Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Chemical Physics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70Linked to original sources

Irrigated agriculture and future climate change effects on groundwater recharge, northern High Plains aquifer, USA

Understanding the controls of agriculture and climate change on recharge rates is critically important to develop appropriate sustainable management plans for groundwater resources and coupled irrigated agricultural systems. In this study, several physical (total potential ( ψ T ) time series) and chemical tracer and dating ( 3 H, Cl − , Br − , CFCs, SF 6 , and 3 H/ 3 He) methods were used to quantify diffuse recharge rates beneath two rangeland sites and irrigation recharge rates beneath two irrigated corn sites along an east-west (wet-dry) transect of the northern High Plains aquifer, Platte River Basin, central Nebraska. The field-based recharge estimates and historical climate were used to calibrate site-specific Hydrus-1D models, and irrigation requirements were estimated using the Crops Simulation Model (CROPSIM). Future model simulations were driven by an ensemble of 16 global climate models and two global warming scenarios to project a 2050 climate relative to the historical baseline 1990 climate, and simulate changes in precipitation, irrigation, evapotranspiration, and diffuse and irrigation recharge rates. Although results indicate statistical differences between the historical variables at the eastern and western sites and rangeland and irrigated sites, the low warming scenario (+1.0 °C) simulations indicate no statistical differences between 2050 and 1990. However, the high warming scenarios (+2.4 °C) indicate a 25% and 15% increase in median annual evapotranspiration and irrigation demand, and decreases in future diffuse recharge by 53% and 98% and irrigation recharge by 47% and 29% at the eastern and western sites, respectively. These results indicate an important threshold between the low and high warming scenarios that if exceeded could trigger a significant bidirectional shift in 2050 hydroclimatology and recharge gradients. The bidirectional shift is that future northern High Plains temperatures will resemble present central High Plains temperatures and future recharge rates in the east will resemble present recharge rates in the western part of the northern High Plains aquifer. The reductions in recharge rates could accelerate declining water levels if irrigation demand and other management strategies are not implemented. Findings here have important implications for future management of irrigation practices and to slow groundwater depletion in this important agricultural region.

Northern High Plains Aquifer↗

Micromineralogy of silver-bearing sphalerite from Flat River, Missouri

Detailed mineralogical and chemical study of sphalerite-rich lead ores from Flat River, Mo., confirms the presence of anomalous amounts of silver in the sphalerite. Although silver is closely associated with chlorine and no silver sulfide minerals were identified, geochemical considerations indicate the silver may be in the form of discrete submicron-size grains of sulfide rather than chloride. However, the close correlation between abundance variations in silver, chlorine, cadmium, iron, and minor lead suggests the possible existence of submicron-size grains of a complex chloride or oxychloride. Results from detailed chemical study of sphalerite show: (1) chlorine is present in areas containing silver and changes in abundance of both elements are similar; (2) the mole ratio of chlorine to silver varies from approximately 3:1 to 6:1 with an approximate average of 5:1 and the total content of each element varies widely between grains and within the same grain; (3) taking total silver in any analysis and calculating the amount of chlorine required for silver chloride leaves an excess of chlorine; (4) in chlorine-deficient areas the amounts of iron and cadmium substituting for zinc in the sphalerite structure vary widely; and (5) in areas containing chlorine, changes in abundance of iron and cadmium vary directly with that of chlorine. The fine-grained dusty opaque inclusions characterize sphalerite from this area; they were identified as mainly galena with lesser amounts of pyrite and cassiterite. Galena is silver-free (<0.02 weight percent Ag) and is essentially pure lead sulfide. Other sulfides identified include pyrite, a cobalt-nickel-iron sulfide of composition Co (sub 0.55) Ni (sub 0.25) Fe (sub 0.20) S (sub 2.00), and an iron-cobalt-nickel sulfide containing 22-28 weight percent Fe, 10-15 weight percent Co, and 3-5 weight percent Ni. Anomalous amounts of tin present as cassiterite are associated with the gangue minerals quartz, potash feldspar, a kaolinite-type clay, and trace amounts of cuprite. Carbonate gangue minerals include calcite, dolomite, ankerite, magnesite, and minor amounts of cerussite. Chemical analyses were made of many minerals and physical and textural relationships examined.

Missouri↗

Strategies for soil quality assessment using VNIR gyperspectral spectroscopy in a western Kenya Chronosequence

Visible and near-infrared reflectance spectroscopy (VNIRS) is a rapid and nondestructive method that can predict multiple soil properties simultaneously, but its application in multidimensional soil quality (SQ) assessment in the tropics still needs to be further assessed. In this study, VNIRS (350–2500 nm) was employed to analyze 227 air-dried soil samples of Ultisols from a soil chronosequence in western Kenya and assess 16 SQ indicators. Partial least squares regression (PLSR) was validated using the full-site cross-validation method by grouping samples from each farm or forest site. Most suitable models successfully predicted SQ indicators (R 2 ≥ 0.80; ratio of performance to deviation [RPD] ≥ 2.00) including soil organic matter (OM LOI ), active C, Ca, cation exchange capacity (CEC), and clay. Moderately-well predicted indicators (0.50 ≤ R 2 < 0.80; 1.40 ≤ RPD < 2.00) were water stable aggregation (WSA), Cu, silt, Mg, pH, sand, water content at permanent wilting point (Θ pwp ), and field capacity (Θ fc ). Poorly predicted indicators (R 2 < 0.50; RPD < 1.40) were EC, S, P, available water capacity (AWC), K, Zn, and penetration resistance. Combining VNIRS with selected field- and laboratory-measured SQ indicator values increased predictability. Furthermore, VNIRS showed moderate to substantial agreement in predicting interpretive SQ scores and a composite soil quality index (CSQI) especially when combined with directly measured SQ indicator values. In conclusion, VNIRS has good potential for low cost, rapid assessment of physical and biological SQ indicators but conventional soil chemical tests may need to be retained to provide comprehensive SQ assessments.

