, and topographic setting. Wells drilled in the Weverton and Loudon Formations, undivided, and the Montalto Quartzite Member (South Mountain) have median well and casing lengths of 374 and 130 feet, respectively, significantly greater than in almost every other geohydrologic unit in the study area. Wells drilled in the Peach Bottom Slate and Cardiff Conglomerate, undivided (Piedmont Upland) are typically shallow, with a median well depth of 90 feet. Wells in the Marburg Schist (Piedmont Upland) have the lowest median casing length—5.5 feet. Wells in the Stonehenge Formation (Piedmont Lowland), the most productive unit in the study area, have a median reported yield of 200 gallons per minute and a median specific capacity of 27 gallons per minute per foot. The Cocalico Formation (Piedmont Lowland) is the least productive unit with a median reported well yield of 2.5 gallons per minute and a median specific capacity of 0.01 gallons per minute per foot. In general, high-demand wells are significantly deeper, use significantly more casing, and have significantly greater yields than domestic wells drilled in the same unit. Commonly, wells drilled in valleys will have greater reported yields and specific capacities than wells drilled in the same unit on slopes or hilltops. Except where adversely affected by human activities, the quality of ground water in southeastern Pennsylvania is suitable for most purposes. Yet several water-quality criteria are exceeded in many wells throughout the area. Water from 51 percent of 2,075 wells sampled had a pH higher or lower than the range specified in the U.S. Environmental Protection Agency (USEPA) secondary maximum contaminant level (SMCL). Of water samples analyzed, about 1 percent of 1,623 wells contained concentrations of chloride and 27 percent of 1,624 wells sampled contained concentrations of iron that exceeded the USEPA SMCL. Twenty-seven percent of 1,397 wells sampled contained water with manganese concentrations greater than the USEPA SMCL. Sulfate concentrations in the water of 3 percent of 1,699 wells sampled and total dissolved solids in the water from 10 percent of 1,590 wells sampled exceeded the USEPA SMCL. Concentrations of cadmium, chromium, cyanide, mercury, nickel, radium-226, selenium, and zinc in the water exceeded the USEPA maximum contaminant level (MCL) in less than 5 percent of the 183 to 620 wells sampled. Nine percent of 625 wells sampled contained water with lead concentrations that exceeded the USEPA MCL. Radon concentrations in the water of 92 percent of the 285 wells sampled exceeded the proposed USEPA MCL. Radium-228 in the water of 10 percent of the 240 wells sampled and nitrate in the water of 13 percent of 1,413 wells sampled exceeded the USEPA MCL. Gross-alpha activity in the water was measured only in the Chickies and Harpers Formations of the Piedmont Upland, with 23 percent of the 168 wells sampled exceeding the USEPA MCL.

Water-Resources Investigations Report↗
USGS2020

Simulation of groundwater flow in the regional aquifer system on Long Island, New York, for pumping and recharge conditions in 2005–15

A three-dimensional groundwater-flow model was developed for the aquifer system of Long Island, New York, to evaluate (1) responses of the hydrologic system to changes in natural and anthropogenic hydraulic stresses, (2) the subsurface distribution of groundwater age, and (3) the regional-scale distribution of groundwater travel times and the source of water to fresh surface waters and coastal receiving waters. The model also provides the groundwater flow components used to define model boundaries for possible inset models used for local-scale analyses. The three-dimensional, groundwater flow model developed for this investigation uses the numerical code MODFLOW–NWT to represent steady-state conditions for average groundwater pumping and aquifer recharge for 2005–15. The particle-tracking algorithm MODPATH, which simulates advective transport in the aquifer, was used to estimate groundwater age, delineate the areas at the water table that contribute recharge to coastal and freshwater bodies, and estimate total travel times of water from the water table to discharge locations. A three-dimensional, 1-meter (3.3-foot) topobathymetric model was used to determine land-surface altitudes for the island and seabed altitudes for the surrounding coastal waters. The mapped extents and surface altitudes of major geologic units were compiled and used to develop a three-dimensional hydrogeologic framework of the aquifer system, including aquifers and confining units. Lithologic data from deep boreholes and previous aquifer-test results were used to estimate the three-dimensional distribution of hydraulic conductivity in principal aquifers. Natural recharge from precipitation was estimated for 2005–15 using a modified Thornthwaite-Mather methodology as implemented in a soil-water balance model. Components of anthropogenic recharge—wastewater return flow, storm water inflow, and inflow from leaky infrastructure—also were estimated for 2005–15. Groundwater withdrawals for various sources, including public water supply, industrial, remediation, and agricultural, were compiled or estimated for the same period. These data were incorporated into the model development to represent the aquifer system geometry, boundaries, and initial hydraulic properties of the regional aquifers and confining units within the Long Island aquifer system. Average hydraulic conditions—water levels and streamflows—for 2005–15 were estimated using existing data from the U.S. Geological Survey National Water Information System database. Model inputs were adjusted to best match average hydrologic conditions using inverse methods as implemented in the parameter-estimating software PEST. The calibrated model was used to simulate average hydrologic conditions in the aquifer system for 2005–15. About 656 cubic feet per second of water was withdrawn on average annually for 2005–15 for water supply and an average of about 349 cubic feet per second of water recharged the aquifer annually from return flow and leaky infrastructure. Parts of New York City have drawdowns exceeding 25 feet, mostly because of urbanization and associated large decreases in recharge rates. Large areas in the western part of the island have drawdowns exceeding 10 feet, mostly from large groundwater withdrawals and sewering, which largely eliminates wastewater return flow. Water-table altitudes in eastern parts of the island increased by more than 2 feet in some areas as a result of wastewater return flow in unsewered areas and changes in land use. Changes in streamflows show a similar pattern as water-table altitudes. Streamflows generally decrease in western parts of the island where there are large drawdowns and increase in eastern parts of the island where water-table altitudes increase.

New York↗
USGS2014

Report of the committee on underground waters, 1938–39

In preparing the report of the Committee on Underground Waters of the Section of Hydrology for the final year of the triennium, it becomes evident that the collection of fundamental data relating to the hydrology of underground waters continues at a rate comparable to that maintained in the past few years, and perhaps even at an accelerated rate. Almost every extensive practical investigation of ground‐water supplies offers some opportunity for study of fundamental problems, in fact many of them require such fundamental study. With a larger number of investigations in progress, and with fairly liberal appropriations much new and valuable information is being discovered. Some idea of the increase in ground‐water studies since the organization of the Section of Hydrology may be given by a few statistics on the work of the Division of Ground‐Water of the Federal Geological Survey, which does the largest amount of ground‐water work in the United States. In 1932 the Division worked on about 50 projects in 25 States, in 15 of which and in Hawaii the investigations were made in cooperation with States, or other local Governmental agencies. During the current fiscal year work has been completed, or is in progress, on about 100 investigations in 35 States, Hawaii, and the Virgin Islands. The number of States cooperating on the work has increased to 24. During the current fiscal year about \$375,000 will be spent for ground‐water investigations by the Federal Geological Survey and cooperating organizations, as compared to about $175,000 spent during the fiscal year ended June 30, 1932.

Eos, Transactions, American Geophysical Union↗
USGS2014

Petrophysical properties, mineralogy, fractures, and flow tests in 25 deep boreholes at Yucca Mountain, Nevada

As part of a site investigation for the disposal of radioactive waste, numerous boreholes were drilled into a sequence of Miocene pyroclastic flows and related deposits at Yucca Mountain, Nevada. This report contains displays of data from 25 boreholes drilled during 1979–1984, relatively early in the site investigation program. Geophysical logs and hydrological tests were conducted in the boreholes; core and cuttings analyses yielded data on mineralogy, fractures, and physical properties; and geologic descriptions provided lithology boundaries and the degree of welding of the rock units. Porosity and water content were computed from the geophysical logs, and porosity results were combined with mineralogy from x-ray diffraction to provide whole-rock volume fractions. These data were composited on plates and used by project personnel during the 1990s. Improvements in scanning and computer technology now make it possible to publish these displays.