Western Kenya↗

Potential Environmental and Environmental-Health Implications of the SAFRR Tsunami Scenario in California: Chapter F in The SAFRR (Science Application for Risk Reduction) Tsunami Scenario

The California Tsunami Scenario models the impacts of a hypothetical, yet plausible, tsunami caused by an earthquake offshore from the Alaska Peninsula. In this chapter, we interpret plausible tsunami-related contamination, environmental impacts, potential for human exposures to contaminants and hazardous materials, and implications for remediation and recovery. Inundation-related damages to major ports, boat yards, and many marinas could release complex debris, crude oil, various fuel types and other petroleum products, some liquid bulk cargo and dry bulk cargo, and diverse other pollutants into nearby coastal marine environments and onshore in the inundation zone. Tsunami-induced erosion of contaminated harbor bottom sediments could re-expose previously sequestered metal and organic pollutants (for example, organotin or DDT). Inundation-related damage to many older buildings could produce debris containing lead paint, asbestos, pesticides, and other legacy contaminants. Intermingled household debris and externally derived debris and sediments would be left in flooded buildings. Post tsunami, mold would likely develop in inundated houses, buildings, and debris piles. Tsunamigenic fires in spilled oil, debris, cargo, vehicles, vegetation, and residential, commercial, or industrial buildings and their contents would produce potentially toxic gases and smoke, airborne ash, and residual ash/debris containing caustic alkali solids, metal toxicants, asbestos, and various organic toxicants. Inundation of and damage to wastewater treatment plants in many coastal cities could release raw sewage containing fecal solids, pathogens, and waste chemicals, as well as chemicals used to treat wastewaters. Tsunami-related physical damages, debris, and contamination could have short- and longer-term impacts on the environment and the health of coastal marine and terrestrial ecosystems. Marine habitats in intertidal zones, marshes, sloughs, and lagoons could be damaged by erosion or sedimentation, and could receive an influx of debris, metal and organic contaminants, and sewage-related pathogens. Debris and re-exposed contaminated sediments would be a source of sea- or rain-water-leachable metal and organic contaminants that could pose chronic toxicity threats to ecosystems. If human populations are successfully evacuated prior to the tsunami arrival, there would be no or limited numbers of drownings, other casualties, or related injuries, wounds, and infections. Immediately after the tsunami, human populations away from the inundation zone could be transiently exposed to airborne gases, smoke, and ash from tsunamigenic fires. Cleanup and disposal, particularly of hazardous materials, would pose substantial logistical challenges and economic costs. Given the high value of the coastal residential and commercial properties in the inundation zone, it can be postulated that there would be substantial insurance claims for environmental restoration, mold mitigation, disposal of debris that contains hazardous materials, and costs of litigation related to environmental liability. Post-tsunami cleanup, if done with appropriate mitigation (for example, dust control), personal protection, and disposal measures, would help reduce the potential for cleanup-worker and resident exposures to toxicants and pathogens in harbor waters, debris, soils, ponded waters, and buildings. A number of other steps can be taken by governments, businesses, and residents to help reduce the environmental impacts of tsunamis and to recover more quickly from these environmental impacts. For example, development of State and local policies that foster rapid assessment of potential contamination, as well as rapid decision making for disposal options should hazardous debris or sediment be identified, would help enhance recovery by speeding cleanup.

California↗

Ground-water-quality assessment of the central Oklahoma aquifer, Oklahoma: Hydrologic, water-quality, and quality-assurance data 1987-90

This report presents data collected from 202 wells between June 1987 and September 1990 as part of the Central Oklahoma aquifer pilot study of the National Water-Quality Assessment Program. The report describes the sampling networks, the sampling procedures, and the results of the ground-water quality and quality-assurance sample analyses. The data tables consist of information about the wells sampled and the results of the chemical analyses of ground water and quality-assurance sampling. Chemical analyses of ground-water samples in four sampling networks are presented: A geochemical network, a low-density survey bedrock network, a low-density survey alluvium and terrace deposits network, and a targeted urban network. The analyses generally included physical properties, major ions, nutrients, trace substances, radionuclides, and organic constituents. The chemical analyses of the ground-water samples are presented in five tables: (1) Physical properties and concentrations of major ions, nutrients, and trace substances; (2) concentrations of radionuclides and radioactivities; (3) carbon isotope ratios and delta values (d-values) of selected isotopes; (4) concentrations of organic constituents; and (5) organic constituents not reported in ground-water samples. The quality of the ground water sampled varied substantially. The sum of constituents (dissolved solids) concentrations ranged from 71 to 5,610 milligrams per liter, with 38 percent of the wells sampled exceeding the Secondary Maximum Contaminant Level of 500 milligrams per liter established under the Safe Drinking Water Act. Values of pH ranged from 5.7 to 9.2 units with 20 percent of the wells outside the Secondary Maximum Contaminant Level of 6.5 to 8.5 units. Nitrite plus nitrate concentrations ranged from less than 0.1 to 85 milligrams per liter with 8 percent of the wells exceeding the proposed Maximum Contaminant Level of 10 milligrams per liter. Concentrations of trace substances were highly variable, ranging from below the reporting level to concentrations over the Maximum Contaminant Levels for several constituents (arsenic, barium, cadmium, chromium, lead, and selenium). Radionuclide activities also were highly variable. Gross alpha radioactivity ranged from 0.1 to 210 picocuries per liter as 230thorium. Of the wells sampled, 20 percent exceeded the proposed Maximum Contaminant Level of 15 picocuries per liter for gross alpha radioactivity. Organic constituents were detected in 39 percent of the 170 wells sampled for organic constituents; in most cases concentrations were at or near the laboratory minimum reporting levels. Ten of the wells sampled for organic constituents had one or more constituents (chlordane, dieldrin, heptachlor epoxide, trichloroethylene, 1,1-dichloroethylene, 1,1,1-trichloroethane) at concentrations equal to or greater than the Maximum Contaminant Level or acceptable concentrations as suggested in the Environmental Protection Agency's Health Advisory Summaries. Quality-assurance sampling included duplicate samples, repeated samples, blanks, spikes, and blind samples. These samples proved to be essential in evaluating the accuracy of the data, particularly in the case of volatile organic constituents.

Oklahoma↗

Distribution, persistence, and hydrologic characteristics of salmon spawning habitats in clearwater side channels of the Matanuska River, southcentral Alaska

Turbid, glacially influenced rivers are often considered to be poor salmon spawning and rearing habitats and, consequently, little is known about salmon habitats that do occur within rivers of this type. To better understand salmon spawning habitats in the Matanuska River of southcentral Alaska, the distribution and characteristics of clearwater side-channel spawning habitats were determined and compared to spawning habitats in tributaries. More than 100 kilometers of clearwater side channels within the braided mainstem of the Matanuska River were mapped for 2006 from aerial images and ground-based surveys. In reaches selected for historical analysis, side channel locations shifted appreciably between 1949 and 2006, but the relative abundance of clearwater side channels was fairly stable during the same period. Geospatial analysis of side channel distribution shows side channels typically positioned along abandoned bars at the braid plain margin rather than on bars between mainstem channels, and shows a strong correlation of channel abundance with braid plain width. Physical and geomorphic characteristics of the channel and chemical character of the water measured at 19 side channel sites, 6 tributary sites, 4 spring sites, and 5 mainstem channel sites showed conditions suitable for salmon spawning in side channels and tributaries, and a correlation of side channel characteristics with the respective tributary or groundwater source water. Autumn-through-spring monitoring of intergravel water temperatures adjacent to salmon redds (nests) in three side channels and two tributaries indicate adequate accumulated thermal units for incubation and emergence of salmon in side channels and relatively low accumulated thermal units in tributaries.

Alaska↗

Chapter A6. Section 6.1. Temperature

Accurate temperature measurements are required for accurate determinations of important environmental parameters such as pH, specific electrical conductance, and dissolved oxygen, and to the determination of chemical reaction rates and equilibria, biological activity, and physical fluid properties. This section of the National Field Manual (NFM) describes U.S. Geological Survey (USGS) guidance and protocols for measurement of temperature in air, ground water, and surface water and calibration of the equipment used. Each chapter of the National Field Manual is published separately and revised periodically. Newly published and revised chapters will be announced on the USGS Home Page on the World Wide Web under 'New Publications of the U.S. Geological Survey.'

Techniques of Water-Resources Investigations↗

Report of work done in the division of chemistry and physics mainly during the fiscal year 1884-85

The present bulletin contains some of the more important results obtained in the chemical laboratory of the United States Geological Survey during the fiscal year 1884—'85. It also contains two physical papers representing work which was mainly done during previous fiscal years, but completed during the one for which this bulletin is issued. These papers are practically continuations of or supplements to Bulletin 14.

Bulletin↗

Adsorbed natural gas storage with activated carbons made from Illinois coals and scrap tires

Activated carbons for natural gas storage were produced from Illinois bituminous coals (IBC-102 and IBC-106) and scrap tires by physical activation with steam or CO 2 and by chemical activation with KOH, H 3 PO 4 , or ZnCl 2 . The products were characterized for N 2 -BET area, micropore volume, bulk density, pore size distribution, and volumetric methane storage capacity ( V m / V s ). V m / V s values for Illinois coal-derived carbons ranged from 54 to 83 cm 3 /cm 3 , which are 35−55% of a target value of 150 cm 3 /cm 3 . Both granular and pelletized carbons made with preoxidized Illinois coal gave higher micropore volumes and larger V m / V s values than those made without preoxidation. This confirmed that preoxidation is a desirable step in the production of carbons from caking materials. Pelletization of preoxidized IBC-106 coal, followed by steam activation, resulted in the highest V m / V s value. With roughly the same micropore volume, pelletization alone increased V m / V s of coal carbon by 10%. Tire-derived carbons had V m / V s values ranging from 44 to 53 cm 3 /cm 3 , lower than those of coal carbons due to their lower bulk densities. Pelletization of the tire carbons increased bulk density up to 160%. However, this increase was offset by a decrease in micropore volume of the pelletized materials, presumably due to the pellet binder. As a result, V m / V s values were about the same for granular and pelletized tire carbons. Compared with coal carbons, tire carbons had a higher percentage of mesopores and macropores.

Energy and Fuels↗

Cometary impact and amino acid survival - Chemical kinetics and thermochemistry

The Arrhenius parameters for the initiating reactions in butane thermolysis and the formation of soot, reliable to at least 3000 K, have been applied to the question of the survival of amino acids in cometary impacts on early Earth. The pressure/temperature/time course employed here was that developed in hydrocode simulations for kilometer-sized comets (Pierazzo and Chyba, 1999), with attention to the track below 3000 K where it is shown that potential stabilizing effects of high pressure become unimportant kinetically. The question of survival can then be considered without the need for assignment of activation volumes and the related uncertainties in their application to extreme conditions. The exercise shows that the characteristic times for soot formation in the interval fall well below the cooling periods for impacts ranging from fully vertical down to about 9?? above horizontal. Decarboxylation, which emerges as more rapid than soot formation below 2000-3000 K, continues further down to extremely narrow impact angles, and accordingly cometa??ry delivery of amino acids to early Earth is highly unlikely. ?? 2006 American Chemical Society.

Journal of Physical Chemistry A↗

Data from a thick unsaturated zone underlying Oro Grande and Sheep Creek washes in the western part of the Mojave Desert, near Victorville, San Bernardino County, California

This report presents data on the physical properties of unsaturated alluvial deposits and on the chemical and isotopic composition of soil water and soil gas collected at 12 monitoring sites in the western part of the Mojave Desert, near Victorville, California. Sites were installed using the ODEX air-hammer method. Seven sites were located in the active channels of Oro Grande and Sheep Creek Washes. The remaining five sites were located away from the active washes. Most sites were drilled to a depth of about 100 feet below land surface; two sites were drilled to the water table almost 650 feet below land surface. Drilling procedures, lithologic and geophysical data, and site construction and instrumentation are described. Core material was analyzed for water content, bulk density, water potential, particle size, and water retention. The chemical composition of leachate from almost 1,000 subsamples of cores and cuttings was determined. Water extracted from selected subsamples of cores was analyzed for tritium and the stable isotopes of oxygen and hydrogen. Water from suction-cup lysimeters and soil-gas samples also were analyzed for chemical and isotopic composition. In addition, data on the chemical and isotopic composition of bulk precipitation from five sites and on ground water from two water-table wells are reported.