Nevada↗
USGS1993

The Loma Prieta, California, earthquake of October 17, 1989: Preseismic observations

The October 17, 1989, Loma Prieta, Calif., Ms=7.1 earthquake provided the first opportunity in the history of fault monitoring in the United States to gather multidisciplinary preearthquake data in the near field of an M=7 earthquake. The data obtained include observations on seismicity, continuous strain, long-term ground displacement, magnetic field, and hydrology. The papers in this chapter describe these data, their implications for fault-failure mechanisms, the scale of prerupture nucleation, and earthquake prediction in general. Of the 10 papers presented here, about half identify preearthquake anomalies in the data, but some of these results are equivocal. Seismicity in the Loma Prieta region during the 20 years leading up to the earthquake was unremarkable. In retrospect, however, it is apparent that the principal southwest-dipping segment of the subsequent Loma Prieta rupture was virtually aseismic during this period. Two M=5 earthquakes did occur near Lake Elsman near the junction of the Sargent and San Andreas faults within 2.5 and 15 months of, and 10 km to the north of, the Loma Prieta epicenter. Although these earthquakes were not on the subsequent rupture plane of the Loma Prieta earthquake and other M=5 earthquakes occurred in the preceding 25 years, it is now generally accepted that these events were, in some way, foreshocks to the main event.

California↗
USGS2004

Delineation of Areas Contributing Water to the Dry Brook Public-Supply Well, South Hadley, Massachusetts

Areas contributing water to the Dry Brook public-supply well in South Hadley, Massachusetts, were delineated with a numerical ground-water-flow model that is based on geologic and hydrologic information for the confined sand and gravel aquifer pumped by the supply well. The study area is along the Connecticut River in central Massachusetts, about 12 miles north of Springfield, Massachusetts. Geologic units in the study area consist of Mesozoic-aged sedimentary and igneous bedrock, late-Pleistocene glaciolacustrine sediments, and recent alluvial deposits of the Connecticut River flood plain. Dry Brook Hill, immediately south of the supply well, is a large subaqueous lacustrine fan and delta formed during the last glacial retreat by sediment deposition into glacial Lake Hitchcock from a meltwater tunnel that was likely near where the Connecticut River cuts through the Holyoke Range. The sediments that compose the aquifer grade from very coarse sand and gravel along the northern flank of the hill, to medium sands in the body of the hill, and to finer-grained sediments along the southern flank of the hill. The interbedded and overlapping fine-grained lacustrine sediments associated with Dry Brook Hill include varved silt and clay deposits. These fine-grained sediments form a confining bed above the coarse-grained aquifer at the supply well and partially extend under the Connecticut River adjacent to the supply well. Ground-water flow in the aquifer supplying water to Dry Brook well was simulated with the U.S. Geological Survey ground-water-flow modeling code MODFLOW. The Dry Brook aquifer model was calibrated to drawdown data collected from 8 observation wells during an aquifer test conducted by pumping the supply well for 10 days at a rate of 122.2 cubic feet per minute (ft3/min; 914 gallons per minute) and to water levels collected from observation wells across the study area. Generally, the largest hydraulic conductivity values used in the model were in the sand and gravel aquifer near the Dry Brook well, which is consistent with the geologic information. Results of aquifer-test simulation indicated that spatially variable aquifer hydraulic properties and boundary conditions affected heads and ground-water flow near the well. A comparison and analysis of water-level fluctuations in study area wells to fluctuations in the Connecticut River indicated a hydraulic connection of the aquifer with the river, which is also consistent with geologic information. Simulated ground-water levels indicated that most ground water in the study area flowed toward and discharged to the Connecticut River and the Dry Brook well. Small amounts of ground water also discharged to smaller streams (Dry Brook and Bachelor Brook) in the study area. Areas contributing water to the well were delineated with the MODPATH particle-tracking routine. Results of the contributing-area analysis indicated that the greatest sources of water to the well were recharge in the Dry Brook Hill area and infiltration of Connecticut River water in an area beyond the extent of the confining bed where the aquifer is in hydraulic connection with the river. The amount of water entering the Dry Brook well from recharge dominated at a lower pumping rate (40.0 ft3/min); about 90 percent of the pumped water originated from recharge and boundary flow, and infiltration from the Connecticut River supplied the remaining 10 percent. At a high pumping rate (122.2 ft3/min), however, about half of the water pumped from the Dry Brook well originated from recharge and boundary flow (49 percent), and half originated from infiltration of water from the Connecticut River (51 percent). Results of a sensitivity analysis of the extent of areas contributing water to the Dry Brook well when pumped at 122.2 ft3/min indicated that the size of these areas did not substantially change when aquifer properties were varied. In contrast, however, the size of these areas changed most when the recharge

Water-Resources Investigations Report↗
USGS1989

Summary of hydrologic data for the San Gabriel River basin and Edwards Aquifer, Georgetown area, Texas, water year 1988