California↗

Evolving magma storage conditions beneath Mount St. Helens inferred from chemical variations in melt inclusions from the 1980-1986 and current (2004-2006) eruptions

Major element, trace element, and volatile concentrations in 187 glassy melt inclusions and 25 groundmass glasses from the 1980-86 eruption of Mount St. Helens are presented, together with 103 analyses of touching FE-Ti oxide pairs from the same samples. These data are used to evaluate the temporal evolution of the magmatic plumbing system beneath the volcano during 1980-86 and so provide a framework in which to interpret analyses of melt inclusions from the current (2004-2006) eruption. Major and trace element concentrations of all melt inclusions lie at the high SiO 2 end of the data array defined by eruptive products of the late Quaternary age from Mount St. Helens. For several major and trace elements, the glasses define a trend that is oblique to the whole-rock trend, indicating that different mineral assemblages were responsible for the two trends. The whole-rock trend can be ascribed to differentiation of hydrous basaltic parents in a deep-seated magma reservoir, probably at depths great enough to stabilize garnet. In contrast, the glass trends were generated by closed-system crystallization of the phenocryst and microlite mineral assemblages at low pressures. The dissolved H 2 O content of the melt inclusions from 1980-86, as measured by the ion microprobe, ranges from 0 to 6.7 wt. percent, with the highest values obtained from the plinian phase of May 18, 1980. Water contents decrease with increasing SiO 2 , consistent with decompression-driven crystallization. Preliminary data for dissolved CO 2 in melt inclusions from the May 18 plinian phase from August 7, 1980, indicate that X H 2 O in a vapor phase was approximately constant at 0.80, irrespective of H 2 O content, suggestive of closed-system degassing with a high bubble fraction or gas streaming through the subvolcanic system. Temperature and f O 2 estimates for touching Fe-Ti oxides show evidence for heating during crystallization owing to release of latent heat. Consequently, magmas with the highest microlite crystallinities record the highest temperatures. Magmas also become progressively reduced during ascent and degassing, probably as a result of redox equilibria between exsolving S-bearing gases and magmas. The lowest temperature oxides have f O 2 &asymp; NNO, similar to high-temperature fumarole gases from the volcano. The temperature and f O 2 of the magma tapped by the plinian phase of May 18, 1980, are 870-875&deg;C and NNO+0.8, respectively. The dissolved volatile contents of the melt inclusions have been used to calculate sealing pressures; that is, the pressure at which chemical exchange between inclusion and matrix melt ceased. These are greatest for the May 18 plinian magma (120 to 320 MPa); lower pressures are recorded by samples of the preplinian cryptodome and by all post-May 18 magmas. Magma crystallinity, calculated from melt-inclusion Rb contents, is negatively correlated with sealing pressure, consistent with decompression crystallization. Elevated contents of Li in melt inclusions from the cryptodome and post-May 18 samples are consistent with transfer of Li in a magmatic vapor phase from deeper parts of the magma system to magma stored at shallower levels. The Li enrichment attains its maximum extent at ~150 MPa, which is ascribed to separation of a single vapor phase into H 2 O-rich gas and dense Li-rich brine at the top of the magma column. There are striking correlations between melt-inclusion chemistry and monitoring data for the 1980-86 eruption. Dissolved SO 2 contents of melt inclusions from any given event, multiplied by the mass of magma erupted during that event, correlate with the measured flux of SO 2 at the surface, suggesting that magma degassing and melt-inclusion sealing are closely related in time and space. Textural and chemical evidence indicates that melt inclusions became effectively sealed (physically or kinetically) shortly before eruption. Thus by converting pressure to depth using a density model and edifice-loading algorithm for the volcano, changing depths of magma extraction with time can be tracked and compared to the seismic record. The plinian eruption of May 18, 1980, involved magma stored 5-11 km below sea level; this is inferred to be the subvolcanic magma chamber. The preceding eruptions, including the May 18, 1980, blast, involved magma withdrawal from the cryptodome and conduit down to 5 km below sea level. Subsequent 1980 eruptions tapped magma down to depths of &le;10 km below sea level. Tapping of magma stored deeper than 2 km below sea level stopped abruptly at the end of 1980, coincident with the onset of extensive shallow seismicity and a change from explosive to effusive eruption style from 1981 to 1986. Overall, the 1980-86 eruption is consistent with the evisceration of a thin, vertically extensive body of magma extending from 5 to at least 11 km below sea level and connected to the surface by a thin conduit. In the absence of sustained high magma-supply rates from depth, decompression crystallization of magma ascending through the system leads eventually to plugging of the conduit. The current eruption of Mount St. Helens shares some similarities with the 1981-86 dome-building phase of the previous eruption, in that there is extensive shallow seismicity and extrusion of highly crystalline material in the form of a sequence of flows and spines. Melt inclusions from the current eruption have low H 2 O contents, consistent with magma extraction from shallow depths. Highly enriched Li in melt inclusions suggests that vapor transport of Li is a characteristic feature of Mount St. Helens. Melt inclusions from the current eruption have subtly different trace-element chemistry from all but one of the 1980-86 melt inclusions, with steeper rareearth-element (REE) patterns and low U, Th, and high-fieldstrength elements (HFSE), indicating addition of a new melt component to the magma system. It is anticipated that increasing involvement of the new melt component will be evident as the current eruption proceeds.

Washington↗

Assessment of ecological conditions and potential effects of water produced from coalbed natural gas development on biological communities in streams of the Powder River structural basin, Wyoming and Montana, 2005-08

Ongoing development of coalbed natural gas in the Powder River structural basin in Wyoming and Montana led to formation of an interagency task group to address concerns about the effects of the resulting production water on biological communities in streams of the area. The interagency task group developed a monitoring plan and conducted sampling of macroinvertebrate, algal, and fish communities at 47 sites during 2005-08 to document current ecological conditions and determine existing and potential effects of water produced from coalbed natural gas development on biological communities. Macroinvertebrate, algal, and fish community composition varied between drainage basins, among sites within drainage basins, and by year. Macroinvertebrate communities of the main-stem Tongue River were characterized by higher taxa richness and higher abundance of Ephemeroptera, for example, compared to macroinvertebrate communities in plains tributaries of the Tongue River and the main-stem Powder River. Fish communities of the Tongue River were characterized by higher taxa richness and abundance of introduced species compared to the Powder River where native species were dominant. Macroinvertebrate community metric values from sites in the middle reach of the main-stem Powder River, from below Willow Creek to below Crazy Woman Creek, differed from metric values in the upper and lower reaches of the Powder River. Metrics indicative of communitywide differences included measures of taxa richness, relative abundance, feeding mode, and tolerance. Some of the variation in the macroinvertebrate communities could be explained by variation in environmental variables, including physical (turbidity, embeddedness, bed substrate size, and streamflow) and chemical (alkalinity and specific conductance) variables. Of these environmental variables, alkalinity was the best indicator of coalbed natural gas development because of the sodiumbicarbonate signature of the production water. Algal samples from the main-stem Powder River generally confirmed the pattern observed in the macroinvertebrate communities. Algal communities at sites in the middle reach of the Powder River commonly were characterized by dominance by a single taxon and by low biovolume of algae compared to other sites. In contrast to the macroinvertebrate and algal communities, species richness of fish communities was highest in the middle reach of the Powder River. Although a few significant differences in fish metrics were determined along the main-stem Powder River, the differences did not correspond to the pattern observed for the macroinvertebrate and algae communities. Differences in biological communities were noted between years, potentially due to the effects of drought. Macroinvertebrate community metrics, such as Diptera taxa richness, were significantly different in the severe drought year of 2006 from metric values in 2005 and 2007-08. Waterquality data collected during the study indicated that, with few exceptions, water-quality constituents generally did not exceed State or Federal acute and chronic criteria for the protection of aquatic life.

Scientific Investigations Report↗

An index of ecological integrity for the Mississippi alluvial plain ecoregion: index development and relations to selected landscape variables

Macroinvertebrate community, fish community, water-quality, and habitat data collected from 36 sites in the Mississippi Alluvial Plain Ecoregion during 1996-98 by the U.S. Geological Survey were considered for a multimetric test of ecological integrity. Test metrics were correlated to site scores of a Detrended Correspondence Analysis of the fish community (the biological community that was the most statistically significant for indicating ecological conditions in the ecoregion) and six metrics--four fish metrics, one chemical metric (total ammonia plus organic nitrogen) and one physical metric (turbidity)--having the highest correlations were selected for the index. Index results indicate that sites in the northern half of the study unit (in Arkansas and Missouri) were less degraded than sites in the southern half of the study unit (in Louisiana and Mississippi). Of 148 landscape variables evaluated, the percentage of Holocene deposits and cotton insecticide rates had the highest correlations to index of ecological integrity results. sites having the highest (best) index scores had the lowest percentages of Holocene deposits and the lowest cotton insecticide use rates, indicating that factors relating to the amount of Holocene deposits and cotton insecticide use rates partially explain differences in ecological conditions throughout the Mississippi Alluvial Plain Ecoregion.

Arkansas, Kentucky, Louisiana, Mississippi, Missou↗

San Francisco Bay/delta regional monitoring program plankton and water quality pilot study, 1993, in 1993 Annual Report, San Francisco Estuary Regional Monitoring Program for Trace Substances: San Francisco Estuary Institute

The pilot program described here is motivated by a fundamental principle of the Regional Monitoring Strategy, namely &ldquo;...the development of data that will provide information on status and trends in the Estuary.&rdquo; As pointed out in the Strategy, knowledge of status and trends serves two primary purposes: (1) to become aware of or anticipate deleterious conditions in the Estuary, and (2) to assess the effectiveness of management actions. This program addresses these two purposes by focusing on aquatic resources, one of the five key management issues identified by the Comprehensive Conservation and Management Plan and central to the Regional Monitoring Strategy. It also bears on at least two of the other management issues - pollutants and water use. A regional monitoring program must cover many types of resources, including pelagic and benthic channel habitat, shoal habitat, wetlands, river channels, sloughs, and small bays and harbors. This particular program centers on the pelagic channel habitat. However, because of the intimate connection between channel habitat and many or most of these other habitats, channel measurements reflect to some extent the status of and trends in other resource types as well. A primary aim of this program is to provide a high-resolution description of critical aspects of habitat quality, which can be used along with other information (1) to determine the suitability of habitat for aquatic resources; (2) to monitor responsiveness of the habitat to freshwater flow variability; and (3) to provide a context for understanding pollutant distributions. In a single transect, measurements are made throughout the water column at up to 37 stations to define physical (salinity, temperature, suspended particulate matter, and light penetration), chemical (dissolved oxygen) and biological (chlorophyll a ) characteristics that influence both chemical and biological reactions. A second aim of the program is to investigate planktonic indicators of ecosystem structure and function. Phytoplankton production is the major single source of energy for the San Francisco Bay food web. Our measurements of chlorophyll and light penetration can be used to provide an estimate of this production, and therefore the availability of food for organisms at higher trophic levels. Phytoplankton community composition at the species level, which can be a sensitive indicator of habitat change, is also a standard component of this program. Community composition data enable detection of species known to be responsible for harmful or nuisance algal blooms. In 1993, two other indicators were also evaluated, photosynthetic parameters and water column respiration . Photosynthetic parameters partially characterize the physiological state of the phytoplankton and may provide indirect evidence of nutrient deficiency or the effects of pollutants. Water column respiration serves as a simple integrated measure of organic matter metabolism by the plankton, including bacteria, phytoplankton, and microzooplankton. It therefore reflects the total supply of organic matter, whether from photosynthesis, tidal marsh efflux, point sources, or upstream in the Delta. These biological indicators therefore contain much information about the flow of energy into the food web.