The Edwards aquifer is the principle source of freshwater for municipal, domestic, and industrial users in the Georgetown area. Other sources of freshwater are the streams draining the San Gabriel River basin and Lake Georgetown. Lake Georgetown, located on the North Fork San Gabriel River west of Georgetown, is a freshwater supply for some municipalities in the area, water in the San Gabriel River basin also supplies a variety of needs east of Georgetown. Because of the importance of the Edwards aquifer and the surface waters in the area, the U.S. Geological Survey, in cooperation with the city of Georgetown, conducted a monitoring program of the Edwards Aquifer and principal streams during water year 1988. The study area centered on Georgetown and encompassed an area of about 150 square miles (fig. 1). The freshwater resources in the Georgetown area have been the subject of three recent reports. Baker and others (1986) described the Edwards aquifer and the relation between recharge and discharge. Krietier and others (1987) provided fracture analysis, geologic mapping, ground-water chemistry, and the relation between rainfall and recharge in the study area. Land and Dorsey (1988) conducted an investigation to reassess the inclusion of the Georgetown Limestone as one of the geologic units comprising the Edwards aquifer. In addition, the Geological Survey publishes streamflow and water-quality data in the Water Resources Data for Texas report on an annual basis. The primary purpose of this report is to present a summary of the hydrologic data collected from the streams draining the San Gabriel River basin and from the Edwards aquifer during the 1988 water year (October 1987–September 1988). A secondary purpose is to add perspective to the 1988 data by including data from the previous 2 years (1986 and 1987) when available. The scope of the report is limited to the Georgetown area (fig. 1) and to data collected by the Geological Survey.

Texas↗
USGS2018

Linking transit times to catchment sensitivity to atmospheric deposition of acidity and nitrogen in mountains of the western United States

Transit times are hypothesized to influence catchment sensitivity to atmospheric deposition of acidity and nitrogen (N) because they help determine the amount of time available for infiltrating precipitation to interact with catchment soil and biota. Transit time metrics, including fraction of young water ( F yw ) and mean transit time (MTT), were calculated for 11 headwater catchments in mountains of the western United States based on differences in the amplitude of the seasonal signal of δ 18 O in streamflow and precipitation. Results were statistically compared with catchment characteristics to elucidate controlling mechanisms. Transit times also were compared with stream solute concentrations to test the hypothesis that transit times are a primary influence on weathering rates and biological assimilation of atmospherically deposited N. Results indicate that transit times in the study catchments are strongly related to soil, vegetation, and topographic characteristics, with barren terrain (bare rock and talus) and steep slopes linked to high F yw and short MTT, whereas forest soil (hydrogroup B) was linked to low F yw and greater MTT. Concentrations of silicate weathering products (Na + and Si) were negatively related to F yw and barren terrain, and positively related to MTT and forest soil, supporting the concept that weathering fluxes and buffering capacity tend to be low in alpine areas due to short transit times. Nitrate concentrations were positively related to N deposition, catchment slope, and barren terrain, and negatively related to forest, indicating that hydrologic and/or biogeochemical processes associated with steep slopes limit uptake of atmospherically deposited N by biota. Interannual and seasonal variability in transit times and source water contributions in the study catchments was substantial, reflecting the influence of strong temporal variations in snowmelt inputs in high‐elevation catchments of the western United States. Results from this study confirm that short transit times in these areas are a key reason they are highly sensitive to atmospheric pollution and climate change.

Hydrological Processes↗
USGS2021

Compilation of information on occurrence and conservation status for the freshwater mussel fauna of Nebraska, Kansas, and Oklahoma

The purpose of this data series is to compile information on the occurrence and conservation status of the freshwater mussel fauna of Nebraska, Kansas, and Oklahoma and to map the distribution of a freshwater mussel assemblage for the U.S. Department of the Interior, Bureau of Land Management Rapid Ecoregional Assessment (REA) program. The six focal species in the freshwater mussel assemblage are Amblema plicata ( threeridge), Fusconaia flava (Wabash pigtoe), Lampsilis cardium (plain pocketbook), Lampsilis teres (yellow sandshell), Pyganodon grandis (giant floater), and Uniomerus tetralasmus (pondhorn). The focal species were selected using the following criteria: (1) the species are regionally significant, (2) occurrence records are sufficient to map the distribution of the species by hydrologic subbasins, (3) the assemblage includes species representing a range of State-level conservation priorities, and (4) the species are not listed as federally endangered or threatened. In addition, the species represent a broad array of life history strategies and habitat associations. A total of 61 native species of freshwater mussels have documented occurrences within at least 1 of the 3 States, including 6 species that appear to have been extirpated from all the States and 6 species that may have been extirpated from at least 1 State. Of the 61 species, 8 species (including 3 potentially extirpated species) are listed as federally threatened or endangered and an additional 5 species are ranked as imperiled or vulnerable across their range. Approximately 80 percent of the native species known to have occurred within the three-State area have a secure conservation status, in comparison to only 40 percent of all freshwater mussel species or subspecies occurring within the United States. The compiled records for the contemporary period (1970–2017) documented the occurrence of 24 extant species in Nebraska, 42 in Kansas, and 48 in Oklahoma. The contemporary distributions of the six focal species were mapped by subbasins and the larger hydrologic subregions. Historical records (prior to 1962) were also mapped but were limited. Amblema plicata , Fusconaia flava , and Lampsilis cardium were present in approximately one-third of all subbasins and slightly more than half of the subregions, primarily along the eastern portion of the three-State area. Lampsilis teres and Uniomerus tetralasmus were more widespread, occurring in close to half of the subbasins and about three-quarters of the subregions. Pyganodon grandis was the most widespread, occurring in about three-quarters of the subbasins and almost all subregions. There were very few subbasins with historical occurrences that lacked contemporary occurrences. The broad-scale distribution maps for the freshwater mussel assemblage presented with this report are intended to contribute baseline information for regional assessments, such as the Southern Great Plains Rapid Ecoregional Assessment. Despite the limitations of the available data, such baseline information can be useful for identifying data gaps, monitoring future trends, identifying conservation priorities, and providing the larger context for more detailed watershed- or catchment-level studies. ScienceBase data release files associated with this data series are available at https://doi.org/10.5066/P9SBFZJU (Fancher and Carr, 2021).

Kansas, Nebraska, Oklahoma↗
USGS2024

Hydrogeologic conceptual model of groundwater occurrence and brine discharge to the Dolores River in the Paradox Valley, Montrose County, Colorado

Salinity, or total dissolved solids (TDS), of the Colorado River is a major concern in the southwestern United States where the river provides water to about 40 million people for municipal and industrial use and is used to irrigate about 5.5 million acres of land. Much of the salinity in the Colorado River Basin is derived from natural interactions of surface water and groundwater with various geologic materials (rocks, soils, and alluvial deposits). The Dolores River in southwest Colorado is a major tributary of the Colorado River that historically accounts for about 6 percent of the salinity load to the Upper Colorado River Basin with the Paradox Valley being the primary source of salinity to the Dolores River. The Paradox Valley, one of several salt-anticline valleys in the region, is a fault-bounded topographic basin aligned with and exposing an underlying salt-anticline core. Salt deposits in the Pennsylvanian Paradox Formation of the Hermosa Group form an elongated salt diapir oriented northwest to southeast that is up to 12,000 feet (ft) thick beneath the present valley floor. Surface erosion, groundwater circulation, and weathering during Tertiary and Quaternary valley formation contributed to development of a cap rock, collapse features, breccia, and brine at the top of the exposed salt diapir. Today (2023), brine occurring in the brecciated cap rock and underlying salt deposits is in hydraulic connection with an overlying freshwater alluvial aquifer, and depending on seasonal river stage and hydrologic conditions, the brine discharges to the Dolores River causing the observed increase in salinity as the river crosses the Paradox Valley. To reduce salinity concentrations in the Dolores River, the Bureau of Reclamation (Reclamation) operates the Paradox Valley Unit (PVU). The PVU project consists of nine shallow brine pumping wells near the Dolores River and one deep disposal well where the brine is injected for disposal. When operational, the PVU pumping wells extract brine from the base of the alluvial aquifer that is piped and injected into a deep disposal well about 3 miles southwest of the PVU. The PVU became fully operational July 1, 1996, and by 2015, operation of the PVU had reduced salinity concentrations in the Dolores River by as much as 70 percent compared to pre-PVU conditions. In response to a 4.5 magnitude earthquake, injection operations, and thus PVU pumping, were ceased from March 2019 to June 2022. A trial period of PVU operation began in June 2022 with a reduced injection rate, and thus PVU pumping rate, of about two-thirds capacity to gather additional information and guide future operational decisions. In cooperation with Reclamation, the U.S. Geological Survey (USGS) developed this report to present the current (2023) understanding of groundwater and brine occurrence and discharge to the Dolores River in the Paradox Valley. Results from the compilation of spatial datasets, groundwater sampling and age dating, and aquifer tests are presented to provide improved understanding of the Paradox Valley hydrogeology, to supply datasets for a numerical groundwater-flow and brine-transport model, and to support future operations of the PVU. The hydrogeologic data provided herein, along with the most recent loading analysis for the Dolores River in the Paradox Valley, and a previous conceptual model for brine discharge to the river are used to present a conceptual understanding of groundwater occurrence in the Paradox Valley.