California↗

1993 Annual Report: San Francisco estuary regional monitoring program for trace substances

This first annual report of the San Francisco Estuary Regional Monitoring Program contains the results of monitoring measurements made in 1993. Measurements of conventional water quality parameters and trace contaminant concentrations were made at 16 stations throughout the Estuary three times during the year: the wet period (March), during declining Delta outflow (May), and during the dry period (September). Water toxicity tests were conducted at 8 of those stations. Measurements of sediment quality and contaminant concentrations were made at the same 16 stations during the wet and dry sampling periods. Sediment toxicity was measured at 8 of those stations. Transplanted, bagged bivalve bioaccumulation and condition was measured at 11 stations during the wet and dry sampling periods. Water Monitoring. Total or near-total (dissolved + particulate, see text) arsenic, cadmium, selenium, and dissolved (0.45 &micro;m filtered) arsenic, cadmium, copper, nickel, silver, and zinc in water were highest in the South Bay. In general, dissolved metals in water were usually lowest in the Central Bay due to ocean influences. Near-total nickel and total mercury in water were highest in the northern estuary (San Pablo and Suisun Bays). Dissolved chromium and lead were highest at the Sacramento and San Joaquin River confluence stations. Six of the ten dissolved trace metals were highest in March during high runoff. Dissolved and total arsenic, selenium, and near-total cadmium were highest in September. Concentrations of trace organic contaminants are reported for the March sampling period. Total PAHs and PCBs were highest in the South Bay, but PCBs were also high in the Napa River. Dissolved PAHs were highest in the Central Bay, and dissolved PCBs were highest in the Napa River. Total and dissolved pesticides were highest in the Sacramento River and in the Extreme South Bay. Concentrations of trace elements in water (except selenium) were usually closely related with other environmental parameters. Total or near-total metals concentrations in water were most often associated with the amount of particulate material (TSS) in the water. Dissolved concentrations were usually associated with salinity or dissolved organic carbon (DOC) content. Dissolved PAHs were well correlated with TSS, but dissolved and total trace organic contaminants were poorly correlated with other water parameters. Based on deviations from conservative mixing of fresh and salt water, three different patterns of possible sources of metals were identified in 1993. For dissolved chromium and lead, rivers and local runoff appeared to be important sources. For dissolved arsenic, cadmium, copper, and nickel year-round inputs from the South Bay appeared to be important sources. Dissolved mercury, selenium, and zinc were associated with local runoff in the South Bay during the wet period. Dissolved silver did not fit any of these patterns. Although most contaminant concentrations were below water quality objectives, several trace contaminants were above the objectives at some stations. Comparisons to water quality objectives are used as a guide for evaluation of contaminant concentrations, but there are some differences in the way the RMP data are measured and that prescribed for regulatory purposes (see text). Concentrations of 5 metals in water were above EPA or Regional Basin Plan water quality objectives at six stations (see Table 30). Most of these elevated levels occurred at the northern estuary stations. Total PCB concentrations were above EPA human health objectives at all RMP stations. The pesticides chlordane, dieldrin, and DDTs were above the EPA objectives at several RMP stations, particularly at the northern-most, and river confluence stations. Although some of the contaminant concentrations were above water quality objectives, water toxicity tests (96 hour algal growth and 48 hour bivalve larval development tests) did not indicate toxicity (sometimes inconclusive) associated with the water samples collected at any of the RMP stations in 1993. Exposure to Bay San Francisco Estuary Regional Monitoring Program Regional Monitoring Program 1993 Report ii water actually enhanced algal growth at most stations. In addition to the Estuary-wide sampling, the Sacramento and San Joaquin Rivers were sampled upstream from their confluence. Stations in each river were sampled six times over a 6 week period of high flows. In the Sacramento River, seven of the ten dissolved metals measured had concentrations lower than those measured at the river confluence stations. Some metals concentrations in the San Joaquin River were higher, and some were lower than concentrations from the river confluence station. Metals concentrations in the Sacramento River were poorly related to river flow because the station at Rio Vista is under considerable tidal influence. In the San Joaquin River, flows were inversely related to 7 of 10 total metals concentrations. Sediment Monitoring. Concentrations of silver, mercury, and lead in sediment were highest in the South Bay. However, concentrations of most trace metals in sediments were highest in the northern estuary at stations with the finest (silt, clay) sediments. The northern estuary stations with the coarsest (sand, shell) sediments generally had the lowest metals concentrations. There were differences in concentrations of cadmium, lead, and selenium in sediments between the sampling periods, but no consistent trend as to which sampling period had higher values. In September, PAHs and PCBs in sediments were highest in the Central Bay, but pesticides in sediments were highest in the northern estuary and Extreme South Bay. NOAA&rsquo;s Median Effects Ranges (ERM) for sediments were used as a guide for evaluation of sediment contaminant concentrations. Nickel was the only trace contaminant in sediment above the ERM guidelines, and it was high at all RMP stations. These high levels are probably due to natural, geologic sources. Although sediment contaminant concentrations were below ERMs, sediment toxicity tests (10 day amphipod mortality, and 48 hour bivalve larval development in elutriates) indicated toxicity at all stations tested. Sediment factors that could have caused the toxicity were not investigated. Bivalve Bioaccumulation. Mussels, oysters, and freshwater clams were transplanted to the RMP stations to evaluate bioaccumulation of trace substances. Trace metals were bioaccumulated at nearly all RMP stations. However, arsenic, lead, and mercury did not appear to bioaccumulate. There was generally more bioaccumulation during the dry season than during the wet season. In September, PAHs, PCBs, and pesticides accumulated in all samples. Bioaccumulation of PAHs and pesticides was generally highest at the river confluence stations, and the Napa River. PCBs accumulated most at Redwood Creek. There were substantial differences in the degree of bioaccumulation among the species. Oysters appeared to accumulate higher concentrations of trace metals than the other species, especially copper, which may be a natural phenomenon. There are no established tissue contaminant standards for trace metal and organic contaminants. Therefore, comparisons to Median International Standards (MIS) for human consumption, or U.S. Food and Drug Administration (USFDA) action levels for trace organics are used to evaluate the bioaccumulation results. Concentrations of selenium were higher than MIS guidelines at all stations during the wet season. Other trace metal concentrations were higher than MIS guidelines at various stations during one or the other sampling period. However, none of the bivalves contained concentrations above the USFDA or National Academy of Sciences (NAS) guidelines for trace organic contaminants. The transplanted bivalves survived well at all stations except in the Napa River where less than 35% survived during both sampling seasons. Measures of bivalve condition (dry weight, shell volume) indicated that bivalves deployed in the Central Bay grew significantly, but those at most other stations actually lost weight. Whether these differences were due to natural causes such as salinity or food supply, or to contamination, was not determined. Pilot Studies. Two pilot monitoring studies were conducted in 1993. A pilot study of Estuary hydrography and phytoplankton was conducted by scientists from the U.S. Summary Geological Survey in Menlo Park and U.C. Davis. Water column profiles at up to 37 stations were monitored along a transect of the Estuary run monthly between the South Bay and the Delta. The primary objective of this study was to define physical (salinity, temperature, suspended particulate matter, and light penetration), chemical (dissolved oxygen) and biological (chlorophyll a) characteristics of Estuary water that may influence other chemical and biological reactions. A second objective was to investigate planktonic indicators of ecosystem structure and function. The data collected in 1993 showed the extent and duration of the spring phytoplankton bloom in the South Bay, other localized blooms in the northern estuary, the stratification and mixing associated with the entrapment zone in the northern estuary, and mixing in the Estuary resulting from the high rainfall in 1993. Knowledge of the duration and extent of these natural features of the Estuary provide context for interpretation of the RMP contaminant data collected only 3 times per year. Another pilot study of suspended sediment transport processes was conducted by the USGS in Sacramento. This study used continuous recording sensors at Point San Pablo and the Bay Bridge to measure the amount of suspended sediment in the water at mid-depth and near the bottom, as well as tide height. The objectives of this study were to estimate which factors determine suspended solids concentrations in the Central Bay and to collect time series of suspended solids that are appropriate for continuous monitoring of suspended solids and for calibration and validation of numerical models. The investigators determined that spring tides accounted for most of the variation in suspended solids concentrations at the stations monitored, not runoff from the Sacramento or San Joaquin Rivers, or semidiurnal and diurnal tides. Comparisons were also made between measurements made by the continuous recordings and the RMP samples collected during the regular monitoring cruises. The different ways of measuring TSS were generally comparable, however only 3 measurements per year as made by the RMP could not provide the information of TSS variation actually occurring in the Estuary. This information is important because as shown by the RMP data, total contaminant concentrations in Estuary water is largely dependent on the TSS in the water. This implies that the RMP measurements alone cannot determine accurately the range of contaminant concentrations without better characterizing the dynamics of TSS. The RMP Pilot Studies are important to the developing RMP because they will help put RMP measurements into the perspective of Estuary processes and mechanisms at other time scales. The studies can relate those processes to the RMP measurements and will facilitate revision of sampling design and interpretation. Summaries of other monitoring activities pertinent to regional monitoring are also included in the Report: a description of the Regional Board&rsquo;s Bay Protection Studies, the Sacramento Coordinated Monitoring Program, and a wetlands monitoring plan are included.