Colorado↗
USGS2005

Bathymetry and vegetation in isolated marsh and cypress wetlands in the northern Tampa Bay Area, 2000-2004

Wetland bathymetry and vegetation mapping are two commonly used lines of evidence for assessing the hydrologic and ecologic status of expansive coastal and riverine wetlands. For small isolated freshwater wetlands, however, bathymetric data coupled with vegetation assessments are generally scarce, despite the prevalence of isolated wetlands in many regions of the United States and the recognized importance of topography as a control on inundation patterns and vegetation distribution. In the northern Tampa Bay area of west-central Florida, bathymetry was mapped and vegetation was assessed in five marsh and five cypress wetlands. These 10 isolated wetlands were grouped into three categories based on the effects of ground-water withdrawals from regional municipal well fields: natural (no effect), impaired (drier than natural), and augmented (wetlands with artificially augmented water levels). Delineation of the wetland perimeter was a critical component for estimating wetland-surface area and stored water volume. The wetland perimeter was delineated by the presence of Serenoa repens (the 'palmetto fringe') at 9 of the 10 sites. At the 10th site, where the palmetto fringe was absent, hydric-soils indicators were used to delineate the perimeter. Bathymetric data were collected using one or more techniques, depending on the physical characteristics of each wetland. Wetland stage was measured hourly using continuous stage recorders. Wetland vegetation was assessed semiannually for 2 1/2 years in fixed plots located at three distinct elevations. Vegetation assessments were used to determine the community composition and the relative abundance of obligate, facultative wet, and facultative species at each elevation. Bathymetry maps were generated, and stage-area and stage-volume relations were developed for all 10 wetlands. Bathymetric data sets containing a high density of data points collected at frequent and regular spatial intervals provided the most useful stage-area and stage-volume relations. Bathymetric maps of several wetlands also were generated using a low density of data points collected along transect lines or contour lines. In a comparative analysis of the three mapping approaches, stage-area and stage-volume relations based on transect data alone underestimated (by 50-100 percent over certain ranges of stage) the wetland area and volume compared to results using a high density of data points. Adding data points collected along one elevation contour below the wetland perimeter to the transect data set greatly improved the agreement of the resulting stage-area and stage-volume relations to the high-density mapping approach. Stage-area relations and routinely monitored stage data were used to compare and contrast the average flooded area in a natural marsh and an impaired marsh over a 2-year period. Vegetation assessments used together with flooded-area information provided the potential for extrapolating vegetation results from points or transects to wetlands as a whole. A comparison of the frequency of flooding of different areas of the wetland and the species composition in vegetation plots at different elevations indicated the dependence of vegetation on inundation frequency. Because of the broad tolerances of many wetlands plants to a range of inundation conditions, however, vegetation assessments alone provided less definitive evidence of the hydrologic differences between the two sites, and hydrologic changes occurring during the 2 years, than the flooded-area frequencies. Combining flooded-area frequencies with vegetation assessments could provide a more versatile and insightful approach for determining the ecological status of wetlands than using vegetation and stage data alone. Flooded-area frequencies may further provide a useful approach for assessing the ecological status of wetlands where historical vegetation surveys and stage data are lacking. Comparing the contemporary flooded-area frequencies a

Scientific Investigations Report↗
USGS2023

Geology, hydrology, and groundwater contamination in the vicinity of Central Chemical facility, Hagerstown, Maryland

The soil and groundwater at the Central Chemical facility, Hagerstown, Maryland, are contaminated due to the blending and production of pesticides and fertilizers during much of the 20th century. Remedial investigations focus on two operable units (OU) consisting of the surface soils and waste disposal lagoon (OU-1) and the groundwater (OU-2). The contaminants of concern (COC) for groundwater include 41 compounds categorized within the subgroups of volatile organic compounds (VOCs), semi-volatile organic compounds (SVOCs), pesticides, and metals. The purpose of this report is to provide a conceptual site model of the hydrogeology and groundwater contaminant transport at and near the Central Chemical facility. The conceptual model was developed through review, synthesis, and interpretation of the results of hydrogeologic, soil, and other environmental investigations conducted at and in the vicinity of the facility in recent decades and is intended to support plans for environmental remediation of the groundwater in OU-2. The extent and nature of the groundwater contaminant plume associated with the bedrock was characterized for OU-2 of the site. Lithologic and structural comparisons between shallow soil, weathered rock, and epikarst and deeper competent but bedded, dipping, fractured, and karstic limestones illustrate two connected flow systems—a surficial flow system consisting of the unconsolidated overburden and epikarst and a structurally dominant bedrock flow system below the epikarst. Uncertainties exist regarding the nature and transport of contaminants within the epikarst system particularly within voids and perched epikarst water tables. Karst dissolution features are observed within the site including sinkholes and dissolution voids within wells at the site. Of interest, one well in the northern part of the study area (MW-J-71) appears to have a dissolution void connected to an offsite well (OW-2-115) farther to the north. This connection is supported by groundwater level data and elevated concentrations of total suspended solids (TSS) and chlorobenzene in both wells. The high level of TSS supports the possibility of offsite transport of particle-bound contaminants within the conduit system. Episodically elevated concentrations of COC from different groups also were observed within select wells in the epikarst near the waste disposal lagoon (particularly MW-A-51). The variability observed between different COC within the same well may be the result of additional contaminated source materials unrelated to the disposal lagoon. Storage and episodic transport of contaminated material within the epikarst system has the potential to hinder remediation efforts if not considered in the remedial action.

Maryland↗
USGS1984

Ground-water hydrology and projected effects of ground-water withdrawals in the Sevier Desert, Utah

The principal ground-water reservoir in the Sevier Desert is the unconsolidated basin fill. The fill has been divided generally into aquifers and confining beds, although there are no clearcut boundaries between these units--the primary aquifers are the shallow and deep artesian aquifers. Recharge to the ground-water reservoir is by infiltration of precipitation; seepage from streams, canals, reservoirs, and unconsumed irrigation water; and subsurface inflow from consolidated rocks in mountain areas and from adjoining areas. Discharge is by wells, springs, seepage to the Sevier River, evapotranspiration, and subsurface outflow to adjoining areas.

Utah↗
USGS2008

Developing conceptual hydrogeological model for Potsdam sandstones in southwestern Quebec, Canada

A hydrogeological study was conducted in Potsdam sandstones on the international border between Canada (Quebec) and the USA (New York). Two sandstone formations, arkose and conglomerate (base) and well-cemented quartz arenite (upper), underlie the study area and form the major regional aquifer unit. Glacial till, littoral sand and gravel, and marine silt and clay discontinuously overlie the aquifer. In both sandstone formations, sub-horizontal bedding planes are ubiquitous and display significant hydraulic conductivities that are orders of magnitude more permeable than the intact rock matrix. Aquifer tests demonstrate that the two formations have similar bulk hydrologic properties, with average hydraulic conductivities ranging from 2 ?? 10-5 to 4 ?? 10-5 m/s. However, due to their different lithologic and structural characteristics, these two sandstones impose rather different controls on groundwater flow patterns in the study area. Flow is sustained through two types of fracture networks: sub-horizontal, laterally extensive fractures in the basal sandstone, where hydraulic connectivity is very good horizontally but very poor vertically and each of the water-bearing bedding planes can be considered as a separate planar two-dimensional aquifer unit; and the more fractured and vertically jointed system found in the upper sandstone that promotes a more dispersed, three-dimensional movement of groundwater. ?? Springer-Verlag 2007.