California↗

Evaluation of toxicity to the amphipod, Hyalella azteca , and to the midge, Chironomus dilutus ; and bioaccumulation by the oligochaete, Lumbriculus variegatus , with exposure to PCB-contaminated sediments from Anniston, Alabama

The U.S. Environmental Protection Agency (USEPA) requested that as part of the remedial investigation for the Anniston, Alabama Polychlorinated Biphenyl (PCB) Site (Anniston PCB Site), that Pharmacia Corporation and Solutia Inc. (P/S) perform long-term reproduction toxicity tests with the amphipod, Hyalella azteca , and the midge, Chironomus dilutus , and bioaccumulation tests with the oligochaete, Lumbriculus variegatus , using sediment samples collected from reference locations and from Operable Unit 4 of the Anniston PCB Site. The sediment toxicity testing and sediment bioaccumulation results will be used by ARCADIS U.S., Inc. (ARCADIS) as part of a weight-of-evidence assessment to evaluate risks and establish sediment remediation goals for contaminants to sediment-dwelling organisms inhabiting the Anniston PCB Site. The goal of this study was to characterize relations between sediment chemistry and sediment toxicity and relations between sediment chemistry and sediment bioaccumulation in samples of sediments collected from the Anniston PCB Site. A total of 32 samples were evaluated from six test sites and one reference site to provide a wide range in concentrations of chemicals of potential concern (COPCs) including PCBs in samples of whole sediment. The goal of this study was not to determine the extent of sediment contamination across the Anniston PCB Site. Hence, the test sites or samples collected from within a test site were not selected to represent the spatial extent of sediment contamination across the Anniston PCB Site. Sediment chemistry, pore-water chemistry, and sediment toxicity data were generated for 26 sediment samples from the Anniston PCB Site. All of the samples were evaluated to determine if they qualified as reference sediment samples. Those samples that met the chemical selection criteria and biological selection criteria were identified as reference samples and used to develop the reference envelope for each toxicity test endpoint. Physical characterization of samples of whole sediment included analyses of grain size, TOC, and nutrients. Organic chemical characterization of samples of whole sediment included PCB homologs and select (13) PCB congeners, parent and alkylated polycyclic aromatic hydrocarbons (PAHs), organochlorine pesticides, and polychlorinated dibenzo-p-dioxins; and dibenzofurans. The PCB aroclors analyzed included 1016, 1221, 1232, 1242, 1248, 1254, 1260, 1262 and 1268. Analyses of whole sediment also included total metals, simultaneously extracted metals, and acid volatile sulfide. Chemical characterization of samples of pore water isolated from samples of whole sediment at the start of the sediment toxicity exposures or at the start of the sediment bioaccumulation exposures included metals, major cations, major anions, dissolved organic carbon, and additional water-quality characteristics. Concentrations of metals or PCBs in pore water during the sediment toxicity exposures or during sediment bioaccumulation exposures also were determined using peeper samples (for metals) or solid-phase microextraction (SPME) samplers (for PCBs). The bioavailability and bioaccumulation of PCBs in 14 sediment samples were investigated using SPME passive samplers and the 28-d L. variegatus whole-sediment bioaccumulation exposures In general the accumulation of PCBs consistently was predicted through the use of organic carbon normalization and equilibrium partitioning. In these sediments, PCB homologs were accumulated differently based on bioavailability and potential to accumulate in oligochaetes. As part of this assessment homolog specific biota sediment accumulation factor values were developed that could be applied across the larger site to predict tissue levels of PCBs. The whole-sediment toxicity tests done with H. azteca and C. dilutus met the established ASTM and USEPA test acceptability criteria. The most responsive H. azteca endpoints were day 42 survival normalized young per female and day 28 biomass and that the most responsive C. dilutus endpoints were adult biomass and percent adult emergence. Overall, between the two species, the most responsive endpoint assessed for these two species was H. azteca survival-normalized young per female (67 percent of the samples classified as toxic). Concentration-response models (CRMs) and site-specific sediment toxicity thresholds (TTs) were generated with matching sediment chemistry and sediment toxicity data. Sediment chemistry, pore-water chemistry, and sediment toxicity data were evaluated for as many as 26 sediment samples from the Anniston PCB Site. The reference-envelope approach was used to identify the sediment samples that were toxic to benthic invertebrates. This procedure involved identification of reference sediment samples, normalizing the toxicity data to reflect control responses, developing a reference envelope for each toxicity test endpoint, and designating each sediment sample as toxic or not toxic for each toxicity test endpoint, for each species, and for all species combined. These results demonstrated percent emergence of adult C. dilutus , biomass of adult C. dilutus , and reproduction of H. azteca normalized to percent survival were among the most responsive endpoints that were evaluated. Therefore, these endpoints were selected for CRM development. The site-specific TTs for whole sediment provide a reliable basis for identifying toxic and not toxic sediment samples in the Anniston PCB Site (that is, for correctly classifying the sediment samples used to derive the TTs as toxic or not toxic, for the endpoint used to derive the TTs). Among the 69 TTs for sediment, the TT LRs for total PCB homologs [499 to 1,870 micrograms per kilogram dry weight (μg/kg DW)] and for lead [(9.48 to 10.3 milligrams per kilogram (mg/kg) DW] based on reproduction of H. azteca or based on emergence or biomass of adult C. dilutus , were the most reliable. Such TTs had low rates of false negative errors (that is, only 0 to 11 percent of the samples below the TT were toxic to benthic invertebrates), low rates of false positive errors (only 0 to 6 percent of the samples greater than the TT were not toxic to benthic invertebrates), and high rates of correct classification (that is, 92 to 96 percent). The site-specific TTs for PCBs and other COPCs derived in this study also were compared to empirically based sediment quality guidelines (SQGs), to equilibrium-partitioning based SQGs, and to the results of spiked-sediment toxicity tests. The results of this evaluation indicated that the site-specific sediment TTs for PCBs were comparable to the consensus-based SQGs that were derived for PCBs. In addition, the site-specific sediment TTs for PCBs are well within the range of SQGs derived using the equilibrium partitioning approach. The site-specific sediment TTs for PCBs also are consistent with the results of chronic TTs that have been estimated for benthic invertebrates using the results of spiked-sediment toxicity tests. As the site-specific sediment TTs for PCBs are consistent with empirically based SQGs, equilibrium-partitioning based SQGs, and results of sediment-spiking studies, these site- specific sediment TTs likely represent the concentrations of PCBs that are sufficient to cause toxicity to benthic invertebrates (as opposed to simply being correlated with adverse effects on the survival, weight, or reproduction of benthic invertebrates). Importantly, such site-specific sediment TTs have been demonstrated to accurately classify sediment samples as toxic or not toxic to benthic invertebrates at the Anniston PCB Site. In contrast, the TTs for metals, PAHs, and organochlorine pesticides were generally lower than consensus-based SQGs (that is, probable effect concentrations), and LC 50s (median lethal effect concentrations) generated in spiked-sediment toxicity tests, indicating that these COPCs are likely not the main contributors to the observed toxicity of the site sediments evaluated in this study. The reproduction endpoint for H. azteca provided lower TTs compared to the day 28 biomass endpoint for H. azteca and the emergence or biomass endpoints for adult C. dilutus provided lower TTs compared to the day 13 biomass endpoint for C. dilutus .

Alabama↗

Physical limnology of Saginaw Bay, Lake Huron

Water temperature and the distribution of various chemicals measured during surveys from June 7 to October 30, 1956, reflect a highly variable and rapidly changing circulation in Saginaw Bay, Lake Huron. The circulation is influenced strongly by local winds and by the stronger circulation of Lake Huron which frequently causes injections of lake water to the inner extremity of the bay. The circulation patterns determined at six times during 1956 reflect the general characteristics of a marine estuary of the northern hemisphere. The prevailing circulation was counterclockwise; the higher concentrations of solutes from the Saginaw River tended to flow and enter Lake Huron along the south shore; water from Lake Huron entered the northeast section of the bay and had a dominant influence on the water along the north shore of the bay. The concentrations of major ions varied little with depth, but a decrease from the inner bay toward Lake Huron reflected the dilution of Saginaw River water as it moved out of the bay. Concentrations in the outer bay were not much greater than in Lake Huron proper. The proportions of various cations and anions were similar to the average proportions for the freshwaters of the world. The average flushing time was 186 days, but was 113 days during the period of peak river discharge. The lakeward transport of Saginaw River water ranged from 619 to 2,294 feet per day in the inner bay to 1,410 to 3,000 feet per day in the outer bay on June 7 and October 30, respectively.

Technical Report↗