Hydrogeology Journal↗
USGS2013

Climate change and watershed mercury export: a multiple projection and model analysis

Future shifts in climatic conditions may impact watershed mercury (Hg) dynamics and transport. An ensemble of watershed models was applied in the present study to simulate and evaluate the responses of hydrological and total Hg (THg) fluxes from the landscape to the watershed outlet and in-stream THg concentrations to contrasting climate change projections for a watershed in the southeastern coastal plain of the United States. Simulations were conducted under stationary atmospheric deposition and land cover conditions to explicitly evaluate the effect of projected precipitation and temperature on watershed Hg export (i.e., the flux of Hg at the watershed outlet). Based on downscaled inputs from 2 global circulation models that capture extremes of projected wet (Community Climate System Model, Ver 3 [CCSM3]) and dry (ECHAM4/HOPE-G [ECHO]) conditions for this region, watershed model simulation results suggest a decrease of approximately 19% in ensemble-averaged mean annual watershed THg fluxes using the ECHO climate-change model and an increase of approximately 5% in THg fluxes with the CCSM3 model. Ensemble-averaged mean annual ECHO in-stream THg concentrations increased 20%, while those of CCSM3 decreased by 9% between the baseline and projected simulation periods. Watershed model simulation results using both climate change models suggest that monthly watershed THg fluxes increase during the summer, when projected flow is higher than baseline conditions. The present study's multiple watershed model approach underscores the uncertainty associated with climate change response projections and their use in climate change management decisions. Thus, single-model predictions can be misleading, particularly in developmental stages of watershed Hg modeling.

South Carolina↗
USGS2020

Modeling the surface water and groundwater budgets of the US using MODFLOW-OWHM

Assessments of groundwater and surface water budgets at a large scale, such as the contiguous United States, often separately analyze the complex dynamics linking the surface and subsurface categories of water resources. These dynamics include recharge and groundwater contributions to streamflow. The time-varying simulation of these complex hydrologic dynamics, across large spatial and temporal scales, remains a scientific challenge due to the complexity of the processes and data availability. In this study, groundwater fluxes and surface hydrologic processes are simulated across the contiguous US for 1950-2010. The simulation estimates the monthly water budget components, such as groundwater recharge, surface runoff, and evapotranspiration; streamflow in major rivers is routed while accounting for groundwater exchange. Human impacts are included through groundwater pumping, and climate variability is included, including variability in precipitation, temperature and potential evapotranspiration. The simulated groundwater level and river discharge have strong correlation with USGS observation wells and streamflow gages, with R 2 values of 0.992 and 0.946, respectively. The simulated evapotranspiration is compared with three other published estimation methods, showing that it is able to capture the magnitude and seasonality of evapotranspiration over the Mississippi River basin. As such, the model is able to reasonably simulate the surface and groundwater budgets over the US, allowing for questions of the relative importance of climate and human impacts to be explored in the future.

Advances in Water Resources↗
USGS2014

A method for determining transmissibility‐ and storage‐coefficients by tests of multiple well‐systems

Ground‐water has long been recognized as one of our important natural resources, but only in about the last 20 years has concentrated effort been made to place ground‐water hydrology on a quantitative basis. The quantitative approach to ground‐water work has been brought about largely through the leadership of O. E. MEINZER, Chief of the Ground‐Water Division of the Geological Survey, United States Department of the Interior, who has originated and applied many quantitative methods himself, and who has consistently fostered and encouraged this method of attack by his coworkers. That this effort has been ably directed and especially fruitful Is shown by the vast number of important ground‐water problems relating to the water‐supplies for war activities that have been worked out by means of quantitative methods in the last few years.

Eos, Transactions, American Geophysical Union↗
USGS2002

Lithologic and ground-water data for monitoring sites in the Mojave River and Warren Valley basins, San Bernardino County, California, 1992-1998

Lithologic and ground-water data were collected at 85 monitoring sites constructed in the Mojave Water Agency Management area in San Bernardino County, California, as part of a series of cooperative studies between the U.S. Geological Survey and the Mojave Water Agency. The data are being used to evaluate and address water-supply and water-quality issues. This report presents a compilation of the data collected at these sites from 1992 through 1998, including location and design of the monitoring sites, lithologic data, geophysical logs, ground-water-level measurements, and water-quality analyses.One to five small (generally 2-inch) diameter wells were installed at each of the 85 monitoring sites to collect depth-dependent hydrologic data. Lithologic logs were compiled from descriptions of drill cuttings collected at each site and from observations recorded during the drilling of the borehole. Generalized stratigraphic columns were compiled by grouping similar lithologic units. Geophysical logs provide information on the character of the lithologic units and on the presence of ground water and the chemical characteristics of that water. Water-level and water-quality data were collected periodically from the sites during 1992 through 1998.

Open-File Report↗